The treatment of malignant bone tumors by chemotherapeutics often receives poor therapeutic response due to the specific physiological bone environment,and thus calls for the development of new therapeutic options.Her...The treatment of malignant bone tumors by chemotherapeutics often receives poor therapeutic response due to the specific physiological bone environment,and thus calls for the development of new therapeutic options.Here,we reported a bone-targeted protein nanomedicine for this purpose.Saporin,a toxin protein,was co-assembled with a boronated polymer for intracellular protein delivery,and the formed nanoparticles were further coated with an anionic polymer poly(aspartic acid)to shield the positive charges on nanoparticles and provide the bone targeting function.The prepared ternary complex nanoparticles showed high bone accumulation both in vitro and in vivo,and could reverse the surface charge property from negative to positive after locating at tumor site triggered by tumor extracellular acidity.The boronated polymer in the de-shielded nanoparticles further promote intracellular delivery of saporin into tumor cells,exerting the anticancer activity of saporin by inactivation of ribosomes.As a result,the bone-targeted and saporin-loaded nanomedicine could kill cancer cells at a low saporin dose,and efficiently prevented the progression of osteosarcoma xenograft tumors and bone metastatic breast cancer in vivo.This study provides a facile and promising strategy to develop protein-based nanomedicines for the treatment of malignant bone tumors.展开更多
This study investigates the performance boundaries of ramjet and scramjet engines fueled by boronbased propellant through full-scale engine modeling and three-dimensional computational fluid dynamics simulations.Resul...This study investigates the performance boundaries of ramjet and scramjet engines fueled by boronbased propellant through full-scale engine modeling and three-dimensional computational fluid dynamics simulations.Results show that the performance boundary between ramjets and scramjets occurs near Mach 7.Specifically,at Mach 6,the ramjet exhibits a 1290 m/s higher specific impulse than the scramjet;however,at Mach 7,their performance becomes comparable.The ramjet's higher static temperature promotes boron particle vaporization and B_(2)O_(2) dissociation,limiting the total temperature increase,unlike in scramjets.The boron vapor mass fraction significantly impacts this temperature difference,with ramjets exhibiting values 8.5 and 3.9 times higher than scramjets at Mach 6 and Mach 7,respectively.Despite lower total temperatures,ramjets achieve more efficient boron combustion due to the combined effects of higher pressures and longer particle residence times.These findings offer valuable insights for engine designers in selecting ramjet or scramjet configurations for boron-fueled propulsion systems.展开更多
Boron has attracted increasing attention in the field of high-energy explosives and propellants due to its high volume calorific value and mass calorific value.However,the complicated combustion process and low combus...Boron has attracted increasing attention in the field of high-energy explosives and propellants due to its high volume calorific value and mass calorific value.However,the complicated combustion process and low combustion efficiency hinder its wide application.To tackle this challenge,bioinspired polydopamine(PDA)interface reinforced boron-Viton composites,with high structure stability and excellent energy releasing efficiency,are designed and prepared,combining the interface regulation of PDA biomimetic materials and combustion promotion of fluoropolymers.Firstly,the stronger adsorption energy of PDA with boron compared to Viton is demonstrated by molecular dynamics simulations.Next,B@PDA@Viton is prepared by the combination of in-situ dopamine polymerization and solvent/nonsolvent method,and the double-layer core-shell structure is confirmed by XPS,FTIR,and TEM characterizations.TG-DSC analysis shows that B@PDA@Viton possesses superior thermal properties,with a 55.48%increase in oxidation heat compared to raw B.Furthermore,ignition and combustion performance tests indicate that B@PDA@Viton reduces ignition delay by 57.56%and increases heat of combustion by 68.63%relative to raw B.These findings elucidate the ignition and combustion mechanisms of B@PDA@Viton.This work not only developed high-performance boron-based composite fuels but also provided insights into the development of boron-based fuels.展开更多
Peroxymonosulfate(PMS)-based advanced oxidation processes(AOPs)are an effective way to remove emerging contaminants(ECs)from water.The catalytic process involving PMS is hindered by the suboptimal electron trans-fer e...Peroxymonosulfate(PMS)-based advanced oxidation processes(AOPs)are an effective way to remove emerging contaminants(ECs)from water.The catalytic process involving PMS is hindered by the suboptimal electron trans-fer efficiency of current catalysts,the further application of AOPs technology is limited.Here,it is proposed that the interfacial electric field can be controlled by bor(B)-doped FeNC catalysts,which shows significant advantages in the efficient generation,release and participation of reactive oxygen species(ROS)in the reaction.The super exchange interaction between Fe sites and N and B sites is realized through the directional transfer of electrons in the interfacial electric field,which ensures the high efficiency and stability of the PMS catalytic process.B doping increases the d orbitals distribution at Fermi level,which facilitates enhanced electron transition activity,thereby promoting the effective generation of (1)^O_(2).At the same time,orbital hybridization causes the center of the d band to move to a lower energy level,which not only contributes to the desorption process of (1)^O_(2),but also accelerates its release.In addition,B-doping also improved the adsorption capacity of organic pollutants and shortened the migration distance of ROS,thereby significantly improving the degradation efficiency of ECs.The B-doping strategy outlined offers a novel approach to the development of FeNC catalysts,it lays a theoretical foundation and offers technical insights for the integration of PMS/AOPs technology in the ECs management.展开更多
The electronic states of the smallest boron cluster B_(3)with excitation energies up to 5 e V are systematically investigated.Geometries and spectroscopic constants for the low-lying electronic states were calculated ...The electronic states of the smallest boron cluster B_(3)with excitation energies up to 5 e V are systematically investigated.Geometries and spectroscopic constants for the low-lying electronic states were calculated using the multireference configuration interaction method with Davidson correction(MRCI+Q).The nondegenerate 1^(2)B_(2)and 2^(2)A_(1)states are arising from the degenerate~2E~′state in D_(3h)symmetry,this is also the case for 2^(2)B_(2)and 3~2A_(1).Furthermore,vertical excitation energies,oscillator strengths,main configurations,and transitions of the excited state of B_(3)were determined.Notably,the theoretically predicted wavelengths for the X^(2)A_(1)→2^(2)A_(1)and X^(2)A_(1)→2^(2)B_(2)electronic transitions(728 nm and 457 nm,respectively)exhibit excellent agreements with experimental absorption bands observed at 736 nm and 458 nm.These theoretical findings provide critical insights into the electronic structure and geometric configuration of the B_(3)cluster.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
The combined effects of macronutrients(Nitrogen,Phosphorus,and Potassium-N,P,K)and micronutrient fertilization on turmeric yield,soil enzymatic activity,microbial biomass,and nutrient dynamics remains poorly understoo...The combined effects of macronutrients(Nitrogen,Phosphorus,and Potassium-N,P,K)and micronutrient fertilization on turmeric yield,soil enzymatic activity,microbial biomass,and nutrient dynamics remains poorly understood,despite their significance for sustainable soil fertility management and optimizing crop productivity across diverse agroecosystems.To investigate,a net house experiment on sandy loam Haplic Chernozem was conducted to 03 fertilizer regimes,viz.N_(75)P_(50)K_(50)kg ha^(−1)(T-2),N_(12)5P_(100)K_(100)kg ha^(−1)(T-3),and N_(100)P_(75)K_(75)+B_(3)Zn_(6)Fe_(6)kg ha^(−1)(T-4).Furthermore,the influence of these treatments was systematically assessed on soil nutrient status(N,P,K),enzymatic activities(alkaline phosphomonoesterase,dehydrogenase,fluorescein diacetate hydrolysis),microbial biomass carbon(MBC)and soil organic carbon(SOC).Balanced fertilization significantly turmeric productivity and soil health.All three fertilizer treatments showed a clear yield increase compared to the unfertilized control.Compared to the control,N_(75)P_(50)K_(50)kg/ha T-2 increased rhizome number and biomass per plant by 44.7%and 16.3%,respectively,while N_(100)P_(75)K_(75)+B_(3)Zn_(6)Fe_(6)kg/ha T-4 further enhanced them by 86.6%and 27.7%.T-3 produced the most significant yield response by increasing the rhizome biomass by 38.0%and rhizome number per plant by 100%compared to the control.The nutrient availability was also substantially improved.T-2 enhanced the soil nitrogen contents by 83.3%with maximum N levels observed in T-3&T-4.Phosphorus increased by 61.5%in T-3 and 37.3%in T-4,while potassium was enhanced by 12.9%in T-3 relative to the control,respectively.Enzymatic activities were markedly enhanced as T-3 was recorded to improve alkaline phosphomonoesterase(APA),dehydrogenase(DHA)and fluorescein diacetate hydrolysis(FDA)by 50.6%,37.4%,and 43.4%,where T-4 increased by 32.2%,30.9%,and 35.9%,respectively compared to control.MBC and SOC also rose significantly,with SOC increased by 13.8%(T-2),41.6%(T-3),and 47.2%(T-3)relative to control.The result of this study demonstrates that the integrated macroµnutrient fertilization,particularly T-37 T-4 treatments,sustainably enhanced turmeric yield,soil nutrient availability,enzyme activity,microbial biomass,and organic carbon.These findings highlight the critical role of balanced nutrient management in sustaining soil fertility and crop productivity across agroecosystems.展开更多
Heterogeneous metal-catalyzed chemical conversions with a recyclable catalyst are very ideal and challenging for sustainable organic synthesis.A new bipyridyl-Mo(IV)-carbon nitride(CN-K/Mo-Bpy)was prepared by supporti...Heterogeneous metal-catalyzed chemical conversions with a recyclable catalyst are very ideal and challenging for sustainable organic synthesis.A new bipyridyl-Mo(IV)-carbon nitride(CN-K/Mo-Bpy)was prepared by supporting molybdenum complex on C_(3)N_(4)-K and characterized by FT-IR,XRD,SEM,XPS and ICP-OES.Heterogeneous CN–Mo-Bpy catalyst can be applied to the direct amination of nitroarenes and arylboronic acid,thus constructing various valuable diarylamines in high to excellent yields with a wide substrate scope and good functional group tolerance.It is worth noting that this heterogeneous catalyst has high chemical stability and can be recycled for at least five times without reducing its activity.展开更多
The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in ...The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.展开更多
Hard carbon (HC) has been considered as promising anode material for sodium-ion batteries (SIBs).The optimization of hard carbon’s microstructure and solid electrolyte interface (SEI) property are demonstrated effect...Hard carbon (HC) has been considered as promising anode material for sodium-ion batteries (SIBs).The optimization of hard carbon’s microstructure and solid electrolyte interface (SEI) property are demonstrated effective in enhancing the Na+storage capability,however,a one-step regulation strategy to achieve simultaneous multi-scale structures optimization is highly desirable.Herein,we have systematically investigated the effects of boron doping on hard carbon’s microstructure and interface chemistry.A variety of structure characterizations show that appropriate amount of boron doping can increase the size of closed pores via rearrangement of carbon layers with improved graphitization degree,which provides more Na+storage sites.In-situ Fourier transform infrared spectroscopy/electrochemical impedance spectroscopy (FTIR/EIS) and X-ray photoelectron spectroscopy (XPS) analysis demonstrate the presence of more BC3and less B–C–O structures that result in enhanced ion diffusion kinetics and the formation of inorganic rich and robust SEI,which leads to facilitated charge transfer and excellent rate performance.As a result,the hard carbon anode with optimized boron doping content exhibits enhanced rate and cycling performance.In general,this work unravels the critical role of boron doping in optimizing the pore structure,interface chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced Na+storage performance.展开更多
It is important to understand the evolution of the matter on the polymer membrane surface.The in situ and real-time monitoring of the membrane surface will not only favor the investigation of selective layer formation...It is important to understand the evolution of the matter on the polymer membrane surface.The in situ and real-time monitoring of the membrane surface will not only favor the investigation of selective layer formation but can also track the fouling process during operation.Herein,an aggregation-induced emission(AIE)-active polymer membrane was prepared by the interfacial polymerization of a cyclodextrin-based glycocluster(CD@Glucose)and a tetraphenylethylene derivative modified with boronic acid groups(TPEDB)on the surface of a polyacrylonitrile(PAN)ultrafiltration membrane.This interfacial polymerization method can be stacked layer-by-layer to regulate the hydrophilicity and pore structure of the membrane.With the increase in the number of polymer layers,the separation and antifouling properties of the membrane gradually improved.Owing to the AIE property of the crosslinking agent TPEDB,the occurrence of interfacial polymerization and the degree of fouling during membrane operation can be monitored by the fluorescence distribution and intensity.With the aggravation of membrane fouling,the fluorescence decreased gradually,but recovered after cleaning.Therefore,this AIE effect can be used for real-time monitoring of interfacial polymerization as well as membrane fouling.展开更多
Magnetostrictive Fe-Ga alloys have captivated substantial focus in biomedical applications because of their exceptional transition efficiency and favorable cytocompatibility.Nevertheless,Fe-Ga alloys always exhibit fr...Magnetostrictive Fe-Ga alloys have captivated substantial focus in biomedical applications because of their exceptional transition efficiency and favorable cytocompatibility.Nevertheless,Fe-Ga alloys always exhibit frustrating magnetostriction coefficients when presented in bulk dimensions.It is well-established that the magnetostrictive performance of Fe-Ga alloys is intimately linked to their phase and crystal structures.In this study,various concentrations of boron(B)were doped into Fe_(81)Ga_(19) alloys via the laser-beam powder bed fusion(LPBF)technique to tailor the crystal and phase structures,thereby improving the magnetostrictive performance.The results revealed the capacity for quick solidification of the LPBF process in expediting the solid solution of B element,which increased both lattice distortion and dislocations within the Fe-Ga matrix.These factors contributed to an elevation in the density of the modified-D0_(3) phase structure.Moreover,the prepared Fe-Ga-B alloys also exhibited a(001)preferred grain orientation caused by the high thermal gradients during the LPBF process.As a result,a maximum magnetostriction coefficient of 105 ppm was achieved in the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy.In alternating magnetic fields,all the LPBF-prepared alloys showed good dynamic magnetostriction response without visible hysteresis,while the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy presented a notable enhancement of~30%in magnetostriction coefficient when compared with the Fe_(81)Ga_(19) alloy.Moreover.the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy exhibited favorable biocompatibility and osteogenesis,as confirmed by increased alkaline phosphatase(ALP)activity and the formation of mineralized nodules.These findings suggest that the B-doped Fe-Ga alloys combined with the LPBF technique hold promise for the development of bulk magnetostrictive alloys that are applicable for bone repair applications.展开更多
Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid ...Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid boron.In this study,we developed a novel approach for efficiently activating boron by introducing alkali metal compounds into the conventional MgO–B system.This approach can be adopted to form various low-melting-point AM–Mg–B–O growth systems.These growth systems have improved catalytic capability and reactivity even under low-temperature conditions,facilitating the synthesis of BNNTs at temperatures as low as 850℃.In addition,molecular dynamics simulations based on density functional theory theoretically demonstrate that the systems maintain a liquid state at low temperatures and interact with N atoms to form BN chains.These findings offer novel insights into the design of boron activation and are expected to facilitate research on the low-temperature synthesis of BNNTs.展开更多
Thermally activated delayed fluorescence(TADF)materials driven by a through-space charge transfer(TSCT)mechanism have garnered wide interest.However,access of TSCT-TADF molecules with longwavelength emission remains a...Thermally activated delayed fluorescence(TADF)materials driven by a through-space charge transfer(TSCT)mechanism have garnered wide interest.However,access of TSCT-TADF molecules with longwavelength emission remains a formidable challenge.In this study,we introduce a novel V-type DA-D-A’emitter,Trz-mCzCbCz,by using a carborane scaffold.This design strategically incorporates carbazole(Cz)and 2,4,6-triphenyl-1,3,5-triazine(Trz)as donor and acceptor moieties,respectively.Theoretical calculations alongside experimental validations affirm the typical TSCT-TADF characteristics of this luminogen.Owing to the unique structural and electronic attributes of carboranes,Trz-mCzCbCz exhibits an orange-red emission,markedly diverging from the traditional blue-to-green emissions observed in classical Cz and Trz-based TADF molecules.Moreover,bright emission in aggregates was observed for Trz-mCzCbCz with absolute photoluminescence quantum yield(PLQY)of up to 88.8%.As such,we have successfully fabricated five organic light-emitting diodes(OLEDs)by utilizing Trz-mCzCbCz as the emitting layer.It is important to note that both the reverse intersystem crossing process and the TADF properties are profoundly influenced by host materials.The fabricated OLED devices reached a maximum external quantum efficiency(EQE)of 12.7%,with an emission peak at 592 nm.This represents the highest recorded efficiency for TSCT-TADF OLEDs employing carborane derivatives as emitting layers.展开更多
The increase in the utilization of infrared heat detection technology in military applications necessitates research on composites with improved thermal transmission performance and microwave absorption capabilities.T...The increase in the utilization of infrared heat detection technology in military applications necessitates research on composites with improved thermal transmission performance and microwave absorption capabilities.This study satisfactorily fabricated a series of MoS_(2)/BN-xyz composites(which were characterized by the weight ratio of MoS_(2)to BN,denoted by xy:z)through chemical vapor depos-ition,which resulted in their improved thermal stability and thermal transmission performance.The results show that the remaining mass of MoS_(2)/BN-101 was as high as 69.25wt%at 800℃under air atmosphere,and a temperature difference of 31.7℃was maintained between the surface temperature and the heating source at a heating temperature of 200℃.Furthermore,MoS_(2)/BN-301 exhibited an im-pressive minimum reflection loss value of-32.21 dB at 4.0 mm and a wide effective attenuation bandwidth ranging from 9.32 to 18.00 GHz(8.68 GHz).Therefore,these simplified synthesized MoS_(2)/BN-xyz composites demonstrate great potential as highly efficient con-tenders for the enhancement of microwave absorption performance and thermal conductance.展开更多
The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the a...The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the amount of acid-impregnated slag dosed on the compressive strength and water resistance of LR-MOC.The results showed that the magnesium element in the boron mud could be maximally leached under the conditions of 1:1 concentration of hydrochloric acid at room temperature,liquid-solid ratio of 2.5 mL·g^(-1),and reaction time of 5 h,and the main products were amorphous SiO_(2) as well as a small amount of magnesium olivine which had not been completely reacted.The LR-MOC prepared using the acid-soaked mixture could reach a softening coefficient of 0.85 for 28 d of water immersion when the molar ratio of MgO/MgCl_(2) was 2.2,the amount of water added was 0 g,and the acid-soaked slag dosing was 40 wt%,which also led to an appreciable late-strength,with an increase of 19.4%in compressive strength at 28 d compared to that at 7 d.Unlike previous studies,LR-MOC prepared in this way has a final strength phase that is not the more easily hydrolysed 3-phase but the lath-like 5-phase.For this phenomenon,we analyzed the mechanism and found that,during the acid leaching process,a part of amorphous SiO_(2) dissolved in the acid leaching solution formed a silica sol,in which Mg^(2+)played a bridging role to make the silica sol more stable.With the addition and hydrolysis of MgO,the silica sol gel coagulation slows down,providing a capping layer to inhibit the hydrolysis of the 5-phase crystals and providing some strength after coagulation.The amorphous SiO_(2) in the other part of the acid-impregnated slag generated M-S-H gel with Mg^(2+)and OH-,which synergised with the dense structure composed of interlocking crystals to improve the water resistance of LR-MOC.展开更多
A metal-free,visible-light-induced strategy has been developed for the diborylation of gem-dibromoalkanes.This reaction enables the construction of structurally diverse alkyl gem-diboronates at room temperature via vi...A metal-free,visible-light-induced strategy has been developed for the diborylation of gem-dibromoalkanes.This reaction enables the construction of structurally diverse alkyl gem-diboronates at room temperature via visible-light-induced C—Br bond activation using B2cat2 as the boron source.Through a tandem in-situ dibromination/diborylation process,a onepot transformation from aldehydes to alkyl gem-diboronates has been achieved.Additionally,sunlight irradiation has been demonstrated as a viable alternative for inducing this reaction,enabling gram-scale synthesis with practical applicability.展开更多
The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance dis-parity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction(ORR).In this wor...The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance dis-parity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction(ORR).In this work,we strategi-cally engineer the active site structure of Co-N-C via B substitution,which is accomplished by the pyrolysis of ammonium borate.During this process,the in-situ generated NH_(3)gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure.The well-designed CoB_(1)N_(3)active site endows Co with higher charge density and stronger adsorption energy toward oxygen species,potentially accelerating ORR kinetics.As expected,the resulting Co-B/N-C catalyst exhibited superior ORR performance over Co-N-C counterpart,with 40 mV,and fivefold en-hancement in half-wave potential and turnover frequency(TOF).More importantly,the excellent ORR performance could be translated into membrane electrode assembly(MEA)in a fuel cell test,delivering an impressive peak power density of 824 mW·cm^(-2),which is currently the best among Co-based catalysts under the same conditions.This work not only demon-strates an effective method for designing advanced catalysts,but also affords a highly promising non-precious metal ORR electrocatalyst for fuel cell applications.展开更多
Organoboron compounds have become important intermediates for the construction of new compounds in synthetic chemistry and pharmaceutical chemistry,and it has been found that pinacol biborate(B_(2)pin_(2))as the boron...Organoboron compounds have become important intermediates for the construction of new compounds in synthetic chemistry and pharmaceutical chemistry,and it has been found that pinacol biborate(B_(2)pin_(2))as the boron source and Cu^(Ⅱ) organophosphorus complex(L)as the catalyst can effectively realize the hydrogen-reduced borylation products and dehydrohydrated borylation products of aryl olefins.The reaction regioselectivity involvingβ-C positions of aryl olefins can be controlled by regulating the ligand and additive types.The formation mechanism of the product is conducted at LCu^(Ⅰ)Bpin formed from Cu^(Ⅱ),L and B_(2)pin_(2).Subsequently the substrate aryl olefins undergo addition reaction to form the active intermediate PhCH(LCu^(Ⅰ))CH_(2)Bpin.Followed by the metathesis of the active intermediate with water to form hydrogen reduction products,the same active intermediate can be oxidized with 2,2,6,6-tetramethylpiperidoxyl(TEMPO)to form trans dehydrogenation products.展开更多
Silica-based ramming mixes are widely used as lining materials in coreless induction furnaces,which serve as the main equipment for iron and steel in foundry industry.The service life of linings made from silica-based...Silica-based ramming mixes are widely used as lining materials in coreless induction furnaces,which serve as the main equipment for iron and steel in foundry industry.The service life of linings made from silica-based ramming mixes depends on the properties of quartzite raw materials.In this paper,quartzites from three regions were selected as raw materials,with boron oxide and boron phosphate as sintering aids.By comparing and testing performance such as the phase composition,permanent linear change,bulk density,apparent porosity,and slag resistance,the effects of raw material characteristics and sintering aids on the performance of the silica-based ramming mixes were investigated.The results showed that boron oxidecontaining ramming mixes prepared from quartzite with a fast phase transition showed lower strength and greater expansion as well as lower slag penetration index.For boron phosphate as a sintering aid,ramming mixes made from quartzites with medium and slow phase transition rates had an approaching slag penetration index comparable to those containing boron oxide,although their strength was lower than the latter.According to the melting requirements of stainless steel,boron phosphate can replace boron oxide as a sintering aid for silica-based ramming mixes.Regarding practical applications for linings of coreless induction furnaces,the selection of quartzite as the raw material for silica-based ramming mixes shall be comprehensively considered from multiple aspects.展开更多
基金This study was supported by the Interdisciplinary Program of Shanghai Jiao Tong University(ZH2018ZDA18)We are grateful for the support of ECNU Multifunctional Platform for Innovation(011),and the Flow Cytometry Core Facility at ECNU.
文摘The treatment of malignant bone tumors by chemotherapeutics often receives poor therapeutic response due to the specific physiological bone environment,and thus calls for the development of new therapeutic options.Here,we reported a bone-targeted protein nanomedicine for this purpose.Saporin,a toxin protein,was co-assembled with a boronated polymer for intracellular protein delivery,and the formed nanoparticles were further coated with an anionic polymer poly(aspartic acid)to shield the positive charges on nanoparticles and provide the bone targeting function.The prepared ternary complex nanoparticles showed high bone accumulation both in vitro and in vivo,and could reverse the surface charge property from negative to positive after locating at tumor site triggered by tumor extracellular acidity.The boronated polymer in the de-shielded nanoparticles further promote intracellular delivery of saporin into tumor cells,exerting the anticancer activity of saporin by inactivation of ribosomes.As a result,the bone-targeted and saporin-loaded nanomedicine could kill cancer cells at a low saporin dose,and efficiently prevented the progression of osteosarcoma xenograft tumors and bone metastatic breast cancer in vivo.This study provides a facile and promising strategy to develop protein-based nanomedicines for the treatment of malignant bone tumors.
基金funded by the National Natural Science Foundation of China(Grant No.U21B2086)。
文摘This study investigates the performance boundaries of ramjet and scramjet engines fueled by boronbased propellant through full-scale engine modeling and three-dimensional computational fluid dynamics simulations.Results show that the performance boundary between ramjets and scramjets occurs near Mach 7.Specifically,at Mach 6,the ramjet exhibits a 1290 m/s higher specific impulse than the scramjet;however,at Mach 7,their performance becomes comparable.The ramjet's higher static temperature promotes boron particle vaporization and B_(2)O_(2) dissociation,limiting the total temperature increase,unlike in scramjets.The boron vapor mass fraction significantly impacts this temperature difference,with ramjets exhibiting values 8.5 and 3.9 times higher than scramjets at Mach 6 and Mach 7,respectively.Despite lower total temperatures,ramjets achieve more efficient boron combustion due to the combined effects of higher pressures and longer particle residence times.These findings offer valuable insights for engine designers in selecting ramjet or scramjet configurations for boron-fueled propulsion systems.
基金funded by the National Natural Science Foundation of China,Grant No.22405208。
文摘Boron has attracted increasing attention in the field of high-energy explosives and propellants due to its high volume calorific value and mass calorific value.However,the complicated combustion process and low combustion efficiency hinder its wide application.To tackle this challenge,bioinspired polydopamine(PDA)interface reinforced boron-Viton composites,with high structure stability and excellent energy releasing efficiency,are designed and prepared,combining the interface regulation of PDA biomimetic materials and combustion promotion of fluoropolymers.Firstly,the stronger adsorption energy of PDA with boron compared to Viton is demonstrated by molecular dynamics simulations.Next,B@PDA@Viton is prepared by the combination of in-situ dopamine polymerization and solvent/nonsolvent method,and the double-layer core-shell structure is confirmed by XPS,FTIR,and TEM characterizations.TG-DSC analysis shows that B@PDA@Viton possesses superior thermal properties,with a 55.48%increase in oxidation heat compared to raw B.Furthermore,ignition and combustion performance tests indicate that B@PDA@Viton reduces ignition delay by 57.56%and increases heat of combustion by 68.63%relative to raw B.These findings elucidate the ignition and combustion mechanisms of B@PDA@Viton.This work not only developed high-performance boron-based composite fuels but also provided insights into the development of boron-based fuels.
基金supported by the National Natural Science Foundation of China(No.22278156)the Guangdong Special Support Program Project(No.2021JC060580)+1 种基金the Young Elite Scientists Sponsorship Program by CAST-Doctoral Student Special Plan,the China Scholarship Council Program(No.202406150148)the Natural Science Foundation of Guangdong Province(No.2023A1515011186).
文摘Peroxymonosulfate(PMS)-based advanced oxidation processes(AOPs)are an effective way to remove emerging contaminants(ECs)from water.The catalytic process involving PMS is hindered by the suboptimal electron trans-fer efficiency of current catalysts,the further application of AOPs technology is limited.Here,it is proposed that the interfacial electric field can be controlled by bor(B)-doped FeNC catalysts,which shows significant advantages in the efficient generation,release and participation of reactive oxygen species(ROS)in the reaction.The super exchange interaction between Fe sites and N and B sites is realized through the directional transfer of electrons in the interfacial electric field,which ensures the high efficiency and stability of the PMS catalytic process.B doping increases the d orbitals distribution at Fermi level,which facilitates enhanced electron transition activity,thereby promoting the effective generation of (1)^O_(2).At the same time,orbital hybridization causes the center of the d band to move to a lower energy level,which not only contributes to the desorption process of (1)^O_(2),but also accelerates its release.In addition,B-doping also improved the adsorption capacity of organic pollutants and shortened the migration distance of ROS,thereby significantly improving the degradation efficiency of ECs.The B-doping strategy outlined offers a novel approach to the development of FeNC catalysts,it lays a theoretical foundation and offers technical insights for the integration of PMS/AOPs technology in the ECs management.
基金Project supported by the National Natural Science Foundation of China(Grant No.12274178)。
文摘The electronic states of the smallest boron cluster B_(3)with excitation energies up to 5 e V are systematically investigated.Geometries and spectroscopic constants for the low-lying electronic states were calculated using the multireference configuration interaction method with Davidson correction(MRCI+Q).The nondegenerate 1^(2)B_(2)and 2^(2)A_(1)states are arising from the degenerate~2E~′state in D_(3h)symmetry,this is also the case for 2^(2)B_(2)and 3~2A_(1).Furthermore,vertical excitation energies,oscillator strengths,main configurations,and transitions of the excited state of B_(3)were determined.Notably,the theoretically predicted wavelengths for the X^(2)A_(1)→2^(2)A_(1)and X^(2)A_(1)→2^(2)B_(2)electronic transitions(728 nm and 457 nm,respectively)exhibit excellent agreements with experimental absorption bands observed at 736 nm and 458 nm.These theoretical findings provide critical insights into the electronic structure and geometric configuration of the B_(3)cluster.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
基金supported by the Department of Biotechnology,Government of India(DBT),TWAS,and the Ministry of Innovative Development of Uzbekistan。
文摘The combined effects of macronutrients(Nitrogen,Phosphorus,and Potassium-N,P,K)and micronutrient fertilization on turmeric yield,soil enzymatic activity,microbial biomass,and nutrient dynamics remains poorly understood,despite their significance for sustainable soil fertility management and optimizing crop productivity across diverse agroecosystems.To investigate,a net house experiment on sandy loam Haplic Chernozem was conducted to 03 fertilizer regimes,viz.N_(75)P_(50)K_(50)kg ha^(−1)(T-2),N_(12)5P_(100)K_(100)kg ha^(−1)(T-3),and N_(100)P_(75)K_(75)+B_(3)Zn_(6)Fe_(6)kg ha^(−1)(T-4).Furthermore,the influence of these treatments was systematically assessed on soil nutrient status(N,P,K),enzymatic activities(alkaline phosphomonoesterase,dehydrogenase,fluorescein diacetate hydrolysis),microbial biomass carbon(MBC)and soil organic carbon(SOC).Balanced fertilization significantly turmeric productivity and soil health.All three fertilizer treatments showed a clear yield increase compared to the unfertilized control.Compared to the control,N_(75)P_(50)K_(50)kg/ha T-2 increased rhizome number and biomass per plant by 44.7%and 16.3%,respectively,while N_(100)P_(75)K_(75)+B_(3)Zn_(6)Fe_(6)kg/ha T-4 further enhanced them by 86.6%and 27.7%.T-3 produced the most significant yield response by increasing the rhizome biomass by 38.0%and rhizome number per plant by 100%compared to the control.The nutrient availability was also substantially improved.T-2 enhanced the soil nitrogen contents by 83.3%with maximum N levels observed in T-3&T-4.Phosphorus increased by 61.5%in T-3 and 37.3%in T-4,while potassium was enhanced by 12.9%in T-3 relative to the control,respectively.Enzymatic activities were markedly enhanced as T-3 was recorded to improve alkaline phosphomonoesterase(APA),dehydrogenase(DHA)and fluorescein diacetate hydrolysis(FDA)by 50.6%,37.4%,and 43.4%,where T-4 increased by 32.2%,30.9%,and 35.9%,respectively compared to control.MBC and SOC also rose significantly,with SOC increased by 13.8%(T-2),41.6%(T-3),and 47.2%(T-3)relative to control.The result of this study demonstrates that the integrated macroµnutrient fertilization,particularly T-37 T-4 treatments,sustainably enhanced turmeric yield,soil nutrient availability,enzyme activity,microbial biomass,and organic carbon.These findings highlight the critical role of balanced nutrient management in sustaining soil fertility and crop productivity across agroecosystems.
基金support for this work by Hebei Education Department(No.JZX2024004)Central Guidance on Local Science and Technology Development Fund of Hebei Province(No.236Z1404G)+3 种基金the National Natural Science Foundation of China(Nos.22301060 and 21272053)China Postdoctoral Science Foundation(No.2023M730914)the Natural Science Foundation of Hebei Province(Biopharmaceutical Joint Fund No.B2022206008)Project of Science and Technology Department of Hebei Province(No.22567622H)。
文摘Heterogeneous metal-catalyzed chemical conversions with a recyclable catalyst are very ideal and challenging for sustainable organic synthesis.A new bipyridyl-Mo(IV)-carbon nitride(CN-K/Mo-Bpy)was prepared by supporting molybdenum complex on C_(3)N_(4)-K and characterized by FT-IR,XRD,SEM,XPS and ICP-OES.Heterogeneous CN–Mo-Bpy catalyst can be applied to the direct amination of nitroarenes and arylboronic acid,thus constructing various valuable diarylamines in high to excellent yields with a wide substrate scope and good functional group tolerance.It is worth noting that this heterogeneous catalyst has high chemical stability and can be recycled for at least five times without reducing its activity.
基金support from the National Natural Science Foundation of China(22268025,52473083,and 22475176)Key Research and Development Program of Yunnan Province(202403AP140036)+2 种基金Natural Science Basic Research Program of Shaanxi(2024JC-TBZC-04)Applied Basic Research Program of Yunnan Province(202201AT070115 and 202201BE070001-031)supported by the Innovation Capability Support Program of Shaanxi(2024RS-CXTD-57).
文摘The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices.Hence,a composite with three-dimensional network(Ho/U-BNNS/WPU)is developed by simultaneously incorporating magnetically modified boron nitride nanosheets(M@BNNS)and non-magnetic organo-grafted BNNS(U-BNNS)into waterborne polyurethane(WPU)to synchronous molding under a horizontal magnetic field.The results indicate that the continuous in-plane pathways formed by M@BNNS aligned along the magnetic field direction,combined with the bridging structure established by U-BNNS,enable Ho/U-BNNS/WPU to exhibit exceptional in-plane(λ//)and through-plane thermal conductivities(λ_(⊥)).In particular,with the addition of 30 wt%M@BNNS and 5 wt%U-BNNS,theλ//andλ_(⊥)of composites reach 11.47 and 2.88 W m^(-1) K^(-1),respectively,which representing a 194.2%improvement inλ_(⊥)compared to the composites with a single orientation of M@BNNS.Meanwhile,Ho/U-BNNS/WPU exhibits distinguished thermal management capabilities as thermal interface materials for LED and chips.The composites also demonstrate excellent flame retardancy,with a peak heat release and total heat release reduced by 58.9%and 36.9%,respectively,compared to WPU.Thus,this work offers new insights into the thermally conductive structural design and efficient flame-retardant systems of polymer composites,presenting broad application potential in electronic packaging fields.
基金National Key Research and Development Program of China (2022YFE0206300)National Natural Science Foundation of China (U21A2081,22075074, 22209047)+3 种基金Guangdong Basic and Applied Basic Research Foundation (2024A1515011620)Hunan Provincial Natural Science Foundation of China (2024JJ5068)Foundation of Yuelushan Center for Industrial Innovation (2023YCII0119)Student Innovation Training Program (S202410532594,S202410532357)。
文摘Hard carbon (HC) has been considered as promising anode material for sodium-ion batteries (SIBs).The optimization of hard carbon’s microstructure and solid electrolyte interface (SEI) property are demonstrated effective in enhancing the Na+storage capability,however,a one-step regulation strategy to achieve simultaneous multi-scale structures optimization is highly desirable.Herein,we have systematically investigated the effects of boron doping on hard carbon’s microstructure and interface chemistry.A variety of structure characterizations show that appropriate amount of boron doping can increase the size of closed pores via rearrangement of carbon layers with improved graphitization degree,which provides more Na+storage sites.In-situ Fourier transform infrared spectroscopy/electrochemical impedance spectroscopy (FTIR/EIS) and X-ray photoelectron spectroscopy (XPS) analysis demonstrate the presence of more BC3and less B–C–O structures that result in enhanced ion diffusion kinetics and the formation of inorganic rich and robust SEI,which leads to facilitated charge transfer and excellent rate performance.As a result,the hard carbon anode with optimized boron doping content exhibits enhanced rate and cycling performance.In general,this work unravels the critical role of boron doping in optimizing the pore structure,interface chemistry and diffusion kinetics of hard carbon,which enables rational design of sodium-ion battery anode with enhanced Na+storage performance.
基金supported by the Fundamental Research Funds for Central Universities(No.30922010811).
文摘It is important to understand the evolution of the matter on the polymer membrane surface.The in situ and real-time monitoring of the membrane surface will not only favor the investigation of selective layer formation but can also track the fouling process during operation.Herein,an aggregation-induced emission(AIE)-active polymer membrane was prepared by the interfacial polymerization of a cyclodextrin-based glycocluster(CD@Glucose)and a tetraphenylethylene derivative modified with boronic acid groups(TPEDB)on the surface of a polyacrylonitrile(PAN)ultrafiltration membrane.This interfacial polymerization method can be stacked layer-by-layer to regulate the hydrophilicity and pore structure of the membrane.With the increase in the number of polymer layers,the separation and antifouling properties of the membrane gradually improved.Owing to the AIE property of the crosslinking agent TPEDB,the occurrence of interfacial polymerization and the degree of fouling during membrane operation can be monitored by the fluorescence distribution and intensity.With the aggravation of membrane fouling,the fluorescence decreased gradually,but recovered after cleaning.Therefore,this AIE effect can be used for real-time monitoring of interfacial polymerization as well as membrane fouling.
基金supported by the National Natural Science Foundation of China(Nos.52275395,51935014,and 82072084)the Science and Technology Innovation Program of Hunan Province(No.2023RC3046)+4 种基金the Young Elite Scientists Sponsorship Program byCAST(No.2020QNRC002)the NationalKeyResearchand Development Program of China(No.2023YFB4605800)the Central South University Innovation-Driven Research Programme(No.2023CXQD023)the Jiangxi Provincial Natural Science Foundation of China(No.20224ACB204013)the Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance,Central South University.
文摘Magnetostrictive Fe-Ga alloys have captivated substantial focus in biomedical applications because of their exceptional transition efficiency and favorable cytocompatibility.Nevertheless,Fe-Ga alloys always exhibit frustrating magnetostriction coefficients when presented in bulk dimensions.It is well-established that the magnetostrictive performance of Fe-Ga alloys is intimately linked to their phase and crystal structures.In this study,various concentrations of boron(B)were doped into Fe_(81)Ga_(19) alloys via the laser-beam powder bed fusion(LPBF)technique to tailor the crystal and phase structures,thereby improving the magnetostrictive performance.The results revealed the capacity for quick solidification of the LPBF process in expediting the solid solution of B element,which increased both lattice distortion and dislocations within the Fe-Ga matrix.These factors contributed to an elevation in the density of the modified-D0_(3) phase structure.Moreover,the prepared Fe-Ga-B alloys also exhibited a(001)preferred grain orientation caused by the high thermal gradients during the LPBF process.As a result,a maximum magnetostriction coefficient of 105 ppm was achieved in the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy.In alternating magnetic fields,all the LPBF-prepared alloys showed good dynamic magnetostriction response without visible hysteresis,while the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy presented a notable enhancement of~30%in magnetostriction coefficient when compared with the Fe_(81)Ga_(19) alloy.Moreover.the(Fe_(81)Ga_(19))_(98.5)B_(1.5) alloy exhibited favorable biocompatibility and osteogenesis,as confirmed by increased alkaline phosphatase(ALP)activity and the formation of mineralized nodules.These findings suggest that the B-doped Fe-Ga alloys combined with the LPBF technique hold promise for the development of bulk magnetostrictive alloys that are applicable for bone repair applications.
基金supported by the National Natural Science Foundation of China(No.51972162)the Fundamental Research Funds for the Central Universities(No.2024300440).
文摘Lowering the synthesis temperature of boron nitride nanotubes(BNNTs)is crucial for their development.The primary reason for adopting a high temperature is to enable the effective activation of highmelting-point solid boron.In this study,we developed a novel approach for efficiently activating boron by introducing alkali metal compounds into the conventional MgO–B system.This approach can be adopted to form various low-melting-point AM–Mg–B–O growth systems.These growth systems have improved catalytic capability and reactivity even under low-temperature conditions,facilitating the synthesis of BNNTs at temperatures as low as 850℃.In addition,molecular dynamics simulations based on density functional theory theoretically demonstrate that the systems maintain a liquid state at low temperatures and interact with N atoms to form BN chains.These findings offer novel insights into the design of boron activation and are expected to facilitate research on the low-temperature synthesis of BNNTs.
基金supported by the Natural Science Foundation of Jiangsu Province(No.BZ2022007)the National Natural Science Foundation of China(No.92261202)+1 种基金the Ministry of Science and Technology of the People’s Republic of China(No.2021YFE0114800)the Ministry of Science and Higher Education of the Russian Federation(No.075-15-2021-1027).
文摘Thermally activated delayed fluorescence(TADF)materials driven by a through-space charge transfer(TSCT)mechanism have garnered wide interest.However,access of TSCT-TADF molecules with longwavelength emission remains a formidable challenge.In this study,we introduce a novel V-type DA-D-A’emitter,Trz-mCzCbCz,by using a carborane scaffold.This design strategically incorporates carbazole(Cz)and 2,4,6-triphenyl-1,3,5-triazine(Trz)as donor and acceptor moieties,respectively.Theoretical calculations alongside experimental validations affirm the typical TSCT-TADF characteristics of this luminogen.Owing to the unique structural and electronic attributes of carboranes,Trz-mCzCbCz exhibits an orange-red emission,markedly diverging from the traditional blue-to-green emissions observed in classical Cz and Trz-based TADF molecules.Moreover,bright emission in aggregates was observed for Trz-mCzCbCz with absolute photoluminescence quantum yield(PLQY)of up to 88.8%.As such,we have successfully fabricated five organic light-emitting diodes(OLEDs)by utilizing Trz-mCzCbCz as the emitting layer.It is important to note that both the reverse intersystem crossing process and the TADF properties are profoundly influenced by host materials.The fabricated OLED devices reached a maximum external quantum efficiency(EQE)of 12.7%,with an emission peak at 592 nm.This represents the highest recorded efficiency for TSCT-TADF OLEDs employing carborane derivatives as emitting layers.
基金supported by the Science and Technology Department of Qinghai Province,China(No.2022-ZJ-932Q).
文摘The increase in the utilization of infrared heat detection technology in military applications necessitates research on composites with improved thermal transmission performance and microwave absorption capabilities.This study satisfactorily fabricated a series of MoS_(2)/BN-xyz composites(which were characterized by the weight ratio of MoS_(2)to BN,denoted by xy:z)through chemical vapor depos-ition,which resulted in their improved thermal stability and thermal transmission performance.The results show that the remaining mass of MoS_(2)/BN-101 was as high as 69.25wt%at 800℃under air atmosphere,and a temperature difference of 31.7℃was maintained between the surface temperature and the heating source at a heating temperature of 200℃.Furthermore,MoS_(2)/BN-301 exhibited an im-pressive minimum reflection loss value of-32.21 dB at 4.0 mm and a wide effective attenuation bandwidth ranging from 9.32 to 18.00 GHz(8.68 GHz).Therefore,these simplified synthesized MoS_(2)/BN-xyz composites demonstrate great potential as highly efficient con-tenders for the enhancement of microwave absorption performance and thermal conductance.
基金Funded by Provincial Basic Research Projects(No.LJKMZ20220947)。
文摘The effects of liquid-solid ratio and reaction time on the leaching rate of magnesium at room temperature were investigated,as well as the effects of the molar ratio of MgO/MgCl_(2),the amount of water added,and the amount of acid-impregnated slag dosed on the compressive strength and water resistance of LR-MOC.The results showed that the magnesium element in the boron mud could be maximally leached under the conditions of 1:1 concentration of hydrochloric acid at room temperature,liquid-solid ratio of 2.5 mL·g^(-1),and reaction time of 5 h,and the main products were amorphous SiO_(2) as well as a small amount of magnesium olivine which had not been completely reacted.The LR-MOC prepared using the acid-soaked mixture could reach a softening coefficient of 0.85 for 28 d of water immersion when the molar ratio of MgO/MgCl_(2) was 2.2,the amount of water added was 0 g,and the acid-soaked slag dosing was 40 wt%,which also led to an appreciable late-strength,with an increase of 19.4%in compressive strength at 28 d compared to that at 7 d.Unlike previous studies,LR-MOC prepared in this way has a final strength phase that is not the more easily hydrolysed 3-phase but the lath-like 5-phase.For this phenomenon,we analyzed the mechanism and found that,during the acid leaching process,a part of amorphous SiO_(2) dissolved in the acid leaching solution formed a silica sol,in which Mg^(2+)played a bridging role to make the silica sol more stable.With the addition and hydrolysis of MgO,the silica sol gel coagulation slows down,providing a capping layer to inhibit the hydrolysis of the 5-phase crystals and providing some strength after coagulation.The amorphous SiO_(2) in the other part of the acid-impregnated slag generated M-S-H gel with Mg^(2+)and OH-,which synergised with the dense structure composed of interlocking crystals to improve the water resistance of LR-MOC.
文摘A metal-free,visible-light-induced strategy has been developed for the diborylation of gem-dibromoalkanes.This reaction enables the construction of structurally diverse alkyl gem-diboronates at room temperature via visible-light-induced C—Br bond activation using B2cat2 as the boron source.Through a tandem in-situ dibromination/diborylation process,a onepot transformation from aldehydes to alkyl gem-diboronates has been achieved.Additionally,sunlight irradiation has been demonstrated as a viable alternative for inducing this reaction,enabling gram-scale synthesis with practical applicability.
基金the National Key Research and Development Program of China(2022YFB4004100)National Natural Science Foundation of China(22272161,22179126)+1 种基金the Jilin Province Science and Technology Development Program(YDZJ202202CXJD011,20240101019JC)Jilin Province major science and technology project(222648GX0105103875)for financial supports.
文摘The weak adsorption energy of oxygen-containing intermediates on Co center leads to a considerable performance dis-parity between Co-N-C and costly Pt benchmark in catalyzing oxygen reduction reaction(ORR).In this work,we strategi-cally engineer the active site structure of Co-N-C via B substitution,which is accomplished by the pyrolysis of ammonium borate.During this process,the in-situ generated NH_(3)gas plays a critical role in creating surface defects and boron atoms substituting nitrogen atoms in the carbon structure.The well-designed CoB_(1)N_(3)active site endows Co with higher charge density and stronger adsorption energy toward oxygen species,potentially accelerating ORR kinetics.As expected,the resulting Co-B/N-C catalyst exhibited superior ORR performance over Co-N-C counterpart,with 40 mV,and fivefold en-hancement in half-wave potential and turnover frequency(TOF).More importantly,the excellent ORR performance could be translated into membrane electrode assembly(MEA)in a fuel cell test,delivering an impressive peak power density of 824 mW·cm^(-2),which is currently the best among Co-based catalysts under the same conditions.This work not only demon-strates an effective method for designing advanced catalysts,but also affords a highly promising non-precious metal ORR electrocatalyst for fuel cell applications.
文摘Organoboron compounds have become important intermediates for the construction of new compounds in synthetic chemistry and pharmaceutical chemistry,and it has been found that pinacol biborate(B_(2)pin_(2))as the boron source and Cu^(Ⅱ) organophosphorus complex(L)as the catalyst can effectively realize the hydrogen-reduced borylation products and dehydrohydrated borylation products of aryl olefins.The reaction regioselectivity involvingβ-C positions of aryl olefins can be controlled by regulating the ligand and additive types.The formation mechanism of the product is conducted at LCu^(Ⅰ)Bpin formed from Cu^(Ⅱ),L and B_(2)pin_(2).Subsequently the substrate aryl olefins undergo addition reaction to form the active intermediate PhCH(LCu^(Ⅰ))CH_(2)Bpin.Followed by the metathesis of the active intermediate with water to form hydrogen reduction products,the same active intermediate can be oxidized with 2,2,6,6-tetramethylpiperidoxyl(TEMPO)to form trans dehydrogenation products.
基金grateful to Hubei Province Science and Technology Innovation Talent Plan,and Science and Technology Service Talent Special Project(2023DJC124)for the support on this work.
文摘Silica-based ramming mixes are widely used as lining materials in coreless induction furnaces,which serve as the main equipment for iron and steel in foundry industry.The service life of linings made from silica-based ramming mixes depends on the properties of quartzite raw materials.In this paper,quartzites from three regions were selected as raw materials,with boron oxide and boron phosphate as sintering aids.By comparing and testing performance such as the phase composition,permanent linear change,bulk density,apparent porosity,and slag resistance,the effects of raw material characteristics and sintering aids on the performance of the silica-based ramming mixes were investigated.The results showed that boron oxidecontaining ramming mixes prepared from quartzite with a fast phase transition showed lower strength and greater expansion as well as lower slag penetration index.For boron phosphate as a sintering aid,ramming mixes made from quartzites with medium and slow phase transition rates had an approaching slag penetration index comparable to those containing boron oxide,although their strength was lower than the latter.According to the melting requirements of stainless steel,boron phosphate can replace boron oxide as a sintering aid for silica-based ramming mixes.Regarding practical applications for linings of coreless induction furnaces,the selection of quartzite as the raw material for silica-based ramming mixes shall be comprehensively considered from multiple aspects.
