In recent years,photo-powered energy storage devices have attracted considerable research attention due to their potential applications in smart electronics.In this review,we present a comprehensive summary of recent ...In recent years,photo-powered energy storage devices have attracted considerable research attention due to their potential applications in smart electronics.In this review,we present a comprehensive summary of recent developments in two distinct but highly promising energy storage technologies,photo-assisted metal-air batteries and photo-supercapacitors.The section on metal-air batteries primarily describes the electrochemical performance of Zn-air and Li-air systems,innovative photo-electrode designs,and mechanisms that enhance oxygen evolution and reduction reactions.A brief discussion is also provided of other metal-air systems,including Mg,Fe,and Al.In contrast,the section on photo-supercapacitors explores recent advancements in light-driven charge storage,electrode materials,and device architectures,presenting a comparative performance analysis of materials such as metal oxides,sulfides,and perovskites.Various critical challenges,including material stability,efficiency under varying light conditions,and scalability,are also thoroughly examined.Despite their different working principles,both technologies hold great potential to increase energy efficiency and sustainability through the use of photo-assisted processes.The purpose of this review is to bridge existing knowledge gaps and propose future directions for research in these emerging fields.展开更多
The growing concern for energy efficiency and the increasing deployment of intermittent renewable energies has led to the development of technologies for capturing,storing,and discharging energy.Supercapacitors can be...The growing concern for energy efficiency and the increasing deployment of intermittent renewable energies has led to the development of technologies for capturing,storing,and discharging energy.Supercapacitors can be considered where batteries do not meet the requirements.However,supercapacitors in systems with a slower charge/discharge cycle,such as photovoltaic systems(PVS),present other obstacles that make replacing batteries more challenging.An extensive literature review unveils a knowledge gap regarding a methodological comparison of batteries and supercapacitors.In this study,we address the technological feasibility of intermittent renewable energy generation systems,focusing on storage solutions for PVS energy.We propose a framework according to one of the essential parameters for their application in PVS:Energy Density or Specific Energy(Wh/kg).Through computational modelling,issues related to the intermittency and seasonality of the solar energy source are addressed,evaluating the possible benefits of implementing batteries,supercapacitors,and hybrid solutions in renewable energy generation systems.Also,the characteristics of two hypothetical configurations of photovoltaic systems,off-grid and on-grid,were analysed.This analysis highlights the characteristics of totally isolated systems(e.g.,on an island or remote village)and systems connected to the grid(e.g.,solar farms),where eliminating the use of batteries can bring significant benefits,in addition to tax incentives,which are decisive in the investment decision-making process.The results clarify the viability of PVS and allow an understanding of parameters that can support the technical decision process between isolated or non-isolated systems,reflecting economic and financial issues.展开更多
In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to tha...In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to that of batteries,while maintaining a high power density.We re-port a porous carbon material produced by immersing pop-lar wood(PW)sawdust in a solution of KOH and graphene oxide(GO),followed by carbonization.The resulting mater-ial has exceptional properties as an electrode for high-en-ergy supercapacitors.Compared to the material prepared by the direct carbonization of PW,its electrical conductivity was in-creased from 0.36 to 26.3 S/cm.Because of this and a high microporosity of over 80%,which provides fast electron channels and a large ion storage surface,when used as the electrodes for a symmetric supercapacitor,it gave a high energy density of 27.9 Wh/kg@0.95 kW/kg in an aqueous electrolyte of 1.0 mol/L Na_(2)SO_(4).The device also had battery-level energy storage with maximum energy densities of 73.9 Wh/kg@2.0 kW/kg and 67.6 Wh/kg@40 kW/kg,an ultrahigh power density,in an organic electrolyte of 1.0 mol/L TEABF4/AN.These values are comparable to those of 30−45 Wh/kg for Pb-acid batteries and 30−55 Wh/kg for aqueous lithium batteries.This work indicates a way to prepare carbon materials that can be used in supercapacit-ors with ultrahigh energy and power densities.展开更多
In order to address the widespread data shortage problem in battery research,this paper proposes a generative adversarial network model that combines it with deep convolutional networks,the Wasserstein distance,and th...In order to address the widespread data shortage problem in battery research,this paper proposes a generative adversarial network model that combines it with deep convolutional networks,the Wasserstein distance,and the gradient penalty to achieve data augmentation.To lower the threshold for implementing the proposed method,transfer learning is further introduced.The W-DC-GAN-GP-TL framework is thereby formed.This framework is evaluated on 3 different publicly available datasets to judge the quality of generated data.Through visual comparisons and the examination of two visualization methods(probability density function(PDF)and principal component analysis(PCA)),it is demonstrated that the generated data is hard to distinguish from the real data.The application of generated data for training a battery state model using transfer learning is further evaluated.Specifically,Bi-GRU-based and Transformer-based methods are implemented on 2 separate datasets for estimating state of health(SOH)and state of charge(SOC),respectively.The results indicate that the proposed framework demonstrates satisfactory performance in different scenarios:for the data replacement scenario,where real data are removed and replaced with generated data,the state estimator accuracy decreases only slightly;for the data enhancement scenario,the estimator accuracy is further improved.The estimation accuracy of SOH and SOC is as low as 0.69%and 0.58%root mean square error(RMSE)after applying the proposed framework.This framework provides a reliable method for enriching battery measurement data.It is a generalized framework capable of generating a variety of time series data.展开更多
Herein,we developed three-dimensional pristine titanium dioxide(TiO_(2))photo-electrocatalyst material(PEM)with homogeneous distribution of oxygen vacancies(OV)for lithium-oxygen(Li-O_(2))battery system(denoted as LOB...Herein,we developed three-dimensional pristine titanium dioxide(TiO_(2))photo-electrocatalyst material(PEM)with homogeneous distribution of oxygen vacancies(OV)for lithium-oxygen(Li-O_(2))battery system(denoted as LOBs)under illumination.This rationally designed OV-TiO_(2)photoelectrode-catalyst has exhibited excellent capacity,small overpotential,long-term cycle stability,and higher rate capability performance according to our electrochemical experiment study.In short,OV as photoinduced charge separation centers(inert surface atomic modification method)fascinate the effective separation of electrons(e^(−))and holes(h^(+)).In turn,induced e−and h+are beneficial to the oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)process.More importantly,machine learning(ML)algorithms to analyze and optimize battery performance are innovative in the photoelectrical field.The utility of ML analysis is extensively shown to be effective in learning the in/output connection of interest.Based on ML analysis results,the OV-TiO_(2)cathode is indeed the key point to extend the LOB life span.More importantly,our brilliant anatase OV-TiO_(2)revealed the optimization of electrode material for high performance and reversibility in LOBs.We expect that it will bring special OV-TiO_(2)and some other hierarchical hollow nanomaterials,a big step toward battery technology no matter in cost-effectiveness and environmentally friendly aspects.展开更多
To address the challenge of balancing thermal management and thermal runaway mitigation,it is crucial to explore effective methods for enhancing the safety of lithium-ion battery systems.Herein,an innovative hydrated ...To address the challenge of balancing thermal management and thermal runaway mitigation,it is crucial to explore effective methods for enhancing the safety of lithium-ion battery systems.Herein,an innovative hydrated salt composite phase change material(HSCPCM)with dual phase transition temperature zones has been proposed.This HSCPCM,denoted as SDMA10,combines hydrophilic modified expanded graphite,an acrylic emulsion coating,and eutectic hydrated salts to achieve leakage prevention,enhanced thermal stability,cycling stability,and superior phase change behavior.Battery modules incorporating SDMA10 demonstrate significant thermal control capabilities.Specifically,the cylindrical battery modules with SDMA10 can maintain maximum operating temperatures below 55°C at 4 C discharge rate,while prismatic battery modules can keep maximum operating temperatures below 65°C at 2 C discharge rate.In extreme battery overheating conditions simulated using heating plates,SDMA10 effectively suppresses thermal propagation.Even when the central heating plate reaches 300°C,the maximum temperature at the module edge heating plates remains below 85°C.Further,compared to organic composite phase change materials(CPCMs),the battery module with SDMA10 can further reduce the peak thermal runaway temperature by 93°C and delay the thermal runaway trigger time by 689 s,thereby significantly decreasing heat diffusion.Therefore,the designed HSCPCM integrates excellent latent heat storage and thermochemical storage capabilities,providing high thermal energy storage density within the thermal management and thermal runaway threshold temperature range.This research will offer a promising pathway for improving the thermal safety performance of battery packs in electric vehicles and other energy storage systems.展开更多
Herein,manganese(Mn)‑doped poly(1,5‑diaminonaphthalene)(PN)electrode material(Mn@PN)was synthesized via chemical oxidative polymerization.The material′s distinctive vesicular architecture enables rapid ion transport ...Herein,manganese(Mn)‑doped poly(1,5‑diaminonaphthalene)(PN)electrode material(Mn@PN)was synthesized via chemical oxidative polymerization.The material′s distinctive vesicular architecture enables rapid ion transport while maintaining the structural stability of the electrode under continuous charge‑discharge cycles.Electrochemical characterization under a three‑electrode system revealed exceptional rate capability:Mn@PN delivered an ultrahigh specific capacitance of 10318 F·g^(-1) at a low current density of 3 A·g^(-1) and retained 9415 F·g^(-1)(91.2%retention compared to the value at 3 A·g^(-1))even at an ultrahigh current density of 50 A·g^(-1).Moreover,the material exhibited 97.4%capacitance retention after 9000 cycles at 30 A·g^(-1),corresponding with a low capacitance decay rate of 0.003‰per cycle,significantly outperforming conventional conductive polymers like polyaniline(PANI).An asymmetric supercapacitor assembled with Mn@PN as the positive electrode(Mn@PN||AC)achieved an energy density of 328 Wh·kg^(-1) at 15 A·g^(-1) and retained 80.7%of its initial specific capacitance after 4000 cycles at 20 A·g^(-1).展开更多
The octahedral tunnel-like three-dimensional(3D)structure of V_(2)O_(3)enables fast metal ion(de)intercalation and high capacity in aqueous zinc-ion batteries(ZIBs),but suffers from phase transition-induced structural...The octahedral tunnel-like three-dimensional(3D)structure of V_(2)O_(3)enables fast metal ion(de)intercalation and high capacity in aqueous zinc-ion batteries(ZIBs),but suffers from phase transition-induced structural degradation and capacity fading.Herein,we demonstrate that the undesirable phase transition of V_(2)O_(3)can be effectively suppressed through a new La^(3+)doping strategy and its implementation as a robust ZIBs cathode.The introduced La^(3+)ions not only can increase cell volume and expand ion channels of V_(2)O_(3)but also offer plentiful Zn^(2+)storage sites and promote the transport of Zn^(2+)ions and electrons.In particular,the doping of La^(3+)maintains the octahedral tunnel structure of V_(2)O_(3)and prevents its phase transition during(dis)charge,which improves the cycle stability of the V_(2)O_(3)cathode in ZIBs.By virtue of the above favorable factors,La-doped V_(2)O_(3)electrode presents an impressive discharge capacity of632.1 m Ah g^(-1)at 0.1 A g^(-1)after 100 cycles with a capacity retention up to 93.1%.Even at 10 A g^(-1),its discharge capacity remains at 342.7 mAh g^(-1)after 1000 cycles with a capacity attenuation of solely0.0069%per cycle.This work establishes rare-earth cation doping as a universal paradigm to reconcile structural stability and multi-electron redox activity in high-capacity battery electrodes.展开更多
Herein,3‑aminopropyltriethoxysilane(APTES)was used to modify F‑containing silica slag(SS)by simple grafting and served as a multifunctional barrier layer.The amino group(—NH2)in the amino‑modified SS(NH2‑SS)forms lig...Herein,3‑aminopropyltriethoxysilane(APTES)was used to modify F‑containing silica slag(SS)by simple grafting and served as a multifunctional barrier layer.The amino group(—NH2)in the amino‑modified SS(NH2‑SS)forms ligand bonds or hydrogen bonds with sulfur ions in lithium polysulfides(LiPSs),thus inhibiting the shuttle effect.Electrochemical analyses demonstrated that lithium‑sulfur(Li‑S)batteries employing the NH2‑SS interlayer exhibited discharge specific capacities of 1048 and 789 mAh·g^(-1) at 0.2C and 2C,respectively,and even at 4C,the initial discharge specific capacity remained at 590 mAh·g^(-1),outperforming the Li‑S battery with unmodified SS as the interlayer.展开更多
Capacitor-related energy storage devices with high power density,excellent cycle stability,wide operating temperature range,and environmental friendliness have enjoyed great popularity.However,the relatively poor ener...Capacitor-related energy storage devices with high power density,excellent cycle stability,wide operating temperature range,and environmental friendliness have enjoyed great popularity.However,the relatively poor energy density hinders their practical large-scale application.Electrospun carbon-based materials are ideal candidates owing to their large specific surface area(SSA),affluent porosity,high conductivity,good flexibility,and stable chemical properties.Therefore,this review provides the research progress of electrospun carbon-based materials for conventional and hybrid supercapacitors in recent years.First,the electrospinning technology is briefly introduced,and then the research progress of various electrospun carbon-based materials for conventional and hybrid supercapacitors is reviewed.Finally,the problems faced by electrospinning technology and developing electrospun carbon-based materials for conventional and hybrid supercapacitors are summarized and prospected.It is expected to provide some ideas for developing new high-performance electrospun carbon-based materials for conventional and hybrid supercapacitors.展开更多
Lithium–sulfur(Li–S)batteries are promisingcandidates for next-generation energy storagegiven their high energy density and potential low cost.Chemically activated carbon(CAC)is often used fortheir cathodes,because ...Lithium–sulfur(Li–S)batteries are promisingcandidates for next-generation energy storagegiven their high energy density and potential low cost.Chemically activated carbon(CAC)is often used fortheir cathodes,because it has a high specific surfacearea for sulfur loading.We have developed a pressurizedphysical activation(PPA)method that producedan activated carbon(PPAC)with a high specific surfacearea comparable to that of CAC.The pore structure of PPAC could be changed and its use as a cathode material for Li–Sbatteries was investigated.Battery tests at different capacity rates(C-rates)showed that it had a much improved high-rate performancewith a discharge capacity of 900 mAh/(g of sulfur)at 1 C,in contrast to only 600 mAh/(g of sulfur)for CAC.Porestructure analyses showed that PPAC prepared at a high activation temperature(1000℃)had unusual channel-like mesoporesbetween the microdomains that are the basic structural units of artificial carbon materials.These are connected to microporesdeveloped in each microdomain,and deliver ions from the surroundings to the internal pores and vice versa.The well-developedmicropores and mesopores of PPAC respectively ensured the high adsorption of lithium polysulfides and a high rate ofion diffusion.Compared to CAC,PPAC is a high-performance,low-cost cathode material that is promising for use in futureLi–S batteries.展开更多
As a high-energy-density primary battery,the Li-SOCl_(2) battery offers significant advantages over other primary systems,including a high operating voltage,wide temperature tolerance,and low self-discharge rate.Howev...As a high-energy-density primary battery,the Li-SOCl_(2) battery offers significant advantages over other primary systems,including a high operating voltage,wide temperature tolerance,and low self-discharge rate.However,owing to the irreversible electrochemical reaction mechanism,despite its energy density of up to 700 Wh kg^(-1) at the cell level,this battery system has remained confined to the category of primary batteries,thereby limiting its use in cyclic applications.Recent advances in electrochemical technologies have enabled the reversible redox chemistry of Li-SOCl_(2) batteries,transforming them into rechargeable systems.This article provides a systematic overview of the technical evolution,reaction mechanisms,safety constraints,engineering countermeasures,and electrochemical performance enhancement of Li-SOCl_(2) primary batteries since their introduction.First,the modification methods for the lithium anode,carbon cathode,electrolyte,and electrocatalyst in Li-SOCl_(2) primary batteries are discussed,along with their mechanisms for improving electrochemical performance.We then review the SOCl_(2)-based rechargeable Li metal batteries(LMBs)that evolved from the Li-SOCl_(2) primary batteries.With their higher energy density,these systems have become promising candidates to replace traditional Li-ion batteries(LIBs).This review focuses on the construction of key components,such as the positive electrode carrier,novel alloy anode,and electrolyte,as well as their impact on electrochemical performance in rechargeable batteries.Finally,we summarize current research progress and propose future directions for SOCl_(2)-based LMBs aimed at enhancing overall electrochemical performance.These insights provide a theoretical foundation for the development of next-generation high-energy-density energy-storage technologies.展开更多
Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of va...Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.展开更多
1.Introduction Driven by the growing demand for energy storage systems in portable electronic devices,electric vehicles,and unmanned aerial vehicles,lithium-ion batteries(LIBs)have received considerable and sustained ...1.Introduction Driven by the growing demand for energy storage systems in portable electronic devices,electric vehicles,and unmanned aerial vehicles,lithium-ion batteries(LIBs)have received considerable and sustained attention.The performance of routine LIBs is approaching the ceiling,particularly in terms of energy density,making it difficult to meet the ever-increasing demand for energy density[1].展开更多
Despite their high theoretical capacity and energy density,lithiumsulfur(Li–S)batteries still face challenges such as soluble lithium polysulfides(LiPSs)shuttling and sluggish redox kinetics.In this work,we used a no...Despite their high theoretical capacity and energy density,lithiumsulfur(Li–S)batteries still face challenges such as soluble lithium polysulfides(LiPSs)shuttling and sluggish redox kinetics.In this work,we used a novel MoS_(2)-Mo_(2)C heterostructure anchored on a carbon sponge(CS)as a Li_(2)S host to solve these problems.A simple hydrothermal process following carbothermal reduction was used to construct the MoS_(2)-Mo_(2)C heterostructure,enabling control of the phases and integration of MoS_(2) and Mo_(2)C.Structural characterization confirmed the coherent interface of the heterostructure with a precise orientation relationship between the two phases and their uniform distribution.An evaluation of the adsorption and catalytic performance of the material showed that it has an exceptional LiPSs adsorption capacity with faster conversion from Li_(2)S_(4) to Li_(2)S_(2).Density functional theory calculations further confirmed these results.As a result,the cathode had a high initial discharge capacity of 693 mAh g^(−1) at 0.2 C and achieved stable cycling at 2 C for 500 cycles with a low decay rate of 0.107%per cycle.The heterostructure design,coupled with the macroporous CS framework,effectively prevented the shuttling and increased sulfur utilization,offering a promising way to produce practical high-energydensity Li–S batteries.展开更多
Nowadays,higher requirements are put forward to the storage and utilization of energy,and supercapacitor is a kind of energy storage electronic devices.The resulting CA-N,with a specific surface area of 320.6 m^(2)/g ...Nowadays,higher requirements are put forward to the storage and utilization of energy,and supercapacitor is a kind of energy storage electronic devices.The resulting CA-N,with a specific surface area of 320.6 m^(2)/g and a pore volume of 0.28 cm^(3)/g,demonstrated a remarkable supercapacitance of 283.3 F/g.As a mesoporous material,CA-N offers numerous channels for the diffusion and absorption of electrolyte ions.Furthermore,it exhibited an impressive capacity retention rate of 98.48% after 5000 charge-discharge cycles.These outstanding electrochemical properties highlight the potential of CA-N for applications in energy storage.展开更多
With the growing global energy demand and the pressing need for a clean energy transition,supercapacitors(SCs)have demonstrated significant application potential in electric vehicles,wearable electronics,and renewable...With the growing global energy demand and the pressing need for a clean energy transition,supercapacitors(SCs)have demonstrated significant application potential in electric vehicles,wearable electronics,and renewable energy storage systems owing to their rapid charge-discharge capability,exceptional power density,and prolonged cycle life.The improvement of their overall performance fundamentally depends on the synergistic design of electrode materials and electrolyte systems,as well as the precise regulation of the electrode-electrolyte interface.This review focuses on the key components of supercapacitors,systematically reviewing the design strategies of high-performance electrode materials,outlining recent advances in novel electrolyte systems,and comprehensively discussing the critical roles of interfacial reinforcement and optimization in enhancing device energy density,power performance,and cycling stability.Furthermore,interfacial engineering strategies and innovations in device architecture are proposed to address interfacial degradation in flexible SCs under mechanical stress.Finally,key future research directions are highlighted,including the development of high-voltage and wide-temperature-range electrolyte systems and the integrated advancement of multiscale in situ characterization techniques and theoretical modeling.This review aims to provide theoretical guidance and innovative strategies for material design,contributing toward the realization of next-generation supercapacitors with enhanced energy density and reliability.展开更多
Understanding how aging influences the thermal hazards of lithium-ion batteries(LIBs)is critical for enhancing their safety across a wide range of applications.This study systematically investigates the thermal runawa...Understanding how aging influences the thermal hazards of lithium-ion batteries(LIBs)is critical for enhancing their safety across a wide range of applications.This study systematically investigates the thermal runaway(TR)behavior of LIBs,with particular emphasis on combined-pathway aging,evaluated in terms of normalized usable capacity(U_(E)).Key thermal safety parameters,i.e.,TR triggering temperature,mass loss,and heat generation under diverse aging conditions,are quantified.To enable a fair comparison,thermal hazards are evaluated based on equivalent usable capacity,revealing that aged cells exhibit lower TR triggering temperatures and higher heat generation than fresh cells under thermal abuse with elevated thermal risks.Mechanistic analysis identifies lithium plating,solid electrolyte interphase(SEI)formation,and lithium depletion,particularly under high-temperature charging,as the dominant contributors to increased hazard.Using an aging-stressor matrix,a trade-off between high-C-rateinduced thermal instability and high-temperature-induced thermal stability is discovered and quantified,underscoring the strong dependence of thermal hazards on specific aging pathways.This work advances the fundamental understanding of aging-induced safety risks in LIBs and offers practical guidance for the development of safer battery systems,optimized charging protocols,and improved battery management strategies across applications in electric vehicles,consumer electronics,and grid-scale energy storage.展开更多
With the widespread application of lithium batteries in electric vehicles and energy storage systems,battery-related safety and reliability issues have become increasingly prominent.Conventional monitoring methods oft...With the widespread application of lithium batteries in electric vehicles and energy storage systems,battery-related safety and reliability issues have become increasingly prominent.Conventional monitoring methods often struggle to address dynamic changes under complex operando.In recent years,flexible sensing technology has emerged as a promising solution for battery health monitoring due to its high adaptability and conformability to complex structures.Meanwhile,empowered by artificial intelligence(AI)for data analysis,the collected data enables efficient and accurate state assessment,offering robust support for accident prevention.Against this background,this paper first explores the integrated applications of flexible sensors in battery health monitoring and their unique advantages in addressing complex battery operating conditions,while analyzing the potential of AI in battery state analysis.Subsequently,it systematically reviews mainstream flexible sensing technologies(e.g.,film sensors,thermocouples,and optical fiber sensors),elucidating their mechanisms for revealing intricate internal battery processes during operation.Finally,the paper discusses AI’s role in enhancing monitoring efficiency and accuracy,and envisions future research directions and application prospects.This work aims to provide technical references for the battery health monitoring field as well as promote the application of flexible sensing technologies in improving battery system safety and reliability.展开更多
Zeolite imidazolate framework(ZIF)-derived bimetallic sulfides and layered double hydroxides(LDHs)have emerged as promising electrode materials for supercapacitors,owing to their porous layered structures,high electro...Zeolite imidazolate framework(ZIF)-derived bimetallic sulfides and layered double hydroxides(LDHs)have emerged as promising electrode materials for supercapacitors,owing to their porous layered structures,high electrochemical activity,tun-able molecular architectures,low cost,and high specific capacitance.In this study,a unique composite material comprising ZIF-derived ZnCo bimetallic sulfide and LDH with a honeycomb-like structure was in situ grown on nickel foil(NF)via a con-trolled self-sacrificial template strategy.In contrast to previous reports,the resulting ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF compos-ite integrates the advantages of MXene,LDH,and sulfides,leading to significantly enhanced conductivity,structural stability,and catalytic activity.The ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF electrode exhibits a uniform network structure with a thickness of approximately 1μm coated on NF,and delivers a high specific capacitance of 1356.1 F·g^(-1)at a current density of 2 A·g^(-1).Further-more,an asymmetric supercapacitor assembled with ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF as the positive electrode and activated car-bon as the negative electrode achieves a high energy density of 34.08 Wh·kg^(-1)and a power density of 742.3 W·kg^(-1)at 1 A·g^(-1).This device successfully powers LED lights for 5 min,demonstrating its practical applicability.These results underscore the out-standing electrochemical performance of the ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF electrode,highlighting its potential for applica-tions in supercapacitors and related energy storage fields.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52263028)Xingdian Talent Funding Project(Year 2022,Yunnan Province,China).
文摘In recent years,photo-powered energy storage devices have attracted considerable research attention due to their potential applications in smart electronics.In this review,we present a comprehensive summary of recent developments in two distinct but highly promising energy storage technologies,photo-assisted metal-air batteries and photo-supercapacitors.The section on metal-air batteries primarily describes the electrochemical performance of Zn-air and Li-air systems,innovative photo-electrode designs,and mechanisms that enhance oxygen evolution and reduction reactions.A brief discussion is also provided of other metal-air systems,including Mg,Fe,and Al.In contrast,the section on photo-supercapacitors explores recent advancements in light-driven charge storage,electrode materials,and device architectures,presenting a comparative performance analysis of materials such as metal oxides,sulfides,and perovskites.Various critical challenges,including material stability,efficiency under varying light conditions,and scalability,are also thoroughly examined.Despite their different working principles,both technologies hold great potential to increase energy efficiency and sustainability through the use of photo-assisted processes.The purpose of this review is to bridge existing knowledge gaps and propose future directions for research in these emerging fields.
基金the financial support from:“Ministerio de Ciencia,Innovación y Universidades”of Spain(PID2021-127713OA-I00,PID2021-123511OB-C33,PID2021-124139NBC22-CIN/AEI/10.13039/501100011033/FEDER,EU,TED2021-129851B-I00-/AEI/10.13039/501100011033/Unión Europea NextGenerationEU/PRTR and RED2022-134219-T)“Ministerio da Educacao-MEC”of Brazil(CAPES PDPG-POSDOC 88887.807971/2023-00).
文摘The growing concern for energy efficiency and the increasing deployment of intermittent renewable energies has led to the development of technologies for capturing,storing,and discharging energy.Supercapacitors can be considered where batteries do not meet the requirements.However,supercapacitors in systems with a slower charge/discharge cycle,such as photovoltaic systems(PVS),present other obstacles that make replacing batteries more challenging.An extensive literature review unveils a knowledge gap regarding a methodological comparison of batteries and supercapacitors.In this study,we address the technological feasibility of intermittent renewable energy generation systems,focusing on storage solutions for PVS energy.We propose a framework according to one of the essential parameters for their application in PVS:Energy Density or Specific Energy(Wh/kg).Through computational modelling,issues related to the intermittency and seasonality of the solar energy source are addressed,evaluating the possible benefits of implementing batteries,supercapacitors,and hybrid solutions in renewable energy generation systems.Also,the characteristics of two hypothetical configurations of photovoltaic systems,off-grid and on-grid,were analysed.This analysis highlights the characteristics of totally isolated systems(e.g.,on an island or remote village)and systems connected to the grid(e.g.,solar farms),where eliminating the use of batteries can bring significant benefits,in addition to tax incentives,which are decisive in the investment decision-making process.The results clarify the viability of PVS and allow an understanding of parameters that can support the technical decision process between isolated or non-isolated systems,reflecting economic and financial issues.
文摘In order to meet the demands of new-generation electric vehicles that require high power output(over 15 kW/kg),it is crucial to increase the energy density of car-bon-based supercapacitors to a level comparable to that of batteries,while maintaining a high power density.We re-port a porous carbon material produced by immersing pop-lar wood(PW)sawdust in a solution of KOH and graphene oxide(GO),followed by carbonization.The resulting mater-ial has exceptional properties as an electrode for high-en-ergy supercapacitors.Compared to the material prepared by the direct carbonization of PW,its electrical conductivity was in-creased from 0.36 to 26.3 S/cm.Because of this and a high microporosity of over 80%,which provides fast electron channels and a large ion storage surface,when used as the electrodes for a symmetric supercapacitor,it gave a high energy density of 27.9 Wh/kg@0.95 kW/kg in an aqueous electrolyte of 1.0 mol/L Na_(2)SO_(4).The device also had battery-level energy storage with maximum energy densities of 73.9 Wh/kg@2.0 kW/kg and 67.6 Wh/kg@40 kW/kg,an ultrahigh power density,in an organic electrolyte of 1.0 mol/L TEABF4/AN.These values are comparable to those of 30−45 Wh/kg for Pb-acid batteries and 30−55 Wh/kg for aqueous lithium batteries.This work indicates a way to prepare carbon materials that can be used in supercapacit-ors with ultrahigh energy and power densities.
基金funded by the Bavarian State Ministry of Science,Research and Art(Grant number:H.2-F1116.WE/52/2)。
文摘In order to address the widespread data shortage problem in battery research,this paper proposes a generative adversarial network model that combines it with deep convolutional networks,the Wasserstein distance,and the gradient penalty to achieve data augmentation.To lower the threshold for implementing the proposed method,transfer learning is further introduced.The W-DC-GAN-GP-TL framework is thereby formed.This framework is evaluated on 3 different publicly available datasets to judge the quality of generated data.Through visual comparisons and the examination of two visualization methods(probability density function(PDF)and principal component analysis(PCA)),it is demonstrated that the generated data is hard to distinguish from the real data.The application of generated data for training a battery state model using transfer learning is further evaluated.Specifically,Bi-GRU-based and Transformer-based methods are implemented on 2 separate datasets for estimating state of health(SOH)and state of charge(SOC),respectively.The results indicate that the proposed framework demonstrates satisfactory performance in different scenarios:for the data replacement scenario,where real data are removed and replaced with generated data,the state estimator accuracy decreases only slightly;for the data enhancement scenario,the estimator accuracy is further improved.The estimation accuracy of SOH and SOC is as low as 0.69%and 0.58%root mean square error(RMSE)after applying the proposed framework.This framework provides a reliable method for enriching battery measurement data.It is a generalized framework capable of generating a variety of time series data.
基金supported by the Australian Research Council Discovery Program(No.DP220103416)Australian Research Council Future Fellowships(Nos.FT200100730 and FT210100804)National Natural Science Foundation of China(Nos.52474431,51874051 and 52111530139).
文摘Herein,we developed three-dimensional pristine titanium dioxide(TiO_(2))photo-electrocatalyst material(PEM)with homogeneous distribution of oxygen vacancies(OV)for lithium-oxygen(Li-O_(2))battery system(denoted as LOBs)under illumination.This rationally designed OV-TiO_(2)photoelectrode-catalyst has exhibited excellent capacity,small overpotential,long-term cycle stability,and higher rate capability performance according to our electrochemical experiment study.In short,OV as photoinduced charge separation centers(inert surface atomic modification method)fascinate the effective separation of electrons(e^(−))and holes(h^(+)).In turn,induced e−and h+are beneficial to the oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)process.More importantly,machine learning(ML)algorithms to analyze and optimize battery performance are innovative in the photoelectrical field.The utility of ML analysis is extensively shown to be effective in learning the in/output connection of interest.Based on ML analysis results,the OV-TiO_(2)cathode is indeed the key point to extend the LOB life span.More importantly,our brilliant anatase OV-TiO_(2)revealed the optimization of electrode material for high performance and reversibility in LOBs.We expect that it will bring special OV-TiO_(2)and some other hierarchical hollow nanomaterials,a big step toward battery technology no matter in cost-effectiveness and environmentally friendly aspects.
基金financially supported by Natural Science Foundation of Guangdong province(2024A1515010228)CATARC Automotive Inspection Center Excellent Engineer Program(2023B0909050007).
文摘To address the challenge of balancing thermal management and thermal runaway mitigation,it is crucial to explore effective methods for enhancing the safety of lithium-ion battery systems.Herein,an innovative hydrated salt composite phase change material(HSCPCM)with dual phase transition temperature zones has been proposed.This HSCPCM,denoted as SDMA10,combines hydrophilic modified expanded graphite,an acrylic emulsion coating,and eutectic hydrated salts to achieve leakage prevention,enhanced thermal stability,cycling stability,and superior phase change behavior.Battery modules incorporating SDMA10 demonstrate significant thermal control capabilities.Specifically,the cylindrical battery modules with SDMA10 can maintain maximum operating temperatures below 55°C at 4 C discharge rate,while prismatic battery modules can keep maximum operating temperatures below 65°C at 2 C discharge rate.In extreme battery overheating conditions simulated using heating plates,SDMA10 effectively suppresses thermal propagation.Even when the central heating plate reaches 300°C,the maximum temperature at the module edge heating plates remains below 85°C.Further,compared to organic composite phase change materials(CPCMs),the battery module with SDMA10 can further reduce the peak thermal runaway temperature by 93°C and delay the thermal runaway trigger time by 689 s,thereby significantly decreasing heat diffusion.Therefore,the designed HSCPCM integrates excellent latent heat storage and thermochemical storage capabilities,providing high thermal energy storage density within the thermal management and thermal runaway threshold temperature range.This research will offer a promising pathway for improving the thermal safety performance of battery packs in electric vehicles and other energy storage systems.
文摘Herein,manganese(Mn)‑doped poly(1,5‑diaminonaphthalene)(PN)electrode material(Mn@PN)was synthesized via chemical oxidative polymerization.The material′s distinctive vesicular architecture enables rapid ion transport while maintaining the structural stability of the electrode under continuous charge‑discharge cycles.Electrochemical characterization under a three‑electrode system revealed exceptional rate capability:Mn@PN delivered an ultrahigh specific capacitance of 10318 F·g^(-1) at a low current density of 3 A·g^(-1) and retained 9415 F·g^(-1)(91.2%retention compared to the value at 3 A·g^(-1))even at an ultrahigh current density of 50 A·g^(-1).Moreover,the material exhibited 97.4%capacitance retention after 9000 cycles at 30 A·g^(-1),corresponding with a low capacitance decay rate of 0.003‰per cycle,significantly outperforming conventional conductive polymers like polyaniline(PANI).An asymmetric supercapacitor assembled with Mn@PN as the positive electrode(Mn@PN||AC)achieved an energy density of 328 Wh·kg^(-1) at 15 A·g^(-1) and retained 80.7%of its initial specific capacitance after 4000 cycles at 20 A·g^(-1).
基金financially supported by the National Natural Science Foundation of China(No.51962027,and 52262039)the Fundamental Research Funds for Inner Mongolia University of Science&Technology(No.2024QNJS071,2023QNJS052 and 2024QNJS064)+2 种基金the Program for Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(No.NJYT24002)the Central Guidance Fund for Local Scientific and Technological Development(2024ZY0012)the Ordos Higher Education Institutions Scientific Research Innovation Project(KYLJ25Z004)。
文摘The octahedral tunnel-like three-dimensional(3D)structure of V_(2)O_(3)enables fast metal ion(de)intercalation and high capacity in aqueous zinc-ion batteries(ZIBs),but suffers from phase transition-induced structural degradation and capacity fading.Herein,we demonstrate that the undesirable phase transition of V_(2)O_(3)can be effectively suppressed through a new La^(3+)doping strategy and its implementation as a robust ZIBs cathode.The introduced La^(3+)ions not only can increase cell volume and expand ion channels of V_(2)O_(3)but also offer plentiful Zn^(2+)storage sites and promote the transport of Zn^(2+)ions and electrons.In particular,the doping of La^(3+)maintains the octahedral tunnel structure of V_(2)O_(3)and prevents its phase transition during(dis)charge,which improves the cycle stability of the V_(2)O_(3)cathode in ZIBs.By virtue of the above favorable factors,La-doped V_(2)O_(3)electrode presents an impressive discharge capacity of632.1 m Ah g^(-1)at 0.1 A g^(-1)after 100 cycles with a capacity retention up to 93.1%.Even at 10 A g^(-1),its discharge capacity remains at 342.7 mAh g^(-1)after 1000 cycles with a capacity attenuation of solely0.0069%per cycle.This work establishes rare-earth cation doping as a universal paradigm to reconcile structural stability and multi-electron redox activity in high-capacity battery electrodes.
文摘Herein,3‑aminopropyltriethoxysilane(APTES)was used to modify F‑containing silica slag(SS)by simple grafting and served as a multifunctional barrier layer.The amino group(—NH2)in the amino‑modified SS(NH2‑SS)forms ligand bonds or hydrogen bonds with sulfur ions in lithium polysulfides(LiPSs),thus inhibiting the shuttle effect.Electrochemical analyses demonstrated that lithium‑sulfur(Li‑S)batteries employing the NH2‑SS interlayer exhibited discharge specific capacities of 1048 and 789 mAh·g^(-1) at 0.2C and 2C,respectively,and even at 4C,the initial discharge specific capacity remained at 590 mAh·g^(-1),outperforming the Li‑S battery with unmodified SS as the interlayer.
基金supported by Shandong Provincial Natural Science Foundation (No.ZR2022ME181)National Natural Science Foundation of China(No.51702123)funding from University of Jinan
文摘Capacitor-related energy storage devices with high power density,excellent cycle stability,wide operating temperature range,and environmental friendliness have enjoyed great popularity.However,the relatively poor energy density hinders their practical large-scale application.Electrospun carbon-based materials are ideal candidates owing to their large specific surface area(SSA),affluent porosity,high conductivity,good flexibility,and stable chemical properties.Therefore,this review provides the research progress of electrospun carbon-based materials for conventional and hybrid supercapacitors in recent years.First,the electrospinning technology is briefly introduced,and then the research progress of various electrospun carbon-based materials for conventional and hybrid supercapacitors is reviewed.Finally,the problems faced by electrospinning technology and developing electrospun carbon-based materials for conventional and hybrid supercapacitors are summarized and prospected.It is expected to provide some ideas for developing new high-performance electrospun carbon-based materials for conventional and hybrid supercapacitors.
文摘Lithium–sulfur(Li–S)batteries are promisingcandidates for next-generation energy storagegiven their high energy density and potential low cost.Chemically activated carbon(CAC)is often used fortheir cathodes,because it has a high specific surfacearea for sulfur loading.We have developed a pressurizedphysical activation(PPA)method that producedan activated carbon(PPAC)with a high specific surfacearea comparable to that of CAC.The pore structure of PPAC could be changed and its use as a cathode material for Li–Sbatteries was investigated.Battery tests at different capacity rates(C-rates)showed that it had a much improved high-rate performancewith a discharge capacity of 900 mAh/(g of sulfur)at 1 C,in contrast to only 600 mAh/(g of sulfur)for CAC.Porestructure analyses showed that PPAC prepared at a high activation temperature(1000℃)had unusual channel-like mesoporesbetween the microdomains that are the basic structural units of artificial carbon materials.These are connected to microporesdeveloped in each microdomain,and deliver ions from the surroundings to the internal pores and vice versa.The well-developedmicropores and mesopores of PPAC respectively ensured the high adsorption of lithium polysulfides and a high rate ofion diffusion.Compared to CAC,PPAC is a high-performance,low-cost cathode material that is promising for use in futureLi–S batteries.
基金financially supported by the National Natural Science Foundation of China(No.22309138)the Hubei Province Natural Science Foundation(No.2024AFB815)+1 种基金the Postdoctoral Project of Hubei Province(No.2024HBBHXF056)the Department of Science and Technology of Hubei Province(No.2025CSA001)。
文摘As a high-energy-density primary battery,the Li-SOCl_(2) battery offers significant advantages over other primary systems,including a high operating voltage,wide temperature tolerance,and low self-discharge rate.However,owing to the irreversible electrochemical reaction mechanism,despite its energy density of up to 700 Wh kg^(-1) at the cell level,this battery system has remained confined to the category of primary batteries,thereby limiting its use in cyclic applications.Recent advances in electrochemical technologies have enabled the reversible redox chemistry of Li-SOCl_(2) batteries,transforming them into rechargeable systems.This article provides a systematic overview of the technical evolution,reaction mechanisms,safety constraints,engineering countermeasures,and electrochemical performance enhancement of Li-SOCl_(2) primary batteries since their introduction.First,the modification methods for the lithium anode,carbon cathode,electrolyte,and electrocatalyst in Li-SOCl_(2) primary batteries are discussed,along with their mechanisms for improving electrochemical performance.We then review the SOCl_(2)-based rechargeable Li metal batteries(LMBs)that evolved from the Li-SOCl_(2) primary batteries.With their higher energy density,these systems have become promising candidates to replace traditional Li-ion batteries(LIBs).This review focuses on the construction of key components,such as the positive electrode carrier,novel alloy anode,and electrolyte,as well as their impact on electrochemical performance in rechargeable batteries.Finally,we summarize current research progress and propose future directions for SOCl_(2)-based LMBs aimed at enhancing overall electrochemical performance.These insights provide a theoretical foundation for the development of next-generation high-energy-density energy-storage technologies.
基金supported by the University of Seoul’s 2025 Research Fund.
文摘Vanadium redox flow batteries(VRFBs)are a means of large-scale energy storage due to their excellent scalability,safety,long cycling life,and decoupled power and energy capacities.However,the slow redox kinetics of vanadium species on conventional carbon electrodes remains a major limitation to their performance.We investigated the deposition of carbon black,carbon nanotubes,and electrochemically exfoliated graphene(Exf-Gr)onto thermally-activated carbon paper(ACP)by spray coating to increase the electrode electrocatalytic activity.The modified electrodes were characterized using scanning electron microscopy,X-ray diffraction,Raman spectroscopy,X-ray photoelectron microscopy,and surface area analysis,while their electrochemical properties were evaluated by cyclic voltammetry,electrochemical impedance spectroscopy,and singlecell VRFB testing.Among the modified electrodes,Exf-Gr/ACP had the best performance,achieving a 2.9-fold reduction in charge transfer resistance compared to pristine ACP and delivering 2.5 times the discharge capacity in single-cell tests.This improvement is attributed to Exf-Gr’s high surface area,favorable catalytic activity,and excellent dispersion on the ACP substrate.Surface modification with electrochemically exfoliated graphene is a highly effective strategy for improving the electrode performance in VRFB systems,with significant implications for large-scale energy storage.
基金supported by the Beijing Natural Science Foundation(L243019)the National Natural Science Foundation of China(22393900,22393904)+3 种基金the National Key Research and Development Program(2021YFB2500300)the JBGS project from Ordos(JBGS2024001)the Tsinghua University Initiative Scientific Research Programthe“Shuimu Tsinghua Scholar Program of Tsinghua University”。
文摘1.Introduction Driven by the growing demand for energy storage systems in portable electronic devices,electric vehicles,and unmanned aerial vehicles,lithium-ion batteries(LIBs)have received considerable and sustained attention.The performance of routine LIBs is approaching the ceiling,particularly in terms of energy density,making it difficult to meet the ever-increasing demand for energy density[1].
文摘Despite their high theoretical capacity and energy density,lithiumsulfur(Li–S)batteries still face challenges such as soluble lithium polysulfides(LiPSs)shuttling and sluggish redox kinetics.In this work,we used a novel MoS_(2)-Mo_(2)C heterostructure anchored on a carbon sponge(CS)as a Li_(2)S host to solve these problems.A simple hydrothermal process following carbothermal reduction was used to construct the MoS_(2)-Mo_(2)C heterostructure,enabling control of the phases and integration of MoS_(2) and Mo_(2)C.Structural characterization confirmed the coherent interface of the heterostructure with a precise orientation relationship between the two phases and their uniform distribution.An evaluation of the adsorption and catalytic performance of the material showed that it has an exceptional LiPSs adsorption capacity with faster conversion from Li_(2)S_(4) to Li_(2)S_(2).Density functional theory calculations further confirmed these results.As a result,the cathode had a high initial discharge capacity of 693 mAh g^(−1) at 0.2 C and achieved stable cycling at 2 C for 500 cycles with a low decay rate of 0.107%per cycle.The heterostructure design,coupled with the macroporous CS framework,effectively prevented the shuttling and increased sulfur utilization,offering a promising way to produce practical high-energydensity Li–S batteries.
基金supported by Shenzhen Science and Technology Program(No.JCYJ20240813103608012)State Key Laboratory of New Textile Materials andAdvanced Processing Technologies(No.FZ2024019)National Natural Science Foundation of China(No.22104117).
文摘Nowadays,higher requirements are put forward to the storage and utilization of energy,and supercapacitor is a kind of energy storage electronic devices.The resulting CA-N,with a specific surface area of 320.6 m^(2)/g and a pore volume of 0.28 cm^(3)/g,demonstrated a remarkable supercapacitance of 283.3 F/g.As a mesoporous material,CA-N offers numerous channels for the diffusion and absorption of electrolyte ions.Furthermore,it exhibited an impressive capacity retention rate of 98.48% after 5000 charge-discharge cycles.These outstanding electrochemical properties highlight the potential of CA-N for applications in energy storage.
基金supported by the National Natural Science Foundation of China(Nos.52072208 and 52261160384)supported by the Postdoctoral Fellowship Program(Grade B)of China Postdoctoral Science Foundation under Grant Number GZB20250057China Postdoctoral Science Foundation(2025M770223).
文摘With the growing global energy demand and the pressing need for a clean energy transition,supercapacitors(SCs)have demonstrated significant application potential in electric vehicles,wearable electronics,and renewable energy storage systems owing to their rapid charge-discharge capability,exceptional power density,and prolonged cycle life.The improvement of their overall performance fundamentally depends on the synergistic design of electrode materials and electrolyte systems,as well as the precise regulation of the electrode-electrolyte interface.This review focuses on the key components of supercapacitors,systematically reviewing the design strategies of high-performance electrode materials,outlining recent advances in novel electrolyte systems,and comprehensively discussing the critical roles of interfacial reinforcement and optimization in enhancing device energy density,power performance,and cycling stability.Furthermore,interfacial engineering strategies and innovations in device architecture are proposed to address interfacial degradation in flexible SCs under mechanical stress.Finally,key future research directions are highlighted,including the development of high-voltage and wide-temperature-range electrolyte systems and the integrated advancement of multiscale in situ characterization techniques and theoretical modeling.This review aims to provide theoretical guidance and innovative strategies for material design,contributing toward the realization of next-generation supercapacitors with enhanced energy density and reliability.
文摘Understanding how aging influences the thermal hazards of lithium-ion batteries(LIBs)is critical for enhancing their safety across a wide range of applications.This study systematically investigates the thermal runaway(TR)behavior of LIBs,with particular emphasis on combined-pathway aging,evaluated in terms of normalized usable capacity(U_(E)).Key thermal safety parameters,i.e.,TR triggering temperature,mass loss,and heat generation under diverse aging conditions,are quantified.To enable a fair comparison,thermal hazards are evaluated based on equivalent usable capacity,revealing that aged cells exhibit lower TR triggering temperatures and higher heat generation than fresh cells under thermal abuse with elevated thermal risks.Mechanistic analysis identifies lithium plating,solid electrolyte interphase(SEI)formation,and lithium depletion,particularly under high-temperature charging,as the dominant contributors to increased hazard.Using an aging-stressor matrix,a trade-off between high-C-rateinduced thermal instability and high-temperature-induced thermal stability is discovered and quantified,underscoring the strong dependence of thermal hazards on specific aging pathways.This work advances the fundamental understanding of aging-induced safety risks in LIBs and offers practical guidance for the development of safer battery systems,optimized charging protocols,and improved battery management strategies across applications in electric vehicles,consumer electronics,and grid-scale energy storage.
基金supported by the grant of State Key Laboratory of Space Environment Interaction with Matters,the Science and Technology on Vacuum Technology and Physics Laboratory Fund(HTKJ2023KL510008)Key Program of the National Natural Science Foundation of China(No.62433017)+6 种基金the National Natural Science Foundation of China(No.62274140)the Fundamental Research Funds for the Central Universities(20720230030)the Xiaomi Young Talents Program/Xiaomi Foundation,Shenzhen Science and Technology Program(JCYJ20230807091401003)the Young Elite Scientist Sponsorship Program by Cast(No.YESS20230523)the State Key Laboratory of Space Environment Interaction with Matters(WDZC-HGD-2022-08)the Gansu Provincial Science and Technology Major Project(2244ZZDD1133GGAA000077)the China Aerospace Science and Technology Group Corporation Young Top Talents.
文摘With the widespread application of lithium batteries in electric vehicles and energy storage systems,battery-related safety and reliability issues have become increasingly prominent.Conventional monitoring methods often struggle to address dynamic changes under complex operando.In recent years,flexible sensing technology has emerged as a promising solution for battery health monitoring due to its high adaptability and conformability to complex structures.Meanwhile,empowered by artificial intelligence(AI)for data analysis,the collected data enables efficient and accurate state assessment,offering robust support for accident prevention.Against this background,this paper first explores the integrated applications of flexible sensors in battery health monitoring and their unique advantages in addressing complex battery operating conditions,while analyzing the potential of AI in battery state analysis.Subsequently,it systematically reviews mainstream flexible sensing technologies(e.g.,film sensors,thermocouples,and optical fiber sensors),elucidating their mechanisms for revealing intricate internal battery processes during operation.Finally,the paper discusses AI’s role in enhancing monitoring efficiency and accuracy,and envisions future research directions and application prospects.This work aims to provide technical references for the battery health monitoring field as well as promote the application of flexible sensing technologies in improving battery system safety and reliability.
基金support by NSFC(No.61704047)Natural Science Foundation of Henan Province(No.242300420271)Key Research Project of Henan Provincial Higher Education(No.24A430008).
文摘Zeolite imidazolate framework(ZIF)-derived bimetallic sulfides and layered double hydroxides(LDHs)have emerged as promising electrode materials for supercapacitors,owing to their porous layered structures,high electrochemical activity,tun-able molecular architectures,low cost,and high specific capacitance.In this study,a unique composite material comprising ZIF-derived ZnCo bimetallic sulfide and LDH with a honeycomb-like structure was in situ grown on nickel foil(NF)via a con-trolled self-sacrificial template strategy.In contrast to previous reports,the resulting ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF compos-ite integrates the advantages of MXene,LDH,and sulfides,leading to significantly enhanced conductivity,structural stability,and catalytic activity.The ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF electrode exhibits a uniform network structure with a thickness of approximately 1μm coated on NF,and delivers a high specific capacitance of 1356.1 F·g^(-1)at a current density of 2 A·g^(-1).Further-more,an asymmetric supercapacitor assembled with ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF as the positive electrode and activated car-bon as the negative electrode achieves a high energy density of 34.08 Wh·kg^(-1)and a power density of 742.3 W·kg^(-1)at 1 A·g^(-1).This device successfully powers LED lights for 5 min,demonstrating its practical applicability.These results underscore the out-standing electrochemical performance of the ZnS@Co_(3)S_(4)@MXene@Ni-LDH/NF electrode,highlighting its potential for applica-tions in supercapacitors and related energy storage fields.
