To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via ...To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via melt polycondensation.Diester monomers M and N were synthesized via the Williamson reaction,using lignin-derived 2-methoxyhydroquinone,methyl 4-chloromethylbenzoate,and methyl chloroacetate as starting materials.Hydroquinone bis(2-hydroxyethyl)ether(HQEE)and 1,4-cyclohexanedimethanol(CHDM)were employed as cyclic segments,while 1,4-butanediol(BDO)and 1,6-hexanediol(HDO)served as alkyl segments within the copolymer structures.The novel copolyesters exhibited molecular weights(Mw)in the range of 5.25×10^(4)–5.87×10^(4) g/mol,with polydispersity indices spanning from 2.50–2.66.Evaluation of the structural and thermomechanical properties indicated that the inclusion of alkyl segments induced a reduction in both crystallinity and molecular weight,while significantly improving the flexibility,whereas cyclic segments enhanced the processability of the copolyesters.Copolyesters P_(1) and P_(2),due to the presence of rigid segments(HQEE and CHDM),displayed relatively high glass transition temperatures(Tg>80℃)and melting temperatures(Tm>170℃).Notably,P_(2),incorporating CHDM,exhibited superior elongation properties(272%),attributed to the enhanced chain mobility resulting from its trans-conformation,while P_(1) was found to be likely brittle owing to excessive chain stiffness.Biodegradability assessment using earthworms as bioindicators revealed that the copolyesters demonstrated moderate degradation profiles,with P_(2) exhibiting a degradation rate of 4.82%,followed by P_(4) at 4.07%,P_(3) at 3.65%,and P_(1) at 3.17%.The higher degradation rate of P_(2) was attributed to its relatively larger d-spacing and lower toxicity,which facilitated enzymatic hydrolytic attack by microorganisms.These findings highlight the significance of optimizing the structural chain segments within aliphatic-aromatic copolyesters.By doing so,it is possible to significantly enhance their properties and performance,offering viable bio-based alternatives to petroleum-based polyesters such as polyethylene terephthalate(PET).展开更多
Background: Cosmetic formulations, and particularly solar products which contain mineral and chemical UV-filters, are often suspected of causing harmful effects on marine fauna and flora. After the publication of our ...Background: Cosmetic formulations, and particularly solar products which contain mineral and chemical UV-filters, are often suspected of causing harmful effects on marine fauna and flora. After the publication of our work in 2019 concerning the ecotoxicological effects of such formulations on corals (Seriatopora hystrix), we here provide some new information about the biodegradability and the ecotoxicological effects of these products on marine zoo- and phytoplankton. Therefore, we choose to realize in silico and in vitro studies of the biodegradability of several solar products but also to evaluate the ecotoxicological effects of these products on one phytoplankton, i.e. Phaeodactylum tricornutum, and one zooplankton, i.e. Acartia tonsa, of a great importance for sea species survival (notably as sources of food). Materials and methods: Two different approaches were used to study the biodegradability of the tested products: One in silico method and an in vitro one. 2 solar products were involved in the in silico study which consisted in the determination of the degradation factor (DF) of each ingredient of the tested formulas in order to finally obtain their estimated biodegradability percentage. Already available data concerning each ingredient coupled to a computer model developed with one of our partners were used to achieve this study. The in vitro study involved 8 formulas containing UV-filters and was led by following the OECD 301 F guidelines. Ecotoxicological studies of 7 of the formulas containing UV-filters were for their part realized by following the ISO 10253 guidelines for the experiments led with Phaeodactylum tricornutum, and the ISO 14669 guidelines for the experiments led with Acartia tonsa. In these studies, the effect of each tested product on crustaceans’ mortality and algal growth inhibition was assessed. Results: The in silico study predicted that formulas containing chemical UV-filters display a high biodegradability (superior to the threshold value of 60% given by the OECD 301 F guidelines). In the in vitro part of our work, the 8 tested formulas showed a biodegradability slightly inferior to the one predicted in the in silico experiments. Therefore, in order to evaluate if these calculated biodegradability value could have significant harmful effects on zoo- or phytoplankton, we studied the effect of our products regarding the growth inhibition on Phaeodactylum tricornutum and the mortality on Acartia tonsa. In this last part of the study, all the tested products were classified as “non ecotoxic” following an internal classification based on Part 4 entitled “Environmental Hazards” of Globally Harmonized System of Classification and Labelling of Chemicals (GHS), 9<sup>th</sup> edition (2021). Conclusions: These results are notably in line with those published by our teams in 2019 on the effects of solar cosmetic products on corals and seem to confirm that formulas containing mineral and chemical UV-filters can be daily used without displaying significant noxious effects on marine fauna and flora. .展开更多
Bioplastics were first introduced as environmentally friendly materials,with properties similar to those of conventional plastics.A bioplastic is defined as biodegradable if it can be decomposed into carbon dioxide un...Bioplastics were first introduced as environmentally friendly materials,with properties similar to those of conventional plastics.A bioplastic is defined as biodegradable if it can be decomposed into carbon dioxide under aerobic degradation,or methane and CO_(2)under anaerobic conditions,inorganic compounds,and new cellular biomass,by the action of naturally occurring microorganisms.This definition however does not provide any information on the environmental conditions,timescale and extent at which decomposition processes should occur.With regard to the aquatic environment,recognized standards have been established to assess the ability of plastics to undergo biodegradation;however,these standards fail to provide clear targets to be met to allow labelling of a bioplastic as biodegradable.Moreover,these standards grant the user an extensive leeway in the choice of process parameters.For these reasons,the comparison of results deriving from different studies is challenging.The authors analysed and discussed the degree of biodegradability of a series of biodegradable bioplastics in aquatic environments(both fresh and salt water)using the results obtained in the laboratory and from on-site testing in the context of different research studies.Biochemical Oxygen Demand(BOD),CO_(2)evolution,surface erosion and weight loss were the main parameters used by researchers to describe the percentage of biodegradation.The results showed a large variability both in weight loss and BOD,even when evaluating the same type of bioplastics.This confirms the need for a reference range of values to be established with regard to parameters applied in defining the biodegradability of bioplastics.展开更多
In this study,Mg-based composites,by the addition of ZnO,Ca_(2)ZnSi_(2)O_(7),Ca_(2)MgSi_(2)O_(7),and CaSiO_(3)as bioactive agents,were fabricated using friction stir processing.The microstructure and in vitro assessme...In this study,Mg-based composites,by the addition of ZnO,Ca_(2)ZnSi_(2)O_(7),Ca_(2)MgSi_(2)O_(7),and CaSiO_(3)as bioactive agents,were fabricated using friction stir processing.The microstructure and in vitro assessment of bioactivity,biodegradation rate,and corrosion behavior of the resultant composites were investigated in simulated body fluid(SBF).The results showed that during the immersion of composites in SBF for 28 d,due to the release of Ca^(2+)and PO_(4)^(3-)ions,hydroxyapatite(HA)crystals with cauliflower shaped morphology were deposited on the surface of composites,confirming good bioactivity of composites.In addition,due to the uniform distribution of bioceramic powders throughout Mg matrix,grain refinement of the Mg matrix,and uniform redistribution of secondary phase particles,the polarization resistance increased,and the biodegradation rate of composites significantly reduced compared to monolithic Mg matrix.The polarization corrosion resistance of Mg-ZnO increased from 0.216 to 2.499 kΩ/cm^(2)compared to monolithic Mg alloy.Additionally,Mg-ZnO composite with the weight loss of 0.0217 g after 28 d immersion showed lower weight loss compared to other samples with increasing immersion time.Moreover,Mg-ZnO composite with the biodegradation rate of 37.71 mm/a exhibited lower biodegradation rate compared to other samples with increasing immersion time.展开更多
To convert the non biodegradable sodium lignin sulfonate into biodegradable substances, the sodium lignin sulfonate in the water was ozonized and the pH value, dissolved organic carbon(DOC), ultraviolet absorbency at...To convert the non biodegradable sodium lignin sulfonate into biodegradable substances, the sodium lignin sulfonate in the water was ozonized and the pH value, dissolved organic carbon(DOC), ultraviolet absorbency at λ =254 nm(UVA) and the biodegradability of the ozonation effluent were measured. The non biodegradable sodium lignin sulfonate can be partly converted into biodegradable substances by ozonation (about 38 76%). In the ozonation process, there is little DOC decrease, but much UVA decrease and obvious pH drop.展开更多
Coal gasification effluent is a typical refractory industrial wastewater with a very poor anaerobic biodegradability due to its toxicity. Methanol was introduced to improve anaerobic biodegradability of real coal gasi...Coal gasification effluent is a typical refractory industrial wastewater with a very poor anaerobic biodegradability due to its toxicity. Methanol was introduced to improve anaerobic biodegradability of real coal gasification wastewater, and the effect of methanol addition on the performance was investigated in a mesophilic upflow anaerobic sludge bed reactor with a hydraulic retention time of 24 hr. Experimental results indicated that anaerobic treatment of coal gasification wastewater was feasible with the addition of methanol. The corresponding maximum COD and phenol removal rates were 71% and 75%, respectively, with methanol concentration of 500 mg COD/L for a total organic loading rate of 3.5 kg COD/（m^3.day） and a phenol loading rate of 0.6 kg/（m^3.day）. The phenol removal rate was not improved with a higher methanol concentration of 1000 mg COD/L. Substrate utilization rate （SUR） tests indicated that the SURs of phenol were 106, 132, and 83 mg phenol/（g VSS.day） at methanol concentrations of 250, 500, and 1000 mg COD/L, respectively, and only 45 mg phenol/（g VSS.day） in the control reactor. The presence of methanol could reduce the toxicity of coal gasification wastewater and increase the biodegradation of phenolic compounds.展开更多
The pretreatment of refractory polyvinyl-alcohol （PVA） wastewater with low value of CODcr by Fenton＇s reagent was investigated to enhance the biodegradabilily. The effects of operating conditions such as pH of the ...The pretreatment of refractory polyvinyl-alcohol （PVA） wastewater with low value of CODcr by Fenton＇s reagent was investigated to enhance the biodegradabilily. The effects of operating conditions such as pH of the solution, Fe2＋ dosage, H2O2 dosage, reaction time and initial PVA concentration on the removal efficiency of CODCr were discussed. It is demonstrated that the optimum value of pH for removal of CODcr is 5 and the most suitable dosages of H2O2 （2%） and FeSO4 （10 mg/L） are 5% and 8.0%, respectively. When the initial CODcr value of the PVA water is 760 mg/L, the favorable reaction time is 110 min. Under these optimum conditions, the removal ratio of CODcr is 58.6% 61.4%, and the value of biodegradability （CODB/CODcr） increases markedly from 8.9% 9.7% to 62.6% 68.3%.展开更多
As the characteristic pollutant, terephthalic acid(TA)was in charge of 40%—78% of the total COD of terylene artificial silk printing and dyeing wastewater(TPW-water). The studies on biodegradability of TA were conduc...As the characteristic pollutant, terephthalic acid(TA)was in charge of 40%—78% of the total COD of terylene artificial silk printing and dyeing wastewater(TPW-water). The studies on biodegradability of TA were conducted in a serial of activated sludge reactors with TPW-water. TA appeared to be readily biodegradable with removal efficiency over 96.5% under aerobic conditions, hardly biodegradable with removal efficiency below 10% under anoxic conditions and slowly biodegradable with a turnover between 31.4% and 56.0% under anaerobic conditions. TA also accounted for the majority of BOD in TPW-water. The process combined by anoxic, anaerobic and aerobic activated sludge reactor was suitable for TA degradation and TPW-water treatment. Further, the aerobic process was essentially much more effective than the anaerobic or anoxic one to degrade TA in TPW-water.展开更多
Water soluble organic carbon （WSOC） is considered the most mobile and reactive soil carbon source and its characterization is an important issue for soil ecology study. A biodegradability test was set up to study WS...Water soluble organic carbon （WSOC） is considered the most mobile and reactive soil carbon source and its characterization is an important issue for soil ecology study. A biodegradability test was set up to study WSOC extracted from 7 soils differently managed. WSOC was extracted from soil with water （soil/water ratio of 1：2, W/V） for 30 min, and then tested for biodegradability by a liquid state respirometric test. Result obtained confirmed the finding that WSOC biodegradability depended on the both land use and management practice. These results suggested the biodegradability test as suitable method to characterize WSOC, and provided useful information to soil fertility.展开更多
This study aims to investigate the addition of Zn on the corrosion property and cytocompatibility of Mg- 2Gd-xZn (x = 0, 3, 4 and 5;wt%) alloys, which were prepared by gravity permanent mold casting and solution treat...This study aims to investigate the addition of Zn on the corrosion property and cytocompatibility of Mg- 2Gd-xZn (x = 0, 3, 4 and 5;wt%) alloys, which were prepared by gravity permanent mold casting and solution treatment, respectively. The results show that the intermetallic phases of these ternary alloys are mainly composed of Mg12GdZn and Mg3GdZn3. The content of secondary phases as well as the grain size is greatly dependent on the Zn addition. Compared to the binary Mg- 2Gd alloy, the corrosion resistance of the most ternary alloys is significantly improved. Furthermore, the in vitro cell culture study demonstrates the potential cytocompatibility of the developed ternary alloys. It indicates that a series of Mg-2Gd-xZn (x = 0, 3, 4 and 5;wt%) with medically acceptable corrosion rate are developed and show great potential use as a new type of biodegradable implants.展开更多
The behavior of terephthalic acid (TPA) in anaerobic system has been studied bysemicontinuous bioassays under mesophilic condition with artificial TPA production wastewater. Theeffect of different loading rate of TPA ...The behavior of terephthalic acid (TPA) in anaerobic system has been studied bysemicontinuous bioassays under mesophilic condition with artificial TPA production wastewater. Theeffect of different loading rate of TPA on anaerobic digestion was studied under certain CODloading rate. The results showed that the TPA could be degraded anaerobically within a relativelylow range. The degradable concentration of TPA was less than 500 mg/L in the digester, higherconcentration of TPA could not be degraded totally and the rate of degradation might decrease withthe increase of feed amount. The inhibition is related to both loading rate and accumulatedconcentration of TPA in the digesters.展开更多
Using carbon tetrachloride （CCl4） as extraction agent, the activated sludge from Tianjin Jizhuangzi Sewage Treatment Plant as inoculum, the test study on biodegradability of lubricants was carried out. The test flas...Using carbon tetrachloride （CCl4） as extraction agent, the activated sludge from Tianjin Jizhuangzi Sewage Treatment Plant as inoculum, the test study on biodegradability of lubricants was carried out. The test flasks containing the mineral medium, the test oil and the inoculum were placed in incubation together with flasks containing poisoned blanks for periods of 0 and 21 days, respectively. Flasks containing the reference materials in place of the test oil were run in parallel. At the end of the incubation period, the contents of the flasks were subjected to sonic vibration, and were acidified and extracted by using CCI4. The extracts were then analysed by infra-red （IR） spectrometer to measure the maximum absorption of the C-H stretch of CH2-CH3 band at wavelength of 2 930 cm^-1. The absorption values were used to calculate the residual oil contents of the poisoned and test flasks. Consequently the biodegradability of the test oil was calculated. The test results indicate that the differences in the biodegradability of test materials in different tests are within 5.5%, and consistent with the data described in Coordinating European Council （CEC） L-33- A-93. The biodegradability of lubricants can be evaluated by this method effectively.展开更多
Evaluating anaerobic biodegradability of sludge and then identifying the stabilization of digestate is necessary in sludge treatment and disposal.48 sludge samples from 24 typical waste water treatment plants(WWTPs)in...Evaluating anaerobic biodegradability of sludge and then identifying the stabilization of digestate is necessary in sludge treatment and disposal.48 sludge samples from 24 typical waste water treatment plants(WWTPs)in 11 provinces in China were selected to investigate the relationship between Biochemical Acidogenic Potential(BAP)test and Biochemical Methane Potential(BMP)test.The volatile fatty acid(VFA)production obtained from BAP tests was found linearly related to the ultimate methane production from corresponding BMP tests.Satisfying results were obtained with Pearson correlation coefficient as 0.929 and R^2 value as 0.76.Furthermore,the physio-chemical characteristics(FCI,SUVA254,E 4/E 6)of supernatant,which were associated with humic-like substances(HS),were investigated before and after BMP tests.Through which a new criterion(FCI>1.50,SUVA 254>1.10,E 4/E 6<4.0)was proposed to evaluate the stabilization level of anaerobic digested sludge.展开更多
The biodegradability and biocompatibility of porous Mg-2Zn（mass fraction, %） scaffolds coated with nano hydroxyapatite（HAP） were investigated. The nano HAP coating on Mg-2Zn scaffolds was prepared by the pulse ele...The biodegradability and biocompatibility of porous Mg-2Zn（mass fraction, %） scaffolds coated with nano hydroxyapatite（HAP） were investigated. The nano HAP coating on Mg-2Zn scaffolds was prepared by the pulse electrodeposition method. The as-deposited scaffolds were then post-treated with alkaline solution to improve the biodegradation behavior and biocompatibility for implant applications. The microstructure and composition of scaffold and nano HAP coating, as well as their degradation and cytotoxicity behavior in simulated body fluid（SBF） were investigated. The post-treated coating is composed of needle-like HAP with the diameter less than 100 nm developed almost perpendicularly to the substrate, which exhibits a similar composition to natural bone. It is found that the products of immersion in SBF are identified to be HAP,（Ca,Mg）3（PO4）2 and Mg（OH）2. The bioactivity, biocompatibility and cell viabilities for the as-coated and post-treated scaffold extracts are higher than those for the uncoated scaffold. MG63 cells are found to adhere and proliferate on the surface of the as-coated and post-treated scaffolds, making it a promising choice for medical application. The results show that the pulse electrodeposition of nano HAP coating and alkaline treatment is a useful approach to improve the biodegradability and bioactivity of porous Mg-Zn scaffolds.展开更多
The method of enhancing the biodegradability of landfill leachate via air stripping followed by coagulation/ultrafiltration （UF） processes is introduced. In this study, the air stripping process obtained a removal e...The method of enhancing the biodegradability of landfill leachate via air stripping followed by coagulation/ultrafiltration （UF） processes is introduced. In this study, the air stripping process obtained a removal efficiency of 88.6% for ammonia nitrogen （NH3-N）, at an air-to-liquid ratio （A/L） of 3 300 （pH = 11） and after 18 h of stripping. The single coagulation process increased the BOD （biological oxygen demand）/COD （chemical oxygen demand） ratio by 0.089 with a FeCl3 dosage of 570 mg/L, at pH 7.0, and the single UF process increased the BOD/COD ratio from 0.049 to 0.311. However, the combination of coagulation and UF increased the BOD/COD ratio from 0.049 to 0.423, and the final BOD, COD, NH3-N, and colour of the leachate were 1 023 mg/L, 2 845 mg/L, 145 mg/L, and 2 056, respectively, when a 3 kDa molecular weight cut-off （MWCO） membrane was used at an operating pressure of 0.7 MPa. In the ultrafiltration process, the average solution flux （Jv）, concentration multiple （Mc）, and retention rate （R） for the COD were 107.3 L/（m^2·h）, 6.3, and 84.2%, respectively.展开更多
Objective To identify the bacteria tolerating chlorinated anilines and to study the biodegradability of o-chloroaniline and its coexistent compounds. Methods Microbial community of complex bacteria was identified by p...Objective To identify the bacteria tolerating chlorinated anilines and to study the biodegradability of o-chloroaniline and its coexistent compounds. Methods Microbial community of complex bacteria was identified by plate culture observation techniques and Gram stain method. Bacterial growth inhibition test was used to determine the tolerance of complex bacteria to toxicant. Biodegradability of chlorinated anilines was determined using domesticated complex bacteria as an inoculum by shaking-flask test. Results The complex bacteria were identified, consisting of Xanthomonas, Bacillus alcaligenes, Acinetobacter, Pseudomonas, and Actinomycetaceae nocardia. The obtained complex bacteria were more tolerant to o-chloroaniline than mixture bacteria in natural river waters. The effects of exposure concentration and inoculum size on the biodegradability of o-chloroaniline were analyzed, and the biodegradation characteristics of single o-chloroaniline and 2, 4-dichloroaniline were compared with the coexistent compounds. Conclusion The biodegradation rates can be improved by decreasing concentration of compounds and increasing inoculum size of complex bacteria. When o-chloroaniline coexists with aniline, the latter is biodegraded prior to the former, and as a consequence the metabolic efficiency of o-chloroaniline is improved with the increase of aniline concentration. Meanwhile, when o-chloroaniline coexists with 2,4-dichloroaniline, the metabolic efficiency of 2,4-dichloroaniline is markedly improved.展开更多
To study the correlation of toxicity with biodegradability （BODT） in order to promote QSBR development and understand the degradation mechanism. Methods Toxicity of substituted phenols to river bacteria was determin...To study the correlation of toxicity with biodegradability （BODT） in order to promote QSBR development and understand the degradation mechanism. Methods Toxicity of substituted phenols to river bacteria was determined by the turbidities that were measured using a spectrophotometer （UV-190） at 530 nm against a blank control. The biodegradability of substituted phenols was expressed as BODT and the DO concentrations were determined by the iodometric titration method. Results The BODT and toxicity（log 1/IC50） of 12 substituted phenols to bacteria from the Songhua River were determined respectively. The correlation of biodegradability with toxicity was developed： BODT=8.21 （±2.22） pKa -32.44 （±8.28） log 1/IC50 ＋89.04 （±38.20）, n=12, R^2=0.791, R^2（adj）=0.745, SE=9.134, F=17.066, P=0.001. Conclusion The BODT of substituted phenols was influenced by their toxicity and the ionization constant pKa. The stronger the toxicity, the less readily the compound was degraded by river bacteria.展开更多
The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of...The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of leachates during storage or landfilling. Leachates ingredients determine the appropriate treatment technique. MSW compositions of the two cities Guilin (China) and Essen (Germany), each with approx. 600 000 inhabitants, are used to simulate Chinese and German MSW types. A sequencing batch reactor (SBR) is used, combining aerobic and anaerobic reaction principles, to test the biodegradability of leachates. Leachates are tested for temperature, pH-value, redox potentials, and oxygen concentration. Chemical oxygen demand (COD) values are determined. Within 8 h, the biodegradation rates for both kinds of leachates are more than 90%. Due to the high organic content of Chinese waste, the degradation rate for Guilin MSW leachate is even higher, up to 97%. The effluent from SBR technique is suitable for direct discharge into bodies of water.展开更多
The influence of synthetic caprylic methyl diethanolamine phosphate ester (abbreviated as MDEACP) on biodegradability and tribological properties of 400SN mineral base oil was studied. The biodegradability of the neat...The influence of synthetic caprylic methyl diethanolamine phosphate ester (abbreviated as MDEACP) on biodegradability and tribological properties of 400SN mineral base oil was studied. The biodegradability of the neat base oil and the oil doped with MDEACP was determined on a biodegradation tester. The tribological properties of the neat base oil and the oil doped with MDEACP were evaluated on a four-ball tester. Moreover, the worn surfaces were investigated by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results revealed that MDEACP significantly promoted the biodegradation of the mineral base oil. The improvement in biodegradability was attributed to the enhanced growth and quantity of microbes by MDEACP. Furthermore, MDEACP enhanced the anti-wear properties, the friction-reducing properties, and the extreme pressure properties of the base oil. It was mainly attributed to the formation of the complex boundary lubrication film resulted from the adsorption and tribochemical reactions of MDEACP on the friction surface.展开更多
21 Physicochemical and quantum chemical parameters of 17 kinds of polycyclic aromatic hydrocarbons were calculated by using semi-empirical MOPAC AM1 method. By means of Partial Least Squares （PLS）, quantitative stru...21 Physicochemical and quantum chemical parameters of 17 kinds of polycyclic aromatic hydrocarbons were calculated by using semi-empirical MOPAC AM1 method. By means of Partial Least Squares （PLS）, quantitative structure-biodegradation relationship （QSBR） study was performed with the logarithm of specific biodegradation rates （logKb）. The optimal model was obtained, and the result showed that the first-order molecular connectivity index （^1X）, the energy of the lowest unoccupied molecular orbital （Elumo）, logarithm of n-octyl alcohol/water partition coefficient （logP） and torsion energy （Et） are the dominant factors governing the biodegradability of polyeyelie aromatic hydrocarbons, and the effect of second-order valence molecular connectivity index （^2X^V）, the third-order valence molecular connectivity index （^3X^V） and molar refractivity （Rm） should not be ignored.展开更多
基金financially supported by State Administration of Foreign Experts Affairs(SAFEA)through the High-End Foreign Expert Program(No.BG2021227001)postdoctoral funding from Wuhan University of Science and Technology(No.105008701)。
文摘To enhance the properties of bio-based polyesters,enabling them to more closely mimic the characteristics of terephthalate-based materials,a series of aliphatic-aromatic copolyesters(P_(1)–P_(4))were synthesized via melt polycondensation.Diester monomers M and N were synthesized via the Williamson reaction,using lignin-derived 2-methoxyhydroquinone,methyl 4-chloromethylbenzoate,and methyl chloroacetate as starting materials.Hydroquinone bis(2-hydroxyethyl)ether(HQEE)and 1,4-cyclohexanedimethanol(CHDM)were employed as cyclic segments,while 1,4-butanediol(BDO)and 1,6-hexanediol(HDO)served as alkyl segments within the copolymer structures.The novel copolyesters exhibited molecular weights(Mw)in the range of 5.25×10^(4)–5.87×10^(4) g/mol,with polydispersity indices spanning from 2.50–2.66.Evaluation of the structural and thermomechanical properties indicated that the inclusion of alkyl segments induced a reduction in both crystallinity and molecular weight,while significantly improving the flexibility,whereas cyclic segments enhanced the processability of the copolyesters.Copolyesters P_(1) and P_(2),due to the presence of rigid segments(HQEE and CHDM),displayed relatively high glass transition temperatures(Tg>80℃)and melting temperatures(Tm>170℃).Notably,P_(2),incorporating CHDM,exhibited superior elongation properties(272%),attributed to the enhanced chain mobility resulting from its trans-conformation,while P_(1) was found to be likely brittle owing to excessive chain stiffness.Biodegradability assessment using earthworms as bioindicators revealed that the copolyesters demonstrated moderate degradation profiles,with P_(2) exhibiting a degradation rate of 4.82%,followed by P_(4) at 4.07%,P_(3) at 3.65%,and P_(1) at 3.17%.The higher degradation rate of P_(2) was attributed to its relatively larger d-spacing and lower toxicity,which facilitated enzymatic hydrolytic attack by microorganisms.These findings highlight the significance of optimizing the structural chain segments within aliphatic-aromatic copolyesters.By doing so,it is possible to significantly enhance their properties and performance,offering viable bio-based alternatives to petroleum-based polyesters such as polyethylene terephthalate(PET).
文摘Background: Cosmetic formulations, and particularly solar products which contain mineral and chemical UV-filters, are often suspected of causing harmful effects on marine fauna and flora. After the publication of our work in 2019 concerning the ecotoxicological effects of such formulations on corals (Seriatopora hystrix), we here provide some new information about the biodegradability and the ecotoxicological effects of these products on marine zoo- and phytoplankton. Therefore, we choose to realize in silico and in vitro studies of the biodegradability of several solar products but also to evaluate the ecotoxicological effects of these products on one phytoplankton, i.e. Phaeodactylum tricornutum, and one zooplankton, i.e. Acartia tonsa, of a great importance for sea species survival (notably as sources of food). Materials and methods: Two different approaches were used to study the biodegradability of the tested products: One in silico method and an in vitro one. 2 solar products were involved in the in silico study which consisted in the determination of the degradation factor (DF) of each ingredient of the tested formulas in order to finally obtain their estimated biodegradability percentage. Already available data concerning each ingredient coupled to a computer model developed with one of our partners were used to achieve this study. The in vitro study involved 8 formulas containing UV-filters and was led by following the OECD 301 F guidelines. Ecotoxicological studies of 7 of the formulas containing UV-filters were for their part realized by following the ISO 10253 guidelines for the experiments led with Phaeodactylum tricornutum, and the ISO 14669 guidelines for the experiments led with Acartia tonsa. In these studies, the effect of each tested product on crustaceans’ mortality and algal growth inhibition was assessed. Results: The in silico study predicted that formulas containing chemical UV-filters display a high biodegradability (superior to the threshold value of 60% given by the OECD 301 F guidelines). In the in vitro part of our work, the 8 tested formulas showed a biodegradability slightly inferior to the one predicted in the in silico experiments. Therefore, in order to evaluate if these calculated biodegradability value could have significant harmful effects on zoo- or phytoplankton, we studied the effect of our products regarding the growth inhibition on Phaeodactylum tricornutum and the mortality on Acartia tonsa. In this last part of the study, all the tested products were classified as “non ecotoxic” following an internal classification based on Part 4 entitled “Environmental Hazards” of Globally Harmonized System of Classification and Labelling of Chemicals (GHS), 9<sup>th</sup> edition (2021). Conclusions: These results are notably in line with those published by our teams in 2019 on the effects of solar cosmetic products on corals and seem to confirm that formulas containing mineral and chemical UV-filters can be daily used without displaying significant noxious effects on marine fauna and flora. .
文摘Bioplastics were first introduced as environmentally friendly materials,with properties similar to those of conventional plastics.A bioplastic is defined as biodegradable if it can be decomposed into carbon dioxide under aerobic degradation,or methane and CO_(2)under anaerobic conditions,inorganic compounds,and new cellular biomass,by the action of naturally occurring microorganisms.This definition however does not provide any information on the environmental conditions,timescale and extent at which decomposition processes should occur.With regard to the aquatic environment,recognized standards have been established to assess the ability of plastics to undergo biodegradation;however,these standards fail to provide clear targets to be met to allow labelling of a bioplastic as biodegradable.Moreover,these standards grant the user an extensive leeway in the choice of process parameters.For these reasons,the comparison of results deriving from different studies is challenging.The authors analysed and discussed the degree of biodegradability of a series of biodegradable bioplastics in aquatic environments(both fresh and salt water)using the results obtained in the laboratory and from on-site testing in the context of different research studies.Biochemical Oxygen Demand(BOD),CO_(2)evolution,surface erosion and weight loss were the main parameters used by researchers to describe the percentage of biodegradation.The results showed a large variability both in weight loss and BOD,even when evaluating the same type of bioplastics.This confirms the need for a reference range of values to be established with regard to parameters applied in defining the biodegradability of bioplastics.
文摘In this study,Mg-based composites,by the addition of ZnO,Ca_(2)ZnSi_(2)O_(7),Ca_(2)MgSi_(2)O_(7),and CaSiO_(3)as bioactive agents,were fabricated using friction stir processing.The microstructure and in vitro assessment of bioactivity,biodegradation rate,and corrosion behavior of the resultant composites were investigated in simulated body fluid(SBF).The results showed that during the immersion of composites in SBF for 28 d,due to the release of Ca^(2+)and PO_(4)^(3-)ions,hydroxyapatite(HA)crystals with cauliflower shaped morphology were deposited on the surface of composites,confirming good bioactivity of composites.In addition,due to the uniform distribution of bioceramic powders throughout Mg matrix,grain refinement of the Mg matrix,and uniform redistribution of secondary phase particles,the polarization resistance increased,and the biodegradation rate of composites significantly reduced compared to monolithic Mg matrix.The polarization corrosion resistance of Mg-ZnO increased from 0.216 to 2.499 kΩ/cm^(2)compared to monolithic Mg alloy.Additionally,Mg-ZnO composite with the weight loss of 0.0217 g after 28 d immersion showed lower weight loss compared to other samples with increasing immersion time.Moreover,Mg-ZnO composite with the biodegradation rate of 37.71 mm/a exhibited lower biodegradation rate compared to other samples with increasing immersion time.
文摘To convert the non biodegradable sodium lignin sulfonate into biodegradable substances, the sodium lignin sulfonate in the water was ozonized and the pH value, dissolved organic carbon(DOC), ultraviolet absorbency at λ =254 nm(UVA) and the biodegradability of the ozonation effluent were measured. The non biodegradable sodium lignin sulfonate can be partly converted into biodegradable substances by ozonation (about 38 76%). In the ozonation process, there is little DOC decrease, but much UVA decrease and obvious pH drop.
基金supported by the State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology(No. 2010DX05)the National High Technology Research and Development Program(863) of China(No. 2007AA06A411)
文摘Coal gasification effluent is a typical refractory industrial wastewater with a very poor anaerobic biodegradability due to its toxicity. Methanol was introduced to improve anaerobic biodegradability of real coal gasification wastewater, and the effect of methanol addition on the performance was investigated in a mesophilic upflow anaerobic sludge bed reactor with a hydraulic retention time of 24 hr. Experimental results indicated that anaerobic treatment of coal gasification wastewater was feasible with the addition of methanol. The corresponding maximum COD and phenol removal rates were 71% and 75%, respectively, with methanol concentration of 500 mg COD/L for a total organic loading rate of 3.5 kg COD/（m^3.day） and a phenol loading rate of 0.6 kg/（m^3.day）. The phenol removal rate was not improved with a higher methanol concentration of 1000 mg COD/L. Substrate utilization rate （SUR） tests indicated that the SURs of phenol were 106, 132, and 83 mg phenol/（g VSS.day） at methanol concentrations of 250, 500, and 1000 mg COD/L, respectively, and only 45 mg phenol/（g VSS.day） in the control reactor. The presence of methanol could reduce the toxicity of coal gasification wastewater and increase the biodegradation of phenolic compounds.
基金Project(08JCYBJC02600) supported by the Natural Science Foundation of Tianjin,ChinaProject(2008ZX07314-005-011) supported by the National Major Technological Program of China
文摘The pretreatment of refractory polyvinyl-alcohol （PVA） wastewater with low value of CODcr by Fenton＇s reagent was investigated to enhance the biodegradabilily. The effects of operating conditions such as pH of the solution, Fe2＋ dosage, H2O2 dosage, reaction time and initial PVA concentration on the removal efficiency of CODCr were discussed. It is demonstrated that the optimum value of pH for removal of CODcr is 5 and the most suitable dosages of H2O2 （2%） and FeSO4 （10 mg/L） are 5% and 8.0%, respectively. When the initial CODcr value of the PVA water is 760 mg/L, the favorable reaction time is 110 min. Under these optimum conditions, the removal ratio of CODcr is 58.6% 61.4%, and the value of biodegradability （CODB/CODcr） increases markedly from 8.9% 9.7% to 62.6% 68.3%.
文摘As the characteristic pollutant, terephthalic acid(TA)was in charge of 40%—78% of the total COD of terylene artificial silk printing and dyeing wastewater(TPW-water). The studies on biodegradability of TA were conducted in a serial of activated sludge reactors with TPW-water. TA appeared to be readily biodegradable with removal efficiency over 96.5% under aerobic conditions, hardly biodegradable with removal efficiency below 10% under anoxic conditions and slowly biodegradable with a turnover between 31.4% and 56.0% under anaerobic conditions. TA also accounted for the majority of BOD in TPW-water. The process combined by anoxic, anaerobic and aerobic activated sludge reactor was suitable for TA degradation and TPW-water treatment. Further, the aerobic process was essentially much more effective than the anaerobic or anoxic one to degrade TA in TPW-water.
文摘Water soluble organic carbon （WSOC） is considered the most mobile and reactive soil carbon source and its characterization is an important issue for soil ecology study. A biodegradability test was set up to study WSOC extracted from 7 soils differently managed. WSOC was extracted from soil with water （soil/water ratio of 1：2, W/V） for 30 min, and then tested for biodegradability by a liquid state respirometric test. Result obtained confirmed the finding that WSOC biodegradability depended on the both land use and management practice. These results suggested the biodegradability test as suitable method to characterize WSOC, and provided useful information to soil fertility.
基金financially supported by the National Natural Science Foundation of China (Nos. 31300808 and 31400815)the Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (No. 201417)the Natural Science Foundation of Shanxi Province (No. 2013021011-1)
文摘This study aims to investigate the addition of Zn on the corrosion property and cytocompatibility of Mg- 2Gd-xZn (x = 0, 3, 4 and 5;wt%) alloys, which were prepared by gravity permanent mold casting and solution treatment, respectively. The results show that the intermetallic phases of these ternary alloys are mainly composed of Mg12GdZn and Mg3GdZn3. The content of secondary phases as well as the grain size is greatly dependent on the Zn addition. Compared to the binary Mg- 2Gd alloy, the corrosion resistance of the most ternary alloys is significantly improved. Furthermore, the in vitro cell culture study demonstrates the potential cytocompatibility of the developed ternary alloys. It indicates that a series of Mg-2Gd-xZn (x = 0, 3, 4 and 5;wt%) with medically acceptable corrosion rate are developed and show great potential use as a new type of biodegradable implants.
文摘The behavior of terephthalic acid (TPA) in anaerobic system has been studied bysemicontinuous bioassays under mesophilic condition with artificial TPA production wastewater. Theeffect of different loading rate of TPA on anaerobic digestion was studied under certain CODloading rate. The results showed that the TPA could be degraded anaerobically within a relativelylow range. The degradable concentration of TPA was less than 500 mg/L in the digester, higherconcentration of TPA could not be degraded totally and the rate of degradation might decrease withthe increase of feed amount. The inhibition is related to both loading rate and accumulatedconcentration of TPA in the digesters.
基金China Petroleum & Chemical Corporation (No. 104141)
文摘Using carbon tetrachloride （CCl4） as extraction agent, the activated sludge from Tianjin Jizhuangzi Sewage Treatment Plant as inoculum, the test study on biodegradability of lubricants was carried out. The test flasks containing the mineral medium, the test oil and the inoculum were placed in incubation together with flasks containing poisoned blanks for periods of 0 and 21 days, respectively. Flasks containing the reference materials in place of the test oil were run in parallel. At the end of the incubation period, the contents of the flasks were subjected to sonic vibration, and were acidified and extracted by using CCI4. The extracts were then analysed by infra-red （IR） spectrometer to measure the maximum absorption of the C-H stretch of CH2-CH3 band at wavelength of 2 930 cm^-1. The absorption values were used to calculate the residual oil contents of the poisoned and test flasks. Consequently the biodegradability of the test oil was calculated. The test results indicate that the differences in the biodegradability of test materials in different tests are within 5.5%, and consistent with the data described in Coordinating European Council （CEC） L-33- A-93. The biodegradability of lubricants can be evaluated by this method effectively.
基金Shanghai Technology Leader Program(No.17XD1420500)National Key R&D Program of China(No.2018YFC1900905)。
文摘Evaluating anaerobic biodegradability of sludge and then identifying the stabilization of digestate is necessary in sludge treatment and disposal.48 sludge samples from 24 typical waste water treatment plants(WWTPs)in 11 provinces in China were selected to investigate the relationship between Biochemical Acidogenic Potential(BAP)test and Biochemical Methane Potential(BMP)test.The volatile fatty acid(VFA)production obtained from BAP tests was found linearly related to the ultimate methane production from corresponding BMP tests.Satisfying results were obtained with Pearson correlation coefficient as 0.929 and R^2 value as 0.76.Furthermore,the physio-chemical characteristics(FCI,SUVA254,E 4/E 6)of supernatant,which were associated with humic-like substances(HS),were investigated before and after BMP tests.Through which a new criterion(FCI>1.50,SUVA 254>1.10,E 4/E 6<4.0)was proposed to evaluate the stabilization level of anaerobic digested sludge.
文摘The biodegradability and biocompatibility of porous Mg-2Zn（mass fraction, %） scaffolds coated with nano hydroxyapatite（HAP） were investigated. The nano HAP coating on Mg-2Zn scaffolds was prepared by the pulse electrodeposition method. The as-deposited scaffolds were then post-treated with alkaline solution to improve the biodegradation behavior and biocompatibility for implant applications. The microstructure and composition of scaffold and nano HAP coating, as well as their degradation and cytotoxicity behavior in simulated body fluid（SBF） were investigated. The post-treated coating is composed of needle-like HAP with the diameter less than 100 nm developed almost perpendicularly to the substrate, which exhibits a similar composition to natural bone. It is found that the products of immersion in SBF are identified to be HAP,（Ca,Mg）3（PO4）2 and Mg（OH）2. The bioactivity, biocompatibility and cell viabilities for the as-coated and post-treated scaffold extracts are higher than those for the uncoated scaffold. MG63 cells are found to adhere and proliferate on the surface of the as-coated and post-treated scaffolds, making it a promising choice for medical application. The results show that the pulse electrodeposition of nano HAP coating and alkaline treatment is a useful approach to improve the biodegradability and bioactivity of porous Mg-Zn scaffolds.
文摘The method of enhancing the biodegradability of landfill leachate via air stripping followed by coagulation/ultrafiltration （UF） processes is introduced. In this study, the air stripping process obtained a removal efficiency of 88.6% for ammonia nitrogen （NH3-N）, at an air-to-liquid ratio （A/L） of 3 300 （pH = 11） and after 18 h of stripping. The single coagulation process increased the BOD （biological oxygen demand）/COD （chemical oxygen demand） ratio by 0.089 with a FeCl3 dosage of 570 mg/L, at pH 7.0, and the single UF process increased the BOD/COD ratio from 0.049 to 0.311. However, the combination of coagulation and UF increased the BOD/COD ratio from 0.049 to 0.423, and the final BOD, COD, NH3-N, and colour of the leachate were 1 023 mg/L, 2 845 mg/L, 145 mg/L, and 2 056, respectively, when a 3 kDa molecular weight cut-off （MWCO） membrane was used at an operating pressure of 0.7 MPa. In the ultrafiltration process, the average solution flux （Jv）, concentration multiple （Mc）, and retention rate （R） for the COD were 107.3 L/（m^2·h）, 6.3, and 84.2%, respectively.
基金This work was supported by the National Natural Science Foundation of China (No. 50379012)Program for New Century Excellent Talents in University (No. 05-0481).
文摘Objective To identify the bacteria tolerating chlorinated anilines and to study the biodegradability of o-chloroaniline and its coexistent compounds. Methods Microbial community of complex bacteria was identified by plate culture observation techniques and Gram stain method. Bacterial growth inhibition test was used to determine the tolerance of complex bacteria to toxicant. Biodegradability of chlorinated anilines was determined using domesticated complex bacteria as an inoculum by shaking-flask test. Results The complex bacteria were identified, consisting of Xanthomonas, Bacillus alcaligenes, Acinetobacter, Pseudomonas, and Actinomycetaceae nocardia. The obtained complex bacteria were more tolerant to o-chloroaniline than mixture bacteria in natural river waters. The effects of exposure concentration and inoculum size on the biodegradability of o-chloroaniline were analyzed, and the biodegradation characteristics of single o-chloroaniline and 2, 4-dichloroaniline were compared with the coexistent compounds. Conclusion The biodegradation rates can be improved by decreasing concentration of compounds and increasing inoculum size of complex bacteria. When o-chloroaniline coexists with aniline, the latter is biodegraded prior to the former, and as a consequence the metabolic efficiency of o-chloroaniline is improved with the increase of aniline concentration. Meanwhile, when o-chloroaniline coexists with 2,4-dichloroaniline, the metabolic efficiency of 2,4-dichloroaniline is markedly improved.
基金This research was supported by the Science Foundation of Education Ministry of China (No. 03058) and Science Foundation for YoungTeachers of Northeast Normal University (No. 20050503).
文摘To study the correlation of toxicity with biodegradability （BODT） in order to promote QSBR development and understand the degradation mechanism. Methods Toxicity of substituted phenols to river bacteria was determined by the turbidities that were measured using a spectrophotometer （UV-190） at 530 nm against a blank control. The biodegradability of substituted phenols was expressed as BODT and the DO concentrations were determined by the iodometric titration method. Results The BODT and toxicity（log 1/IC50） of 12 substituted phenols to bacteria from the Songhua River were determined respectively. The correlation of biodegradability with toxicity was developed： BODT=8.21 （±2.22） pKa -32.44 （±8.28） log 1/IC50 ＋89.04 （±38.20）, n=12, R^2=0.791, R^2（adj）=0.745, SE=9.134, F=17.066, P=0.001. Conclusion The BODT of substituted phenols was influenced by their toxicity and the ionization constant pKa. The stronger the toxicity, the less readily the compound was degraded by river bacteria.
基金Project supported by German Ministries of the State North Rhine-Westphalia
文摘The quantitative and qualitative composition of Chinese municipal solid waste (MSW) differs significantly from German waste. The focus of this paper is on whether these differences also lead to dissimilar qualities of leachates during storage or landfilling. Leachates ingredients determine the appropriate treatment technique. MSW compositions of the two cities Guilin (China) and Essen (Germany), each with approx. 600 000 inhabitants, are used to simulate Chinese and German MSW types. A sequencing batch reactor (SBR) is used, combining aerobic and anaerobic reaction principles, to test the biodegradability of leachates. Leachates are tested for temperature, pH-value, redox potentials, and oxygen concentration. Chemical oxygen demand (COD) values are determined. Within 8 h, the biodegradation rates for both kinds of leachates are more than 90%. Due to the high organic content of Chinese waste, the degradation rate for Guilin MSW leachate is even higher, up to 97%. The effluent from SBR technique is suitable for direct discharge into bodies of water.
基金financial support from the National Defense Science Technology Foundation (Project No.3604003)the National Natural Science Foundation of China (Project No.51375491)+2 种基金the Natural Science Foundation of Chongqing (Project No. CSTC, 2014JCYJAA50021)the Postgraduate Research and the Innovation Project of Chongqing (No. CYB 18128)the Natural Science Foundation of Chongqing (Project No. CSTC, 2017JCYJAX0058)
文摘The influence of synthetic caprylic methyl diethanolamine phosphate ester (abbreviated as MDEACP) on biodegradability and tribological properties of 400SN mineral base oil was studied. The biodegradability of the neat base oil and the oil doped with MDEACP was determined on a biodegradation tester. The tribological properties of the neat base oil and the oil doped with MDEACP were evaluated on a four-ball tester. Moreover, the worn surfaces were investigated by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The results revealed that MDEACP significantly promoted the biodegradation of the mineral base oil. The improvement in biodegradability was attributed to the enhanced growth and quantity of microbes by MDEACP. Furthermore, MDEACP enhanced the anti-wear properties, the friction-reducing properties, and the extreme pressure properties of the base oil. It was mainly attributed to the formation of the complex boundary lubrication film resulted from the adsorption and tribochemical reactions of MDEACP on the friction surface.
基金supported by the Natural Science Foundation of Fujian Province (D0710019)the Natural Science Foundation of Overseas Chinese Affairs Office of the State Council (06QZR09)
文摘21 Physicochemical and quantum chemical parameters of 17 kinds of polycyclic aromatic hydrocarbons were calculated by using semi-empirical MOPAC AM1 method. By means of Partial Least Squares （PLS）, quantitative structure-biodegradation relationship （QSBR） study was performed with the logarithm of specific biodegradation rates （logKb）. The optimal model was obtained, and the result showed that the first-order molecular connectivity index （^1X）, the energy of the lowest unoccupied molecular orbital （Elumo）, logarithm of n-octyl alcohol/water partition coefficient （logP） and torsion energy （Et） are the dominant factors governing the biodegradability of polyeyelie aromatic hydrocarbons, and the effect of second-order valence molecular connectivity index （^2X^V）, the third-order valence molecular connectivity index （^3X^V） and molar refractivity （Rm） should not be ignored.
