Engineering tests can yield inaccurate data due to instrument errors,human factors,and environmental interference,introducing uncertainty in numerical model updating.This study employs the probability-box(p-box)method...Engineering tests can yield inaccurate data due to instrument errors,human factors,and environmental interference,introducing uncertainty in numerical model updating.This study employs the probability-box(p-box)method for representing observational uncertainty and develops a two-step approximate Bayesian computation(ABC)framework using time-series data.Within the ABC framework,Euclidean and Bhattacharyya distances are employed as uncertainty quantification metrics to delineate approximate likelihood functions in the initial and subsequent steps,respectively.A novel variational Bayesian Monte Carlo method is introduced to efficiently apply the ABC framework amidst observational uncertainty,resulting in rapid convergence and accurate parameter estimation with minimal iterations.The efficacy of the proposed updating strategy is validated by its application to a shear frame model excited by seismic wave and an aviation pump force sensor for thermal output analysis.The results affirm the efficiency,robustness,and practical applicability of the proposed method.展开更多
Although Quercus mongolica is a widely distributed,economically and ecologically important deciduous tree in northern China,models to accurately predict stand growth at a regional scale are limited.The physiological p...Although Quercus mongolica is a widely distributed,economically and ecologically important deciduous tree in northern China,models to accurately predict stand growth at a regional scale are limited.The physiological process model(3-PG)has the potential to predict stand growth dynamics under varying site conditions and climate change scenarios.Here,we used field inventory,tree ring sampling,and Bayesian calibration to parameterize a model for Q.mongolica.Stand volume and productivity were then predicted under present conditions and three future climate scenarios(RCP26,RCP45 and RCP85).Our results demonstrated that after Bayesian calibration,the posterior ranges of the sensitivity parameters apha Cx,wSx1000 and pRn accounted for 34%,45%and 65%,respectively,of their prior range.Calibration and validation results revealed a strong correlation between predicted and measured values(R^(2)>0.87,P<0.01),with<20%bias for all growth indicators.Stand volume was projected to increase by 145%and productivity by 80%by the year 2100 under the RCP85 scenario,although these projections may vary across regions.The present study developed a tailored set of 3-PG model parameters for Q.mongolica,based on a comprehensive range of climate conditions,stand structure,and age classes.These parameters offer a scientific basis to accurately predict growth of other monospecific oak or mixed-species stands.展开更多
Assessing the stability of slopes is one of the crucial tasks of geotechnical engineering for assessing and managing risks related to natural hazards,directly affecting safety and sustainable development.This study pr...Assessing the stability of slopes is one of the crucial tasks of geotechnical engineering for assessing and managing risks related to natural hazards,directly affecting safety and sustainable development.This study primarily focuses on developing robust and practical hybrid models to predict the slope stability status of circular failure mode.For this purpose,three robust models were developed using a database including 627 case histories of slope stability status.The models were developed using the random forest(RF),support vector machine(SVM),and extreme gradient boosting(XGB)techniques,employing 5-fold cross validation approach.To enhance the performance of models,this study employs Bayesian optimizer(BO)to fine-tuning their hyperparameters.The results indicate that the performance order of the three developed models is RF-BO>SVM-BO>XGB-BO.Furthermore,comparing the developed models with previous models,it was found that the RF-BO model can effectively determine the slope stability status with outstanding performance.This implies that the RF-BO model could serve as a dependable tool for project managers,assisting in the evaluation of slope stability during both the design and operational phases of projects,despite the inherent challenges in this domain.The results regarding the importance of influencing parameters indicate that cohesion,friction angle,and slope height exert the most significant impact on slope stability status.This suggests that concentrating on these parameters and employing the RF-BO model can effectively mitigate the severity of geohazards in the short-term and contribute to the attainment of long-term sustainable development objectives.展开更多
Despite extensive prevention efforts and research,dengue hemorrhagic fever(DHF)remains a major public health challenge,particularly in tropical regions,with significant social,economic,and health consequences.Statisti...Despite extensive prevention efforts and research,dengue hemorrhagic fever(DHF)remains a major public health challenge,particularly in tropical regions,with significant social,economic,and health consequences.Statistical models are crucial in studying infectious DHF by providing a structured framework to analyze transmission dynamics between humans(hosts)and mosquitoes(vectors).Depending on the disease characteristics,different stochastic compartmental models can be employed.This research applies Bayesian Integrated Nested Laplace Approximation(INLA)to the SIR-SI model for DHF data.The method delivers accurate parameter estimates,improved computational efficiency,and effective integration with early warning systems.The model compared to existing work usingMarkovChainMonteCarlo(MCMC)usingmonthlyDHF data from10 districts inKendari-Indonesia from2020–2023.WhileMCMC requires 10,000 iterations with an 80,000 burn-in,INLA achieves parameter convergence with just 10,000 iterations.The parameter estimation results show that INLA provides a better fit,with the lowest deviance=105.23,compared toMCMC.Risk analysis using INLA highlights dengue case dynamics fromJanuary toMay each year.Kadia and Wua-Wua districts consistently show high case numbers,emphasizing the need for targeted interventions in Kendari City.Early surveillance and control efforts are essential to curb mosquito breeding in these areas starting in January.In contrast,the Puuwatu,Kambu,and Kendari Barat districts are sporadic outbreaks,often linked to cases originating in Kadia andWua-Wua districts.展开更多
This study investigated forest recovery in the Atlantic Rainforest and Rupestrian Grassland of Brazil using the diffusive-logistic growth(DLG)model.This model simulates vegetation growth in the two mountain biomes con...This study investigated forest recovery in the Atlantic Rainforest and Rupestrian Grassland of Brazil using the diffusive-logistic growth(DLG)model.This model simulates vegetation growth in the two mountain biomes considering spatial location,time,and two key parameters:diffusion rate and growth rate.A Bayesian framework is employed to analyze the model's parameters and assess prediction uncertainties.Satellite imagery from 1992 and 2022 was used for model calibration and validation.By solving the DLG model using the finite difference method,we predicted a 6.6%–51.1%increase in vegetation density for the Atlantic Rainforest and a 5.3%–99.9%increase for the Rupestrian Grassland over 30 years,with the latter showing slower recovery but achieving a better model fit(lower RMSE)compared to the Atlantic Rainforest.The Bayesian approach revealed well-defined parameter distributions and lower parameter values for the Rupestrian Grassland,supporting the slower recovery prediction.Importantly,the model achieved good agreement with observed vegetation patterns in unseen validation data for both biomes.While there were minor spatial variations in accuracy,the overall distributions of predicted and observed vegetation density were comparable.Furthermore,this study highlights the importance of considering uncertainty in model predictions.Bayesian inference allowed us to quantify this uncertainty,demonstrating that the model's performance can vary across locations.Our approach provides valuable insights into forest regeneration process uncertainties,enabling comparisons of modeled scenarios at different recovery stages for better decision-making in these critical mountain biomes.展开更多
Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite a...Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.展开更多
Challenges in stratigraphic modeling arise from underground uncertainty.While borehole exploration is reliable,it remains sparse due to economic and site constraints.Electrical resistivity tomography(ERT)as a cost-eff...Challenges in stratigraphic modeling arise from underground uncertainty.While borehole exploration is reliable,it remains sparse due to economic and site constraints.Electrical resistivity tomography(ERT)as a cost-effective geophysical technique can acquire high-density data;however,uncertainty and nonuniqueness inherent in ERT impede its usage for stratigraphy identification.This paper integrates ERT and onsite observations for the first time to propose a novel method for characterizing stratigraphic profiles.The method consists of two steps:(1)ERT for prior knowledge:ERT data are processed by soft clustering using the Gaussian mixture model,followed by probability smoothing to quantify its depthdependent uncertainty;and(2)Observations for calibration:a spatial sequential Bayesian updating(SSBU)algorithm is developed to update the prior knowledge based on likelihoods derived from onsite observations,namely topsoil and boreholes.The effectiveness of the proposed method is validated through its application to a real slope site in Foshan,China.Comparative analysis with advanced borehole-driven methods highlights the superiority of incorporating ERT data in stratigraphic modeling,in terms of prediction accuracy at borehole locations and sensitivity to borehole data.Informed by ERT,reduced sensitivity to boreholes provides a fundamental solution to the longstanding challenge of sparse measurements.The paper further discusses the impact of ERT uncertainty on the proposed model using time-lapse measurements,the impact of model resolution,and applicability in engineering projects.This study,as a breakthrough in stratigraphic modeling,bridges gaps in combining geophysical and geotechnical data to address measurement sparsity and paves the way for more economical geotechnical exploration.展开更多
Background Multibreed genomic prediction(MBGP)is crucial for improving prediction accuracy for breeds with small populations,for which limited data are often available.Recent studies have demonstrated that partitionin...Background Multibreed genomic prediction(MBGP)is crucial for improving prediction accuracy for breeds with small populations,for which limited data are often available.Recent studies have demonstrated that partitioning the genome into nonoverlapping blocks to model heterogeneous genetic(co)variance in multitrait models can achieve higher joint prediction accuracy.However,the block partitioning method,a key factor influencing model performance,has not been extensively explored.Results We introduce mbBayesABLD,a novel Bayesian MBGP model that partitions each chromosome into nonoverlapping blocks on the basis of linkage disequilibrium(LD)patterns.In this model,marker effects within each block are assumed to follow normal distributions with block-specific parameters.We employ simulated data as well as empirical datasets from pigs and beans to assess genomic prediction accuracy across different models using cross-validation.The results demonstrate that mbBayesABLD significantly outperforms conventional MBGP models,such as GBLUP and BayesR.For the meat marbling score trait in pigs,compared with GBLUP,which does not account for heterogeneous genetic(co)variance,mbBayesABLD improves the prediction accuracy for the small-population breed Landrace by 15.6%.Furthermore,our findings indicate that a moderate level of similarity in LD patterns between breeds(with an average correlation of 0.6)is sufficient to improve the prediction accuracy of the target breed.Conclusions This study presents a novel LD block-based approach for multibreed genomic prediction.Our work provides a practical tool for livestock breeding programs and offers new insights into leveraging genetic diversity across breeds for improved genomic prediction.展开更多
Using VAR-DCC-GARCH model,the literature on commodity price was extended by exploring the co-movement between Chinese nonferrous metal prices and global nonferrous metal prices represented by the nonferrous metal pric...Using VAR-DCC-GARCH model,the literature on commodity price was extended by exploring the co-movement between Chinese nonferrous metal prices and global nonferrous metal prices represented by the nonferrous metal prices from London Metal Exchange(LME).The results show that LME nonferrous metals prices still have a greater impact on Chinese nonferrous metals prices.However,the impact of Chinese nonferrous metals prices on LME nonferrous metals prices is still weak except for lead price.The co-movement of nonferrous metal prices between LME and China presents hysteretic nature,and it lasts for 7-8trading days.Furthermore,the co-movement between LME nonferrous metals prices and Chinese nonferrous metals prices has the characteristics of time-varying,and the correlation of lead prices between LME and China is the more stable than all other nonferrous metals prices.展开更多
In order to improve crash occurrence models to account for the influence of various contributing factors, a conditional autoregressive negative binomial （CAR-NB） model is employed to allow for overdispersion （tackl...In order to improve crash occurrence models to account for the influence of various contributing factors, a conditional autoregressive negative binomial （CAR-NB） model is employed to allow for overdispersion （tackled by the NB component）, unobserved heterogeneity and spatial autocorrelation （captured by the CAR process）, using Markov chain Monte Carlo methods and the Gibbs sampler. Statistical tests suggest that the CAR-NB model is preferred over the CAR-Poisson, NB, zero-inflated Poisson, zero-inflated NB models, due to its lower prediction errors and more robust parameter inference. The study results show that crash frequency and fatalities are positively associated with the number of lanes, curve length, annual average daily traffic （AADT） per lane, as well as rainfall. Speed limit and the distances to the nearest hospitals have negative associations with segment-based crash counts but positive associations with fatality counts, presumably as a result of worsened collision impacts at higher speed and time loss during transporting crash victims.展开更多
To improve the accuracy and speed in cycle-accurate power estimation, this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model. By analyzing the power distribution and intern...To improve the accuracy and speed in cycle-accurate power estimation, this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model. By analyzing the power distribution and internal node state, we find the deficiency of only using port information. Then, we define the gate level number computing method and the concept of slice, and propose using slice analysis to distill switching density as coefficients in a special circuit stage and participate in Bayesian inference with port information. Experiments show that this method can reduce the power-per-cycle estimation error by 21.9% and the root mean square error by 25.0% compared with the original model, and maintain a 700 ＋ speedup compared with the existing gate-level power analysis technique.展开更多
In order to classify the minimal hepatic encephalopathy （MHE） patients from healthy controls, the independent component analysis （ICA） is used to generate the default mode network （DMN） from resting-state functi...In order to classify the minimal hepatic encephalopathy （MHE） patients from healthy controls, the independent component analysis （ICA） is used to generate the default mode network （DMN） from resting-state functional magnetic resonance imaging （fMRI）. Then a Bayesian voxel- wised method, graphical-model-based multivariate analysis （GAMMA）, is used to explore the associations between abnormal functional integration within DMN and clinical variable. Without any prior knowledge, five machine learning methods, namely, support vector machines （SVMs）, classification and regression trees （ CART ）, logistic regression, the Bayesian network, and C4.5, are applied to the classification. The functional integration patterns were alternative within DMN, which have the power to predict MHE with an accuracy of 98%. The GAMMA method generating functional integration patterns within DMN can become a simple, objective, and common imaging biomarker for detecting MIIE and can serve as a supplement to the existing diagnostic methods.展开更多
BACKGROUND The factors affecting the prognosis and role of adjuvant therapy in advanced gallbladder carcinoma(GBC)after curative resection remain unclear.AIM To provide a survival prediction model to patients with GBC...BACKGROUND The factors affecting the prognosis and role of adjuvant therapy in advanced gallbladder carcinoma(GBC)after curative resection remain unclear.AIM To provide a survival prediction model to patients with GBC as well as to identify the role of adjuvant therapy.METHODS Patients with curatively resected advanced gallbladder adenocarcinoma(T3 and T4)were selected from the Surveillance,Epidemiology,and End Results database between 2004 and 2015.A survival prediction model based on Bayesian network(BN)was constructed using the tree-augmented na?ve Bayes algorithm,and composite importance measures were applied to rank the influence of factors on survival.The dataset was divided into a training dataset to establish the BN model and a testing dataset to test the model randomly at a ratio of 7:3.The confusion matrix and receiver operating characteristic curve were used to evaluate the model accuracy.RESULTS A total of 818 patients met the inclusion criteria.The median survival time was 9.0 mo.The accuracy of BN model was 69.67%,and the area under the curve value for the testing dataset was 77.72%.Adjuvant radiation,adjuvant chemotherapy(CTx),T stage,scope of regional lymph node surgery,and radiation sequence were ranked as the top five prognostic factors.A survival prediction table was established based on T stage,N stage,adjuvant radiotherapy(XRT),and CTx.The distribution of the survival time(>9.0 mo)was affected by different treatments with the order of adjuvant chemoradiotherapy(cXRT)>adjuvant radiation>adjuvant chemotherapy>surgery alone.For patients with node-positive disease,the larger benefit predicted by the model is adjuvant chemoradiotherapy.The survival analysis showed that there was a significant difference among the different adjuvant therapy groups(log rank,surgery alone vs CTx,P<0.001;surgery alone vs XRT,P=0.014;surgery alone vs cXRT,P<0.001).CONCLUSION The BN-based survival prediction model can be used as a decision-making support tool for advanced GBC patients.Adjuvant chemoradiotherapy is expected to improve the survival significantly for patients with node-positive disease.展开更多
Presented is a multiple model soft sensing method based on Affinity Propagation （AP）, Gaussian process （GP） and Bayesian committee machine （BCM）. AP clustering arithmetic is used to cluster training samples acco...Presented is a multiple model soft sensing method based on Affinity Propagation （AP）, Gaussian process （GP） and Bayesian committee machine （BCM）. AP clustering arithmetic is used to cluster training samples according to their operating points. Then, the sub-models are estimated by Gaussian Process Regression （GPR）. Finally, in order to get a global probabilistic prediction, Bayesian committee mactnne is used to combine the outputs of the sub-estimators. The proposed method has been applied to predict the light naphtha end point in hydrocracker fractionators. Practical applications indicate that it is useful for the online prediction of quality monitoring in chemical processes.展开更多
Bayesian regularized BP neural network（BRBPNN） technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of t...Bayesian regularized BP neural network（BRBPNN） technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of the network were obtained. After the selection of input variables using stepwise/multiple linear regression method in SPSS i1.0 software, the BRBPNN model was established between chlorophyll-α and environmental parameters, biological parameters. The achieved optimal network structure was 3-11-1 with the correlation coefficients and the mean square errors for the training set and the test set as 0.999 and 0.000？8426, 0.981 and 0.0216 respectively. The sum of square weights between each input neuron and the hidden layer of optimal BRBPNN models of different structures indicated that the effect of individual input parameter on chlorophyll- α declined in the order of alga amount 〉 secchi disc depth（SD） 〉 electrical conductivity （EC）. Additionally, it also demonstrated that the contributions of these three factors were the maximal for the change of chlorophyll-α concentration, total phosphorus（TP） and total nitrogen（TN） were the minimal. All the results showed that BRBPNN model was capable of automated regularization parameter selection and thus it may ensure the excellent generation ability and robustness. Thus, this study laid the foundation for the application of BRBPNN model in the analysis of aquatic ecological data（chlorophyll-α prediction） and the explanation about the effective eutrophication treatment measures for Nanzui water area in Dongting Lake.展开更多
The Reynolds Averaged Navier-Stokes(RANS) models are still the workhorse in current engineering applications due to its high efficiency and robustness. However, the closure coefficients of RANS turbulence models are d...The Reynolds Averaged Navier-Stokes(RANS) models are still the workhorse in current engineering applications due to its high efficiency and robustness. However, the closure coefficients of RANS turbulence models are determined by model builders according to some simple fundamental flows, and the suggested values may not be applicable to complex flows, especially supersonic jet interaction flow. In this work, the Bayesian method is employed to recalibrate the closure coefficients of Spalart-Allmaras(SA) turbulence model to improve its performance in supersonic jet interaction problem and quantify the uncertainty of wall pressure and separation length. The embedded model error approach is applied to the Bayesian uncertainty analysis. Firstly, the total Sobol index is calculated by non-intrusive polynomial chaos method to represent the sensitivity of wall pressure and separation length to model parameters. Then, the pressure data and the separation length are respectively served as calibration data to get the posterior uncertainty of model parameters and Quantities of Interests(Qo Is). The results show that the relative error of the wall pressure predicted by the SA turbulence model can be reduced from 14.99% to 2.95% through effective Bayesian parameter estimation. Besides, the calibration effects of four likelihood functions are systematically evaluated. The posterior uncertainties of wall pressure and separation length estimated by different likelihood functions are significantly discrepant, and the Maximum a Posteriori(MAP) values of parameters inferred by all functions show better performance than the nominal values. Finally, the closure coefficients are also estimated at different jet total pressures. The similar posterior distributions of model parameters are obtained in different cases, and the MAP values of parameters calibrated in one case are also applicable to other cases.展开更多
When modeling a stealth aircraft with low RCS（Radar Cross Section）, conventional parameter estimation methods may cause a deviation from the actual distribution, owing to the fact that the characteristic parameters ...When modeling a stealth aircraft with low RCS（Radar Cross Section）, conventional parameter estimation methods may cause a deviation from the actual distribution, owing to the fact that the characteristic parameters are estimated via directly calculating the statistics of RCS. The Bayesian–Markov Chain Monte Carlo（Bayesian-MCMC） method is introduced herein to estimate the parameters so as to improve the fitting accuracies of fluctuation models. The parameter estimations of the lognormal and the Legendre polynomial models are reformulated in the Bayesian framework. The MCMC algorithm is then adopted to calculate the parameter estimates. Numerical results show that the distribution curves obtained by the proposed method exhibit improved consistence with the actual ones, compared with those fitted by the conventional method. The fitting accuracy could be improved by no less than 25% for both fluctuation models, which implies that the Bayesian-MCMC method might be a good candidate among the optimal parameter estimation methods for stealth aircraft RCS models.展开更多
A degradation model with a random failure threshold is presented for the assessment of reliability by the Bayesian approach. This model is different from others in that the degradation process is proceeding under pre-...A degradation model with a random failure threshold is presented for the assessment of reliability by the Bayesian approach. This model is different from others in that the degradation process is proceeding under pre-specified periodical calibrations. And here a random threshold distribution instead of a constant threshold which is difficult to determine in practice is used. The system reliability is defined as the probability that the degradation signals do not exceed the random threshold. Based on the posterior distribution estimates of degradation performance, two models for Bayesian reliability assessments are presented in terms of the degradation performance and the distribution of random failure threshold. The methods proposed in this paper are very useful and practical for multi-stage system with uncertain failure threshold. This study perfects the degradation modeling approaches and plays an important role in the remaining useful life estimation and maintenance decision making.展开更多
The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also...The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also makes thermal error prediction difficult. To address this issue, a novel prediction method for machine tool thermal error based on Bayesian networks (BNs) was presented. The method described causal relationships of factors inducing thermal deformation by graph theory and estimated the thermal error by Bayesian statistical techniques. Due to the effective combination of domain knowledge and sampled data, the BN method could adapt to the change of running state of machine, and obtain satisfactory prediction accuracy. Ex- periments on spindle thermal deformation were conducted to evaluate the modeling performance. Experimental results indicate that the BN method performs far better than the least squares (LS) analysis in terms of modeling estimation accuracy.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.U23B20105).
文摘Engineering tests can yield inaccurate data due to instrument errors,human factors,and environmental interference,introducing uncertainty in numerical model updating.This study employs the probability-box(p-box)method for representing observational uncertainty and develops a two-step approximate Bayesian computation(ABC)framework using time-series data.Within the ABC framework,Euclidean and Bhattacharyya distances are employed as uncertainty quantification metrics to delineate approximate likelihood functions in the initial and subsequent steps,respectively.A novel variational Bayesian Monte Carlo method is introduced to efficiently apply the ABC framework amidst observational uncertainty,resulting in rapid convergence and accurate parameter estimation with minimal iterations.The efficacy of the proposed updating strategy is validated by its application to a shear frame model excited by seismic wave and an aviation pump force sensor for thermal output analysis.The results affirm the efficiency,robustness,and practical applicability of the proposed method.
基金supported by the Fundamental Research Funds for the Central Non-profit Research Institution of CAF(CAFYBB2022ZA001)the National Natural Science Foundation of China(42071065)。
文摘Although Quercus mongolica is a widely distributed,economically and ecologically important deciduous tree in northern China,models to accurately predict stand growth at a regional scale are limited.The physiological process model(3-PG)has the potential to predict stand growth dynamics under varying site conditions and climate change scenarios.Here,we used field inventory,tree ring sampling,and Bayesian calibration to parameterize a model for Q.mongolica.Stand volume and productivity were then predicted under present conditions and three future climate scenarios(RCP26,RCP45 and RCP85).Our results demonstrated that after Bayesian calibration,the posterior ranges of the sensitivity parameters apha Cx,wSx1000 and pRn accounted for 34%,45%and 65%,respectively,of their prior range.Calibration and validation results revealed a strong correlation between predicted and measured values(R^(2)>0.87,P<0.01),with<20%bias for all growth indicators.Stand volume was projected to increase by 145%and productivity by 80%by the year 2100 under the RCP85 scenario,although these projections may vary across regions.The present study developed a tailored set of 3-PG model parameters for Q.mongolica,based on a comprehensive range of climate conditions,stand structure,and age classes.These parameters offer a scientific basis to accurately predict growth of other monospecific oak or mixed-species stands.
文摘Assessing the stability of slopes is one of the crucial tasks of geotechnical engineering for assessing and managing risks related to natural hazards,directly affecting safety and sustainable development.This study primarily focuses on developing robust and practical hybrid models to predict the slope stability status of circular failure mode.For this purpose,three robust models were developed using a database including 627 case histories of slope stability status.The models were developed using the random forest(RF),support vector machine(SVM),and extreme gradient boosting(XGB)techniques,employing 5-fold cross validation approach.To enhance the performance of models,this study employs Bayesian optimizer(BO)to fine-tuning their hyperparameters.The results indicate that the performance order of the three developed models is RF-BO>SVM-BO>XGB-BO.Furthermore,comparing the developed models with previous models,it was found that the RF-BO model can effectively determine the slope stability status with outstanding performance.This implies that the RF-BO model could serve as a dependable tool for project managers,assisting in the evaluation of slope stability during both the design and operational phases of projects,despite the inherent challenges in this domain.The results regarding the importance of influencing parameters indicate that cohesion,friction angle,and slope height exert the most significant impact on slope stability status.This suggests that concentrating on these parameters and employing the RF-BO model can effectively mitigate the severity of geohazards in the short-term and contribute to the attainment of long-term sustainable development objectives.
基金support from the Kementerian Pendidikan,Kebudayaan,Riset,dan Teknologi of Indonesia through Regular Fundamental Grant No.049/E5/PG.02.00.PL/2024.
文摘Despite extensive prevention efforts and research,dengue hemorrhagic fever(DHF)remains a major public health challenge,particularly in tropical regions,with significant social,economic,and health consequences.Statistical models are crucial in studying infectious DHF by providing a structured framework to analyze transmission dynamics between humans(hosts)and mosquitoes(vectors).Depending on the disease characteristics,different stochastic compartmental models can be employed.This research applies Bayesian Integrated Nested Laplace Approximation(INLA)to the SIR-SI model for DHF data.The method delivers accurate parameter estimates,improved computational efficiency,and effective integration with early warning systems.The model compared to existing work usingMarkovChainMonteCarlo(MCMC)usingmonthlyDHF data from10 districts inKendari-Indonesia from2020–2023.WhileMCMC requires 10,000 iterations with an 80,000 burn-in,INLA achieves parameter convergence with just 10,000 iterations.The parameter estimation results show that INLA provides a better fit,with the lowest deviance=105.23,compared toMCMC.Risk analysis using INLA highlights dengue case dynamics fromJanuary toMay each year.Kadia and Wua-Wua districts consistently show high case numbers,emphasizing the need for targeted interventions in Kendari City.Early surveillance and control efforts are essential to curb mosquito breeding in these areas starting in January.In contrast,the Puuwatu,Kambu,and Kendari Barat districts are sporadic outbreaks,often linked to cases originating in Kadia andWua-Wua districts.
基金financial support from the Brazilian National Council for Scientific and Technological Development(CNPq)and the Federal University of Ouro PretoFinancial support from the Minas Gerais Research Foundation(FAPEMIG)under grant number APQ-06559-24 is also gratefully acknowledged。
文摘This study investigated forest recovery in the Atlantic Rainforest and Rupestrian Grassland of Brazil using the diffusive-logistic growth(DLG)model.This model simulates vegetation growth in the two mountain biomes considering spatial location,time,and two key parameters:diffusion rate and growth rate.A Bayesian framework is employed to analyze the model's parameters and assess prediction uncertainties.Satellite imagery from 1992 and 2022 was used for model calibration and validation.By solving the DLG model using the finite difference method,we predicted a 6.6%–51.1%increase in vegetation density for the Atlantic Rainforest and a 5.3%–99.9%increase for the Rupestrian Grassland over 30 years,with the latter showing slower recovery but achieving a better model fit(lower RMSE)compared to the Atlantic Rainforest.The Bayesian approach revealed well-defined parameter distributions and lower parameter values for the Rupestrian Grassland,supporting the slower recovery prediction.Importantly,the model achieved good agreement with observed vegetation patterns in unseen validation data for both biomes.While there were minor spatial variations in accuracy,the overall distributions of predicted and observed vegetation density were comparable.Furthermore,this study highlights the importance of considering uncertainty in model predictions.Bayesian inference allowed us to quantify this uncertainty,demonstrating that the model's performance can vary across locations.Our approach provides valuable insights into forest regeneration process uncertainties,enabling comparisons of modeled scenarios at different recovery stages for better decision-making in these critical mountain biomes.
基金Supported by National Key Research and Development Program(Grant No.2024YFB3312700)National Natural Science Foundation of China(Grant No.52405541)the Changzhou Municipal Sci&Tech Program(Grant No.CJ20241131)。
文摘Under the paradigm of Industry 5.0,intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration,where human expertise plays a central role in assembly processes.Despite advancements in intelligent and digital technologies,assembly process design still heavily relies on manual knowledge reuse,and inefficiencies and inconsistent quality in process documentation are caused.To address the aforementioned issues,this paper proposes a knowledge push method of complex product assembly process design based on distillation model-based dynamically enhanced graph and Bayesian network.First,an initial knowledge graph is constructed using a BERT-BiLSTM-CRF model trained with integrated human expertise and a fine-tuned large language model.Then,a confidence-based dynamic weighted fusion strategy is employed to achieve dynamic incremental construction of the knowledge graph with low resource consumption.Subsequently,a Bayesian network model is constructed based on the relationships between assembly components,assembly features,and operations.Bayesian network reasoning is used to push assembly process knowledge under different design requirements.Finally,the feasibility of the Bayesian network construction method and the effectiveness of Bayesian network reasoning are verified through a specific example,significantly improving the utilization of assembly process knowledge and the efficiency of assembly process design.
基金the financial support from the National Key R&D Program of China(Grant No.2021YFC3001003)Science and Technology Development Fund,Macao SAR(File No.0056/2023/RIB2)Guangdong Provincial Department of Science and Technology(Grant No.2022A0505030019).
文摘Challenges in stratigraphic modeling arise from underground uncertainty.While borehole exploration is reliable,it remains sparse due to economic and site constraints.Electrical resistivity tomography(ERT)as a cost-effective geophysical technique can acquire high-density data;however,uncertainty and nonuniqueness inherent in ERT impede its usage for stratigraphy identification.This paper integrates ERT and onsite observations for the first time to propose a novel method for characterizing stratigraphic profiles.The method consists of two steps:(1)ERT for prior knowledge:ERT data are processed by soft clustering using the Gaussian mixture model,followed by probability smoothing to quantify its depthdependent uncertainty;and(2)Observations for calibration:a spatial sequential Bayesian updating(SSBU)algorithm is developed to update the prior knowledge based on likelihoods derived from onsite observations,namely topsoil and boreholes.The effectiveness of the proposed method is validated through its application to a real slope site in Foshan,China.Comparative analysis with advanced borehole-driven methods highlights the superiority of incorporating ERT data in stratigraphic modeling,in terms of prediction accuracy at borehole locations and sensitivity to borehole data.Informed by ERT,reduced sensitivity to boreholes provides a fundamental solution to the longstanding challenge of sparse measurements.The paper further discusses the impact of ERT uncertainty on the proposed model using time-lapse measurements,the impact of model resolution,and applicability in engineering projects.This study,as a breakthrough in stratigraphic modeling,bridges gaps in combining geophysical and geotechnical data to address measurement sparsity and paves the way for more economical geotechnical exploration.
基金supported by the Biological Breeding-Major Projects in National Science and Technology(No.2023ZD0404405)the Earmarked Fund for China Agriculture Research System(No.CARS-pig-35)+2 种基金the National Natural Science Foundation of China(No.3227284,32302708)the 2115 Talent Development Program of China Agricultural University,the Chinese Universities Scientific Fund(No.2023TC196)the Seed Industry Revitalization Action Project of Guangdong Province(No.2024-XPY-06-001)。
文摘Background Multibreed genomic prediction(MBGP)is crucial for improving prediction accuracy for breeds with small populations,for which limited data are often available.Recent studies have demonstrated that partitioning the genome into nonoverlapping blocks to model heterogeneous genetic(co)variance in multitrait models can achieve higher joint prediction accuracy.However,the block partitioning method,a key factor influencing model performance,has not been extensively explored.Results We introduce mbBayesABLD,a novel Bayesian MBGP model that partitions each chromosome into nonoverlapping blocks on the basis of linkage disequilibrium(LD)patterns.In this model,marker effects within each block are assumed to follow normal distributions with block-specific parameters.We employ simulated data as well as empirical datasets from pigs and beans to assess genomic prediction accuracy across different models using cross-validation.The results demonstrate that mbBayesABLD significantly outperforms conventional MBGP models,such as GBLUP and BayesR.For the meat marbling score trait in pigs,compared with GBLUP,which does not account for heterogeneous genetic(co)variance,mbBayesABLD improves the prediction accuracy for the small-population breed Landrace by 15.6%.Furthermore,our findings indicate that a moderate level of similarity in LD patterns between breeds(with an average correlation of 0.6)is sufficient to improve the prediction accuracy of the target breed.Conclusions This study presents a novel LD block-based approach for multibreed genomic prediction.Our work provides a practical tool for livestock breeding programs and offers new insights into leveraging genetic diversity across breeds for improved genomic prediction.
基金Project(71073177)supported by the National Natural Science Foundation of ChinaProject(12JJ4077)supported by the Natural Science Foundation of Hunan Province of ChinaProject(2012zzts002)supported by the Fundamental Research Funds of Central South University,China
文摘Using VAR-DCC-GARCH model,the literature on commodity price was extended by exploring the co-movement between Chinese nonferrous metal prices and global nonferrous metal prices represented by the nonferrous metal prices from London Metal Exchange(LME).The results show that LME nonferrous metals prices still have a greater impact on Chinese nonferrous metals prices.However,the impact of Chinese nonferrous metals prices on LME nonferrous metals prices is still weak except for lead price.The co-movement of nonferrous metal prices between LME and China presents hysteretic nature,and it lasts for 7-8trading days.Furthermore,the co-movement between LME nonferrous metals prices and Chinese nonferrous metals prices has the characteristics of time-varying,and the correlation of lead prices between LME and China is the more stable than all other nonferrous metals prices.
基金The National Science Foundation by Changjiang Scholarship of Ministry of Education of China(No.BCS-0527508)the Joint Research Fund for Overseas Natural Science of China(No.51250110075)+1 种基金the Natural Science Foundation of Jiangsu Province(No.SBK200910046)the Postdoctoral Science Foundation of Jiangsu Province(No.0901005C)
文摘In order to improve crash occurrence models to account for the influence of various contributing factors, a conditional autoregressive negative binomial （CAR-NB） model is employed to allow for overdispersion （tackled by the NB component）, unobserved heterogeneity and spatial autocorrelation （captured by the CAR process）, using Markov chain Monte Carlo methods and the Gibbs sampler. Statistical tests suggest that the CAR-NB model is preferred over the CAR-Poisson, NB, zero-inflated Poisson, zero-inflated NB models, due to its lower prediction errors and more robust parameter inference. The study results show that crash frequency and fatalities are positively associated with the number of lanes, curve length, annual average daily traffic （AADT） per lane, as well as rainfall. Speed limit and the distances to the nearest hospitals have negative associations with segment-based crash counts but positive associations with fatality counts, presumably as a result of worsened collision impacts at higher speed and time loss during transporting crash victims.
文摘To improve the accuracy and speed in cycle-accurate power estimation, this paper uses multiple dimensional coefficients to build a Bayesian inference dynamic power model. By analyzing the power distribution and internal node state, we find the deficiency of only using port information. Then, we define the gate level number computing method and the concept of slice, and propose using slice analysis to distill switching density as coefficients in a special circuit stage and participate in Bayesian inference with port information. Experiments show that this method can reduce the power-per-cycle estimation error by 21.9% and the root mean square error by 25.0% compared with the original model, and maintain a 700 ＋ speedup compared with the existing gate-level power analysis technique.
基金The National Natural Science Foundation of China(No.8123003481271739+2 种基金81501453)the Special Program of Medical Science of Jiangsu Province(No.BL2013029)the Natural Science Foundation of Jiangsu Province(No.BK20141342)
文摘In order to classify the minimal hepatic encephalopathy （MHE） patients from healthy controls, the independent component analysis （ICA） is used to generate the default mode network （DMN） from resting-state functional magnetic resonance imaging （fMRI）. Then a Bayesian voxel- wised method, graphical-model-based multivariate analysis （GAMMA）, is used to explore the associations between abnormal functional integration within DMN and clinical variable. Without any prior knowledge, five machine learning methods, namely, support vector machines （SVMs）, classification and regression trees （ CART ）, logistic regression, the Bayesian network, and C4.5, are applied to the classification. The functional integration patterns were alternative within DMN, which have the power to predict MHE with an accuracy of 98%. The GAMMA method generating functional integration patterns within DMN can become a simple, objective, and common imaging biomarker for detecting MIIE and can serve as a supplement to the existing diagnostic methods.
基金Supported by the National Natural Science Foundation of China,No.81572420 and No.71871181the Key Research and Development Program of Shaanxi Province,No.2017ZDXM-SF-055the Multicenter Clinical Research Project of School of Medicine,Shanghai Jiaotong University,No.DLY201807
文摘BACKGROUND The factors affecting the prognosis and role of adjuvant therapy in advanced gallbladder carcinoma(GBC)after curative resection remain unclear.AIM To provide a survival prediction model to patients with GBC as well as to identify the role of adjuvant therapy.METHODS Patients with curatively resected advanced gallbladder adenocarcinoma(T3 and T4)were selected from the Surveillance,Epidemiology,and End Results database between 2004 and 2015.A survival prediction model based on Bayesian network(BN)was constructed using the tree-augmented na?ve Bayes algorithm,and composite importance measures were applied to rank the influence of factors on survival.The dataset was divided into a training dataset to establish the BN model and a testing dataset to test the model randomly at a ratio of 7:3.The confusion matrix and receiver operating characteristic curve were used to evaluate the model accuracy.RESULTS A total of 818 patients met the inclusion criteria.The median survival time was 9.0 mo.The accuracy of BN model was 69.67%,and the area under the curve value for the testing dataset was 77.72%.Adjuvant radiation,adjuvant chemotherapy(CTx),T stage,scope of regional lymph node surgery,and radiation sequence were ranked as the top five prognostic factors.A survival prediction table was established based on T stage,N stage,adjuvant radiotherapy(XRT),and CTx.The distribution of the survival time(>9.0 mo)was affected by different treatments with the order of adjuvant chemoradiotherapy(cXRT)>adjuvant radiation>adjuvant chemotherapy>surgery alone.For patients with node-positive disease,the larger benefit predicted by the model is adjuvant chemoradiotherapy.The survival analysis showed that there was a significant difference among the different adjuvant therapy groups(log rank,surgery alone vs CTx,P<0.001;surgery alone vs XRT,P=0.014;surgery alone vs cXRT,P<0.001).CONCLUSION The BN-based survival prediction model can be used as a decision-making support tool for advanced GBC patients.Adjuvant chemoradiotherapy is expected to improve the survival significantly for patients with node-positive disease.
基金Supported by the National High Technology Research and Development Program of China (2006AA040309)National BasicResearch Program of China (2007CB714000)
文摘Presented is a multiple model soft sensing method based on Affinity Propagation （AP）, Gaussian process （GP） and Bayesian committee machine （BCM）. AP clustering arithmetic is used to cluster training samples according to their operating points. Then, the sub-models are estimated by Gaussian Process Regression （GPR）. Finally, in order to get a global probabilistic prediction, Bayesian committee mactnne is used to combine the outputs of the sub-estimators. The proposed method has been applied to predict the light naphtha end point in hydrocracker fractionators. Practical applications indicate that it is useful for the online prediction of quality monitoring in chemical processes.
文摘Bayesian regularized BP neural network（BRBPNN） technique was applied in the chlorophyll-α prediction of Nanzui water area in Dongting Lake. Through BP network interpolation method, the input and output samples of the network were obtained. After the selection of input variables using stepwise/multiple linear regression method in SPSS i1.0 software, the BRBPNN model was established between chlorophyll-α and environmental parameters, biological parameters. The achieved optimal network structure was 3-11-1 with the correlation coefficients and the mean square errors for the training set and the test set as 0.999 and 0.000？8426, 0.981 and 0.0216 respectively. The sum of square weights between each input neuron and the hidden layer of optimal BRBPNN models of different structures indicated that the effect of individual input parameter on chlorophyll- α declined in the order of alga amount 〉 secchi disc depth（SD） 〉 electrical conductivity （EC）. Additionally, it also demonstrated that the contributions of these three factors were the maximal for the change of chlorophyll-α concentration, total phosphorus（TP） and total nitrogen（TN） were the minimal. All the results showed that BRBPNN model was capable of automated regularization parameter selection and thus it may ensure the excellent generation ability and robustness. Thus, this study laid the foundation for the application of BRBPNN model in the analysis of aquatic ecological data（chlorophyll-α prediction） and the explanation about the effective eutrophication treatment measures for Nanzui water area in Dongting Lake.
基金supported by the National Numerical Windtunnel Project,China(No.NNW2019ZT1-A03)the National Natural Science Foundation of China(No.11721202)。
文摘The Reynolds Averaged Navier-Stokes(RANS) models are still the workhorse in current engineering applications due to its high efficiency and robustness. However, the closure coefficients of RANS turbulence models are determined by model builders according to some simple fundamental flows, and the suggested values may not be applicable to complex flows, especially supersonic jet interaction flow. In this work, the Bayesian method is employed to recalibrate the closure coefficients of Spalart-Allmaras(SA) turbulence model to improve its performance in supersonic jet interaction problem and quantify the uncertainty of wall pressure and separation length. The embedded model error approach is applied to the Bayesian uncertainty analysis. Firstly, the total Sobol index is calculated by non-intrusive polynomial chaos method to represent the sensitivity of wall pressure and separation length to model parameters. Then, the pressure data and the separation length are respectively served as calibration data to get the posterior uncertainty of model parameters and Quantities of Interests(Qo Is). The results show that the relative error of the wall pressure predicted by the SA turbulence model can be reduced from 14.99% to 2.95% through effective Bayesian parameter estimation. Besides, the calibration effects of four likelihood functions are systematically evaluated. The posterior uncertainties of wall pressure and separation length estimated by different likelihood functions are significantly discrepant, and the Maximum a Posteriori(MAP) values of parameters inferred by all functions show better performance than the nominal values. Finally, the closure coefficients are also estimated at different jet total pressures. The similar posterior distributions of model parameters are obtained in different cases, and the MAP values of parameters calibrated in one case are also applicable to other cases.
基金Project supported by the National Natural Science Foundation of China(Grant No.61101173)the National Basic Research Program of China(Grant No.613206)+1 种基金the National High Technology Research and Development Program of China(Grant No.2012AA01A308)the State Scholarship Fund by the China Scholarship Council(CSC),and the Oversea Academic Training Funds,and University of Electronic Science and Technology of China(UESTC)
文摘When modeling a stealth aircraft with low RCS（Radar Cross Section）, conventional parameter estimation methods may cause a deviation from the actual distribution, owing to the fact that the characteristic parameters are estimated via directly calculating the statistics of RCS. The Bayesian–Markov Chain Monte Carlo（Bayesian-MCMC） method is introduced herein to estimate the parameters so as to improve the fitting accuracies of fluctuation models. The parameter estimations of the lognormal and the Legendre polynomial models are reformulated in the Bayesian framework. The MCMC algorithm is then adopted to calculate the parameter estimates. Numerical results show that the distribution curves obtained by the proposed method exhibit improved consistence with the actual ones, compared with those fitted by the conventional method. The fitting accuracy could be improved by no less than 25% for both fluctuation models, which implies that the Bayesian-MCMC method might be a good candidate among the optimal parameter estimation methods for stealth aircraft RCS models.
基金the National Natural Science Foundation of China(No.71371031)
文摘A degradation model with a random failure threshold is presented for the assessment of reliability by the Bayesian approach. This model is different from others in that the degradation process is proceeding under pre-specified periodical calibrations. And here a random threshold distribution instead of a constant threshold which is difficult to determine in practice is used. The system reliability is defined as the probability that the degradation signals do not exceed the random threshold. Based on the posterior distribution estimates of degradation performance, two models for Bayesian reliability assessments are presented in terms of the degradation performance and the distribution of random failure threshold. The methods proposed in this paper are very useful and practical for multi-stage system with uncertain failure threshold. This study perfects the degradation modeling approaches and plays an important role in the remaining useful life estimation and maintenance decision making.
基金Project supported by National Natural Science Foundation of China(No. 50675199)the Science and Technology Project of Zhejiang Province (No. 2006C11067), China
文摘The interaction between the heat source location, its intensity, thermal expansion coefficient, the machine system configuration and the running environment creates complex thermal behavior of a machine tool, and also makes thermal error prediction difficult. To address this issue, a novel prediction method for machine tool thermal error based on Bayesian networks (BNs) was presented. The method described causal relationships of factors inducing thermal deformation by graph theory and estimated the thermal error by Bayesian statistical techniques. Due to the effective combination of domain knowledge and sampled data, the BN method could adapt to the change of running state of machine, and obtain satisfactory prediction accuracy. Ex- periments on spindle thermal deformation were conducted to evaluate the modeling performance. Experimental results indicate that the BN method performs far better than the least squares (LS) analysis in terms of modeling estimation accuracy.
