BACKGROUND It has been confirmed that the increased posterior tibial slope over 12 degrees is a risk factor for anterior cruciate ligament injury,and varus deformity can aggravate the progression of medial osteoarthri...BACKGROUND It has been confirmed that the increased posterior tibial slope over 12 degrees is a risk factor for anterior cruciate ligament injury,and varus deformity can aggravate the progression of medial osteoarthritis.AIM To evaluate the efficacy of modified high tibial osteotomy(HTO)and anterior cruciate ligament reconstruction(ACLR)in the treatment of anterior cruciate ligament(ACL)injuries with varus deformities and increased posterior tibial slope(PTS)based on clinical and imaging data.METHODS The patient data in this retrospective study were collected from 2019 to 2021.A total of 6 patients were diagnosed with ACL injury combined with varus deformities and increased PTS.All patients underwent modified open wedge HTO and ACLR.The degree of correction of varus deformity and the PTS was evaluated by radiography and magnetic resonance imaging.RESULTS All 6 patients(6 knee joints)were followed up for an average of 20.8±3.7 months.The average age at surgery was 29.5±3.8 years.At the last follow-up,all patients resumed competitive sports.The International Knee Documentation Committee score increased from 50.3±3.1 to 87.0±2.8,the Lysholm score increased from 43.8±4.9 to 86±3.1,and the Tegner activity level increased from 2.2±0.7 to 7.0±0.6.The average movement distance of the tibia anterior translation was 4.8±1.1 mm,medial proximal tibial angle(MPTA)was 88.9±1.3°at the last follow-up,and the PTS was 8.4±1.4°,both of which were significantly higher than those before surgery(P<0.05).CONCLUSION Modified open wedge HTO combined with ACLR can effectively treat patients with ACL ruptures with an associated increased PTS and varus deformity.The short-term effect is significant,but the long-term effect requires further follow-up.展开更多
Background: Biplanar medial opening wedge high tibial osteotomy (MOWHTO) is a treatment method that allows adequate correction of symptomatic varus knee deformity. However, MOWHTO tends to decrease patellar height and...Background: Biplanar medial opening wedge high tibial osteotomy (MOWHTO) is a treatment method that allows adequate correction of symptomatic varus knee deformity. However, MOWHTO tends to decrease patellar height and increase the posterior tibial slope, which can affect the knee joint stability. Objective: The aim of this study was to describe the technique of biplanar MOWHTO and fixation by TomoFix plate, as well as to evaluate the accuracy of the planned correction and the postoperative tibial slope. Patients and Methods: This prospective cohort study was conducted on patients who presented with varus knee deformity and underwent biplanar MOWHTO and fixation by TomoFix plate during the period from March 2016 to March 2017. Assessment of patients included pre- and postoperative Knee and function scores, mechanical femorotibial angle (mFTA), posterior tibial slope angle (pTSA), range of motion (ROM) and radiological evaluation of the healing of the osteotomy site. Results: The recruited patients were 13 (8 men and 5 women), with average age 31.7 years old. The knee and functional scores improved from the preoperative mean of 45 and 41 to the postoperative mean of 85 and 72 points, respectively. The average knee flexion was 115 degrees, which at the final follow-up remained unchanged except for one case. The mean preoperative mFTA was 13.5°varus and decreased post-operatively to a mean of 3°valgus. The average postoperative follow-up period was 12 months (10 - 18 M). Conclusion: The biplanar MOWHTO allows preservation of posterior tibial slope while correcting the varus knee adequately.展开更多
Aim: To introduce and characterize the modified biplanar opening high tibial osteotomy with rigid fixation to treat unicompartmental knee arthritis with varus deformity in active lifestyle patients. Patients and Metho...Aim: To introduce and characterize the modified biplanar opening high tibial osteotomy with rigid fixation to treat unicompartmental knee arthritis with varus deformity in active lifestyle patients. Patients and Method: 48 patients (19 females) with monocompartmental gonarthrosis of the knee combined with varus malalignment, 41 with bilateral affection and 7 cases with unilateral gonarthritis (total 89 knees). Mean age: 53 years (range from 42 to 61 years). They were treated and followed from June 2010 to May 2014 (35 months). Biplanar opening high tibial osteotomy technique was used and fixed by low profile locked T-plate (21 cases) and low profile anatomical proximal tibial plate (27cases). Pre-operative mean varus deformity was 16.5° (9° - 19°). We utilized Lysholm score and Knee Society Score for evaluation of preoperative and follow-up data. Results: The average correction angle was 11.50 ± 2.50° (7° - 19°). Preoperative posterior tibial slope was 8.04° ± 1.30° and at last follow-up 9.15° ± 1.60°, respectively (p = 0.437). The joint space distance increased from 4.05 ± 1.30 mm to 4.83 ± 1.33 mm (p < 0.001). The average time to complete bone union was 14.69 ± 1.5 weeks. There were no cases of delayed union or non-union. No major complications like broken plate, nerve injury, or blood vessel injury occurred. No progression of degenerations developed in the three compartments of the knee at final follow-up. The mean score on the Lysholm-Gillquist knee functional scoring scale was 45.5 ± 21.7 preoperatively, and it improved to 77.0 ± 23.9 (p < 0.001). There was no obvious difference in the range of motion before and after operation. The average knee score improved from 51.19 ± 11.82 to 93.49 ± 5.10. Conclusion: Biplanar opening high tibial osteotomy fixed with locking compression plate gives good results for symptomatic unicompartmental gonarthrosis with genu varum. Also this technique can be applied for medial compartment degeneration of the knee without deformity with good functional outcomes.展开更多
BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an ...BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.展开更多
文摘BACKGROUND It has been confirmed that the increased posterior tibial slope over 12 degrees is a risk factor for anterior cruciate ligament injury,and varus deformity can aggravate the progression of medial osteoarthritis.AIM To evaluate the efficacy of modified high tibial osteotomy(HTO)and anterior cruciate ligament reconstruction(ACLR)in the treatment of anterior cruciate ligament(ACL)injuries with varus deformities and increased posterior tibial slope(PTS)based on clinical and imaging data.METHODS The patient data in this retrospective study were collected from 2019 to 2021.A total of 6 patients were diagnosed with ACL injury combined with varus deformities and increased PTS.All patients underwent modified open wedge HTO and ACLR.The degree of correction of varus deformity and the PTS was evaluated by radiography and magnetic resonance imaging.RESULTS All 6 patients(6 knee joints)were followed up for an average of 20.8±3.7 months.The average age at surgery was 29.5±3.8 years.At the last follow-up,all patients resumed competitive sports.The International Knee Documentation Committee score increased from 50.3±3.1 to 87.0±2.8,the Lysholm score increased from 43.8±4.9 to 86±3.1,and the Tegner activity level increased from 2.2±0.7 to 7.0±0.6.The average movement distance of the tibia anterior translation was 4.8±1.1 mm,medial proximal tibial angle(MPTA)was 88.9±1.3°at the last follow-up,and the PTS was 8.4±1.4°,both of which were significantly higher than those before surgery(P<0.05).CONCLUSION Modified open wedge HTO combined with ACLR can effectively treat patients with ACL ruptures with an associated increased PTS and varus deformity.The short-term effect is significant,but the long-term effect requires further follow-up.
文摘Background: Biplanar medial opening wedge high tibial osteotomy (MOWHTO) is a treatment method that allows adequate correction of symptomatic varus knee deformity. However, MOWHTO tends to decrease patellar height and increase the posterior tibial slope, which can affect the knee joint stability. Objective: The aim of this study was to describe the technique of biplanar MOWHTO and fixation by TomoFix plate, as well as to evaluate the accuracy of the planned correction and the postoperative tibial slope. Patients and Methods: This prospective cohort study was conducted on patients who presented with varus knee deformity and underwent biplanar MOWHTO and fixation by TomoFix plate during the period from March 2016 to March 2017. Assessment of patients included pre- and postoperative Knee and function scores, mechanical femorotibial angle (mFTA), posterior tibial slope angle (pTSA), range of motion (ROM) and radiological evaluation of the healing of the osteotomy site. Results: The recruited patients were 13 (8 men and 5 women), with average age 31.7 years old. The knee and functional scores improved from the preoperative mean of 45 and 41 to the postoperative mean of 85 and 72 points, respectively. The average knee flexion was 115 degrees, which at the final follow-up remained unchanged except for one case. The mean preoperative mFTA was 13.5°varus and decreased post-operatively to a mean of 3°valgus. The average postoperative follow-up period was 12 months (10 - 18 M). Conclusion: The biplanar MOWHTO allows preservation of posterior tibial slope while correcting the varus knee adequately.
文摘Aim: To introduce and characterize the modified biplanar opening high tibial osteotomy with rigid fixation to treat unicompartmental knee arthritis with varus deformity in active lifestyle patients. Patients and Method: 48 patients (19 females) with monocompartmental gonarthrosis of the knee combined with varus malalignment, 41 with bilateral affection and 7 cases with unilateral gonarthritis (total 89 knees). Mean age: 53 years (range from 42 to 61 years). They were treated and followed from June 2010 to May 2014 (35 months). Biplanar opening high tibial osteotomy technique was used and fixed by low profile locked T-plate (21 cases) and low profile anatomical proximal tibial plate (27cases). Pre-operative mean varus deformity was 16.5° (9° - 19°). We utilized Lysholm score and Knee Society Score for evaluation of preoperative and follow-up data. Results: The average correction angle was 11.50 ± 2.50° (7° - 19°). Preoperative posterior tibial slope was 8.04° ± 1.30° and at last follow-up 9.15° ± 1.60°, respectively (p = 0.437). The joint space distance increased from 4.05 ± 1.30 mm to 4.83 ± 1.33 mm (p < 0.001). The average time to complete bone union was 14.69 ± 1.5 weeks. There were no cases of delayed union or non-union. No major complications like broken plate, nerve injury, or blood vessel injury occurred. No progression of degenerations developed in the three compartments of the knee at final follow-up. The mean score on the Lysholm-Gillquist knee functional scoring scale was 45.5 ± 21.7 preoperatively, and it improved to 77.0 ± 23.9 (p < 0.001). There was no obvious difference in the range of motion before and after operation. The average knee score improved from 51.19 ± 11.82 to 93.49 ± 5.10. Conclusion: Biplanar opening high tibial osteotomy fixed with locking compression plate gives good results for symptomatic unicompartmental gonarthrosis with genu varum. Also this technique can be applied for medial compartment degeneration of the knee without deformity with good functional outcomes.
文摘BACKGROUND Recently,medical three-dimensional printing technology(3DPT)has demonstrated potential benefits for the treatment of cubitus varus deformity(CVD)by improving accuracy of the osteotomy through the use of an osteotomy guide,with or without a patient-mated plate.Here,we present an interesting CVD case,involving a patient who was treated with corrective biplanar chevron osteotomy using an innovative customized osteotomy guide and a newly designed patient-matched monoblock crosslink plate created with 3DPT.CASE SUMMARY A 32-year-old female presented with a significant CVD from childhood injury.A computer simulation was processed using images from computerized tomography scans of both upper extremities.The biplanar chevron osteotomy was designed to create identical anatomy between the mirror image of the contralateral distal humerus and the osteotomized distal humerus.Next,the customized osteotomy guide and patient-matched monoblock crosslink plate were designed and printed.A simulation osteotomy was created for the real-sized bone model,and the operation was performed using the posterior paratricipital approach with k-wire positioning from the customized osteotomy guide as a predrilled hole for screw fixation to achieve immediate control of the reduction after osteotomy.Our method allowed for successful treatment of the CVD case,significantly improving the patient’s radiographic and clinical outcomes,with satisfactory result.CONCLUSION 3DPT-created patient-matched osteotomy guide and instrumentation provides accurate control during CVD correction.
