Photoelectrocatalytic(PEC)seawater splitting as a green and sustainable route to harvest hydrogen is attractive yet hampered by low activity of photoanodes and unexpected high selectivity to the corrosive and toxic ch...Photoelectrocatalytic(PEC)seawater splitting as a green and sustainable route to harvest hydrogen is attractive yet hampered by low activity of photoanodes and unexpected high selectivity to the corrosive and toxic chlorine.Especially,it is full of challenges to unveil the key factors influencing the selectivity of such complex PEC processes.Herein,by regulating the energy band and surface structure of the anatase TiO_(2) nanotube array photoanode via nitrogen-doping,the seawater PEC oxidation shifts from Cl^(-)oxidation reaction(ClOR)dominant on the TiO_(2) photoanode(61.6%)to oxygen evolution reaction(OER)dominant on the N-TiO_(2) photoanode(62.9%).Comprehensive investigations including operando photoelectrochemical FTIR and DFT calculations unveil that the asymmetric hydrogen-bonding water at the N-TiO_(2) electrode/electrolyte interface enriches under illumination,facilitating proton transfer and moderate adsorption strength of oxygen-intermediates,which lowers the energy barrier for the OER yet elevates the energy barrier for the ClOR,resulting to a promoted selectivity towards the OER.The work sheds light on the underlying mechanism of the PEC water oxidation processes,and highlights the crucial role of interfacial water on the PEC selectivity,which could be regulated by controlling the energy band and the surface structure of semiconductors.展开更多
The effect of sintering dispersed and bulk,low molecular weight(M_n=50,000 Da),nano-emulsionpolytetrafluoroethylene(PTFE)particles near their melting point is described.With the nascent particles consisting of ca.75 n...The effect of sintering dispersed and bulk,low molecular weight(M_n=50,000 Da),nano-emulsionpolytetrafluoroethylene(PTFE)particles near their melting point is described.With the nascent particles consisting of ca.75 nm diameter,hexagonal,single crystals,sintering at,e.g.,350℃,results,initially,in merger of neighboring particles,followed by individual molecular motion on the substrate and the formation of folded chain,lamellar single crystals andspherulites,and on-edge ribbons.It is suggested these structures develop,with time,in the mesomorphic“melt”.Sintering ofthe bulk resin yields extended chain,band structures,as well as folded chain lamellae;end-surface to end-surface merger,possibly by end-to-end polymerization,occurs with increasing time.展开更多
Dissimilar friction stir welding（FSW） between aluminum and magnesium alloy was performed, using various tool rotational speed（TRS） at a ？xed travel speed, with tool offset to aluminum to investigate the formation...Dissimilar friction stir welding（FSW） between aluminum and magnesium alloy was performed, using various tool rotational speed（TRS） at a ？xed travel speed, with tool offset to aluminum to investigate the formation of intermetallic compounds（IMCs） in the banded structure（BS） zone and their effect on mechanical properties. Large quantities of IMCs, in the form of alternating bands of particles or lamellae, were found in the BS zone, where drastic material intermixing occurred during FSW. The BS microstructural characters in terms of the morphology of the bands and the quantity and distribution of IMC particles varied with TRS. All welds exhibited brittle fracture mode with their fracture paths propagating mainly in/along the IMCs in the BS. It is shown that these BS microstructural characters have significant effect on the mechanical properties of the joints. Suggestions on tailoring the BS microstructure were proposed for improving the strength of the BS zone and the final mechanical properties of the Al/Mg FSW joints.展开更多
The effect of Cr/Mn segregation on the abnormal banded structure of high carbon bearing steel was studied by reheating and hot rolling.With the use of an optical microscope, scanning electron microscope, transmission ...The effect of Cr/Mn segregation on the abnormal banded structure of high carbon bearing steel was studied by reheating and hot rolling.With the use of an optical microscope, scanning electron microscope, transmission electron microscope, and electron probe microanalyzer, the segregation characteristics of alloying elements in cast billet and their relationship with hot-rolled plate banded structure were revealed.The formation causes of an abnormal banded structure and the elimination methods were analyzed.Results indicate the serious positive segregation of C, Cr, and Mn alloy elements in the billet.Even distribution of Cr/Mn elements could not be achieved after 10 h of heat preservation at 1200℃, and the spacing of the element aggregation area increased, but the segregation index of alloy elements decreased.Obvious alloying element segregation characteristics are present in the banded structure of the hot-rolled plate.This distinct white band is composed of martensitic phases.The formation of this abnormal pearlite–martensite banded structure is due to the interaction between the undercooled austenite transformation behavior of hot-rolled metal and the segregation of its alloying elements.Under the air cooling after rolling, controlling the segregation index of alloy elements can reduce or eliminate the abnormal banded structure.展开更多
This study on the band structures and charge densities of nitrogen (N)-, carbon (C)- and boron (B)-doped titanium dioxide (TiO2) by first-principles simulation with the CASTEP code (Segall et al., 2002) showed that th...This study on the band structures and charge densities of nitrogen (N)-, carbon (C)- and boron (B)-doped titanium dioxide (TiO2) by first-principles simulation with the CASTEP code (Segall et al., 2002) showed that the three 2p bands of im-purity atom are located above the valence-band maximum and below the Ti 3d bands, and that along with the decreasing of im-purity atomic number, the fluctuations become more intensive. We cannot observe obvious band-gap narrowing in our result. Therefore, the cause of absorption in visible light might be the isolated impurity atom 2p states in band-gap rather than the band-gap narrowing.展开更多
Metal halide perovskite nanostructures have emerged as low-dimensional semiconductors of great significance in many fields such as photovoltaics,photonics,and optoelectronics.Extensive efforts on the controlled synthe...Metal halide perovskite nanostructures have emerged as low-dimensional semiconductors of great significance in many fields such as photovoltaics,photonics,and optoelectronics.Extensive efforts on the controlled synthesis of perovskite nanostructures have been made towards potential device applications.The engineering of their band structures holds great promise in the rational tuning of the electronic and optical properties of perovskite nanostructures,which is one of the keys to achieving efficient and multifunctional optoelectronic devices.In this article,we summarize recent advances in band structure engineering of perovskite nanostructures.A survey of bandgap engineering of nanostructured perovskites is firstly presented from the aspects of dimensionality tailoring,compositional substitution,phase segregation and transition,as well as strain and pressure stimuli.The strategies of electronic doping are then reviewed,including defect-induced self-doping,inorganic or organic molecules-based chemical doping,and modification by metal ions or nanostructures.Based on the bandgap engineering and electronic doping,discussions on engineering energy band alignments in perovskite nanostructures are provided for building high-performance perovskite p-n junctions and heterostructures.At last,we provide our perspectives in engineering band structures of perovskite nanostructures towards future low-energy optoelectronics technologies.展开更多
ZnS nanostructures with different dimensions and structure-related properties were reviewed in this paper. The crystallization of nanostructures from 0D, 1D to 3D, as well as the heterogonous counterparts, was sum- ma...ZnS nanostructures with different dimensions and structure-related properties were reviewed in this paper. The crystallization of nanostructures from 0D, 1D to 3D, as well as the heterogonous counterparts, was sum- marized in the aspect of zinc blende, wurtzite structure, and their combinations. Furthermore, the structure-related energy bands and the corresponding photoelectric properties of ZnS nanostructures were also focused, in which we made a brief summary of the co-relations between photoluminescence and crystallography, especially the defectrelated luminescence properties of ZnS nanocrystal.展开更多
A radial basis function collocation method based on the nonlocal elastic continuum theory is developed to compute the band structures of nanoscale multilayered phononic crystals. The effects of nonlocal imperfect inte...A radial basis function collocation method based on the nonlocal elastic continuum theory is developed to compute the band structures of nanoscale multilayered phononic crystals. The effects of nonlocal imperfect interfaces on band structures of transverse waves propagating obliquely or vertically in the system are studied. The correctness of the present method is verified by comparing the numerical results with those obtained by applying the transfer matrix method in the case of nonlocal perfect interface. Furthermore, the influences of the nanoscale size, the impedance ratio and the incident angle on the cut-off frequency and band structures are investigated and discussed in detail. Numerical results show that the nonlocal interface imperfections have significant effects on the band structures in the macroscopic and microscopic scale.展开更多
A new intermetallic compound,YbCu6In6,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-cryst...A new intermetallic compound,YbCu6In6,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-crystal X-ray diffraction.YbCu6In6 crystallizes in tetragonal space group I4/mmm with a = 9.2283（5）,c = 5.4015（4）,V = 460.00（5） 3,Z = 2,Mr = 1243.20,Dc = 8.976 g/cm3,μ = 38.243 mm-1,F（000） = 1076,and the final R = 0.0258 and wR = 0.0602 for 173 observed reflections with I 〉 2σ（I）.The structure of YbCu6In6 belongs to the ThMn12 type.It is isostructural with RECu6In6（RE = Y,Ce,Pr,Nd,Gd,Tb,Dy）,containing one-dimensional（1D） [Cu10In6] cluster chain along the c axis,which is interconnected via sharing the Cu（1） atoms to form a three-dimensional（3D） [Cu6In6] framework with Yb atoms encapsulated in the 1D tunnels along the c axis.Band structure calculations based on Density Functional Theory（DFT） method indicate that YbCu6In6 is metallic.展开更多
The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum ...The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.展开更多
SnTe has received considerable attention as an environmentally friendly alternative to the representative thermoelectric material of PbTe.However,excessive hole carrier concentration in SnTe results in an extremely lo...SnTe has received considerable attention as an environmentally friendly alternative to the representative thermoelectric material of PbTe.However,excessive hole carrier concentration in SnTe results in an extremely low Seebeck coefficient and high thermal conductivity,which makes it exhibit relatively inferior thermoelectric properties.In this work,the thermoelectric performance of p-type SnTe is enhanced through regulating its energy band structures and reducing its electronic thermal conductivity by combining Bi doping with CdSe alloying.First,the carrier concentration of SnTe is successfully suppressed via Bi doping,which significantly decreases the electronic thermal conductivity.Then,the convergence and flattening of the valence bands by alloying CdSe effectively improves the effective mass of SnTe while restraining its carrier mobility.Finally,a maximum figure of merit(ZT) of~ 0.87 at 823 K and an average ZT of~ 0.51 at 300-823 K have been achieved in Sn_(0.96)Bi_(0.04)Te-5%CdSe.Our results indicate that decreasing the electronic thermal conductivity is an effective means of improving the performance of thermoelectric materials with a high carrier concentration.展开更多
First-principles calculations have been performed to investigate the ground state electronic properties of BaFeO3 （BFO）. Local spin density approximation （LSDA） plus U （LSDA＋U） treatment modified the metallic b...First-principles calculations have been performed to investigate the ground state electronic properties of BaFeO3 （BFO）. Local spin density approximation （LSDA） plus U （LSDA＋U） treatment modified the metallic behaviour to insulated one with a band gap of 4.12eV. The spontaneous polarization was found to be 89.3μC/cm^2 with Berry phase scheme in terms of the modern theory of polarization. Fe-3d eg were split into two singlet states （dz2 and dx2-v2）, and Fe-3d t2g were split into one doublet states（dze and dyz） and one singlet states（dzy） after Fe and O displaced along the c axis. Meanwhile the occupation numbers of dx2, dxz, dyz and OT pz （on the top of Fe） were increased at the expense of those in xy plane. Our results showed that it was the sensitivity of hybridization to ferroelectric distortions, not just the total change of hybridization, that produced the possibility of ferroelectricity. Moreover, the increasing occupation numbers of OT pz and Fe dz2 favoured the 180° coupling between Fe-3d eg and Fe-3d t2g, leading to ferromagnetic ordering, which has been confirmed by the increase of magnetic moment by 0.13μB per formula unit in the polarized direction. Hence, the magnetization can be altered by the reversal of external electric field.展开更多
Quasiparticle band structures of the defective anatase TiO2 bulk with O vacancy, Ti interstitial and H interstitial are investigated by the GW method within many-body Green＇s function theory. The computed direct band...Quasiparticle band structures of the defective anatase TiO2 bulk with O vacancy, Ti interstitial and H interstitial are investigated by the GW method within many-body Green＇s function theory. The computed direct band gap of the perfect anatase bulk is 4.3 eV, far larger than the experimental optical absorption edge （3.2 eV）. We found that this can be ascribed to the inherent defects in anatase which drag the conduction band （CB） edge down. The occupied band-gap states induced by these defects locate close to the CB edge, exclud- ing the possible contribution of these bulk defects to the deep band-gap state below CB as observed in experiments.展开更多
Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and ...Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and radiation patterns.When the EBG cells were placed closer to the edge of the substrate,the EBG antenna had a larger front radiation and a narrower bandwidth.Integrating the EBG cells closer to the center of the patch resulted in a wider impedance bandwidth,a wider axial ratio bandwidth and a decreased front gain.展开更多
Band structure and bonding properties have been investigated in terms of periodic density functional theory（DFT） method,and two-photon absorption（TPA） spectra have been simulated by two-band model for ZnGeP2 and A...Band structure and bonding properties have been investigated in terms of periodic density functional theory（DFT） method,and two-photon absorption（TPA） spectra have been simulated by two-band model for ZnGeP2 and AgGaS2 crystals.It has been predicted that the AgGaS2 crystal has a wider window of nonlinear transmission,and the laser pumping energy larger than 1.02 and 1.35 eV will lead to deleterious TPA of higher nonlinear effect for ZnGeP2 and AgGaS2 crystals,respectively.Electron origin of TPA for them is also discussed.展开更多
By means of the network equation and generalized dimensionless Floquet-Bloch theorem, this paper investigates the properties of the band number and width for quadrangular multiconnected networks （QMNs） with a differ...By means of the network equation and generalized dimensionless Floquet-Bloch theorem, this paper investigates the properties of the band number and width for quadrangular multiconnected networks （QMNs） with a different number of connected waveguide segments （NCWSs） and various matching ratio of waveguide length （MRWL）. It is found that all photonic bands are wide bands when the MRWL is integer. If the integer attribute of MRWL is broken, narrow bands will be created from the wide band near the centre of band structure. For two-segment-connected networks and three-segment-connected networks, it obtains a series of formulae of the band number and width. On the other hand, it proposes a so-called concept of two-segment-connected quantum subsystem and uses it to discuss the complexity of the band structures of QMNs. Based on these formulae, one can dominate the number, width and position of photonic bands within designed frequencies by adjusting the NCWS and MRWL. There would be potential applications for designing optical switches, optical narrow-band filters, dense wavelength-division-multiplexing devices and other correlative waveguide network devices.展开更多
Artificially constructed van der Waals heterostructures(vdWHs)provide an ideal platform for realizing emerging quantum phenomena in condensed matter physics.Two methods for building vdWHs have been developed:stacking ...Artificially constructed van der Waals heterostructures(vdWHs)provide an ideal platform for realizing emerging quantum phenomena in condensed matter physics.Two methods for building vdWHs have been developed:stacking two-dimensional(2D)materials into a bilayer structure with different lattice constants,or with different orientations.The interlayer coupling stemming from commensurate or incommensurate superlattice pattern plays an important role in vdWHs for modulating the band structures and generating new electronic states.In this article,we review a series of novel quantum states discovered in two model vdWH systems—graphene/hexagonal boron nitride(hBN)hetero-bilayer and twisted bilayer graphene(tBLG),and discuss how the electronic structures are modified by such stacking and twisting.We also provide perspectives for future studies on hetero-bilayer materials,from which an expansion of 2D material phase library is expected.展开更多
Banded structure is a common harmful microstructure for low carbon microalloyed steel,which seriously shortens the service life of processed parts.In order to study the effect of oxide metallurgy on improving banded s...Banded structure is a common harmful microstructure for low carbon microalloyed steel,which seriously shortens the service life of processed parts.In order to study the effect of oxide metallurgy on improving banded structure,the Ti-Zr deoxidized low carbon microalloyed steel that can play the oxide metallurgical role of inclusion was chosen as the research object,and the inclusion characteristics,microstructure and transverse and longitudinal mechanical properties after hot rolling were analyzed.The results showed the inclusion number density increased in all experimental steels after hot rolling,and a large number of long strip inclusions with aspect ratio greater than 3 appeared along the rolling direction.In addition,after hot rolling,there were element segregation bands in the experimental steels,and granular bainite bands were formed in the element enrichment zone.However,the intragranular ferrite generated in the cooling process destroyed the continuity of granular bainite bands,so that the microstructure anisotropy indexes of experimental steels were small.The mechanical properties analysis showed that the anisotropy of performance was mainly reflected in plasticity and toughness in the experimental steels.Among them,the difference ratio of elongation,section shrinkage and impact energy of No.2 steel was 1.69%,3.87% and 1.69%,respectively,which were less than those of No.1 steel and No.3 steel.The anisotropy of microstructure and mechanical properties of No.2 steel that full played the role of oxide metallurgy were improved,and the banded structure control of low carbon microalloyed steel can be realized by oxide metallurgy technology.展开更多
We adopt the density function theory with generalized approximation by the Beeke exchange plus Lee-Yang-Parr correlation functional to calculate the electronic first-principles band structure of tin-phthalocyanine （S...We adopt the density function theory with generalized approximation by the Beeke exchange plus Lee-Yang-Parr correlation functional to calculate the electronic first-principles band structure of tin-phthalocyanine （SnPc）. The intermolecular interaction related to transport behavior was analyzed from the F-point wave function as well as from the bandwidths and band gaps. From the calculated bandwidths of the frontier bands as well as the effective masses of the electron and hole, it can be concluded that the mobility of the electron is about two times larger than that of the hole. Furthermore, when several bands near the Fermi surface are taken into account, we find that the interband gaps within the unoccupied bands are generally smaller than those of the occupied bands, indicating that the electron can hop from one band to another which is much easier than the hole. This may happen through electron-phonon coupling for instance, thus effectively yielding an even larger mobility for the electron than for the hole. These facts indicate that in SnPc the electrons are the dominant carriers in transport, in contrast to most organic materials.展开更多
文摘Photoelectrocatalytic(PEC)seawater splitting as a green and sustainable route to harvest hydrogen is attractive yet hampered by low activity of photoanodes and unexpected high selectivity to the corrosive and toxic chlorine.Especially,it is full of challenges to unveil the key factors influencing the selectivity of such complex PEC processes.Herein,by regulating the energy band and surface structure of the anatase TiO_(2) nanotube array photoanode via nitrogen-doping,the seawater PEC oxidation shifts from Cl^(-)oxidation reaction(ClOR)dominant on the TiO_(2) photoanode(61.6%)to oxygen evolution reaction(OER)dominant on the N-TiO_(2) photoanode(62.9%).Comprehensive investigations including operando photoelectrochemical FTIR and DFT calculations unveil that the asymmetric hydrogen-bonding water at the N-TiO_(2) electrode/electrolyte interface enriches under illumination,facilitating proton transfer and moderate adsorption strength of oxygen-intermediates,which lowers the energy barrier for the OER yet elevates the energy barrier for the ClOR,resulting to a promoted selectivity towards the OER.The work sheds light on the underlying mechanism of the PEC water oxidation processes,and highlights the crucial role of interfacial water on the PEC selectivity,which could be regulated by controlling the energy band and the surface structure of semiconductors.
文摘The effect of sintering dispersed and bulk,low molecular weight(M_n=50,000 Da),nano-emulsionpolytetrafluoroethylene(PTFE)particles near their melting point is described.With the nascent particles consisting of ca.75 nm diameter,hexagonal,single crystals,sintering at,e.g.,350℃,results,initially,in merger of neighboring particles,followed by individual molecular motion on the substrate and the formation of folded chain,lamellar single crystals andspherulites,and on-edge ribbons.It is suggested these structures develop,with time,in the mesomorphic“melt”.Sintering ofthe bulk resin yields extended chain,band structures,as well as folded chain lamellae;end-surface to end-surface merger,possibly by end-to-end polymerization,occurs with increasing time.
基金supported by the National Natural Science Foundation of China(Grant No.51204108)the National Research Foundation for Doctoral Program of Higher Education of China(Grant No.20120073120120)+1 种基金the Shanghai Committee of Science and Technology(Grant No.11ZR1418100)the Research Foundation of Shanghai Academy of Spaceflight Technology-Shanghai Jiao Tong University Joint Research Center for Advanced Spaceflight Technology(Grant No.USCAST2012-12)
文摘Dissimilar friction stir welding（FSW） between aluminum and magnesium alloy was performed, using various tool rotational speed（TRS） at a ？xed travel speed, with tool offset to aluminum to investigate the formation of intermetallic compounds（IMCs） in the banded structure（BS） zone and their effect on mechanical properties. Large quantities of IMCs, in the form of alternating bands of particles or lamellae, were found in the BS zone, where drastic material intermixing occurred during FSW. The BS microstructural characters in terms of the morphology of the bands and the quantity and distribution of IMC particles varied with TRS. All welds exhibited brittle fracture mode with their fracture paths propagating mainly in/along the IMCs in the BS. It is shown that these BS microstructural characters have significant effect on the mechanical properties of the joints. Suggestions on tailoring the BS microstructure were proposed for improving the strength of the BS zone and the final mechanical properties of the Al/Mg FSW joints.
文摘The effect of Cr/Mn segregation on the abnormal banded structure of high carbon bearing steel was studied by reheating and hot rolling.With the use of an optical microscope, scanning electron microscope, transmission electron microscope, and electron probe microanalyzer, the segregation characteristics of alloying elements in cast billet and their relationship with hot-rolled plate banded structure were revealed.The formation causes of an abnormal banded structure and the elimination methods were analyzed.Results indicate the serious positive segregation of C, Cr, and Mn alloy elements in the billet.Even distribution of Cr/Mn elements could not be achieved after 10 h of heat preservation at 1200℃, and the spacing of the element aggregation area increased, but the segregation index of alloy elements decreased.Obvious alloying element segregation characteristics are present in the banded structure of the hot-rolled plate.This distinct white band is composed of martensitic phases.The formation of this abnormal pearlite–martensite banded structure is due to the interaction between the undercooled austenite transformation behavior of hot-rolled metal and the segregation of its alloying elements.Under the air cooling after rolling, controlling the segregation index of alloy elements can reduce or eliminate the abnormal banded structure.
基金Project (No. 2004AA32G040) supported by the Hi-Tech Researchand Development Program (863) of China
文摘This study on the band structures and charge densities of nitrogen (N)-, carbon (C)- and boron (B)-doped titanium dioxide (TiO2) by first-principles simulation with the CASTEP code (Segall et al., 2002) showed that the three 2p bands of im-purity atom are located above the valence-band maximum and below the Ti 3d bands, and that along with the decreasing of im-purity atomic number, the fluctuations become more intensive. We cannot observe obvious band-gap narrowing in our result. Therefore, the cause of absorption in visible light might be the isolated impurity atom 2p states in band-gap rather than the band-gap narrowing.
基金support from Australian Research Council (ARC, FT150100450, IH150100006 and CE170100039)support from the MCATM and the FLEET+1 种基金the support from Shenzhen Nanshan District Pilotage Team Program (LHTD20170006)support from Guangzhou Science and Technology Program (Grant No. 201804010322)
文摘Metal halide perovskite nanostructures have emerged as low-dimensional semiconductors of great significance in many fields such as photovoltaics,photonics,and optoelectronics.Extensive efforts on the controlled synthesis of perovskite nanostructures have been made towards potential device applications.The engineering of their band structures holds great promise in the rational tuning of the electronic and optical properties of perovskite nanostructures,which is one of the keys to achieving efficient and multifunctional optoelectronic devices.In this article,we summarize recent advances in band structure engineering of perovskite nanostructures.A survey of bandgap engineering of nanostructured perovskites is firstly presented from the aspects of dimensionality tailoring,compositional substitution,phase segregation and transition,as well as strain and pressure stimuli.The strategies of electronic doping are then reviewed,including defect-induced self-doping,inorganic or organic molecules-based chemical doping,and modification by metal ions or nanostructures.Based on the bandgap engineering and electronic doping,discussions on engineering energy band alignments in perovskite nanostructures are provided for building high-performance perovskite p-n junctions and heterostructures.At last,we provide our perspectives in engineering band structures of perovskite nanostructures towards future low-energy optoelectronics technologies.
基金financially supported by the National Natural Science Foundation of China(Nos.11174023,51371015,and 11304209)Beijing Municipal Research Project for Outstanding Doctoral Thesis Supervisors(No.20121000603)
文摘ZnS nanostructures with different dimensions and structure-related properties were reviewed in this paper. The crystallization of nanostructures from 0D, 1D to 3D, as well as the heterogonous counterparts, was sum- marized in the aspect of zinc blende, wurtzite structure, and their combinations. Furthermore, the structure-related energy bands and the corresponding photoelectric properties of ZnS nanostructures were also focused, in which we made a brief summary of the co-relations between photoluminescence and crystallography, especially the defectrelated luminescence properties of ZnS nanocrystal.
基金supports by the National Natural Science Foundation of China (Grants 11002026, 11372039)the Beijing Natural Science Foundation (Grant 3133039)the Scientific Research Foundation for the Returned (Grant 20121832001)
文摘A radial basis function collocation method based on the nonlocal elastic continuum theory is developed to compute the band structures of nanoscale multilayered phononic crystals. The effects of nonlocal imperfect interfaces on band structures of transverse waves propagating obliquely or vertically in the system are studied. The correctness of the present method is verified by comparing the numerical results with those obtained by applying the transfer matrix method in the case of nonlocal perfect interface. Furthermore, the influences of the nanoscale size, the impedance ratio and the incident angle on the cut-off frequency and band structures are investigated and discussed in detail. Numerical results show that the nonlocal interface imperfections have significant effects on the band structures in the macroscopic and microscopic scale.
基金Supported by the National Natural Science Foundation of China (No. 21101075)the research foundation for excellent young and middle-aged scientists of Shandong Province (No. BS2011CL009)+2 种基金the Science & Research Program foundation of high education of Shandong Province (No. J11LB52)the Rehearsal National Foundation of Jining University (Nos. 2011YYJJ06 and 2011YYJJ07)the Youths Science Foundation of Jining University (No. 2011QNKJ07)
文摘A new intermetallic compound,YbCu6In6,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-crystal X-ray diffraction.YbCu6In6 crystallizes in tetragonal space group I4/mmm with a = 9.2283（5）,c = 5.4015（4）,V = 460.00（5） 3,Z = 2,Mr = 1243.20,Dc = 8.976 g/cm3,μ = 38.243 mm-1,F（000） = 1076,and the final R = 0.0258 and wR = 0.0602 for 173 observed reflections with I 〉 2σ（I）.The structure of YbCu6In6 belongs to the ThMn12 type.It is isostructural with RECu6In6（RE = Y,Ce,Pr,Nd,Gd,Tb,Dy）,containing one-dimensional（1D） [Cu10In6] cluster chain along the c axis,which is interconnected via sharing the Cu（1） atoms to form a three-dimensional（3D） [Cu6In6] framework with Yb atoms encapsulated in the 1D tunnels along the c axis.Band structure calculations based on Density Functional Theory（DFT） method indicate that YbCu6In6 is metallic.
文摘The performance of the photodetector is significantly impacted by the inherent surface faults in GaAs nanowires(NWs).We combined three-dimensional(3D)gallium arsenide nanowires with zero-dimensional(0D)WS_(2) quantum dot(QDs)materials in a simple and convenient way to form a heterogeneous structure.Various performance enhancements have been realized through the formation of typeⅡenergy bands in heterostructures,opening up new research directions for the future development of photodetector devices.This work successfully fabricated a high-sensitivity photodetector based on WS_(2)QDs/GaAs NWs heterostructure.Under 660 nm laser excitation,the photodetector exhibits a responsivity of 368.07 A/W,a detectivity of 2.7×10^(12)Jones,an external quantum efficiency of 6.47×10^(2)%,a low-noise equivalent power of 2.27×10^(-17)W·Hz^(-1/2),a response time of 0.3 s,and a recovery time of 2.12 s.This study provides a new solution for the preparation of high-performance GaAs detectors and promotes the development of optoelectronic devices for GaAs NWs.
基金financially supported by the National Natural Science Foundation of China (Nos.52102234 and 51972094)the High-level Talents Research Initiation Project of Hebei University (No.521000981421)Hebei Province Introduced Overseas Student Funding Project (No.C20210313)。
文摘SnTe has received considerable attention as an environmentally friendly alternative to the representative thermoelectric material of PbTe.However,excessive hole carrier concentration in SnTe results in an extremely low Seebeck coefficient and high thermal conductivity,which makes it exhibit relatively inferior thermoelectric properties.In this work,the thermoelectric performance of p-type SnTe is enhanced through regulating its energy band structures and reducing its electronic thermal conductivity by combining Bi doping with CdSe alloying.First,the carrier concentration of SnTe is successfully suppressed via Bi doping,which significantly decreases the electronic thermal conductivity.Then,the convergence and flattening of the valence bands by alloying CdSe effectively improves the effective mass of SnTe while restraining its carrier mobility.Finally,a maximum figure of merit(ZT) of~ 0.87 at 823 K and an average ZT of~ 0.51 at 300-823 K have been achieved in Sn_(0.96)Bi_(0.04)Te-5%CdSe.Our results indicate that decreasing the electronic thermal conductivity is an effective means of improving the performance of thermoelectric materials with a high carrier concentration.
基金supported by the Aeronautical Science Foundation of China (Grant No 2003ZG51069)
文摘First-principles calculations have been performed to investigate the ground state electronic properties of BaFeO3 （BFO）. Local spin density approximation （LSDA） plus U （LSDA＋U） treatment modified the metallic behaviour to insulated one with a band gap of 4.12eV. The spontaneous polarization was found to be 89.3μC/cm^2 with Berry phase scheme in terms of the modern theory of polarization. Fe-3d eg were split into two singlet states （dz2 and dx2-v2）, and Fe-3d t2g were split into one doublet states（dze and dyz） and one singlet states（dzy） after Fe and O displaced along the c axis. Meanwhile the occupation numbers of dx2, dxz, dyz and OT pz （on the top of Fe） were increased at the expense of those in xy plane. Our results showed that it was the sensitivity of hybridization to ferroelectric distortions, not just the total change of hybridization, that produced the possibility of ferroelectricity. Moreover, the increasing occupation numbers of OT pz and Fe dz2 favoured the 180° coupling between Fe-3d eg and Fe-3d t2g, leading to ferromagnetic ordering, which has been confirmed by the increase of magnetic moment by 0.13μB per formula unit in the polarized direction. Hence, the magnetization can be altered by the reversal of external electric field.
文摘Quasiparticle band structures of the defective anatase TiO2 bulk with O vacancy, Ti interstitial and H interstitial are investigated by the GW method within many-body Green＇s function theory. The computed direct band gap of the perfect anatase bulk is 4.3 eV, far larger than the experimental optical absorption edge （3.2 eV）. We found that this can be ascribed to the inherent defects in anatase which drag the conduction band （CB） edge down. The occupied band-gap states induced by these defects locate close to the CB edge, exclud- ing the possible contribution of these bulk defects to the deep band-gap state below CB as observed in experiments.
基金Supported by the National Natural Science Foundation of China(61102022)the Fundamental Research Foundation of Beijing Institute of Technology of China(20120542014)
文摘Six circularly polarized patch antennas with electromagnetic band gap（EBG）arranged at different locations were studied.These EBG antennas were compared in terms of impedance bandwidth,axial ratio（AR）bandwidth and radiation patterns.When the EBG cells were placed closer to the edge of the substrate,the EBG antenna had a larger front radiation and a narrower bandwidth.Integrating the EBG cells closer to the center of the patch resulted in a wider impedance bandwidth,a wider axial ratio bandwidth and a decreased front gain.
基金Supported by the National Natural Science Foundation of China (No. 20373073)the National Basic Research Program of China (No. 2007CB815307)+1 种基金the Funds of Chinese Academy of Sciences (KJCX2-YW-H01)Fujian Key Laboratory of Nanomaterials (No. 2006L2005)
文摘Band structure and bonding properties have been investigated in terms of periodic density functional theory（DFT） method,and two-photon absorption（TPA） spectra have been simulated by two-band model for ZnGeP2 and AgGaS2 crystals.It has been predicted that the AgGaS2 crystal has a wider window of nonlinear transmission,and the laser pumping energy larger than 1.02 and 1.35 eV will lead to deleterious TPA of higher nonlinear effect for ZnGeP2 and AgGaS2 crystals,respectively.Electron origin of TPA for them is also discussed.
基金supported by the National Natural Science Foundation of China (Grant No. 10974061)the Program for Innovative Research Team of the Higher Education in Guangdong of China (Grant No. 06CXTD005)
文摘By means of the network equation and generalized dimensionless Floquet-Bloch theorem, this paper investigates the properties of the band number and width for quadrangular multiconnected networks （QMNs） with a different number of connected waveguide segments （NCWSs） and various matching ratio of waveguide length （MRWL）. It is found that all photonic bands are wide bands when the MRWL is integer. If the integer attribute of MRWL is broken, narrow bands will be created from the wide band near the centre of band structure. For two-segment-connected networks and three-segment-connected networks, it obtains a series of formulae of the band number and width. On the other hand, it proposes a so-called concept of two-segment-connected quantum subsystem and uses it to discuss the complexity of the band structures of QMNs. Based on these formulae, one can dominate the number, width and position of photonic bands within designed frequencies by adjusting the NCWS and MRWL. There would be potential applications for designing optical switches, optical narrow-band filters, dense wavelength-division-multiplexing devices and other correlative waveguide network devices.
基金support from the National Natural Science Foundation of China(Grant No.11725418)the National Key Research and Development Program of China(Grant No.2016YFA0301004)+3 种基金Science Challenge Project,China(Grant No.TZ2016004)Beijing Advanced Innovation Center for Future Chip(ICFC)Tsinghua University Initiative Scientific Research Programfunded by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)–TRR 173–268565370(projects A02)。
文摘Artificially constructed van der Waals heterostructures(vdWHs)provide an ideal platform for realizing emerging quantum phenomena in condensed matter physics.Two methods for building vdWHs have been developed:stacking two-dimensional(2D)materials into a bilayer structure with different lattice constants,or with different orientations.The interlayer coupling stemming from commensurate or incommensurate superlattice pattern plays an important role in vdWHs for modulating the band structures and generating new electronic states.In this article,we review a series of novel quantum states discovered in two model vdWH systems—graphene/hexagonal boron nitride(hBN)hetero-bilayer and twisted bilayer graphene(tBLG),and discuss how the electronic structures are modified by such stacking and twisting.We also provide perspectives for future studies on hetero-bilayer materials,from which an expansion of 2D material phase library is expected.
基金supported by the Shaanxi Natural Science Basic Research Program(No.2023-JC-QN-0376)the National Natural Science Foundation of China(Nos.52074207 and 51874081).
文摘Banded structure is a common harmful microstructure for low carbon microalloyed steel,which seriously shortens the service life of processed parts.In order to study the effect of oxide metallurgy on improving banded structure,the Ti-Zr deoxidized low carbon microalloyed steel that can play the oxide metallurgical role of inclusion was chosen as the research object,and the inclusion characteristics,microstructure and transverse and longitudinal mechanical properties after hot rolling were analyzed.The results showed the inclusion number density increased in all experimental steels after hot rolling,and a large number of long strip inclusions with aspect ratio greater than 3 appeared along the rolling direction.In addition,after hot rolling,there were element segregation bands in the experimental steels,and granular bainite bands were formed in the element enrichment zone.However,the intragranular ferrite generated in the cooling process destroyed the continuity of granular bainite bands,so that the microstructure anisotropy indexes of experimental steels were small.The mechanical properties analysis showed that the anisotropy of performance was mainly reflected in plasticity and toughness in the experimental steels.Among them,the difference ratio of elongation,section shrinkage and impact energy of No.2 steel was 1.69%,3.87% and 1.69%,respectively,which were less than those of No.1 steel and No.3 steel.The anisotropy of microstructure and mechanical properties of No.2 steel that full played the role of oxide metallurgy were improved,and the banded structure control of low carbon microalloyed steel can be realized by oxide metallurgy technology.
文摘We adopt the density function theory with generalized approximation by the Beeke exchange plus Lee-Yang-Parr correlation functional to calculate the electronic first-principles band structure of tin-phthalocyanine （SnPc）. The intermolecular interaction related to transport behavior was analyzed from the F-point wave function as well as from the bandwidths and band gaps. From the calculated bandwidths of the frontier bands as well as the effective masses of the electron and hole, it can be concluded that the mobility of the electron is about two times larger than that of the hole. Furthermore, when several bands near the Fermi surface are taken into account, we find that the interband gaps within the unoccupied bands are generally smaller than those of the occupied bands, indicating that the electron can hop from one band to another which is much easier than the hole. This may happen through electron-phonon coupling for instance, thus effectively yielding an even larger mobility for the electron than for the hole. These facts indicate that in SnPc the electrons are the dominant carriers in transport, in contrast to most organic materials.
