[Objective] The effect of baffled surface flow wetlands on water purification was studied in order to provide a reference for the ecological restoration of polluted river.[Method] Contents of some indexes like DO,TN,T...[Objective] The effect of baffled surface flow wetlands on water purification was studied in order to provide a reference for the ecological restoration of polluted river.[Method] Contents of some indexes like DO,TN,TP,NH＋4-N,CODCr,SS,SD,etc.were determined in the band baffled surface flow wetlands with total area of 7 400 m2 at JiaLu riverside.[Result] Baffled surface flow wetlands could improve the effluent quality significantly,could enhance transparency and dissolved oxygen content and also could decrease SS content.The removal rate of TN was kept at more than 73% in summer and decreased to 23% in early winter;The removal rate of TP was little influenced by temperature,and it was kept at more than 77% in summer and still kept at more than 69% in autumn and winter;The removal rate of NH＋4-N was kept at more than 83% in summer and decreased slightly in autumn and winter,but still kept at more than 75%;The removal rate of CODCr ranged from 14% to 50%.[Conclusion] Baffled surface flow wetlands could effectively improve the purification effect of surface flow wetlands,which is a feasible way for ecological restoration.展开更多
This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle t...This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle that uses a secondary injection to deflect the primary flow and generate a vector angle. The fluid thrust vectoring technology is regarded as a key technology for the development of very low detectable vehicles because of its advantages, such as fast response, lightweight, and good stealth performance. The main objectives of this study are to investigate the effects of various parameters such as slot interval distance, slot width, injection angle, nozzle pressure ratio, secondary flow pressure ratio, and outflow Mach number on the deflection angle, thrust coefficient, thrust efficiency, and secondary flow ratio of the nozzle. The numerical simulations are carried out using the k-epsilon turbulence model, which is validated by comparing it with experimental data. The results indicate that optimizing the slot interval distance and width, increasing the injection angle, adjusting the nozzle pressure ratio and secondary flow pressure ratio, and controlling the outflow Mach number can enhance the nozzle performance. The results also reveal the complex flow phenomena inside the nozzle, such as shock wave interactions, flow separation and reattachment, and boundary layer effects. The study provides a comprehensive understanding of the flow characteristics and performance of a baffled shock two-dimensional vector nozzle and offers some guidance for its design and optimization.展开更多
The feasibility of using anaerobic baffled reactor （ABR） as onsite wastewater treatment system was discussed. The ABR consisted of one sedimentation chamber and three up-flow chambers in series was experimented unde...The feasibility of using anaerobic baffled reactor （ABR） as onsite wastewater treatment system was discussed. The ABR consisted of one sedimentation chamber and three up-flow chambers in series was experimented under different peak flow factors （PFF of 1 to 6）, superficial gas velocities （between 0.6 and 3.1 cm/hr） and hydraulic retention times （HRT） （24, 36 and 48 hr）. Residence time distribution （RTD） analyses were carded out to investigate the hydraulic characteristics of the ABR. It was found that the PFF resulted in hydraulic dead space. The dead space did not exceed 13% at PFF of 1, 2 and 4 while there was 2-fold increase （26%） at PFF of 6. Superficial gas velocities did not result in more （biological） dead space. The mixing pattern of ABR tended to be a completely- mixed reactor when PFF increased. Superficial gas velocities did not affect mixing pattern. The effects of PFF on mixing pattern could be minimized by higher HRT （48 hr）. The tank-in-series （TIS） model （N = 4） was suitable to describe the hydraulic behaviour of the studied system. The HRT of 48 hr was able to maintain the mixing pattern under different flow patterns, introducing satisfactory hydraulic efficiency. Chemical oxygen demand （COD） and total suspended solids （TSS） removals under all flow patterns were achieved more than 85% and 90%, respectively. The standard deviation of effluent COD and TSS concentration did not exceed 15 mg/L.展开更多
To improve the efficiency of the desulfurization process, the drawdown mechanism of light particles in stirred tank is studied in this paper. For both up and down pumping modes, the just drawdown speeds(Njd) of floati...To improve the efficiency of the desulfurization process, the drawdown mechanism of light particles in stirred tank is studied in this paper. For both up and down pumping modes, the just drawdown speeds(Njd) of floating particles in transformative Kanbara Reactor(KR) are measured in one and four baffled stirred tanks experimentally. Then numerical simulations with standard k-ε model coupled with volume of fluid model(VOF) and discrete phase model(DPM) are conducted to analyze the flow field at the just drawdown speed Njd. The torques on the impeller obtained from experiments and simulations agree well with each other, which indicates the validity of our numerical simulations. Based on the simulations, three main drawdown mechanisms for floating particles, the axial circulation, turbulent fluctuation and largescale eddies, are analyzed. It's found that the axial circulation dominates the drawdown process at small submergence(S = 1/4 T and 1/3 T) and the large-scale eddies play a major role at large submergence(S = 2/3 T and 3/4 T). Besides, the turbulent fluctuation affects the drawdown process significantly for up pumping mode at small submergence(S = 1/4 T and 1/3 T) and for down pumping mode at large submergence(S = 2/3 T and 3/4 T). This paper helps to provide a more comprehensive understanding of the KR desulphurizer drawdown process in the baffled stirred tank.展开更多
The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier...The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier anaerobic baffled reactor （CABR） treating dilute wastewater was operated under a wide range of operational conditions, namely, feed strengths of 300-600 mg/L, HRTs of 9- 18 h, and temperatures of 10-28℃. Generally, SMP production increased with increasing feed strength and decreasing temperature. At high temperature （28℃）, SMP production increased with decreasing HRT. As the temperature was decreased to 18 and 10℃, the SMP production was at its peak for 12 h HRT. Therefore, temperature could be an important determinant of SMP production along with HRT. A higher SMP to soluble chemical oxygen demand （SCOD） ratio was found at high temperature and long HRT because of complete volatile fatty acid degradation. SMP accounted for 50%-75% of the SCOD in the last chamber of the CABR. As a secondary metabolite, some SMP could be consumed at lower feed strength.展开更多
The fluid motion in partially filled tanks with internal baffles has wide engineering applications. The installation of baffles is expected to reduce the effect of sloshing as well as the consequent environmental dama...The fluid motion in partially filled tanks with internal baffles has wide engineering applications. The installation of baffles is expected to reduce the effect of sloshing as well as the consequent environmental damages. In the present study, a series of experimental tests are performed to investigate the sloshing phenomenon in a baffled rectangular storage tank. In addition, the sloshing phenomenon is also modeled by using Open Foam. Based on the experimental and numerical studies, optimization of the geometric parameters of the tank is performed based on some criteria such as tank area, entropy generation, and the horizontal force exerted on the tank area due to the sloshing phenomenon.The optimization is also carried out based on the entropy generation minimization analysis. It is noted that the optimum baffle height is in the range of h_b/h_w=0.5-0.75 in the present study(where h_b and h_w are the baffle height and water depth, respectively). Based on the results, the optimal design of the tank is achieved with R_A= 0.9-1.0(where R_A=L/W, L and W are the length and width of the tank, respectively). The results also show that the increase of h_b can lead to a decrease of the maximum pressure and horizontal force exerted on the tank. It is also noted that the horizontal force exerted on the tank firstly continues to increase as the sway motion amplitude increases.However, as the normalized motion amplitude parameter, a/L(The parameter a is the motion amplitude), exceeds0.067, the effect of motion amplitude on the force is not obvious. The same optimization is also performed in the multiple-variable-baffled tank and prismatic storage tank.展开更多
Periodic anaerobic baffled reactor （PABR） is a novel reactor based on the design concept of anaerobic baffled reactor （ABR）. Residence time distribution （RTD） studies on both clean and working reactors at the sa...Periodic anaerobic baffled reactor （PABR） is a novel reactor based on the design concept of anaerobic baffled reactor （ABR）. Residence time distribution （RTD） studies on both clean and working reactors at the same hydraulic residence time （HRT） of 2 d were carded out to investigate the dead spaces and mixing patterns in PABRs at different organic loading rates （OLRs） in various switching manners and frequencies. The results showed that the fraction of dead space in PABR was similar to that in ABR, which was low in comparison with other reactor designs. Dead space may be divided into two categories, hydraulic and biological. In RTD studies without biomass, the hydraulic dead space in the PABR run in an ＂every second＂ switching manner with T = 2 d was the lowest whereas that in the PABR run in a T = ∞ （ABR） switching manner was the highest. The same trend was obtained with the total dead space in RTD studies with biomass no matter what the OLR was. Biological dead space was the major contributor to dead space but affected decreasingly at higher OLR whichever switching manner the PABR run in. The flow patterns within the PABRs were intermediate between plug-flow and perfectly mixed under all the conditions tested,展开更多
Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, a...Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.展开更多
Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, tw...Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, two quadrant baffle schemes, and two continuous helical baffle schemes. The temperature contour or the pressure contour and velocity contour plots with superimposed velocity vectors on meridian, transverse and unfolded concentric hexagonal slices are presented to obtain a full angular view. For the six helix baffled heat exchangers,the different patterns of the single vortex secondary flow and the shortcut leakage flow were depicted as well as the heat transfer properties were compared. The results show that the optimum scheme among the six configurations is a circumferential overlap trisection helix baffled heat exchanger with a baffle incline angle of 20°(20°TCO) scheme with an anti-shortcut baffle structure, which exhibits the second highest pressure dropΔpo, the highest overall heat transfer coefficient K, shell-side heat transfer coefficient hoand shell-side average comprehensive index ho/Δpo.展开更多
A finite difference/boundary integral procedure to determine theacoustic reflected pressure from a fluid-loaded bi-laminated plate isdescribed. The bi-laminate is composed of a piezoelectric layer andan elastic layer ...A finite difference/boundary integral procedure to determine theacoustic reflected pressure from a fluid-loaded bi-laminated plate isdescribed. The bi-laminate is composed of a piezoelectric layer andan elastic layer in contact with the fluid, and is held by anacoustically hard baffle. In the numerical model, the fluid pressureat fluid/solid interface is replaced by a continuum of point sourcesweighted by the normal acceleration of the elastic plate, and thegoverning equation system is solved in the solid domain.展开更多
An anaerobic baffled reactor is a system developed in recent decades and has been used as part of the treatment of high-strength wastewater. Since the function of this system is based on its hydrodynamic features, hyd...An anaerobic baffled reactor is a system developed in recent decades and has been used as part of the treatment of high-strength wastewater. Since the function of this system is based on its hydrodynamic features, hydrodynamics and the regime of the flow through the reactor are crucial. In this study, a prototype reactor with eight chambers, which had a total volume of 48 L, and a model reactor, whose dimensions were half of those of the prototype reactor, were used. The Froude dynamic similitude in these reactors was investigated. The results show that the curve dimensionless variances were 0.089 and 0.096 for the prototype and model reactors, respectively, the short-circuiting indices were 0.483 and 0.489 for the prototype and model reactors, respectively, the effective volume and short-circuiting index measurement errors were both 1%, the hydraulic efficiency error was 2%, and the Peclet and dispersion number errors were both 7%. Most of the compared indices were close to one another in value. Therefore, the model reactor can be used based on the Froude dynamic similitude to determine hydrodynamic charac-teristics of a baffled reactor at a full scale.展开更多
This review discusses high-strength wastewater treatment using anaerobic baffled reactors(ABRs)and modified ABRs.The research findings and applications of ABRs in treating various types of high strength wastewater gen...This review discusses high-strength wastewater treatment using anaerobic baffled reactors(ABRs)and modified ABRs.The research findings and applications of ABRs in treating various types of high strength wastewater generated from food companies,livestock,and industries were summarized and reported.Measurement parameters affecting the performance of ABRs are briefly discussed.The state-of-the-art laboratory studies are compiled and critically reviewed.Critical challenges and suggestions for future investigation are also addressed.展开更多
Anaerobic granular sludge is of key importance for highly effective operation of hybrid anaerobic baffled reactor(HABR).An observation and analysis on the composition of anaerobic granular sludge in each separation co...Anaerobic granular sludge is of key importance for highly effective operation of hybrid anaerobic baffled reactor(HABR).An observation and analysis on the composition of anaerobic granular sludge in each separation compartment of HABR was conducted by using scanning electron microscope(SEM)and molecular biotechnology,and specific methanogenic activity(SMA)and coenzyme F420 content were determined.It was indicated that the disparity of microbial composition was significant among these separation compartments of HABR,and the HABR encouraged phase separation.The results show the understanding of microbiological characteristics of anaerobic granular sludge in HABR is helpful for cultivating granular sludge,which ensures the effective operation of the reactor.展开更多
Flow structure and mixing properties by the baffle shape are numerically studied for a baffled micro combustor. The baffle shape is changed by various fuel and hole sizes. The numerical simulations based on different ...Flow structure and mixing properties by the baffle shape are numerically studied for a baffled micro combustor. The baffle shape is changed by various fuel and hole sizes. The numerical simulations based on different geometric conditions are performed by using the Reynolds Stress Model. The fuel-air mixing is greatly affected by flow recirculations. The centrally located flow recirculation has an important role for the entire mixing performance. The results show that this feature depends on the baffle configurations, and the baffle with small air holes represents efficient characters.展开更多
To meet the rapidly increasing demand for energy and the dramatic depletion of conventional crude oil,it is imperative to utilize sour naphtha.With no coke being produced,oxidative desulfurization(ODS)of naphtha lower...To meet the rapidly increasing demand for energy and the dramatic depletion of conventional crude oil,it is imperative to utilize sour naphtha.With no coke being produced,oxidative desulfurization(ODS)of naphtha lowers its sulfur content and average molecular weight.In this article,we outline a method for heavy naphtha non-extractive ODS using a very stable catalyst.The technique involves the use of a solid catalyst with oxygen gas as the oxidant.This necessitated relatively high mixing intensities;hence a three-phase Oscillatory Baffled Reactor(OBR)was used.The catalyst was based on the zeolite ZSM-5,prepared from natural kaolin by a series of delamination and activation steps and impregnated with Fe.A TiO2 nanolayer was applied,using the sol-gel method,to prevent rapid deactivation.The reactor performance was evaluated to minimize the sulfur content in the naphtha fuel.Due to the protective coating,the sulfur conversion stabilized at 90%.The results of this work establish the use of natural clay-based catalysts in a continuous,three-phase ODS,particularly with regard to proving long-term stability.It also showed that modest ODS can be achieved using an environmentally friendly oxidant,at mild operating conditions,whilst maintaining stability.展开更多
We investigated the performance of a 15.3 L capacity anaerobic baffled reactor （ABR） toward the treatment of low-strength domestic wastewater. The start- up period of the ABR was finished within approximately 130 da...We investigated the performance of a 15.3 L capacity anaerobic baffled reactor （ABR） toward the treatment of low-strength domestic wastewater. The start- up period of the ABR was finished within approximately 130 days at a temperature below 25~C. The average CODcr in the effluent was 165 mg.L 1 and the corresponding CODcr removal efficiency of the ABR was 52.3%. During the third stage （from day 130 to day 233） of ABR operation, the average CODcr in the effluent reached 71 mg· L^-1, which meets the secondary discharge requirement of the Integrated Wastewater Discharge Standard （GB 18918-2002, China）. Moreover, partial microbial separa- tion was observed along the five ABR compartments through scanning electron microscopic images. The geometric mean diameter of bioparticles in the five compartments increased from 0.050 mm to 0.111, 0.107, 0.104, 0.110, and 0.103 mm during the start-up stage. After operation for 179days, the further increased to 0.376, corresponding diameters 0.225, 0.253, 0.239, and 0.288mm, respectively. The fractal dimensions of the bioparticles indicated that these particles have smoother surfaces and more compact structures during ABR operation. Morphological analysis of the bioparticle sections demonstrated that the bioparticles have a pore volume of 30%-55%. The highest porosity was observed for the bioparticles in the second ABR compartment, whereas the lowest fractal dimension ofbioparticle section was observed in the fifth compartment.展开更多
In this paper,single-phase homogeneous nanofluid model is proposed to investigate the natural convection of magneto-hydrodynamic(MIID)flow of Newtonian Cu—H20 nanoliquid in a baffled U-shaped enclosure.The Brinkman m...In this paper,single-phase homogeneous nanofluid model is proposed to investigate the natural convection of magneto-hydrodynamic(MIID)flow of Newtonian Cu—H20 nanoliquid in a baffled U-shaped enclosure.The Brinkman model and Wasp model are considered to measure the effective dynamic viscosity and effective thermal conductivity of the nanoliquid coreespondingly.Nanoliquid's effective properties such as specific heat,density and thermal expansion coefficient are modeled using mixture theory.The complicated PDS(partial differential system)is treated for numeric solutions via the Galerkin finite element method.The pertinent parameters Hartmann number(1≤Ha≤60),Rayleigh number(10^(3)≤Ra≤10^(6))and nanoparticles volume fraction (0% ≤Ф≤4%) are taken for the parametric analysis, and it is conducted via streamlines and isotherms. Excellent agreement between numerical results and open literature. It is ascertained that heat transfer rate enhances with Rayleigh number Ra and volume fraction 0, however it is diminished for laiger Hartmann number Ha.展开更多
A novel hybrid anaerobic-contact oxidation biofilm baffled reactor （HAOBR） was developed to simultaneously remove nitrogenous and carbonaceous organic pollutants from decentralized molasses wastewater in the study. ...A novel hybrid anaerobic-contact oxidation biofilm baffled reactor （HAOBR） was developed to simultaneously remove nitrogenous and carbonaceous organic pollutants from decentralized molasses wastewater in the study. The study was based on the inoculation of anaerobic granule sludge in anaerobic compartments and the installation of combination filler in aerobic compartments. The performance of reactor system was studied regarding the hydraulic retention time （HRT）, microbial characteristics and the gas water ratio （GWR）. When the HRT was 24h and the GWR was 20：1, total ammonia and chemical oxygen demand （COD） of the effluent were reduced by 99% and 91.8%, respectively. The reactor performed stably for treating decentralized molasses wastewater. The good performance of the reactor can be attributed to the high resistance of COD and hydraulic shock loads. In addition, the high solid retention time of contact oxidation biofilm contributed to stable performance of the reactor.展开更多
The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control...The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control during debris flows is crucial but difficult.Herein,an eco-friendly control system featuring anchoring natural boulders(NBs)with(negative Poisson's ratio)NPR anchor cables is proposed to form an NB-NPR baffle.A series of flume experiments are conducted to verify the effect of NB-NPR baffles on controlling debris flow impact.The deployment of NB-NPR baffles substantially influences the kinematic behavior of a debris flow,primarily in the form of changes in the depositional properties and impact intensities.The results show that the NB-NPR baffle matrix successfully controls boulder mobility and exhibits positive feedback on solid particle deposition.The NB-NPR baffle group exhibits a reduction in peak impact force ranging from 29%to 79%compared to that of the control group in the basic experiment.The NPR anchor cables play a significant role in the NB-NPR baffle by demonstrating particular characteristics,including consistent resistance,large deformation,and substantial energy absorption.The NB-NPR baffle innovatively utilizes the natural boulders in a debris flow gully by converting destructive boulders into constructive boulders.Overall,this research serves as a basis for future field experiments and applications.展开更多
To reduce the complexity of mixing systems and improve mixing efficiency,this paper proposes a valveless piezoelectric pump integrated with airfoil baffles,which embodies both active and passive mixing attributes.The ...To reduce the complexity of mixing systems and improve mixing efficiency,this paper proposes a valveless piezoelectric pump integrated with airfoil baffles,which embodies both active and passive mixing attributes.The airfoil baffles are designed using the asymmetric NACA63-412 profile.The impact of the airfoil angle of attack on the flow field within the tube and the output and mixing performance of the piezoelectric pump is investigated.Computational simulations of the tube with airfoil baffle indicated that as the angle of attack increases,the position of vortex generation at the leading and trailing edge regions of the airfoil baffle progressively moves forward in the direction of fluid flow.Then the vortex volume enlarges,and the vortex intensity within the flow field rises.Subsequently,the prototypes of valveless piezoelectric pumps at four different angles of attack are fabricated and their output performances are experimentally evaluated.The results demonstrate that the maximum output flow rate of the pump decreases with an increasing angle of attack.At an angle of attack of 0°,the maximum output flow rate of the pump reaches 225.3 ml/min.Mixing performance experiments are conducted using the piezoelectric pump for the synthesis of Fe_(3)O_(4)particles.The findings indicate that as the angle of attack increases,the number of Fe_(3)O_(4)particles formed in the mixture significantly rises,with a narrower particle size distribution and more regular morphology.At an angle of attack of 15°,the synthesized Fe_(3)O_(4)particles have an approximate diameter of 10μm.The outcomes of this paper offer valuable insights for the design of microfluidic systems,catering to the demands of material synthesis,chemistry,and biomedical applications.展开更多
基金Supported by Deep Purification Technology Project of Mixed Mode Wetland for Sewage Plant Waster Water in Dryland(2006AA6Z325)~~
文摘[Objective] The effect of baffled surface flow wetlands on water purification was studied in order to provide a reference for the ecological restoration of polluted river.[Method] Contents of some indexes like DO,TN,TP,NH＋4-N,CODCr,SS,SD,etc.were determined in the band baffled surface flow wetlands with total area of 7 400 m2 at JiaLu riverside.[Result] Baffled surface flow wetlands could improve the effluent quality significantly,could enhance transparency and dissolved oxygen content and also could decrease SS content.The removal rate of TN was kept at more than 73% in summer and decreased to 23% in early winter;The removal rate of TP was little influenced by temperature,and it was kept at more than 77% in summer and still kept at more than 69% in autumn and winter;The removal rate of NH＋4-N was kept at more than 83% in summer and decreased slightly in autumn and winter,but still kept at more than 75%;The removal rate of CODCr ranged from 14% to 50%.[Conclusion] Baffled surface flow wetlands could effectively improve the purification effect of surface flow wetlands,which is a feasible way for ecological restoration.
文摘This research paper presents a numerical study on the flow characteristics and performance of a baffled shock two-dimensional vector nozzle. The baffled shock vector nozzle is a type of fluid thrust vectoring nozzle that uses a secondary injection to deflect the primary flow and generate a vector angle. The fluid thrust vectoring technology is regarded as a key technology for the development of very low detectable vehicles because of its advantages, such as fast response, lightweight, and good stealth performance. The main objectives of this study are to investigate the effects of various parameters such as slot interval distance, slot width, injection angle, nozzle pressure ratio, secondary flow pressure ratio, and outflow Mach number on the deflection angle, thrust coefficient, thrust efficiency, and secondary flow ratio of the nozzle. The numerical simulations are carried out using the k-epsilon turbulence model, which is validated by comparing it with experimental data. The results indicate that optimizing the slot interval distance and width, increasing the injection angle, adjusting the nozzle pressure ratio and secondary flow pressure ratio, and controlling the outflow Mach number can enhance the nozzle performance. The results also reveal the complex flow phenomena inside the nozzle, such as shock wave interactions, flow separation and reattachment, and boundary layer effects. The study provides a comprehensive understanding of the flow characteristics and performance of a baffled shock two-dimensional vector nozzle and offers some guidance for its design and optimization.
基金supported by the Swiss National Centre of Competence in Research (NCCR) North-South:Research Partnerships for Mitigating Syndromes of Global Change, and the Swiss National Science Foundation and the Swiss Agency for Development and Cooperation
文摘The feasibility of using anaerobic baffled reactor （ABR） as onsite wastewater treatment system was discussed. The ABR consisted of one sedimentation chamber and three up-flow chambers in series was experimented under different peak flow factors （PFF of 1 to 6）, superficial gas velocities （between 0.6 and 3.1 cm/hr） and hydraulic retention times （HRT） （24, 36 and 48 hr）. Residence time distribution （RTD） analyses were carded out to investigate the hydraulic characteristics of the ABR. It was found that the PFF resulted in hydraulic dead space. The dead space did not exceed 13% at PFF of 1, 2 and 4 while there was 2-fold increase （26%） at PFF of 6. Superficial gas velocities did not result in more （biological） dead space. The mixing pattern of ABR tended to be a completely- mixed reactor when PFF increased. Superficial gas velocities did not affect mixing pattern. The effects of PFF on mixing pattern could be minimized by higher HRT （48 hr）. The tank-in-series （TIS） model （N = 4） was suitable to describe the hydraulic behaviour of the studied system. The HRT of 48 hr was able to maintain the mixing pattern under different flow patterns, introducing satisfactory hydraulic efficiency. Chemical oxygen demand （COD） and total suspended solids （TSS） removals under all flow patterns were achieved more than 85% and 90%, respectively. The standard deviation of effluent COD and TSS concentration did not exceed 15 mg/L.
基金Supported by the National Natural Science Foundation of China(51474109,51609090,51679097)the Science Research Project of Huazhong University of Science and Technology(0118140077,2006140115)
文摘To improve the efficiency of the desulfurization process, the drawdown mechanism of light particles in stirred tank is studied in this paper. For both up and down pumping modes, the just drawdown speeds(Njd) of floating particles in transformative Kanbara Reactor(KR) are measured in one and four baffled stirred tanks experimentally. Then numerical simulations with standard k-ε model coupled with volume of fluid model(VOF) and discrete phase model(DPM) are conducted to analyze the flow field at the just drawdown speed Njd. The torques on the impeller obtained from experiments and simulations agree well with each other, which indicates the validity of our numerical simulations. Based on the simulations, three main drawdown mechanisms for floating particles, the axial circulation, turbulent fluctuation and largescale eddies, are analyzed. It's found that the axial circulation dominates the drawdown process at small submergence(S = 1/4 T and 1/3 T) and the large-scale eddies play a major role at large submergence(S = 2/3 T and 3/4 T). Besides, the turbulent fluctuation affects the drawdown process significantly for up pumping mode at small submergence(S = 1/4 T and 1/3 T) and for down pumping mode at large submergence(S = 2/3 T and 3/4 T). This paper helps to provide a more comprehensive understanding of the KR desulphurizer drawdown process in the baffled stirred tank.
文摘The effects of feed strength, hydraulic residence time （HRT）, and operational temperatures on soluble microbial product （SMP） production were investigated, to gain insights into the production mechanism. A carrier anaerobic baffled reactor （CABR） treating dilute wastewater was operated under a wide range of operational conditions, namely, feed strengths of 300-600 mg/L, HRTs of 9- 18 h, and temperatures of 10-28℃. Generally, SMP production increased with increasing feed strength and decreasing temperature. At high temperature （28℃）, SMP production increased with decreasing HRT. As the temperature was decreased to 18 and 10℃, the SMP production was at its peak for 12 h HRT. Therefore, temperature could be an important determinant of SMP production along with HRT. A higher SMP to soluble chemical oxygen demand （SCOD） ratio was found at high temperature and long HRT because of complete volatile fatty acid degradation. SMP accounted for 50%-75% of the SCOD in the last chamber of the CABR. As a secondary metabolite, some SMP could be consumed at lower feed strength.
基金inancially supported by the National Natural Science Foundation of China (Grant No. 51761135011)Joint supported by NSFC and Royal Society (Grant No. 52011530183)。
文摘The fluid motion in partially filled tanks with internal baffles has wide engineering applications. The installation of baffles is expected to reduce the effect of sloshing as well as the consequent environmental damages. In the present study, a series of experimental tests are performed to investigate the sloshing phenomenon in a baffled rectangular storage tank. In addition, the sloshing phenomenon is also modeled by using Open Foam. Based on the experimental and numerical studies, optimization of the geometric parameters of the tank is performed based on some criteria such as tank area, entropy generation, and the horizontal force exerted on the tank area due to the sloshing phenomenon.The optimization is also carried out based on the entropy generation minimization analysis. It is noted that the optimum baffle height is in the range of h_b/h_w=0.5-0.75 in the present study(where h_b and h_w are the baffle height and water depth, respectively). Based on the results, the optimal design of the tank is achieved with R_A= 0.9-1.0(where R_A=L/W, L and W are the length and width of the tank, respectively). The results also show that the increase of h_b can lead to a decrease of the maximum pressure and horizontal force exerted on the tank. It is also noted that the horizontal force exerted on the tank firstly continues to increase as the sway motion amplitude increases.However, as the normalized motion amplitude parameter, a/L(The parameter a is the motion amplitude), exceeds0.067, the effect of motion amplitude on the force is not obvious. The same optimization is also performed in the multiple-variable-baffled tank and prismatic storage tank.
基金Project supported by the Hi-Tech Research and Development Program (863) of China (No.2002AA601310).
文摘Periodic anaerobic baffled reactor （PABR） is a novel reactor based on the design concept of anaerobic baffled reactor （ABR）. Residence time distribution （RTD） studies on both clean and working reactors at the same hydraulic residence time （HRT） of 2 d were carded out to investigate the dead spaces and mixing patterns in PABRs at different organic loading rates （OLRs） in various switching manners and frequencies. The results showed that the fraction of dead space in PABR was similar to that in ABR, which was low in comparison with other reactor designs. Dead space may be divided into two categories, hydraulic and biological. In RTD studies without biomass, the hydraulic dead space in the PABR run in an ＂every second＂ switching manner with T = 2 d was the lowest whereas that in the PABR run in a T = ∞ （ABR） switching manner was the highest. The same trend was obtained with the total dead space in RTD studies with biomass no matter what the OLR was. Biological dead space was the major contributor to dead space but affected decreasingly at higher OLR whichever switching manner the PABR run in. The flow patterns within the PABRs were intermediate between plug-flow and perfectly mixed under all the conditions tested,
基金project supported by the Science and Technology Department of Zhejiang Province (2005C13003).
文摘Objective To examine the effect of hydraulic residence time （HRT） on the performance and stability, to treat dilute wastewater at different operational temperatures in a carrier anaerobic baffled reactor （CABR）, and hence to gain a deeper insight into microbial responses to hydraulic shocks on the base of the relationships among macroscopic performance, catabolic intermediate, and microcosmic alternation. Methods COD, VFAs, and microbial activity were detected with constant feed strength （300 mg/L） at different HRTs （9-18 h） and temperatures （10℃-28℃） in a CABR. Results The removal efficiencies declined with the decreases of HRTs and temperatures. However, the COD removal load was still higher at short HRT than at long HRT. Devastating reactor performance happened at temperature of 10℃ and at HRT of 9 h. HRTs had effect on the VFAs in the reactor slightly both at high and low temperatures, but the reasons differed from each other. Microbial activity was sensitive to indicate changes of environmental and operational parameters in the reactor. Conclusion The CABR offers to certain extent an application to treat dilute wastewater under a hydraulic-shock at temperatures from 10℃to 28℃.
基金Supported by the National Natural Science Foundation of China(50976022,51276035)the Provincial Science and Technology Innovation and Transformation of Achievements of Special Fund Project of Jiangsu Province(BY2011155)
文摘Numerical simulations were performed on flow and heat transfer performances of heat exchangers having six helical baffles of different baffle shapes and assembly configurations, i.e., two trisection baffle schemes, two quadrant baffle schemes, and two continuous helical baffle schemes. The temperature contour or the pressure contour and velocity contour plots with superimposed velocity vectors on meridian, transverse and unfolded concentric hexagonal slices are presented to obtain a full angular view. For the six helix baffled heat exchangers,the different patterns of the single vortex secondary flow and the shortcut leakage flow were depicted as well as the heat transfer properties were compared. The results show that the optimum scheme among the six configurations is a circumferential overlap trisection helix baffled heat exchanger with a baffle incline angle of 20°(20°TCO) scheme with an anti-shortcut baffle structure, which exhibits the second highest pressure dropΔpo, the highest overall heat transfer coefficient K, shell-side heat transfer coefficient hoand shell-side average comprehensive index ho/Δpo.
基金the National Natural Science Foundation of China (No.10172039).
文摘A finite difference/boundary integral procedure to determine theacoustic reflected pressure from a fluid-loaded bi-laminated plate isdescribed. The bi-laminate is composed of a piezoelectric layer andan elastic layer in contact with the fluid, and is held by anacoustically hard baffle. In the numerical model, the fluid pressureat fluid/solid interface is replaced by a continuum of point sourcesweighted by the normal acceleration of the elastic plate, and thegoverning equation system is solved in the solid domain.
文摘An anaerobic baffled reactor is a system developed in recent decades and has been used as part of the treatment of high-strength wastewater. Since the function of this system is based on its hydrodynamic features, hydrodynamics and the regime of the flow through the reactor are crucial. In this study, a prototype reactor with eight chambers, which had a total volume of 48 L, and a model reactor, whose dimensions were half of those of the prototype reactor, were used. The Froude dynamic similitude in these reactors was investigated. The results show that the curve dimensionless variances were 0.089 and 0.096 for the prototype and model reactors, respectively, the short-circuiting indices were 0.483 and 0.489 for the prototype and model reactors, respectively, the effective volume and short-circuiting index measurement errors were both 1%, the hydraulic efficiency error was 2%, and the Peclet and dispersion number errors were both 7%. Most of the compared indices were close to one another in value. Therefore, the model reactor can be used based on the Froude dynamic similitude to determine hydrodynamic charac-teristics of a baffled reactor at a full scale.
文摘This review discusses high-strength wastewater treatment using anaerobic baffled reactors(ABRs)and modified ABRs.The research findings and applications of ABRs in treating various types of high strength wastewater generated from food companies,livestock,and industries were summarized and reported.Measurement parameters affecting the performance of ABRs are briefly discussed.The state-of-the-art laboratory studies are compiled and critically reviewed.Critical challenges and suggestions for future investigation are also addressed.
基金Innovation Foundation of Donghua University for PhD Candidates,China(No.BC200828)Shanghai Leading Academic Discipline Project,China(No.B064)
文摘Anaerobic granular sludge is of key importance for highly effective operation of hybrid anaerobic baffled reactor(HABR).An observation and analysis on the composition of anaerobic granular sludge in each separation compartment of HABR was conducted by using scanning electron microscope(SEM)and molecular biotechnology,and specific methanogenic activity(SMA)and coenzyme F420 content were determined.It was indicated that the disparity of microbial composition was significant among these separation compartments of HABR,and the HABR encouraged phase separation.The results show the understanding of microbiological characteristics of anaerobic granular sludge in HABR is helpful for cultivating granular sludge,which ensures the effective operation of the reactor.
文摘Flow structure and mixing properties by the baffle shape are numerically studied for a baffled micro combustor. The baffle shape is changed by various fuel and hole sizes. The numerical simulations based on different geometric conditions are performed by using the Reynolds Stress Model. The fuel-air mixing is greatly affected by flow recirculations. The centrally located flow recirculation has an important role for the entire mixing performance. The results show that this feature depends on the baffle configurations, and the baffle with small air holes represents efficient characters.
基金supported by a grant from Petroleum Research and Development Center,Ministry of Oil,Iraq(No.304/16/1/2022).
文摘To meet the rapidly increasing demand for energy and the dramatic depletion of conventional crude oil,it is imperative to utilize sour naphtha.With no coke being produced,oxidative desulfurization(ODS)of naphtha lowers its sulfur content and average molecular weight.In this article,we outline a method for heavy naphtha non-extractive ODS using a very stable catalyst.The technique involves the use of a solid catalyst with oxygen gas as the oxidant.This necessitated relatively high mixing intensities;hence a three-phase Oscillatory Baffled Reactor(OBR)was used.The catalyst was based on the zeolite ZSM-5,prepared from natural kaolin by a series of delamination and activation steps and impregnated with Fe.A TiO2 nanolayer was applied,using the sol-gel method,to prevent rapid deactivation.The reactor performance was evaluated to minimize the sulfur content in the naphtha fuel.Due to the protective coating,the sulfur conversion stabilized at 90%.The results of this work establish the use of natural clay-based catalysts in a continuous,three-phase ODS,particularly with regard to proving long-term stability.It also showed that modest ODS can be achieved using an environmentally friendly oxidant,at mild operating conditions,whilst maintaining stability.
基金Acknowledgements This work was supported by the Fundamental Research Funds for the Central Universities （Nos. JC2011-1 and TD2010- 5）, Major projects on control and rectification of water body pollution （No. 2008ZX07314-006-02）, the National Natural Science Foundation of China （Grant Nos. 51078035 and 21177010）, and the Ph.D. Programs Foundation of the Ministry of Education of China （No. 20100014110004）.
文摘We investigated the performance of a 15.3 L capacity anaerobic baffled reactor （ABR） toward the treatment of low-strength domestic wastewater. The start- up period of the ABR was finished within approximately 130 days at a temperature below 25~C. The average CODcr in the effluent was 165 mg.L 1 and the corresponding CODcr removal efficiency of the ABR was 52.3%. During the third stage （from day 130 to day 233） of ABR operation, the average CODcr in the effluent reached 71 mg· L^-1, which meets the secondary discharge requirement of the Integrated Wastewater Discharge Standard （GB 18918-2002, China）. Moreover, partial microbial separa- tion was observed along the five ABR compartments through scanning electron microscopic images. The geometric mean diameter of bioparticles in the five compartments increased from 0.050 mm to 0.111, 0.107, 0.104, 0.110, and 0.103 mm during the start-up stage. After operation for 179days, the further increased to 0.376, corresponding diameters 0.225, 0.253, 0.239, and 0.288mm, respectively. The fractal dimensions of the bioparticles indicated that these particles have smoother surfaces and more compact structures during ABR operation. Morphological analysis of the bioparticle sections demonstrated that the bioparticles have a pore volume of 30%-55%. The highest porosity was observed for the bioparticles in the second ABR compartment, whereas the lowest fractal dimension ofbioparticle section was observed in the fifth compartment.
基金the Algerian Ministry of Higher Education and Scientific Research through PRFU project no B00L02UN210120180002the General Directorate of Scientific Research and Technological Development(DGRSDT),Algeria.
文摘In this paper,single-phase homogeneous nanofluid model is proposed to investigate the natural convection of magneto-hydrodynamic(MIID)flow of Newtonian Cu—H20 nanoliquid in a baffled U-shaped enclosure.The Brinkman model and Wasp model are considered to measure the effective dynamic viscosity and effective thermal conductivity of the nanoliquid coreespondingly.Nanoliquid's effective properties such as specific heat,density and thermal expansion coefficient are modeled using mixture theory.The complicated PDS(partial differential system)is treated for numeric solutions via the Galerkin finite element method.The pertinent parameters Hartmann number(1≤Ha≤60),Rayleigh number(10^(3)≤Ra≤10^(6))and nanoparticles volume fraction (0% ≤Ф≤4%) are taken for the parametric analysis, and it is conducted via streamlines and isotherms. Excellent agreement between numerical results and open literature. It is ascertained that heat transfer rate enhances with Rayleigh number Ra and volume fraction 0, however it is diminished for laiger Hartmann number Ha.
基金This research was supported by the National High Technology Research and Development Program of China （Grant No. 2012BAJ21B04） and the National Natural Science Foundation of China （Grant No. 51108436）.
文摘A novel hybrid anaerobic-contact oxidation biofilm baffled reactor （HAOBR） was developed to simultaneously remove nitrogenous and carbonaceous organic pollutants from decentralized molasses wastewater in the study. The study was based on the inoculation of anaerobic granule sludge in anaerobic compartments and the installation of combination filler in aerobic compartments. The performance of reactor system was studied regarding the hydraulic retention time （HRT）, microbial characteristics and the gas water ratio （GWR）. When the HRT was 24h and the GWR was 20：1, total ammonia and chemical oxygen demand （COD） of the effluent were reduced by 99% and 91.8%, respectively. The reactor performed stably for treating decentralized molasses wastewater. The good performance of the reactor can be attributed to the high resistance of COD and hydraulic shock loads. In addition, the high solid retention time of contact oxidation biofilm contributed to stable performance of the reactor.
基金financial support from the National Natural Science Foundation of China(Grant No.41941018).
文摘The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control during debris flows is crucial but difficult.Herein,an eco-friendly control system featuring anchoring natural boulders(NBs)with(negative Poisson's ratio)NPR anchor cables is proposed to form an NB-NPR baffle.A series of flume experiments are conducted to verify the effect of NB-NPR baffles on controlling debris flow impact.The deployment of NB-NPR baffles substantially influences the kinematic behavior of a debris flow,primarily in the form of changes in the depositional properties and impact intensities.The results show that the NB-NPR baffle matrix successfully controls boulder mobility and exhibits positive feedback on solid particle deposition.The NB-NPR baffle group exhibits a reduction in peak impact force ranging from 29%to 79%compared to that of the control group in the basic experiment.The NPR anchor cables play a significant role in the NB-NPR baffle by demonstrating particular characteristics,including consistent resistance,large deformation,and substantial energy absorption.The NB-NPR baffle innovatively utilizes the natural boulders in a debris flow gully by converting destructive boulders into constructive boulders.Overall,this research serves as a basis for future field experiments and applications.
基金supported by the National Natural Science Foundation of China(Nos.51605200,52206045)。
文摘To reduce the complexity of mixing systems and improve mixing efficiency,this paper proposes a valveless piezoelectric pump integrated with airfoil baffles,which embodies both active and passive mixing attributes.The airfoil baffles are designed using the asymmetric NACA63-412 profile.The impact of the airfoil angle of attack on the flow field within the tube and the output and mixing performance of the piezoelectric pump is investigated.Computational simulations of the tube with airfoil baffle indicated that as the angle of attack increases,the position of vortex generation at the leading and trailing edge regions of the airfoil baffle progressively moves forward in the direction of fluid flow.Then the vortex volume enlarges,and the vortex intensity within the flow field rises.Subsequently,the prototypes of valveless piezoelectric pumps at four different angles of attack are fabricated and their output performances are experimentally evaluated.The results demonstrate that the maximum output flow rate of the pump decreases with an increasing angle of attack.At an angle of attack of 0°,the maximum output flow rate of the pump reaches 225.3 ml/min.Mixing performance experiments are conducted using the piezoelectric pump for the synthesis of Fe_(3)O_(4)particles.The findings indicate that as the angle of attack increases,the number of Fe_(3)O_(4)particles formed in the mixture significantly rises,with a narrower particle size distribution and more regular morphology.At an angle of attack of 15°,the synthesized Fe_(3)O_(4)particles have an approximate diameter of 10μm.The outcomes of this paper offer valuable insights for the design of microfluidic systems,catering to the demands of material synthesis,chemistry,and biomedical applications.
