In this study,an alternative precursor for production of activated carbon was introduced using dragon fruit(Hylocereus costaricensis)peel(DFP).Moreover,KOH was used as a chemical activator in the thermal carbonization...In this study,an alternative precursor for production of activated carbon was introduced using dragon fruit(Hylocereus costaricensis)peel(DFP).Moreover,KOH was used as a chemical activator in the thermal carbonization process to convert DFP into activated carbon(DFPAC).In order to accomplish this research,several approaches were employed to examine the elemental composition,surface properties,amorphous and crystalline nature,essential active group,and surface morphology of the DFPAC.The BrunauerEmmettTeller test demonstrated a mesoporous structure of the DFPAC has a high surface area of 756.3 m2g 1.The cationic dye Methylene Blue(MB)was used as a probe to assess the efficiency of DFPAC towards the removal of MB dye from aqueous solution.The effects of adsorption input factors(e.g.DFPAC dose(A:0.040.12 g L 1),pH(B:310),and temperature(C:3050℃))were investigated and optimized using statistical analysis(i.e.BoxBehnken design(BBD)).The adsorption kinetic model can be best categorized as the pseudofirst order(PFO).Whereas,the adsorption isotherm model can be best described by Langmuir model,with maximum adsorption capacity of DFPAC for MB dye was 195.2 mg g 1 at 50℃.The adsorption mechanism of MB by DFPAC surface was attributed to the electrostatic interaction,pp interaction,and Hbonding.Finally,the results support the ability of DFP to be a promising precursor for production of highly porous activated carbon suitable for removal of cationic dyes(e.g.MB).展开更多
Au-TiO<sub>2</sub> catalysts were used in the photocatalytic degradation of the methylene blue dye (MB). The synthesis of titanium oxide (TiO<sub>2</sub>) was carried out by sol-gel method. Sub...Au-TiO<sub>2</sub> catalysts were used in the photocatalytic degradation of the methylene blue dye (MB). The synthesis of titanium oxide (TiO<sub>2</sub>) was carried out by sol-gel method. Subsequently, particles of Au were deposited on the surface of the semiconductor by photo-deposition, thus modifying the surface of the semiconductor. For the characterization of the catalyst obtained, the techniques of X-ray Diffraction (DRX), Scanning Electron Microscopy (SEM), Spectroscopy with Diffuse Reflectance (DR) and Surface Area by the BET (Brunauer, Emmett y Teller) were used. The solid obtained was tested experimentally as a catalyst in the photocatalytic degradation of a solution of MB. The data obtained were analyzed by UV-vis Spectroscopy and Total Organic Carbon (TOC) and the results indicated conversions were greater than 80%. The intermediate products were evaluated by mass coupled gas chromatography (GC-MS) and the MB decomposition route was by hydroxylation, obtaining aromatic intermediates, esters and products of the chemical degradation of the molecule.展开更多
The aim of this case report is to present a novel approach to the management of very severe anaphylactic reaction to Patent Blue Dye used in Sentinel Node Biopsy for breast cancer treatment. The severity and duration ...The aim of this case report is to present a novel approach to the management of very severe anaphylactic reaction to Patent Blue Dye used in Sentinel Node Biopsy for breast cancer treatment. The severity and duration of cardiovascular effects has not been described previously in this setting. Comprehensive ICU support including heamofiltration resulted in the patients’ complete recovery and successful long-term well-being despite a change to our routine cancer care plan.展开更多
In this study,Palm kernel shell(PKS)is utilized as a raw material to produce activated biochar as adsorbent for dye removal from wastewater,specifically methylene blue(MB)dye,by utilizing a simplified and costeffectiv...In this study,Palm kernel shell(PKS)is utilized as a raw material to produce activated biochar as adsorbent for dye removal from wastewater,specifically methylene blue(MB)dye,by utilizing a simplified and costeffective approach.Production of activated biocharwas carried out using both a furnace and a domesticmicrowave oven without an inert atmosphere.Three samples of palm kernel shell(PKS)based activated biochar labeled as samples A,B and C were carbonized inside the furnace at 800℃ for 1 h and then activated using the microwave-heating technique with varying heating times(0,5,10,and 15 min).The heating was conducted in the absence of an inert gas.Fourier Transform Infrared Spectroscopy(FTIR)highlighted a significant Si-O stretching vibration between 1040.5 to 692.7 cm−1,indicating the presence of key components(Silica and Alumina)in all PKS-based activated biochar samples.For wastewater treatment,activated biochar samples were tested against a 20 mg/LMethylene Blue(MB)solution,and the MB percentage removal was calculated for each run using a standard curve.Central Composite Design(CCD)experiments were conducted for optimization,with activated biochar Sample C exhibiting the highest adsorption capacity at 88.14%MB removal under specific conditions.ANOVA analysis confirmed the significance of the quadratic model,with a p-value of 0.0222 and R^(2)=0.9438.In conclusion,the results demonstrated the efficiency of PKS-based activated biochar as an adsorbent for MB removal in comparison to other commercial adsorbents.展开更多
Background:Methylene blue is the most commonly used tracer for sentinel lymph node(SLN)biopsy(SLNB)in China.This study aimed to investigate the feasibility of clinical application of SLNB using methylene blue dye(MBD)...Background:Methylene blue is the most commonly used tracer for sentinel lymph node(SLN)biopsy(SLNB)in China.This study aimed to investigate the feasibility of clinical application of SLNB using methylene blue dye(MBD)for early breast cancer and the prognosis of patients with different SLN and non-SLN statuses.Methods:We retrospectively analyzed the clinicopathological data of patients with early breast cancer treated at the Peking University First Hospital between 2013 and 2018.We calculated the SLN identification rate(IR)in SLNB with MBD and the false-negative rate(FNR),and analyzed the prognosis of patients with different SLN and non-SLN statuses using Kaplan-Meier curves.Results:Between January 2013 and December 2018,1603 patients with early breast cancer underwent SLNB with MBD.The SLN IR was 95.8%(1536/1603).Two SLNs(median)were detected per patient.There were significant differences in FNR between patients with SLN micrometastasis and macrometastasis(19.0%vs.4.5%,χ^(2)=12.771,P<0.001).Chi-square test showed that there were significant differences in SLN successful detection rates among patients with different vascular tumor embolism status(96.3%vs.90.8%,χ^(2)=9.013,P=0.003)and tumor(T)stages(96.6%vs.94.1%,χ^(2)=5.189,P=0.023).Multivariate analysis showed that vascular tumor embolism was the only independent factor for SLN successful detection(odds ratio:0.440,95%confidence interval:0.224-0.862,P=0.017).Survival analysis showed a significant difference in disease-free survival(DFS)between patients with non-SLN metastasis and patients without non-SLN metastasis(P=0.006).Conclusion:Our single-center data show that,as a commonly used tracer in SLNB in China,MBD has an acceptable SLN IR and a low FNR in frozen sections.This finding is consistent with reports of dual tracer-guided SLNB.Positive SLNs with non-SLN metastasis are associated with DFS.展开更多
A novel polymeric dye of aqueous dispersion poly[urethane-(disperse blue 14)-urethane] was synthesized based on poly(propylene glycol) (PPG), 2, 4-tolylene diisocyanate (TDI), klimethylol propionic acid (DMPA), disp...A novel polymeric dye of aqueous dispersion poly[urethane-(disperse blue 14)-urethane] was synthesized based on poly(propylene glycol) (PPG), 2, 4-tolylene diisocyanate (TDI), klimethylol propionic acid (DMPA), disperse blue 14 and triethylamine (TEA) depending on a modified acetone process. Fourier transform infrared spectroscopy (FTIR) was used to identify Lhe structure of the polymeric dye, indicating an obvious carbonyl stretching absorption in disperse blue 14. The polymer was also characterized by the analysis of DSC, TGA, WAXD and UV-Vis spectroscopy.展开更多
Reactive blue rare earth dyestuffs were prepared by using reactive blue and lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, erbi...Reactive blue rare earth dyestuffs were prepared by using reactive blue and lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, erbium oxide, lutetium oxide and yttrium oxide respectively for dyeing silk cloth. The degrees of dyeing of reactive blue gadolinium and fixation of reactive blue neodymium were the biggest respectively, were 84.83% and 97.96 respectively, were 24.13% and 8.36% were increased with that of reactive blue respectively. The spectra of reactive blue rare earths and reactive blue were studied by UV-VIS. In 200.00～800.00 nm, the λmax of reactive blue, reactive blue lanthanum, reactive blue praseodymium, reactive blue neodymium, reactive blue samarium, reactive blue europium, reactive blue gadolinium, reactive blue terbium, reactive blue dysprosium, reactive blue erbium, reactive blue lutetium and reactive blue yttrium are 599.00, 600.00, 602.00, 601.00, 600.00, 600.50, 600.50, 601.00, 600.00, 600.50, 599.50 and 600.50 nm respectively. Reactive blue lanthanum, reactive blue praseodymium, reactive blue neodymium, reactive blue samarium, reactive blue europium, reactive blue gadolinium, reactive blue terbium, reactive blue dysprosium, reactive blue erbium, reactive blue lutetium, reactive blue yttrium and reactive blue had almost same color.展开更多
The objective in this study is to investigate the adsorption-degradation of the methylene blue(MB)dye using a fabricated heterojunction Ag@TiO_(2)nanocomposite.The batch factors used in photo catalytic reactions were ...The objective in this study is to investigate the adsorption-degradation of the methylene blue(MB)dye using a fabricated heterojunction Ag@TiO_(2)nanocomposite.The batch factors used in photo catalytic reactions were pH,UV-irradiation time,temperature,catalytic dosage,and concentration of MB.The results showed that 0.2×10^(3) g·ml^(-1))of the catalytic dose caused the Ag@TiO_(2)adsorption to degrade by 96.67%with darks and UV exposure.Using the Langmuir-Hinshelwood model to determine the kinetic,the Ag@TiO_(2)displays a greater kinetic rate than TiO_(2)and silver nanoparticle(AgNPs).The photocatalytic degradation of MB,which is an endothermic reaction involving all catalysts,is shown by the thermodynamic parameter to have the positive value of enthalpy(ΔH°).The enthalpies observed were Ag@TiO_(2)(126.80 kJ·mol^(-1))<AgNPs(354.47 kJ·mol^(-1))<TiO_(2)(430.04 kJ·mol^(-1)).Ascorbic acid(·OH scavenger),2-propanol(·O_(2)scavenger),and ammonium oxalate(AO)(hole h+scavenger)were employed to conduct the scavenger effects.The Ag@TiO_(2)demonstrated a reduction in MB degradation when combined with 2-propanol,and this clearly demonstrated that,in contrast to hydroxyl radicals(·OH)and holeh scavengers,superoxide radical anion(O_(2)scavenger)plays a significant role in MB degradation.Utilizing density functional theory(DFT)to elucidate the mechanism and B3LYP/6-311+G(d,p)level optimization,the degradation-adsorption process was explained.When the N-N,C-N or C-C bonds were severed,the Fukui faction was demonstrated for nucleophilic,electrophilic,and radical attack.展开更多
Magnetic field was tentatively introduced into Fenton reactions system for the degradation and discoloration of methyl blue as the represent of organic chemical dye, which was a bio-refractory organic pollutant in ind...Magnetic field was tentatively introduced into Fenton reactions system for the degradation and discoloration of methyl blue as the represent of organic chemical dye, which was a bio-refractory organic pollutant in industry wastewater. It was found that under optimal Fenton reaction conditions, with the assistant of magnetic field in Fenton reactions, the degradation rate of methyl blue, the decomposition rate of H2O2 and the conversion rate of Fe^2＋ were accelerated, the extent of them would be improved by the increase of magnetic field intensity. Meanwhile, the mineralization of methyl blue （CODer） was improved by over 10% with magnetic field.展开更多
Synthesis of malachite@clay nanocomposite was successfully carried out for the removal of cationic（Methylene Blue,MB） and anionic dyes（Congo Red,CR） from synthetic wastewater.Nanocomposite was characterized by TEM...Synthesis of malachite@clay nanocomposite was successfully carried out for the removal of cationic（Methylene Blue,MB） and anionic dyes（Congo Red,CR） from synthetic wastewater.Nanocomposite was characterized by TEM,SEM,FT-IR,EDS analysis and zeta potential.TEM analysis indicated that the particle diameter of nanocomposite was in the range of 14 to23 nm.Various important parameters viz.contact time,concentration of dyes,nanocomposite dosage,temperature and solution pH were optimized to achieve maximum adsorption capacity.In the case of MB,removal decreased from 99.82%to 93.67%while for CR,removal decreased from 88.55%to 75.69%on increasing dye concentration from 100 to 450 mg/L.pH study confirmed the higher removal of CR in acidic range while MB removal was higher in alkaline range.Kinetic study revealed the applicability of pseudo-second-order model for the adsorption of both dyes.Negative values of AG0 for both systems suggested the feasibility of dye removal and support for spontaneous adsorption of CR and MB on nanocomposite.Nanocomposite showed 277.77 and 238.09 mg/g Langmuir adsorption capacity for MB and CR respectively.Desorption of dyes from the dye loaded nanocomposite was easily carried out with acetone.The results indicate that the prepared malachite@clay nanocomposite is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.展开更多
Ionizing radiation is a promising method for dye degradation or textile coloration using commercial azo dyes and small molecular weight organic dyes. Thus, the stability of the molecular structure of an azo dye is imp...Ionizing radiation is a promising method for dye degradation or textile coloration using commercial azo dyes and small molecular weight organic dyes. Thus, the stability of the molecular structure of an azo dye is important under ionizing radiation. Disperse Blue 79, as an example azo dyes, was irradiated with gamma rays or electron beam (EB) to investigate the radiation-induced effects on the molecular structure. Ultraviolet visible spectroscopy (UV Vis), nuclear magnetic resonance (NMR) spectra analysis, and mass spectrometry (MS) studies indicated that acetoxy and methoxyl were easily cleaved on the irradiation of the aqueous dye solution but retained a stable structure on the irradiation of the powder form. Gamma rays and EB showed similar effects on the decomposition process. Chromaticity changes using the Lab* method showed that the dye turned to dark yellow and the value of b* of the irradiated dyes increased with the increasing absorbed dose, which indicated that Disperse Blue 79 could be partly decomposed in an aqueous solution This work was nancially supported by the National Natural Science Foundation of China (Nos. 11875313, 11605274, and 11575277). Xiao-Jun Ding and Ming Yu contributed equally to this work. & Jing-Ye Li jyli@shnu.edu.cn 1 Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China 2 University of Chinese Academy of Sciences, Beijing 100049, China 3 The Education Ministry Key Lab of Resource Chemistry, Shanghai Key Lab of Rare Earth Functional Materials, College of Chemistry and Materials Science, Shanghai Normal University, Shanghai 200234, China with an absorbed dose of 10 kGy. Furthermore, the results demonstrated that the chemical stability of the Disperse Blue 79 under ionizing radiation are different in its powder form with the dye in the aqueous solution.展开更多
Aniline blue, one of the triphenylmethane dyes, is the most commonly produced and used of these dyes yet it is also the most dangerous and the most serious cause of pollution amongst them. An exploration of aniline bl...Aniline blue, one of the triphenylmethane dyes, is the most commonly produced and used of these dyes yet it is also the most dangerous and the most serious cause of pollution amongst them. An exploration of aniline blue degradation is likely to facilitate an understanding of the degradation mechanism for a range of related dyes. In this study, we managed to isolate a particular strain of microorganism, identified to be Lysinibacillus fusiformis N019a, which showed a significant capacity for aniline blue degradation in both laboratory tests and natural sewage treatment. In analysis aided by a UV-Visible spectrophotometer, we found that 96.7% of aniline blue had degraded within 24 hours under laboratory conditions. When treating natural sewage, 80.1% of the aniline blue was removed after just 16 hours. Further analysis has shown that Lysinibacillus fusiformis N019a has a strong resistance to Cu2+, Mn2+, Zn2+, and Pb2+. We also found that the degradation product of aniline blue by Lysinibacillus fusiformis N019a was of reduced toxicity to plants and microbes.展开更多
The nanophotocatalytic process using semiconducting oxides with a nanostructure is one of the technologies used for the destructive oxidation of organic compounds such as dyes. The photocatalytic oxidation of a textil...The nanophotocatalytic process using semiconducting oxides with a nanostructure is one of the technologies used for the destructive oxidation of organic compounds such as dyes. The photocatalytic oxidation of a textile dye—C. I. Basic Blue 41 (BB41) in aqueous solution was assessed by UV ray irradiation in the presence of TiO2 nanoparticles. The effect of initial dye concentration, pH and TiO2 loading were investigated and the optimized conditions for maximum amount of degradation were determined. Analysis of the kinetics showed pseudo-first-order model. The mineralization of the dye was reported by measuring the initial and final chemical oxygen demand of the solution that was irradiated under optimized conditions.展开更多
The best conditions for synthesis of starch hydroxypropyl sulphate as per the dry method were firstly established. This was done through a thorough investigation into factors affecting the synthesis including concentr...The best conditions for synthesis of starch hydroxypropyl sulphate as per the dry method were firstly established. This was done through a thorough investigation into factors affecting the synthesis including concentrations of both the NaOH catalyst and the 2-hydroxy-3-chloropropyl sulphate along with duration and temperature of the reaction. The resultant newly synthesized 2-hydroxy-3-chloropropyl sulphate was then reacted with starch to obtain starch hydroxypropyl sulphate ultimately. After being characterized by making use of IR spectroscopy analysis and scanning electronic microscope, the starch hydroxypropyl sulphate samples were submitted to evaluation for cationic dye removal using Methylene Blue (MB). Cationic dye removal was studied under a variety of conditions. Factors involved encompass initial dye concentration, duration, sulphur %, pH and adsorbent dose. 100% dye removal could be achieved under certain conditions which were described in the text.展开更多
We have investigated third order nonlinear optical properties and spectral characteristics of methylene blue dye in both polymer and liquid mixtures. The spectral characteristics of the dye is studied by recording the...We have investigated third order nonlinear optical properties and spectral characteristics of methylene blue dye in both polymer and liquid mixtures. The spectral characteristics of the dye is studied by recording the absorption and fluorescence spectra of the dye doped in poly(methylmethacrylate) modified with additive n-butyl acetate(nBA) and the dye in MMA and nBA (liquid mixture). The spectral results of the dye doped polymer rod are compared with dye in liquid Mixture. The nonlinear measurements of the dye in liquid and polymer medium were performed using CW He-Ne laser of wavelength 632.8 nm by employing z-scan technique. The dye methylene blue showed a negative nonlinear refractive index.展开更多
A systematic study of the synthesis of C.I.Acid Blue 9 leuco compound in water is reported.The kinetic analysis of experimental data for the condensation reaction between 2-formylbenzenesulfonic acid sodium and N-ethy...A systematic study of the synthesis of C.I.Acid Blue 9 leuco compound in water is reported.The kinetic analysis of experimental data for the condensation reaction between 2-formylbenzenesulfonic acid sodium and N-ethyl-N-(3'-sulfonic acid benzyl) aniline obtained at four different temperatures ranging between 85 and 100°C is discussed.It is shown that the reaction followed second-order rate kinetics.The overall rate constant(k) increased with the increase of temperature.On the basis of the value of k,activation energy(E_a) of the reaction was evaluated.Importantly,it is found that reactant concentration has great effect on the formation of C.I.Acid Blue 9 leuco compound,implying that it is not enough to improve the conversion of N-ethyl-N-(3'-sulfonic acid benzyl) aniline by only prolonging reaction time in the late period of the reaction.展开更多
基金the Universiti Teknologi MARA,Institute of Research Management and Innovation(Institut Pengu-rusan Penyelidikan&Inovasi)for funding this project underLES-TARI grant(600-IRMI 5/3/LESTARI(037/2019)).The authors Zeid A.ALOthman and Mohammad Rizwan Khan are thankful to the Researchers Supporting Project(RSP-2020/138),King Saud University,Riyadh,Saudi Arabia.
文摘In this study,an alternative precursor for production of activated carbon was introduced using dragon fruit(Hylocereus costaricensis)peel(DFP).Moreover,KOH was used as a chemical activator in the thermal carbonization process to convert DFP into activated carbon(DFPAC).In order to accomplish this research,several approaches were employed to examine the elemental composition,surface properties,amorphous and crystalline nature,essential active group,and surface morphology of the DFPAC.The BrunauerEmmettTeller test demonstrated a mesoporous structure of the DFPAC has a high surface area of 756.3 m2g 1.The cationic dye Methylene Blue(MB)was used as a probe to assess the efficiency of DFPAC towards the removal of MB dye from aqueous solution.The effects of adsorption input factors(e.g.DFPAC dose(A:0.040.12 g L 1),pH(B:310),and temperature(C:3050℃))were investigated and optimized using statistical analysis(i.e.BoxBehnken design(BBD)).The adsorption kinetic model can be best categorized as the pseudofirst order(PFO).Whereas,the adsorption isotherm model can be best described by Langmuir model,with maximum adsorption capacity of DFPAC for MB dye was 195.2 mg g 1 at 50℃.The adsorption mechanism of MB by DFPAC surface was attributed to the electrostatic interaction,pp interaction,and Hbonding.Finally,the results support the ability of DFP to be a promising precursor for production of highly porous activated carbon suitable for removal of cationic dyes(e.g.MB).
文摘Au-TiO<sub>2</sub> catalysts were used in the photocatalytic degradation of the methylene blue dye (MB). The synthesis of titanium oxide (TiO<sub>2</sub>) was carried out by sol-gel method. Subsequently, particles of Au were deposited on the surface of the semiconductor by photo-deposition, thus modifying the surface of the semiconductor. For the characterization of the catalyst obtained, the techniques of X-ray Diffraction (DRX), Scanning Electron Microscopy (SEM), Spectroscopy with Diffuse Reflectance (DR) and Surface Area by the BET (Brunauer, Emmett y Teller) were used. The solid obtained was tested experimentally as a catalyst in the photocatalytic degradation of a solution of MB. The data obtained were analyzed by UV-vis Spectroscopy and Total Organic Carbon (TOC) and the results indicated conversions were greater than 80%. The intermediate products were evaluated by mass coupled gas chromatography (GC-MS) and the MB decomposition route was by hydroxylation, obtaining aromatic intermediates, esters and products of the chemical degradation of the molecule.
文摘The aim of this case report is to present a novel approach to the management of very severe anaphylactic reaction to Patent Blue Dye used in Sentinel Node Biopsy for breast cancer treatment. The severity and duration of cardiovascular effects has not been described previously in this setting. Comprehensive ICU support including heamofiltration resulted in the patients’ complete recovery and successful long-term well-being despite a change to our routine cancer care plan.
文摘In this study,Palm kernel shell(PKS)is utilized as a raw material to produce activated biochar as adsorbent for dye removal from wastewater,specifically methylene blue(MB)dye,by utilizing a simplified and costeffective approach.Production of activated biocharwas carried out using both a furnace and a domesticmicrowave oven without an inert atmosphere.Three samples of palm kernel shell(PKS)based activated biochar labeled as samples A,B and C were carbonized inside the furnace at 800℃ for 1 h and then activated using the microwave-heating technique with varying heating times(0,5,10,and 15 min).The heating was conducted in the absence of an inert gas.Fourier Transform Infrared Spectroscopy(FTIR)highlighted a significant Si-O stretching vibration between 1040.5 to 692.7 cm−1,indicating the presence of key components(Silica and Alumina)in all PKS-based activated biochar samples.For wastewater treatment,activated biochar samples were tested against a 20 mg/LMethylene Blue(MB)solution,and the MB percentage removal was calculated for each run using a standard curve.Central Composite Design(CCD)experiments were conducted for optimization,with activated biochar Sample C exhibiting the highest adsorption capacity at 88.14%MB removal under specific conditions.ANOVA analysis confirmed the significance of the quadratic model,with a p-value of 0.0222 and R^(2)=0.9438.In conclusion,the results demonstrated the efficiency of PKS-based activated biochar as an adsorbent for MB removal in comparison to other commercial adsorbents.
基金Beijing Medical Award Foundation(No.YXJL-2016-0040-0065)Beijing Medical Award Foundation"Clinical efficacy of liquid biopsy for breast cancer"(No.2017-2019)+2 种基金Beijing Medical Award Foundation"Precision medical research on breast cancer"Beijing Medical Award Foundation Youth Program(No.2018-0304)National Key R&D Program of China(No.2016YFC0901302)。
文摘Background:Methylene blue is the most commonly used tracer for sentinel lymph node(SLN)biopsy(SLNB)in China.This study aimed to investigate the feasibility of clinical application of SLNB using methylene blue dye(MBD)for early breast cancer and the prognosis of patients with different SLN and non-SLN statuses.Methods:We retrospectively analyzed the clinicopathological data of patients with early breast cancer treated at the Peking University First Hospital between 2013 and 2018.We calculated the SLN identification rate(IR)in SLNB with MBD and the false-negative rate(FNR),and analyzed the prognosis of patients with different SLN and non-SLN statuses using Kaplan-Meier curves.Results:Between January 2013 and December 2018,1603 patients with early breast cancer underwent SLNB with MBD.The SLN IR was 95.8%(1536/1603).Two SLNs(median)were detected per patient.There were significant differences in FNR between patients with SLN micrometastasis and macrometastasis(19.0%vs.4.5%,χ^(2)=12.771,P<0.001).Chi-square test showed that there were significant differences in SLN successful detection rates among patients with different vascular tumor embolism status(96.3%vs.90.8%,χ^(2)=9.013,P=0.003)and tumor(T)stages(96.6%vs.94.1%,χ^(2)=5.189,P=0.023).Multivariate analysis showed that vascular tumor embolism was the only independent factor for SLN successful detection(odds ratio:0.440,95%confidence interval:0.224-0.862,P=0.017).Survival analysis showed a significant difference in disease-free survival(DFS)between patients with non-SLN metastasis and patients without non-SLN metastasis(P=0.006).Conclusion:Our single-center data show that,as a commonly used tracer in SLNB in China,MBD has an acceptable SLN IR and a low FNR in frozen sections.This finding is consistent with reports of dual tracer-guided SLNB.Positive SLNs with non-SLN metastasis are associated with DFS.
文摘A novel polymeric dye of aqueous dispersion poly[urethane-(disperse blue 14)-urethane] was synthesized based on poly(propylene glycol) (PPG), 2, 4-tolylene diisocyanate (TDI), klimethylol propionic acid (DMPA), disperse blue 14 and triethylamine (TEA) depending on a modified acetone process. Fourier transform infrared spectroscopy (FTIR) was used to identify Lhe structure of the polymeric dye, indicating an obvious carbonyl stretching absorption in disperse blue 14. The polymer was also characterized by the analysis of DSC, TGA, WAXD and UV-Vis spectroscopy.
基金the Shanghai Key Subject (China P1501)Science Technology Foundation of Shanghai (064307054)Science Technology Foundation of Shanghai Universities (167)
文摘Reactive blue rare earth dyestuffs were prepared by using reactive blue and lanthanum oxide, praseodymium oxide, neodymium oxide, samarium oxide, europium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, erbium oxide, lutetium oxide and yttrium oxide respectively for dyeing silk cloth. The degrees of dyeing of reactive blue gadolinium and fixation of reactive blue neodymium were the biggest respectively, were 84.83% and 97.96 respectively, were 24.13% and 8.36% were increased with that of reactive blue respectively. The spectra of reactive blue rare earths and reactive blue were studied by UV-VIS. In 200.00～800.00 nm, the λmax of reactive blue, reactive blue lanthanum, reactive blue praseodymium, reactive blue neodymium, reactive blue samarium, reactive blue europium, reactive blue gadolinium, reactive blue terbium, reactive blue dysprosium, reactive blue erbium, reactive blue lutetium and reactive blue yttrium are 599.00, 600.00, 602.00, 601.00, 600.00, 600.50, 600.50, 601.00, 600.00, 600.50, 599.50 and 600.50 nm respectively. Reactive blue lanthanum, reactive blue praseodymium, reactive blue neodymium, reactive blue samarium, reactive blue europium, reactive blue gadolinium, reactive blue terbium, reactive blue dysprosium, reactive blue erbium, reactive blue lutetium, reactive blue yttrium and reactive blue had almost same color.
基金University of Burdwan was for instrumental and financial support from DST-FIST(SR/FST/ESI-141/2015,dt:30.09.2019)Govt.of India and WBDST-BOOST(39/WBBDC/1p-2/2013,dt:25.03.2015),Govt.of West Bengal.
文摘The objective in this study is to investigate the adsorption-degradation of the methylene blue(MB)dye using a fabricated heterojunction Ag@TiO_(2)nanocomposite.The batch factors used in photo catalytic reactions were pH,UV-irradiation time,temperature,catalytic dosage,and concentration of MB.The results showed that 0.2×10^(3) g·ml^(-1))of the catalytic dose caused the Ag@TiO_(2)adsorption to degrade by 96.67%with darks and UV exposure.Using the Langmuir-Hinshelwood model to determine the kinetic,the Ag@TiO_(2)displays a greater kinetic rate than TiO_(2)and silver nanoparticle(AgNPs).The photocatalytic degradation of MB,which is an endothermic reaction involving all catalysts,is shown by the thermodynamic parameter to have the positive value of enthalpy(ΔH°).The enthalpies observed were Ag@TiO_(2)(126.80 kJ·mol^(-1))<AgNPs(354.47 kJ·mol^(-1))<TiO_(2)(430.04 kJ·mol^(-1)).Ascorbic acid(·OH scavenger),2-propanol(·O_(2)scavenger),and ammonium oxalate(AO)(hole h+scavenger)were employed to conduct the scavenger effects.The Ag@TiO_(2)demonstrated a reduction in MB degradation when combined with 2-propanol,and this clearly demonstrated that,in contrast to hydroxyl radicals(·OH)and holeh scavengers,superoxide radical anion(O_(2)scavenger)plays a significant role in MB degradation.Utilizing density functional theory(DFT)to elucidate the mechanism and B3LYP/6-311+G(d,p)level optimization,the degradation-adsorption process was explained.When the N-N,C-N or C-C bonds were severed,the Fukui faction was demonstrated for nucleophilic,electrophilic,and radical attack.
基金support by the Natural Science Research Foundation of Jiangnan University(No.005796).
文摘Magnetic field was tentatively introduced into Fenton reactions system for the degradation and discoloration of methyl blue as the represent of organic chemical dye, which was a bio-refractory organic pollutant in industry wastewater. It was found that under optimal Fenton reaction conditions, with the assistant of magnetic field in Fenton reactions, the degradation rate of methyl blue, the decomposition rate of H2O2 and the conversion rate of Fe^2＋ were accelerated, the extent of them would be improved by the increase of magnetic field intensity. Meanwhile, the mineralization of methyl blue （CODer） was improved by over 10% with magnetic field.
基金financial supports from the Regional Council of South-Savo and the City of Mikkeli,Finland
文摘Synthesis of malachite@clay nanocomposite was successfully carried out for the removal of cationic（Methylene Blue,MB） and anionic dyes（Congo Red,CR） from synthetic wastewater.Nanocomposite was characterized by TEM,SEM,FT-IR,EDS analysis and zeta potential.TEM analysis indicated that the particle diameter of nanocomposite was in the range of 14 to23 nm.Various important parameters viz.contact time,concentration of dyes,nanocomposite dosage,temperature and solution pH were optimized to achieve maximum adsorption capacity.In the case of MB,removal decreased from 99.82%to 93.67%while for CR,removal decreased from 88.55%to 75.69%on increasing dye concentration from 100 to 450 mg/L.pH study confirmed the higher removal of CR in acidic range while MB removal was higher in alkaline range.Kinetic study revealed the applicability of pseudo-second-order model for the adsorption of both dyes.Negative values of AG0 for both systems suggested the feasibility of dye removal and support for spontaneous adsorption of CR and MB on nanocomposite.Nanocomposite showed 277.77 and 238.09 mg/g Langmuir adsorption capacity for MB and CR respectively.Desorption of dyes from the dye loaded nanocomposite was easily carried out with acetone.The results indicate that the prepared malachite@clay nanocomposite is an efficient adsorbent with high adsorption capacity for the aforementioned dyes.
基金financially supported by the National Natural Science Foundation of China(Nos.11875313,11605274,and 11575277)
文摘Ionizing radiation is a promising method for dye degradation or textile coloration using commercial azo dyes and small molecular weight organic dyes. Thus, the stability of the molecular structure of an azo dye is important under ionizing radiation. Disperse Blue 79, as an example azo dyes, was irradiated with gamma rays or electron beam (EB) to investigate the radiation-induced effects on the molecular structure. Ultraviolet visible spectroscopy (UV Vis), nuclear magnetic resonance (NMR) spectra analysis, and mass spectrometry (MS) studies indicated that acetoxy and methoxyl were easily cleaved on the irradiation of the aqueous dye solution but retained a stable structure on the irradiation of the powder form. Gamma rays and EB showed similar effects on the decomposition process. Chromaticity changes using the Lab* method showed that the dye turned to dark yellow and the value of b* of the irradiated dyes increased with the increasing absorbed dose, which indicated that Disperse Blue 79 could be partly decomposed in an aqueous solution This work was nancially supported by the National Natural Science Foundation of China (Nos. 11875313, 11605274, and 11575277). Xiao-Jun Ding and Ming Yu contributed equally to this work. & Jing-Ye Li jyli@shnu.edu.cn 1 Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800, China 2 University of Chinese Academy of Sciences, Beijing 100049, China 3 The Education Ministry Key Lab of Resource Chemistry, Shanghai Key Lab of Rare Earth Functional Materials, College of Chemistry and Materials Science, Shanghai Normal University, Shanghai 200234, China with an absorbed dose of 10 kGy. Furthermore, the results demonstrated that the chemical stability of the Disperse Blue 79 under ionizing radiation are different in its powder form with the dye in the aqueous solution.
文摘Aniline blue, one of the triphenylmethane dyes, is the most commonly produced and used of these dyes yet it is also the most dangerous and the most serious cause of pollution amongst them. An exploration of aniline blue degradation is likely to facilitate an understanding of the degradation mechanism for a range of related dyes. In this study, we managed to isolate a particular strain of microorganism, identified to be Lysinibacillus fusiformis N019a, which showed a significant capacity for aniline blue degradation in both laboratory tests and natural sewage treatment. In analysis aided by a UV-Visible spectrophotometer, we found that 96.7% of aniline blue had degraded within 24 hours under laboratory conditions. When treating natural sewage, 80.1% of the aniline blue was removed after just 16 hours. Further analysis has shown that Lysinibacillus fusiformis N019a has a strong resistance to Cu2+, Mn2+, Zn2+, and Pb2+. We also found that the degradation product of aniline blue by Lysinibacillus fusiformis N019a was of reduced toxicity to plants and microbes.
文摘The nanophotocatalytic process using semiconducting oxides with a nanostructure is one of the technologies used for the destructive oxidation of organic compounds such as dyes. The photocatalytic oxidation of a textile dye—C. I. Basic Blue 41 (BB41) in aqueous solution was assessed by UV ray irradiation in the presence of TiO2 nanoparticles. The effect of initial dye concentration, pH and TiO2 loading were investigated and the optimized conditions for maximum amount of degradation were determined. Analysis of the kinetics showed pseudo-first-order model. The mineralization of the dye was reported by measuring the initial and final chemical oxygen demand of the solution that was irradiated under optimized conditions.
文摘The best conditions for synthesis of starch hydroxypropyl sulphate as per the dry method were firstly established. This was done through a thorough investigation into factors affecting the synthesis including concentrations of both the NaOH catalyst and the 2-hydroxy-3-chloropropyl sulphate along with duration and temperature of the reaction. The resultant newly synthesized 2-hydroxy-3-chloropropyl sulphate was then reacted with starch to obtain starch hydroxypropyl sulphate ultimately. After being characterized by making use of IR spectroscopy analysis and scanning electronic microscope, the starch hydroxypropyl sulphate samples were submitted to evaluation for cationic dye removal using Methylene Blue (MB). Cationic dye removal was studied under a variety of conditions. Factors involved encompass initial dye concentration, duration, sulphur %, pH and adsorbent dose. 100% dye removal could be achieved under certain conditions which were described in the text.
文摘We have investigated third order nonlinear optical properties and spectral characteristics of methylene blue dye in both polymer and liquid mixtures. The spectral characteristics of the dye is studied by recording the absorption and fluorescence spectra of the dye doped in poly(methylmethacrylate) modified with additive n-butyl acetate(nBA) and the dye in MMA and nBA (liquid mixture). The spectral results of the dye doped polymer rod are compared with dye in liquid Mixture. The nonlinear measurements of the dye in liquid and polymer medium were performed using CW He-Ne laser of wavelength 632.8 nm by employing z-scan technique. The dye methylene blue showed a negative nonlinear refractive index.
基金Supported by the National Natural Science Foundation of China(U1608223,21576044,21421005,21536002)the Dalian University of Technology Innovation Team(DUT2016TB12)
文摘A systematic study of the synthesis of C.I.Acid Blue 9 leuco compound in water is reported.The kinetic analysis of experimental data for the condensation reaction between 2-formylbenzenesulfonic acid sodium and N-ethyl-N-(3'-sulfonic acid benzyl) aniline obtained at four different temperatures ranging between 85 and 100°C is discussed.It is shown that the reaction followed second-order rate kinetics.The overall rate constant(k) increased with the increase of temperature.On the basis of the value of k,activation energy(E_a) of the reaction was evaluated.Importantly,it is found that reactant concentration has great effect on the formation of C.I.Acid Blue 9 leuco compound,implying that it is not enough to improve the conversion of N-ethyl-N-(3'-sulfonic acid benzyl) aniline by only prolonging reaction time in the late period of the reaction.
