This work focuses on the development and implementation of a simulation-based approach for the detection of partial and extended blockages within an edible oil pipeline system. Blockages, whether partial or extended, ...This work focuses on the development and implementation of a simulation-based approach for the detection of partial and extended blockages within an edible oil pipeline system. Blockages, whether partial or extended, pose a significant operational and safety risks. This study employs computational fluid dynamics (CFD) simulations to model the flow behaviour of edible oil through pipeline under varying conditions. It leverages advanced computational fluid dynamics (CFD) simulations to analyze pressure, velocity, and temperature variations along the pipeline. By simulating scenarios with different blockage characteristics, there is establishment of distinctive patterns indicative of partial and extended obstructions. Through extensive analysis of simulation data, sensing element, and monitoring system, processing signal input and response output, the system can accurately pinpoint the location and severity of blockages, providing crucial insights for timely intervention. The detection system represents a significant advancement in pipeline monitoring technology, offering a proactive and accurate approach to identify blockages and mitigate potential risks and ensure the uninterrupted flow of edible oil, thereby enabling timely intervention and maintenance.展开更多
Sediment particles,as one of the key components of drip irrigation technology,significantly affect the service life of emitters and restrict the popularization of drip irrigation technology.Hence,two types of patch dr...Sediment particles,as one of the key components of drip irrigation technology,significantly affect the service life of emitters and restrict the popularization of drip irrigation technology.Hence,two types of patch drip irrigation emitters,focusing on the anti-clogging performance through the experiment,were investigated.The dynamic variations in the clogging characteristics of emitters,specifically were subjected to statistical analysis.The movement mechanism of emitter clogging and discharging sediment was studied.The effects of emitter structure and position factors on emitter clogging were analyzed.The results show that the pressure-compensated emitter exhibits superior anti-clogging perfor-mance,with a service life that is 227.8%greater than that of the labyrinth channel emitter.A single structural factor cannot completely evaluate the anti-clogging performance of emitters.All factors causing emitter clogging should be considered comprehensively.Emitters contain sensitive sediment prone to clogging,however,significant blockage occurs primarily when the sediment content is elevated.The discharge of sediment,denoted as V90,from the emitter is affected by the accumulative effect of clogged sediment.These results may offer valuable insights for the application and advancement of drip irrigation technology.展开更多
Drilling operations in carbonate rock heavy oil blocks(e.g.,in the Tahe Oilfield)are challenged by the intrusion of high-viscosity,temperature-sensitive formation heavy oil into the drilling fluid.This phenomenon ofte...Drilling operations in carbonate rock heavy oil blocks(e.g.,in the Tahe Oilfield)are challenged by the intrusion of high-viscosity,temperature-sensitive formation heavy oil into the drilling fluid.This phenomenon often results in wellbore blockage,reduced penetration rates,and compromised well control,thereby significantly limiting drilling efficiency and operational safety.To address this issue,this study conducts a comprehensive investigation into the mechanisms governing heavy oil invasion using a combination of laboratory experiments and field data analysis.Findings indicate that the reservoir exhibits strong heterogeneity and that the heavy oil possesses distinctive physical properties.The intrusion process is governed by multiple interrelated factors,including pressure differentials,pore structure,and the rheological behavior of the heavy oil.Experimental results reveal that the invasion of heavy oil occurs in distinct phases,with temperature playing a critical role in altering its viscosity.Specifically,as temperature increases,the apparent viscosity of the drilling fluid decreases;however,elevated pressures induce a nonlinear increase in viscosity.Furthermore,the compatibility between the drilling fluid and the intruding heavy oil declines markedly with increasing oil concentration,substantially raising the risk of wellbore obstruction.Simulation experiments further confirm that at temperatures exceeding 40℃and injection rates of L/min,the likelihood of wellbore blockage significantly≥0.4increases due to heavy oil infiltration.Based on these insights,a suite of targeted mitigation strategies is proposed.These include the formulation of specialized chemical additives,such as viscosity reducers,dispersants,and plugging removal agents,the real-time adjustment of drilling fluid density,and the implementation of advanced monitoring and early-warning systems.展开更多
Gas channeling in fractures during CO_(2) injection into the deep coal seam seriously reduces the CO_(2) storage efficiency after the development of coalbed methane.The generation and migration of coal fines causes bl...Gas channeling in fractures during CO_(2) injection into the deep coal seam seriously reduces the CO_(2) storage efficiency after the development of coalbed methane.The generation and migration of coal fines causes blockages in the fractures in the stage of drainage and gas production,reducing the gas channeling effect of injected CO_(2) caused by the heterogeneity of the coal seam.To explore the impact of coal fines within coal seam fractures on the efficacy of CO_(2) storage,experiments on the production stage and CO_(2) injection for storage were conducted on coal combinations containing propped fractures,fractures,and matrix.The CO_(2) storage characteristics of coal at the constraint of coal fines,as well as the influence of multiple rounds of intermittent CO_(2) injection and different injection parameters on the CO_(2) storage effect,were analyzed.The research results show that blockage by coal fines increases the resistance to fluid flow in the fractures by 71.2%.The CO_(2) storage capacity and storage potential of coal with coal fines are 6.5 cm^(3)/g and 8.8%higher than those of coal without coal fines,while the CO_(2) storage capacity of fractured coal under the influence of coal fines has the largest increase of 9.4 cm^(3)/g.The CO_(2) storage of coal containing coal fines is significantly higher(6.6%)than that of the coal without coal fines.The CO_(2) storage effect of the coal with coal fines is improved with the increase in injection rate,whereas the CO_(2) storage effect of the coal without coal fines decreases significantly(by 7.8%).Multiple rounds of intermittent injection increases the CO_(2) storage volume of coal by 20.4%(with coal fines)and 17.1%(without coal fines).The presence of coal fines in fractures also slows down the downward trend of CO_(2) storage fraction after multiple rounds of CO_(2) injection.The blockage in fractures significantly increases the CO_(2) injection time and difficulty,but can increase the CO_(2) storage fraction by 4.7%-17.1%,and the storage volume by 1.9%-14%,increasing the feasibility of CO_(2) storage in fractured coal seams that have previously been exploited for methane production.The multiple rounds of intermittent CO_(2) injection and shut-in periods has shown potential for greater CO_(2) storage and injection efficiency.展开更多
With the development of offshore oil and gas resources,hydrates pose a significant challenge to flow assurance.Hydrates can form,accumulate,and settle in pipelines,causing blockages,reducing transport capacity,and lea...With the development of offshore oil and gas resources,hydrates pose a significant challenge to flow assurance.Hydrates can form,accumulate,and settle in pipelines,causing blockages,reducing transport capacity,and leading to significant economic losses and fatalities.As oil and gas exploration moves deeper into the ocean,the issue of hydrate blockages has become more severe.It is essential to take adequate measures promptly to mitigate the hazards of hydrate blockages after they form.However,a prerequisite for effective mitigation is accurately detecting the location and amount of hydrate formation.This article summarizes the temperature–pressure,acoustic,electrical,instrumental–response,and flow characteristics of hydrate formation and blocking under various conditions.It also analyzes the principles,limitations,and applicability of various blockage detection methods,including acoustic,transient,and fiber-optic-based methods.Finally,it lists the results of field experiments and commercially used products.Given their advantages of accuracy and a wide detection range,acoustic pulse reflectometry and transient-based methods are considered effective for detecting hydrate blockages in future underwater pipelines.Using strict backpressure warnings combined with accurate detection via acoustic pulse reflectometry or transient-based methods,efficient and timely diagnosis of hydrate blockages can be achieved.The use of a hydrate model combined with fiber optics could prove to be an effective method for detecting blockages in newly laid pipelines in the future.展开更多
Past investigations of the hydrodynamic forces on vertical columns have generally been based on rigid structure assumptions.The effects of structural flexibility and geometry characteristics on the hydrodynamic force ...Past investigations of the hydrodynamic forces on vertical columns have generally been based on rigid structure assumptions.The effects of structural flexibility and geometry characteristics on the hydrodynamic force distribution are not well understood.In this study,fluid-structure interaction models are developed for numerical analyses.This modeling technique is verified with an experimental test in the literature using both circular and rectangular cross-sections.A series of material elasticities that present structural properties ranging from rigid to flexible is then used to conduct analyses.This finding indicates that an increase in structural flexibility can decrease the impact force to some extent,but this effect is limited.A concrete bridge pier with fluid flow impact can be considered rigid when it is fixed at the bottom.After that,the effects of the initial downstream water height and the width of water tank on the hydrodynamic force are thoroughly investigated.The results demonstrate that the increase in the downstream water height with a constant upstream water height corresponds to a decreased force.Moreover,the vertical column results in a blockage effect on the fluid flow.The greater the blockage effect,the higher the hydrodynamic force.The blockage effect from the vertical column can be neglected when the tank width is greater than eight times the structural cross-section diameter.展开更多
Polymer flooding is an important means of improving oil recovery and is widely used in Daqing,Xinjiang,and Shengli oilfields,China.Different from conventional injection media such as water and gas,viscoelastic polymer...Polymer flooding is an important means of improving oil recovery and is widely used in Daqing,Xinjiang,and Shengli oilfields,China.Different from conventional injection media such as water and gas,viscoelastic polymer solutions exhibit non-Newtonian and nonlinear flow behavior including shear thinning and shear thickening,polymer convection,diffusion,adsorption,retention,inaccessible pore volume,and reduced effective permeability.However,available well test model of polymer flooding wells generally simplifies these characteristics on pressure transient response,which may lead to inaccurate results.This work proposes a novel two-phase numerical well test model to better describe the polymer viscoelasticity and nonlinear flow behavior.Different influence factors that related to near-well blockage during polymer flooding process,including the degree of blockage(inner zone permeability),the extent of blockage(composite radius),and polymer flooding front radius are explored to investigate these impacts on bottom hole pressure responses.Results show that polymer viscoelasticity has a significant impact on the transitional flow segment of type curves,and the effects of near-well formation blockage and polymer concentration distribution on well test curves are very similar.Thus,to accurately interpret the degree of near-well blockage in injection wells,it is essential to first eliminate the influence of polymer viscoelasticity.Finally,a field case is comprehensively analyzed and discussed to illustrate the applicability of the proposed model.展开更多
This study addresses the issue of spray icing on the air intake grilles of ship power systems in cold maritime environments.Through numerical simulation methods,the influence of environmental parameters on icing chara...This study addresses the issue of spray icing on the air intake grilles of ship power systems in cold maritime environments.Through numerical simulation methods,the influence of environmental parameters on icing characteristics is revealed,and an energy-efficient zoned electric heating anti-icing strategy is proposed.A threedimensional grille model is constructed to systematically analyze the effects of environmental temperature(from−20℃to−4℃),droplet diameter(from 50μm to 500μm),and liquid water content(from 0.5 g/m³to 8 g/m³)on icing rates and blockage of the flow channel.The results indicate that low temperature and high liquid water content significantly exacerbate icing.Under the condition of an environmental temperature of−20℃,droplet diameter of 500μm,and liquid water content of 8 g/m³,the flow channel blockage ratio reaches 30.95%within 10 min.Additionally,as droplet diameter increases,the droplet impingement and icing regions become more concentrated toward the leading edge of blades.To mitigate grille icing in cold environments,an electric heating film configuration is employed for thermal protection.Optimization of the heating strategy reveals that the zoned heating approach,compared to the initial uniform heating scheme,effectively homogenizes surface temperature distribution while reducing total power consumption by 37.47%.This study validates the engineering applicability of the zoned electric heating anti/de-icing strategy,providing theoretical and technical support for the design of anti-icing systems in ship power systems operating in cold maritime regions.展开更多
Under the dual drivers of global energy transition and carbon neutrality objectives,submarine carbon sequestration technology has emerged as a critical strategy for balancing energy security and climate governance.Dep...Under the dual drivers of global energy transition and carbon neutrality objectives,submarine carbon sequestration technology has emerged as a critical strategy for balancing energy security and climate governance.Depleted natural gas hydrate(NGH)reservoirs in seabed sediments exhibit favorable temperature and pressure conditions for carbon dioxide(CO_(2))sequestration and hydrate formation.This study focuses on the thermodynamic and kinetic characteristics of phase transitions influenced by multiphase seepage,employing magnetic resonance imaging(MRI)technology to elucidate phase evolution patterns during CO_(2)sequestration and the role of hydrate phase transitions in porous media on seepage behavior.The findings indicate that residual NGH frameworks significantly enhance CO_(2)hydrate formation kinetics,exhibiting a top-down directional growth mode.However,progressive hydrate formation induces pore throat blockage,thereby constraining CO_(2)migration.The continued CO_(2)hydrate formation(consuming dissolved CO_(2))further intensifies this clogging phenomenon.At an NGH saturation(Si)of~15%,hydrate and CO_(2)occupied over 62%of the reservoir pore space,indicating exceptional carbon storage capacity.Furthermore,the nonlinear evolution of reservoir permeability provides theoretical support for establishing a CO_(2)sequestration-in situ hydrate energy synergistic system.These findings advance marine carbon sequestration technologies and provide a scientific foundation for achieving carbon-energy synergy regulation in NGH reservoirs under carbon neutrality goals.energy synergistic regulation in NGH reservoirs under carbon neutrality goals.展开更多
By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permea...By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permeability and heavy oil reservoirs under varying temperature conditions.The results demonstrate that this system effectively reduces oil–water interfacial tension,achieving an ultra-low interfacial tension state.The static oil washing efficiency of oil sands exceeds 85%,the average pressure reduction rate reaches 21.55%,and the oil recovery rate improves by 13.54%.These enhancements significantly increase the system’s ability to dissolve oilbased blockages,thereby lowering water injection pressure caused by organic fouling,increasing the injection volume of injection wells,and ultimately improving oil recovery efficiency.展开更多
Many wellbores are blocked by asphaltene deposits,which lead to production problems in the oilfield development process.In this paper,methods such as elemental analysis,and solvent extraction are adopted for the study...Many wellbores are blocked by asphaltene deposits,which lead to production problems in the oilfield development process.In this paper,methods such as elemental analysis,and solvent extraction are adopted for the study of wellbore blockages.The content of organic matter in blockages is higher than 96% and asphaltene is the main component of the organic matter with n-heptane asphaltene content of 38%.Based on the above analyses,an agent for asphaltene dispersion and removal（named as SDJ） was developed.The performance of the SDJ agent was evaluated,and it was found that the dissolution rate of asphaltene can reach 2.9 mg.mL-1.min-1 at 60 oC.SDJ agent（1wt%） was added to crude oil with a colloid instability index greater than 0.9 can effectively inhibit asphaltene deposition in the wellbore.By the viscosity method,the dissolution amount of SDJ agent was calculated,and it was found that when the viscosity of the system is around 2,000 mPa.s（the common viscosity of crude oil）,the amount of SDJ agent added to the blockage was at least 96 g per 100 g blockages.Therefore,SDJ agent has promising application for dispersion and removal of asphaltene deposition in high-asphaltene wells.展开更多
Sewer blockages are on the increase whilst water closet (WC) flush volumes are on the decrease. Furthermore, Water UK reported figures show that the actual number of properties affected by sewer flooding is on the ris...Sewer blockages are on the increase whilst water closet (WC) flush volumes are on the decrease. Furthermore, Water UK reported figures show that the actual number of properties affected by sewer flooding is on the rise. Sewer blockages can lead to sewer flooding of homes and collapse of sewers which impact negatively on social, economic and environmental factors, and therefore, they are not sustainable. Water conservation is required due to water stress but reduced water use results in less water to waste, which in turn reduces solids’ transfer in sewers. When considering reducing water usage through water conservation, these savings could be cancelled out by an increased population and the situation exacerbated by the impacts of climate change. There are issues in relation to varying design methods, a reliance on engineering judgement in sewer design, uncertainty relating to future water stress, and a lack of cross disciplinary design decision-making. Public health engineering solutions are needed to reduce the number of sewer blockages and the environmental impact of sewer flooding. This paper examines the fundamental research that have been carried out in the area of “solid transfer in sewers” resulting from “less water to waste” since the mid-20th Century. Contrary to existing literature, this paper identifies that, now more than ever, this type of research is needed to deal with the increased need for water conservation. To judge that solid transfer research is complete can be compared to supporting a statement that “water conservation is complete”.展开更多
The layout of houses and other buildings impacts the way in which foul sewer pipework is positioned internally and externally. Less water to waste through conservation measures reduces the distance that gross solids t...The layout of houses and other buildings impacts the way in which foul sewer pipework is positioned internally and externally. Less water to waste through conservation measures reduces the distance that gross solids transfer in sewers and increases the number of sewer blockages. Dwelling houses are often laid out where the solids from faecal flushes are at the head of the sewer line with other flows entering downstream. Discharges from appliances such as washing machines, dishwashers, baths, showers and kitchen/utility sinks are often not utilised in the transfer of the gross solids when they enter downstream of the faecal flushes. At present, no recommendations or specific design guidance exist regarding the design of internal building layouts relating to sewer configuration requirements. Furthermore, to date, no specific research exists which examines pipeline configuration scenarios outside buildings in terms of the link between multiple grey water discharge points and solid transfer in a sewer system. The aim of this study was to investigate sewer layout at houses in terms of maximising greywater flow in relation to solid transfer. This study showed that smart sewers are needed which utilise all the foul water leaving a building as it was found that up to 100% of greywater in some instances is completely missed out in terms of solid transfer. Consequently, optimal sewer design is far from being realised and internal building layouts should be designed with consideration of the faecal flushes and greywater flows.展开更多
Nanoparticles have already gained attentions for their countless potential applications in enhanced oil recovery.Nano-sized particles would help to recover trapped oil by several mechanisms including interfacial tensi...Nanoparticles have already gained attentions for their countless potential applications in enhanced oil recovery.Nano-sized particles would help to recover trapped oil by several mechanisms including interfacial tension reduction, impulsive emulsion formation and wettability alteration of porous media. The presence of dispersed nanoparticles in injected fluids would enhance the recovery process through their movement towards oil–water interface. This would cause the interfacial tension to be reduced. In this research, the effects of different types of nanoparticles and different nanoparticle concentrations on EOR processes were investigated. Different flooding experiments were investigated to reveal enhancing oil recovery mechanisms. The results showed that nanoparticles have the ability to reduce the IFT as well as contact angle, making the solid surface to more water wet. As nanoparticle concentration increases more trapped oil was produced mainly due to wettability alteration to water wet and IFT reduction. However, pore blockage was also observed due to adsorption of nanoparticles, a phenomenon which caused the injection pressure to increase. Nonetheless, such higher injection pressure could displace some trapped oil in the small pore channels out of the model. The investigated results gave a clear indication that the EOR potential of nanoparticle fluid is significant.展开更多
In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pr...In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribution measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators （VGs） is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate： （1） Compared with the baseline serpentine design without flow control, the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion （-↑△σ0） decreases from 11.7% to 2.3% by using the VGs. （2） With the descent of the free stream Mach number the total pressure loss decreases. However, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. （3） When Mao = 0.6-0.8, a = -4°-8° and β = 0°-6°, the total pressure recovery varies between 0.936 and 0. 961, the circular total pressure distortion coefficient varies between 1.4 % and 5.4 % and the synthesis distortion coefficient has a ranges from 3.8 % to 7.0 %. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.展开更多
The natural gas pipeline from Platform QKI8-1 in the southwest of Bohai Bay to the onshore processing facility is a subsea wet gas pipeline exposed to high pressure and low temperature for a long distance. Blockages i...The natural gas pipeline from Platform QKI8-1 in the southwest of Bohai Bay to the onshore processing facility is a subsea wet gas pipeline exposed to high pressure and low temperature for a long distance. Blockages in the pipeline occur occasionally. To maintain the natural gas flow in the pipeline, we proposed a method for analyzing blockages and ascribed them to the hydrate formation and agglomeration. A new high-pressure flow loop was developed to investigate hydrate plug formation and hydrate particle size, using a mixture of diesel oil, water, and natural gas as experimental fluids. The influences of pressure and initial flow rate were also studied. Experimental results indicated that when the flow rate was below 850 kg/h, gas hydrates would form and then plug the pipeline, even at a low water content （10%） of a water/oil emulsion. Furthermore, some practical suggestions were made for daily management of the subsea pipeline.展开更多
An experimental study is made to investigate the film cooling performance of imperfect holes due to in-hole blockage over a flat plate. A specifically pyramid-shaped element is used to simulate the in-hole blockage. S...An experimental study is made to investigate the film cooling performance of imperfect holes due to in-hole blockage over a flat plate. A specifically pyramid-shaped element is used to simulate the in-hole blockage. Six in-hole blockage orientations（such as leading-inlet, leading-middle,leading-exit, trailing-inlet, trailing-middle and trailing-exit） and four blocking ratios（ranging from 0.1 to 0.4） are taken into considerations. Based on the experimental results, the influences of in-hole blockage on the film cooling effectiveness and discharge coefficient under typical blowing ratios are analyzed. It is confirmed that the in-hole blockage results in a reduction of discharge coefficient related to the perfect film cooling holes, especially for the leading-exit and trailing-inlet orientations with a big blocking ratio. However, in the view of film cooling effectiveness, the in-hole blockage shows complicated affecting roles. In general, except for the leading-exit orientation, the in-hole blockages produce detrimental influence on the film cooling effectiveness.展开更多
The role of adjuvant hormonal therapy and optimized regimens for high-risk localized prostate cancer after radical prostatectomy remains controversial. Herein, the clinical trial CU 1005 prospectively evaluated two re...The role of adjuvant hormonal therapy and optimized regimens for high-risk localized prostate cancer after radical prostatectomy remains controversial. Herein, the clinical trial CU 1005 prospectively evaluated two regimens of maximum androgen blockage or bicalutamide 150 mg daily as immediate adjuvant therapy for high-risk localized prostate cancer. Overall, 209 consecutive patients were recruited in this study, 107 of whom received 9 months of adjuvant maximum androgen blockage, whereas 102 received 9 months of adjuvant bicalutamide 150 mg. The median postoperative follow-up time was 27.0 months. The primary endpoint was biochemical recurrence. Of the 209 patients, 59 patients developed biochemical recurrence. There was no difference between the two groups with respect to clinical characteristics, including age, pretreatment prostate-specific antigen, Gleason score, surgical margin status, or pathological stages. The maximum androgen blockage group experienced longer biochemical recurrence-free survival （P = 0.004） compared with the bicalutamide 150 mg group. Side-effects in the two groups were similar and could be moderately tolerated in all patients. In conclusion, immediate, 9-month maximum androgen blockage should be considered as an alternative to bicalutamide 150 mg as adjuvant treatment for high-risk localized prostate cancer patients after radical prostatectomy.展开更多
Loose deposits, rainfall and topography are three key factors that triggering debris flows.However, few studies have investigated the effects of loose deposits on the whole debris flow process.On June 28, 2012, a cata...Loose deposits, rainfall and topography are three key factors that triggering debris flows.However, few studies have investigated the effects of loose deposits on the whole debris flow process.On June 28, 2012, a catastrophic debris flow occurred in the Aizi Valley, resulting in 40 deaths.The Aizi Valley is located in the Lower Jinsha River,southwestern Sichuan Province, China. The Aizi Valley debris flow has been selected as a case for addressing loose deposits effects on the whole debris flow process through remote sensing, field investigation and field experiments. Remote sensing interpretation and laboratory experiments were used to obtain the distribution and characteristics of the loose deposits, respectively. A field experiment was conducted to explore the mechanics of slope debris flows, and another field investigation was conducted to obtain the processes of debris flow formation, movement and amplification. The results showed that loose deposits preparation, slope debris flow initiation,gully debris flow confluence and valley debris flow amplification were dominated by the loose deposits.Antecedent droughts and earthquake activities may have increased the potential for loose soil sources in the Aizi Valley, which laid the foundation for debris flow formation. Slope debris flow initiated under rainfall, and the increase in the water content as well as the pore water pressure of the loose deposits were the key factors affecting slope failure. The nine gully debris flows converged in the valley, and the peak discharge was amplified 3.3 times due to a blockage and outburst caused by a large boulder. The results may help in predicting and assessing regional debris flows in dry-hot and seismic-prone areas based on loose deposits, especially considering large boulders.展开更多
A remote-control tether-less isolation tool is a mechanical device that is normally used in pipelines to block the flow at a given position by transforming a blocking module. In this study, the interactions between th...A remote-control tether-less isolation tool is a mechanical device that is normally used in pipelines to block the flow at a given position by transforming a blocking module. In this study, the interactions between the fluid and the plug module of the isolation tool were investigated. Simulations of the plug process and particle image velocimetry measurements were performed to study the flow characteristics. Numerical solutions for the continuity, momentum, and energy equations were obtained by using commercial software based on finite-volume techniques. Box–Behnken design was applied, and response surface methodology（RSM）-based CFD simulation analysis was conducted. The dynamic model in the plug process was built by RSM and used to evaluate the influences of the main mechanical parameters on the pressure during the plug process. The diameter of the isolation tool and the diameter of the plug module have strong influences on the process, and the length of the isolation tool has only a little influence on the plug process.展开更多
文摘This work focuses on the development and implementation of a simulation-based approach for the detection of partial and extended blockages within an edible oil pipeline system. Blockages, whether partial or extended, pose a significant operational and safety risks. This study employs computational fluid dynamics (CFD) simulations to model the flow behaviour of edible oil through pipeline under varying conditions. It leverages advanced computational fluid dynamics (CFD) simulations to analyze pressure, velocity, and temperature variations along the pipeline. By simulating scenarios with different blockage characteristics, there is establishment of distinctive patterns indicative of partial and extended obstructions. Through extensive analysis of simulation data, sensing element, and monitoring system, processing signal input and response output, the system can accurately pinpoint the location and severity of blockages, providing crucial insights for timely intervention. The detection system represents a significant advancement in pipeline monitoring technology, offering a proactive and accurate approach to identify blockages and mitigate potential risks and ensure the uninterrupted flow of edible oil, thereby enabling timely intervention and maintenance.
基金National Natural Science Foundation of China(52269011,52469008)。
文摘Sediment particles,as one of the key components of drip irrigation technology,significantly affect the service life of emitters and restrict the popularization of drip irrigation technology.Hence,two types of patch drip irrigation emitters,focusing on the anti-clogging performance through the experiment,were investigated.The dynamic variations in the clogging characteristics of emitters,specifically were subjected to statistical analysis.The movement mechanism of emitter clogging and discharging sediment was studied.The effects of emitter structure and position factors on emitter clogging were analyzed.The results show that the pressure-compensated emitter exhibits superior anti-clogging perfor-mance,with a service life that is 227.8%greater than that of the labyrinth channel emitter.A single structural factor cannot completely evaluate the anti-clogging performance of emitters.All factors causing emitter clogging should be considered comprehensively.Emitters contain sensitive sediment prone to clogging,however,significant blockage occurs primarily when the sediment content is elevated.The discharge of sediment,denoted as V90,from the emitter is affected by the accumulative effect of clogged sediment.These results may offer valuable insights for the application and advancement of drip irrigation technology.
基金Hubei Key Laboratory of Oil and Gas Drilling and Production Engineering(Yangtze University),China(Grant No.YQZC202415)Hubei Province Science and Technology Plan Project(Key R&D Special Project),China(Grant No.2023BCB070)+2 种基金Key R&D Program Project in Xinjiang,China,Grant No.2022B01042Guiding Project of Scientific Research Program of Education Department of Hubei Province,China(Grant No.B2023024)Open Fund of National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation(Southwest Petroleum University),Grant No.PLN2023-03.
文摘Drilling operations in carbonate rock heavy oil blocks(e.g.,in the Tahe Oilfield)are challenged by the intrusion of high-viscosity,temperature-sensitive formation heavy oil into the drilling fluid.This phenomenon often results in wellbore blockage,reduced penetration rates,and compromised well control,thereby significantly limiting drilling efficiency and operational safety.To address this issue,this study conducts a comprehensive investigation into the mechanisms governing heavy oil invasion using a combination of laboratory experiments and field data analysis.Findings indicate that the reservoir exhibits strong heterogeneity and that the heavy oil possesses distinctive physical properties.The intrusion process is governed by multiple interrelated factors,including pressure differentials,pore structure,and the rheological behavior of the heavy oil.Experimental results reveal that the invasion of heavy oil occurs in distinct phases,with temperature playing a critical role in altering its viscosity.Specifically,as temperature increases,the apparent viscosity of the drilling fluid decreases;however,elevated pressures induce a nonlinear increase in viscosity.Furthermore,the compatibility between the drilling fluid and the intruding heavy oil declines markedly with increasing oil concentration,substantially raising the risk of wellbore obstruction.Simulation experiments further confirm that at temperatures exceeding 40℃and injection rates of L/min,the likelihood of wellbore blockage significantly≥0.4increases due to heavy oil infiltration.Based on these insights,a suite of targeted mitigation strategies is proposed.These include the formulation of specialized chemical additives,such as viscosity reducers,dispersants,and plugging removal agents,the real-time adjustment of drilling fluid density,and the implementation of advanced monitoring and early-warning systems.
基金supported by National Natural Science Foundation of China(52104048,42272198)。
文摘Gas channeling in fractures during CO_(2) injection into the deep coal seam seriously reduces the CO_(2) storage efficiency after the development of coalbed methane.The generation and migration of coal fines causes blockages in the fractures in the stage of drainage and gas production,reducing the gas channeling effect of injected CO_(2) caused by the heterogeneity of the coal seam.To explore the impact of coal fines within coal seam fractures on the efficacy of CO_(2) storage,experiments on the production stage and CO_(2) injection for storage were conducted on coal combinations containing propped fractures,fractures,and matrix.The CO_(2) storage characteristics of coal at the constraint of coal fines,as well as the influence of multiple rounds of intermittent CO_(2) injection and different injection parameters on the CO_(2) storage effect,were analyzed.The research results show that blockage by coal fines increases the resistance to fluid flow in the fractures by 71.2%.The CO_(2) storage capacity and storage potential of coal with coal fines are 6.5 cm^(3)/g and 8.8%higher than those of coal without coal fines,while the CO_(2) storage capacity of fractured coal under the influence of coal fines has the largest increase of 9.4 cm^(3)/g.The CO_(2) storage of coal containing coal fines is significantly higher(6.6%)than that of the coal without coal fines.The CO_(2) storage effect of the coal with coal fines is improved with the increase in injection rate,whereas the CO_(2) storage effect of the coal without coal fines decreases significantly(by 7.8%).Multiple rounds of intermittent injection increases the CO_(2) storage volume of coal by 20.4%(with coal fines)and 17.1%(without coal fines).The presence of coal fines in fractures also slows down the downward trend of CO_(2) storage fraction after multiple rounds of CO_(2) injection.The blockage in fractures significantly increases the CO_(2) injection time and difficulty,but can increase the CO_(2) storage fraction by 4.7%-17.1%,and the storage volume by 1.9%-14%,increasing the feasibility of CO_(2) storage in fractured coal seams that have previously been exploited for methane production.The multiple rounds of intermittent CO_(2) injection and shut-in periods has shown potential for greater CO_(2) storage and injection efficiency.
基金supported by the National Natural Science Foundation of China(52476058,U21B2065,52006024,and 52306188)the National Key Research and Development(2022YFC2806200).
文摘With the development of offshore oil and gas resources,hydrates pose a significant challenge to flow assurance.Hydrates can form,accumulate,and settle in pipelines,causing blockages,reducing transport capacity,and leading to significant economic losses and fatalities.As oil and gas exploration moves deeper into the ocean,the issue of hydrate blockages has become more severe.It is essential to take adequate measures promptly to mitigate the hazards of hydrate blockages after they form.However,a prerequisite for effective mitigation is accurately detecting the location and amount of hydrate formation.This article summarizes the temperature–pressure,acoustic,electrical,instrumental–response,and flow characteristics of hydrate formation and blocking under various conditions.It also analyzes the principles,limitations,and applicability of various blockage detection methods,including acoustic,transient,and fiber-optic-based methods.Finally,it lists the results of field experiments and commercially used products.Given their advantages of accuracy and a wide detection range,acoustic pulse reflectometry and transient-based methods are considered effective for detecting hydrate blockages in future underwater pipelines.Using strict backpressure warnings combined with accurate detection via acoustic pulse reflectometry or transient-based methods,efficient and timely diagnosis of hydrate blockages can be achieved.The use of a hydrate model combined with fiber optics could prove to be an effective method for detecting blockages in newly laid pipelines in the future.
基金The National Natural Science Foundation of China(No.52222804,U21A20154).
文摘Past investigations of the hydrodynamic forces on vertical columns have generally been based on rigid structure assumptions.The effects of structural flexibility and geometry characteristics on the hydrodynamic force distribution are not well understood.In this study,fluid-structure interaction models are developed for numerical analyses.This modeling technique is verified with an experimental test in the literature using both circular and rectangular cross-sections.A series of material elasticities that present structural properties ranging from rigid to flexible is then used to conduct analyses.This finding indicates that an increase in structural flexibility can decrease the impact force to some extent,but this effect is limited.A concrete bridge pier with fluid flow impact can be considered rigid when it is fixed at the bottom.After that,the effects of the initial downstream water height and the width of water tank on the hydrodynamic force are thoroughly investigated.The results demonstrate that the increase in the downstream water height with a constant upstream water height corresponds to a decreased force.Moreover,the vertical column results in a blockage effect on the fluid flow.The greater the blockage effect,the higher the hydrodynamic force.The blockage effect from the vertical column can be neglected when the tank width is greater than eight times the structural cross-section diameter.
基金supported by the National Natural Science Foundation of China(52104049)the Young Elite Scientist Sponsorship Program by Beijing Association for Science and Technology(BYESS2023262)。
文摘Polymer flooding is an important means of improving oil recovery and is widely used in Daqing,Xinjiang,and Shengli oilfields,China.Different from conventional injection media such as water and gas,viscoelastic polymer solutions exhibit non-Newtonian and nonlinear flow behavior including shear thinning and shear thickening,polymer convection,diffusion,adsorption,retention,inaccessible pore volume,and reduced effective permeability.However,available well test model of polymer flooding wells generally simplifies these characteristics on pressure transient response,which may lead to inaccurate results.This work proposes a novel two-phase numerical well test model to better describe the polymer viscoelasticity and nonlinear flow behavior.Different influence factors that related to near-well blockage during polymer flooding process,including the degree of blockage(inner zone permeability),the extent of blockage(composite radius),and polymer flooding front radius are explored to investigate these impacts on bottom hole pressure responses.Results show that polymer viscoelasticity has a significant impact on the transitional flow segment of type curves,and the effects of near-well formation blockage and polymer concentration distribution on well test curves are very similar.Thus,to accurately interpret the degree of near-well blockage in injection wells,it is essential to first eliminate the influence of polymer viscoelasticity.Finally,a field case is comprehensively analyzed and discussed to illustrate the applicability of the proposed model.
基金supported in part by the Ship Preliminary Research Project (No.3020401020102)。
文摘This study addresses the issue of spray icing on the air intake grilles of ship power systems in cold maritime environments.Through numerical simulation methods,the influence of environmental parameters on icing characteristics is revealed,and an energy-efficient zoned electric heating anti-icing strategy is proposed.A threedimensional grille model is constructed to systematically analyze the effects of environmental temperature(from−20℃to−4℃),droplet diameter(from 50μm to 500μm),and liquid water content(from 0.5 g/m³to 8 g/m³)on icing rates and blockage of the flow channel.The results indicate that low temperature and high liquid water content significantly exacerbate icing.Under the condition of an environmental temperature of−20℃,droplet diameter of 500μm,and liquid water content of 8 g/m³,the flow channel blockage ratio reaches 30.95%within 10 min.Additionally,as droplet diameter increases,the droplet impingement and icing regions become more concentrated toward the leading edge of blades.To mitigate grille icing in cold environments,an electric heating film configuration is employed for thermal protection.Optimization of the heating strategy reveals that the zoned heating approach,compared to the initial uniform heating scheme,effectively homogenizes surface temperature distribution while reducing total power consumption by 37.47%.This study validates the engineering applicability of the zoned electric heating anti/de-icing strategy,providing theoretical and technical support for the design of anti-icing systems in ship power systems operating in cold maritime regions.
基金financially supported by the National Natural Science Foundation of China(52206076)the Ph.D.Programs Foundation of Liaoning(2023-BS-060),Dalian Science and Technology Innovation Fund(2023JJ11CG010)。
文摘Under the dual drivers of global energy transition and carbon neutrality objectives,submarine carbon sequestration technology has emerged as a critical strategy for balancing energy security and climate governance.Depleted natural gas hydrate(NGH)reservoirs in seabed sediments exhibit favorable temperature and pressure conditions for carbon dioxide(CO_(2))sequestration and hydrate formation.This study focuses on the thermodynamic and kinetic characteristics of phase transitions influenced by multiphase seepage,employing magnetic resonance imaging(MRI)technology to elucidate phase evolution patterns during CO_(2)sequestration and the role of hydrate phase transitions in porous media on seepage behavior.The findings indicate that residual NGH frameworks significantly enhance CO_(2)hydrate formation kinetics,exhibiting a top-down directional growth mode.However,progressive hydrate formation induces pore throat blockage,thereby constraining CO_(2)migration.The continued CO_(2)hydrate formation(consuming dissolved CO_(2))further intensifies this clogging phenomenon.At an NGH saturation(Si)of~15%,hydrate and CO_(2)occupied over 62%of the reservoir pore space,indicating exceptional carbon storage capacity.Furthermore,the nonlinear evolution of reservoir permeability provides theoretical support for establishing a CO_(2)sequestration-in situ hydrate energy synergistic system.These findings advance marine carbon sequestration technologies and provide a scientific foundation for achieving carbon-energy synergy regulation in NGH reservoirs under carbon neutrality goals.energy synergistic regulation in NGH reservoirs under carbon neutrality goals.
文摘By investigating the performance characteristics of the bio-based surfactant 8901A,a composite decontamination and injection system was developed using 8901A as the primary agent,tailored for application in low-permeability and heavy oil reservoirs under varying temperature conditions.The results demonstrate that this system effectively reduces oil–water interfacial tension,achieving an ultra-low interfacial tension state.The static oil washing efficiency of oil sands exceeds 85%,the average pressure reduction rate reaches 21.55%,and the oil recovery rate improves by 13.54%.These enhancements significantly increase the system’s ability to dissolve oilbased blockages,thereby lowering water injection pressure caused by organic fouling,increasing the injection volume of injection wells,and ultimately improving oil recovery efficiency.
基金the National High Technology Research and Development Program of China (No.SS2013AA060801)National Natural Science Foundation of China (No.51274210)12th National Science and Technology Major Project of Ministry of Science and Technology of China (No. 20112X05049-003-001-002)for financial support
文摘Many wellbores are blocked by asphaltene deposits,which lead to production problems in the oilfield development process.In this paper,methods such as elemental analysis,and solvent extraction are adopted for the study of wellbore blockages.The content of organic matter in blockages is higher than 96% and asphaltene is the main component of the organic matter with n-heptane asphaltene content of 38%.Based on the above analyses,an agent for asphaltene dispersion and removal（named as SDJ） was developed.The performance of the SDJ agent was evaluated,and it was found that the dissolution rate of asphaltene can reach 2.9 mg.mL-1.min-1 at 60 oC.SDJ agent（1wt%） was added to crude oil with a colloid instability index greater than 0.9 can effectively inhibit asphaltene deposition in the wellbore.By the viscosity method,the dissolution amount of SDJ agent was calculated,and it was found that when the viscosity of the system is around 2,000 mPa.s（the common viscosity of crude oil）,the amount of SDJ agent added to the blockage was at least 96 g per 100 g blockages.Therefore,SDJ agent has promising application for dispersion and removal of asphaltene deposition in high-asphaltene wells.
文摘Sewer blockages are on the increase whilst water closet (WC) flush volumes are on the decrease. Furthermore, Water UK reported figures show that the actual number of properties affected by sewer flooding is on the rise. Sewer blockages can lead to sewer flooding of homes and collapse of sewers which impact negatively on social, economic and environmental factors, and therefore, they are not sustainable. Water conservation is required due to water stress but reduced water use results in less water to waste, which in turn reduces solids’ transfer in sewers. When considering reducing water usage through water conservation, these savings could be cancelled out by an increased population and the situation exacerbated by the impacts of climate change. There are issues in relation to varying design methods, a reliance on engineering judgement in sewer design, uncertainty relating to future water stress, and a lack of cross disciplinary design decision-making. Public health engineering solutions are needed to reduce the number of sewer blockages and the environmental impact of sewer flooding. This paper examines the fundamental research that have been carried out in the area of “solid transfer in sewers” resulting from “less water to waste” since the mid-20th Century. Contrary to existing literature, this paper identifies that, now more than ever, this type of research is needed to deal with the increased need for water conservation. To judge that solid transfer research is complete can be compared to supporting a statement that “water conservation is complete”.
文摘The layout of houses and other buildings impacts the way in which foul sewer pipework is positioned internally and externally. Less water to waste through conservation measures reduces the distance that gross solids transfer in sewers and increases the number of sewer blockages. Dwelling houses are often laid out where the solids from faecal flushes are at the head of the sewer line with other flows entering downstream. Discharges from appliances such as washing machines, dishwashers, baths, showers and kitchen/utility sinks are often not utilised in the transfer of the gross solids when they enter downstream of the faecal flushes. At present, no recommendations or specific design guidance exist regarding the design of internal building layouts relating to sewer configuration requirements. Furthermore, to date, no specific research exists which examines pipeline configuration scenarios outside buildings in terms of the link between multiple grey water discharge points and solid transfer in a sewer system. The aim of this study was to investigate sewer layout at houses in terms of maximising greywater flow in relation to solid transfer. This study showed that smart sewers are needed which utilise all the foul water leaving a building as it was found that up to 100% of greywater in some instances is completely missed out in terms of solid transfer. Consequently, optimal sewer design is far from being realised and internal building layouts should be designed with consideration of the faecal flushes and greywater flows.
文摘Nanoparticles have already gained attentions for their countless potential applications in enhanced oil recovery.Nano-sized particles would help to recover trapped oil by several mechanisms including interfacial tension reduction, impulsive emulsion formation and wettability alteration of porous media. The presence of dispersed nanoparticles in injected fluids would enhance the recovery process through their movement towards oil–water interface. This would cause the interfacial tension to be reduced. In this research, the effects of different types of nanoparticles and different nanoparticle concentrations on EOR processes were investigated. Different flooding experiments were investigated to reveal enhancing oil recovery mechanisms. The results showed that nanoparticles have the ability to reduce the IFT as well as contact angle, making the solid surface to more water wet. As nanoparticle concentration increases more trapped oil was produced mainly due to wettability alteration to water wet and IFT reduction. However, pore blockage was also observed due to adsorption of nanoparticles, a phenomenon which caused the injection pressure to increase. Nonetheless, such higher injection pressure could displace some trapped oil in the small pore channels out of the model. The investigated results gave a clear indication that the EOR potential of nanoparticle fluid is significant.
文摘In order to provide the line-of-sight blockage of the engine face for an advanced Uninhabited Combat Air Vehicle（UCAV）, a highly curved serpentine inlet is proposed and experimentally studied. Based on the static pressure distribution measurement along the wall, the flow separation is found at the top wall of the second S duct for the baseline inlet design, which yields a high flow distortion at the exit plane. To improve the flow uniformity, a single array of vortex generators （VGs） is employed within the inlet. In this experimental study, the effects of mass flow ratio, free stream Mach number, angle of attack and yaw on the performance of a serpentine inlet instrumented with VGs are obtained. Results indicate： （1） Compared with the baseline serpentine design without flow control, the application of the VGs promotes the mixing of core flow and the low momentum flow in the boundary layer and thus prevents the flow separation. Under the design condition, the exit flow distortion （-↑△σ0） decreases from 11.7% to 2.3% by using the VGs. （2） With the descent of the free stream Mach number the total pressure loss decreases. However, the circular total pressure distortion increases. When the angle of attack rises from - 4° to 8°, the total pressure recovery and the circular total pressure distortion both go down. In addition, with the increase of yaw the total pressure recovery is fairly constant, while the circular total pressure distortion ascends gradually. （3） When Mao = 0.6-0.8, a = -4°-8° and β = 0°-6°, the total pressure recovery varies between 0.936 and 0. 961, the circular total pressure distortion coefficient varies between 1.4 % and 5.4 % and the synthesis distortion coefficient has a ranges from 3.8 % to 7.0 %. The experimental results confirm the excellent performance of the newly designed serpentine inlet incorporating VGs.
基金support from Subtopics of National Science and Technology Major Project(2011ZX05026-004-03)the National Natural Science Foundation of China (51104167)
文摘The natural gas pipeline from Platform QKI8-1 in the southwest of Bohai Bay to the onshore processing facility is a subsea wet gas pipeline exposed to high pressure and low temperature for a long distance. Blockages in the pipeline occur occasionally. To maintain the natural gas flow in the pipeline, we proposed a method for analyzing blockages and ascribed them to the hydrate formation and agglomeration. A new high-pressure flow loop was developed to investigate hydrate plug formation and hydrate particle size, using a mixture of diesel oil, water, and natural gas as experimental fluids. The influences of pressure and initial flow rate were also studied. Experimental results indicated that when the flow rate was below 850 kg/h, gas hydrates would form and then plug the pipeline, even at a low water content （10%） of a water/oil emulsion. Furthermore, some practical suggestions were made for daily management of the subsea pipeline.
基金the financial support for this project from the National Natural Science Foundation of China (Nos.51276090 and U1508212)
文摘An experimental study is made to investigate the film cooling performance of imperfect holes due to in-hole blockage over a flat plate. A specifically pyramid-shaped element is used to simulate the in-hole blockage. Six in-hole blockage orientations（such as leading-inlet, leading-middle,leading-exit, trailing-inlet, trailing-middle and trailing-exit） and four blocking ratios（ranging from 0.1 to 0.4） are taken into considerations. Based on the experimental results, the influences of in-hole blockage on the film cooling effectiveness and discharge coefficient under typical blowing ratios are analyzed. It is confirmed that the in-hole blockage results in a reduction of discharge coefficient related to the perfect film cooling holes, especially for the leading-exit and trailing-inlet orientations with a big blocking ratio. However, in the view of film cooling effectiveness, the in-hole blockage shows complicated affecting roles. In general, except for the leading-exit orientation, the in-hole blockages produce detrimental influence on the film cooling effectiveness.
文摘The role of adjuvant hormonal therapy and optimized regimens for high-risk localized prostate cancer after radical prostatectomy remains controversial. Herein, the clinical trial CU 1005 prospectively evaluated two regimens of maximum androgen blockage or bicalutamide 150 mg daily as immediate adjuvant therapy for high-risk localized prostate cancer. Overall, 209 consecutive patients were recruited in this study, 107 of whom received 9 months of adjuvant maximum androgen blockage, whereas 102 received 9 months of adjuvant bicalutamide 150 mg. The median postoperative follow-up time was 27.0 months. The primary endpoint was biochemical recurrence. Of the 209 patients, 59 patients developed biochemical recurrence. There was no difference between the two groups with respect to clinical characteristics, including age, pretreatment prostate-specific antigen, Gleason score, surgical margin status, or pathological stages. The maximum androgen blockage group experienced longer biochemical recurrence-free survival （P = 0.004） compared with the bicalutamide 150 mg group. Side-effects in the two groups were similar and could be moderately tolerated in all patients. In conclusion, immediate, 9-month maximum androgen blockage should be considered as an alternative to bicalutamide 150 mg as adjuvant treatment for high-risk localized prostate cancer patients after radical prostatectomy.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41861134008 and 41601476)the National Key Research and Development Program of China (Grant No. 2018YFC1505202)the 135 Strategic Program of the IMHE, CAS (Grant No. SDS-1351705)
文摘Loose deposits, rainfall and topography are three key factors that triggering debris flows.However, few studies have investigated the effects of loose deposits on the whole debris flow process.On June 28, 2012, a catastrophic debris flow occurred in the Aizi Valley, resulting in 40 deaths.The Aizi Valley is located in the Lower Jinsha River,southwestern Sichuan Province, China. The Aizi Valley debris flow has been selected as a case for addressing loose deposits effects on the whole debris flow process through remote sensing, field investigation and field experiments. Remote sensing interpretation and laboratory experiments were used to obtain the distribution and characteristics of the loose deposits, respectively. A field experiment was conducted to explore the mechanics of slope debris flows, and another field investigation was conducted to obtain the processes of debris flow formation, movement and amplification. The results showed that loose deposits preparation, slope debris flow initiation,gully debris flow confluence and valley debris flow amplification were dominated by the loose deposits.Antecedent droughts and earthquake activities may have increased the potential for loose soil sources in the Aizi Valley, which laid the foundation for debris flow formation. Slope debris flow initiated under rainfall, and the increase in the water content as well as the pore water pressure of the loose deposits were the key factors affecting slope failure. The nine gully debris flows converged in the valley, and the peak discharge was amplified 3.3 times due to a blockage and outburst caused by a large boulder. The results may help in predicting and assessing regional debris flows in dry-hot and seismic-prone areas based on loose deposits, especially considering large boulders.
基金supported by the National Natural Science Foundation of China (Grant No. 51575528)the Scientific Research Foundation of the Education Ministry for Returned Chinese Scholars (China)+1 种基金the State Key Laboratory for Coal Resources and Safe Mining, China University of Mining and Technology (No. SKLCRSM10KFB04)the Science Foundation of China University of Petroleum, Beijing (No. YXQN-2014-02)
文摘A remote-control tether-less isolation tool is a mechanical device that is normally used in pipelines to block the flow at a given position by transforming a blocking module. In this study, the interactions between the fluid and the plug module of the isolation tool were investigated. Simulations of the plug process and particle image velocimetry measurements were performed to study the flow characteristics. Numerical solutions for the continuity, momentum, and energy equations were obtained by using commercial software based on finite-volume techniques. Box–Behnken design was applied, and response surface methodology（RSM）-based CFD simulation analysis was conducted. The dynamic model in the plug process was built by RSM and used to evaluate the influences of the main mechanical parameters on the pressure during the plug process. The diameter of the isolation tool and the diameter of the plug module have strong influences on the process, and the length of the isolation tool has only a little influence on the plug process.
