This paper demonstrated our discovery of the movement effect of BiFeO_3 nanoparticles in solution by strong electrical polarization. First, BiFeO_3 nanoparticles were prepared by ball milling and characterized by SEM....This paper demonstrated our discovery of the movement effect of BiFeO_3 nanoparticles in solution by strong electrical polarization. First, BiFeO_3 nanoparticles were prepared by ball milling and characterized by SEM. Then, the preparation of BiFeO_3 solution was finished. BiFeO_3 nanoparticles are found to move in solution due to electrical field. The movement velocity of BiFeO_3 nanoparticles, which is about 10 μm·s^-1 , is influenced and controlled by the applied electrical field. The concentration of BiFeO_3 solution and the nanoparticle sizes also have effects on its movement properties. The movement of BiFeO_3 nanoparticles in solution is induced by strong polarization, and BiFeO_3 nanoparticles have net negative electric charges because of the electrostatic force between BiFeO_3 nanoparticles and the negative ions in water resolver.展开更多
Two-dimensional(2D)nitride MXenes are predicted to exhibit exceptional metallic properties and high polarity;however,their synthesis remains challenging.Research has relied on traditional molten salt etching,highlight...Two-dimensional(2D)nitride MXenes are predicted to exhibit exceptional metallic properties and high polarity;however,their synthesis remains challenging.Research has relied on traditional molten salt etching,highlighting the need for a scalable,high-purity approach.Here,we present the first solution-based synthesis of Ti_(4)N_(3)T_(x)MXene via a novel saturated salt solution(S^(3))etching technique employing alkali metal salts.By optimizing the sintering process for high-purity Ti_(4)AlN_(3)MAX and refining the S^(3)etching route,we significantly reduced the etch pit density to 1.2×10^(6)cm^(-2)and lowered the etch pit formation rate to 4%,yielding high-quality,phasepure Ti_(4)N_(3)T_(x)MXene.Our study highlights the critical role of alkali metal ions in selective A-layer removal and demonstrates the impressive electrical conductivity and electromagnetic interference shielding performance of 2D nitride MXene,setting a new benchmark for this underexplored material.These findings pave the way for advancing 2D nitride MXenes and their diverse applications.展开更多
In the underhand cut-and-fill mining method,a sill mat(i.e.an artificial horizontal pillar)constructed by cemented backfill is essential to prevent mine workers from being directly exposed under problematic rock roofs...In the underhand cut-and-fill mining method,a sill mat(i.e.an artificial horizontal pillar)constructed by cemented backfill is essential to prevent mine workers from being directly exposed under problematic rock roofs.A critical issue is to determine the minimum required strength of the sill mat to ensure a safe and cost-effective design.Until now,Mitchell’s analytical solution is the only available option,considering two stiff and immobile rock walls.Unavoidable rock wall closure associated with stope excavation below the sill mat was neglected.This,along with other undefined parameters,explains why Mitchell’s solution is rarely used in sill mat design.A new analytical solution for determining the minimum required strength of the sill mat accounting for wall closure is necessary.In this study,a closed-form analytical solution for estimating rock wall closure generated by stope excavation below a sill mat is developed by using Salamon’s and Flamant’s models.The proposed analytical solution does not contain any coefficients of correction or calibration.Despite several assumptions(or somewhat of oversimplifications)necessary to render a simple analytical solution possible,good agreements are obtained between the rock wall closures predicted by applying the proposed analytical solution and those obtained numerically with FLAC3D for many cases with arbitrarily chosen geometrical and material parameters.The proposed analytical solution is therefore validated and can be used to evaluate the rock wall closure generated by stope excavation below a sill mat.展开更多
Lie symmetry analysis is applied to a(3+1)-dimensional combined potential Kadomtsev-Petviashvili equation with B-type Kadomtsev-Petviashvili equation(pKP-BKP equation)and the corresponding similarity reduction equatio...Lie symmetry analysis is applied to a(3+1)-dimensional combined potential Kadomtsev-Petviashvili equation with B-type Kadomtsev-Petviashvili equation(pKP-BKP equation)and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions and constants for the(3+1)-dimensional pKP-BKP equation,including the lump solution,the periodic-lump solution,the two-kink solution,the breather solution and the lump-two-kink solution,have been studied analytically and graphically.展开更多
The dynamics of the drying process of polymer solutions are important for the development of coatings and films.In the present work,digital holographic microscopy(DHM)was performed to capture the drying dynamics of po...The dynamics of the drying process of polymer solutions are important for the development of coatings and films.In the present work,digital holographic microscopy(DHM)was performed to capture the drying dynamics of poly(ethylene oxide)(PEO)droplets using a gold nanoparticle tracer,where the heterogeneous flow field in different regions was illustrated.This demonstrates that the gold nanoparticles at either the center or the edge regions of the droplet exhibit anisotropic kinematic behavior.At early stage,Marangoni backflow causes gold nanoparticles to move towards the edge firstly,and the circles back towards the droplet center after arriving the contact line with a sudden increase in z axis for 10.4μm,indicating the scale of the upward-moving microscopic flow vortices.This phenomenon does not occur in water droplets in the absence of polymers.The gold nanoparticles underwent Brownian-like motion at the center of the PEO droplet or water droplet owing to the low perturbation of the flow field.At the late stage of pinning of the PEO droplets,the motion showed multiple reverses in the direction of the gold nanoparticles,indicating the complexity of the flow field.This study enhances the understanding of the drying dynamics of polymer solution droplets and offers valuable insights into the fabrication of surface materials.展开更多
Aqueous zinc(Zn)-ion batteries(AZIBs)have gained significant interest in energy storage due to several unique advantages.Utilizing waterbased electrolytes enhances environmental sustainability,while the abundance and ...Aqueous zinc(Zn)-ion batteries(AZIBs)have gained significant interest in energy storage due to several unique advantages.Utilizing waterbased electrolytes enhances environmental sustainability,while the abundance and affordability of Zn offer economic benefits.Manganese(Mn)-based materials,commonly used as cathodes in these batteries,provide high theoretical capacity,high electrical conductivity,and good structural stability.However,these materials suffer from capacity degradation over repeated cycles due to structural collapse and limited conductivity.To address this problem,we synthesized a magnesium(Mg)-and Mn-based composite,Mg^(2+)-Mn_(3)O_(4),using the hydrothermal method with an optimized amount of ammonium hydroxide(NH_(4)OH)solution.This approach effectively stabilizes the structure during cycling,enhancing both capacity retention and conductivity.The Zn^(2+)/H+intercalation/deintercalation process was confirmed by experimental results and ex-situ X-ray diffraction analysis,which demonstrates that Mg^(2+),along with optimized NH_(4)OH amount,prevents structural collapse and improves conductivity.Under optimal process conditions,the composite electrode(Mg^(2+)-Mn_(3)O_(4)–8 ml)achieved a capacity of 173.58 mA h g^(-1) at 0.5 A g^(-1),with excellent rate performance of 71.39 mA h g^(-1) at 10 A g^(-1).Remarkably,even at 5 A g^(-1),the electrode maintained a capacity of 86.87 mA h g^(-1) over 2100 cycles,underscoring the role of Mg^(2+)and NH_(4)OH in enhancing the reversible insertion/extraction stability of Zn^(2+)in Mn-based layered materials.This study presents a novel strategy for metal-ion incorporation in Mn-based AZIBs,offering insights into the optimization of cathode materials and advancing research on associated storage mechanisms.展开更多
The low-dose X-ray induced long afterglow near infrared(NIR)luminescence from Cr^(3+)doped Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions was investigated.The structure analysis shows the good formation of Zn_(1-x)Cd...The low-dose X-ray induced long afterglow near infrared(NIR)luminescence from Cr^(3+)doped Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions was investigated.The structure analysis shows the good formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions,which possesses a cubic spinel structure with Fd3m space group.The formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions induces the obvious increase of long afterglow near infrared luminescence excited by low-dose X-ray,When the content of doped Cd^(2+)reaches 0.1,the low-dose X-ray induced long afterglow NIR luminescence is the maximum.More importantly,only 5 s Xray irradiation can induce more than 6 h NIR afterglow emission,of which the afterglow luminescent intensity is still 5 times stronger than the background intensity after 6 h.The thermoluminescent results show that under the 5 s exposure of X-ray,the trap density of Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):Cr^(3+)is much higher than that of ZnGa_(2)O_(4):Cr^(3+).The replacement of Cd^(2+)ions with large radius at Zn^(2+)sites causes the increase of de fects and dislocations,which results in the obvious increase of trap co ncentrations.And the addition of high-z number elements Cd^(2+)would enhance the X-ray absorption of the solid solutions,which thus can be easily excited by low-dose X-ray.Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):1%Cr^(3+)solid solution is a potential candidate of lowdose X-ray induced long afterglow luminescent materials.展开更多
To separate the phosphorus-containing phase from steel slag,the effects of B_(2)O_(3)and Na_(2)B_(4)O_(7)on the enrichment of phosphorus-containing phases in Ca_(2)SiO_(4)–Ca_(3)(PO_(4))_(2)(C_(2)S–C_(3)P)solid solu...To separate the phosphorus-containing phase from steel slag,the effects of B_(2)O_(3)and Na_(2)B_(4)O_(7)on the enrichment of phosphorus-containing phases in Ca_(2)SiO_(4)–Ca_(3)(PO_(4))_(2)(C_(2)S–C_(3)P)solid solution were comparatively analyzed through theoretical calculations and experimental investigations.The results indicate that the optimum reaction temperature between B_(2)O_(3)and C_(2)S–C_(3)P is 800℃.The phase compositions of C_(2)S–C_(3)P equilibrium system with 5 wt.%B_(2)O_(3)at 800℃ included Ca_(3)(PO_(4))_(2),CaSiO_(3)and Ca11B_(2)Si_(4)O_(22),among which the content of Ca_(3)(PO_(4))_(2)was the highest.For C_(2)S–C_(3)P with 5 wt.%Na_(2)B_(4)O_(7)equilibrium system,Ca_(3)(PO_(4))_(2),CaSiO_(3),Ca11B_(2)Si_(4)O_(22)and Na_(2)Ca_(2)P_(2)O_(8)were independent at 390–690℃.Ca_(3)(PO_(4))_(2)and Ca_(2)SiO_(4)precipitated in the solid solution when the addition of B_(2)O_(3)was more than 6 wt.%,and the content of Ca_(3)(PO_(4))_(2)raised with the increase in the addition of B_(2)O_(3).The main phases in the C_(2)S–C_(3)P solid solution with Na_(2)B_(4)O_(7)were(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],Ca_(2)SiO_(4)and Na_(3)Ca_(6)(PO_(4))_(5)at 650℃.And when the addition of Na_(2)B_(4)O_(7)exceeded 6 wt.%,the content of Na_(3)Ca_(6)(PO_(4))_(5)increased significantly.There was no precipitation of Ca_(3)(PO_(4))_(2)or boron-containing phase in the samples with Na_(2)B_(4)O_(7),but a small proportion of Ca_(3)(PO_(4))_(2)transformed into(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],and Ca^(2+)was partially replaced by Na^(+)to generate Na_(3)Ca_(6)(PO_(4))_(5).As a result,the temperature for Na_(2)B_(4)O_(7)to enrich the phosphorus-containing phase in C_(2)S–C_(3)P solid solution was lower than that for B_(2)O_(3).However,the grade of the phosphorus-containing phase for Na_(2)B_(4)O_(7)was lower than that for B_(2)O_(3).展开更多
The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions f...The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.展开更多
Due to the negligible non-perturbation effect in the low-energy region, quantum chromodynamics （QCD） is limited to be applied to hadron problems in particle physics. However, QED has mature non-perturbation models w...Due to the negligible non-perturbation effect in the low-energy region, quantum chromodynamics （QCD） is limited to be applied to hadron problems in particle physics. However, QED has mature non-perturbation models which can be applied to Fermi acting-energy between quark and gluon. This paper applies quantum electrodynamics in 2 ＋ 1 dimensions （QED3） to the Fermi condensation problems. First, the Dyson-Schwinger equation which the fermions satisfy is constructed, and then the Fermi energy gap is solved. Theoretical calculations show that within the chirality limit, there exist three solutions for the energy gap; beyond the chirality limit, there are two solutions; all these solutions correspond to different fermion condensates. It can be concluded that the fermion condensates within the chirality limit can be used to analyze the existence of antiferromagnetic, pseudogap, and superconducting phases, and two fermion condensates are discovered beyond the chirality limit.展开更多
基金supported by the National Natural Science Foundation of China(No.50807042)the Research Fund for the Doctoral Program of Higher Education of China(No.200806981043)+1 种基金the Fundamental Research Fund for the Central Universities(No.xjj2012088)the fund of StateKey Laboratory of Electrical Insulation and Power Equipment(Xi'an Jiaotong University No.EIPE12305)
文摘This paper demonstrated our discovery of the movement effect of BiFeO_3 nanoparticles in solution by strong electrical polarization. First, BiFeO_3 nanoparticles were prepared by ball milling and characterized by SEM. Then, the preparation of BiFeO_3 solution was finished. BiFeO_3 nanoparticles are found to move in solution due to electrical field. The movement velocity of BiFeO_3 nanoparticles, which is about 10 μm·s^-1 , is influenced and controlled by the applied electrical field. The concentration of BiFeO_3 solution and the nanoparticle sizes also have effects on its movement properties. The movement of BiFeO_3 nanoparticles in solution is induced by strong polarization, and BiFeO_3 nanoparticles have net negative electric charges because of the electrostatic force between BiFeO_3 nanoparticles and the negative ions in water resolver.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by Ministry of Science and ICT(Grant No.RS-2024-00408180)by Institute for Basic Science(No.IBS-R019-G1).
文摘Two-dimensional(2D)nitride MXenes are predicted to exhibit exceptional metallic properties and high polarity;however,their synthesis remains challenging.Research has relied on traditional molten salt etching,highlighting the need for a scalable,high-purity approach.Here,we present the first solution-based synthesis of Ti_(4)N_(3)T_(x)MXene via a novel saturated salt solution(S^(3))etching technique employing alkali metal salts.By optimizing the sintering process for high-purity Ti_(4)AlN_(3)MAX and refining the S^(3)etching route,we significantly reduced the etch pit density to 1.2×10^(6)cm^(-2)and lowered the etch pit formation rate to 4%,yielding high-quality,phasepure Ti_(4)N_(3)T_(x)MXene.Our study highlights the critical role of alkali metal ions in selective A-layer removal and demonstrates the impressive electrical conductivity and electromagnetic interference shielding performance of 2D nitride MXene,setting a new benchmark for this underexplored material.These findings pave the way for advancing 2D nitride MXenes and their diverse applications.
基金financial support from the Young Scientist Project of the National Key Research and Development Program of China(Grant No.2021YFC2900600)the Beijing Nova Program(Grant No.20220484057)+1 种基金The authors acknowledge the financial support from the Natural Sciences and Engineering Research Council of Canada(Grant No.RGPIN-2018-06902)industrial partners of the Research Institute on Mines and the Environment(RIME UQAT-Polytechnique:https://irme.ca/en/).
文摘In the underhand cut-and-fill mining method,a sill mat(i.e.an artificial horizontal pillar)constructed by cemented backfill is essential to prevent mine workers from being directly exposed under problematic rock roofs.A critical issue is to determine the minimum required strength of the sill mat to ensure a safe and cost-effective design.Until now,Mitchell’s analytical solution is the only available option,considering two stiff and immobile rock walls.Unavoidable rock wall closure associated with stope excavation below the sill mat was neglected.This,along with other undefined parameters,explains why Mitchell’s solution is rarely used in sill mat design.A new analytical solution for determining the minimum required strength of the sill mat accounting for wall closure is necessary.In this study,a closed-form analytical solution for estimating rock wall closure generated by stope excavation below a sill mat is developed by using Salamon’s and Flamant’s models.The proposed analytical solution does not contain any coefficients of correction or calibration.Despite several assumptions(or somewhat of oversimplifications)necessary to render a simple analytical solution possible,good agreements are obtained between the rock wall closures predicted by applying the proposed analytical solution and those obtained numerically with FLAC3D for many cases with arbitrarily chosen geometrical and material parameters.The proposed analytical solution is therefore validated and can be used to evaluate the rock wall closure generated by stope excavation below a sill mat.
文摘Lie symmetry analysis is applied to a(3+1)-dimensional combined potential Kadomtsev-Petviashvili equation with B-type Kadomtsev-Petviashvili equation(pKP-BKP equation)and the corresponding similarity reduction equations are obtained with the different infinitesimal generators.Invariant solutions with arbitrary functions and constants for the(3+1)-dimensional pKP-BKP equation,including the lump solution,the periodic-lump solution,the two-kink solution,the breather solution and the lump-two-kink solution,have been studied analytically and graphically.
基金supported by the Key-Area Research and Development Program of Guangdong Province(No.2023B0101200006)Guangdong Basic and Applied Basic Research Foundation(No.2024A1515011926)+1 种基金Fund of Guangdong Provincial Key Laboratory of Luminescence from Molecular Aggregates,Guangzhou 510640,China(South China University of Technology)(No.2023B1212060003)State Key Laboratory of Applied Microbiology Southern China(No.SKLAM008-2022)。
文摘The dynamics of the drying process of polymer solutions are important for the development of coatings and films.In the present work,digital holographic microscopy(DHM)was performed to capture the drying dynamics of poly(ethylene oxide)(PEO)droplets using a gold nanoparticle tracer,where the heterogeneous flow field in different regions was illustrated.This demonstrates that the gold nanoparticles at either the center or the edge regions of the droplet exhibit anisotropic kinematic behavior.At early stage,Marangoni backflow causes gold nanoparticles to move towards the edge firstly,and the circles back towards the droplet center after arriving the contact line with a sudden increase in z axis for 10.4μm,indicating the scale of the upward-moving microscopic flow vortices.This phenomenon does not occur in water droplets in the absence of polymers.The gold nanoparticles underwent Brownian-like motion at the center of the PEO droplet or water droplet owing to the low perturbation of the flow field.At the late stage of pinning of the PEO droplets,the motion showed multiple reverses in the direction of the gold nanoparticles,indicating the complexity of the flow field.This study enhances the understanding of the drying dynamics of polymer solution droplets and offers valuable insights into the fabrication of surface materials.
基金supported by a National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.2018R1A6A1A03025708).
文摘Aqueous zinc(Zn)-ion batteries(AZIBs)have gained significant interest in energy storage due to several unique advantages.Utilizing waterbased electrolytes enhances environmental sustainability,while the abundance and affordability of Zn offer economic benefits.Manganese(Mn)-based materials,commonly used as cathodes in these batteries,provide high theoretical capacity,high electrical conductivity,and good structural stability.However,these materials suffer from capacity degradation over repeated cycles due to structural collapse and limited conductivity.To address this problem,we synthesized a magnesium(Mg)-and Mn-based composite,Mg^(2+)-Mn_(3)O_(4),using the hydrothermal method with an optimized amount of ammonium hydroxide(NH_(4)OH)solution.This approach effectively stabilizes the structure during cycling,enhancing both capacity retention and conductivity.The Zn^(2+)/H+intercalation/deintercalation process was confirmed by experimental results and ex-situ X-ray diffraction analysis,which demonstrates that Mg^(2+),along with optimized NH_(4)OH amount,prevents structural collapse and improves conductivity.Under optimal process conditions,the composite electrode(Mg^(2+)-Mn_(3)O_(4)–8 ml)achieved a capacity of 173.58 mA h g^(-1) at 0.5 A g^(-1),with excellent rate performance of 71.39 mA h g^(-1) at 10 A g^(-1).Remarkably,even at 5 A g^(-1),the electrode maintained a capacity of 86.87 mA h g^(-1) over 2100 cycles,underscoring the role of Mg^(2+)and NH_(4)OH in enhancing the reversible insertion/extraction stability of Zn^(2+)in Mn-based layered materials.This study presents a novel strategy for metal-ion incorporation in Mn-based AZIBs,offering insights into the optimization of cathode materials and advancing research on associated storage mechanisms.
基金Project supported by the State Key Research Project of Shandong Natural Science Foundation(ZR2020KB019)the fund of"Two-Hundred Talent"Plan of Yantai City+1 种基金the National Natural Science Foundation of China(11974013)the Natural Science Foundation of Fujian Province(2022J011270)。
文摘The low-dose X-ray induced long afterglow near infrared(NIR)luminescence from Cr^(3+)doped Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions was investigated.The structure analysis shows the good formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions,which possesses a cubic spinel structure with Fd3m space group.The formation of Zn_(1-x)Cd_(x)Ga_(2)O_(4)spinel solid solutions induces the obvious increase of long afterglow near infrared luminescence excited by low-dose X-ray,When the content of doped Cd^(2+)reaches 0.1,the low-dose X-ray induced long afterglow NIR luminescence is the maximum.More importantly,only 5 s Xray irradiation can induce more than 6 h NIR afterglow emission,of which the afterglow luminescent intensity is still 5 times stronger than the background intensity after 6 h.The thermoluminescent results show that under the 5 s exposure of X-ray,the trap density of Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):Cr^(3+)is much higher than that of ZnGa_(2)O_(4):Cr^(3+).The replacement of Cd^(2+)ions with large radius at Zn^(2+)sites causes the increase of de fects and dislocations,which results in the obvious increase of trap co ncentrations.And the addition of high-z number elements Cd^(2+)would enhance the X-ray absorption of the solid solutions,which thus can be easily excited by low-dose X-ray.Zn_(0.9)Cd_(0.1)Ga_(2)O_(4):1%Cr^(3+)solid solution is a potential candidate of lowdose X-ray induced long afterglow luminescent materials.
基金funding support from the National Key R&D Program of China(2020YFC1909105)the 2023 Basic Research Foundation Project for Universities in the Inner Mongolia Autonomous Region(2023RCTD006)+1 种基金the Major Science and Technology Project of Inner Mongolia Autonomous Region(2021ZD0016)the National Natural Science Foundation of China(51664044).
文摘To separate the phosphorus-containing phase from steel slag,the effects of B_(2)O_(3)and Na_(2)B_(4)O_(7)on the enrichment of phosphorus-containing phases in Ca_(2)SiO_(4)–Ca_(3)(PO_(4))_(2)(C_(2)S–C_(3)P)solid solution were comparatively analyzed through theoretical calculations and experimental investigations.The results indicate that the optimum reaction temperature between B_(2)O_(3)and C_(2)S–C_(3)P is 800℃.The phase compositions of C_(2)S–C_(3)P equilibrium system with 5 wt.%B_(2)O_(3)at 800℃ included Ca_(3)(PO_(4))_(2),CaSiO_(3)and Ca11B_(2)Si_(4)O_(22),among which the content of Ca_(3)(PO_(4))_(2)was the highest.For C_(2)S–C_(3)P with 5 wt.%Na_(2)B_(4)O_(7)equilibrium system,Ca_(3)(PO_(4))_(2),CaSiO_(3),Ca11B_(2)Si_(4)O_(22)and Na_(2)Ca_(2)P_(2)O_(8)were independent at 390–690℃.Ca_(3)(PO_(4))_(2)and Ca_(2)SiO_(4)precipitated in the solid solution when the addition of B_(2)O_(3)was more than 6 wt.%,and the content of Ca_(3)(PO_(4))_(2)raised with the increase in the addition of B_(2)O_(3).The main phases in the C_(2)S–C_(3)P solid solution with Na_(2)B_(4)O_(7)were(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],Ca_(2)SiO_(4)and Na_(3)Ca_(6)(PO_(4))_(5)at 650℃.And when the addition of Na_(2)B_(4)O_(7)exceeded 6 wt.%,the content of Na_(3)Ca_(6)(PO_(4))_(5)increased significantly.There was no precipitation of Ca_(3)(PO_(4))_(2)or boron-containing phase in the samples with Na_(2)B_(4)O_(7),but a small proportion of Ca_(3)(PO_(4))_(2)transformed into(Ca_(2)SiO_(4))0.05[Ca_(3)(PO_(4))_(2)],and Ca^(2+)was partially replaced by Na^(+)to generate Na_(3)Ca_(6)(PO_(4))_(5).As a result,the temperature for Na_(2)B_(4)O_(7)to enrich the phosphorus-containing phase in C_(2)S–C_(3)P solid solution was lower than that for B_(2)O_(3).However,the grade of the phosphorus-containing phase for Na_(2)B_(4)O_(7)was lower than that for B_(2)O_(3).
文摘The preparation of Cu nanoparticles by the aqueous solution reduction method was investigated. The effects of different reaction parameters on the preparation of Cu nanoparticles were studied. The optimum conditions for preparing well-dispersed nanoparticles were found as follows: 0.4 mol/L NaBH4 was added into solution containing 0.2 mol/L Cu2+, 1.0% gelatin dispersant in mass fraction, and 1.2 mol/L NH3?H2O at pH 12 and 313 K. In addition, a series of experiments were performed to discover the reaction process. NH3?H2O was found to be able to modulate the reaction process. At pH=10, Cu2+ was transformed to Cu(NH3)42+ as precursor after the addition of NH3?H2O, and then Cu(NH3)42+ was reduced by NaBH4 solution. At pH=12, Cu2+ was transformed to Cu(OH)2 as precursor after the addition of NH3?H2O, and Cu(OH)2 was then reduced by NaBH4 solution.
基金The National Natural Science Foundation of China(No.11047005)the Science Foundation of Southeast University
文摘Due to the negligible non-perturbation effect in the low-energy region, quantum chromodynamics （QCD） is limited to be applied to hadron problems in particle physics. However, QED has mature non-perturbation models which can be applied to Fermi acting-energy between quark and gluon. This paper applies quantum electrodynamics in 2 ＋ 1 dimensions （QED3） to the Fermi condensation problems. First, the Dyson-Schwinger equation which the fermions satisfy is constructed, and then the Fermi energy gap is solved. Theoretical calculations show that within the chirality limit, there exist three solutions for the energy gap; beyond the chirality limit, there are two solutions; all these solutions correspond to different fermion condensates. It can be concluded that the fermion condensates within the chirality limit can be used to analyze the existence of antiferromagnetic, pseudogap, and superconducting phases, and two fermion condensates are discovered beyond the chirality limit.
