The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infan...The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.展开更多
The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of...The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of Three-Dimensional(3D)-printed Polycaprolactone(PCL)scaffolds with varying proportions of Nanohydroxyapatite(NHA)and Nanoclay(NC),and their physiochemical and biological properties were assessed.The mechanical properties of PCL are satisfactory;however,its hydrophobic nature and long-term degradation hinder its use in scaffold fabrication.NHA and NC have been employed to improve the hydrophilic characteristics,mechanical strength,adhesive properties,biocompatibility,biodegradability,and osteoconductive behavior of PCL.The morphology results demonstrated 3D-printed structures with interconnected rectangular macropores and proper nanoparticle distribution.The sample containing 70 wt%NC showed the highest porosity(65.98±2.54%),leading to an increased degradation rate.The compressive strength ranged from 10.65±1.90 to 84.93±9.93 MPa,which is directly proportional to the compressive strength of cancellous bone(2–12 MPa).The wettability,water uptake,and biodegradability of PCL scaffolds considerably improved as the amount of NC increased.The results of the cellular assays exhibited increased proliferation,viability,and adhesion of MG-63 cells due to the addition of NHA and NC to the scaffolds.Finally,according to the in vitro results,it can be concluded that 3D-printed samples with higher amounts of NC can be regarded as a suitable scaffold for expediting the regeneration process of bone defects.展开更多
Nonunion represents a crucial challenge in orthopedic medicine,demanding innovative solutions beyond the scope of traditional bone grafting methods.Among the various strategies available,magnesium(Mg)implants have bee...Nonunion represents a crucial challenge in orthopedic medicine,demanding innovative solutions beyond the scope of traditional bone grafting methods.Among the various strategies available,magnesium(Mg)implants have been recognized for their biocompatibility and biodegradability.However,their susceptibility to rapid corrosion and degradation has garnered notable research interest in bone tissue engineering(BTE),particularly in the development of Mg-incorporated biocomposite scaffolds.These scaffolds gradually release Mg2+,which enhances immunomodulation,osteogenesis,and angiogenesis,thus facilitating effective bone regeneration.This review presents myriad fabrication techniques used to create Mg-incorporated biocomposite scaffolds,including electrospinning,three-dimensional printing,and sol-gel synthesis.Despite these advancements,the application of Mg-incorporated biocomposite scaffolds faces challenges such as controlling the degradation rate of Mg and ensuring mechanical stability.These limitations highlight the necessity for ongoing research aimed at refining fabrication techniques to better regulate the physicochemical and osteogenic properties of scaffolds.This review provides insights into the potential of Mg-incorporated biocomposite scaffolds for BTE and the challenges that need to be addressed for their successful translation into clinical applications.展开更多
Three-dimensional honeycomb-structured magnesium （Mg） scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactiveβ...Three-dimensional honeycomb-structured magnesium （Mg） scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactiveβ- tricalcium phosphate （β-TCP） coatings were prepared on and the biodegradation mechanism was simply evaluated the porous Mg to further improve its biocompatibility, in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells （UMR106） were well adhered and proliferated on the surface of the β- TCP coated porous Mg, which indicates that theβ-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.展开更多
A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n cop...A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide（ DLLA） and glycolide（ GA ） with Aspartic acid （ Asp ）-Polyethylene glycol（PEG） alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-（ PEG- Asp）n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid （naSBF）. Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- （ PEG-Asp ）n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- （ PEG-Asp ） n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-（ PEG- Asp ）n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.展开更多
The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In v...The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In vitro, DBM and bone marrow stromal cell (BMSC) from rabbits were co-cultured for 3-7 days and subjected to HE staining, and a series of histomorphological observations were performed under phase-contrast microscopy and scanning electron microscopy (SEM). In vivo the mixture of DBM/BMSC co-cultured for 3 days was planted into one side of muscules sacrospinalis of rabbits, and the DBM without BMSC was planted into other side as control. Specimens were collected at postoperative week 1, 2 and 4, and subjected to HE staining, and observed under SEM. The results showed during culture in vitro, the BMSCs adherent to the wall of DBM grew, proliferated and had secretive activity. The in vivo experiment revealed that BMSCs and undifferentiated mesenchymal cells in the perivascular region invaded gradually and proliferated together in DBM/BMSC group, and colony-forming units of chondrocytes were found. Osteoblasts, trabecular bone and medullary cavity appeared. The inflammatory reaction around muscles almost disappeared at the second weeks. In pure DBM group, the similar changes appeared from the surface of the DBM to center, and the volume of total regenerate bones was less than the DBM/BMSC group at the same time. The results indicated that the mixture of DBM and BMSC had good biocompatibility and ectopic induced osteogenic activity.展开更多
Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate （CAP） biomaterials/scaffolds are of special interest as they share chemical/crystallographic simila...Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate （CAP） biomaterials/scaffolds are of special interest as they share chemical/crystallographic similarities to inorganic components of bone. Three applications of nano-CaP are discussed in this review： nanostructured calcium phosphate cement （CPC）; nano-CaP composites; and nano-CaP coatings. The interactions between stem cells and nano-CaP are highlighted, including cell attachment, orientation/ morphology, differentiation and in vivo bone regeneration. Several trends can be seen： （i） nano-CaP biomaterials support stem cell attachment/proliferation and induce osteogenic differentiation, in some cases even without osteogenic supplements; （ii） the influence of nano-CaP surface patterns on cell alignment is not prominent due to non-uniform distribution of nano-crystals; （iii） nano-CaP can achieve better bone regeneration than conventional CaP biomaterials; （iv） combining stem cells with nano-CaP accelerates bone regeneration, the effect of which can be further enhanced by growth factors; and （v） cell microencapsulation in nano-CaP scaffolds is promising for bone tissue engineering. These understandings would help researchers to further uncover the underlying mechanisms and interactions in nano-CaP stem cell constructs in vitro and in vivo, tailor nano-CaP composite construct design and stem cell type selection to enhance cell function and bone regeneration, and translate laboratory findings to clinical treatments.展开更多
Interconnectivity is the key characteristic of bone tissue engineering scaffold modulating cell migration,blood vessels invasion and transport of nutrient and waste.However,efforts and understanding of the interconnec...Interconnectivity is the key characteristic of bone tissue engineering scaffold modulating cell migration,blood vessels invasion and transport of nutrient and waste.However,efforts and understanding of the interconnectivity of porous Mg is limited due to the diverse architectures of pore struts and pore size distribution of Mg scaffold systems.In this work,biomimetic hierarchical porous Mg scaffolds with tailored interconnectivity as well as pore size distribution were prepared by template replication of infiltration casting.Mg scaffold with better interconnectivity showed lower mechanical strength.Enlarging interconnected pores would enhance the interconnectivity of the whole scaffold and reduce the change of ion concentration,pH value and osmolality of the degradation microenvironment due to the lower specific surface area.Nevertheless,the degradation rates of five tested Mg scaffolds were no different because of the same geometry of strut unit.Direct cell culture and evaluation of cell density at both sides of four typical Mg scaffolds indicated that cell migration through hierarchical porous Mg scaffolds could be enhanced by not only bigger interconnected pore size but also larger main pore size.In summary,design of interconnectivity in terms of pore size distribution could regulate mechanical strength,microenvironment in cell culture condition and cell migration potential,and beyond that it shows great potential for personalized therapy which could facilitate the regeneration process.展开更多
In this paper, preparation of nano-biphasic calcium phosphate （nBCP）, mechanical behavior and load-bearing of poly （lactide-co-glycolide） （PLGA） and PLGA/nBCP are presented. The nBCP with composition of 63/37 （...In this paper, preparation of nano-biphasic calcium phosphate （nBCP）, mechanical behavior and load-bearing of poly （lactide-co-glycolide） （PLGA） and PLGA/nBCP are presented. The nBCP with composition of 63/37 （w/w） HA/-TCP （hydroxyapatite/fl-tricalcium phosphate） was produced by heating of bovine bone at 700℃. Composite scaffolds were made by using PLGA matrix and 10-50 wt% nBCP powders as reinforcement material. All scaffolds were prepared by thermally induced solid-liquid phase separation （TIPS） at -60~C under 4 Pa （0.04 mbar） vacuum. The results of elastic modulus testing were adjusted with Ishai-Cohen and Narkis models for rigid polymeric matrix and compared to each other. PLGA/nBCP scaffolds with 30 wt% nBCP showed the highest value of yield strength among the scaffolds. In addition, it was found that by increasing the nBCP in scaffolds to 50 wt%, the modulus of elasticity was highly enhanced. However, the optimum value of yield strength was obtained at 30 wt% nBCP, and the agglomeration of reinforcing particles at higher percentages caused a reduction in yield strength. It is clear that the elastic modulus of matrix has the significant role in elastic modulus of scaffolds, as also the size of the filler particles in the matrix.展开更多
Lanthanum(La)has tremendous potential in the treatment and prevention of bone diseases especially osteoporosis and metabolic disorders.However,controlling its distribution and keeping the release of La^(3+)ions sustai...Lanthanum(La)has tremendous potential in the treatment and prevention of bone diseases especially osteoporosis and metabolic disorders.However,controlling its distribution and keeping the release of La^(3+)ions sustained and steady in the body is still a big challenge.In this study,we prepared La-OCP powders via co-precipitation method,and further prepared La-OCP/PLA porous scaffolds by 3 D printing.La^(3+)was successfully introduced into the OCP crystal structure and substituted Ca^(2+)at the Ca-5 and Ca-8 sites.In particular,some La^(3+)ions were deposited on the crystal surface in the form of nanoparticles.Both octacalcium phosphate(OCP,Ca_(8)H_(2)(PO_(4))_6·5 H_(2)O)crystals and nanoparticles played as the carriers for La^(3+)ions.The La-OCP/PLA scaffolds displayed obvious mineralization effects and sustained release of La^(3+).The scaffolds contained a uniform structure with rough micro surface topography which acted as a suitable pathway for BMSCs cells to adhere,grow and proliferation.At a certain La^(3+)concentration,the extracts from La-OCP/PLA scaffolds increased the expression of osteogenesis-related genes,thus promoting the osteogenic differentiation of BMSCs.Moreover,the extracts regulated the immune responses.The experiment in vivo proved that La-OCP/PLA porous scaffolds were safe and could enhance bone defect regeneration in vivo.These findings suggest that 3 D printed La-OCP/PLA porous scaffolds have promising potentials in bone tissue engineering.展开更多
Metal-organic frameworks(MOFs), a class of hybrid materials, consist of organic linkers and bridging metal ions or clusters. Their tunable pore sizes, large surface area, good biocompatibility, structural variability ...Metal-organic frameworks(MOFs), a class of hybrid materials, consist of organic linkers and bridging metal ions or clusters. Their tunable pore sizes, large surface area, good biocompatibility, structural variability in combination with materials and chemicals, and osteogenic effects provide potential approaches for bone tissue engineering and bone diseases. And there are more and more research on MOFs in the field of osteogenesis in recent years. This review presents an overall summary of the application in the bone tissue engineering and bone diseases of MOFs and their composites, starting with the synthesis of MOFs, which discusses the advantages and disadvantages of different syntheses. Then, the biological functions of MOFs are discussed, which are the basics of MOFs applied in the organism. Importantly,mechanisms and abundant applications of MOFs are detailed in the bone tissue engineering and bone diseases. Finally, some prospects of MOFs are discussed, for instance, exploring whether MOFs can be used to treat other bone diseases.展开更多
Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction.Autografts and allografts have been used in clinical application for some time,but they have disadvantage...Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction.Autografts and allografts have been used in clinical application for some time,but they have disadvantages.With the inherent drawback in the precision and reproducibility of conventional scaffold fabrication techniques,the results of bone surgery may not be ideal.This is despite the introduction of bone tissue engineering which provides a powerful approach for bone repair.Rapid prototyping technologies have emerged as an alternative and have been widely used in bone tissue engineering,enhancing bone tissue regeneration in terms of mechanical strength,pore geometry,and bioactive factors,and overcoming some of the disadvantages of conventional technologies.This review focuses on the basic principles and characteristics of various fabrication technologies,such as stereolithography,selective laser sintering,and fused deposition modeling,and reviews the application of rapid prototyping techniques to scaffolds for bone tissue engineering.In the near future,the use of scaffolds for bone tissue engineering prepared by rapid prototyping technology might be an effective therapeutic strategy for bone defects.展开更多
The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary cha...The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary challenges that must be addressed.For example,although bredigite(Br)has shown great potential for application in bone tissue engineering,it easily fails in replacement.In the present work,these challenges are addressed by reinforcing the Br matrix with nanosheets of graphene oxide(rGO)that have been reduced by bovine serum albumin(BSA)in order to enhance the mechanical properties and biological behavior.The reduction of graphene oxide by BSA improves the water stability of the nanosheets and provides an electrostatic interaction between theBSA-rGO nanosheets and theBr particles.The high thermal conductivity of theBSA-rGO nanosheets decreases the porosity of the Br by transferring heat to the core of the tablet.Furthermore,the addition of BSA-rGO nanosheets into the Br matrix enhances the adhesion of G-292 cells on the surface of the tablets.These findings suggest that the tablet consisting of BSA-rGO-reinforced Br has encouraging potential for application in bone tissue engineering.展开更多
Colloidal gels made of oppositely charged nanoparticles are a novel class of hydrogels and can exhibit pseudoplastic behavior which will enable them to mold easily into specific shapes.These moldable gels can be used ...Colloidal gels made of oppositely charged nanoparticles are a novel class of hydrogels and can exhibit pseudoplastic behavior which will enable them to mold easily into specific shapes.These moldable gels can be used as building blocks to self-assemble into integral scaffolds from bottom to up through electrostatic forces.However,they are too weak to maintain scaffold morphology just depending on interparticle interactions such as Van der Waals attraction and electrostatic forces especially for bone tissue engineering.In this study,oppositely charged gelatin nanoparticles were firstly prepared by two-step desolvation method,followed by the mixture with water to form colloid gels.To solve the problem of weak mechanical performance of colloid gels, gelatin macromolecules were introduced into the prepared gels to form blend gels.The blend gels can be easily processed into three-dimensional( 3D) porous scaffolds via motor assisted microsyringe( MAM)system,a nozzle-based rapid prototyping technology,under mild conditions.After fabrication the scaffolds were crosslinked by glutaraldehyde( GA,25% solution in water by weight),then the crosslinked gelatin macromolecules network could form to improve the mechanical properties of colloid gels.The average particle size and zeta potential of gelatin nanoparticles were measured by NanoZS instrument.The morphology and microstructures of scaffolds were characterized by macroscopic images.The mechanical properties of the scaffolds were studied by a universal material testing machine.展开更多
BACKGROUND Bone tissue engineering is an area of continued interest within orthopaedic surgery,as it promises to create implantable bone substitute materials that obviate the need for autologous bone graft.Recently,ox...BACKGROUND Bone tissue engineering is an area of continued interest within orthopaedic surgery,as it promises to create implantable bone substitute materials that obviate the need for autologous bone graft.Recently,oxysterols–oxygenated derivatives of cholesterol-have been proposed as a novel class of osteoinductive small molecules for bone tissue engineering.Here,we present the first systematic review of the in vivo evidence describing the potential therapeutic utility of oxysterols for bone tissue engineering.AIM To systematically review the available literature examining the effect of oxysterols on in vivo bone formation.METHODS We conducted a systematic review of the literature following PRISMA guidelines.Using the PubMed/MEDLINE,Embase,and Web of Science databases,we queried all publications in the English-language literature investigating the effect of oxysterols on in vivo bone formation.Articles were screened for eligibility using PICOS criteria and assessed for potential bias using an expanded version of the SYRCLE Risk of Bias assessment tool.All full-text articles examining the effect of oxysterols on in vivo bone formation were included.Extracted data included:Animal species,surgical/defect model,description of therapeutic and control treatments,and method for assessing bone growth.Primary outcome was fusion rate for spinal fusion models and percent bone regeneration for critical-sized defect models.Data were tabulated and described by both surgical/defect model and oxysterol employed.Additionally,data from all included studies were aggregated to posit the mechanism by which oxysterols may mediate in vivo bone formation.RESULTS Our search identified 267 unique articles,of which 27 underwent full-text review.Thirteen studies(all preclinical)met our inclusion/exclusion criteria.Of the 13 included studies,5 employed spinal fusion models,2 employed critical-sized alveolar defect models,and 6 employed critical-sized calvarial defect models.Based upon SYRCLE criteria,the included studies were found to possess an overall“unclear risk of bias”;54%of studies reported treatment randomization and 38%reported blinding at any level.Overall,seven unique oxysterols were evaluated:20(S)-hydroxycholesterol,22(R)-hydroxycholesterol,22(S)-hydroxycholesterol,Oxy4/Oxy34,Oxy18,Oxy21/Oxy133,and Oxy49.All had statistically significant in vivo osteoinductive properties,with Oxy4/Oxy34,Oxy21/Oxy133,and Oxy49 showing a dose-dependent effect in some cases.In the eight studies that directly compared oxysterols to rhBMP-2-treated animals,similar rates of bone growth occurred in the two groups.Biochemical investigation of these effects suggests that they may be primarily mediated by direct activation of Smoothened in the Hedgehog signaling pathway.CONCLUSION Present preclinical evidence suggests oxysterols significantly augment in vivo bone formation.However,clinical trials are necessary to determine which have the greatest therapeutic potential for orthopaedic surgery patients.展开更多
Novel bioactive injectable composites based on biopolymeric hydrogels reinforced with insulin-functionalized silica particles were synthesized.The insulin(INS)was immobilized on the surface of amine-modifed silica par...Novel bioactive injectable composites based on biopolymeric hydrogels reinforced with insulin-functionalized silica particles were synthesized.The insulin(INS)was immobilized on the surface of amine-modifed silica particles employing covalent attachment by EDC/NHS chemistry and via electrostatic interaction.The resulting formulations were examined for the morphology(SEM),chemical composition(FTIR,XPS)as well as protein content.To facilitate the injectability and support the bone regeneration,developed particles were dispersed in biopolymeric sol composed of collagen,chitosan and lysinemodifed hyaluronic acid and crosslinked with genipin.By means of rheological study,the sol-gel in situ transition of obtained systems was verifed.It was found in vitro study that MG-63 cells cultured on the developed composites exhibit signifcantly higher alkaline phosphatase(ALP)activity,compared to the pristine hydrogel.Furthermore,the biomineralization ability in the simulated body fluid(SBF)model was also demonstrated.Our fndings suggest that proposed herein novel hydrogel-based composites might be the promising formulation for regeneration of bone defects,especially as a less-cost effective support/alternative for BMP-2 systems.展开更多
In this paper,we used Corn Stalk(CS)as a renewable and economical bio template to fabricate willemite scaffolds with the potential application in skull bone repair.CS was used as a sacrificial template to synthesize t...In this paper,we used Corn Stalk(CS)as a renewable and economical bio template to fabricate willemite scaffolds with the potential application in skull bone repair.CS was used as a sacrificial template to synthesize the scaffolds.Willemite scaffolds with the chemical formula of Zn2SiO4 and pore size in the range of 3 to 10µm could be successfully synthesized by soaking CS in the willemite solution for 24 h and sintering at 950°C for 5 h.The porosity of the samples was controlled by the soaking time(between 12 and 48 h)in the willemite solution from 5 to 35%,respectively.The properties of these scaffolds showed a good approximation with cranial bone tissue.In addition,cytotoxicity assays(MTT)were performed on Human Bone Marrow Stromal cells(HBMSc)and A172 human glioblastoma cell lines by direct and indirect culture methods to estimate their toxicity for bone and nerve cells,respectively.Alkaline Phosphatase(ALP)activity and DAPI/Phalloidin cell staining were also performed to investigate the efficiency of the scaffolds for bone tissue engineering applications.The results showed that the scaffolds had good biocompatibility with both HBMSC and A172 cells,noticeable improvement on ALP activity,and great apatite formation ability in Simulated Body Fluid(SBF).All the evidence ascertained that willemite scaffolds made by corn stalks could be a useful candidate for bone tissue engineering applications.展开更多
Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called s...Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs.These are utilized to attach the right cells and then grow them.Rapid prototyping appears to be the most promising technology due to its high level of precision and control.Bone tissue replacement“scaffolding”is a common theme discussed in this article.The fused deposition technique was used to construct our scaffold,and a polymer called polylactic acids and soybean oil resin were used to construct our samples.The samples were then divided into two groups;the first group was left without immersion in the simulated body fluid and served as a control for comparison.The second group was immersed in the simulated body fluid.The results of the Field Emission Scanning Electron Microscope(FESEM),Energy Dispersive X-ray Spectroscopy(EDX)and X-ray diffraction(XRD)were utilized to interpret the surface attachment to ions,elements,and compounds,giving us a new perspective on scaffold architecture.In this study,an innovative method has been used to print therapeutic scaffold that combines fused deposition three-dimensional printing with ultraviolet curing to create a high-quality biodegradable polymeric scaffold.Finally,the results demonstrate that adding soybean oil resin to the PLA increased ion attachment to the surface while also attracting tricalcium phosphate formation on the surface of the scaffold,which is highly promising in bone tissue replacement.In conclusion,the soybean oil resin,which is new in the field of bone tissue engineering,shows magnificent characteristics and is a good replacement biopolymer that replaces many ceramic and polymeric materials used in this field that have poor morphological characteristics.展开更多
文摘The ability to replicate the microenvironment of the human body through the fabrication of scaffolds is a significant achievement in the biomedical field.However,the search for the ideal scaffold is still in its infancy and there are significant challenges to overcome.In the modern era,the scientific community is increasingly turned to natural substances due to their superior biological ability,lower cost,biodegradability,and lower toxicity than synthetic lab-made products.Chitosan is a well-known polysaccharide that has recently garnered a high amount of attention for its biological activities,especially in 3D bone tissue engineering.Chitosan closely matches the native tissues and thus stands out as a popular candidate for bioprinting.This review focuses on the potential of chitosan-based scaffolds for advancements and the drawbacks in bone treatment.Chitosan-based nanocomposites have exhibited strong mechanical strength,water-trapping ability,cellular interaction,and biodegradability.Chitosan derivatives have also encouraged and provided different routes for treatment and enhanced biological activities.3D tailored bioprinting has opened new doors for designing and manufacturing scaffolds with biological,mechanical,and topographical properties.
文摘The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of Three-Dimensional(3D)-printed Polycaprolactone(PCL)scaffolds with varying proportions of Nanohydroxyapatite(NHA)and Nanoclay(NC),and their physiochemical and biological properties were assessed.The mechanical properties of PCL are satisfactory;however,its hydrophobic nature and long-term degradation hinder its use in scaffold fabrication.NHA and NC have been employed to improve the hydrophilic characteristics,mechanical strength,adhesive properties,biocompatibility,biodegradability,and osteoconductive behavior of PCL.The morphology results demonstrated 3D-printed structures with interconnected rectangular macropores and proper nanoparticle distribution.The sample containing 70 wt%NC showed the highest porosity(65.98±2.54%),leading to an increased degradation rate.The compressive strength ranged from 10.65±1.90 to 84.93±9.93 MPa,which is directly proportional to the compressive strength of cancellous bone(2–12 MPa).The wettability,water uptake,and biodegradability of PCL scaffolds considerably improved as the amount of NC increased.The results of the cellular assays exhibited increased proliferation,viability,and adhesion of MG-63 cells due to the addition of NHA and NC to the scaffolds.Finally,according to the in vitro results,it can be concluded that 3D-printed samples with higher amounts of NC can be regarded as a suitable scaffold for expediting the regeneration process of bone defects.
文摘Nonunion represents a crucial challenge in orthopedic medicine,demanding innovative solutions beyond the scope of traditional bone grafting methods.Among the various strategies available,magnesium(Mg)implants have been recognized for their biocompatibility and biodegradability.However,their susceptibility to rapid corrosion and degradation has garnered notable research interest in bone tissue engineering(BTE),particularly in the development of Mg-incorporated biocomposite scaffolds.These scaffolds gradually release Mg2+,which enhances immunomodulation,osteogenesis,and angiogenesis,thus facilitating effective bone regeneration.This review presents myriad fabrication techniques used to create Mg-incorporated biocomposite scaffolds,including electrospinning,three-dimensional printing,and sol-gel synthesis.Despite these advancements,the application of Mg-incorporated biocomposite scaffolds faces challenges such as controlling the degradation rate of Mg and ensuring mechanical stability.These limitations highlight the necessity for ongoing research aimed at refining fabrication techniques to better regulate the physicochemical and osteogenic properties of scaffolds.This review provides insights into the potential of Mg-incorporated biocomposite scaffolds for BTE and the challenges that need to be addressed for their successful translation into clinical applications.
基金supported by Chinese Academy of Sciences (The Applied Research of Bioactive Bone Implantation Materials, No. KGCX2-YW-207)
文摘Three-dimensional honeycomb-structured magnesium （Mg） scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactiveβ- tricalcium phosphate （β-TCP） coatings were prepared on and the biodegradation mechanism was simply evaluated the porous Mg to further improve its biocompatibility, in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells （UMR106） were well adhered and proliferated on the surface of the β- TCP coated porous Mg, which indicates that theβ-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
文摘A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide（ DLLA） and glycolide（ GA ） with Aspartic acid （ Asp ）-Polyethylene glycol（PEG） alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-（ PEG- Asp）n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid （naSBF）. Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- （ PEG-Asp ）n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- （ PEG-Asp ） n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-（ PEG- Asp ）n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.
文摘The biocompatibility and osteogenic activity of allogenic decalcified bone matrix (DBM) used as a carrier for bone tissue engineering were studied. Following the method described by Urist, allogenic DBM was made. In vitro, DBM and bone marrow stromal cell (BMSC) from rabbits were co-cultured for 3-7 days and subjected to HE staining, and a series of histomorphological observations were performed under phase-contrast microscopy and scanning electron microscopy (SEM). In vivo the mixture of DBM/BMSC co-cultured for 3 days was planted into one side of muscules sacrospinalis of rabbits, and the DBM without BMSC was planted into other side as control. Specimens were collected at postoperative week 1, 2 and 4, and subjected to HE staining, and observed under SEM. The results showed during culture in vitro, the BMSCs adherent to the wall of DBM grew, proliferated and had secretive activity. The in vivo experiment revealed that BMSCs and undifferentiated mesenchymal cells in the perivascular region invaded gradually and proliferated together in DBM/BMSC group, and colony-forming units of chondrocytes were found. Osteoblasts, trabecular bone and medullary cavity appeared. The inflammatory reaction around muscles almost disappeared at the second weeks. In pure DBM group, the similar changes appeared from the surface of the DBM to center, and the volume of total regenerate bones was less than the DBM/BMSC group at the same time. The results indicated that the mixture of DBM and BMSC had good biocompatibility and ectopic induced osteogenic activity.
基金supported by NIH R01 DE14190 and R21 DE22625 (HX)National Science Foundation of China 31100695 and 31328008 (LZ), 81401794 (PW)Maryland Stem Cell Research Fund and University of Maryland School of Dentistry
文摘Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate （CAP） biomaterials/scaffolds are of special interest as they share chemical/crystallographic similarities to inorganic components of bone. Three applications of nano-CaP are discussed in this review： nanostructured calcium phosphate cement （CPC）; nano-CaP composites; and nano-CaP coatings. The interactions between stem cells and nano-CaP are highlighted, including cell attachment, orientation/ morphology, differentiation and in vivo bone regeneration. Several trends can be seen： （i） nano-CaP biomaterials support stem cell attachment/proliferation and induce osteogenic differentiation, in some cases even without osteogenic supplements; （ii） the influence of nano-CaP surface patterns on cell alignment is not prominent due to non-uniform distribution of nano-crystals; （iii） nano-CaP can achieve better bone regeneration than conventional CaP biomaterials; （iv） combining stem cells with nano-CaP accelerates bone regeneration, the effect of which can be further enhanced by growth factors; and （v） cell microencapsulation in nano-CaP scaffolds is promising for bone tissue engineering. These understandings would help researchers to further uncover the underlying mechanisms and interactions in nano-CaP stem cell constructs in vitro and in vivo, tailor nano-CaP composite construct design and stem cell type selection to enhance cell function and bone regeneration, and translate laboratory findings to clinical treatments.
基金supported by grants from Shenzhen Key Medical Subject(No.SZXK023)Shenzhen“SanMing”Project of Medicine(No.SZSM201612092)+3 种基金Shenzhen Research and Development Projects(No.JCYJ20170307111755218)Guangdong Basic and Applied Basic Research Foundation(No.2019A1515011290)National Key Research and Development Program of China(No.2016YFC1102103)China Postdoctoral Science Foundation(No.2020M672756)
文摘Interconnectivity is the key characteristic of bone tissue engineering scaffold modulating cell migration,blood vessels invasion and transport of nutrient and waste.However,efforts and understanding of the interconnectivity of porous Mg is limited due to the diverse architectures of pore struts and pore size distribution of Mg scaffold systems.In this work,biomimetic hierarchical porous Mg scaffolds with tailored interconnectivity as well as pore size distribution were prepared by template replication of infiltration casting.Mg scaffold with better interconnectivity showed lower mechanical strength.Enlarging interconnected pores would enhance the interconnectivity of the whole scaffold and reduce the change of ion concentration,pH value and osmolality of the degradation microenvironment due to the lower specific surface area.Nevertheless,the degradation rates of five tested Mg scaffolds were no different because of the same geometry of strut unit.Direct cell culture and evaluation of cell density at both sides of four typical Mg scaffolds indicated that cell migration through hierarchical porous Mg scaffolds could be enhanced by not only bigger interconnected pore size but also larger main pore size.In summary,design of interconnectivity in terms of pore size distribution could regulate mechanical strength,microenvironment in cell culture condition and cell migration potential,and beyond that it shows great potential for personalized therapy which could facilitate the regeneration process.
基金supported by Isfahan University of Technology and Ministry of Sciences, Research & Technology in Iran and Materials Science & Engineering School of Nanyang Technological University in Singapore
文摘In this paper, preparation of nano-biphasic calcium phosphate （nBCP）, mechanical behavior and load-bearing of poly （lactide-co-glycolide） （PLGA） and PLGA/nBCP are presented. The nBCP with composition of 63/37 （w/w） HA/-TCP （hydroxyapatite/fl-tricalcium phosphate） was produced by heating of bovine bone at 700℃. Composite scaffolds were made by using PLGA matrix and 10-50 wt% nBCP powders as reinforcement material. All scaffolds were prepared by thermally induced solid-liquid phase separation （TIPS） at -60~C under 4 Pa （0.04 mbar） vacuum. The results of elastic modulus testing were adjusted with Ishai-Cohen and Narkis models for rigid polymeric matrix and compared to each other. PLGA/nBCP scaffolds with 30 wt% nBCP showed the highest value of yield strength among the scaffolds. In addition, it was found that by increasing the nBCP in scaffolds to 50 wt%, the modulus of elasticity was highly enhanced. However, the optimum value of yield strength was obtained at 30 wt% nBCP, and the agglomeration of reinforcing particles at higher percentages caused a reduction in yield strength. It is clear that the elastic modulus of matrix has the significant role in elastic modulus of scaffolds, as also the size of the filler particles in the matrix.
基金financially supported by the National Natural Science Foundation of China(No.82072074)the National Natural Science Foundation of China(No.51801198)+2 种基金funds of Scientific and Technological Plan of Fujian Province(No.2020Y0083)the Natural and Science Foundation of Fujian Province(No.2019I0027)the Funds of Scientific and Technological Plan of Fujian Province(No.2020L3026)。
文摘Lanthanum(La)has tremendous potential in the treatment and prevention of bone diseases especially osteoporosis and metabolic disorders.However,controlling its distribution and keeping the release of La^(3+)ions sustained and steady in the body is still a big challenge.In this study,we prepared La-OCP powders via co-precipitation method,and further prepared La-OCP/PLA porous scaffolds by 3 D printing.La^(3+)was successfully introduced into the OCP crystal structure and substituted Ca^(2+)at the Ca-5 and Ca-8 sites.In particular,some La^(3+)ions were deposited on the crystal surface in the form of nanoparticles.Both octacalcium phosphate(OCP,Ca_(8)H_(2)(PO_(4))_6·5 H_(2)O)crystals and nanoparticles played as the carriers for La^(3+)ions.The La-OCP/PLA scaffolds displayed obvious mineralization effects and sustained release of La^(3+).The scaffolds contained a uniform structure with rough micro surface topography which acted as a suitable pathway for BMSCs cells to adhere,grow and proliferation.At a certain La^(3+)concentration,the extracts from La-OCP/PLA scaffolds increased the expression of osteogenesis-related genes,thus promoting the osteogenic differentiation of BMSCs.Moreover,the extracts regulated the immune responses.The experiment in vivo proved that La-OCP/PLA porous scaffolds were safe and could enhance bone defect regeneration in vivo.These findings suggest that 3 D printed La-OCP/PLA porous scaffolds have promising potentials in bone tissue engineering.
基金supported by the National Natural Science Foundation of China (Nos. 82071164 and 82271016)Key Research Program of Sichuan Science and Technology Department (No. 2021YFS0052)。
文摘Metal-organic frameworks(MOFs), a class of hybrid materials, consist of organic linkers and bridging metal ions or clusters. Their tunable pore sizes, large surface area, good biocompatibility, structural variability in combination with materials and chemicals, and osteogenic effects provide potential approaches for bone tissue engineering and bone diseases. And there are more and more research on MOFs in the field of osteogenesis in recent years. This review presents an overall summary of the application in the bone tissue engineering and bone diseases of MOFs and their composites, starting with the synthesis of MOFs, which discusses the advantages and disadvantages of different syntheses. Then, the biological functions of MOFs are discussed, which are the basics of MOFs applied in the organism. Importantly,mechanisms and abundant applications of MOFs are detailed in the bone tissue engineering and bone diseases. Finally, some prospects of MOFs are discussed, for instance, exploring whether MOFs can be used to treat other bone diseases.
基金supported by the Science and Technology Commission of Shanghai Municipality(No.15JC1491003),China
文摘Bone defects arising from a variety of reasons cannot be treated effectively without bone tissue reconstruction.Autografts and allografts have been used in clinical application for some time,but they have disadvantages.With the inherent drawback in the precision and reproducibility of conventional scaffold fabrication techniques,the results of bone surgery may not be ideal.This is despite the introduction of bone tissue engineering which provides a powerful approach for bone repair.Rapid prototyping technologies have emerged as an alternative and have been widely used in bone tissue engineering,enhancing bone tissue regeneration in terms of mechanical strength,pore geometry,and bioactive factors,and overcoming some of the disadvantages of conventional technologies.This review focuses on the basic principles and characteristics of various fabrication technologies,such as stereolithography,selective laser sintering,and fused deposition modeling,and reviews the application of rapid prototyping techniques to scaffolds for bone tissue engineering.In the near future,the use of scaffolds for bone tissue engineering prepared by rapid prototyping technology might be an effective therapeutic strategy for bone defects.
基金Thiswork is financially supported by IranUniversity of Science and Technology(IUST)and Motamed Cancer Institute(ACECR).
文摘The optimization of the scaffolds to provide a suitable matrix and accelerate the regeneration process is vital for bone tissue engineering.However,poor mechanical and biological characteristics remain the primary challenges that must be addressed.For example,although bredigite(Br)has shown great potential for application in bone tissue engineering,it easily fails in replacement.In the present work,these challenges are addressed by reinforcing the Br matrix with nanosheets of graphene oxide(rGO)that have been reduced by bovine serum albumin(BSA)in order to enhance the mechanical properties and biological behavior.The reduction of graphene oxide by BSA improves the water stability of the nanosheets and provides an electrostatic interaction between theBSA-rGO nanosheets and theBr particles.The high thermal conductivity of theBSA-rGO nanosheets decreases the porosity of the Br by transferring heat to the core of the tablet.Furthermore,the addition of BSA-rGO nanosheets into the Br matrix enhances the adhesion of G-292 cells on the surface of the tablets.These findings suggest that the tablet consisting of BSA-rGO-reinforced Br has encouraging potential for application in bone tissue engineering.
基金National Natural Science Foundations of China(Nos.30973105,31271035)Science and Technology Commission of Shanghai Municipality,China(No.11nm0506200)Ph.D.Programs Foundation of Ministry of Education of China(No.20130075110005)
文摘Colloidal gels made of oppositely charged nanoparticles are a novel class of hydrogels and can exhibit pseudoplastic behavior which will enable them to mold easily into specific shapes.These moldable gels can be used as building blocks to self-assemble into integral scaffolds from bottom to up through electrostatic forces.However,they are too weak to maintain scaffold morphology just depending on interparticle interactions such as Van der Waals attraction and electrostatic forces especially for bone tissue engineering.In this study,oppositely charged gelatin nanoparticles were firstly prepared by two-step desolvation method,followed by the mixture with water to form colloid gels.To solve the problem of weak mechanical performance of colloid gels, gelatin macromolecules were introduced into the prepared gels to form blend gels.The blend gels can be easily processed into three-dimensional( 3D) porous scaffolds via motor assisted microsyringe( MAM)system,a nozzle-based rapid prototyping technology,under mild conditions.After fabrication the scaffolds were crosslinked by glutaraldehyde( GA,25% solution in water by weight),then the crosslinked gelatin macromolecules network could form to improve the mechanical properties of colloid gels.The average particle size and zeta potential of gelatin nanoparticles were measured by NanoZS instrument.The morphology and microstructures of scaffolds were characterized by macroscopic images.The mechanical properties of the scaffolds were studied by a universal material testing machine.
文摘BACKGROUND Bone tissue engineering is an area of continued interest within orthopaedic surgery,as it promises to create implantable bone substitute materials that obviate the need for autologous bone graft.Recently,oxysterols–oxygenated derivatives of cholesterol-have been proposed as a novel class of osteoinductive small molecules for bone tissue engineering.Here,we present the first systematic review of the in vivo evidence describing the potential therapeutic utility of oxysterols for bone tissue engineering.AIM To systematically review the available literature examining the effect of oxysterols on in vivo bone formation.METHODS We conducted a systematic review of the literature following PRISMA guidelines.Using the PubMed/MEDLINE,Embase,and Web of Science databases,we queried all publications in the English-language literature investigating the effect of oxysterols on in vivo bone formation.Articles were screened for eligibility using PICOS criteria and assessed for potential bias using an expanded version of the SYRCLE Risk of Bias assessment tool.All full-text articles examining the effect of oxysterols on in vivo bone formation were included.Extracted data included:Animal species,surgical/defect model,description of therapeutic and control treatments,and method for assessing bone growth.Primary outcome was fusion rate for spinal fusion models and percent bone regeneration for critical-sized defect models.Data were tabulated and described by both surgical/defect model and oxysterol employed.Additionally,data from all included studies were aggregated to posit the mechanism by which oxysterols may mediate in vivo bone formation.RESULTS Our search identified 267 unique articles,of which 27 underwent full-text review.Thirteen studies(all preclinical)met our inclusion/exclusion criteria.Of the 13 included studies,5 employed spinal fusion models,2 employed critical-sized alveolar defect models,and 6 employed critical-sized calvarial defect models.Based upon SYRCLE criteria,the included studies were found to possess an overall“unclear risk of bias”;54%of studies reported treatment randomization and 38%reported blinding at any level.Overall,seven unique oxysterols were evaluated:20(S)-hydroxycholesterol,22(R)-hydroxycholesterol,22(S)-hydroxycholesterol,Oxy4/Oxy34,Oxy18,Oxy21/Oxy133,and Oxy49.All had statistically significant in vivo osteoinductive properties,with Oxy4/Oxy34,Oxy21/Oxy133,and Oxy49 showing a dose-dependent effect in some cases.In the eight studies that directly compared oxysterols to rhBMP-2-treated animals,similar rates of bone growth occurred in the two groups.Biochemical investigation of these effects suggests that they may be primarily mediated by direct activation of Smoothened in the Hedgehog signaling pathway.CONCLUSION Present preclinical evidence suggests oxysterols significantly augment in vivo bone formation.However,clinical trials are necessary to determine which have the greatest therapeutic potential for orthopaedic surgery patients.
基金the financial support of National Science Centre,Poland,Grant 2016/21/D/ST5/01635。
文摘Novel bioactive injectable composites based on biopolymeric hydrogels reinforced with insulin-functionalized silica particles were synthesized.The insulin(INS)was immobilized on the surface of amine-modifed silica particles employing covalent attachment by EDC/NHS chemistry and via electrostatic interaction.The resulting formulations were examined for the morphology(SEM),chemical composition(FTIR,XPS)as well as protein content.To facilitate the injectability and support the bone regeneration,developed particles were dispersed in biopolymeric sol composed of collagen,chitosan and lysinemodifed hyaluronic acid and crosslinked with genipin.By means of rheological study,the sol-gel in situ transition of obtained systems was verifed.It was found in vitro study that MG-63 cells cultured on the developed composites exhibit signifcantly higher alkaline phosphatase(ALP)activity,compared to the pristine hydrogel.Furthermore,the biomineralization ability in the simulated body fluid(SBF)model was also demonstrated.Our fndings suggest that proposed herein novel hydrogel-based composites might be the promising formulation for regeneration of bone defects,especially as a less-cost effective support/alternative for BMP-2 systems.
文摘In this paper,we used Corn Stalk(CS)as a renewable and economical bio template to fabricate willemite scaffolds with the potential application in skull bone repair.CS was used as a sacrificial template to synthesize the scaffolds.Willemite scaffolds with the chemical formula of Zn2SiO4 and pore size in the range of 3 to 10µm could be successfully synthesized by soaking CS in the willemite solution for 24 h and sintering at 950°C for 5 h.The porosity of the samples was controlled by the soaking time(between 12 and 48 h)in the willemite solution from 5 to 35%,respectively.The properties of these scaffolds showed a good approximation with cranial bone tissue.In addition,cytotoxicity assays(MTT)were performed on Human Bone Marrow Stromal cells(HBMSc)and A172 human glioblastoma cell lines by direct and indirect culture methods to estimate their toxicity for bone and nerve cells,respectively.Alkaline Phosphatase(ALP)activity and DAPI/Phalloidin cell staining were also performed to investigate the efficiency of the scaffolds for bone tissue engineering applications.The results showed that the scaffolds had good biocompatibility with both HBMSC and A172 cells,noticeable improvement on ALP activity,and great apatite formation ability in Simulated Body Fluid(SBF).All the evidence ascertained that willemite scaffolds made by corn stalks could be a useful candidate for bone tissue engineering applications.
文摘Tissue engineering’s main goal is to regenerate or replace tissues or organs that have been destroyed by disease,injury,or congenital disabilities.Tissue engineering now uses artificial supporting structures called scaffolds to restore damaged tissues and organs.These are utilized to attach the right cells and then grow them.Rapid prototyping appears to be the most promising technology due to its high level of precision and control.Bone tissue replacement“scaffolding”is a common theme discussed in this article.The fused deposition technique was used to construct our scaffold,and a polymer called polylactic acids and soybean oil resin were used to construct our samples.The samples were then divided into two groups;the first group was left without immersion in the simulated body fluid and served as a control for comparison.The second group was immersed in the simulated body fluid.The results of the Field Emission Scanning Electron Microscope(FESEM),Energy Dispersive X-ray Spectroscopy(EDX)and X-ray diffraction(XRD)were utilized to interpret the surface attachment to ions,elements,and compounds,giving us a new perspective on scaffold architecture.In this study,an innovative method has been used to print therapeutic scaffold that combines fused deposition three-dimensional printing with ultraviolet curing to create a high-quality biodegradable polymeric scaffold.Finally,the results demonstrate that adding soybean oil resin to the PLA increased ion attachment to the surface while also attracting tricalcium phosphate formation on the surface of the scaffold,which is highly promising in bone tissue replacement.In conclusion,the soybean oil resin,which is new in the field of bone tissue engineering,shows magnificent characteristics and is a good replacement biopolymer that replaces many ceramic and polymeric materials used in this field that have poor morphological characteristics.
