Photoelectrochemical water oxidation(PEC-WO)as a green and sustainable route to produce H_(2)O_(2)has attracted extensive attentions.However,water oxidation to H_(2)O_(2)via a 2e^(-) pathway is thermodynamically more ...Photoelectrochemical water oxidation(PEC-WO)as a green and sustainable route to produce H_(2)O_(2)has attracted extensive attentions.However,water oxidation to H_(2)O_(2)via a 2e^(-) pathway is thermodynamically more difficult than to O_(2)via a 4e^(-)pathway.Herein,with a series of BiVO_(4)-based photoanodes,the decisive factors determining the PEC activity and selectivity are elucidated,combining a comprehensive experimental and theoretical investigations.It is discovered that the ZnO/BiVO_(4)photoanode(ZnO/BVO)forms a Type-Ⅱheterojunction in energy level alignment.The accelerated photogenerated charge separation/transfer dynamics generates denser surface holes and higher surface photovoltage.Therefore,the activity of water oxidation reaction is promoted.The selectivity of PEC-WO to H_(2)O_(2)is found to be potential-dependent,i.e.,at the lower potentials(PEC-dominated),surface hole density determines the selectivity;and at the higher potentials(electrochemical-dominated),surface reaction barriers govern the selectivity.For the ZnO/BVO heterojunction photoanode,the higher surface hole density facilitates the generation of OH·and the subsequent OH·/OH·coupling to form H_(2)O_(2),thus rising up with potentials;at the higher potentials,the 2-electron pathway barrier over ZnO/BVO surface is lower than over BVO surface,which benefits from the electronic structure regulation by the underlying ZnO alleviating the over-strong adsorption of^(*)OH on BVO,thus,the two-electron pathway to produce H_(2)O_(2)is more favored than on BVO surface.This work highlights the crucial role of band energy structure of semiconductors on both PEC reaction activity and selectivity,and the knowledge gained is expected to be extended to other photoeletrochemical reactions.展开更多
SnTe has received considerable attention as an environmentally friendly alternative to the representative thermoelectric material of PbTe.However,excessive hole carrier concentration in SnTe results in an extremely lo...SnTe has received considerable attention as an environmentally friendly alternative to the representative thermoelectric material of PbTe.However,excessive hole carrier concentration in SnTe results in an extremely low Seebeck coefficient and high thermal conductivity,which makes it exhibit relatively inferior thermoelectric properties.In this work,the thermoelectric performance of p-type SnTe is enhanced through regulating its energy band structures and reducing its electronic thermal conductivity by combining Bi doping with CdSe alloying.First,the carrier concentration of SnTe is successfully suppressed via Bi doping,which significantly decreases the electronic thermal conductivity.Then,the convergence and flattening of the valence bands by alloying CdSe effectively improves the effective mass of SnTe while restraining its carrier mobility.Finally,a maximum figure of merit(ZT) of~ 0.87 at 823 K and an average ZT of~ 0.51 at 300-823 K have been achieved in Sn_(0.96)Bi_(0.04)Te-5%CdSe.Our results indicate that decreasing the electronic thermal conductivity is an effective means of improving the performance of thermoelectric materials with a high carrier concentration.展开更多
So far,a clear understanding about the relationship of variable energy band structure with the corresponding charge-discharge process of energy storage materials is still lacking.Here,using optical spectroscopy(red-gr...So far,a clear understanding about the relationship of variable energy band structure with the corresponding charge-discharge process of energy storage materials is still lacking.Here,using optical spectroscopy(red-green-blue(RGB)value,reflectivity,transmittance,UV-vis,XPS,UPS)to studyα-Co(OH)_(2) electrode working in KOH electrolyte as the research object,we provide direct experimental evidence that:(1)The intercalation of OH-ions will reduce the valence/conduction band(VB and CB)and band gap energy(Eg)values;(2)The deintercalation of OH-ions corresponds with the reversion of VB,CB and E_(g) to the initial values;(3)The color of Co(OH)_(2) electrode also exhibit regular variations in RGB value during the charge-discharge process.展开更多
Materials with kagome lattices have attracted significant research attention due to their nontrivial features in energy bands.We theoretically investigate the evolution of electronic band structures of kagome lattices...Materials with kagome lattices have attracted significant research attention due to their nontrivial features in energy bands.We theoretically investigate the evolution of electronic band structures of kagome lattices in response to uniaxial strain using both a tight-binding model and an antidot model based on a periodic muffin-tin potential.It is found that the Dirac points move with applied strain.Furthermore,the flat band of unstrained kagome lattices is found to develop into a highly anisotropic shape under a stretching strain along y direction,forming a partially flat band with a region dispersionless along ky direction while dispersive along kx direction.Our results shed light on the possibility of engineering the electronic band structures of kagome materials by mechanical strain.展开更多
Band structure analysis holds significant importance for understanding the optoelectronic characteristics of semiconductor structures and exploring their potential applications in practice. For quantum well structures...Band structure analysis holds significant importance for understanding the optoelectronic characteristics of semiconductor structures and exploring their potential applications in practice. For quantum well structures, the energy of carriers in the well splits into discrete energy levels due to the confinement of barriers in the growth direction. However, the discrete energy levels obtained at a fixed wave vector cannot accurately reflect the actual energy band structure. In this work, the band structure of the type-II quantum wells is reanalyzed. When the wave vectors of the entire Brillouin region(corresponding to the growth direction) are taken into account, the quantized energy levels of the carriers in the well are replaced by subbands with certain energy distributions. This new understanding of the energy bands of low-dimensional structures not only helps us to have a deeper cognition of the structure, but also may overturn many viewpoints in traditional band theories and serve as supplementary to the band theory of low-dimensional systems.展开更多
Doping with various impurities is an effective approach to improve the photoelectrochemical properties of TiO2. Here, we explore the effect of oxygen vacancy on geometric and elec- tronic properties of compensated （i...Doping with various impurities is an effective approach to improve the photoelectrochemical properties of TiO2. Here, we explore the effect of oxygen vacancy on geometric and elec- tronic properties of compensated （i.e. V-N and Cr-C） and non-compensated （i.e. V-C and Cr-N） codoped anatase TiO2 by performing extensive density functional theory calculations. Theoretical results show that oxygen vacancy prefers to the neighboring site of metal dopant （i.e. V or Cr atom）. After introduction of oxygen vacancy, the unoccupied impurity bands located within band gap of these codoped TiO2 will be filled with electrons, and the posi- tion of conduction band offset does not change obviously, which result in the reduction of photoinduced carrier recombination and the good performance for hydrogen production via water splitting. Moreover, we find that oxygen vacancy is easily introduced in V-N codoped TiO2 under O-poor condition. These theoretical insights are helpful for designing codoped TiO2 with high photoelectrochemical performance.展开更多
This study on the band structures and charge densities of nitrogen (N)-, carbon (C)- and boron (B)-doped titanium dioxide (TiO2) by first-principles simulation with the CASTEP code (Segall et al., 2002) showed that th...This study on the band structures and charge densities of nitrogen (N)-, carbon (C)- and boron (B)-doped titanium dioxide (TiO2) by first-principles simulation with the CASTEP code (Segall et al., 2002) showed that the three 2p bands of im-purity atom are located above the valence-band maximum and below the Ti 3d bands, and that along with the decreasing of im-purity atomic number, the fluctuations become more intensive. We cannot observe obvious band-gap narrowing in our result. Therefore, the cause of absorption in visible light might be the isolated impurity atom 2p states in band-gap rather than the band-gap narrowing.展开更多
Transition-metal phosphides(TMPs)with high catalytic activity are widely used in the design of electrodes for water splitting.However,a major challenge is how to achieve the trade-off between activity and stability of...Transition-metal phosphides(TMPs)with high catalytic activity are widely used in the design of electrodes for water splitting.However,a major challenge is how to achieve the trade-off between activity and stability of TMPs.Herein,a novel method for synthesizing CoP nanoparticles encapsu-lated in a rich-defect carbon shell(CoP/DCS)is developed through the self-assembly of modified polycyclic aromatic molecules.The graft and removal of high-activity C-N bonds of aromatic molecules render the controllable design of crystallite defects of carbon shell.The density functional theory calculation indicates that the carbon defects with unpaired electrons could effectively tailor the band structure of CoP.Benefiting from the improved activity and corrosion resistance,the CoP/DCS delivers outstanding difunctional hydrogen evolution reaction(88 mV)and oxygen evolution reaction(251 mV)performances at 10 mA cm^(−2)current density.Furthermore,the coupled water electrolyzer with CoP/DCS as both the cathode and anode presents ultralow cell voltages of 1.49 V to achieve 10 mA cm^(−2)with long-time stability.This strategy to improve TMPs electrocatalyst with rich-DCS and heterogeneous structure will inspire the design of other transition metal compound electrocatalysts for water splitting.展开更多
Metal halide perovskite nanostructures have emerged as low-dimensional semiconductors of great significance in many fields such as photovoltaics,photonics,and optoelectronics.Extensive efforts on the controlled synthe...Metal halide perovskite nanostructures have emerged as low-dimensional semiconductors of great significance in many fields such as photovoltaics,photonics,and optoelectronics.Extensive efforts on the controlled synthesis of perovskite nanostructures have been made towards potential device applications.The engineering of their band structures holds great promise in the rational tuning of the electronic and optical properties of perovskite nanostructures,which is one of the keys to achieving efficient and multifunctional optoelectronic devices.In this article,we summarize recent advances in band structure engineering of perovskite nanostructures.A survey of bandgap engineering of nanostructured perovskites is firstly presented from the aspects of dimensionality tailoring,compositional substitution,phase segregation and transition,as well as strain and pressure stimuli.The strategies of electronic doping are then reviewed,including defect-induced self-doping,inorganic or organic molecules-based chemical doping,and modification by metal ions or nanostructures.Based on the bandgap engineering and electronic doping,discussions on engineering energy band alignments in perovskite nanostructures are provided for building high-performance perovskite p-n junctions and heterostructures.At last,we provide our perspectives in engineering band structures of perovskite nanostructures towards future low-energy optoelectronics technologies.展开更多
A multiple monopole （or multipole） method based on the generalized mul- tipole technique （GMT） is proposed to calculate the band structures of scalar waves in two-dimensional phononic crystals which are composed o...A multiple monopole （or multipole） method based on the generalized mul- tipole technique （GMT） is proposed to calculate the band structures of scalar waves in two-dimensional phononic crystals which are composed of arbitrarily shaped cylinders embedded in a host medium. In order to find the eigenvalues of the problem, besides the sources used to expand the wave field, an extra monopole source is introduced which acts as the external excitation. By varying the frequency of the excitation, the eigenvalues can be localized as the extreme points of an appropriately chosen function. By sweeping the frequency range of interest and sweeping the boundary of the irreducible first Brillouin zone, the band structure is obtained. Some numerical examples are presented to validate the proposed method.展开更多
A new intermetallic compound, Sm3In5, has been synthesized by solid-state reaction of the corresponding pure elements in a welded niobium tube at high temperature. Its crystal structure was established by single-cryst...A new intermetallic compound, Sm3In5, has been synthesized by solid-state reaction of the corresponding pure elements in a welded niobium tube at high temperature. Its crystal structure was established by single-crystal X-ray diffraction. Sm3In5 crystallizes in orthorhombic, space group Cmcm with a = 10.0137（8）, b = 8.1211（7）, c = 10.3858（8） A, V = 844.60（1） A^3, Z = 4, Mr = 1025.15, Dc = 8.062 g/cm^3, μ = 33.791 mm^-1, F（000） = 1724, the final R = 0.0346 and wR = 0.0775 for 533 observed reflections with I 〉 2σ（I）. The structure of Sm3In5 belongs to the modified Pu3Pd5 type. It is isostructural with La3In5 and β-Y3In5, containing one-dimensional （1D） [In5] cluster chains along the c-axis, which are weakly interconnected via In-In bonds （3.345A） to form a three-dimensional （3D） structure. The samarium cations are located at the voids between the 1D [In5] cluster chains. Band structure calculations based on Density Function Theory （DFT） method indicate that Sm3In5 is metallic.展开更多
A new polar intermetallic compound, Eu3Sn5, has been synthesized by solid-state reaction of the corresponding pure elements in a stoicbiometric ratio in a welded tantalum tube at high temperature. Its crystal structur...A new polar intermetallic compound, Eu3Sn5, has been synthesized by solid-state reaction of the corresponding pure elements in a stoicbiometric ratio in a welded tantalum tube at high temperature. Its crystal structure was established by single-crystal X-ray diffraction. EuaSn5 crystallizes in orthorhombic, space group Cmcm with a = 10.466（11）, b = 8,445（8）, c = 10.662（12）/k, V = 942.4（17）A^3, Z = 4, Mr = 1049.33, De= 7.396 g/cm^3, ,μ = 32.578 mm^-1, F（000） = 1756, the final R = 0.0236 and wR = 0.0472 for 535 observed reflections with I 〉 2σ（I）. Its structure belongs to the modified Pu3Pd5 type. It is isostructural with SraSn5 and Ba3Sn5, featuring [Sn5] square pyramidal clusters described as “arachno” according to the Wade-Mingos electron counting rules. The europium cations are located at the voids between the square pyramidal clusters. Results of the extended Htickel band structure calculations indicate that Eu3Sn5 is metallic.展开更多
A radial basis function collocation method based on the nonlocal elastic continuum theory is developed to compute the band structures of nanoscale multilayered phononic crystals. The effects of nonlocal imperfect inte...A radial basis function collocation method based on the nonlocal elastic continuum theory is developed to compute the band structures of nanoscale multilayered phononic crystals. The effects of nonlocal imperfect interfaces on band structures of transverse waves propagating obliquely or vertically in the system are studied. The correctness of the present method is verified by comparing the numerical results with those obtained by applying the transfer matrix method in the case of nonlocal perfect interface. Furthermore, the influences of the nanoscale size, the impedance ratio and the incident angle on the cut-off frequency and band structures are investigated and discussed in detail. Numerical results show that the nonlocal interface imperfections have significant effects on the band structures in the macroscopic and microscopic scale.展开更多
A new intermetallic compound,YbCu6In6,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-cryst...A new intermetallic compound,YbCu6In6,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-crystal X-ray diffraction.YbCu6In6 crystallizes in tetragonal space group I4/mmm with a = 9.2283（5）,c = 5.4015（4）,V = 460.00（5） 3,Z = 2,Mr = 1243.20,Dc = 8.976 g/cm3,μ = 38.243 mm-1,F（000） = 1076,and the final R = 0.0258 and wR = 0.0602 for 173 observed reflections with I 〉 2σ（I）.The structure of YbCu6In6 belongs to the ThMn12 type.It is isostructural with RECu6In6（RE = Y,Ce,Pr,Nd,Gd,Tb,Dy）,containing one-dimensional（1D） [Cu10In6] cluster chain along the c axis,which is interconnected via sharing the Cu（1） atoms to form a three-dimensional（3D） [Cu6In6] framework with Yb atoms encapsulated in the 1D tunnels along the c axis.Band structure calculations based on Density Functional Theory（DFT） method indicate that YbCu6In6 is metallic.展开更多
The electronic structure of YbB6 crystal was studied by means of density functional （GGA ＋ U） method. The calculations were performed by FLAPW method. The high accurate band structure was achieved. The correlation ...The electronic structure of YbB6 crystal was studied by means of density functional （GGA ＋ U） method. The calculations were performed by FLAPW method. The high accurate band structure was achieved. The correlation between the feature of the band structure and the Yb-B6 bonding in YbB6 was analyzed. On this basis, some optical constants of YbB6 such as reflectivity, dielectric function, optical conductivity, and energy-loss function were calculated. The results are in good agreement with the experiments. The real part of the optical conductivity spectrum and the energy-loss function spectrum were analyzed in detail. The assignments of the spectra were carried out to correlate the spectral peaks with the interband electronic transitions, which justify the reasonable part of previous empirical assignments and renew the missed or incorrect ones.展开更多
Quasiparticle band structures of the defective anatase TiO2 bulk with O vacancy, Ti interstitial and H interstitial are investigated by the GW method within many-body Green＇s function theory. The computed direct band...Quasiparticle band structures of the defective anatase TiO2 bulk with O vacancy, Ti interstitial and H interstitial are investigated by the GW method within many-body Green＇s function theory. The computed direct band gap of the perfect anatase bulk is 4.3 eV, far larger than the experimental optical absorption edge （3.2 eV）. We found that this can be ascribed to the inherent defects in anatase which drag the conduction band （CB） edge down. The occupied band-gap states induced by these defects locate close to the CB edge, exclud- ing the possible contribution of these bulk defects to the deep band-gap state below CB as observed in experiments.展开更多
Using a tight binding transfer matrix method, we calculate the complex band structure of armchair graphene nanoribbons. The real part of the complex band structure calculated by the transfer matrix method fits well wi...Using a tight binding transfer matrix method, we calculate the complex band structure of armchair graphene nanoribbons. The real part of the complex band structure calculated by the transfer matrix method fits well with the bulk band structure calculated by a Hermitian matrix. The complex band structure gives extra information on carrier＇s decay behaviour. The imaginary loop connects the conduction and valence band, and can profoundly affect the characteristics of nanoscale electronic device made with graphene nanoribbons. In this work, the complex band structure calculation includes not only the first nearest neighbour interaction, but also the effects of edge bond relaxation and the third nearest neighbour interaction. The band gap is classified into three classes. Due to the edge bond relaxation and the third nearest neighbour interaction term, it opens a band gap for N = 3M- 1. The band gap is almost unchanged for N =3M ＋ 1, but decreased for N = 3M. The maximum imaginary wave vector length provides additional information about the electrical characteristics of graphene nanoribbons, and is also classified into three classes.展开更多
Band structure and bonding properties have been investigated in terms of periodic density functional theory（DFT） method,and two-photon absorption（TPA） spectra have been simulated by two-band model for ZnGeP2 and A...Band structure and bonding properties have been investigated in terms of periodic density functional theory（DFT） method,and two-photon absorption（TPA） spectra have been simulated by two-band model for ZnGeP2 and AgGaS2 crystals.It has been predicted that the AgGaS2 crystal has a wider window of nonlinear transmission,and the laser pumping energy larger than 1.02 and 1.35 eV will lead to deleterious TPA of higher nonlinear effect for ZnGeP2 and AgGaS2 crystals,respectively.Electron origin of TPA for them is also discussed.展开更多
A new intermetallic compound,Tb3Co4Sn13,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-cry...A new intermetallic compound,Tb3Co4Sn13,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-crystal X-ray diffraction.Tb3Co4Sn13 crystallizes in cubic,space group Pm3n（No.223） with a = 9.5072（2） ,V = 859.33（3） 3,Z = 2,Mr = 2255.45,Dc = 8.717 g/cm3,μ = 34.369 mm-1,F（000） = 1906,and the final R = 0.0140 and wR = 0.0312 for 199 observed reflections with I〉 2σ（I）.The structure of Tb3Co4Sn13 belongs to the Yb3Rh4Sn13 type.It is isostructural with RE3Co4Sn13（RE = La,Ce）,featuring a 3D [Co4Sn12] framework based on [CoSn6] trigonal prisms.The [CoSn6] trigonal prisms are interconnected via corner-sharing and Sn-Sn bonds to form a 3D [Co4Sn12] framework.The other Sn and Tb atoms are located in the spacers of the 3D framework.Band structure calculations indicate that Tb3Co4Sn13 is metallic.展开更多
By means of the network equation and generalized dimensionless Floquet-Bloch theorem, this paper investigates the properties of the band number and width for quadrangular multiconnected networks （QMNs） with a differ...By means of the network equation and generalized dimensionless Floquet-Bloch theorem, this paper investigates the properties of the band number and width for quadrangular multiconnected networks （QMNs） with a different number of connected waveguide segments （NCWSs） and various matching ratio of waveguide length （MRWL）. It is found that all photonic bands are wide bands when the MRWL is integer. If the integer attribute of MRWL is broken, narrow bands will be created from the wide band near the centre of band structure. For two-segment-connected networks and three-segment-connected networks, it obtains a series of formulae of the band number and width. On the other hand, it proposes a so-called concept of two-segment-connected quantum subsystem and uses it to discuss the complexity of the band structures of QMNs. Based on these formulae, one can dominate the number, width and position of photonic bands within designed frequencies by adjusting the NCWS and MRWL. There would be potential applications for designing optical switches, optical narrow-band filters, dense wavelength-division-multiplexing devices and other correlative waveguide network devices.展开更多
基金financially supported by the National Natural Science Foundation of China(22478211,22179067,22372017)the Major Fundamental Research Program of Natural Science Foundation of Shandong Province(ZR2022ZD10)。
文摘Photoelectrochemical water oxidation(PEC-WO)as a green and sustainable route to produce H_(2)O_(2)has attracted extensive attentions.However,water oxidation to H_(2)O_(2)via a 2e^(-) pathway is thermodynamically more difficult than to O_(2)via a 4e^(-)pathway.Herein,with a series of BiVO_(4)-based photoanodes,the decisive factors determining the PEC activity and selectivity are elucidated,combining a comprehensive experimental and theoretical investigations.It is discovered that the ZnO/BiVO_(4)photoanode(ZnO/BVO)forms a Type-Ⅱheterojunction in energy level alignment.The accelerated photogenerated charge separation/transfer dynamics generates denser surface holes and higher surface photovoltage.Therefore,the activity of water oxidation reaction is promoted.The selectivity of PEC-WO to H_(2)O_(2)is found to be potential-dependent,i.e.,at the lower potentials(PEC-dominated),surface hole density determines the selectivity;and at the higher potentials(electrochemical-dominated),surface reaction barriers govern the selectivity.For the ZnO/BVO heterojunction photoanode,the higher surface hole density facilitates the generation of OH·and the subsequent OH·/OH·coupling to form H_(2)O_(2),thus rising up with potentials;at the higher potentials,the 2-electron pathway barrier over ZnO/BVO surface is lower than over BVO surface,which benefits from the electronic structure regulation by the underlying ZnO alleviating the over-strong adsorption of^(*)OH on BVO,thus,the two-electron pathway to produce H_(2)O_(2)is more favored than on BVO surface.This work highlights the crucial role of band energy structure of semiconductors on both PEC reaction activity and selectivity,and the knowledge gained is expected to be extended to other photoeletrochemical reactions.
基金financially supported by the National Natural Science Foundation of China (Nos.52102234 and 51972094)the High-level Talents Research Initiation Project of Hebei University (No.521000981421)Hebei Province Introduced Overseas Student Funding Project (No.C20210313)。
文摘SnTe has received considerable attention as an environmentally friendly alternative to the representative thermoelectric material of PbTe.However,excessive hole carrier concentration in SnTe results in an extremely low Seebeck coefficient and high thermal conductivity,which makes it exhibit relatively inferior thermoelectric properties.In this work,the thermoelectric performance of p-type SnTe is enhanced through regulating its energy band structures and reducing its electronic thermal conductivity by combining Bi doping with CdSe alloying.First,the carrier concentration of SnTe is successfully suppressed via Bi doping,which significantly decreases the electronic thermal conductivity.Then,the convergence and flattening of the valence bands by alloying CdSe effectively improves the effective mass of SnTe while restraining its carrier mobility.Finally,a maximum figure of merit(ZT) of~ 0.87 at 823 K and an average ZT of~ 0.51 at 300-823 K have been achieved in Sn_(0.96)Bi_(0.04)Te-5%CdSe.Our results indicate that decreasing the electronic thermal conductivity is an effective means of improving the performance of thermoelectric materials with a high carrier concentration.
基金supported by the National Natural Science Foundation of China(Nos.51972146,52072150).
文摘So far,a clear understanding about the relationship of variable energy band structure with the corresponding charge-discharge process of energy storage materials is still lacking.Here,using optical spectroscopy(red-green-blue(RGB)value,reflectivity,transmittance,UV-vis,XPS,UPS)to studyα-Co(OH)_(2) electrode working in KOH electrolyte as the research object,we provide direct experimental evidence that:(1)The intercalation of OH-ions will reduce the valence/conduction band(VB and CB)and band gap energy(Eg)values;(2)The deintercalation of OH-ions corresponds with the reversion of VB,CB and E_(g) to the initial values;(3)The color of Co(OH)_(2) electrode also exhibit regular variations in RGB value during the charge-discharge process.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11904261 and 11904259).
文摘Materials with kagome lattices have attracted significant research attention due to their nontrivial features in energy bands.We theoretically investigate the evolution of electronic band structures of kagome lattices in response to uniaxial strain using both a tight-binding model and an antidot model based on a periodic muffin-tin potential.It is found that the Dirac points move with applied strain.Furthermore,the flat band of unstrained kagome lattices is found to develop into a highly anisotropic shape under a stretching strain along y direction,forming a partially flat band with a region dispersionless along ky direction while dispersive along kx direction.Our results shed light on the possibility of engineering the electronic band structures of kagome materials by mechanical strain.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 61991441 and 62004218)the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDB01000000)Youth Innovation Promotion Association Chinese Academy of Sciences (Grant No. 2021005)。
文摘Band structure analysis holds significant importance for understanding the optoelectronic characteristics of semiconductor structures and exploring their potential applications in practice. For quantum well structures, the energy of carriers in the well splits into discrete energy levels due to the confinement of barriers in the growth direction. However, the discrete energy levels obtained at a fixed wave vector cannot accurately reflect the actual energy band structure. In this work, the band structure of the type-II quantum wells is reanalyzed. When the wave vectors of the entire Brillouin region(corresponding to the growth direction) are taken into account, the quantized energy levels of the carriers in the well are replaced by subbands with certain energy distributions. This new understanding of the energy bands of low-dimensional structures not only helps us to have a deeper cognition of the structure, but also may overturn many viewpoints in traditional band theories and serve as supplementary to the band theory of low-dimensional systems.
基金This work was supported by the National Natural Sci- ence Foundation of China （No.11034006, No.21273208, and No.21473168）, the Anhui Provincial Natural Sci- ence Foundation （No.1408085QB26）, the hmdamental Research Funds for the Central Universities, the China Postdoctoral Science Foundation （No.2012M511409）, and the Supercomputing Center of Chinese Academy of Sciences, Shanghai and USTC Supercomputer Cen- ters.
文摘Doping with various impurities is an effective approach to improve the photoelectrochemical properties of TiO2. Here, we explore the effect of oxygen vacancy on geometric and elec- tronic properties of compensated （i.e. V-N and Cr-C） and non-compensated （i.e. V-C and Cr-N） codoped anatase TiO2 by performing extensive density functional theory calculations. Theoretical results show that oxygen vacancy prefers to the neighboring site of metal dopant （i.e. V or Cr atom）. After introduction of oxygen vacancy, the unoccupied impurity bands located within band gap of these codoped TiO2 will be filled with electrons, and the posi- tion of conduction band offset does not change obviously, which result in the reduction of photoinduced carrier recombination and the good performance for hydrogen production via water splitting. Moreover, we find that oxygen vacancy is easily introduced in V-N codoped TiO2 under O-poor condition. These theoretical insights are helpful for designing codoped TiO2 with high photoelectrochemical performance.
基金Project (No. 2004AA32G040) supported by the Hi-Tech Researchand Development Program (863) of China
文摘This study on the band structures and charge densities of nitrogen (N)-, carbon (C)- and boron (B)-doped titanium dioxide (TiO2) by first-principles simulation with the CASTEP code (Segall et al., 2002) showed that the three 2p bands of im-purity atom are located above the valence-band maximum and below the Ti 3d bands, and that along with the decreasing of im-purity atomic number, the fluctuations become more intensive. We cannot observe obvious band-gap narrowing in our result. Therefore, the cause of absorption in visible light might be the isolated impurity atom 2p states in band-gap rather than the band-gap narrowing.
基金Youth Innovation Promotion Association of the Chinese Academy of Sciences,Grant/Award Number:2021174National Natural Science Foundation of China,Grant/Award Number:51902326Natural Science Foundation of Shanxi Province,Grant/Award Numbers:201901D211588,20210302124421。
文摘Transition-metal phosphides(TMPs)with high catalytic activity are widely used in the design of electrodes for water splitting.However,a major challenge is how to achieve the trade-off between activity and stability of TMPs.Herein,a novel method for synthesizing CoP nanoparticles encapsu-lated in a rich-defect carbon shell(CoP/DCS)is developed through the self-assembly of modified polycyclic aromatic molecules.The graft and removal of high-activity C-N bonds of aromatic molecules render the controllable design of crystallite defects of carbon shell.The density functional theory calculation indicates that the carbon defects with unpaired electrons could effectively tailor the band structure of CoP.Benefiting from the improved activity and corrosion resistance,the CoP/DCS delivers outstanding difunctional hydrogen evolution reaction(88 mV)and oxygen evolution reaction(251 mV)performances at 10 mA cm^(−2)current density.Furthermore,the coupled water electrolyzer with CoP/DCS as both the cathode and anode presents ultralow cell voltages of 1.49 V to achieve 10 mA cm^(−2)with long-time stability.This strategy to improve TMPs electrocatalyst with rich-DCS and heterogeneous structure will inspire the design of other transition metal compound electrocatalysts for water splitting.
基金support from Australian Research Council (ARC, FT150100450, IH150100006 and CE170100039)support from the MCATM and the FLEET+1 种基金the support from Shenzhen Nanshan District Pilotage Team Program (LHTD20170006)support from Guangzhou Science and Technology Program (Grant No. 201804010322)
文摘Metal halide perovskite nanostructures have emerged as low-dimensional semiconductors of great significance in many fields such as photovoltaics,photonics,and optoelectronics.Extensive efforts on the controlled synthesis of perovskite nanostructures have been made towards potential device applications.The engineering of their band structures holds great promise in the rational tuning of the electronic and optical properties of perovskite nanostructures,which is one of the keys to achieving efficient and multifunctional optoelectronic devices.In this article,we summarize recent advances in band structure engineering of perovskite nanostructures.A survey of bandgap engineering of nanostructured perovskites is firstly presented from the aspects of dimensionality tailoring,compositional substitution,phase segregation and transition,as well as strain and pressure stimuli.The strategies of electronic doping are then reviewed,including defect-induced self-doping,inorganic or organic molecules-based chemical doping,and modification by metal ions or nanostructures.Based on the bandgap engineering and electronic doping,discussions on engineering energy band alignments in perovskite nanostructures are provided for building high-performance perovskite p-n junctions and heterostructures.At last,we provide our perspectives in engineering band structures of perovskite nanostructures towards future low-energy optoelectronics technologies.
基金supported by the National Natural Science Foundation of China(Nos.51178037 and10632020)the German Research Foundation(DFG)(Nos.ZH 15/11-1 and ZH 15/16-1)+1 种基金the International Bureau of the German Federal Ministry of Education and Research(BMBF)(No.CHN11/045)the National Basic Research Program of China(No.2010CB732104)
文摘A multiple monopole （or multipole） method based on the generalized mul- tipole technique （GMT） is proposed to calculate the band structures of scalar waves in two-dimensional phononic crystals which are composed of arbitrarily shaped cylinders embedded in a host medium. In order to find the eigenvalues of the problem, besides the sources used to expand the wave field, an extra monopole source is introduced which acts as the external excitation. By varying the frequency of the excitation, the eigenvalues can be localized as the extreme points of an appropriately chosen function. By sweeping the frequency range of interest and sweeping the boundary of the irreducible first Brillouin zone, the band structure is obtained. Some numerical examples are presented to validate the proposed method.
基金supported by the Youth Science Foundation of Jining University (2009QNKJ07 and 2009QNKJ04)
文摘A new intermetallic compound, Sm3In5, has been synthesized by solid-state reaction of the corresponding pure elements in a welded niobium tube at high temperature. Its crystal structure was established by single-crystal X-ray diffraction. Sm3In5 crystallizes in orthorhombic, space group Cmcm with a = 10.0137（8）, b = 8.1211（7）, c = 10.3858（8） A, V = 844.60（1） A^3, Z = 4, Mr = 1025.15, Dc = 8.062 g/cm^3, μ = 33.791 mm^-1, F（000） = 1724, the final R = 0.0346 and wR = 0.0775 for 533 observed reflections with I 〉 2σ（I）. The structure of Sm3In5 belongs to the modified Pu3Pd5 type. It is isostructural with La3In5 and β-Y3In5, containing one-dimensional （1D） [In5] cluster chains along the c-axis, which are weakly interconnected via In-In bonds （3.345A） to form a three-dimensional （3D） structure. The samarium cations are located at the voids between the 1D [In5] cluster chains. Band structure calculations based on Density Function Theory （DFT） method indicate that Sm3In5 is metallic.
基金National Natural Science Foundation of China (Nos. 20573113 and 20521101) NSF of Fujian Province (No. E0420003)
文摘A new polar intermetallic compound, Eu3Sn5, has been synthesized by solid-state reaction of the corresponding pure elements in a stoicbiometric ratio in a welded tantalum tube at high temperature. Its crystal structure was established by single-crystal X-ray diffraction. EuaSn5 crystallizes in orthorhombic, space group Cmcm with a = 10.466（11）, b = 8,445（8）, c = 10.662（12）/k, V = 942.4（17）A^3, Z = 4, Mr = 1049.33, De= 7.396 g/cm^3, ,μ = 32.578 mm^-1, F（000） = 1756, the final R = 0.0236 and wR = 0.0472 for 535 observed reflections with I 〉 2σ（I）. Its structure belongs to the modified Pu3Pd5 type. It is isostructural with SraSn5 and Ba3Sn5, featuring [Sn5] square pyramidal clusters described as “arachno” according to the Wade-Mingos electron counting rules. The europium cations are located at the voids between the square pyramidal clusters. Results of the extended Htickel band structure calculations indicate that Eu3Sn5 is metallic.
基金supports by the National Natural Science Foundation of China (Grants 11002026, 11372039)the Beijing Natural Science Foundation (Grant 3133039)the Scientific Research Foundation for the Returned (Grant 20121832001)
文摘A radial basis function collocation method based on the nonlocal elastic continuum theory is developed to compute the band structures of nanoscale multilayered phononic crystals. The effects of nonlocal imperfect interfaces on band structures of transverse waves propagating obliquely or vertically in the system are studied. The correctness of the present method is verified by comparing the numerical results with those obtained by applying the transfer matrix method in the case of nonlocal perfect interface. Furthermore, the influences of the nanoscale size, the impedance ratio and the incident angle on the cut-off frequency and band structures are investigated and discussed in detail. Numerical results show that the nonlocal interface imperfections have significant effects on the band structures in the macroscopic and microscopic scale.
基金Supported by the National Natural Science Foundation of China (No. 21101075)the research foundation for excellent young and middle-aged scientists of Shandong Province (No. BS2011CL009)+2 种基金the Science & Research Program foundation of high education of Shandong Province (No. J11LB52)the Rehearsal National Foundation of Jining University (Nos. 2011YYJJ06 and 2011YYJJ07)the Youths Science Foundation of Jining University (No. 2011QNKJ07)
文摘A new intermetallic compound,YbCu6In6,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-crystal X-ray diffraction.YbCu6In6 crystallizes in tetragonal space group I4/mmm with a = 9.2283（5）,c = 5.4015（4）,V = 460.00（5） 3,Z = 2,Mr = 1243.20,Dc = 8.976 g/cm3,μ = 38.243 mm-1,F（000） = 1076,and the final R = 0.0258 and wR = 0.0602 for 173 observed reflections with I 〉 2σ（I）.The structure of YbCu6In6 belongs to the ThMn12 type.It is isostructural with RECu6In6（RE = Y,Ce,Pr,Nd,Gd,Tb,Dy）,containing one-dimensional（1D） [Cu10In6] cluster chain along the c axis,which is interconnected via sharing the Cu（1） atoms to form a three-dimensional（3D） [Cu6In6] framework with Yb atoms encapsulated in the 1D tunnels along the c axis.Band structure calculations based on Density Functional Theory（DFT） method indicate that YbCu6In6 is metallic.
基金Project supported by the Ministry of Sciences and Technology of China (2006CB601104)
文摘The electronic structure of YbB6 crystal was studied by means of density functional （GGA ＋ U） method. The calculations were performed by FLAPW method. The high accurate band structure was achieved. The correlation between the feature of the band structure and the Yb-B6 bonding in YbB6 was analyzed. On this basis, some optical constants of YbB6 such as reflectivity, dielectric function, optical conductivity, and energy-loss function were calculated. The results are in good agreement with the experiments. The real part of the optical conductivity spectrum and the energy-loss function spectrum were analyzed in detail. The assignments of the spectra were carried out to correlate the spectral peaks with the interband electronic transitions, which justify the reasonable part of previous empirical assignments and renew the missed or incorrect ones.
文摘Quasiparticle band structures of the defective anatase TiO2 bulk with O vacancy, Ti interstitial and H interstitial are investigated by the GW method within many-body Green＇s function theory. The computed direct band gap of the perfect anatase bulk is 4.3 eV, far larger than the experimental optical absorption edge （3.2 eV）. We found that this can be ascribed to the inherent defects in anatase which drag the conduction band （CB） edge down. The occupied band-gap states induced by these defects locate close to the CB edge, exclud- ing the possible contribution of these bulk defects to the deep band-gap state below CB as observed in experiments.
基金Project supported by the Fundamental Research Funds for the Central Universities (Grant No. YWF-10-02-040)
文摘Using a tight binding transfer matrix method, we calculate the complex band structure of armchair graphene nanoribbons. The real part of the complex band structure calculated by the transfer matrix method fits well with the bulk band structure calculated by a Hermitian matrix. The complex band structure gives extra information on carrier＇s decay behaviour. The imaginary loop connects the conduction and valence band, and can profoundly affect the characteristics of nanoscale electronic device made with graphene nanoribbons. In this work, the complex band structure calculation includes not only the first nearest neighbour interaction, but also the effects of edge bond relaxation and the third nearest neighbour interaction. The band gap is classified into three classes. Due to the edge bond relaxation and the third nearest neighbour interaction term, it opens a band gap for N = 3M- 1. The band gap is almost unchanged for N =3M ＋ 1, but decreased for N = 3M. The maximum imaginary wave vector length provides additional information about the electrical characteristics of graphene nanoribbons, and is also classified into three classes.
基金Supported by the National Natural Science Foundation of China (No. 20373073)the National Basic Research Program of China (No. 2007CB815307)+1 种基金the Funds of Chinese Academy of Sciences (KJCX2-YW-H01)Fujian Key Laboratory of Nanomaterials (No. 2006L2005)
文摘Band structure and bonding properties have been investigated in terms of periodic density functional theory（DFT） method,and two-photon absorption（TPA） spectra have been simulated by two-band model for ZnGeP2 and AgGaS2 crystals.It has been predicted that the AgGaS2 crystal has a wider window of nonlinear transmission,and the laser pumping energy larger than 1.02 and 1.35 eV will lead to deleterious TPA of higher nonlinear effect for ZnGeP2 and AgGaS2 crystals,respectively.Electron origin of TPA for them is also discussed.
基金supported by the Youth Science Foundation of Jining University (2009QNKJ07)
文摘A new intermetallic compound,Tb3Co4Sn13,has been synthesized by solid-state reaction of the corresponding pure elements in a welded tantalum tube at high temperature.Its crystal structure was established by single-crystal X-ray diffraction.Tb3Co4Sn13 crystallizes in cubic,space group Pm3n（No.223） with a = 9.5072（2） ,V = 859.33（3） 3,Z = 2,Mr = 2255.45,Dc = 8.717 g/cm3,μ = 34.369 mm-1,F（000） = 1906,and the final R = 0.0140 and wR = 0.0312 for 199 observed reflections with I〉 2σ（I）.The structure of Tb3Co4Sn13 belongs to the Yb3Rh4Sn13 type.It is isostructural with RE3Co4Sn13（RE = La,Ce）,featuring a 3D [Co4Sn12] framework based on [CoSn6] trigonal prisms.The [CoSn6] trigonal prisms are interconnected via corner-sharing and Sn-Sn bonds to form a 3D [Co4Sn12] framework.The other Sn and Tb atoms are located in the spacers of the 3D framework.Band structure calculations indicate that Tb3Co4Sn13 is metallic.
基金supported by the National Natural Science Foundation of China (Grant No. 10974061)the Program for Innovative Research Team of the Higher Education in Guangdong of China (Grant No. 06CXTD005)
文摘By means of the network equation and generalized dimensionless Floquet-Bloch theorem, this paper investigates the properties of the band number and width for quadrangular multiconnected networks （QMNs） with a different number of connected waveguide segments （NCWSs） and various matching ratio of waveguide length （MRWL）. It is found that all photonic bands are wide bands when the MRWL is integer. If the integer attribute of MRWL is broken, narrow bands will be created from the wide band near the centre of band structure. For two-segment-connected networks and three-segment-connected networks, it obtains a series of formulae of the band number and width. On the other hand, it proposes a so-called concept of two-segment-connected quantum subsystem and uses it to discuss the complexity of the band structures of QMNs. Based on these formulae, one can dominate the number, width and position of photonic bands within designed frequencies by adjusting the NCWS and MRWL. There would be potential applications for designing optical switches, optical narrow-band filters, dense wavelength-division-multiplexing devices and other correlative waveguide network devices.
