The four-dimensional(4D) printing technology, as a combination of additive manufacturing and smart materials, has attracted increasing research interest in recent years. The bilayer structures printed with smart mater...The four-dimensional(4D) printing technology, as a combination of additive manufacturing and smart materials, has attracted increasing research interest in recent years. The bilayer structures printed with smart materials using this technology can realize complicated deformation under some special stimuli due to the material properties.The deformation prediction of bilayer structures can make the design process more rapid and thus is of great importance. However, the previous works on deformation prediction of bilayer structures rarely study the complicated deformations or the influence of the printing process on deformation. Thus, this paper proposes a new method to predict the complicated deformations of temperature-sensitive 4D printed bilayer structures,in particular to the bilayer structures based on temperature-driven shape-memory polymers(SMPs) and fabricated using the fused deposition modeling(FDM) technology. The programming process to the material during printing is revealed and considered in the simulation model. Simulation results are compared with experiments to verify the validity of the method. The advantages of this method are stable convergence and high efficiency,as the three-dimensional(3D) problem is converted to a two-dimensional(2D) problem.The simulation parameters in the model can be further associated with the printing parameters, which shows good application prospect in 4D printed bilayer structure design.展开更多
First-principle calculations with different exchange-correlation functionals, including LDA, PBE, and vd W-DF functional in the form of opt B88-vd W, have been performed to investigate the electronic and elastic prope...First-principle calculations with different exchange-correlation functionals, including LDA, PBE, and vd W-DF functional in the form of opt B88-vd W, have been performed to investigate the electronic and elastic properties of twodimensional transition metal dichalcogenides（TMDCs） with the formula of MX2（M = Mo, W; X = O, S, Se, Te） in both monolayer and bilayer structures. The calculated band structures show a direct band gap for monolayer TMDCs at the K point except for MoO2 and WO2. When the monolayers are stacked into a bilayer, the reduced indirect band gaps are found except for bilayer WTe2, in which the direct gap is still present at the K point. The calculated in-plane Young moduli are comparable to that of graphene, which promises possible application of TMDCs in future flexible and stretchable electronic devices. We also evaluated the performance of different functionals including LDA, PBE, and opt B88-vd W in describing elastic moduli of TMDCs and found that LDA seems to be the most qualified method. Moreover, our calculations suggest that the Young moduli for bilayers are insensitive to stacking orders and the mechanical coupling between monolayers seems to be negligible.展开更多
A bilayer nano-stanene-like structure with Ruderman-Kittel-Kasuya-Yoshida(RKKY)coupling described by the Ising model is proposed. The magnetic and thermodynamic properties are studied using the effective-field theory ...A bilayer nano-stanene-like structure with Ruderman-Kittel-Kasuya-Yoshida(RKKY)coupling described by the Ising model is proposed. The magnetic and thermodynamic properties are studied using the effective-field theory with correlations. The exchange coupling,longitudinal magnetic field, number of non-magnetic layers, and anisotropies had major influences on the magnetization, specific heat, and internal energy. Different saturation magnetizations are observed on the magnetization curve. The variation in the system blocking temperature is studied. The results provide theoretical guidance for the magnetic investigation of nanomaterials with RKKY coupling.展开更多
The aim of this work was to develop a Ti6Al4V/20CoCrMo−highly porous Ti6Al4V bilayer for biomedical applications.Conventional powder metallurgy technique,with semi-solid state sintering as consolidation step,was emplo...The aim of this work was to develop a Ti6Al4V/20CoCrMo−highly porous Ti6Al4V bilayer for biomedical applications.Conventional powder metallurgy technique,with semi-solid state sintering as consolidation step,was employed to fabricate samples with a compact top layer and a porous bottom layer to better mimic natural bone.The densification behavior of the bilayer specimen was studied by dilatometry and the resulting microstructure was observed by scan electron microscopy(SEM)and computed microtomography(CMT),while the mechanical properties and corrosion resistance were evaluated by compression and potentiodynamic tests,respectively.The results indicate that bilayer samples without cracks were obtained at the interface which has no negative impact on the densification.Permeability values of the highly porous layer were in the lower range of those of human bones.The compression behavior is dictated by the highly porous Ti6Al4V layer.Additionally,the corrosion resistance of Ti6Al4V/20CoCrMo is better than that of Ti6Al4V,which improves the performance of the bilayer sample.This work provides an insight into the important aspects of a bilayer fabrication by powder metallurgy and properties of Ti6Al4V/20CoCrMo−highly porous Ti6Al4V structure,which can potentially benefit the production of customized implants with improved wear performance and increased in vivo lifetime.展开更多
Four-dimensional(4D)printing is an advanced form of three-dimensional(3D)printing with controllable and programmable shape transformation over time.Actuators are used as a controlling factor with multi-stage shape rec...Four-dimensional(4D)printing is an advanced form of three-dimensional(3D)printing with controllable and programmable shape transformation over time.Actuators are used as a controlling factor with multi-stage shape recovery,with emerging opportunities to customize the mechanical properties of bio-inspired structures.The print pattern of shape memory polymer(SMP)fbers strongly afects the achievable resolution,and consequently infuences several other physical and mechanical properties of fabricated actuators.However,the deformations of bio-inspired structures due to actuator layout are more complex because of the presence of the coupling of multi-directional strain.In this study,the initial structure was designed from closed-shell behavior and divided into a general unit and actuator unit,the latter responsible for driving the transformation.Mutual stress confrontation between the actuator and the general unit was considered in the layout thermodynamic model,in order to eliminate the transformation produced by the uncontrolled shape memory behavior of the general unit.Three critical and efective strategies for the layout design of actuators were proposed and then applied to achieve the desired accurate deformation of 3D-printed bilayer structures.Finally,the proposed approach was validated and adopted for fabricating a complex shell-like gripper structure.展开更多
Two new metal-organic frameworks, [Co3L2（NO2）2（H2O）2],, （1） and{[Ni（L）（H2O）5] （H2O）2.DMF}, （2, H2L = 5-（4-pyridyl）-methoxyl isophthalic acid）, have been synthesized by the hydrothermal method and chara...Two new metal-organic frameworks, [Co3L2（NO2）2（H2O）2],, （1） and{[Ni（L）（H2O）5] （H2O）2.DMF}, （2, H2L = 5-（4-pyridyl）-methoxyl isophthalic acid）, have been synthesized by the hydrothermal method and characterized by elemental analysis, infrared spectroscopy, thermogravimetric analysis （TGA） and X-ray crystallography. Compound 1 crystallizes in the monoclinic system with space group P2/c and adopts a slightly distorted octahedral configuration. In compound 1, the 2D bilayered structures are linked by O-H...O and O-H...N hydrogen bonds to form a 3D framework. Compound 2 crystallizes in the monoclinic system with space group P2/n, and the central nickel atoms are octa-coordinated with five O atoms from coordinated water molecules and one N atom from one H2L ligand. The abundant O-H…O hydrogen bonds and π…π interactions link the molecules into a 3D framework. In addition, compounds 1 and 2 exhibit strong ultraviolet absorption in the solid state at room temperature.展开更多
Recently, the effect of ligand receptor interaction on the membrane structure of liposomes has been studied extensively. However, little is known about how it exists on biological membranes. In this paper, the effect ...Recently, the effect of ligand receptor interaction on the membrane structure of liposomes has been studied extensively. However, little is known about how it exists on biological membranes. In this paper, the effect of Con-canavalin A (ConA) receptor interaction on the structure of cell membranes was studied by Circular Dichroism (CD) and 3lP Nuclear Magnetic Resonance (NMR).CD results of both the purified macrophage membranes and human erythrocyte ghosts (EG) showed that the conformation of membrane proteins changed after ConA bind ing.For further research, 31P-NMR was used to detect the organization of phospholipid molecules on macrophage mem branes. After ConA binding, the tendency to form non bi-layer structure increased with the amount of ConA. The changes of 31P-NMR spectra of living macrophages might be partly due to the above stated reason too.In addition, ConA-receptor interaction also induced similar results of 31P-NMR spectra in EG. In contrast, wheat germ agglutinin (WGA ), another kind of lectin, rarely showed the same influence.展开更多
A case of esophageal carcinoma exclusively composed of adenocarcinoma simulating an esophageal gland duct in a 61-year-old man is presented. The tumor arose as a slightly elevated lesion in the middle intrathoracic es...A case of esophageal carcinoma exclusively composed of adenocarcinoma simulating an esophageal gland duct in a 61-year-old man is presented. The tumor arose as a slightly elevated lesion in the middle intrathoracic esophagus. It was almost completely overlaid with nonneoplastic stratified squamous epithelial cells. Beneath the overlying surface epithelium, an adenocarcinoma that was bilayered in structure diffusely invaded both the mucosal and submucosal layers. Although the tumor consisted exclusively of adenocarcinomatous cells, a keratinizing squamous cell carcinoma component was focally observed. The invasive carcinoma was focally continuous with the small area of the surface squamous epithelial layer, which was confirmed to be neoplastic by immunohistochemistry. Morphological and immunohistochemical examinations suggested that the adenocarcinomatous component arose from the esophageal surface epithelium and clearly differentiated into an esophageal gland duct. It is important to consider the possibility of this type of adenocarcinoma when diagnosing a ductal or glandular lesion of the esophagus in small biopsy specimens.展开更多
Lithium metal anodes (LMAs) are considered as the promising alternatives for next-generation high energy density batteries,but are still hampered by the severe growth of uncontrollable lithium dendrites.The growth of ...Lithium metal anodes (LMAs) are considered as the promising alternatives for next-generation high energy density batteries,but are still hampered by the severe growth of uncontrollable lithium dendrites.The growth of lithium dendrites induces poor cycling lifespan and serious safety concerns,dragging lithium metal batteries out of practical applications.We designed a bilayer carbonbased structure covered with Co/C nanosheets and vertical graphene sheets (VGS).The enormous specific surface area and uniformly distributed Co nanoparticles of the CC@Co/C-VGS host are derived from its unique design,which can reduce local current density and nucleation overpotential,resulting in a dendrite-free morphology and exceptional cycling stability.Symmetric cells exhibit over 400 cycles (800 h) at a high current density/capacity of 10 mA cm^(-2)/10 mA h cm^(-2).Full cells using LiFePO_(4)as the cathode have an enhanced rate capability and a prolonged lifespan,reaching 90 mA h g^(-1)after 1000 cycles at 2 C with 73.5% capacity retention.This unique design sheds light on developing high-performance LMAs.展开更多
A tcrahcrtz （THz） broadband polarizer using bilayer subwavelength metal wire-grid structure on both sides of polyimide fihn is simulated by the finite-difference time-domain method. We amdyze tile effect of film thi...A tcrahcrtz （THz） broadband polarizer using bilayer subwavelength metal wire-grid structure on both sides of polyimide fihn is simulated by the finite-difference time-domain method. We amdyze tile effect of film thickness, material loss, and lateral shift between two metallic gratings on the performance of the THz polarizer. Bilayer wire-grid polarizers are fabricated by a simple way of laser induced and non-electrolytic plating with copper. The THz time-domain spectroscopy measurements show that in 0.2 1.6 THz frequency range, the extinction ratio is better than 45 dB, the average extinction ratio reaches 53 dB, and the transmittance exceeds 67%, which shows great advantage over conventional single wire-grid THz polarizer.展开更多
Hard magnetic soft robots have been widely used in biomedical engineering.In these applications,it is crucial to sense the movement of soft robots and their interaction with target objects.Here,we propose a strategy t...Hard magnetic soft robots have been widely used in biomedical engineering.In these applications,it is crucial to sense the movement of soft robots and their interaction with target objects.Here,we propose a strategy to fabricate a self-sensing bilayer actuator by combining magnetic and ionic conductive hydrogels.The magnetic hydrogel containing NdFeB particles exhibits rapid response to magnetic field and achieve bending deformation.Meanwhile,the polyacrylamide(PAAm)hydrogel with lithium chloride(LiCl)allows for the sensing of deformation.The bending behavior of the bilayer under magnetic field is well captured by theoretical and simulated models.Additionally,the bilayer strain sensor shows good sensitivity,stability and can endure a wide-range cyclic stretching(0-300%).These merits qualify the self-sensing actuator to monitor the motion signals,such as bending of fingers and grasping process of an intelligent gripper.When subject to an external magnetic field,the gripper can grab a cube and sense the resistance change simultaneously to detect the object size.This work may provide a versatile strategy to integrate actuating and self-sensing ability in soft robots.展开更多
For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The...For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The mesoporous anatase TiO2, prepared through a facile surfactant-assisted sol-gel process, possessed large pore size and well inter-connected network structure, both beneficial for dye adsorption and electron transfer. The dye adsorption capability of the mesoporous TiO2 was nearly twice that of the P25 counterpart. In the electrode, the mesoporous TiO2 film enhanced both dye adsorption and lightharvest, to increase photocurrent （Jsc） from 12.32 to 14.78 mA/cm^2. Compared to the single P25 TiO2 film, the synergy of the mesoporous TiO2 and the P25 TiO2 nanoparticle films in the electrode resulted in a 24% improvement in light-to-electricity conversion efficiency （η）. This bilayered electrode provides an alternative approach for further developing a photovoltaic device with better cell performance.展开更多
We carefully investigated the ferromagnetic coupling in the as-grown and annealed ferromagnetic semiconductor GaMnAs/A1GaMnAs bilayer devices. We observed that the magnetic interaction between the two layers strongly ...We carefully investigated the ferromagnetic coupling in the as-grown and annealed ferromagnetic semiconductor GaMnAs/A1GaMnAs bilayer devices. We observed that the magnetic interaction between the two layers strongly affects the magnetoresistance of the GaMnAs layer with applying the out of plane magnetic field. After low temperature annealing, the magnetic easy axis of the A1GaMnAs layer switches from out of plane into in-plane and the interlayer coupling efficiency is reduced from up to 0.6 to less than 0.4. However, the magnetic coupling penetration depth for the annealed device is twice that of the as-grown bilayer device.展开更多
Bilayer structure with functional overlayer has been commonly adopted to resolve the issue of moisture poisoning in chemiresistors.However,the conventional overlayers always suffer from blocking access of gas molecule...Bilayer structure with functional overlayer has been commonly adopted to resolve the issue of moisture poisoning in chemiresistors.However,the conventional overlayers always suffer from blocking access of gas molecules to sensing layer due to lacking porosity and deteriorated adsorption capability.Herein,taking advantages of the well-defined porous structure and hydrophobic nature of pure silica zeolite,we assembled an overlayer of Pd-PdO clusters-encapsulated mesoporous silicalite-1(MFI)zeolite(named M-S-1)on ZnO sensing layer,to prevent moisture poisoning,and enhance gas diffusion and adsorption capabilities.The inherent capability of MFI zeolite to incorporate monodispersed nanometric(ca.3 nm)Pd-PdO cluster in its void space is of great importance for the NO_(2) adsorption.The Pd-PdO@M-S-1 overlayer can attain negligible moisture interference to the ZnO layer without significantly altering the gas selectivity and baseline resistance,and enhance gas response.Consequently,the Pd-PdO@M-S-1/ZnO bilayer sensor can ultra-selectively(S_(nitrogen dioxide)/S_(interference gas)>4),and ultra-stably detect trace level of NO_(2)(9.5 ppb)at low temperature(370 K)under high levels of humidity(90%RH).This work exemplifies a next-generation solution to design bilayer sensors using zeolite overlayer for eliminating the humidity dependence of the gas-sensing properties.展开更多
基金the National Natural Science Foundation of China(Nos.52130501 and 52075479)the National Key R&D Program of China(No.2018YFB1700804)。
文摘The four-dimensional(4D) printing technology, as a combination of additive manufacturing and smart materials, has attracted increasing research interest in recent years. The bilayer structures printed with smart materials using this technology can realize complicated deformation under some special stimuli due to the material properties.The deformation prediction of bilayer structures can make the design process more rapid and thus is of great importance. However, the previous works on deformation prediction of bilayer structures rarely study the complicated deformations or the influence of the printing process on deformation. Thus, this paper proposes a new method to predict the complicated deformations of temperature-sensitive 4D printed bilayer structures,in particular to the bilayer structures based on temperature-driven shape-memory polymers(SMPs) and fabricated using the fused deposition modeling(FDM) technology. The programming process to the material during printing is revealed and considered in the simulation model. Simulation results are compared with experiments to verify the validity of the method. The advantages of this method are stable convergence and high efficiency,as the three-dimensional(3D) problem is converted to a two-dimensional(2D) problem.The simulation parameters in the model can be further associated with the printing parameters, which shows good application prospect in 4D printed bilayer structure design.
基金Project supported by the Construct Program of the Key Discipline in Hunan Province,ChinaAid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province,China
文摘First-principle calculations with different exchange-correlation functionals, including LDA, PBE, and vd W-DF functional in the form of opt B88-vd W, have been performed to investigate the electronic and elastic properties of twodimensional transition metal dichalcogenides（TMDCs） with the formula of MX2（M = Mo, W; X = O, S, Se, Te） in both monolayer and bilayer structures. The calculated band structures show a direct band gap for monolayer TMDCs at the K point except for MoO2 and WO2. When the monolayers are stacked into a bilayer, the reduced indirect band gaps are found except for bilayer WTe2, in which the direct gap is still present at the K point. The calculated in-plane Young moduli are comparable to that of graphene, which promises possible application of TMDCs in future flexible and stretchable electronic devices. We also evaluated the performance of different functionals including LDA, PBE, and opt B88-vd W in describing elastic moduli of TMDCs and found that LDA seems to be the most qualified method. Moreover, our calculations suggest that the Young moduli for bilayers are insensitive to stacking orders and the mechanical coupling between monolayers seems to be negligible.
基金supported by the Nation Science Foundation of China (Grant no. 51920105011)Key R&D project of Liaoning Province of China (No. 2020JH2/10300079)Liao Ning revitalization talents program (XLYC1908034)。
文摘A bilayer nano-stanene-like structure with Ruderman-Kittel-Kasuya-Yoshida(RKKY)coupling described by the Ising model is proposed. The magnetic and thermodynamic properties are studied using the effective-field theory with correlations. The exchange coupling,longitudinal magnetic field, number of non-magnetic layers, and anisotropies had major influences on the magnetization, specific heat, and internal energy. Different saturation magnetizations are observed on the magnetization curve. The variation in the system blocking temperature is studied. The results provide theoretical guidance for the magnetic investigation of nanomaterials with RKKY coupling.
基金This work was supported by the National Council for Science and Technology CONACYT(Mihalcea PhD scholarship 473734 and Dr.Chávez postdoctoral fellow 000614)The authors would like to thank the CIC of the UMSNH and the National Laboratory SEDEAM-CONACYT for the financial support and the facilities provided for the development of this study.We would also like to thank the Laboratory“LUMIR”Geosciences of the UNAM,Juriquilla,for the 3D image acquisition and processing.
文摘The aim of this work was to develop a Ti6Al4V/20CoCrMo−highly porous Ti6Al4V bilayer for biomedical applications.Conventional powder metallurgy technique,with semi-solid state sintering as consolidation step,was employed to fabricate samples with a compact top layer and a porous bottom layer to better mimic natural bone.The densification behavior of the bilayer specimen was studied by dilatometry and the resulting microstructure was observed by scan electron microscopy(SEM)and computed microtomography(CMT),while the mechanical properties and corrosion resistance were evaluated by compression and potentiodynamic tests,respectively.The results indicate that bilayer samples without cracks were obtained at the interface which has no negative impact on the densification.Permeability values of the highly porous layer were in the lower range of those of human bones.The compression behavior is dictated by the highly porous Ti6Al4V layer.Additionally,the corrosion resistance of Ti6Al4V/20CoCrMo is better than that of Ti6Al4V,which improves the performance of the bilayer sample.This work provides an insight into the important aspects of a bilayer fabrication by powder metallurgy and properties of Ti6Al4V/20CoCrMo−highly porous Ti6Al4V structure,which can potentially benefit the production of customized implants with improved wear performance and increased in vivo lifetime.
基金the National Natural Science Foundation of China(Nos.51805472,51775489,and 51975386)the Natural Science Foundation of Zhejiang Province,China(No.LZ21E050004).
文摘Four-dimensional(4D)printing is an advanced form of three-dimensional(3D)printing with controllable and programmable shape transformation over time.Actuators are used as a controlling factor with multi-stage shape recovery,with emerging opportunities to customize the mechanical properties of bio-inspired structures.The print pattern of shape memory polymer(SMP)fbers strongly afects the achievable resolution,and consequently infuences several other physical and mechanical properties of fabricated actuators.However,the deformations of bio-inspired structures due to actuator layout are more complex because of the presence of the coupling of multi-directional strain.In this study,the initial structure was designed from closed-shell behavior and divided into a general unit and actuator unit,the latter responsible for driving the transformation.Mutual stress confrontation between the actuator and the general unit was considered in the layout thermodynamic model,in order to eliminate the transformation produced by the uncontrolled shape memory behavior of the general unit.Three critical and efective strategies for the layout design of actuators were proposed and then applied to achieve the desired accurate deformation of 3D-printed bilayer structures.Finally,the proposed approach was validated and adopted for fabricating a complex shell-like gripper structure.
基金supported by the National Natural Science Foundation of China (No.20971065)the National Basic Research Program of China (No.2010CB923303)
文摘Two new metal-organic frameworks, [Co3L2（NO2）2（H2O）2],, （1） and{[Ni（L）（H2O）5] （H2O）2.DMF}, （2, H2L = 5-（4-pyridyl）-methoxyl isophthalic acid）, have been synthesized by the hydrothermal method and characterized by elemental analysis, infrared spectroscopy, thermogravimetric analysis （TGA） and X-ray crystallography. Compound 1 crystallizes in the monoclinic system with space group P2/c and adopts a slightly distorted octahedral configuration. In compound 1, the 2D bilayered structures are linked by O-H...O and O-H...N hydrogen bonds to form a 3D framework. Compound 2 crystallizes in the monoclinic system with space group P2/n, and the central nickel atoms are octa-coordinated with five O atoms from coordinated water molecules and one N atom from one H2L ligand. The abundant O-H…O hydrogen bonds and π…π interactions link the molecules into a 3D framework. In addition, compounds 1 and 2 exhibit strong ultraviolet absorption in the solid state at room temperature.
文摘Recently, the effect of ligand receptor interaction on the membrane structure of liposomes has been studied extensively. However, little is known about how it exists on biological membranes. In this paper, the effect of Con-canavalin A (ConA) receptor interaction on the structure of cell membranes was studied by Circular Dichroism (CD) and 3lP Nuclear Magnetic Resonance (NMR).CD results of both the purified macrophage membranes and human erythrocyte ghosts (EG) showed that the conformation of membrane proteins changed after ConA bind ing.For further research, 31P-NMR was used to detect the organization of phospholipid molecules on macrophage mem branes. After ConA binding, the tendency to form non bi-layer structure increased with the amount of ConA. The changes of 31P-NMR spectra of living macrophages might be partly due to the above stated reason too.In addition, ConA-receptor interaction also induced similar results of 31P-NMR spectra in EG. In contrast, wheat germ agglutinin (WGA ), another kind of lectin, rarely showed the same influence.
文摘A case of esophageal carcinoma exclusively composed of adenocarcinoma simulating an esophageal gland duct in a 61-year-old man is presented. The tumor arose as a slightly elevated lesion in the middle intrathoracic esophagus. It was almost completely overlaid with nonneoplastic stratified squamous epithelial cells. Beneath the overlying surface epithelium, an adenocarcinoma that was bilayered in structure diffusely invaded both the mucosal and submucosal layers. Although the tumor consisted exclusively of adenocarcinomatous cells, a keratinizing squamous cell carcinoma component was focally observed. The invasive carcinoma was focally continuous with the small area of the surface squamous epithelial layer, which was confirmed to be neoplastic by immunohistochemistry. Morphological and immunohistochemical examinations suggested that the adenocarcinomatous component arose from the esophageal surface epithelium and clearly differentiated into an esophageal gland duct. It is important to consider the possibility of this type of adenocarcinoma when diagnosing a ductal or glandular lesion of the esophagus in small biopsy specimens.
基金supported by the Award Program for Fujian Minjiang Scholar Professorshipthe National Natural Science Foundation of China(Grant No. 11704071)+2 种基金the Excellent Youth Foundation of Fujian Scientific Committee (Grant No. 2019J06008)Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China (Grant No.2021ZR146)Fujian Provincial Department of Industry and Information Technology of China (Grant No. 82318075)。
文摘Lithium metal anodes (LMAs) are considered as the promising alternatives for next-generation high energy density batteries,but are still hampered by the severe growth of uncontrollable lithium dendrites.The growth of lithium dendrites induces poor cycling lifespan and serious safety concerns,dragging lithium metal batteries out of practical applications.We designed a bilayer carbonbased structure covered with Co/C nanosheets and vertical graphene sheets (VGS).The enormous specific surface area and uniformly distributed Co nanoparticles of the CC@Co/C-VGS host are derived from its unique design,which can reduce local current density and nucleation overpotential,resulting in a dendrite-free morphology and exceptional cycling stability.Symmetric cells exhibit over 400 cycles (800 h) at a high current density/capacity of 10 mA cm^(-2)/10 mA h cm^(-2).Full cells using LiFePO_(4)as the cathode have an enhanced rate capability and a prolonged lifespan,reaching 90 mA h g^(-1)after 1000 cycles at 2 C with 73.5% capacity retention.This unique design sheds light on developing high-performance LMAs.
基金partly supported by the NationalNatural Science Foundation of China under Grant Nos.61377108 and 61107042
文摘A tcrahcrtz （THz） broadband polarizer using bilayer subwavelength metal wire-grid structure on both sides of polyimide fihn is simulated by the finite-difference time-domain method. We amdyze tile effect of film thickness, material loss, and lateral shift between two metallic gratings on the performance of the THz polarizer. Bilayer wire-grid polarizers are fabricated by a simple way of laser induced and non-electrolytic plating with copper. The THz time-domain spectroscopy measurements show that in 0.2 1.6 THz frequency range, the extinction ratio is better than 45 dB, the average extinction ratio reaches 53 dB, and the transmittance exceeds 67%, which shows great advantage over conventional single wire-grid THz polarizer.
基金support from the National Natural Science Foundation of China(No.12172272 and 11820101001).
文摘Hard magnetic soft robots have been widely used in biomedical engineering.In these applications,it is crucial to sense the movement of soft robots and their interaction with target objects.Here,we propose a strategy to fabricate a self-sensing bilayer actuator by combining magnetic and ionic conductive hydrogels.The magnetic hydrogel containing NdFeB particles exhibits rapid response to magnetic field and achieve bending deformation.Meanwhile,the polyacrylamide(PAAm)hydrogel with lithium chloride(LiCl)allows for the sensing of deformation.The bending behavior of the bilayer under magnetic field is well captured by theoretical and simulated models.Additionally,the bilayer strain sensor shows good sensitivity,stability and can endure a wide-range cyclic stretching(0-300%).These merits qualify the self-sensing actuator to monitor the motion signals,such as bending of fingers and grasping process of an intelligent gripper.When subject to an external magnetic field,the gripper can grab a cube and sense the resistance change simultaneously to detect the object size.This work may provide a versatile strategy to integrate actuating and self-sensing ability in soft robots.
基金supported by the National Natural Science Foundation of China (20925621)Shanghai Rising-Star Program (09QH1400700,09QA1401500)+4 种基金Special Projects for Key Laboratories in Shanghai (09DZ2202000,10DZ2211100)Special Projects for Nanotechnology of Shanghai (0952nm02100)Shanghai Pujiang Program (09PJ1403200)Basic Research Program of Shanghai (10JC1403300)Fundamental Research Funds for the Central Universities
文摘For better performance of dye sensitized solar cells （DSSCs）, a bilayer structured electrode was constructed by employing a mesoporous anatase TiO2 overlayer above a commercial P25 TiO2 nanoparticles underlayer. The mesoporous anatase TiO2, prepared through a facile surfactant-assisted sol-gel process, possessed large pore size and well inter-connected network structure, both beneficial for dye adsorption and electron transfer. The dye adsorption capability of the mesoporous TiO2 was nearly twice that of the P25 counterpart. In the electrode, the mesoporous TiO2 film enhanced both dye adsorption and lightharvest, to increase photocurrent （Jsc） from 12.32 to 14.78 mA/cm^2. Compared to the single P25 TiO2 film, the synergy of the mesoporous TiO2 and the P25 TiO2 nanoparticle films in the electrode resulted in a 24% improvement in light-to-electricity conversion efficiency （η）. This bilayered electrode provides an alternative approach for further developing a photovoltaic device with better cell performance.
基金supported by the National Basic Research Program of China (Grant Nos. 2011CB922200 and 2009CB929301)the National Natural Science Foundation of China (Grant Nos. 11174272 and 61225021)+1 种基金 EPSRC-NSFC joint (Grant No. 10911130232/A0402)WANG KaiYou also acknowledges the support of Chinese Academy of Sciences 100 Talent Program
文摘We carefully investigated the ferromagnetic coupling in the as-grown and annealed ferromagnetic semiconductor GaMnAs/A1GaMnAs bilayer devices. We observed that the magnetic interaction between the two layers strongly affects the magnetoresistance of the GaMnAs layer with applying the out of plane magnetic field. After low temperature annealing, the magnetic easy axis of the A1GaMnAs layer switches from out of plane into in-plane and the interlayer coupling efficiency is reduced from up to 0.6 to less than 0.4. However, the magnetic coupling penetration depth for the annealed device is twice that of the as-grown bilayer device.
基金the financial support by the National Natural Science Foundation of China(Nos.22288101,22375070,and 62303192)the 111 Project of China(No.B17020)Jilin Province Science and Technology Development Plan Project(No.20230508178RC).
文摘Bilayer structure with functional overlayer has been commonly adopted to resolve the issue of moisture poisoning in chemiresistors.However,the conventional overlayers always suffer from blocking access of gas molecules to sensing layer due to lacking porosity and deteriorated adsorption capability.Herein,taking advantages of the well-defined porous structure and hydrophobic nature of pure silica zeolite,we assembled an overlayer of Pd-PdO clusters-encapsulated mesoporous silicalite-1(MFI)zeolite(named M-S-1)on ZnO sensing layer,to prevent moisture poisoning,and enhance gas diffusion and adsorption capabilities.The inherent capability of MFI zeolite to incorporate monodispersed nanometric(ca.3 nm)Pd-PdO cluster in its void space is of great importance for the NO_(2) adsorption.The Pd-PdO@M-S-1 overlayer can attain negligible moisture interference to the ZnO layer without significantly altering the gas selectivity and baseline resistance,and enhance gas response.Consequently,the Pd-PdO@M-S-1/ZnO bilayer sensor can ultra-selectively(S_(nitrogen dioxide)/S_(interference gas)>4),and ultra-stably detect trace level of NO_(2)(9.5 ppb)at low temperature(370 K)under high levels of humidity(90%RH).This work exemplifies a next-generation solution to design bilayer sensors using zeolite overlayer for eliminating the humidity dependence of the gas-sensing properties.
