A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on H fields. The cross-coupling terms are neglected in the first ...A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on H fields. The cross-coupling terms are neglected in the first sub-step, but evaluated and doubly used in the second sub-step. The order of two sub-steps is reversed for each transverse magnetic field component so that the cross-coupling terms are always expressed in implicit form, thus the calculation is very efficient and stable. Moreover, an improved six-point finite-difference scheme with high accuracy independent of specific structures of waveguide is also constructed to approximate the cross-coupling terms along the transverse directions. The imaginary-distance procedure is used to assess the validity and utility of the present method. The field patterns and the normalized propagation constants of the fundamental mode for a buried rectangular waveguide and a rib waveguide are presented. Solutions are in excellent agreement with the benchmark results from the modal transverse resonance method.展开更多
A new numerical technique based on the wavelet derivative operator is presented as an alternative to BPM to study the integrated optical waveguide. The wavelet derivative operator is used instead of FFT/IFFT or finite...A new numerical technique based on the wavelet derivative operator is presented as an alternative to BPM to study the integrated optical waveguide. The wavelet derivative operator is used instead of FFT/IFFT or finite difference to calculate the derivatives of the transverse variable in the Helmholtz equation. Results of numerically simulating the injected field at z =0 are exhibited with Gaussian distribution in transverse direction propagating through the two dimensional waveguides (with linear and/or nonlinear refractive index) , which are similar to those in the related publications. Consequently it is efficient and needs not absorbing boundary by introducing the interpolation operator during calculating the wavelet derivative operator. The iterative process needs fewer steps to be stable. Also, when the light wave meets the changes of mediums, the wavelet derivative operator has the adaptive property to adjust those changes at the boundaries.展开更多
Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extens...Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extensive attention due to their advantages of small size,high multiplexing efficiency,convenient mass production,and low cost.An RGB beam combiner based on directional couplers is designed,with a core-cladding relative refractive index difference of 0.75%.The RGB beam combiner is optimized from the perspective of parameter optimization.Using the beam propagation method(BPM),the relationship between the performance of the RGB beam combiner and individual parameters is studied,achieving preliminary optimization of the device’s performance.The key parameters of the RGB beam combiner are optimized using the entropy weight-technique for order preference by similarity to an ideal solution TOPSIS method,establishing the optimal parameter scheme and further improving the device’s performance indicators.The results show that after optimization,the multiplexing efficiencies for red,green,and blue lights,as well as the average multiplexing efficiency,reached 99.17%,99.76%,96.63%and 98.52%,respectively.The size of the RGB beam combiner is 4.768 mm×0.062 mm.展开更多
A novel three-dimensional beam propagation method (BPM) based on the variable transformed Galerkin's method is introduced for simulating optical field propagation in three-dimensional dielectric structures. The in...A novel three-dimensional beam propagation method (BPM) based on the variable transformed Galerkin's method is introduced for simulating optical field propagation in three-dimensional dielectric structures. The infinite Cartesian x-y plane is mapped into a unit square by a tangent-type function transformation. Consequently, the infinite region problem is converted into the finite region problem. Thus, the boundary truncation is eliminated and the calculation accuracy is promoted. The three-dimensional BPM basic equation is reduced to a set of first-order ordinary differential equations through sinusoidal basis function, which fits arbitrary cladding optical waveguide, then direct solution of the resulting equations by means of the Runge-Kutta method. In addition, the calculation is efficient due to the small matrix derived from the present technique. Both z-invariant and z-variant examples are considered to test both the accuracy and utility of this approach.展开更多
A modified alternating direction implicit approach is proposed to discretize the three-dimensional full-vectorial beam propagation method （3D-FV-BPM） formulation along the longitudinal direction. The cross-coupling ...A modified alternating direction implicit approach is proposed to discretize the three-dimensional full-vectorial beam propagation method （3D-FV-BPM） formulation along the longitudinal direction. The cross-coupling terms （CCTs） are neglected at the first substep, and then double used at the second substep. The order of two substeps is reversed for each transverse electric field component so that the CCTs are always expressed in an implicit form, thus the calculation is efficient and stable. Based on the multinomial interpolation, a universal finite difference scheme with a high accuracy is developed to approximate the 3D-FV-BPM formulation along the transverse directions, in which the discontinuities of the normal components of the electric field across the abrupt dielectric interfaces are taken into account and can be applied to both uniform and non-uniform grids. The corresponding imaginary-distance procedure is first applied to a buried rectangular and a GaAs-based deeply-etched rib waveguide. The field patterns and the normalized propagation constants of the fundamental and the first order modes are presented and the hybrid nature of the full-vectorial guided-modes is demonstrated, which shows the validity and utility of the present approach. Then the modal characteristics of the deeply- and shallow-etched rib waveguides based on the InGaAsp/InGaAsP strained multiple quantum wells in InP substrate are investigated in detail. The results are necessary for modeling and the design of the planar lightwave circuits or photonic integrated circuits based on these waveguides.展开更多
This paper presents a systematic method to derive Beam Propagation Models for optical waveguides.The technique is based on the use of the symbolic calculus rules for pseudodifferential operators.The cases of straight ...This paper presents a systematic method to derive Beam Propagation Models for optical waveguides.The technique is based on the use of the symbolic calculus rules for pseudodifferential operators.The cases of straight and bent optical waveguides are successively considered.展开更多
A modified wide-angle beam propagation based on the Douglas operators is presented.The truncation error in the modified wide-angle beam propagation is reduced to o (Δ x ) 4 in the transverse direction nearly wi...A modified wide-angle beam propagation based on the Douglas operators is presented.The truncation error in the modified wide-angle beam propagation is reduced to o (Δ x ) 4 in the transverse direction nearly without any increase of the computation time,whereas the error in the ordinary wide-angle beam propagation method is typically o (Δ x ) 2.With trivial programming changes,the accuracy is higher,especially in wide-angle propagation.展开更多
In this paper, a split step ABCD matrix method is suggested to investigate Gaussian beam propagation in a Kerr type metamaterial medium. This method is based on dividing the medium interval into subsequent steps.Meanw...In this paper, a split step ABCD matrix method is suggested to investigate Gaussian beam propagation in a Kerr type metamaterial medium. This method is based on dividing the medium interval into subsequent steps.Meanwhile, Gaussian beam profile in every step is obtained by finding the ABCD matrix of that particular step, and is used to find the ABCD matrix of the next step. Results of the suggested matrix method have been compared with the results of numerical split-step Fourier method for a Kerr medium, which indicates a good agreement. Then, we use the ABCD matrix to investigate Gaussian beams propagation in a Kerr type metamaterial, which is also in agreement with pervious results by other methods.展开更多
Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analyse...Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.展开更多
In order to reduce transmission loss of the optical waveguide in Mach-Zehnder (M-Z) electro-optical (EO) polymer modulator,the basic iterative formula of semi-vector finite-difference beam propagation method (FD-BPM) ...In order to reduce transmission loss of the optical waveguide in Mach-Zehnder (M-Z) electro-optical (EO) polymer modulator,the basic iterative formula of semi-vector finite-difference beam propagation method (FD-BPM) is obtained from the scalar wave equation. The transition waveguide is combined with S-type bend branch waveguide for the M-Z EO modulator in the branch waveguide. The effects of structure parameters such as ridge width,length of the branch waveguide and interferometer spacing on the transmission loss are systematically studied by using the semi-vector FD-BPM method. The structure is optimized as an S-sine bend branch waveguide,with rib width w=7μm,length of branch waveguide L=1200μm and interferometer spacing G=22 μm. The results show that the optimized structure can reduce transmission loss to 0.083 dB,which have a certain reference value to the design of optical waveguide in M-Z polymer modulator.展开更多
With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in an...With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in anti- resonance guiding photonic crystal fibres （ARGPCFs） are sufficiently analysed. An ARGPCF operating in the near- infrared wavelength is shown. The influences of the high index cylinders, glass interstitial apexes and silica structure on the characteristics of band-gaps and modes are deeply investigated. The equivalent planar waveguide theory is used for analysing such an ARGPCF filled by the isotropic materials, and the resonance and the anti-resonance characteristics r：~n h~ w~｜] r^r~dlrtpd展开更多
This paper presents a novel scheme to monolithically integrate an evanescently-coupled uni-travelling carrier photodiode with a planar short multimode waveguide structure and a large optical cavity electroabsorption m...This paper presents a novel scheme to monolithically integrate an evanescently-coupled uni-travelling carrier photodiode with a planar short multimode waveguide structure and a large optical cavity electroabsorption modulator based on a multimode waveguide structure. By simulation, both electroabsorption modulator and photodiode show excellent optical performances. The device can be fabricated with conventional photolithography, reactive ion etching, and chemical wet etching.展开更多
This paper studies analytically and numerically the dynamics of two-dimensional elliptical Gaussian solitons in a ＂double-self-focusing＂ synthetic nonlocal media featuring elliptical and circular Gaussian response w...This paper studies analytically and numerically the dynamics of two-dimensional elliptical Gaussian solitons in a ＂double-self-focusing＂ synthetic nonlocal media featuring elliptical and circular Gaussian response with different degrees of nonlocality. Based on the variational approach, it obtains the approximately analytical solution of such Gaussian elliptical solitons. It also computes the stability of the solitons by numerical simulations.展开更多
A new polarization rotator based on the silica photonic crystal fiber is proposed. The proposed polarization rotator photonic crystal fiber （PR-PCF） possesses a triangle jigsaw-shape core region. The full-vector fin...A new polarization rotator based on the silica photonic crystal fiber is proposed. The proposed polarization rotator photonic crystal fiber （PR-PCF） possesses a triangle jigsaw-shape core region. The full-vector finite-element method is used to analyze the phenomenon of polarization conversion between the quasi-TE and quasi-TM modes. Numerical simulations show that the wavelengths of 1.31 μm and 1.55 μm are converted with a nearly 100% polarization conversion ratio with their matched coupling length and has a relatively strong realistic fabrication tolerance - 100 nm on the y axis and 50 nm on the x axis. The full vectorial finite difference beam propagation method is used to confirm the performance of the proposed PR-PCF.展开更多
The effect of interstitial air holes on Bragg gratings in photonic crystal fibre （PCF） with a Ge-doped core is numerically investigated by using the beam propagation method （BPM）. It is shown that the interstitial...The effect of interstitial air holes on Bragg gratings in photonic crystal fibre （PCF） with a Ge-doped core is numerically investigated by using the beam propagation method （BPM）. It is shown that the interstitial air holes （IAHs） can make Bragg resonance wavelength λB shift a little towards short wavelengths and increase λB -λ1 （the wavelength spacing between the main peak with Bragg resonance wavelength λB and the first side peak with wavelength λ1） and the coupling coefficient κ of Bragg resonance. Moreover, when the ratio of air hole diameter （d） to pitch （∧）, d/∧, is small, IAHs can suppress the cladding mode resonance. When d/∧ is large, IAHs increase the number of mode that could strongly interact with the fundamental mode. By comparing the transmission spectral characteristics of PCF-based fibre Bragg grating （FBG） with IAHs with those without IAHs at the same air-filling fraction, it is clarified that the change of transmission spectral characteristics of PCF-based FBG with IAHs is not due to a simple change in air-filling fraction. It is also closely related to the distribution of interstitial air holes.展开更多
We propose a novel optical polarizer based on an asymmetric dual-core photonic crystal fiber(PCF) with triangular lattice air-holes.The fiber is designed as that the effective indices of modes in the two cores are mat...We propose a novel optical polarizer based on an asymmetric dual-core photonic crystal fiber(PCF) with triangular lattice air-holes.The fiber is designed as that the effective indices of modes in the two cores are matched at one polarized state but mismatched at another polarized state.As a result,one of the polarization states is coupled to the other core and transferred into a high-order mode.The transmission properties of the polarizer are investigated by the semi-vectorial beam propagation method(SV-BPM).Numerical results demonstrate that a device length of 11.3 mm shows extinction ratio as low as-20 dB with bandwidth as great as 80 nm ranging from 1.51 mm to 1.59 mm.展开更多
Utilizing the tool of beam propagation method (BPM) to calculate the zeroth order diffraction beam intensity, we find SVHG displays notched diffraction response as a function of the readout wavelength. Using the metho...Utilizing the tool of beam propagation method (BPM) to calculate the zeroth order diffraction beam intensity, we find SVHG displays notched diffraction response as a function of the readout wavelength. Using the method of SA and considering the variance of refractive index as the readout wavelength changes, a practiced notch filter can be designed and the period of the filter is discussed.展开更多
A new evanescently-coupled uni-traveling-carrier photodiode （EC-UTC PD） based on a multimode diluted waveguide （MDW） structure is fabricated, analysed and characterized. Optical and electrical characteristics of t...A new evanescently-coupled uni-traveling-carrier photodiode （EC-UTC PD） based on a multimode diluted waveguide （MDW） structure is fabricated, analysed and characterized. Optical and electrical characteristics of the device are investigated. The excellent characteristics are demonstrated such as a responsivity of 0.36 A/W, a bandwidth of 11.5 GHz and a small-signal 1-dB compression current greater than 18 mA at 10 GHz. The saturation current is significantly improved compared with those of similar evanescently-coupled pin photodiodes. The radio frequency （RF） bandwidth can be further improved by eliminating RF losses induced by the cables, the probe and the bias tee between the photodiode and the spectrum analyzer.展开更多
The muhimode interference （MMI） couplers, which operate at 1. 55 microns in deep rib InGaAsP/InP waveguide with large lateral confinement and tunable power splitting ratios, are of high interest in integrated optics...The muhimode interference （MMI） couplers, which operate at 1. 55 microns in deep rib InGaAsP/InP waveguide with large lateral confinement and tunable power splitting ratios, are of high interest in integrated optics. The gold contacts are applied on the top of waveguides where tuning is desired and the plasma effect will lead to negative refractive index change. The three-dimensional （3D） finite difference beam propagation method（FD-BPM） is used to model the tunable MMI couplers. The length of a 2 × 2 overlap-MMI is determined by FD-BPM, so the longitudinal position of tuning spots is obtained. The position of gold contacts with two types, the edge-pads or center-pad, are also determined. In our design, the length of MMI is 180 microns. If the width of pads is 50 microns and the refractive index is tuned from 0 to -0. 027, the power ratio is tuned from 50 ： 50 to the maximum 88.5 ： 11.4. For deep rib structure, the effective index（EI） method can not be used to simplify the 3D waveguide to plane waveguide because of its lower precision, and so the direct 3D FD-BPM simulation is necessary for the design of 3D MMI couplers.展开更多
A new version of the scalar transverse electric(TE) wave equation in the bent waveguide is introduced. Then, TE polarized field in curved single-mode waveguides is analyzed by using the finite-difference beam propagat...A new version of the scalar transverse electric(TE) wave equation in the bent waveguide is introduced. Then, TE polarized field in curved single-mode waveguides is analyzed by using the finite-difference beam propagation method(FD-BPM). The bending loss in bent waveguides is gotten for the optical fields obtained from BPM and comparisons are made among losses of the waveguides with various curvature radiuses, refractive index differences and cross sections. Based on the results, the design of spiral bent waveguide configuration is proposed as follows: refractive index difference being of 0.007, both width and thickness of waveguides being of 6 μm, the curvature radius in the spiral centre being of 4 mm, and the bending loss coefficient of the designed spiral bent waveguide being of 0.302 3 dB/cm.展开更多
文摘A modified alternating direction implicit algorithm is proposed to solve the full-vectorial finite-difference beam propagation method formulation based on H fields. The cross-coupling terms are neglected in the first sub-step, but evaluated and doubly used in the second sub-step. The order of two sub-steps is reversed for each transverse magnetic field component so that the cross-coupling terms are always expressed in implicit form, thus the calculation is very efficient and stable. Moreover, an improved six-point finite-difference scheme with high accuracy independent of specific structures of waveguide is also constructed to approximate the cross-coupling terms along the transverse directions. The imaginary-distance procedure is used to assess the validity and utility of the present method. The field patterns and the normalized propagation constants of the fundamental mode for a buried rectangular waveguide and a rib waveguide are presented. Solutions are in excellent agreement with the benchmark results from the modal transverse resonance method.
文摘A new numerical technique based on the wavelet derivative operator is presented as an alternative to BPM to study the integrated optical waveguide. The wavelet derivative operator is used instead of FFT/IFFT or finite difference to calculate the derivatives of the transverse variable in the Helmholtz equation. Results of numerically simulating the injected field at z =0 are exhibited with Gaussian distribution in transverse direction propagating through the two dimensional waveguides (with linear and/or nonlinear refractive index) , which are similar to those in the related publications. Consequently it is efficient and needs not absorbing boundary by introducing the interpolation operator during calculating the wavelet derivative operator. The iterative process needs fewer steps to be stable. Also, when the light wave meets the changes of mediums, the wavelet derivative operator has the adaptive property to adjust those changes at the boundaries.
基金Project(52175445)supported by the National Natural Science Foundation of ChinaProject(2022JJ30743)supported by the Natural Science Foundation of Hunan Province,China+1 种基金Project(2023GK2024)supported by the Key Research and Development Program of Hunan Province,ChinaProject(2023ZZTS0391)supported by the Fundamental Research Funds for the Central Universities of China。
文摘Red-green-blue(RGB)beam combiners are widely used in scenarios such as augmented reality/virtual reality(AR/VR),laser projection,biochemical detection,and other fields.Optical waveguide combiners have attracted extensive attention due to their advantages of small size,high multiplexing efficiency,convenient mass production,and low cost.An RGB beam combiner based on directional couplers is designed,with a core-cladding relative refractive index difference of 0.75%.The RGB beam combiner is optimized from the perspective of parameter optimization.Using the beam propagation method(BPM),the relationship between the performance of the RGB beam combiner and individual parameters is studied,achieving preliminary optimization of the device’s performance.The key parameters of the RGB beam combiner are optimized using the entropy weight-technique for order preference by similarity to an ideal solution TOPSIS method,establishing the optimal parameter scheme and further improving the device’s performance indicators.The results show that after optimization,the multiplexing efficiencies for red,green,and blue lights,as well as the average multiplexing efficiency,reached 99.17%,99.76%,96.63%and 98.52%,respectively.The size of the RGB beam combiner is 4.768 mm×0.062 mm.
文摘A novel three-dimensional beam propagation method (BPM) based on the variable transformed Galerkin's method is introduced for simulating optical field propagation in three-dimensional dielectric structures. The infinite Cartesian x-y plane is mapped into a unit square by a tangent-type function transformation. Consequently, the infinite region problem is converted into the finite region problem. Thus, the boundary truncation is eliminated and the calculation accuracy is promoted. The three-dimensional BPM basic equation is reduced to a set of first-order ordinary differential equations through sinusoidal basis function, which fits arbitrary cladding optical waveguide, then direct solution of the resulting equations by means of the Runge-Kutta method. In addition, the calculation is efficient due to the small matrix derived from the present technique. Both z-invariant and z-variant examples are considered to test both the accuracy and utility of this approach.
文摘A modified alternating direction implicit approach is proposed to discretize the three-dimensional full-vectorial beam propagation method （3D-FV-BPM） formulation along the longitudinal direction. The cross-coupling terms （CCTs） are neglected at the first substep, and then double used at the second substep. The order of two substeps is reversed for each transverse electric field component so that the CCTs are always expressed in an implicit form, thus the calculation is efficient and stable. Based on the multinomial interpolation, a universal finite difference scheme with a high accuracy is developed to approximate the 3D-FV-BPM formulation along the transverse directions, in which the discontinuities of the normal components of the electric field across the abrupt dielectric interfaces are taken into account and can be applied to both uniform and non-uniform grids. The corresponding imaginary-distance procedure is first applied to a buried rectangular and a GaAs-based deeply-etched rib waveguide. The field patterns and the normalized propagation constants of the fundamental and the first order modes are presented and the hybrid nature of the full-vectorial guided-modes is demonstrated, which shows the validity and utility of the present approach. Then the modal characteristics of the deeply- and shallow-etched rib waveguides based on the InGaAsp/InGaAsP strained multiple quantum wells in InP substrate are investigated in detail. The results are necessary for modeling and the design of the planar lightwave circuits or photonic integrated circuits based on these waveguides.
文摘This paper presents a systematic method to derive Beam Propagation Models for optical waveguides.The technique is based on the use of the symbolic calculus rules for pseudodifferential operators.The cases of straight and bent optical waveguides are successively considered.
文摘A modified wide-angle beam propagation based on the Douglas operators is presented.The truncation error in the modified wide-angle beam propagation is reduced to o (Δ x ) 4 in the transverse direction nearly without any increase of the computation time,whereas the error in the ordinary wide-angle beam propagation method is typically o (Δ x ) 2.With trivial programming changes,the accuracy is higher,especially in wide-angle propagation.
文摘In this paper, a split step ABCD matrix method is suggested to investigate Gaussian beam propagation in a Kerr type metamaterial medium. This method is based on dividing the medium interval into subsequent steps.Meanwhile, Gaussian beam profile in every step is obtained by finding the ABCD matrix of that particular step, and is used to find the ABCD matrix of the next step. Results of the suggested matrix method have been compared with the results of numerical split-step Fourier method for a Kerr medium, which indicates a good agreement. Then, we use the ABCD matrix to investigate Gaussian beams propagation in a Kerr type metamaterial, which is also in agreement with pervious results by other methods.
文摘Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.
基金supported by the National High Technology Research and Development Program of China (No.2009AA03Z413)
文摘In order to reduce transmission loss of the optical waveguide in Mach-Zehnder (M-Z) electro-optical (EO) polymer modulator,the basic iterative formula of semi-vector finite-difference beam propagation method (FD-BPM) is obtained from the scalar wave equation. The transition waveguide is combined with S-type bend branch waveguide for the M-Z EO modulator in the branch waveguide. The effects of structure parameters such as ridge width,length of the branch waveguide and interferometer spacing on the transmission loss are systematically studied by using the semi-vector FD-BPM method. The structure is optimized as an S-sine bend branch waveguide,with rib width w=7μm,length of branch waveguide L=1200μm and interferometer spacing G=22 μm. The results show that the optimized structure can reduce transmission loss to 0.083 dB,which have a certain reference value to the design of optical waveguide in M-Z polymer modulator.
基金partly supported by the National Key Basic Research Special Foundation of China (Grant Nos. 2010CB327605 and 2010CB328300)the National High-Technology Research and Development Program of China (Grant No. 2009AA01Z220)+3 种基金the Key Grant of the Chinese Ministry of Education (Grant No. 109015)the Discipline Co-construction Project of Beijing Municipal Commission of Education,China (Grant No. YB20081001301)the Open Fund of Key Laboratory of Information Photonics and Optical Communications (Beijing University of Posts and Telecommunications),Chinese Ministry of Educationthe Specialized Research Fund for the Doctoral Program of Beijing University of Posts and Telecommunications (Grant No. CX201023)
文摘With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in anti- resonance guiding photonic crystal fibres （ARGPCFs） are sufficiently analysed. An ARGPCF operating in the near- infrared wavelength is shown. The influences of the high index cylinders, glass interstitial apexes and silica structure on the characteristics of band-gaps and modes are deeply investigated. The equivalent planar waveguide theory is used for analysing such an ARGPCF filled by the isotropic materials, and the resonance and the anti-resonance characteristics r：~n h~ w~｜] r^r~dlrtpd
基金supported by the National Natural Science Foundation of China (Grant No 90401025)the National 973 project (Grant No 2006CB604901)
文摘This paper presents a novel scheme to monolithically integrate an evanescently-coupled uni-travelling carrier photodiode with a planar short multimode waveguide structure and a large optical cavity electroabsorption modulator based on a multimode waveguide structure. By simulation, both electroabsorption modulator and photodiode show excellent optical performances. The device can be fabricated with conventional photolithography, reactive ion etching, and chemical wet etching.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60808002)the Shanghai Leading Academic Discipline Program,China (Grant No. S30105)
文摘This paper studies analytically and numerically the dynamics of two-dimensional elliptical Gaussian solitons in a ＂double-self-focusing＂ synthetic nonlocal media featuring elliptical and circular Gaussian response with different degrees of nonlocality. Based on the variational approach, it obtains the approximately analytical solution of such Gaussian elliptical solitons. It also computes the stability of the solitons by numerical simulations.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11274181,10974100,61203204,and 10674075)the Doctoral Scientific Fund Project of the Ministry of Education of China(Grant No.20120031110033)the Tianjin Key Program of Application Foundations and Future Technology Research Project,China(Grant No.10JCZDJC24300)
文摘A new polarization rotator based on the silica photonic crystal fiber is proposed. The proposed polarization rotator photonic crystal fiber （PR-PCF） possesses a triangle jigsaw-shape core region. The full-vector finite-element method is used to analyze the phenomenon of polarization conversion between the quasi-TE and quasi-TM modes. Numerical simulations show that the wavelengths of 1.31 μm and 1.55 μm are converted with a nearly 100% polarization conversion ratio with their matched coupling length and has a relatively strong realistic fabrication tolerance - 100 nm on the y axis and 50 nm on the x axis. The full vectorial finite difference beam propagation method is used to confirm the performance of the proposed PR-PCF.
基金supported by the National Natural Science Foundation of China (Grant No 10874145)the Yanshan University Doctoral Foundation (Grant No B153)
文摘The effect of interstitial air holes on Bragg gratings in photonic crystal fibre （PCF） with a Ge-doped core is numerically investigated by using the beam propagation method （BPM）. It is shown that the interstitial air holes （IAHs） can make Bragg resonance wavelength λB shift a little towards short wavelengths and increase λB -λ1 （the wavelength spacing between the main peak with Bragg resonance wavelength λB and the first side peak with wavelength λ1） and the coupling coefficient κ of Bragg resonance. Moreover, when the ratio of air hole diameter （d） to pitch （∧）, d/∧, is small, IAHs can suppress the cladding mode resonance. When d/∧ is large, IAHs increase the number of mode that could strongly interact with the fundamental mode. By comparing the transmission spectral characteristics of PCF-based fibre Bragg grating （FBG） with IAHs with those without IAHs at the same air-filling fraction, it is clarified that the change of transmission spectral characteristics of PCF-based FBG with IAHs is not due to a simple change in air-filling fraction. It is also closely related to the distribution of interstitial air holes.
基金supported by the National Natural Science Foundation of China (No.10904051)the China Postdoctoral Science Foundation (Nos.20080441070 and 200902505) the Jiangsu Planned Projects for Postdoctoral Research Funds (No.0802018B)
文摘We propose a novel optical polarizer based on an asymmetric dual-core photonic crystal fiber(PCF) with triangular lattice air-holes.The fiber is designed as that the effective indices of modes in the two cores are matched at one polarized state but mismatched at another polarized state.As a result,one of the polarization states is coupled to the other core and transferred into a high-order mode.The transmission properties of the polarizer are investigated by the semi-vectorial beam propagation method(SV-BPM).Numerical results demonstrate that a device length of 11.3 mm shows extinction ratio as low as-20 dB with bandwidth as great as 80 nm ranging from 1.51 mm to 1.59 mm.
基金Supported by the National Natural Science Foundation of China!696 07005)
文摘Utilizing the tool of beam propagation method (BPM) to calculate the zeroth order diffraction beam intensity, we find SVHG displays notched diffraction response as a function of the readout wavelength. Using the method of SA and considering the variance of refractive index as the readout wavelength changes, a practiced notch filter can be designed and the period of the filter is discussed.
基金Project supported by the National High Technology Research and Development of China (Grant Nos 2006AA01Z256,2007AA03Z419 and 2007AA03Z417)the State Key Development Program for Basic Research of China (Grant Nos 2006CB604901 and 2006CB604902)the National Natural Science Foundation of China (Grant Nos 90401025,60736036,60706009 and60777021)
文摘A new evanescently-coupled uni-traveling-carrier photodiode （EC-UTC PD） based on a multimode diluted waveguide （MDW） structure is fabricated, analysed and characterized. Optical and electrical characteristics of the device are investigated. The excellent characteristics are demonstrated such as a responsivity of 0.36 A/W, a bandwidth of 11.5 GHz and a small-signal 1-dB compression current greater than 18 mA at 10 GHz. The saturation current is significantly improved compared with those of similar evanescently-coupled pin photodiodes. The radio frequency （RF） bandwidth can be further improved by eliminating RF losses induced by the cables, the probe and the bias tee between the photodiode and the spectrum analyzer.
文摘The muhimode interference （MMI） couplers, which operate at 1. 55 microns in deep rib InGaAsP/InP waveguide with large lateral confinement and tunable power splitting ratios, are of high interest in integrated optics. The gold contacts are applied on the top of waveguides where tuning is desired and the plasma effect will lead to negative refractive index change. The three-dimensional （3D） finite difference beam propagation method（FD-BPM） is used to model the tunable MMI couplers. The length of a 2 × 2 overlap-MMI is determined by FD-BPM, so the longitudinal position of tuning spots is obtained. The position of gold contacts with two types, the edge-pads or center-pad, are also determined. In our design, the length of MMI is 180 microns. If the width of pads is 50 microns and the refractive index is tuned from 0 to -0. 027, the power ratio is tuned from 50 ： 50 to the maximum 88.5 ： 11.4. For deep rib structure, the effective index（EI） method can not be used to simplify the 3D waveguide to plane waveguide because of its lower precision, and so the direct 3D FD-BPM simulation is necessary for the design of 3D MMI couplers.
文摘A new version of the scalar transverse electric(TE) wave equation in the bent waveguide is introduced. Then, TE polarized field in curved single-mode waveguides is analyzed by using the finite-difference beam propagation method(FD-BPM). The bending loss in bent waveguides is gotten for the optical fields obtained from BPM and comparisons are made among losses of the waveguides with various curvature radiuses, refractive index differences and cross sections. Based on the results, the design of spiral bent waveguide configuration is proposed as follows: refractive index difference being of 0.007, both width and thickness of waveguides being of 6 μm, the curvature radius in the spiral centre being of 4 mm, and the bending loss coefficient of the designed spiral bent waveguide being of 0.302 3 dB/cm.
