We evaluated,for the first time in Turkey,the productivity of a feller buncher during clear-cut operations of two Brutian pine stands located in Canakkale,northwestern Turkey with different diameter classes and terrai...We evaluated,for the first time in Turkey,the productivity of a feller buncher during clear-cut operations of two Brutian pine stands located in Canakkale,northwestern Turkey with different diameter classes and terrain conditions.In the first stand with 24.6 cm average DBH,the feller buncher cut full trees and moved them to roadside.In the second stand with 34.3 cm average DBH,the feller buncher cut trees in two stages due to their larger diameters and the relatively steep and rough terrain conditions of the site.The effects of specific stand features,DBH and tree height measurements were assessed through statistical analysis in relation to productivity.The results indicate that the average productivity for the first stand was about 118 m^3h^-1,while it was about 80 m3h-1 in the second stand.Even though tree diameter and volume were higher in the second stand,productivity decreased by32.3%due to extra time spent on the two-stage cutting operation.The results revealed that harvesting operations should be planned carefully and the right equipment selected by accounting for different tree sizes,terrain conditions and machine specifications in order to better understand their effects on production.展开更多
At least two bunchers are needed in the 3 MeV H^- Medium Energy Beam Transport （MEBT） line located between RFQ and DTL for the CSNS （China Spallation Neutron Source）. A nose-cone geometry has been adopted as the t...At least two bunchers are needed in the 3 MeV H^- Medium Energy Beam Transport （MEBT） line located between RFQ and DTL for the CSNS （China Spallation Neutron Source）. A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity, higher impedance and lower risk of multipacting. By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH, the thermal and structural analyses have been carried out, the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented, the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.展开更多
Generally, a standard bunching system is composed by an SW pre-buncher, a TW buncher and a standard accelerating section. However, there is one way to simplify the whole system to some extent by using the hybrid bunch...Generally, a standard bunching system is composed by an SW pre-buncher, a TW buncher and a standard accelerating section. However, there is one way to simplify the whole system to some extent by using the hybrid buncher, which is a combined structure of the SW pre-buncher and the TW buncher. Here the beam dynamics studies on an S-band bunching system with the hybrid buncher is presented, and simulation results show that similar beam performance can be obtained at the linac exit by using this kind of bunching system rather than the standard one. In the meantime, the structure design of the hybrid buncher is also described. Furthermore, the standard accelerating section can also be integrated with the hybrid buncher, which can further simplify the usual bunching system and lower the construction cost.展开更多
During the design process, multipacting effect has been taken into consideration using a 2D simulation code MultiPac and all of the corners are rounded to suppress the multipacting effect in the pill-box cavity. Howev...During the design process, multipacting effect has been taken into consideration using a 2D simulation code MultiPac and all of the corners are rounded to suppress the multipacting effect in the pill-box cavity. However, unexpected multipacting effect prevents the increase of the input power when the magnetic field of focusing coils is added after adequate conditioning and a novel method is adopted to suppress it by introducing extra coils to counteract the field. This paper focuses on the simulation of multipacting effect in different magnetic field configurations. The experimental observations and simulation results of multipacting effect are presented and details of the multipacting process are also analyzed.展开更多
A re-buncher with spiral arms for a heavy ion linear accelerator named as SSC-LINAC at HIRFL （the heavy ion research facility of Lanzhou） has been constructed. The re-buncher, which is used for beam longitudinal mod...A re-buncher with spiral arms for a heavy ion linear accelerator named as SSC-LINAC at HIRFL （the heavy ion research facility of Lanzhou） has been constructed. The re-buncher, which is used for beam longitudinal modulation and matching between the RFQ and DTL, is designed to be operated in continuous wave （CW） mode at the Medium-Energy Beam-Transport （MEBT） line to maintain the beam intensity and quality. Because of the longitudinal space limitation, the re-buncher has to be very compact and will be built with four gaps. We determined the key parameters of the re-buncher cavity from the simulations using Microwave Studio software, such as the resonant frequency, the quality factor Q and the shunt impedance. The detailed design of a 53.667 MHz spiral cavity and measurement results of its prototype will be presented.展开更多
设计了一种用于S波段、工作带宽10%的相对论速调管放大器结构。该宽带管采用多间隙输入腔、两个中间腔和重叠模双间隙输出腔来拓展相对论速调管放大器(RKA)群聚段和输出段的带宽,模拟得到基波调制深度大于80%时,RKA群聚段和输出段的带...设计了一种用于S波段、工作带宽10%的相对论速调管放大器结构。该宽带管采用多间隙输入腔、两个中间腔和重叠模双间隙输出腔来拓展相对论速调管放大器(RKA)群聚段和输出段的带宽,模拟得到基波调制深度大于80%时,RKA群聚段和输出段的带宽分别为11%和15%。整管模拟时,通过调节注入微波频率和功率,得到最大功率1.58 GW、3 d B相对工作带宽10%、带内微波功率不小于1 GW的输出微波。展开更多
文章根据脉冲化系统中切割器和聚束器的工作原理,基于蒙特卡罗方法编制了计算程序,数值模拟了带电粒子束流在脉冲化系统中的运动轨迹。通过分析模拟计算的结果可知,采用非等间距速度调制间隙的聚束器,可以有效地提高纳秒脉冲化系统的性...文章根据脉冲化系统中切割器和聚束器的工作原理,基于蒙特卡罗方法编制了计算程序,数值模拟了带电粒子束流在脉冲化系统中的运动轨迹。通过分析模拟计算的结果可知,采用非等间距速度调制间隙的聚束器,可以有效地提高纳秒脉冲化系统的性能指标,所产生束流的脉冲半高宽(full width at half maximum,FWHM)比传统等间距速度调制间隙聚束器的减小了约10%。展开更多
文摘We evaluated,for the first time in Turkey,the productivity of a feller buncher during clear-cut operations of two Brutian pine stands located in Canakkale,northwestern Turkey with different diameter classes and terrain conditions.In the first stand with 24.6 cm average DBH,the feller buncher cut full trees and moved them to roadside.In the second stand with 34.3 cm average DBH,the feller buncher cut trees in two stages due to their larger diameters and the relatively steep and rough terrain conditions of the site.The effects of specific stand features,DBH and tree height measurements were assessed through statistical analysis in relation to productivity.The results indicate that the average productivity for the first stand was about 118 m^3h^-1,while it was about 80 m3h-1 in the second stand.Even though tree diameter and volume were higher in the second stand,productivity decreased by32.3%due to extra time spent on the two-stage cutting operation.The results revealed that harvesting operations should be planned carefully and the right equipment selected by accounting for different tree sizes,terrain conditions and machine specifications in order to better understand their effects on production.
文摘At least two bunchers are needed in the 3 MeV H^- Medium Energy Beam Transport （MEBT） line located between RFQ and DTL for the CSNS （China Spallation Neutron Source）. A nose-cone geometry has been adopted as the type of buncher cavity for its simplicity, higher impedance and lower risk of multipacting. By making use of the results got from the simulations on the buncher with two-dimension code SUPERFISH, the thermal and structural analyses have been carried out, the process and results to determine the resulting frequency shift due to thermal and structural distortion of the cavity are presented, the water-cooling channel position and the optimum cooling water temperature as well as the tuning method by adjusting the cooling water temperature when the cavity is out of resonance are also determined through the analyses.
基金Supported by National Natural Science Foundation of China(11275222)
文摘Generally, a standard bunching system is composed by an SW pre-buncher, a TW buncher and a standard accelerating section. However, there is one way to simplify the whole system to some extent by using the hybrid buncher, which is a combined structure of the SW pre-buncher and the TW buncher. Here the beam dynamics studies on an S-band bunching system with the hybrid buncher is presented, and simulation results show that similar beam performance can be obtained at the linac exit by using this kind of bunching system rather than the standard one. In the meantime, the structure design of the hybrid buncher is also described. Furthermore, the standard accelerating section can also be integrated with the hybrid buncher, which can further simplify the usual bunching system and lower the construction cost.
文摘During the design process, multipacting effect has been taken into consideration using a 2D simulation code MultiPac and all of the corners are rounded to suppress the multipacting effect in the pill-box cavity. However, unexpected multipacting effect prevents the increase of the input power when the magnetic field of focusing coils is added after adequate conditioning and a novel method is adopted to suppress it by introducing extra coils to counteract the field. This paper focuses on the simulation of multipacting effect in different magnetic field configurations. The experimental observations and simulation results of multipacting effect are presented and details of the multipacting process are also analyzed.
基金Supported by Pioneering and Interdisciplinary Research of Big Sciences (Y115210YQ0)
文摘A re-buncher with spiral arms for a heavy ion linear accelerator named as SSC-LINAC at HIRFL （the heavy ion research facility of Lanzhou） has been constructed. The re-buncher, which is used for beam longitudinal modulation and matching between the RFQ and DTL, is designed to be operated in continuous wave （CW） mode at the Medium-Energy Beam-Transport （MEBT） line to maintain the beam intensity and quality. Because of the longitudinal space limitation, the re-buncher has to be very compact and will be built with four gaps. We determined the key parameters of the re-buncher cavity from the simulations using Microwave Studio software, such as the resonant frequency, the quality factor Q and the shunt impedance. The detailed design of a 53.667 MHz spiral cavity and measurement results of its prototype will be presented.
文摘设计了一种用于S波段、工作带宽10%的相对论速调管放大器结构。该宽带管采用多间隙输入腔、两个中间腔和重叠模双间隙输出腔来拓展相对论速调管放大器(RKA)群聚段和输出段的带宽,模拟得到基波调制深度大于80%时,RKA群聚段和输出段的带宽分别为11%和15%。整管模拟时,通过调节注入微波频率和功率,得到最大功率1.58 GW、3 d B相对工作带宽10%、带内微波功率不小于1 GW的输出微波。
文摘文章根据脉冲化系统中切割器和聚束器的工作原理,基于蒙特卡罗方法编制了计算程序,数值模拟了带电粒子束流在脉冲化系统中的运动轨迹。通过分析模拟计算的结果可知,采用非等间距速度调制间隙的聚束器,可以有效地提高纳秒脉冲化系统的性能指标,所产生束流的脉冲半高宽(full width at half maximum,FWHM)比传统等间距速度调制间隙聚束器的减小了约10%。
