A nanoheterojunction composite photocatalyst Bi2O3/TiO2 working under visible-light （λ≥ 420 nm） was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2 molar ratio. Maleic acid was emplo...A nanoheterojunction composite photocatalyst Bi2O3/TiO2 working under visible-light （λ≥ 420 nm） was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2 molar ratio. Maleic acid was employed as an organic binder to unite Bi2O3 and TiO2 nanoparticles. The SEM, TEM, XRD and diffuse reflectance spectra were utilized to characterize the prepared Bi2O3/TiO2 nanoheterojunction. The nanocomposite exhibited unusual high photocatalytic activity in decomposing 2-propanol in gas phase and phenol in aqueous phase and, evolution of CO2 under visible light irradiation while the end members exhibited low photocatalytic activity. The composite was optimized to 5 mol% Bi2O3/TiO2. The remarkable high photocatalytic efficiency originates from the unique relative energy band position of Bi2O3 and TiO2 as well as the absorption of visible light by Bi2O3.展开更多
A novel In203/Bi24O31Br10 composite photocatalyst, where In2O3 nanoparticleswith the diameter of about 5-10 nm were tightly attached on the surface of Bi24O31Br10 plates, wasprepared by using hydrolysis, impregnation ...A novel In203/Bi24O31Br10 composite photocatalyst, where In2O3 nanoparticleswith the diameter of about 5-10 nm were tightly attached on the surface of Bi24O31Br10 plates, wasprepared by using hydrolysis, impregnation method and post-thermal process. Photocatalyticactivity was evaluated by the degradation of Rhodamine B under the visible light irradiation.Effects of the contents of In203 nanoparticles on the optical property and photocatalytic activity of In203/Bi24O31Br10 composite were also investigated. Compared with neat In203 and Bi24O31Brlomaterials, 15In203/Bi24O31Br10 composite exhibits the best photocatalytic activity owing to theefficient separation of photogenerated electron and hole pairs, which is evidenced byphotoluminence spectra. More than 95% of Rhodamine B solution can be degraded by15In203/Bi24O31Brlo sample in 30 min.展开更多
Bi2(Te,Se)3 alloys are conventional commercial thermoelectric materials for solid-state refrigeration around room temperature.In recent years,much attention has been paid to various advanced thermoelectric composite m...Bi2(Te,Se)3 alloys are conventional commercial thermoelectric materials for solid-state refrigeration around room temperature.In recent years,much attention has been paid to various advanced thermoelectric composite materials due to the unique thermoelectric properties.In this work,Bi2Se3/TiO2 composites were prepared by hot pressing the plate-like Bi2Se3 powders coated in situ with hydrolyzed hytetabutyl-n-butyl titanate(TNBT),and therefore numerous TiO2 in micrometer size could be formed on the interface of Bi2Se3 grains.The carrier concentration in Bi2Se3 matrix is optimized subject to the addition of n-type semiconductor TiO2,contributing to a significant improved power factor.In the meantime,the lattice thermal conductivity is also suppressed due to the enhanced phonon scattering at Bi2Se3/TiO2 interface and amorphous TiO2 particles.As a consequence,a peak figure of merit(zT)of 0.41 is obtained at 525 K in Bi2Se3/15 mol%TiO2 composites,nearly 50%augment over the pristine Bi2Se3 binary compound.展开更多
Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron...Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron microscopy（FE-SEM） and UV-vis diffuse reflectance spectroscopy（DRS）. When BN： BZN=0.1 mole ratio, the BN/BZN composite showed the best visible-light-driven photocatalytic performance, which decomposed nearly 100% of Rh B（10 ppm, p H=3-4） within 40 min. The results demonstrated that in-situ solid state synthesis of BN/BZN composites could be an efficient strategy to develop new photocatalyst for environmental remediation.展开更多
A series of TiO2/Bi2O3 heterojunction microfibers have been fabricated using cotton fibers as bio-templates, and characterized by XRD, SEM and UV-Vis techniques. Results reveal that Bi2O3 in the TiO2/Bi2O3 sample is a...A series of TiO2/Bi2O3 heterojunction microfibers have been fabricated using cotton fibers as bio-templates, and characterized by XRD, SEM and UV-Vis techniques. Results reveal that Bi2O3 in the TiO2/Bi2O3 sample is assigned to monoclinic and tetragonal mix-crystal phase. Fibers lengths can reach several micrometers and diameters range from 0.5 μm to 3 μm. Compared with pure TiO2 and Bi2O3, TiO2/Bi2O3 samples display better absorption in visible light region. Photocatalytic activity was evaluated by degradation of MB under visible light irradiation. TiO2/Bi2O3 microfibers exhibite much higher activity than pure TiO2 and Bi2O3, and 22.84%TiO2/Bi2O3 can achieve the decomposition of about 95%MB, which is attributed to synergistic effects of the strong visible-light absorption of TiO2/Bi2O3 microfibers and the heterojunction formed between TiO2 and Bi2O3.展开更多
Ceramic tapes, containing Al2O3-25 wt pct TiB2(B) and Al2O3-25 wt pct nano-TiC (c), have been obtained by tape casting process. Numerous tapes (about 60～80 tapes) were prepared by stacking in turn the composition (B)...Ceramic tapes, containing Al2O3-25 wt pct TiB2(B) and Al2O3-25 wt pct nano-TiC (c), have been obtained by tape casting process. Numerous tapes (about 60～80 tapes) were prepared by stacking in turn the composition (B) and (C), laminating under 10 MPa pressure, eliminating the solvent and burning out the polymer additives. The final green bodies were hot pressed at 1750℃ and 30 MPa. The composite has a bending strength of 568 MPa and a fracture toughness of 5.8 M Pa·m1/2. SEM analysis exhibits that Al2O3 particle growth was inhibited by TiC particles in C. but TiB2 particles could not hinder Al2O3 growth in B. The curves of GTA indicates that all organic additives could be removed completely above 600℃展开更多
文摘A nanoheterojunction composite photocatalyst Bi2O3/TiO2 working under visible-light （λ≥ 420 nm） was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2 molar ratio. Maleic acid was employed as an organic binder to unite Bi2O3 and TiO2 nanoparticles. The SEM, TEM, XRD and diffuse reflectance spectra were utilized to characterize the prepared Bi2O3/TiO2 nanoheterojunction. The nanocomposite exhibited unusual high photocatalytic activity in decomposing 2-propanol in gas phase and phenol in aqueous phase and, evolution of CO2 under visible light irradiation while the end members exhibited low photocatalytic activity. The composite was optimized to 5 mol% Bi2O3/TiO2. The remarkable high photocatalytic efficiency originates from the unique relative energy band position of Bi2O3 and TiO2 as well as the absorption of visible light by Bi2O3.
基金supported by the Natural Science Foundation of Fujian Province(2016J01740)National Natural Science Foundation of China(21473096)the Outstanding Youth Scientific Research Cultivation Plan in Fujian Province University,and the guiding project of Fujian Province(2016Y0073)
文摘A novel In203/Bi24O31Br10 composite photocatalyst, where In2O3 nanoparticleswith the diameter of about 5-10 nm were tightly attached on the surface of Bi24O31Br10 plates, wasprepared by using hydrolysis, impregnation method and post-thermal process. Photocatalyticactivity was evaluated by the degradation of Rhodamine B under the visible light irradiation.Effects of the contents of In203 nanoparticles on the optical property and photocatalytic activity of In203/Bi24O31Br10 composite were also investigated. Compared with neat In203 and Bi24O31Brlomaterials, 15In203/Bi24O31Br10 composite exhibits the best photocatalytic activity owing to theefficient separation of photogenerated electron and hole pairs, which is evidenced byphotoluminence spectra. More than 95% of Rhodamine B solution can be degraded by15In203/Bi24O31Brlo sample in 30 min.
基金financially supported by the National Natural Science Foundation of China(Nos.51871199 and 61534001)。
文摘Bi2(Te,Se)3 alloys are conventional commercial thermoelectric materials for solid-state refrigeration around room temperature.In recent years,much attention has been paid to various advanced thermoelectric composite materials due to the unique thermoelectric properties.In this work,Bi2Se3/TiO2 composites were prepared by hot pressing the plate-like Bi2Se3 powders coated in situ with hydrolyzed hytetabutyl-n-butyl titanate(TNBT),and therefore numerous TiO2 in micrometer size could be formed on the interface of Bi2Se3 grains.The carrier concentration in Bi2Se3 matrix is optimized subject to the addition of n-type semiconductor TiO2,contributing to a significant improved power factor.In the meantime,the lattice thermal conductivity is also suppressed due to the enhanced phonon scattering at Bi2Se3/TiO2 interface and amorphous TiO2 particles.As a consequence,a peak figure of merit(zT)of 0.41 is obtained at 525 K in Bi2Se3/15 mol%TiO2 composites,nearly 50%augment over the pristine Bi2Se3 binary compound.
基金Funded by the National Natural Science Foundation of China(No.51662005)the Guangxi Natural Science Foundation(No.2014GXNSFFA118004)
文摘Series Bi3NbO7/Bi2Zn（2/3）Nb（4/3）O7 （BN/BZN） composites were synthesized through a facile solid state reaction method. The products were characterized by X-ray diffraction（XRD）, field emission scanning electron microscopy（FE-SEM） and UV-vis diffuse reflectance spectroscopy（DRS）. When BN： BZN=0.1 mole ratio, the BN/BZN composite showed the best visible-light-driven photocatalytic performance, which decomposed nearly 100% of Rh B（10 ppm, p H=3-4） within 40 min. The results demonstrated that in-situ solid state synthesis of BN/BZN composites could be an efficient strategy to develop new photocatalyst for environmental remediation.
基金V. ACKNOWLEDGEMENTS This work was supported by the Scientific Research Program Funded by Shaanxi Provincial Education Department （No.2013JK0690）, and the Shaanxi Province Natural Science Foundation （No.2013JM2013）, the National Natural Science Foundation of China （No.21203160）, and the Special Research Fund of Xianyang Normal University （No. 11XSYK204）.
文摘A series of TiO2/Bi2O3 heterojunction microfibers have been fabricated using cotton fibers as bio-templates, and characterized by XRD, SEM and UV-Vis techniques. Results reveal that Bi2O3 in the TiO2/Bi2O3 sample is assigned to monoclinic and tetragonal mix-crystal phase. Fibers lengths can reach several micrometers and diameters range from 0.5 μm to 3 μm. Compared with pure TiO2 and Bi2O3, TiO2/Bi2O3 samples display better absorption in visible light region. Photocatalytic activity was evaluated by degradation of MB under visible light irradiation. TiO2/Bi2O3 microfibers exhibite much higher activity than pure TiO2 and Bi2O3, and 22.84%TiO2/Bi2O3 can achieve the decomposition of about 95%MB, which is attributed to synergistic effects of the strong visible-light absorption of TiO2/Bi2O3 microfibers and the heterojunction formed between TiO2 and Bi2O3.
文摘Ceramic tapes, containing Al2O3-25 wt pct TiB2(B) and Al2O3-25 wt pct nano-TiC (c), have been obtained by tape casting process. Numerous tapes (about 60～80 tapes) were prepared by stacking in turn the composition (B) and (C), laminating under 10 MPa pressure, eliminating the solvent and burning out the polymer additives. The final green bodies were hot pressed at 1750℃ and 30 MPa. The composite has a bending strength of 568 MPa and a fracture toughness of 5.8 M Pa·m1/2. SEM analysis exhibits that Al2O3 particle growth was inhibited by TiC particles in C. but TiB2 particles could not hinder Al2O3 growth in B. The curves of GTA indicates that all organic additives could be removed completely above 600℃
