Globally,mealtimes provide key insights into cultural and social values and practices.We examine mealtime environments and eating practices in two different African settings using quantitative observational and questi...Globally,mealtimes provide key insights into cultural and social values and practices.We examine mealtime environments and eating practices in two different African settings using quantitative observational and questionnaire data.Participating families(N=80)were recruited from two rural locations in Zambia and Kenya.Results following descriptive analysis showed that meals are typically taken as a family in a sociable context,providing opportunities to nurture children’s positive behaviours.In both communities,mothers(71.25%)were most likely to be present and typically prepared meals and provided the food.We observed a few distractions being used during mealtimes,and children finished their food with little to no conflict.Plate sharing varied across the two sites and was more common in Zambia,where we also observed more traditional practices such as eating with hands(as opposed to cutlery)and sitting on mats on the ground(as opposed to seated on chairs or sofas).Overall,our findings suggest more similarities in the cultural and social values across the two African contexts despite slight differences in mealtime practices.In particular,positive mealtime behaviours(little food refusal,lack of conflict)were common across all contexts,regardless of the extent to which traditional practices(such as plate-sharing and sitting on the floor)were used.Findings align with Family Systems theory,which states that the family is understood best by conceptualizing it as a complex,dynamic,and changing collection of parts,subsystems,and family members.展开更多
To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by...To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.展开更多
The functionally graded materials(FGMs)are obtained by various processes.Although a few FGMs are obtained naturally,such as oyster,pearl,and bamboo,additive manufacturing(AM),known as 3D printing,is a net-shaped manuf...The functionally graded materials(FGMs)are obtained by various processes.Although a few FGMs are obtained naturally,such as oyster,pearl,and bamboo,additive manufacturing(AM),known as 3D printing,is a net-shaped manufacturing process employed to manufacture complex 3D objects without tools,molds,assembly,and joining.Currently,commercial AM techniques mostly use homogeneous composition with simplified geometric descriptions,employing a single material across the entire component to achieve functional graded additive manufacturing(FGAM),in contrast to multi-material FGAM with heterogeneous structures.FGMs are widely used in various fields due to their mechanical property advantages.Because FGM plays a significant role in the industrial production,the characteristics and mechanical behaviour of FGMs prepared by AM were reviewed.In this review,the research on FGMs and AM over the past 30 years was reviewed,suggesting that future researchers should focus on the application of artificial intelligence and machine learning technologies in industry to optimize the process parameters of different gradient systems.展开更多
This study aimed to explore the application effect of the medical and nursing integration working mode in children with inguinal hernia undergoing laparoscopic surgery and to provide a basis for its clinical promotion...This study aimed to explore the application effect of the medical and nursing integration working mode in children with inguinal hernia undergoing laparoscopic surgery and to provide a basis for its clinical promotion.A total of 70 children with inguinal hernia admitted to our hospital from July 2023 to June 2024 and treated with laparoscopic surgery were selected as study subjects and randomly divided into an observation group and a control group,with 35 cases in each.Both groups received routine nursing care,while the observation group additionally adopted the integrated medical and nursing working mode,including systematic health education,psychological interventions,and postoperative follow-up from admission to discharge.The anxiety and depression scores of the two groups before and after surgery,medical compliance index,and incidence of complications during hospitalization were compared.Results showed that the preoperative anxiety scores of the observation and control groups were(14.01±1.07)and(14.62±2.31),respectively,with no statistically significant difference(P>0.05);however,postoperative anxiety scores were significantly lower in the observation group(4.01±0.77)compared to the control group(6.62±0.31)(P<0.05).Similarly,preoperative depression scores were(15.11±1.22)in the observation group and(15.41±2.01)in the control group(P>0.05),but postoperative depression scores were significantly reduced in the observation group(4.24±0.61)compared to the control group(7.12±0.54)(P<0.05).After intervention,the medical compliance behavior index in the observation group was(83.31±5.92),significantly higher than(75.34±6.73)in the control group(P<0.05).Regarding postoperative complications,only 1 case(2.86%)occurred in the observation group,while 8 cases(22.86%)were reported in the control group,showing a statistically significant difference(P<0.05).In conclusion,the medical and nursing integration working mode effectively improves the perioperative psychological state of children,enhances medical compliance,reduces postoperative complications,and is worthy of widespread clinical application.展开更多
AlSi7Mg is an age hardening aluminium alloy that is growing in popularity in additive manufacturing as its good processability makes it well suited to the powder bed fusion process,allowing for its use in the aerospac...AlSi7Mg is an age hardening aluminium alloy that is growing in popularity in additive manufacturing as its good processability makes it well suited to the powder bed fusion process,allowing for its use in the aerospace and automotive industries.The alloy relies on heat treatment to reach its peak strength,with precipitates in the Mg_(2) Si precipitation sequence providing the majority of this strengthening.Powder bed fusion,however,produces components with unique microstructures that differ to those of traditional manufacturing methods such as casting,meaning heat treatments must be carefully tailored for additively manufactured parts.This study therefore investigated the effects of solution treatment temperatures on the final properties and microstructures of T6 treated,additively manufactured AlSi7Mg.Due to the use of a heated build plate,samples aged from the as built and stress relieved conditions exhibited over ageing behaviour,necessitating a solution treatment step to induce useful strength properties.Solution treatments below 500℃were found to provide minimal strengthening upon ageing due to the pres-ence of theπ-Al_(18) Fe_(2)Mg_(7) Si_(10) phase,which reduced the amount of magnesium in solid solution and so reduced the age hardening response of the alloy by restricting the growth of strengthening precipitates.Solution treatments over 500℃,however,demonstrated excellent age hardening due to the replacement of theπ-Al_(18) Fe_(2)Mg_(7) Si_(10) phase with theβ-Al_(9)Fe_(2)Si_(2) phase,increasing the concentration of magnesium in solid solution and therefore improving its age hardening response.A T6 treatment then demonstrated an improvement in yield strength and ductility when compared to the as built state,but a decrease in tensile strength and impact toughness.The variability in the age hardening response of AlSi7Mg suggests that the careful selection of a solution treatment temperature is crucial to property optimisation.展开更多
Background Attention-deficit/hyperactivity disorder(ADHD)is a common neurodevelopmental disorder with behavioural symptoms and grey matter volume(GMV)changes.However,previous studies have not fully elucidated the prog...Background Attention-deficit/hyperactivity disorder(ADHD)is a common neurodevelopmental disorder with behavioural symptoms and grey matter volume(GMV)changes.However,previous studies have not fully elucidated the progressive and causal GMV changes associated with behavioural symptoms in ADHD.Aims This study aimed to explore the causal relationship between GMV alterations and behavioural symptoms in children and adolescents with ADHD using behaviourcausal structural covariance network(BCaSCN)analysis.Methods Structural magnetic resonance imaging(sMRI)data from 135 children and adolescents with ADHD and182 neurotypical controls(NCs)were analysed.ADHD subtypes were identified based on GMV using a clustering algorithm to address the neuroanatomical heterogeneity.To investigate the causal relationships of GMV changes related to behavioural symptoms,sMRI data were sequentially ordered by ADHD index,inattentive index and hyperactive/impulsive index values to generate pseudotime series data.These data were then analysed using region-of-interest-based BCaSCN analysis to explore potential progressive patterns of GMV change.Results Neuroanatomical subtyping revealed two ADHD subtypes with distinct GMV patterns compared with NCs.BCaSCN analysis showed that ADHD subtype 1 was closely associated with inattentiveness,involving prominent nodes in the frontal regions and cerebellum.In contrast,ADHD subtype 2 was more strongly linked to overall disease severity,with the cerebellum and hippocampus as primary hubs.Conclusions ADHD is associated with heterogeneous changes in GMV corresponding to distinct behavioural domains,highlighting the need for subtype-specific diagnostic and therapeutic strategies.展开更多
This study examined the relationship between leader-employee calling congruence on employees’voice behaviour.Participants were 173 leader-employee dyads from the Chinese service industry.They completed online surveys...This study examined the relationship between leader-employee calling congruence on employees’voice behaviour.Participants were 173 leader-employee dyads from the Chinese service industry.They completed online surveys on calling,perceived insider status,and voice behaviour.Results from polynomial regression and response surface analysis showed that employees perceived insider status to be weaker with the low leader-low subordinate calling congruence,and stronger with high leader and high subordinate calling congruence.Employees perceived insider status is stronger in low leader and high subordinate calling incongruence compared with high leader and low subordinate calling incongruence.Perceived insider status plays a mediating role among calling congruence and voice behaviour.This study’sfindings suggest pathways of calling congruence on voice behaviour,which are important for promoting employee voice behaviour and guiding organisational recruitment in the workplace.展开更多
基金funded by UKRI Global Challenges Research Fund through the Economic and Social Research Council(grant reference:ES/T004959/1)with additional partial support from the National Research Foundation of South Africa(grant CSUR230503101533)。
文摘Globally,mealtimes provide key insights into cultural and social values and practices.We examine mealtime environments and eating practices in two different African settings using quantitative observational and questionnaire data.Participating families(N=80)were recruited from two rural locations in Zambia and Kenya.Results following descriptive analysis showed that meals are typically taken as a family in a sociable context,providing opportunities to nurture children’s positive behaviours.In both communities,mothers(71.25%)were most likely to be present and typically prepared meals and provided the food.We observed a few distractions being used during mealtimes,and children finished their food with little to no conflict.Plate sharing varied across the two sites and was more common in Zambia,where we also observed more traditional practices such as eating with hands(as opposed to cutlery)and sitting on mats on the ground(as opposed to seated on chairs or sofas).Overall,our findings suggest more similarities in the cultural and social values across the two African contexts despite slight differences in mealtime practices.In particular,positive mealtime behaviours(little food refusal,lack of conflict)were common across all contexts,regardless of the extent to which traditional practices(such as plate-sharing and sitting on the floor)were used.Findings align with Family Systems theory,which states that the family is understood best by conceptualizing it as a complex,dynamic,and changing collection of parts,subsystems,and family members.
基金supported by the Tianjin Municipal Natural Science Foundation(No.23JCYBJC00040)the National Nat-ural Science Foundation of China(No.52175369)the Tian-jin Research Innovation Project for Postgraduate Students(No.2022SKY134).
文摘To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.
文摘The functionally graded materials(FGMs)are obtained by various processes.Although a few FGMs are obtained naturally,such as oyster,pearl,and bamboo,additive manufacturing(AM),known as 3D printing,is a net-shaped manufacturing process employed to manufacture complex 3D objects without tools,molds,assembly,and joining.Currently,commercial AM techniques mostly use homogeneous composition with simplified geometric descriptions,employing a single material across the entire component to achieve functional graded additive manufacturing(FGAM),in contrast to multi-material FGAM with heterogeneous structures.FGMs are widely used in various fields due to their mechanical property advantages.Because FGM plays a significant role in the industrial production,the characteristics and mechanical behaviour of FGMs prepared by AM were reviewed.In this review,the research on FGMs and AM over the past 30 years was reviewed,suggesting that future researchers should focus on the application of artificial intelligence and machine learning technologies in industry to optimize the process parameters of different gradient systems.
文摘This study aimed to explore the application effect of the medical and nursing integration working mode in children with inguinal hernia undergoing laparoscopic surgery and to provide a basis for its clinical promotion.A total of 70 children with inguinal hernia admitted to our hospital from July 2023 to June 2024 and treated with laparoscopic surgery were selected as study subjects and randomly divided into an observation group and a control group,with 35 cases in each.Both groups received routine nursing care,while the observation group additionally adopted the integrated medical and nursing working mode,including systematic health education,psychological interventions,and postoperative follow-up from admission to discharge.The anxiety and depression scores of the two groups before and after surgery,medical compliance index,and incidence of complications during hospitalization were compared.Results showed that the preoperative anxiety scores of the observation and control groups were(14.01±1.07)and(14.62±2.31),respectively,with no statistically significant difference(P>0.05);however,postoperative anxiety scores were significantly lower in the observation group(4.01±0.77)compared to the control group(6.62±0.31)(P<0.05).Similarly,preoperative depression scores were(15.11±1.22)in the observation group and(15.41±2.01)in the control group(P>0.05),but postoperative depression scores were significantly reduced in the observation group(4.24±0.61)compared to the control group(7.12±0.54)(P<0.05).After intervention,the medical compliance behavior index in the observation group was(83.31±5.92),significantly higher than(75.34±6.73)in the control group(P<0.05).Regarding postoperative complications,only 1 case(2.86%)occurred in the observation group,while 8 cases(22.86%)were reported in the control group,showing a statistically significant difference(P<0.05).In conclusion,the medical and nursing integration working mode effectively improves the perioperative psychological state of children,enhances medical compliance,reduces postoperative complications,and is worthy of widespread clinical application.
文摘AlSi7Mg is an age hardening aluminium alloy that is growing in popularity in additive manufacturing as its good processability makes it well suited to the powder bed fusion process,allowing for its use in the aerospace and automotive industries.The alloy relies on heat treatment to reach its peak strength,with precipitates in the Mg_(2) Si precipitation sequence providing the majority of this strengthening.Powder bed fusion,however,produces components with unique microstructures that differ to those of traditional manufacturing methods such as casting,meaning heat treatments must be carefully tailored for additively manufactured parts.This study therefore investigated the effects of solution treatment temperatures on the final properties and microstructures of T6 treated,additively manufactured AlSi7Mg.Due to the use of a heated build plate,samples aged from the as built and stress relieved conditions exhibited over ageing behaviour,necessitating a solution treatment step to induce useful strength properties.Solution treatments below 500℃were found to provide minimal strengthening upon ageing due to the pres-ence of theπ-Al_(18) Fe_(2)Mg_(7) Si_(10) phase,which reduced the amount of magnesium in solid solution and so reduced the age hardening response of the alloy by restricting the growth of strengthening precipitates.Solution treatments over 500℃,however,demonstrated excellent age hardening due to the replacement of theπ-Al_(18) Fe_(2)Mg_(7) Si_(10) phase with theβ-Al_(9)Fe_(2)Si_(2) phase,increasing the concentration of magnesium in solid solution and therefore improving its age hardening response.A T6 treatment then demonstrated an improvement in yield strength and ductility when compared to the as built state,but a decrease in tensile strength and impact toughness.The variability in the age hardening response of AlSi7Mg suggests that the careful selection of a solution treatment temperature is crucial to property optimisation.
基金funded by the Department of Science and Technology of Shandong ProvinceNatural Science Foundation of Shandong Province(ZR2023QH109)Taishan Scholars Program of Shandong Province(TS201712065)。
文摘Background Attention-deficit/hyperactivity disorder(ADHD)is a common neurodevelopmental disorder with behavioural symptoms and grey matter volume(GMV)changes.However,previous studies have not fully elucidated the progressive and causal GMV changes associated with behavioural symptoms in ADHD.Aims This study aimed to explore the causal relationship between GMV alterations and behavioural symptoms in children and adolescents with ADHD using behaviourcausal structural covariance network(BCaSCN)analysis.Methods Structural magnetic resonance imaging(sMRI)data from 135 children and adolescents with ADHD and182 neurotypical controls(NCs)were analysed.ADHD subtypes were identified based on GMV using a clustering algorithm to address the neuroanatomical heterogeneity.To investigate the causal relationships of GMV changes related to behavioural symptoms,sMRI data were sequentially ordered by ADHD index,inattentive index and hyperactive/impulsive index values to generate pseudotime series data.These data were then analysed using region-of-interest-based BCaSCN analysis to explore potential progressive patterns of GMV change.Results Neuroanatomical subtyping revealed two ADHD subtypes with distinct GMV patterns compared with NCs.BCaSCN analysis showed that ADHD subtype 1 was closely associated with inattentiveness,involving prominent nodes in the frontal regions and cerebellum.In contrast,ADHD subtype 2 was more strongly linked to overall disease severity,with the cerebellum and hippocampus as primary hubs.Conclusions ADHD is associated with heterogeneous changes in GMV corresponding to distinct behavioural domains,highlighting the need for subtype-specific diagnostic and therapeutic strategies.
基金supported by the Major Research Project of Philosophy and Social Sciences in Universities of Henan Province(2025-JCZD-10)the Natural Science Foundation of Henan Province(242300421311).
文摘This study examined the relationship between leader-employee calling congruence on employees’voice behaviour.Participants were 173 leader-employee dyads from the Chinese service industry.They completed online surveys on calling,perceived insider status,and voice behaviour.Results from polynomial regression and response surface analysis showed that employees perceived insider status to be weaker with the low leader-low subordinate calling congruence,and stronger with high leader and high subordinate calling congruence.Employees perceived insider status is stronger in low leader and high subordinate calling incongruence compared with high leader and low subordinate calling incongruence.Perceived insider status plays a mediating role among calling congruence and voice behaviour.This study’sfindings suggest pathways of calling congruence on voice behaviour,which are important for promoting employee voice behaviour and guiding organisational recruitment in the workplace.
