The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were ch...The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were characterized by means of X-ray diffraction (XRD), Raman spectra, scanning electron microscope (SEM) and vibrating sample magnetometer (VSM). Recently, the studies focus on how to improve the dispersion of composite particle and achieve good magnetic performance. Hence effects of the volume ratio of tetraethyl orthosilicate (TEOS) and magnetite colloid on the structural, morphological and magnetic properties of the composite nanoparticles were systematically investi-gated. The results revealed that the Fe3O4@SiO2 had better thermal stability and dispersion than the magnetite nanoparticles. Furthermore, the particle size and magnetic property of the Fe3O4@SiO2 composite nanoparticles can be adjusted by changing the volume ratio of TEOS and magnetite colloid.展开更多
Compared with Cu/Al_(2)O_(3)composites,high-strength Cu/Al_(2)O_(3)composites usually exhibit obviously deteriorated electrical conductivity.A chemical and mechanical alloying-based strategy was adopted to fabricate u...Compared with Cu/Al_(2)O_(3)composites,high-strength Cu/Al_(2)O_(3)composites usually exhibit obviously deteriorated electrical conductivity.A chemical and mechanical alloying-based strategy was adopted to fabricate ultrafine composite powders with lowcontent reinforcement and constructed a combined structure of Cu ultrafine powders covered with in-situ Al_(2)O_(3)nanoparticles.After consolidation at a relatively lower sintering temperature of 550℃,high-volume-fraction ultrafine grains were introduced into the Cu/Al_(2)O_(3)composite,and many in-situ Al_(2)O_(3)nanoparticles with an average size of 11.7±7.5 nm were dispersed homogeneously in the Cu grain.Results show that the composite demonstrates an excellent balance of high tensile strength(654±1 MPa)and high electrical conductivity(84.5±0.1%IACS),which is ascribed to the synergistic strengthening effect of ultrafine grains,dislocations,and in-situ Al_(2)O_(3)nanoparticles.This approach,which utilizes ultrafine composite powder with low-content reinforcement as a precursor and employs low-temperature and high-pressure sintering subsequently,may hold promising potential for large-scale industrial production of high-performance oxide dispersion strengthened alloys.展开更多
Nanoparticles and microparticles reinforced Al matrix composites were fabricated by spark plasma sintering, and the microstructure and tribological properties were investigated systemically. The nano-Al2O3 particle an...Nanoparticles and microparticles reinforced Al matrix composites were fabricated by spark plasma sintering, and the microstructure and tribological properties were investigated systemically. The nano-Al2O3 particle and micro-Al2O3 particle uniformly dispersed in Al matrix composites. The introduction of nanoparticles is beneficial to the decrease of friction coefficient and wear rate, while microparticles are responsible to the high friction coefficient, resulting in the abrasive wear. With the introduction of both nanoparticles and microparticles, their synergic effect will lead to the variation of tribological behavior.展开更多
MXenes have attracted increasing research enthusiasm owing to their unique physical and chemical properties.Although MXenes exhibit exciting potential in cations adsorption due to their unique surface groups,the adsor...MXenes have attracted increasing research enthusiasm owing to their unique physical and chemical properties.Although MXenes exhibit exciting potential in cations adsorption due to their unique surface groups,the adsorption capacity is limited by the low specific surface area and undeveloped porosity.Our work aims at enhancing the adsorption performance of a well-known MXene,Ti3C2Tx,for methylene blue(MB)by decorating tiny ZIF-8 nanoparticles in the interlayer.After the incorporation of ZIF-8,suitable interspace in the layers resulting from the distribution of tiny ZIF-8 appears.When employing in MB,the adsorption capacity of composites can reach up to 107 mg·g^(-1) while both ZIF-8(3 mg·g^(-1))and Ti_(3)C_(2)Tx(9mg·g^(-1))show nearly no adsorption capacity.The adsorption mechanism was explored,and the good adsorption capacity is caused by the synergistic effect of ZIF-8 and Ti_(3)C_(2)Tx,for neither of them is of suitable interspace or surface groups for MB adsorption.Our work might pave the way for constructing functional materials based on the introduction of nanoparticles into layered materials for various adsorption applications.展开更多
Fe_2O_3 sol with the particle diameter of 3-5 nm was flocculated by the addition of SDS, and the flocculate formed was redispersed by the further addition of that surfactant. Thus the surfactant bilayer was formed on ...Fe_2O_3 sol with the particle diameter of 3-5 nm was flocculated by the addition of SDS, and the flocculate formed was redispersed by the further addition of that surfactant. Thus the surfactant bilayer was formed on the surface of Fe_2O_3. The emulsion polymerization of styrene(St) adsolubilized on the surfactant adsorbed bilayer was carried out by initiator potassium persulfate(KPS). The UV-Vis and surface photovoltage spectra(SPS) indicate that the Fe_2O_3 particles were encapsulated in polystyrene(PSt) successfully.展开更多
Al2O3-ZrO2 with a high level of hardness and toughness is known as ceramic steel. Due to its unique properties it can be used as a reinforcement in fabrication of metal matrix composites. In this study, nanoparticles ...Al2O3-ZrO2 with a high level of hardness and toughness is known as ceramic steel. Due to its unique properties it can be used as a reinforcement in fabrication of metal matrix composites. In this study, nanoparticles of Al2O3-10% ZrO2 with an average size of 80 nm were used to fabricate Al matrix composites containing 0.5, 1, 1.5 and 2 wt.% of the reinforcement. The fabrication route was stir casting at 850?C. There is no report about usage of this reinforcement in fabrication of composites in the literature. The microstructures of the as-cast composites were studied by scanning electron microscope (SEM). Density measurement, hardness and tensile properties were carried out to identify the mechanical properties of the composites. The results revealed that with increasing the reinforcement content, density decreased while yield, ultimate tensile strength and compressive strength increased. Also, hardness increased by increasing the reinforcement content up to 1 wt.% Al2O3-10% ZrO2 but it decreased in the samples containing higher amounts of reinforcement.展开更多
A novel electrochemical detection approach for platelet-derived growth factor（PDGF） via ＂sandwich＂structure is reported in this paper. 3D-4MgCO3 Mg（OH）2 4H2O-Au NPs inorganic hybrid composite was utilized as imm...A novel electrochemical detection approach for platelet-derived growth factor（PDGF） via ＂sandwich＂structure is reported in this paper. 3D-4MgCO3 Mg（OH）2 4H2O-Au NPs inorganic hybrid composite was utilized as immobilized substrate for sensitive PDGF detection and Pt-Au bimetallic nanoparticles were labelled on PDGF aptamer to indirectly detect PDGF for the first time. The proposed aptasensor exhibited a high catalytic efficiency towards reduction of H2O2, hence the sensitive detection of PDGF was achieved.Results showed that the aptasensor exhibited excellent linear response to PDGF, in the range of 0.1 pg/m L–10 ng/m L（4 fmol/L–400 pmol/L）, with detection limit of 0.03 pg/m L（1.2 fmol/L）.展开更多
Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chem...Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chemical properties.In this work,MoS_(2)core-shell nanoparticles were first prepared through the liquid-phase processing of bulk MoS2by a femtosecond laser.The core of prepared nanoparticles was incompletely and weakly crystalline MoS_(2);the shell of prepared nanoparticles was highly crystalline MoS_(2),which wrapped around the core layer by layer.The femtosecond laser simultaneously achieved liquid-phase ablation and light exfoliation.The formation mechanism of the core-shell nanoparticles is to prepare the nanonuclei first by laser liquid-phase ablation and then the nanosheets by light exfoliation;the nanosheets will wrap the nanonuclei layer by layer through van der Waals forces to form core-shell nanoparticles.The MoS_(2)core-shell nanoparticles,because of Mo-S bond breakage and recombination,have high chemical activity for chemical catalysis.Afterward,the nanoparticles were used as a reducing agent to directly prepare three-dimensional(3D)Au-MoS_(2)micro/nanostructures,which were applied as surface-enhanced Raman spectroscopy(SERS)substrates to explore chemical sensing activity.The ultrahigh enhancement factor(1.06×10^(11)),ultralow detection limit(10-13M),and good SERS adaptability demonstrate highly sensitive SERS activity,great ability of ultralow concentration detection,and ability to detect diverse analytes,respectively.This work reveals the tremendous potential of 3D Au-MoS_(2)composite structures as excellent SERS substrates for chemical and biological sensing.展开更多
文摘The Fe3O4@SiO2 composite nanoparticles were obtained from as-synthesized magnetite (Fe3O4) nanoparticles through the modified St?ber method. Then, the Fe3O4 nanoparticles and Fe3O4@SiO2 composite nanoparticles were characterized by means of X-ray diffraction (XRD), Raman spectra, scanning electron microscope (SEM) and vibrating sample magnetometer (VSM). Recently, the studies focus on how to improve the dispersion of composite particle and achieve good magnetic performance. Hence effects of the volume ratio of tetraethyl orthosilicate (TEOS) and magnetite colloid on the structural, morphological and magnetic properties of the composite nanoparticles were systematically investi-gated. The results revealed that the Fe3O4@SiO2 had better thermal stability and dispersion than the magnetite nanoparticles. Furthermore, the particle size and magnetic property of the Fe3O4@SiO2 composite nanoparticles can be adjusted by changing the volume ratio of TEOS and magnetite colloid.
基金Foundation of Northwest Institute for Non-ferrous Metal Research(YK2020-9,ZZXJ2203)Capital Projects of Financial Department of Shaanxi Province(YK22C-12)+4 种基金National Natural Science Foundation of China(62204207)Innovation Capability Support Plan in Shaanxi Province of China(2022KJXX-82,2023KJXX-083)Natural Science Foundation of Shaanxi Province(2022JQ-332)Shaanxi Innovative Research Team for Key Science and Technology(2023-CX-TD-46)Key Research and Development Projects of Shaanxi Province(2024GX-YBXM-351)。
文摘Compared with Cu/Al_(2)O_(3)composites,high-strength Cu/Al_(2)O_(3)composites usually exhibit obviously deteriorated electrical conductivity.A chemical and mechanical alloying-based strategy was adopted to fabricate ultrafine composite powders with lowcontent reinforcement and constructed a combined structure of Cu ultrafine powders covered with in-situ Al_(2)O_(3)nanoparticles.After consolidation at a relatively lower sintering temperature of 550℃,high-volume-fraction ultrafine grains were introduced into the Cu/Al_(2)O_(3)composite,and many in-situ Al_(2)O_(3)nanoparticles with an average size of 11.7±7.5 nm were dispersed homogeneously in the Cu grain.Results show that the composite demonstrates an excellent balance of high tensile strength(654±1 MPa)and high electrical conductivity(84.5±0.1%IACS),which is ascribed to the synergistic strengthening effect of ultrafine grains,dislocations,and in-situ Al_(2)O_(3)nanoparticles.This approach,which utilizes ultrafine composite powder with low-content reinforcement as a precursor and employs low-temperature and high-pressure sintering subsequently,may hold promising potential for large-scale industrial production of high-performance oxide dispersion strengthened alloys.
基金Funded by the National Key R&D Program of China(No.2017YFB1103500)National Science and Technology Major Project(No.2017-VI-0007-0077)the National Natural Science Foundation of China(Nos.51632007,51672218)
文摘Nanoparticles and microparticles reinforced Al matrix composites were fabricated by spark plasma sintering, and the microstructure and tribological properties were investigated systemically. The nano-Al2O3 particle and micro-Al2O3 particle uniformly dispersed in Al matrix composites. The introduction of nanoparticles is beneficial to the decrease of friction coefficient and wear rate, while microparticles are responsible to the high friction coefficient, resulting in the abrasive wear. With the introduction of both nanoparticles and microparticles, their synergic effect will lead to the variation of tribological behavior.
基金the financial support of this work by the National Natural Science Foundation of China (21878149, 22078155, and 21808110)the project funded by China Postdoctoral Science Foundation (2020M681567)+1 种基金Postgraduate Research & Practice Innovation Program of Jiangsu Province (SJCX20_0358)the Natural Science Foundation of Jiangsu Province (BK20180709)
文摘MXenes have attracted increasing research enthusiasm owing to their unique physical and chemical properties.Although MXenes exhibit exciting potential in cations adsorption due to their unique surface groups,the adsorption capacity is limited by the low specific surface area and undeveloped porosity.Our work aims at enhancing the adsorption performance of a well-known MXene,Ti3C2Tx,for methylene blue(MB)by decorating tiny ZIF-8 nanoparticles in the interlayer.After the incorporation of ZIF-8,suitable interspace in the layers resulting from the distribution of tiny ZIF-8 appears.When employing in MB,the adsorption capacity of composites can reach up to 107 mg·g^(-1) while both ZIF-8(3 mg·g^(-1))and Ti_(3)C_(2)Tx(9mg·g^(-1))show nearly no adsorption capacity.The adsorption mechanism was explored,and the good adsorption capacity is caused by the synergistic effect of ZIF-8 and Ti_(3)C_(2)Tx,for neither of them is of suitable interspace or surface groups for MB adsorption.Our work might pave the way for constructing functional materials based on the introduction of nanoparticles into layered materials for various adsorption applications.
基金Supported by the National Natural Science Foundation of China(No. 2 99730 2 6 and 2 0 0 75 0 2 8) ,K.C.Wang Post-Doctoral Research Award Fund of Chinese Academ y of Sciences,and China Postdoctoral Science Foundation
文摘Fe_2O_3 sol with the particle diameter of 3-5 nm was flocculated by the addition of SDS, and the flocculate formed was redispersed by the further addition of that surfactant. Thus the surfactant bilayer was formed on the surface of Fe_2O_3. The emulsion polymerization of styrene(St) adsolubilized on the surfactant adsorbed bilayer was carried out by initiator potassium persulfate(KPS). The UV-Vis and surface photovoltage spectra(SPS) indicate that the Fe_2O_3 particles were encapsulated in polystyrene(PSt) successfully.
文摘Al2O3-ZrO2 with a high level of hardness and toughness is known as ceramic steel. Due to its unique properties it can be used as a reinforcement in fabrication of metal matrix composites. In this study, nanoparticles of Al2O3-10% ZrO2 with an average size of 80 nm were used to fabricate Al matrix composites containing 0.5, 1, 1.5 and 2 wt.% of the reinforcement. The fabrication route was stir casting at 850?C. There is no report about usage of this reinforcement in fabrication of composites in the literature. The microstructures of the as-cast composites were studied by scanning electron microscope (SEM). Density measurement, hardness and tensile properties were carried out to identify the mechanical properties of the composites. The results revealed that with increasing the reinforcement content, density decreased while yield, ultimate tensile strength and compressive strength increased. Also, hardness increased by increasing the reinforcement content up to 1 wt.% Al2O3-10% ZrO2 but it decreased in the samples containing higher amounts of reinforcement.
基金supported by the National Natural Science Foundation of China(Nos.214650236,21165023)
文摘A novel electrochemical detection approach for platelet-derived growth factor（PDGF） via ＂sandwich＂structure is reported in this paper. 3D-4MgCO3 Mg（OH）2 4H2O-Au NPs inorganic hybrid composite was utilized as immobilized substrate for sensitive PDGF detection and Pt-Au bimetallic nanoparticles were labelled on PDGF aptamer to indirectly detect PDGF for the first time. The proposed aptasensor exhibited a high catalytic efficiency towards reduction of H2O2, hence the sensitive detection of PDGF was achieved.Results showed that the aptasensor exhibited excellent linear response to PDGF, in the range of 0.1 pg/m L–10 ng/m L（4 fmol/L–400 pmol/L）, with detection limit of 0.03 pg/m L（1.2 fmol/L）.
基金supported by the National Natural Science Foundation of China(Grant Nos.52105427,U2037205,52005041,51575053,and 51775047)Research Foundation from Ministry of Education of China(Grant No.6141A02033123)+2 种基金Beijing Municipal Commission of Education(Grant No.KM201910005003)Knowledge Innovation Program of Wuhan-Basic Research(Grant No.2022010801010349)Scientific Research Project of Hubei Provincial Department of Education(Grant No.B2022055)。
文摘Molybdenum disulfide(MoS_(2))-based nanostructures are highly desirable for applications such as chemical and biological sensing,photo/electrochemical catalysis,and energy storage due to their unique physical and chemical properties.In this work,MoS_(2)core-shell nanoparticles were first prepared through the liquid-phase processing of bulk MoS2by a femtosecond laser.The core of prepared nanoparticles was incompletely and weakly crystalline MoS_(2);the shell of prepared nanoparticles was highly crystalline MoS_(2),which wrapped around the core layer by layer.The femtosecond laser simultaneously achieved liquid-phase ablation and light exfoliation.The formation mechanism of the core-shell nanoparticles is to prepare the nanonuclei first by laser liquid-phase ablation and then the nanosheets by light exfoliation;the nanosheets will wrap the nanonuclei layer by layer through van der Waals forces to form core-shell nanoparticles.The MoS_(2)core-shell nanoparticles,because of Mo-S bond breakage and recombination,have high chemical activity for chemical catalysis.Afterward,the nanoparticles were used as a reducing agent to directly prepare three-dimensional(3D)Au-MoS_(2)micro/nanostructures,which were applied as surface-enhanced Raman spectroscopy(SERS)substrates to explore chemical sensing activity.The ultrahigh enhancement factor(1.06×10^(11)),ultralow detection limit(10-13M),and good SERS adaptability demonstrate highly sensitive SERS activity,great ability of ultralow concentration detection,and ability to detect diverse analytes,respectively.This work reveals the tremendous potential of 3D Au-MoS_(2)composite structures as excellent SERS substrates for chemical and biological sensing.
