The boronizing supply agent of a low-priced solid with RE, the experimental of the boronizing process and the amount of adding RE were studied. The function of RE was discussed. The results show that the symmetrical a...The boronizing supply agent of a low-priced solid with RE, the experimental of the boronizing process and the amount of adding RE were studied. The function of RE was discussed. The results show that the symmetrical and dense boronized layer can be obtained on the surface of steel by using the solid boronizing supply agent with RE element for boronizing, RE can deduce the temperature of boronizing and increase the rate of boronizing and the hardness of boronized layer, and it can also improve the distribution of hardness of boronized layer. The best condition of the solid boronizing supply agent is at 860 ℃ for 4～6 h, and the addition amount of RE is 6%(mass fraction).展开更多
The thickness, brittleness, boron content and morphology of RE boronized layer were investigated. The results show that the service life of the boronized layer in molten zinc can be increased by adding RE element. Th...The thickness, brittleness, boron content and morphology of RE boronized layer were investigated. The results show that the service life of the boronized layer in molten zinc can be increased by adding RE element. The thermocouple and sink roll sleeve made of this material can be used for more than half a year.展开更多
Boronizing and austempering were successively applied to a GGG-40 grade ductile iron in order to combine the advantages of both process in a single treatment. This new procedure formed a 30 μm thick boride layer on t...Boronizing and austempering were successively applied to a GGG-40 grade ductile iron in order to combine the advantages of both process in a single treatment. This new procedure formed a 30 μm thick boride layer on the surface with subsurface matrix structure consisted of acicular ferrite and retained austenite. Reciprocating wear tests showed that successive boronizing and austempering exhibited considerably higher wear resistance than conventional boronizing having a subsurface matrix structure consisting of ferrite and pearlite.展开更多
According to the problems of short life and low strength of TiB2 coating cathode for current technology in aluminium electrolysis industry,this work synthesized TiB2-TiB/Ti gradient composite with TiB2 coating and TiB...According to the problems of short life and low strength of TiB2 coating cathode for current technology in aluminium electrolysis industry,this work synthesized TiB2-TiB/Ti gradient composite with TiB2 coating and TiB whiskers in metallic Ti matrix by a electrolytic boronizing method based on similar density and thermal expansivity of the three materials.The phase composition and morphology of the cross-section were determined by X-ray diffraction(XRD),scanning electronic microscope(SEM)and X-ray energy dispersive spectrum(EDS).The results show that uniform TiB2 layer with a thickness of 8-10μm is continuously coated on the surface while the TiB whisker connected with TiB2 layer was embedded dispersedly into the matrix.The TiB crystal whisker has a maximum length of about 220μm.The growth rate of TiB2 and TiB is enhanced by the strong reduction of B4C.The novel gradient design of the composite helps to extend life and improve strength of the TiB2 cathode in aluminium electrolysis.展开更多
Microstructure and mechanical properties of additively manufactured TC4 alloys were investigated,following boronizing treatment.The treatment process was carried out at temperatures ranging from 950 to 1050°C and...Microstructure and mechanical properties of additively manufactured TC4 alloys were investigated,following boronizing treatment.The treatment process was carried out at temperatures ranging from 950 to 1050°C and held for 8-15 h.The microstructural features of fabricated boride layers were examined by optical microscopy.The phase compositions of the boride layers were analyzed by X-ray diffraction.The hardness profile through the boride layers was also determined.The results showed that the boride layer of additively manufactured TC4 had a thickness of 51 pm and was composed of an outer TiB2 layer on the top of TiB layer;TiB whiskers wedged into the matrix,forming a strong bond between the boride layer and substrate.The diffusion activation energy was determined to be 80.9 kJ/mol.The matrix was found to transfer from needlelikeα'martensite phase toα+βbiphasic compounds.The newly formed boride layer can reach 1680 HV in hardness,thus imparting a strong protection to 3D-printed part.展开更多
The microstructure, thickness, microhardness and wear resistance of single-boronizing, carbonitriding+boronizing and carbonitriding+RE-boronizing layers of 16Mn steel were investigated respectively. Effect of rare ear...The microstructure, thickness, microhardness and wear resistance of single-boronizing, carbonitriding+boronizing and carbonitriding+RE-boronizing layers of 16Mn steel were investigated respectively. Effect of rare earths on microstructure and properties of the penetrated layer were studied and the mechanism of effects of rare earths was discussed. The result showed that the structure, microhardness, brittleness and wear resistance of the penetrated layer after carbonitriding+ RE-boronizing were better than that of conventional boronizing and carbonitriding, especially the wear resistance of boronized layer was increased remarkably. The RE-boronizing layer of the steel is single phase Fe2B, and RE elements enhanced Fe2B (002) direction texture. The distribution of rare earth element (La) in the layer was non-uniform. RE content is higher between borides than that of the interior of borides. An optimum value of the addition of RE element in the agent was 8%. The average service life of the 16Mn steel brick mould treated by carbonitriding+RE-boronizing was 1.5 times as long as the service life of the mould treated by carbonitriding-boronizing.展开更多
Carbide boronizing is a promising approach to obtain fine grained boron carbide based ceramics with improved mechanical properties. In this work, reaction process, microstructural characteristics and mechanical proper...Carbide boronizing is a promising approach to obtain fine grained boron carbide based ceramics with improved mechanical properties. In this work, reaction process, microstructural characteristics and mechanical properties of BxC-TaB2(x = 3.7, 4.9, 7.1) ceramics were comprehensively investigated via this method. Dense BxC-TaB2 ceramics with refined microstructure were obtained from submicro tantalum carbide and boron powder mixtures at 1800℃/50 MPa/5 min by spark plasma sintering. The stoichiometry of boron carbide was determined from lattice parameters and Raman shift. It was found that uniformly distributed TaB2 grains in the BxC matrix is favor of the densification process and restricting grain growth.Besides, planar defects with high density were observed from the as-formed B7.1 C grains and transient stress was considered to contribute to the densification involved with plastic deformation. Microstructural observations indicate the dissolution of oxygen in the TaB2 lattice and most of the B7.1 C/TaB2 phase boundaries were clean. Owing to the highly faulted structure and finer grain size, as-obtained BxC-TaB2 ceramics exhibit high Vickers hardness(33.3–34.4 GPa at 9.8 N) and relatively high flexural strength ranging from 440 to 502 MPa.展开更多
The distribution of electric potential in plasma and paste is measured with samples equipped with probes under various technical conditions. A model of boronizing reaction is proposed based on the chemical reaction in...The distribution of electric potential in plasma and paste is measured with samples equipped with probes under various technical conditions. A model of boronizing reaction is proposed based on the chemical reaction in the boronizing agent. A kinetic law of boronizing is deduced from the measured boronizing rate and the quality change under various temperature, time and discharging power conditions.展开更多
The integration of boronizing and austempering termed boro-austempering treatment is a new processing route for preparing high strength bainitic steel with high surface hardness and high corrosion resistance.The micro...The integration of boronizing and austempering termed boro-austempering treatment is a new processing route for preparing high strength bainitic steel with high surface hardness and high corrosion resistance.The microstructure and properties of a medium-carbon bainitic steel prepared by boro-austempering treatment were characterized and analyzed.The results show that a single Fe_(2)B layer on bainite substrate was obtained with surface hardness of~1400 HV,and the critical load for adhesive failure of borided layer reached 73.6 N.The silicon-rich α-Fe phase in transition zone was clarified as ferrite,which was formed at the beginning stage of cooling process from boronizing to low-temperature bainite transformation.Moreover,the relative potential differences between Fe_(2)B and bainite matrix,and ferrite and bainite matrix were 75 and 92 mV,respectively,with bainite matrix acting as active anode,indicating that the corrosion resistances of Fe2B and ferrite were better than that of bainite.展开更多
Heterogeneous metal-catalyzed chemical conversions with a recyclable catalyst are very ideal and challenging for sustainable organic synthesis.A new bipyridyl-Mo(IV)-carbon nitride(CN-K/Mo-Bpy)was prepared by supporti...Heterogeneous metal-catalyzed chemical conversions with a recyclable catalyst are very ideal and challenging for sustainable organic synthesis.A new bipyridyl-Mo(IV)-carbon nitride(CN-K/Mo-Bpy)was prepared by supporting molybdenum complex on C_(3)N_(4)-K and characterized by FT-IR,XRD,SEM,XPS and ICP-OES.Heterogeneous CN–Mo-Bpy catalyst can be applied to the direct amination of nitroarenes and arylboronic acid,thus constructing various valuable diarylamines in high to excellent yields with a wide substrate scope and good functional group tolerance.It is worth noting that this heterogeneous catalyst has high chemical stability and can be recycled for at least five times without reducing its activity.展开更多
Magnetostrictive Fe-Ga alloys have captivated substantial focus in biomedical applications because of their exceptional transition efficiency and favorable cytocompatibility.Nevertheless,Fe-Ga alloys always exhibit fr...Magnetostrictive Fe-Ga alloys have captivated substantial focus in biomedical applications because of their exceptional transition efficiency and favorable cytocompatibility.Nevertheless,Fe-Ga alloys always exhibit frustrating magnetostriction coefficients when presented in bulk dimensions.It is well-established that the magnetostrictive performance of Fe-Ga alloys is intimately linked to their phase and crystal structures.In this study,various concentrations of boron(B)were doped into Fe_(81)Ga_(19) alloys via the laser-beam powder bed fusion(LPBF)technique to tailor the crystal and phase structures,thereby improving the magnetostrictive performance.The results revealed the capacity for quick solidification of the LPBF process in expediting the solid solution of B element,which increased both lattice distortion and dislocations within the Fe-Ga matrix.These factors contributed to an elevation in the density of the modified-D0_(3) phase structure.Moreover,the prepared Fe-Ga-B alloys also exhibited a(001)preferred grain orientation caused by the high thermal gradients during the LPBF process.As a result,a maximum magnetostriction coefficient of 105 ppm was achieved in the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy.In alternating magnetic fields,all the LPBF-prepared alloys showed good dynamic magnetostriction response without visible hysteresis,while the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy presented a notable enhancement of~30%in magnetostriction coefficient when compared with the Fe_(81)Ga_(19) alloy.Moreover.the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy exhibited favorable biocompatibility and osteogenesis,as confirmed by increased alkaline phosphatase(ALP)activity and the formation of mineralized nodules.These findings suggest that the B-doped Fe-Ga alloys combined with the LPBF technique hold promise for the development of bulk magnetostrictive alloys that are applicable for bone repair applications.展开更多
The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in ...The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.展开更多
Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid ...Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid boron.In this study,we developed a novel approach for efficiently activating boron by introducing alkali metal compounds into the conventional MgO–B system.This approach can be adopted to form various low-melting-point AM–Mg–B–O growth systems.These growth systems have improved catalytic capability and reactivity even under low-temperature conditions,facilitating the synthesis of BNNTs at temperatures as low as 850℃.In addition,molecular dynamics simulations based on density functional theory theoretically demonstrate that the systems maintain a liquid state at low temperatures and interact with N atoms to form BN chains.These findings offer novel insights into the design of boron activation and are expected to facilitate research on the low-temperature synthesis of BNNTs.展开更多
Hard carbon (HC) has been considered as promising anode material for sodium-ion batteries (SIBs).The optimization of hard carbon’s microstructure and solid electrolyte interface (SEI) property are demonstrated effect...Hard carbon (HC) has been considered as promising anode material for sodium-ion batteries (SIBs).The optimization of hard carbon’s microstructure and solid electrolyte interface (SEI) property are demonstrated effective in enhancing the Na+storage capability,however,a one-step regulation strategy to achieve simultaneous multi-scale structures optimization is highly desirable.Herein,we have systematically investigated the effects of boron doping on hard carbon’s microstructure and interface chemistry.A variety of structure characterizations show that appropriate amount of boron doping can increase the size of closed pores via rearrangement of carbon layers with improved graphitization degree,which provides more Na+storage sites.In-situ Fourier transform infrared spectroscopy/electrochemical impedance spectroscopy (FTIR/EIS) and X-ray photoelectron spectroscopy (XPS) analysis demonstrate the presence of more BC3and less B–C–O structures that result in enhanced ion diffusion kinetics and the formation of inorganic rich and robust SEI,which leads to facilitated charge transfer and excellent rate performance.As a result,the hard carbon anode with optimized boron doping content exhibits enhanced rate and cycling performance.In general,this work unravels the critical role of boron doping in optimizing the pore structure,interface chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced Na+storage performance.展开更多
Thermally activated delayed fluorescence(TADF)materials driven by a through-space charge transfer(TSCT)mechanism have garnered wide interest.However,access of TSCT-TADF molecules with longwavelength emission remains a...Thermally activated delayed fluorescence(TADF)materials driven by a through-space charge transfer(TSCT)mechanism have garnered wide interest.However,access of TSCT-TADF molecules with longwavelength emission remains a formidable challenge.In this study,we introduce a novel V-type DA-D-A’emitter,Trz-mCzCbCz,by using a carborane scaffold.This design strategically incorporates carbazole(Cz)and 2,4,6-triphenyl-1,3,5-triazine(Trz)as donor and acceptor moieties,respectively.Theoretical calculations alongside experimental validations affirm the typical TSCT-TADF characteristics of this luminogen.Owing to the unique structural and electronic attributes of carboranes,Trz-mCzCbCz exhibits an orange-red emission,markedly diverging from the traditional blue-to-green emissions observed in classical Cz and Trz-based TADF molecules.Moreover,bright emission in aggregates was observed for Trz-mCzCbCz with absolute photoluminescence quantum yield(PLQY)of up to 88.8%.As such,we have successfully fabricated five organic light-emitting diodes(OLEDs)by utilizing Trz-mCzCbCz as the emitting layer.It is important to note that both the reverse intersystem crossing process and the TADF properties are profoundly influenced by host materials.The fabricated OLED devices reached a maximum external quantum efficiency(EQE)of 12.7%,with an emission peak at 592 nm.This represents the highest recorded efficiency for TSCT-TADF OLEDs employing carborane derivatives as emitting layers.展开更多
The increase in the utilization of infrared heat detection technology in military applications necessitates research on composites with improved thermal transmission performance and microwave absorption capabilities.T...The increase in the utilization of infrared heat detection technology in military applications necessitates research on composites with improved thermal transmission performance and microwave absorption capabilities.This study satisfactorily fabricated a series of MoS_(2)/BN-xyz composites(which were characterized by the weight ratio of MoS_(2)to BN,denoted by xy:z)through chemical vapor depos-ition,which resulted in their improved thermal stability and thermal transmission performance.The results show that the remaining mass of MoS_(2)/BN-101 was as high as 69.25wt%at 800℃under air atmosphere,and a temperature difference of 31.7℃was maintained between the surface temperature and the heating source at a heating temperature of 200℃.Furthermore,MoS_(2)/BN-301 exhibited an im-pressive minimum reflection loss value of-32.21 dB at 4.0 mm and a wide effective attenuation bandwidth ranging from 9.32 to 18.00 GHz(8.68 GHz).Therefore,these simplified synthesized MoS_(2)/BN-xyz composites demonstrate great potential as highly efficient con-tenders for the enhancement of microwave absorption performance and thermal conductance.展开更多
The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the a...The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the amount of acid-impregnated slag dosed on the compressive strength and water resistance of LR-MOC.The results showed that the magnesium element in the boron mud could be maximally leached under the conditions of 1:1 concentration of hydrochloric acid at room temperature,liquid-solid ratio of 2.5 mL·g^(-1),and reaction time of 5 h,and the main products were amorphous SiO_(2) as well as a small amount of magnesium olivine which had not been completely reacted.The LR-MOC prepared using the acid-soaked mixture could reach a softening coefficient of 0.85 for 28 d of water immersion when the molar ratio of MgO/MgCl_(2) was 2.2,the amount of water added was 0 g,and the acid-soaked slag dosing was 40 wt%,which also led to an appreciable late-strength,with an increase of 19.4%in compressive strength at 28 d compared to that at 7 d.Unlike previous studies,LR-MOC prepared in this way has a final strength phase that is not the more easily hydrolysed 3-phase but the lath-like 5-phase.For this phenomenon,we analyzed the mechanism and found that,during the acid leaching process,a part of amorphous SiO_(2) dissolved in the acid leaching solution formed a silica sol,in which Mg^(2+)played a bridging role to make the silica sol more stable.With the addition and hydrolysis of MgO,the silica sol gel coagulation slows down,providing a capping layer to inhibit the hydrolysis of the 5-phase crystals and providing some strength after coagulation.The amorphous SiO_(2) in the other part of the acid-impregnated slag generated M-S-H gel with Mg^(2+)and OH-,which synergised with the dense structure composed of interlocking crystals to improve the water resistance of LR-MOC.展开更多
Boronizing was applied to Inconel 718. In order to obtain the optimal combination of strength and ductility, the borided Inconel 718 was subjected to standard heat treatment. This consists of solution treatment and th...Boronizing was applied to Inconel 718. In order to obtain the optimal combination of strength and ductility, the borided Inconel 718 was subjected to standard heat treatment. This consists of solution treatment and then a two-step aging treatment. The borided layer is composed of the compound layer and the boron diffusion zone. Because of the superior hardness of borides, the borided Inconel 718 exhibits a significant reduction in its wear rate and relatively low coefficient of friction （COF） compared with the unborided Inconel 718. The standard heat treatment efficiently promotes the diffusion of boron into the interior of the material and the generation of new borides （Fe2B, CrB）. The borided layer with standard heat treatment shows much better wear resistance due to the thicker borided layer （313.76 μm）.展开更多
A metal-free,visible-light-induced strategy has been developed for the diborylation of gem-dibromoalkanes.This reaction enables the construction of structurally diverse alkyl gem-diboronates at room temperature via vi...A metal-free,visible-light-induced strategy has been developed for the diborylation of gem-dibromoalkanes.This reaction enables the construction of structurally diverse alkyl gem-diboronates at room temperature via visible-light-induced C—Br bond activation using B2cat2 as the boron source.Through a tandem in-situ dibromination/diborylation process,a onepot transformation from aldehydes to alkyl gem-diboronates has been achieved.Additionally,sunlight irradiation has been demonstrated as a viable alternative for inducing this reaction,enabling gram-scale synthesis with practical applicability.展开更多
The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance dis-parity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction(ORR).In this wor...The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance dis-parity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction(ORR).In this work,we strategi-cally engineer the active site structure of Co-N-C via B substitution,which is accomplished by the pyrolysis of ammonium borate.During this process,the in-situ generated NH_(3)gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure.The well-designed CoB_(1)N_(3)active site endows Co with higher charge density and stronger adsorption energy toward oxygen species,potentially accelerating ORR kinetics.As expected,the resulting Co-B/N-C catalyst exhibited superior ORR performance over Co-N-C counterpart,with 40 mV,and fivefold en-hancement in half-wave potential and turnover frequency(TOF).More importantly,the excellent ORR performance could be translated into membrane electrode assembly(MEA)in a fuel cell test,delivering an impressive peak power density of 824 mW·cm^(-2),which is currently the best among Co-based catalysts under the same conditions.This work not only demon-strates an effective method for designing advanced catalysts,but also affords a highly promising non-precious metal ORR electrocatalyst for fuel cell applications.展开更多
文摘The boronizing supply agent of a low-priced solid with RE, the experimental of the boronizing process and the amount of adding RE were studied. The function of RE was discussed. The results show that the symmetrical and dense boronized layer can be obtained on the surface of steel by using the solid boronizing supply agent with RE element for boronizing, RE can deduce the temperature of boronizing and increase the rate of boronizing and the hardness of boronized layer, and it can also improve the distribution of hardness of boronized layer. The best condition of the solid boronizing supply agent is at 860 ℃ for 4～6 h, and the addition amount of RE is 6%(mass fraction).
文摘The thickness, brittleness, boron content and morphology of RE boronized layer were investigated. The results show that the service life of the boronized layer in molten zinc can be increased by adding RE element. The thermocouple and sink roll sleeve made of this material can be used for more than half a year.
文摘Boronizing and austempering were successively applied to a GGG-40 grade ductile iron in order to combine the advantages of both process in a single treatment. This new procedure formed a 30 μm thick boride layer on the surface with subsurface matrix structure consisted of acicular ferrite and retained austenite. Reciprocating wear tests showed that successive boronizing and austempering exhibited considerably higher wear resistance than conventional boronizing having a subsurface matrix structure consisting of ferrite and pearlite.
基金Project(21473042) supported by the National Natural Science Foundation of ChinaProject(GUIKE-AD18126001) supported by the Guangxi Science and Technology Special Project on Bases and Talents,China
文摘According to the problems of short life and low strength of TiB2 coating cathode for current technology in aluminium electrolysis industry,this work synthesized TiB2-TiB/Ti gradient composite with TiB2 coating and TiB whiskers in metallic Ti matrix by a electrolytic boronizing method based on similar density and thermal expansivity of the three materials.The phase composition and morphology of the cross-section were determined by X-ray diffraction(XRD),scanning electronic microscope(SEM)and X-ray energy dispersive spectrum(EDS).The results show that uniform TiB2 layer with a thickness of 8-10μm is continuously coated on the surface while the TiB whisker connected with TiB2 layer was embedded dispersedly into the matrix.The TiB crystal whisker has a maximum length of about 220μm.The growth rate of TiB2 and TiB is enhanced by the strong reduction of B4C.The novel gradient design of the composite helps to extend life and improve strength of the TiB2 cathode in aluminium electrolysis.
文摘Microstructure and mechanical properties of additively manufactured TC4 alloys were investigated,following boronizing treatment.The treatment process was carried out at temperatures ranging from 950 to 1050°C and held for 8-15 h.The microstructural features of fabricated boride layers were examined by optical microscopy.The phase compositions of the boride layers were analyzed by X-ray diffraction.The hardness profile through the boride layers was also determined.The results showed that the boride layer of additively manufactured TC4 had a thickness of 51 pm and was composed of an outer TiB2 layer on the top of TiB layer;TiB whiskers wedged into the matrix,forming a strong bond between the boride layer and substrate.The diffusion activation energy was determined to be 80.9 kJ/mol.The matrix was found to transfer from needlelikeα'martensite phase toα+βbiphasic compounds.The newly formed boride layer can reach 1680 HV in hardness,thus imparting a strong protection to 3D-printed part.
基金the Natural Science Foundation of Chongqing (2006BB4391)
文摘The microstructure, thickness, microhardness and wear resistance of single-boronizing, carbonitriding+boronizing and carbonitriding+RE-boronizing layers of 16Mn steel were investigated respectively. Effect of rare earths on microstructure and properties of the penetrated layer were studied and the mechanism of effects of rare earths was discussed. The result showed that the structure, microhardness, brittleness and wear resistance of the penetrated layer after carbonitriding+ RE-boronizing were better than that of conventional boronizing and carbonitriding, especially the wear resistance of boronized layer was increased remarkably. The RE-boronizing layer of the steel is single phase Fe2B, and RE elements enhanced Fe2B (002) direction texture. The distribution of rare earth element (La) in the layer was non-uniform. RE content is higher between borides than that of the interior of borides. An optimum value of the addition of RE element in the agent was 8%. The average service life of the 16Mn steel brick mould treated by carbonitriding+RE-boronizing was 1.5 times as long as the service life of the mould treated by carbonitriding-boronizing.
基金financially supported by the National Natural Science Foundation of China (Nos. 51521001 and 51832003)
文摘Carbide boronizing is a promising approach to obtain fine grained boron carbide based ceramics with improved mechanical properties. In this work, reaction process, microstructural characteristics and mechanical properties of BxC-TaB2(x = 3.7, 4.9, 7.1) ceramics were comprehensively investigated via this method. Dense BxC-TaB2 ceramics with refined microstructure were obtained from submicro tantalum carbide and boron powder mixtures at 1800℃/50 MPa/5 min by spark plasma sintering. The stoichiometry of boron carbide was determined from lattice parameters and Raman shift. It was found that uniformly distributed TaB2 grains in the BxC matrix is favor of the densification process and restricting grain growth.Besides, planar defects with high density were observed from the as-formed B7.1 C grains and transient stress was considered to contribute to the densification involved with plastic deformation. Microstructural observations indicate the dissolution of oxygen in the TaB2 lattice and most of the B7.1 C/TaB2 phase boundaries were clean. Owing to the highly faulted structure and finer grain size, as-obtained BxC-TaB2 ceramics exhibit high Vickers hardness(33.3–34.4 GPa at 9.8 N) and relatively high flexural strength ranging from 440 to 502 MPa.
文摘The distribution of electric potential in plasma and paste is measured with samples equipped with probes under various technical conditions. A model of boronizing reaction is proposed based on the chemical reaction in the boronizing agent. A kinetic law of boronizing is deduced from the measured boronizing rate and the quality change under various temperature, time and discharging power conditions.
基金supported by the National Natural Science Foundation of China(Nos.52274392 and 52104381)Natural Science Foundation of Hubei Province(No.2023AFB023)Knowledge Innovation Program of Wuhan-Basi Research(No.2023010201010133).
文摘The integration of boronizing and austempering termed boro-austempering treatment is a new processing route for preparing high strength bainitic steel with high surface hardness and high corrosion resistance.The microstructure and properties of a medium-carbon bainitic steel prepared by boro-austempering treatment were characterized and analyzed.The results show that a single Fe_(2)B layer on bainite substrate was obtained with surface hardness of~1400 HV,and the critical load for adhesive failure of borided layer reached 73.6 N.The silicon-rich α-Fe phase in transition zone was clarified as ferrite,which was formed at the beginning stage of cooling process from boronizing to low-temperature bainite transformation.Moreover,the relative potential differences between Fe_(2)B and bainite matrix,and ferrite and bainite matrix were 75 and 92 mV,respectively,with bainite matrix acting as active anode,indicating that the corrosion resistances of Fe2B and ferrite were better than that of bainite.
基金support for this work by Hebei Education Department(No.JZX2024004)Central Guidance on Local Science and Technology Development Fund of Hebei Province(No.236Z1404G)+3 种基金the National Natural Science Foundation of China(Nos.22301060 and 21272053)China Postdoctoral Science Foundation(No.2023M730914)the Natural Science Foundation of Hebei Province(Biopharmaceutical Joint Fund No.B2022206008)Project of Science and Technology Department of Hebei Province(No.22567622H)。
文摘Heterogeneous metal-catalyzed chemical conversions with a recyclable catalyst are very ideal and challenging for sustainable organic synthesis.A new bipyridyl-Mo(IV)-carbon nitride(CN-K/Mo-Bpy)was prepared by supporting molybdenum complex on C_(3)N_(4)-K and characterized by FT-IR,XRD,SEM,XPS and ICP-OES.Heterogeneous CN–Mo-Bpy catalyst can be applied to the direct amination of nitroarenes and arylboronic acid,thus constructing various valuable diarylamines in high to excellent yields with a wide substrate scope and good functional group tolerance.It is worth noting that this heterogeneous catalyst has high chemical stability and can be recycled for at least five times without reducing its activity.
基金supported by the National Natural Science Foundation of China(Nos.52275395,51935014,and 82072084)the Science and Technology Innovation Program of Hunan Province(No.2023RC3046)+4 种基金the Young Elite Scientists Sponsorship Program byCAST(No.2020QNRC002)the NationalKeyResearchand Development Program of China(No.2023YFB4605800)the Central South University Innovation-Driven Research Programme(No.2023CXQD023)the Jiangxi Provincial Natural Science Foundation of China(No.20224ACB204013)the Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University.
文摘Magnetostrictive Fe-Ga alloys have captivated substantial focus in biomedical applications because of their exceptional transition efficiency and favorable cytocompatibility.Nevertheless,Fe-Ga alloys always exhibit frustrating magnetostriction coefficients when presented in bulk dimensions.It is well-established that the magnetostrictive performance of Fe-Ga alloys is intimately linked to their phase and crystal structures.In this study,various concentrations of boron(B)were doped into Fe_(81)Ga_(19) alloys via the laser-beam powder bed fusion(LPBF)technique to tailor the crystal and phase structures,thereby improving the magnetostrictive performance.The results revealed the capacity for quick solidification of the LPBF process in expediting the solid solution of B element,which increased both lattice distortion and dislocations within the Fe-Ga matrix.These factors contributed to an elevation in the density of the modified-D0_(3) phase structure.Moreover,the prepared Fe-Ga-B alloys also exhibited a(001)preferred grain orientation caused by the high thermal gradients during the LPBF process.As a result,a maximum magnetostriction coefficient of 105 ppm was achieved in the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy.In alternating magnetic fields,all the LPBF-prepared alloys showed good dynamic magnetostriction response without visible hysteresis,while the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy presented a notable enhancement of~30%in magnetostriction coefficient when compared with the Fe_(81)Ga_(19) alloy.Moreover.the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy exhibited favorable biocompatibility and osteogenesis,as confirmed by increased alkaline phosphatase(ALP)activity and the formation of mineralized nodules.These findings suggest that the B-doped Fe-Ga alloys combined with the LPBF technique hold promise for the development of bulk magnetostrictive alloys that are applicable for bone repair applications.
基金support from the National Natural Science Foundation of China(22268025,52473083,and 22475176)Key Research and Development Program of Yunnan Province(202403AP140036)+2 种基金Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)Applied Basic Research Program of Yunnan Province(202201AT070115 and 202201BE070001-031)supported by the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57).
文摘The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.
基金supported by the National Natural Science Foundation of China(No.51972162)the Fundamental Research Funds for the Central Universities(No.2024300440).
文摘Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid boron.In this study,we developed a novel approach for efficiently activating boron by introducing alkali metal compounds into the conventional MgO–B system.This approach can be adopted to form various low-melting-point AM–Mg–B–O growth systems.These growth systems have improved catalytic capability and reactivity even under low-temperature conditions,facilitating the synthesis of BNNTs at temperatures as low as 850℃.In addition,molecular dynamics simulations based on density functional theory theoretically demonstrate that the systems maintain a liquid state at low temperatures and interact with N atoms to form BN chains.These findings offer novel insights into the design of boron activation and are expected to facilitate research on the low-temperature synthesis of BNNTs.
基金National Key Research and Development Program of China (2022YFE0206300)National Natural Science Foundation of China (U21A2081,22075074, 22209047)+3 种基金Guangdong Basic and Applied Basic Research Foundation (2024A1515011620)Hunan Provincial Natural Science Foundation of China (2024JJ5068)Foundation of Yuelushan Center for Industrial Innovation (2023YCII0119)Student Innovation Training Program (S202410532594,S202410532357)。
文摘Hard carbon (HC) has been considered as promising anode material for sodium-ion batteries (SIBs).The optimization of hard carbon’s microstructure and solid electrolyte interface (SEI) property are demonstrated effective in enhancing the Na+storage capability,however,a one-step regulation strategy to achieve simultaneous multi-scale structures optimization is highly desirable.Herein,we have systematically investigated the effects of boron doping on hard carbon’s microstructure and interface chemistry.A variety of structure characterizations show that appropriate amount of boron doping can increase the size of closed pores via rearrangement of carbon layers with improved graphitization degree,which provides more Na+storage sites.In-situ Fourier transform infrared spectroscopy/electrochemical impedance spectroscopy (FTIR/EIS) and X-ray photoelectron spectroscopy (XPS) analysis demonstrate the presence of more BC3and less B–C–O structures that result in enhanced ion diffusion kinetics and the formation of inorganic rich and robust SEI,which leads to facilitated charge transfer and excellent rate performance.As a result,the hard carbon anode with optimized boron doping content exhibits enhanced rate and cycling performance.In general,this work unravels the critical role of boron doping in optimizing the pore structure,interface chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced Na+storage performance.
基金supported by the Natural Science Foundation of Jiangsu Province(No.BZ2022007)the National Natural Science Foundation of China(No.92261202)+1 种基金the Ministry of Science and Technology of the People’s Republic of China(No.2021YFE0114800)the Ministry of Science and Higher Education of the Russian Federation(No.075-15-2021-1027).
文摘Thermally activated delayed fluorescence(TADF)materials driven by a through-space charge transfer(TSCT)mechanism have garnered wide interest.However,access of TSCT-TADF molecules with longwavelength emission remains a formidable challenge.In this study,we introduce a novel V-type DA-D-A’emitter,Trz-mCzCbCz,by using a carborane scaffold.This design strategically incorporates carbazole(Cz)and 2,4,6-triphenyl-1,3,5-triazine(Trz)as donor and acceptor moieties,respectively.Theoretical calculations alongside experimental validations affirm the typical TSCT-TADF characteristics of this luminogen.Owing to the unique structural and electronic attributes of carboranes,Trz-mCzCbCz exhibits an orange-red emission,markedly diverging from the traditional blue-to-green emissions observed in classical Cz and Trz-based TADF molecules.Moreover,bright emission in aggregates was observed for Trz-mCzCbCz with absolute photoluminescence quantum yield(PLQY)of up to 88.8%.As such,we have successfully fabricated five organic light-emitting diodes(OLEDs)by utilizing Trz-mCzCbCz as the emitting layer.It is important to note that both the reverse intersystem crossing process and the TADF properties are profoundly influenced by host materials.The fabricated OLED devices reached a maximum external quantum efficiency(EQE)of 12.7%,with an emission peak at 592 nm.This represents the highest recorded efficiency for TSCT-TADF OLEDs employing carborane derivatives as emitting layers.
基金supported by the Science and Technology Department of Qinghai Province,China(No.2022-ZJ-932Q).
文摘The increase in the utilization of infrared heat detection technology in military applications necessitates research on composites with improved thermal transmission performance and microwave absorption capabilities.This study satisfactorily fabricated a series of MoS_(2)/BN-xyz composites(which were characterized by the weight ratio of MoS_(2)to BN,denoted by xy:z)through chemical vapor depos-ition,which resulted in their improved thermal stability and thermal transmission performance.The results show that the remaining mass of MoS_(2)/BN-101 was as high as 69.25wt%at 800℃under air atmosphere,and a temperature difference of 31.7℃was maintained between the surface temperature and the heating source at a heating temperature of 200℃.Furthermore,MoS_(2)/BN-301 exhibited an im-pressive minimum reflection loss value of-32.21 dB at 4.0 mm and a wide effective attenuation bandwidth ranging from 9.32 to 18.00 GHz(8.68 GHz).Therefore,these simplified synthesized MoS_(2)/BN-xyz composites demonstrate great potential as highly efficient con-tenders for the enhancement of microwave absorption performance and thermal conductance.
基金Funded by Provincial Basic Research Projects(No.LJKMZ20220947)。
文摘The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the amount of acid-impregnated slag dosed on the compressive strength and water resistance of LR-MOC.The results showed that the magnesium element in the boron mud could be maximally leached under the conditions of 1:1 concentration of hydrochloric acid at room temperature,liquid-solid ratio of 2.5 mL·g^(-1),and reaction time of 5 h,and the main products were amorphous SiO_(2) as well as a small amount of magnesium olivine which had not been completely reacted.The LR-MOC prepared using the acid-soaked mixture could reach a softening coefficient of 0.85 for 28 d of water immersion when the molar ratio of MgO/MgCl_(2) was 2.2,the amount of water added was 0 g,and the acid-soaked slag dosing was 40 wt%,which also led to an appreciable late-strength,with an increase of 19.4%in compressive strength at 28 d compared to that at 7 d.Unlike previous studies,LR-MOC prepared in this way has a final strength phase that is not the more easily hydrolysed 3-phase but the lath-like 5-phase.For this phenomenon,we analyzed the mechanism and found that,during the acid leaching process,a part of amorphous SiO_(2) dissolved in the acid leaching solution formed a silica sol,in which Mg^(2+)played a bridging role to make the silica sol more stable.With the addition and hydrolysis of MgO,the silica sol gel coagulation slows down,providing a capping layer to inhibit the hydrolysis of the 5-phase crystals and providing some strength after coagulation.The amorphous SiO_(2) in the other part of the acid-impregnated slag generated M-S-H gel with Mg^(2+)and OH-,which synergised with the dense structure composed of interlocking crystals to improve the water resistance of LR-MOC.
基金Projects(2011CB013402,201303002,2014028002)supported by the National Basic Research Program of China
文摘Boronizing was applied to Inconel 718. In order to obtain the optimal combination of strength and ductility, the borided Inconel 718 was subjected to standard heat treatment. This consists of solution treatment and then a two-step aging treatment. The borided layer is composed of the compound layer and the boron diffusion zone. Because of the superior hardness of borides, the borided Inconel 718 exhibits a significant reduction in its wear rate and relatively low coefficient of friction （COF） compared with the unborided Inconel 718. The standard heat treatment efficiently promotes the diffusion of boron into the interior of the material and the generation of new borides （Fe2B, CrB）. The borided layer with standard heat treatment shows much better wear resistance due to the thicker borided layer （313.76 μm）.
文摘A metal-free,visible-light-induced strategy has been developed for the diborylation of gem-dibromoalkanes.This reaction enables the construction of structurally diverse alkyl gem-diboronates at room temperature via visible-light-induced C—Br bond activation using B2cat2 as the boron source.Through a tandem in-situ dibromination/diborylation process,a onepot transformation from aldehydes to alkyl gem-diboronates has been achieved.Additionally,sunlight irradiation has been demonstrated as a viable alternative for inducing this reaction,enabling gram-scale synthesis with practical applicability.
基金the National Key Research and Development Program of China(2022YFB4004100)National Natural Science Foundation of China(22272161,22179126)+1 种基金the Jilin Province Science and Technology Development Program(YDZJ202202CXJD011,20240101019JC)Jilin Province major science and technology project(222648GX0105103875)for financial supports.
文摘The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance dis-parity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction(ORR).In this work,we strategi-cally engineer the active site structure of Co-N-C via B substitution,which is accomplished by the pyrolysis of ammonium borate.During this process,the in-situ generated NH_(3)gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure.The well-designed CoB_(1)N_(3)active site endows Co with higher charge density and stronger adsorption energy toward oxygen species,potentially accelerating ORR kinetics.As expected,the resulting Co-B/N-C catalyst exhibited superior ORR performance over Co-N-C counterpart,with 40 mV,and fivefold en-hancement in half-wave potential and turnover frequency(TOF).More importantly,the excellent ORR performance could be translated into membrane electrode assembly(MEA)in a fuel cell test,delivering an impressive peak power density of 824 mW·cm^(-2),which is currently the best among Co-based catalysts under the same conditions.This work not only demon-strates an effective method for designing advanced catalysts,but also affords a highly promising non-precious metal ORR electrocatalyst for fuel cell applications.
