This review provides a glimpse of the potential of the biodegradable phos-phoryl-containing polymers in medical applications. Undoubtedly these polymerspossess unique properties that are yet to be fully understood. Ma...This review provides a glimpse of the potential of the biodegradable phos-phoryl-containing polymers in medical applications. Undoubtedly these polymerspossess unique properties that are yet to be fully understood. Many areas warrantfurther investigation and much optimization remains to be done. The fascinatingchemistry of phosphorus poses interesting hurdles but at the same time leavesample room for polymer scientists to exercise their creativity in designinginteresting biomaterials. As the mutual understanding between basic and clinicalscientists on the need of medical devices and the capabilities of these newbiomaterials expands, imaginative application of new biomaterials to other medi-cal applications can be expected.展开更多
Poly（L-lactic acid） （PLLA） and poly（e-caprolactone） （PCL） have been receiving much attention lately due to their biodegradability in human body as well as in the soil, also due to their biocompatibility, envir...Poly（L-lactic acid） （PLLA） and poly（e-caprolactone） （PCL） have been receiving much attention lately due to their biodegradability in human body as well as in the soil, also due to their biocompatibility, environmentally friendly characteristics and non-toxicity. Morphology of biodegradable polymers affects the rate of their biodegradation. A polymer that has high degree of crystallinity will degrade at a slower rate due to the inherent increased stability. PCL homopolymer crosslinking degree increases with increasing doses of high energy radiation. On the other hand, the irradiation ofPLLA homopolymer promotes mainly chain-scissions at doses below 250 kGy. In the present work, twin screw extruded films of PLLA and PCL biodegradable homopolymers and 50：50 （w：w） blend were electron beam irradiated using electron beam accelerator Dynamitron （E = 1.5 MeV） from Radiation Dynamics, Inc. at doses in the range of 50 kGy to 103 kGy in order to evaluate the effect of electron beam radiation. Wide-angle X-ray diffraction （WAXD） patterns of non irradiated and irradiated samples were obtained using a diffractometer Rigaku Denki Co. Ltd., Multiflex model; and Fourier transform infrared spectroscopy （FTIR） spectra was obtained using a NICOLET 4700, attenuated total reflectance （ATR） technique. By WAXD patterns of as extruded non irradiated and irradiated PLLA it was verified broad diffusion peaks corresponding to amorphous polymer. There was a slight increase of the mean crystallite size of PCL homopolymer with increasing radiation dose. PCL crystalline index （CI） decreased with radiation dose above 500 kGy. But then, PLLA CI increased with radiation dose above 750 kGy. From another point of view, PLLA presence on the 50：50 blend did not interfere on the observed mean crystallite size increase up to 250 kGy. From 500 kGy to 103 kGy the crystallite size of PCL was a little bigger in the blend than the homopolymer. In contrast, FTIR results have shown that this technique was not sensitive enough to observe the degradation promoted by ionizing radiation of the studied homopolymers and blends, and neither on the miscibility of the blends.展开更多
Traditional ring-opening metathesis polymerization(ROMP)reactions exhibit broad functional group compatibility and precise control over polymer architectures,albeit with non-biodegradable backbones.Recent progress has...Traditional ring-opening metathesis polymerization(ROMP)reactions exhibit broad functional group compatibility and precise control over polymer architectures,albeit with non-biodegradable backbones.Recent progress has resulted in a series of biodegradable ROMP products with diverse cleavable functional groups,yet the majority of the monomers display moderate to low ring strain,which restricts their living polymerization reactivity.In this study,a novel category of readily available 7-oxa-2,3-diazanorbornenes(ODAN)is presented,which exhibits the highest ring strain(22.8 kcal/mol)compared to existing degradable ROMP monomers.This trait endows ODAN with the ability to perform living polymerization reactions,generating narrowly dispersed homopolymers,block copolymers,and statistical copolymers with various cyclic olefin comonomers,thereby enabling precise control over distribution of the biodegradable functional groups.Additionally,the resultant polymers comprise directly connected allyl hemiaminal ether and urethane units,which are hydrolyzable at controllable rates.Thus,these well-defined,structure-tunable,and backbone-biodegradable ROMP polymers are applied as nanoetching materials and biodegradable delivery carriers.展开更多
Three-dimensional(3 D)printing has revolutionized the design and production of customized scaffolds,but the minimally invasive implantation of 3 D-printed structures into the human body remains challenging.This has pr...Three-dimensional(3 D)printing has revolutionized the design and production of customized scaffolds,but the minimally invasive implantation of 3 D-printed structures into the human body remains challenging.This has prompted the exploration of innovative materials and technical solutions.Shape-memory polymers,as advanced intelligent materials,exhibit considerable potential in minimally invasive surgical applications.Herein,we developed a novel thermosetting shape-memory polymer,poly(L-lactic acid)-trimethylene carbonate-glycolic acid(PLLA-TMC-GA),for the fabrication of bioengineered scaffolds with body temperature-activated shape-memory functionality.We comprehensively evaluated the mechanical properties,thermal stability,shape-memory capabilities,biocompatibility,biodegradability,and 3 D printing performance of PLLA-TMC-GA terpolymers with various compositions.The results indicate that PLLA-TMC-GA exhibits exceptional shape-memory performance,adjustable material properties,favorable biocompatibility,and the potential for controlled biodegradation and reabsorption.The use of PLLA-TMC-GA as a biodegradable shape-memory polymer allows the reduction of implant volume,simplifies implantation,and enables on-demand activation at body temperature.These characteristics present new opportunities for the advancement of minimally invasive surgical techniques.展开更多
Biodegradable polymers are a promising sustainable alternative to conventional petroleum-based polymers and have attracted recent extensive research interest due to their potential environmental friendliness and susta...Biodegradable polymers are a promising sustainable alternative to conventional petroleum-based polymers and have attracted recent extensive research interest due to their potential environmental friendliness and sustainability. Among them, aliphatic polyesters and polycarbonates are the most extensively studied ones. The metal-catalyzed ring-opening polymerization(ROP) of cyclic esters and ring-opening copolymerization(ROCOP) of epoxides with anhydrides or CO_(2) are often considered to be the classic and efficient methods to synthesize stereoregular polymers. Moreover, the versatile salen-type metal complexes have been used to prepare almost all types of biodegradable polymers with excellent stereoselectivity control. Hence, this review focuses on stereoselective synthesis of biodegradable polymers by salen-type metal catalysts developed in the last decade.Aliphatic polyesters from ROP of cyclic esters, ROCOP of epoxides with cyclic anhydrides, and carbonylative polymerization of epoxides, as well as aliphatic poly(thio)carbonate from ROCOP of epoxides with CO_(2) or COS are discussed in detail. This review highlights the polymerization mechanisms, catalyst characteristics, and factors controlling the stereoselectivity of each polymerization reaction, aiming to provide general rules for the future design of stereoselective catalysts.展开更多
Novel biodegradable copolymer poly（CC-co-EEP） was synthesized by ring-opening copolymerization of cyclic carbonate 9-phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one （CC） and ethylene ethyl phosphate （EEP）. ...Novel biodegradable copolymer poly（CC-co-EEP） was synthesized by ring-opening copolymerization of cyclic carbonate 9-phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one （CC） and ethylene ethyl phosphate （EEP）. The obtained poly （CC-co-EEP）s were characterized by FTIR, ^1H NMR, ^13C NMR and gel permeation chromatography （GPC）. In vitro hydrolytic degradation of the copolymers were investigated in phosphate buffer solution （pH=7.4）. Hydrophilic phosphate units apparently improved the degradability of poly（carbonate-phosphate）.展开更多
Silk fibroin （SF） is a kind of natural polymers with a great potential in biomedical application. Due to its good biocompatibility, biodegradability and minimal inflammatory reaction, SF is an excellent candidate fo...Silk fibroin （SF） is a kind of natural polymers with a great potential in biomedical application. Due to its good biocompatibility, biodegradability and minimal inflammatory reaction, SF is an excellent candidate for generating tissue engineering scaffolds. Electrospinning is a simple and effective method to fabricate nanofibers, which has several amazing characteristics such as very large surface area to volume ratio, flexibility in surface functionalities, and superior mechanical performance. The electro- spun nanofibers from SF and its blends have been used for varied tissue engineering. This paper will give a brief review about the structure, properties and applications of SF and blend nanofibers via electrospinning.展开更多
Supramolecular adhesives that enable debonding on-demand are of significant research interest for the development of adaptive and smart materials,yet,biodegrable supramolecular adhesives have been rarely exploited.Her...Supramolecular adhesives that enable debonding on-demand are of significant research interest for the development of adaptive and smart materials,yet,biodegrable supramolecular adhesives have been rarely exploited.Herein,telechelic,three-armed and four-armed CO_(2)-based polyols with close molecular weights and various content(or carbonate unite content)have been synthesized via a zinc-cobalt double metal cyanide complex catalyzed ring-opening copolymerization of CO_(2) and propylene oxide,and further exploited as sustainable and biodegradable building blocks for supramolecular polymers(SMPs)with 2-ureido-4[1H]-pyrimidinone(UPy)motifs.Notably,the orthogonal modulation of the CO_(2) content and the topology of CO_(2)-based polyols provide a unique opportunity to fine-tune the surface energy as well as the cohesive strength of the resulting CO_(2)-based SMPs.Notably,a three-armed SMP with 44%CO_(2)(3UPy-CO_(2)-44%)can well balance the trade-off between surface energy and cohesive strength,therefore bestowing a high adhesive strength of 7.5 and 9.7 MPa towards stainless steel and wood substrates respectively by testing the corresponding single lap joints.Moreover,the light-responsive adhesion property of 3UPy-CO_(2)-44%has been demonstrated exemplarily by blending with a UV sensitizer.展开更多
The selection of carbon sources and the biosynthesis of polyhydroxybutyrate(PHB)by the Azotobacter vinelandii N-15 strain using renewable raw materials were investigated.Among the tested substrates(starch,sucrose,mola...The selection of carbon sources and the biosynthesis of polyhydroxybutyrate(PHB)by the Azotobacter vinelandii N-15 strain using renewable raw materials were investigated.Among the tested substrates(starch,sucrose,molasses,bran),molasses as the carbon source yielded the highest PHB production.The maximum polymer yield(26%of dry biomass)was achieved at a molasses concentration of 40 g/L.PHB formation was confirmed via thinlayer chromatography,gas chromatography and Fourier transform infrared spectroscopy.Composite films based on PHB,polylactic acid(PLA),and their blends were fabricated using the solvent casting.The biodegradation of these films was studied with bacteria isolated from plastic-contaminated soil.These bacteria utilized the biopolymers as their sole carbon source,with the biodegradation process lasting three months.Structural and chemical changes in the films were analyzed using FTIR spectroscopy,differential scanning calorimetry,and thermogravimetry.Among the microorganisms used to study the biodegradation of PHB,PLA,and their blends,Streptomyces sp.K2 and Streptomyces sp.K4 exhibited the highest biodegradation efficiency.PHB-containing films demonstrated significant advantages over other biodegradable polymers,as they degrade under aerobic conditions via enzymatic hydrolysis using microbial depolymerases.展开更多
Binary biodegradable polymers films, poly(butylene adipate-co-terephthalate)(PBAT) and poly(glycolic acid)(PGA), were prepared through batch melt mixing to obtain Film Ⅰ and Film Ⅱ under two different processing con...Binary biodegradable polymers films, poly(butylene adipate-co-terephthalate)(PBAT) and poly(glycolic acid)(PGA), were prepared through batch melt mixing to obtain Film Ⅰ and Film Ⅱ under two different processing conditions. PGA crystals played a major role in enhancing the mechanical and barrier properties of the films. For Film Ⅰ, there were initial PGA crystals before the film blowing process, the PGA molecular chain further crystallized, forming the oriented crystallization of PGA. Moreover, the Xcand crystalline size in Film Ⅰ were higher than those in Film Ⅱ. Compared with the different processing methods, Film Ⅰ has excellent mechanical and oxygen barrier properties due to the crystallization and orientation. The tensile strength reached 45.0 MPa, and tear strength exceeded 138.2 kN/m, while the elongation at break was as high as 750% for PBAT/PGA 85/15 in Film Ⅰ. The WVTR, WVP coefficients, and OP coefficients of PBAT/PGA films were decreased obviously with increasing the PGA content both in Film Ⅰ and Film Ⅱ. Moreover, the barrier properties of oxygen in Film Ⅰ were better than that in Film Ⅱ. This work reveals a feasible processing technique by introducing of initial crystallization of PGA to blow PBAT/PGA films with excellent mechanical and barrier properties.展开更多
Partially biobased polysilylethers(PSEs)are synthesized via dehydrocoupling polymerization catalyzed by an anionic iridium complex.Different types(AB type or AA and BB type)of monomers are suitable.Levulinic acid(LA)a...Partially biobased polysilylethers(PSEs)are synthesized via dehydrocoupling polymerization catalyzed by an anionic iridium complex.Different types(AB type or AA and BB type)of monomers are suitable.Levulinic acid(LA)and succinic acid(SA)have been ranked within the top 10 chemicals derived from biomass.BB type monomers(diols)derived from LA and SA have been applied to the synthesis of PSEs.The polymerization reactions employ an air-stable anionic iridium complex bearing a functional bipyridonate ligand as catalyst.Moderate to high yields of polymers with number-average molecular weights(Mn)up to 4.38×104 were obtained.A possible catalytic cycle via an Ir-H species is presented.Based on the results of kinetic experiments,apparent activation energy of polymerization in the tempe rature range of 0-10℃is about 38.6 kJ/mol.The PSEs synthesized from AA and BB type monomers possess good thermal stability(T5=418℃to 437℃)and low glass-transition temperature(Tg=49.6℃).展开更多
Fully bio-based and biodegradable starch/polylactic acid blends have received increasing attentions for their biodegradability and potential to offset the use of unsustainable fossil resources,specifically,their appli...Fully bio-based and biodegradable starch/polylactic acid blends have received increasing attentions for their biodegradability and potential to offset the use of unsustainable fossil resources,specifically,their application in packaging.Herein,corn starch was first esterified with maleic anhydride and then compounded with polylactide(PLA)to prepare esterified corn starch/polylactic acid blends with starch content up to 35 wt%.The structures,morphologies,thermal and mechanical properties of starch or blends were investigated.The results showed that corn starch was successfully grafted with maleic anhydride,which showed increased crystallinity and particle size than native starch.Esterified corn starch/polylactic acid blends showed good surficial compatibility and good thermal stability with main decomposition temperature in the range of 300℃to 400℃.Additionally,incorporation of corn starch increased the hydrophilicity and water uptake of composites.However,the tensile and flexural strengths of blends decreased with increasing esterified starch amount.展开更多
Background Different stems implantation in ST-segmem elevation myocardial infarction （STEMI） patients may influence the long term prognosis by affecting vessel healings after stenting. The aim of this study was to e...Background Different stems implantation in ST-segmem elevation myocardial infarction （STEMI） patients may influence the long term prognosis by affecting vessel healings after stenting. The aim of this study was to evaluate the vessel healings after implantation of drug elming stems （DES） with biodegradable or durable polymer or of bare-metal stems （BMS） in patients with ache STEMI. Methods This study included 50 patients, who underwem follow up angiogram and optical coherence tomography （OCT） assessment about one year after percutaneous coronary intervemion （PCI） for STEMI. According to the initial stems types, these patients were classified to durable （n = 19） or biodegradable polymer sirolimus-eluting stems （n = 15）, or BMS （n = 16） groups. The conditions of stem struts coverage and malapposi- tion were analyzed with OCT technique. Results A total of 9003 struts were analyzed： 3299, 3202 and 2502 from durable or biodegradable polymer DES, or BMS, respectively. Strut coverage rate （89.0%, 94.9% and 99.3%, respectively）, malapposition presence （1.7%, 0.03% and 0 of struts, respectively） and average intimal thickness over struts （76 ± 12 μm, 161 ± 30 μm and 292 ± 29 μm, respectively） were significantly differem among different stent groups （all P 〈 0.001）. Conclusions Vessel healing status in STEMI patients is superior after implantation of biodegradable polymer DES than durable polymer DES, while both are inferior to BMS.展开更多
A series of aliphatic biodegradable poly（ether-ester）s based on poly（butylene succinate）（PBS）as hard segment and poly（tetramethylene oxide）（PTMO,M_n=1 000 g/mol） as soft segment were synthesized.The composit...A series of aliphatic biodegradable poly（ether-ester）s based on poly（butylene succinate）（PBS）as hard segment and poly（tetramethylene oxide）（PTMO,M_n=1 000 g/mol） as soft segment were synthesized.The composition dependence of thermal behavior,morphology and mechanical properties was investigated by differential scanning calorimetry（DSC）,atomic force microscopy（AFM）,and tensile testing.The crystallization temperature（T_c） and melting temperature（T_m） of the PBS block within poly（ether-ester）s decrease steadily at first,but decrease sharply with PTMO content above 50 wt%.Two crystallization peaks were detected for PTMO in PBSPTMO60 sample,suggesting the occurrence of fractionated crystallization.The crystallization enthalpies（△H_c） and melting enthalpies（△H_m） of PBS block decrease at first,then increase as PTMO content increases further.AFM has demonstrated that phase-separated morphology transforms from a phase of continuous hard matrix to one of continuous soft matrix containing isolated hard domain as PTMO content is increased.Finally,the results of tensile testing show that the poly（ether-ester）s present the behavior of plastics when PTMO content is below 40 wt%,and of thermoplastic elastomers with PTMO content above 50 wt%.By varying the composition of copolymer,the aliphatic poly（ether-ester）s plastics,or especially biodegradable aliphatic poly（ether-ester）s thermoplastic elastomers can be obtained.展开更多
Luminescent polymers have garnered considerable research attention for their excellent properties and wide range of applications in multi-responsive materials,bioimaging,and photoelectric devices.Thereout,various modu...Luminescent polymers have garnered considerable research attention for their excellent properties and wide range of applications in multi-responsive materials,bioimaging,and photoelectric devices.Thereout,various modulations of polymer structure are often the main approach to obtaining materials with different luminescent colors and functions.However,polymers with biodegradability,tunable color,and efficient emission simultaneously remain a challenge.Herein,we report a feasible strategy to achieve degradable and highly emissive polymers by exquisite combination and interplay of aggregation-induced emission(AIE)unit and environmental-friendly epoxide/CO_(2)copolymerization.A series of polycarbonates P-TEP_(x)CN_(y)(x=0,1,2,4,30,120;y=0,1)were prepared,with emission color changed from blue to yellow by controlling the proportion of two designed AIE-active monomers.Among them,Using P-TCN as emitting layer,high performance white light-emitting diode(WLED)device with an external quantum efficiency(EQE)of 26.09%and CIE coordinates of(0.32,0.32)was achieved.In addition,the designed polymers can be used as selective sensors for nitroaromatic compounds in their nanoaggregate states.展开更多
Both polyanhydrides and polyethers are new types of biodegradble polymers, They are of particular interest as materials for controlled drug release system duo to their excellent surface erosion properties of polyanhyd...Both polyanhydrides and polyethers are new types of biodegradble polymers, They are of particular interest as materials for controlled drug release system duo to their excellent surface erosion properties of polyanhydrides and excellent biocompatibility of polyethers. They hate been widly used in biomaterials. A series of polyether anhydrides elastomer were firstly synthesed through introducing PEG into the polyanhydrides chains. Their degradation and drug release property were also studied. These materials may be used in applications where materials are needed with properties more close to those of natural skin.展开更多
Background and Objective: In the contemporary practice, the use of drug-eluting stents is still associated with low mortality benefits, restenosis and stent thrombosis. To address these issues, newer generation, thin-...Background and Objective: In the contemporary practice, the use of drug-eluting stents is still associated with low mortality benefits, restenosis and stent thrombosis. To address these issues, newer generation, thin-strut, biodegradable polymer coated stents has been designed. Thus, the aim of the study is to assess the safety and clinical performance of the Everoflex (Sahajanand Medical Technologies Pvt. Ltd., Surat, India), a newer generation biodegradable polymer coated everolimus-eluting stent, in unselected “real-world” patients with coronary artery disease. Methods: It is a multicentre, retrospective, non-randomized, single-arm study enrolling all the consecutive patients who underwent implantation with the Everoflex for coronary artery disease from April 2014 to March 2016. The primary end-point of the study is 30-day major adverse cardiovascular events (MACE) rate, which consists of cardiac death, myocardial infarction, target lesion revascularization and target vessel revascularization. Stent thrombosis was also analyzed and reported. Results: A total of 340 patients were intervened successfully with 395 everolimus eluting stents (1.3 ± 0.6 stents per patient). Out of total patients (58.7 ± 10.5 years), 77.9% were male and comorbidities like diabetes and hypertension were observed in 31.2% and 35.3% patients, respectively. According to ACC/AHA classification, there were 34.4% type B lesions and 53.2% type C lesions, indicating a higher proportion of complexity involved. Moreover, 57.9% patients had multivessel disease and there were 15.4% total occlusions. At 30 days, follow-up was completed in 100% patients. The MACE was found to be 1.5%, which is a composite of 1.2% cardiac death and 0.3% target lesion revascularization. Stent thrombosis at 30 days was found to be 0.3%. Conclusion: The low incidence of MACE and stent thrombosis clearly depicts excellent safety and clinical performance of the Everoflex in unselected real world patients with coronary artery disease.展开更多
Current new generation stent technology has made remarkable progress in stent design, structure, and component material to improve its performance in reducing stent thrombosis, and restenosis compared to earlier DES a...Current new generation stent technology has made remarkable progress in stent design, structure, and component material to improve its performance in reducing stent thrombosis, and restenosis compared to earlier DES and BMS. Orsiro-Sirolimus eluting stent is new generation ultra-thin strut stent with biodegradable abluminal coating that leaves a polymer free stent after drug release enhances coverage of stent struts and prevents excess neo intimal proliferation. A retrospective data analysis was done to see safety and efficacy of Orsiro in patients treated with ultra-thin DES with Orsiro stents at Sunshine Hospitals, Hyderabad. A total of 331 patients with 525 lesions were treated with 506 Orsiro stents and the major adverse cardiac events (MACE) rate and stent thrombosis (ST) at 2 years’ follow-up were analysed. MACE rate was 1.6% for an average follow-up at 2 years. Out of 2 patients who developed ST, one presented with definite acute stent thrombosis and one with possible, late stent thrombosis and 1.8% non-cardiac death reported during the follow-up. Despite many patients with complex PCI in the ACS subset, Orsiro reduced significant reduction in MACE rate in all spectrum of coronary artery disease patients with excellent acute and long-term results similar to other established FDA-approved current generations stents.展开更多
OBJECTIVE:Local delivery of carmustine(BCNU)from biodegradablepolymers prolongs survival against experi-mental brain tumors.Moreover,paracrine administration of interleukin-2(IL-2)has been shown to elicit apotent anti...OBJECTIVE:Local delivery of carmustine(BCNU)from biodegradablepolymers prolongs survival against experi-mental brain tumors.Moreover,paracrine administration of interleukin-2(IL-2)has been shown to elicit apotent antitumor immune response and to improve survival in animal brain tumor models.We report the use of anovel polymeric microsphere delivery vehicle to release IL-2.We demonstrate both in vitro release of cytokinefrom the microspheres and histological evidence of the inflammatory response elicited by IL-2 released from themicrospheres in the rat brain.Thees microspheres are used to deliver IL-2,and biodegradable polymer wafers展开更多
文摘This review provides a glimpse of the potential of the biodegradable phos-phoryl-containing polymers in medical applications. Undoubtedly these polymerspossess unique properties that are yet to be fully understood. Many areas warrantfurther investigation and much optimization remains to be done. The fascinatingchemistry of phosphorus poses interesting hurdles but at the same time leavesample room for polymer scientists to exercise their creativity in designinginteresting biomaterials. As the mutual understanding between basic and clinicalscientists on the need of medical devices and the capabilities of these newbiomaterials expands, imaginative application of new biomaterials to other medi-cal applications can be expected.
文摘Poly（L-lactic acid） （PLLA） and poly（e-caprolactone） （PCL） have been receiving much attention lately due to their biodegradability in human body as well as in the soil, also due to their biocompatibility, environmentally friendly characteristics and non-toxicity. Morphology of biodegradable polymers affects the rate of their biodegradation. A polymer that has high degree of crystallinity will degrade at a slower rate due to the inherent increased stability. PCL homopolymer crosslinking degree increases with increasing doses of high energy radiation. On the other hand, the irradiation ofPLLA homopolymer promotes mainly chain-scissions at doses below 250 kGy. In the present work, twin screw extruded films of PLLA and PCL biodegradable homopolymers and 50：50 （w：w） blend were electron beam irradiated using electron beam accelerator Dynamitron （E = 1.5 MeV） from Radiation Dynamics, Inc. at doses in the range of 50 kGy to 103 kGy in order to evaluate the effect of electron beam radiation. Wide-angle X-ray diffraction （WAXD） patterns of non irradiated and irradiated samples were obtained using a diffractometer Rigaku Denki Co. Ltd., Multiflex model; and Fourier transform infrared spectroscopy （FTIR） spectra was obtained using a NICOLET 4700, attenuated total reflectance （ATR） technique. By WAXD patterns of as extruded non irradiated and irradiated PLLA it was verified broad diffusion peaks corresponding to amorphous polymer. There was a slight increase of the mean crystallite size of PCL homopolymer with increasing radiation dose. PCL crystalline index （CI） decreased with radiation dose above 500 kGy. But then, PLLA CI increased with radiation dose above 750 kGy. From another point of view, PLLA presence on the 50：50 blend did not interfere on the observed mean crystallite size increase up to 250 kGy. From 500 kGy to 103 kGy the crystallite size of PCL was a little bigger in the blend than the homopolymer. In contrast, FTIR results have shown that this technique was not sensitive enough to observe the degradation promoted by ionizing radiation of the studied homopolymers and blends, and neither on the miscibility of the blends.
基金financially supported by the National Natural Science Foundation of China(grant nos.22001254 and 22175188).
文摘Traditional ring-opening metathesis polymerization(ROMP)reactions exhibit broad functional group compatibility and precise control over polymer architectures,albeit with non-biodegradable backbones.Recent progress has resulted in a series of biodegradable ROMP products with diverse cleavable functional groups,yet the majority of the monomers display moderate to low ring strain,which restricts their living polymerization reactivity.In this study,a novel category of readily available 7-oxa-2,3-diazanorbornenes(ODAN)is presented,which exhibits the highest ring strain(22.8 kcal/mol)compared to existing degradable ROMP monomers.This trait endows ODAN with the ability to perform living polymerization reactions,generating narrowly dispersed homopolymers,block copolymers,and statistical copolymers with various cyclic olefin comonomers,thereby enabling precise control over distribution of the biodegradable functional groups.Additionally,the resultant polymers comprise directly connected allyl hemiaminal ether and urethane units,which are hydrolyzable at controllable rates.Thus,these well-defined,structure-tunable,and backbone-biodegradable ROMP polymers are applied as nanoetching materials and biodegradable delivery carriers.
基金supported by the National Natural Science Foundation of China(Nos.82402822,82360427,82372425,82072443,and 32200559)the Priority Union Foundation of Yunnan Provincial Science and Technology Department and Kunming Medical University(No.202301AY070001-164)+1 种基金the Natural Science Foundation of Sichuan Province(No.23NSFSC5880)the Central Government of Sichuan Province Guiding the Special Project of Local Science and Technology Development(No.2024ZYD0155).
文摘Three-dimensional(3 D)printing has revolutionized the design and production of customized scaffolds,but the minimally invasive implantation of 3 D-printed structures into the human body remains challenging.This has prompted the exploration of innovative materials and technical solutions.Shape-memory polymers,as advanced intelligent materials,exhibit considerable potential in minimally invasive surgical applications.Herein,we developed a novel thermosetting shape-memory polymer,poly(L-lactic acid)-trimethylene carbonate-glycolic acid(PLLA-TMC-GA),for the fabrication of bioengineered scaffolds with body temperature-activated shape-memory functionality.We comprehensively evaluated the mechanical properties,thermal stability,shape-memory capabilities,biocompatibility,biodegradability,and 3 D printing performance of PLLA-TMC-GA terpolymers with various compositions.The results indicate that PLLA-TMC-GA exhibits exceptional shape-memory performance,adjustable material properties,favorable biocompatibility,and the potential for controlled biodegradation and reabsorption.The use of PLLA-TMC-GA as a biodegradable shape-memory polymer allows the reduction of implant volume,simplifies implantation,and enables on-demand activation at body temperature.These characteristics present new opportunities for the advancement of minimally invasive surgical techniques.
基金supported by the National Natural Science Foundation of China (52173093)the Peking University Ge Li and Ning Zhao Life Science Research Fund for Young Scientists。
文摘Biodegradable polymers are a promising sustainable alternative to conventional petroleum-based polymers and have attracted recent extensive research interest due to their potential environmental friendliness and sustainability. Among them, aliphatic polyesters and polycarbonates are the most extensively studied ones. The metal-catalyzed ring-opening polymerization(ROP) of cyclic esters and ring-opening copolymerization(ROCOP) of epoxides with anhydrides or CO_(2) are often considered to be the classic and efficient methods to synthesize stereoregular polymers. Moreover, the versatile salen-type metal complexes have been used to prepare almost all types of biodegradable polymers with excellent stereoselectivity control. Hence, this review focuses on stereoselective synthesis of biodegradable polymers by salen-type metal catalysts developed in the last decade.Aliphatic polyesters from ROP of cyclic esters, ROCOP of epoxides with cyclic anhydrides, and carbonylative polymerization of epoxides, as well as aliphatic poly(thio)carbonate from ROCOP of epoxides with CO_(2) or COS are discussed in detail. This review highlights the polymerization mechanisms, catalyst characteristics, and factors controlling the stereoselectivity of each polymerization reaction, aiming to provide general rules for the future design of stereoselective catalysts.
基金The authors are grateful for the financial support of National Key Basic Research and Development Program （2005CB623903） National Natural Science Foundation of China （Grant No. 20174029）.
文摘Novel biodegradable copolymer poly（CC-co-EEP） was synthesized by ring-opening copolymerization of cyclic carbonate 9-phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one （CC） and ethylene ethyl phosphate （EEP）. The obtained poly （CC-co-EEP）s were characterized by FTIR, ^1H NMR, ^13C NMR and gel permeation chromatography （GPC）. In vitro hydrolytic degradation of the copolymers were investigated in phosphate buffer solution （pH=7.4）. Hydrophilic phosphate units apparently improved the degradability of poly（carbonate-phosphate）.
文摘Silk fibroin （SF） is a kind of natural polymers with a great potential in biomedical application. Due to its good biocompatibility, biodegradability and minimal inflammatory reaction, SF is an excellent candidate for generating tissue engineering scaffolds. Electrospinning is a simple and effective method to fabricate nanofibers, which has several amazing characteristics such as very large surface area to volume ratio, flexibility in surface functionalities, and superior mechanical performance. The electro- spun nanofibers from SF and its blends have been used for varied tissue engineering. This paper will give a brief review about the structure, properties and applications of SF and blend nanofibers via electrospinning.
基金financially supported by the National Natural Science Foundation of China(No.21604027)National Key R&D Plan of China(No.2016YFB0302400)the analytical and testing assistance from the Analysis and Testing Centre of HUST。
文摘Supramolecular adhesives that enable debonding on-demand are of significant research interest for the development of adaptive and smart materials,yet,biodegrable supramolecular adhesives have been rarely exploited.Herein,telechelic,three-armed and four-armed CO_(2)-based polyols with close molecular weights and various content(or carbonate unite content)have been synthesized via a zinc-cobalt double metal cyanide complex catalyzed ring-opening copolymerization of CO_(2) and propylene oxide,and further exploited as sustainable and biodegradable building blocks for supramolecular polymers(SMPs)with 2-ureido-4[1H]-pyrimidinone(UPy)motifs.Notably,the orthogonal modulation of the CO_(2) content and the topology of CO_(2)-based polyols provide a unique opportunity to fine-tune the surface energy as well as the cohesive strength of the resulting CO_(2)-based SMPs.Notably,a three-armed SMP with 44%CO_(2)(3UPy-CO_(2)-44%)can well balance the trade-off between surface energy and cohesive strength,therefore bestowing a high adhesive strength of 7.5 and 9.7 MPa towards stainless steel and wood substrates respectively by testing the corresponding single lap joints.Moreover,the light-responsive adhesion property of 3UPy-CO_(2)-44%has been demonstrated exemplarily by blending with a UV sensitizer.
基金financial support of this paper by the Ministry of Education and Science of Ukraine under grant(Biotherm/0124U000789).
文摘The selection of carbon sources and the biosynthesis of polyhydroxybutyrate(PHB)by the Azotobacter vinelandii N-15 strain using renewable raw materials were investigated.Among the tested substrates(starch,sucrose,molasses,bran),molasses as the carbon source yielded the highest PHB production.The maximum polymer yield(26%of dry biomass)was achieved at a molasses concentration of 40 g/L.PHB formation was confirmed via thinlayer chromatography,gas chromatography and Fourier transform infrared spectroscopy.Composite films based on PHB,polylactic acid(PLA),and their blends were fabricated using the solvent casting.The biodegradation of these films was studied with bacteria isolated from plastic-contaminated soil.These bacteria utilized the biopolymers as their sole carbon source,with the biodegradation process lasting three months.Structural and chemical changes in the films were analyzed using FTIR spectroscopy,differential scanning calorimetry,and thermogravimetry.Among the microorganisms used to study the biodegradation of PHB,PLA,and their blends,Streptomyces sp.K2 and Streptomyces sp.K4 exhibited the highest biodegradation efficiency.PHB-containing films demonstrated significant advantages over other biodegradable polymers,as they degrade under aerobic conditions via enzymatic hydrolysis using microbial depolymerases.
基金supported by the Science and Technology Development Plan of Jilin Province(Nos.20210203199SF and 20210509017RQ)the Science and Technology Development Program of Yantai of China(No.2022ZDCX015)+2 种基金the Chinese Academy of Sciences(Changchun Branch)(Nos.2021SYHZ0044 and 2021SYHZ0042)Science and Technology Bureau of Changchun City of China(Nos.21SH13 and 21KY01)Development and Reform commission of Jilin Province of China(No.2021C039-2).
文摘Binary biodegradable polymers films, poly(butylene adipate-co-terephthalate)(PBAT) and poly(glycolic acid)(PGA), were prepared through batch melt mixing to obtain Film Ⅰ and Film Ⅱ under two different processing conditions. PGA crystals played a major role in enhancing the mechanical and barrier properties of the films. For Film Ⅰ, there were initial PGA crystals before the film blowing process, the PGA molecular chain further crystallized, forming the oriented crystallization of PGA. Moreover, the Xcand crystalline size in Film Ⅰ were higher than those in Film Ⅱ. Compared with the different processing methods, Film Ⅰ has excellent mechanical and oxygen barrier properties due to the crystallization and orientation. The tensile strength reached 45.0 MPa, and tear strength exceeded 138.2 kN/m, while the elongation at break was as high as 750% for PBAT/PGA 85/15 in Film Ⅰ. The WVTR, WVP coefficients, and OP coefficients of PBAT/PGA films were decreased obviously with increasing the PGA content both in Film Ⅰ and Film Ⅱ. Moreover, the barrier properties of oxygen in Film Ⅰ were better than that in Film Ⅱ. This work reveals a feasible processing technique by introducing of initial crystallization of PGA to blow PBAT/PGA films with excellent mechanical and barrier properties.
基金Financial support from the National Natural Science Foundation of China(No.21690074)Dalian Bureau of Science and Technology(No.2016RD07)Chinese Academy of Sciences(No.XDB17020300)。
文摘Partially biobased polysilylethers(PSEs)are synthesized via dehydrocoupling polymerization catalyzed by an anionic iridium complex.Different types(AB type or AA and BB type)of monomers are suitable.Levulinic acid(LA)and succinic acid(SA)have been ranked within the top 10 chemicals derived from biomass.BB type monomers(diols)derived from LA and SA have been applied to the synthesis of PSEs.The polymerization reactions employ an air-stable anionic iridium complex bearing a functional bipyridonate ligand as catalyst.Moderate to high yields of polymers with number-average molecular weights(Mn)up to 4.38×104 were obtained.A possible catalytic cycle via an Ir-H species is presented.Based on the results of kinetic experiments,apparent activation energy of polymerization in the tempe rature range of 0-10℃is about 38.6 kJ/mol.The PSEs synthesized from AA and BB type monomers possess good thermal stability(T5=418℃to 437℃)and low glass-transition temperature(Tg=49.6℃).
基金the Fundamental Research Funds for Higher Education Institutions of Heilongjiang Province(135309109,135409415)National Natural Science Foundation of China(51803029).
文摘Fully bio-based and biodegradable starch/polylactic acid blends have received increasing attentions for their biodegradability and potential to offset the use of unsustainable fossil resources,specifically,their application in packaging.Herein,corn starch was first esterified with maleic anhydride and then compounded with polylactide(PLA)to prepare esterified corn starch/polylactic acid blends with starch content up to 35 wt%.The structures,morphologies,thermal and mechanical properties of starch or blends were investigated.The results showed that corn starch was successfully grafted with maleic anhydride,which showed increased crystallinity and particle size than native starch.Esterified corn starch/polylactic acid blends showed good surficial compatibility and good thermal stability with main decomposition temperature in the range of 300℃to 400℃.Additionally,incorporation of corn starch increased the hydrophilicity and water uptake of composites.However,the tensile and flexural strengths of blends decreased with increasing esterified starch amount.
文摘Background Different stems implantation in ST-segmem elevation myocardial infarction （STEMI） patients may influence the long term prognosis by affecting vessel healings after stenting. The aim of this study was to evaluate the vessel healings after implantation of drug elming stems （DES） with biodegradable or durable polymer or of bare-metal stems （BMS） in patients with ache STEMI. Methods This study included 50 patients, who underwem follow up angiogram and optical coherence tomography （OCT） assessment about one year after percutaneous coronary intervemion （PCI） for STEMI. According to the initial stems types, these patients were classified to durable （n = 19） or biodegradable polymer sirolimus-eluting stems （n = 15）, or BMS （n = 16） groups. The conditions of stem struts coverage and malapposi- tion were analyzed with OCT technique. Results A total of 9003 struts were analyzed： 3299, 3202 and 2502 from durable or biodegradable polymer DES, or BMS, respectively. Strut coverage rate （89.0%, 94.9% and 99.3%, respectively）, malapposition presence （1.7%, 0.03% and 0 of struts, respectively） and average intimal thickness over struts （76 ± 12 μm, 161 ± 30 μm and 292 ± 29 μm, respectively） were significantly differem among different stent groups （all P 〈 0.001）. Conclusions Vessel healing status in STEMI patients is superior after implantation of biodegradable polymer DES than durable polymer DES, while both are inferior to BMS.
基金Funded by the National Natural Science Foundation of China(No.50873071)the Teaching and Research Award Program for Outstanding Young Professors in Higher Education Institute,MOE,China
文摘A series of aliphatic biodegradable poly（ether-ester）s based on poly（butylene succinate）（PBS）as hard segment and poly（tetramethylene oxide）（PTMO,M_n=1 000 g/mol） as soft segment were synthesized.The composition dependence of thermal behavior,morphology and mechanical properties was investigated by differential scanning calorimetry（DSC）,atomic force microscopy（AFM）,and tensile testing.The crystallization temperature（T_c） and melting temperature（T_m） of the PBS block within poly（ether-ester）s decrease steadily at first,but decrease sharply with PTMO content above 50 wt%.Two crystallization peaks were detected for PTMO in PBSPTMO60 sample,suggesting the occurrence of fractionated crystallization.The crystallization enthalpies（△H_c） and melting enthalpies（△H_m） of PBS block decrease at first,then increase as PTMO content increases further.AFM has demonstrated that phase-separated morphology transforms from a phase of continuous hard matrix to one of continuous soft matrix containing isolated hard domain as PTMO content is increased.Finally,the results of tensile testing show that the poly（ether-ester）s present the behavior of plastics when PTMO content is below 40 wt%,and of thermoplastic elastomers with PTMO content above 50 wt%.By varying the composition of copolymer,the aliphatic poly（ether-ester）s plastics,or especially biodegradable aliphatic poly（ether-ester）s thermoplastic elastomers can be obtained.
基金supported by the National Natural Science Foundation of China(No.22175033)the Scientific and Technological Innovation Team of Shanxi Province(No.2022TD-36).
文摘Luminescent polymers have garnered considerable research attention for their excellent properties and wide range of applications in multi-responsive materials,bioimaging,and photoelectric devices.Thereout,various modulations of polymer structure are often the main approach to obtaining materials with different luminescent colors and functions.However,polymers with biodegradability,tunable color,and efficient emission simultaneously remain a challenge.Herein,we report a feasible strategy to achieve degradable and highly emissive polymers by exquisite combination and interplay of aggregation-induced emission(AIE)unit and environmental-friendly epoxide/CO_(2)copolymerization.A series of polycarbonates P-TEP_(x)CN_(y)(x=0,1,2,4,30,120;y=0,1)were prepared,with emission color changed from blue to yellow by controlling the proportion of two designed AIE-active monomers.Among them,Using P-TCN as emitting layer,high performance white light-emitting diode(WLED)device with an external quantum efficiency(EQE)of 26.09%and CIE coordinates of(0.32,0.32)was achieved.In addition,the designed polymers can be used as selective sensors for nitroaromatic compounds in their nanoaggregate states.
基金Supported by the Naturel Science Foundation of Hubei province (2001.6) and Foundation of Scientific Research for Re-turned Overseas Schodars (2001.3)
文摘Both polyanhydrides and polyethers are new types of biodegradble polymers, They are of particular interest as materials for controlled drug release system duo to their excellent surface erosion properties of polyanhydrides and excellent biocompatibility of polyethers. They hate been widly used in biomaterials. A series of polyether anhydrides elastomer were firstly synthesed through introducing PEG into the polyanhydrides chains. Their degradation and drug release property were also studied. These materials may be used in applications where materials are needed with properties more close to those of natural skin.
文摘Background and Objective: In the contemporary practice, the use of drug-eluting stents is still associated with low mortality benefits, restenosis and stent thrombosis. To address these issues, newer generation, thin-strut, biodegradable polymer coated stents has been designed. Thus, the aim of the study is to assess the safety and clinical performance of the Everoflex (Sahajanand Medical Technologies Pvt. Ltd., Surat, India), a newer generation biodegradable polymer coated everolimus-eluting stent, in unselected “real-world” patients with coronary artery disease. Methods: It is a multicentre, retrospective, non-randomized, single-arm study enrolling all the consecutive patients who underwent implantation with the Everoflex for coronary artery disease from April 2014 to March 2016. The primary end-point of the study is 30-day major adverse cardiovascular events (MACE) rate, which consists of cardiac death, myocardial infarction, target lesion revascularization and target vessel revascularization. Stent thrombosis was also analyzed and reported. Results: A total of 340 patients were intervened successfully with 395 everolimus eluting stents (1.3 ± 0.6 stents per patient). Out of total patients (58.7 ± 10.5 years), 77.9% were male and comorbidities like diabetes and hypertension were observed in 31.2% and 35.3% patients, respectively. According to ACC/AHA classification, there were 34.4% type B lesions and 53.2% type C lesions, indicating a higher proportion of complexity involved. Moreover, 57.9% patients had multivessel disease and there were 15.4% total occlusions. At 30 days, follow-up was completed in 100% patients. The MACE was found to be 1.5%, which is a composite of 1.2% cardiac death and 0.3% target lesion revascularization. Stent thrombosis at 30 days was found to be 0.3%. Conclusion: The low incidence of MACE and stent thrombosis clearly depicts excellent safety and clinical performance of the Everoflex in unselected real world patients with coronary artery disease.
文摘Current new generation stent technology has made remarkable progress in stent design, structure, and component material to improve its performance in reducing stent thrombosis, and restenosis compared to earlier DES and BMS. Orsiro-Sirolimus eluting stent is new generation ultra-thin strut stent with biodegradable abluminal coating that leaves a polymer free stent after drug release enhances coverage of stent struts and prevents excess neo intimal proliferation. A retrospective data analysis was done to see safety and efficacy of Orsiro in patients treated with ultra-thin DES with Orsiro stents at Sunshine Hospitals, Hyderabad. A total of 331 patients with 525 lesions were treated with 506 Orsiro stents and the major adverse cardiac events (MACE) rate and stent thrombosis (ST) at 2 years’ follow-up were analysed. MACE rate was 1.6% for an average follow-up at 2 years. Out of 2 patients who developed ST, one presented with definite acute stent thrombosis and one with possible, late stent thrombosis and 1.8% non-cardiac death reported during the follow-up. Despite many patients with complex PCI in the ACS subset, Orsiro reduced significant reduction in MACE rate in all spectrum of coronary artery disease patients with excellent acute and long-term results similar to other established FDA-approved current generations stents.
文摘OBJECTIVE:Local delivery of carmustine(BCNU)from biodegradablepolymers prolongs survival against experi-mental brain tumors.Moreover,paracrine administration of interleukin-2(IL-2)has been shown to elicit apotent antitumor immune response and to improve survival in animal brain tumor models.We report the use of anovel polymeric microsphere delivery vehicle to release IL-2.We demonstrate both in vitro release of cytokinefrom the microspheres and histological evidence of the inflammatory response elicited by IL-2 released from themicrospheres in the rat brain.Thees microspheres are used to deliver IL-2,and biodegradable polymer wafers
