For the development of an integrated rounded rectangular wellhead platform with a bucket foundation,a model test was conducted to study the towing motion response of such a structure under still water and wave conditi...For the development of an integrated rounded rectangular wellhead platform with a bucket foundation,a model test was conducted to study the towing motion response of such a structure under still water and wave conditions.The influence of various factors on the floating stability of the structure was investigated through alterations of the towing conditions(draft,towing point position,and wave conditions),and the related influencing mechanism was analyzed.Comparison and analysis were performed to determine the changes in the structure motion pattern and various effects of towing conditions on the structure during towing in still water and regular waves.Moreover,the influence of each factor on the structure’s motion response during towing was analyzed using the Apriori algorithm.In addition,for the simulation of the towing process under actual sea conditions,a towing test was performed under irregular waves,and the stability of towing in irregular waves was compared with that in regular waves.展开更多
The composite bucket foundations of offshore wind turbines penetrate minimally into the seabed, making local scour a significant threat to wind turbine stability. This study develops a physical model to examine local ...The composite bucket foundations of offshore wind turbines penetrate minimally into the seabed, making local scour a significant threat to wind turbine stability. This study develops a physical model to examine local scour patterns around a novel mono-column composite bucket foundation(MCCBF) under unidirectional flows. The experiments reveal that under weak-flow conditions, no significant scour pits develop at the front or lateral sides of the MCCBF,while two distinct scour pits form behind the lateral sides. Under strong-flow conditions, substantial scour pits emerge at both frontal and lateral sides of the bucket foundation, with two scour pits extending downstream on either side. The research demonstrates that both the range and depth of local scour increase with higher flow velocity and decreasing water depth, though the mechanisms influencing local scour around the MCCBF prove more complex than those affecting monopiles. The distinctive structural features of the MCCBF necessitate particular consideration of effects related to bucket foundation exposure. The study concludes by proposing an empirical formula for predicting maximum scour depth around the MCCBF.展开更多
In order to study the towing dynamic properties of the large-scale composite bucket foundation the hydrodynamic software MOSES is used to simulate the dynamic motion of the foundation towed to the construction site.Th...In order to study the towing dynamic properties of the large-scale composite bucket foundation the hydrodynamic software MOSES is used to simulate the dynamic motion of the foundation towed to the construction site.The MOSES model with the prototype size is established as the water draft of 5 and 6 m under the environmental conditions on site.The related factors such as towing force displacement towing accelerations in six degrees of freedom of the bucket foundation and air pressures inside the bucket are analyzed in detail.In addition the towing point and wave conditions are set as the critical factors to simulate the limit conditions of the stable dynamic characteristics.The results show that the large-scale composite bucket foundation with reasonable subdivisions inside the bucket has the satisfying floating stability.During the towing process the air pressures inside the bucket obviously change little and it is found that the towing point at the waterline is the most optimal choice.The characteristics of the foundation with the self-floating towing technique are competitive for saving lots of cost with few of the expensive types of equipment required during the towing transportation.展开更多
In 2010,the first offshore wind turbine with integrated installation was established in Qidong sea area of Jiangsu Province,China,which led to the implementation phase of one-step-installation technique based on the d...In 2010,the first offshore wind turbine with integrated installation was established in Qidong sea area of Jiangsu Province,China,which led to the implementation phase of one-step-installation technique based on the design and construction of large-scale bucket-top-bearing (LSBTB) bucket foundation.The critical technique of LSBTB bucket foundation included self-floating towing,penetration with adjustment of horizontal levelness,removability and one-step-installation.The process of one-step-installation included the prefabrication of LSBTB bucket foundation in onshore construction base,installation and debugging of wind power,overall water transportation of foundation and wind power system,and installation of foundation and offshore wind turbine on the appointed sea area.The cost of one-step-installation technique was about 5 000 Yuan/kW,which was 30%-50% lower than that of the existing technique.The prefabrication of LSBTB bucket foundation took about two months.During the one-step-installation process,the installation and debugging of wind power and overall water transportation need about one to two days in sea area within 35 m depth.After the proposed technique is industrialized,the cost will be further reduced,and the installation capacity is expected to be up to 500 wind turbines per year.展开更多
As a novel type of foundation in beach and shallow sea, the bucket structure is especially suitable for complex conditions such as soft clay ground and the worse types of sea environments. In this paper, the bearing c...As a novel type of foundation in beach and shallow sea, the bucket structure is especially suitable for complex conditions such as soft clay ground and the worse types of sea environments. In this paper, the bearing capacity of a multi-bucket structure is studied by experiments with a single bucket and four-bucket foundation in a saturated sand layer. Based on the experimental data and numerical analysis results, the bearing capacity behavior and the bucket group effect are compared and analyzed. Furthermore, some influential factors, such as the soil type, the ratio of length to diameter L/D, the ratio of the bucket spacing to the bucket diameter S/D, and the bucket number are introduced and their effects on the multi-bucket structural capacity are investigated. The vertical static capacity adjustment factor is introduced to evaluate the bucket group effects of the multi-bucket foundation.展开更多
Based on mechanical characteristics such as large vertical load, large horizontal load, large bending moment and complex geological conditions, a large scale composite bucket foundation （CBF） is put forward. Both th...Based on mechanical characteristics such as large vertical load, large horizontal load, large bending moment and complex geological conditions, a large scale composite bucket foundation （CBF） is put forward. Both the theoretical analysis and numerical simulation are employed to study the bearing capacity of CBF and the relationship between loads and ground deformation. Furthermore, monopile, high-rise pile cap, tripod and CBF designs are compared to analyze the bearing capacity and ground deformation, with a 3-MW wind generator as an example. The resuits indicate that CBF can effectively bear horizontal load and large bending moment resulting from upper structures and environmental load.展开更多
The key in the force transmission between the tower and the foundation for offshore wind turbines is to transfer the large moment and horizontal loads. The finite element model of a large-scale prestressing bucket fou...The key in the force transmission between the tower and the foundation for offshore wind turbines is to transfer the large moment and horizontal loads. The finite element model of a large-scale prestressing bucket founda- tion for offshore wind turbines is set up and the structural characteristics of the arc transition structure of the founda- tion are analyzed for 40-60 channels(20-30 rows) arranged with prestressing steel strand under the same ultimate load and boundary conditions. The mechanical characteristics of the key parts of the foundation structures are illus- trated by the peak of the principal tensile stress, the peak of the principal compressive stress and the distribution areas where the principal tensile stress is larger than 2.00 MPa. It can be concluded that the maximum principal tensile stress of the arc transition decreases with the increasing number of channels, and the amplitude does not change signifi- cantly; the maximum principal compressive stress increases with the increasing number of channels and the amplitude changes significantly; however, for the distribution areas where the principal tensile stress is larger than 2.00 MPa, with different channel numbers, the phenomenon is not obvious. Furthermore, the principal tensile stress at the top of the foundation beams fluctuantly increases with the increasing number of channels and for the top cover of the bucket, the principal tensile stress decreases with the increasing number of channels.展开更多
The wide-shallow composite bucket foundation(WSCBF) is a new type of offshore wind power foundation that can be built on land and rapidly installed offshore, there by effectively reducing the construction time and cos...The wide-shallow composite bucket foundation(WSCBF) is a new type of offshore wind power foundation that can be built on land and rapidly installed offshore, there by effectively reducing the construction time and costs of offshore wind power foundation. In this study, the horizontal bearing capacity is calculated by finite element simulation and compared with test results to verify the validity of results. In this process, the vertical load and bending load are respectively calculated by the finite element simulation. Under the vertical load effect, the bucket foundation and the soil inside are regarded as a whole, and the corresponding buckling failure mode is obtained. The ultimate vertical bearing capacity is calculated using empirical and theoretical formulas; the theoretical formula is also revised by finite element results. Under bending load, the rotational center of the composite bucket foundation(in a region close to the bucket bottom) gradually moves from the left of the central axis(reverse to loading direction) to the nearby compartment boards along the loading direction. The H–M envelope line shows a linear relationship, and it is determined that the vertical and bending ultimate bearing capacities can be improved by an appropriate vertical load.展开更多
The large-scale bucket foundation with 30 m in diameter and 6 m in height was used as the foundation of wind turbine. The wide-shallow foundation is different from the traditional bucket foundation with high ratio of ...The large-scale bucket foundation with 30 m in diameter and 6 m in height was used as the foundation of wind turbine. The wide-shallow foundation is different from the traditional bucket foundation with high ratio of height to diameter. The cover-load-bearing mode of the new type foundation can resist more external loadings. To achieve the bearing mode, the muddy soil inside the bucket should be reinforced, which will improve the soil strength and make the soil and foundation into a whole part to resist the external loadings. The vacuum and electro-osmotic soil reinforc- ing methods were used in the experiments. The results showed that the bearing behavior of the muddy soil were effec- tively improved by the negative pressure and electro-osmotic effect, and the improved muddy soil with better strength could work together with the bucket foundation, meaning that the top-cover bearing mode of the new bucket founda- tion was achieved. During the soil reinforcing process, the foundation moved downward, i.e., the settlement of founda- tion was almost finished during the pre-loading process caused by the vacuum and electro-osmotic method.展开更多
Centrifuge experiments are carried out to investigate the responses of suction bucket foundations under horizontal dynamic loading. The effects of loading amplitude, the size of the bucket and the structural weight on...Centrifuge experiments are carried out to investigate the responses of suction bucket foundations under horizontal dynamic loading. The effects of loading amplitude, the size of the bucket and the structural weight on the dynamic responses are investigated. It is shown that, when the loading amplitude is over a critical value, the sand at the upper part around the bucket softens or even liquefies. The liquefaction index （excess pore pressure divided by initial effective stress. In this paper, the developmental degree of excess pore pressure is described by liquefaction index） decreases from the upper part to the lower part of the sand foundation in the vertical direction and decreases from near to far away from the bucket＇s side wall in the horizontal direction, large settlements of the bucket and the sand around the bucket are induced by the horizontal dynamic loading. The dynamic responses of the bucket of a smaller height （when the diameter is the same） are heavier. A cyclic crack some distance near the bucket occurs in the sand.展开更多
The bucket wheel reclaimer(BWR) is a key piece of equipment which has been widely used for stacking and reclaiming bulk materials(i.e.iron ore and coal) in places such as ports,iron-steel plants,coal storage areas,and...The bucket wheel reclaimer(BWR) is a key piece of equipment which has been widely used for stacking and reclaiming bulk materials(i.e.iron ore and coal) in places such as ports,iron-steel plants,coal storage areas,and power stations from stockpiles.BWRs are very large in size,heavy in weight,expensive in price,and slow in motion.There are many challenges in attempting to automatically control their motion to accurately follow the required trajectories involving uncertain parameters from factors such as friction,turbulent wind,its own dynamics,and encoder limitations.As BWRs are always heavily engaged in production and cannot be spared very long for motion control studies and associated developments,a BWR model and simulation environment closely resembling real life conditions would be beneficial.The following research focused mainly on the implementation of fuzzy logic to a BWR motion control from an engineer's perspective.First,the modeling of a BWR including partially known parameters such as friction force and turbulence to the system was presented.This was then followed by the design of a fuzzy logic-based control built on a model-based control loop.The investigation provides engineers with an example of applying fuzzy logic in a model based approach to properly control the motion of a large BWR following defined trajectories,as well as to show possible ways of further improving the controller performance.The result indicates that fuzzy logic can be applied easily by engineers to overcome most motion control issues involving a large BWR.展开更多
Suction bucket foundations can be divided into four compartments by cruciform internal bulkheads,thereby yielding better capacity in certain conditions than those without internal bulkheads.As yet,no systematic study ...Suction bucket foundations can be divided into four compartments by cruciform internal bulkheads,thereby yielding better capacity in certain conditions than those without internal bulkheads.As yet,no systematic study has been conducted regarding the effects of cruciform internal bulkheads on the capacities of suction bucket foundations.In this study,we established a large number of finite element models of suction bucket foundations with and without cruciform internal bulkheads and of solid embedded circular foundations.We found the uniaxial capacities and failure modes of suction bucket foundations with various depth ratios to remain basically unaffected by internal bulkheads in uniform clays.However,in inhomogeneous clay with high strength heterogeneity,we observed the uniaxial moment and horizontal capacities and corresponding failure modes of suction bucket foundations with a low depth ratio to be obviously affected by internal bulkheads.In this case,the uniaxial moment capacities,in particular,as well as the horizontal capacities of suction bucket foundations with cruciform internal bulkheads become obviously greater than those without internal bulkheads.Under combined loading,we found the failure envelopes of suction bucket foundations with and without cruciform internal bulkheads and of solid circular foundation to also be basically consistent in uniform clays.However,in inhomogeneous clay with high strength heterogeneity,cruciform internal bulkheads can obviously change the shapes of the failure envelopes of bucket foundations with a small depth ratio.We conclude that when the acting vertical load or foundation depth is relatively small,suction bucket foundations with cruciform internal bulkheads can be subjected to larger moment and horizontal loads in soft clays with high strength heterogeneity.展开更多
Under the effect of eccentric loads,when the suction pressure of the composite bucket foundation is leveled,the seepage failure is very easy to occur.The seepage failure occurrence causes the foundation to settle unev...Under the effect of eccentric loads,when the suction pressure of the composite bucket foundation is leveled,the seepage failure is very easy to occur.The seepage failure occurrence causes the foundation to settle unevenly and impairs the bearing performance.This study uses ABAQUS finite element software to establish a composite bucket foundation model for finite element analysis.The model simulates the seepage of the foundation penetrating process under eccentric load to reveal the induced seepage characteristics of the bucket foundation.The most vulnerable position of seepage failure under the eccentric loading is elucidated.Critical suction formulas for different offset eccentric moment strategies are derived and compared with existing literature formulas.Then the derived formula is supplemented and corrected according to the pressure difference between adjacent cabins.Conclusions can be drawn:(1)Under eccentric loads,the critical suction decreases about 7%−10%.(2)The pressure difference between adjacent cabins impacts significantly on the seepage field,and the critical suction,at most,can be reduced by 17.56%.(3)the offset strategies have little effect on the seepage field.Efficient and appropriate strategies can be selected to meet the requirement of leveling in engineering project.展开更多
An integrated finite element model(FEM)of offshore wind tower-foundation-soil is established by ABAQUS, where a large-scale composite bucket foundation with seven compartments inside is applied to supporting the upper...An integrated finite element model(FEM)of offshore wind tower-foundation-soil is established by ABAQUS, where a large-scale composite bucket foundation with seven compartments inside is applied to supporting the upper wind tower. The dynamic response of the structure-foundation system is studied under three seismic waves with the same peak ground acceleration of 0.035 g. It can be seen that the dynamic response increases at the beginning with the structure height, then it decreases because the structural damping increases due to the mass effect of the upper wind turbine generator system. It is shown that the anti-liquefaction capacity of the soil inside and underneath the foundation is improved owing to the high overburden pressure of the upper structure and the constraint effect of the bucket skirt and subdivisions. Moreover, the liquefaction resistance of the soil inside the middle compartment is improved to a higher degree than that inside the side compartments.展开更多
Centrifugal experiments were carried out to investigate the responses of suction bucket foundations under horizontal and vertical dynamic loading. It is shown that when the loading amplitude is over a critical value, ...Centrifugal experiments were carried out to investigate the responses of suction bucket foundations under horizontal and vertical dynamic loading. It is shown that when the loading amplitude is over a critical value, the sand at the upper part around the bucket is softened or even liquefied. The excess pore pressure decreases from the upper part to the lower part of the sand layer in the vertical direction and decreases radially from the bucket＇s side wall in the horizontal direction. Large settlements of the bucket and the sand layer around the bucket are induced by dynamic loading. The dynamic responses of the bucket with smaller height （the same diameter） are heavier.展开更多
The layout of the buckets for tunnel boring machine(TBM)directly affects the muck removal efficiency of cutterhead during excavation.In order to improve the muck removal performance for TBM,the optimal design of bucke...The layout of the buckets for tunnel boring machine(TBM)directly affects the muck removal efficiency of cutterhead during excavation.In order to improve the muck removal performance for TBM,the optimal design of bucket layout was investigated.The whole muck transfer process was simulated by discrete-element method(DEM),including the muck falling,colliding,pilling up,shoveling and transferring into the hopper.The muck model was established based on size distribution analysis of muck samples from the water-supply tunnel project in Jilin Province,China.Then,the influence of the bucket number and the interval angle between buckets on muck removal performance was investigated.The results indicated that,as the number of buckets increased from four to eight,the removed muck increased by 29%and the residual volume decreased by 40.5%,and the process became steadier.Different interval angles between buckets were corresponding to different removed muck irregularly,but the residual muck number increased generally with the angles.The optimal layout of buckets for the cutterhead in this tunnel project was obtained based on the simulation results,and the muck removal performance of the TBM was verified by the actual data in the engineering construction.展开更多
基金support from the National Natural Science Foundation of China(No.52171274)。
文摘For the development of an integrated rounded rectangular wellhead platform with a bucket foundation,a model test was conducted to study the towing motion response of such a structure under still water and wave conditions.The influence of various factors on the floating stability of the structure was investigated through alterations of the towing conditions(draft,towing point position,and wave conditions),and the related influencing mechanism was analyzed.Comparison and analysis were performed to determine the changes in the structure motion pattern and various effects of towing conditions on the structure during towing in still water and regular waves.Moreover,the influence of each factor on the structure’s motion response during towing was analyzed using the Apriori algorithm.In addition,for the simulation of the towing process under actual sea conditions,a towing test was performed under irregular waves,and the stability of towing in irregular waves was compared with that in regular waves.
基金financially supported by the Scientific Research Foundation of China Three Gorges Corporation (Grant No. 32007095)。
文摘The composite bucket foundations of offshore wind turbines penetrate minimally into the seabed, making local scour a significant threat to wind turbine stability. This study develops a physical model to examine local scour patterns around a novel mono-column composite bucket foundation(MCCBF) under unidirectional flows. The experiments reveal that under weak-flow conditions, no significant scour pits develop at the front or lateral sides of the MCCBF,while two distinct scour pits form behind the lateral sides. Under strong-flow conditions, substantial scour pits emerge at both frontal and lateral sides of the bucket foundation, with two scour pits extending downstream on either side. The research demonstrates that both the range and depth of local scour increase with higher flow velocity and decreasing water depth, though the mechanisms influencing local scour around the MCCBF prove more complex than those affecting monopiles. The distinctive structural features of the MCCBF necessitate particular consideration of effects related to bucket foundation exposure. The study concludes by proposing an empirical formula for predicting maximum scour depth around the MCCBF.
基金The National Natural Science Foundation of China(No.51109160)the National High Technology Research and Development Program of China(863 Program)(No.2012AA051705)+1 种基金the International S&T Cooperation Program of China(No.2012DFA70490)the Natural Science Foundation of Tianjin(No.13JCQNJC06900,13JCYBJC19100)
文摘In order to study the towing dynamic properties of the large-scale composite bucket foundation the hydrodynamic software MOSES is used to simulate the dynamic motion of the foundation towed to the construction site.The MOSES model with the prototype size is established as the water draft of 5 and 6 m under the environmental conditions on site.The related factors such as towing force displacement towing accelerations in six degrees of freedom of the bucket foundation and air pressures inside the bucket are analyzed in detail.In addition the towing point and wave conditions are set as the critical factors to simulate the limit conditions of the stable dynamic characteristics.The results show that the large-scale composite bucket foundation with reasonable subdivisions inside the bucket has the satisfying floating stability.During the towing process the air pressures inside the bucket obviously change little and it is found that the towing point at the waterline is the most optimal choice.The characteristics of the foundation with the self-floating towing technique are competitive for saving lots of cost with few of the expensive types of equipment required during the towing transportation.
基金Supported by National High Technology Research and Development Program of China("863"Program,No.2012AA051705)National Natural Science Foundation of China(No.51109160)International Science and Technology Cooperation Program of China(No.2012DFA70490)
文摘In 2010,the first offshore wind turbine with integrated installation was established in Qidong sea area of Jiangsu Province,China,which led to the implementation phase of one-step-installation technique based on the design and construction of large-scale bucket-top-bearing (LSBTB) bucket foundation.The critical technique of LSBTB bucket foundation included self-floating towing,penetration with adjustment of horizontal levelness,removability and one-step-installation.The process of one-step-installation included the prefabrication of LSBTB bucket foundation in onshore construction base,installation and debugging of wind power,overall water transportation of foundation and wind power system,and installation of foundation and offshore wind turbine on the appointed sea area.The cost of one-step-installation technique was about 5 000 Yuan/kW,which was 30%-50% lower than that of the existing technique.The prefabrication of LSBTB bucket foundation took about two months.During the one-step-installation process,the installation and debugging of wind power and overall water transportation need about one to two days in sea area within 35 m depth.After the proposed technique is industrialized,the cost will be further reduced,and the installation capacity is expected to be up to 500 wind turbines per year.
文摘As a novel type of foundation in beach and shallow sea, the bucket structure is especially suitable for complex conditions such as soft clay ground and the worse types of sea environments. In this paper, the bearing capacity of a multi-bucket structure is studied by experiments with a single bucket and four-bucket foundation in a saturated sand layer. Based on the experimental data and numerical analysis results, the bearing capacity behavior and the bucket group effect are compared and analyzed. Furthermore, some influential factors, such as the soil type, the ratio of length to diameter L/D, the ratio of the bucket spacing to the bucket diameter S/D, and the bucket number are introduced and their effects on the multi-bucket structural capacity are investigated. The vertical static capacity adjustment factor is introduced to evaluate the bucket group effects of the multi-bucket foundation.
文摘Based on mechanical characteristics such as large vertical load, large horizontal load, large bending moment and complex geological conditions, a large scale composite bucket foundation （CBF） is put forward. Both the theoretical analysis and numerical simulation are employed to study the bearing capacity of CBF and the relationship between loads and ground deformation. Furthermore, monopile, high-rise pile cap, tripod and CBF designs are compared to analyze the bearing capacity and ground deformation, with a 3-MW wind generator as an example. The resuits indicate that CBF can effectively bear horizontal load and large bending moment resulting from upper structures and environmental load.
基金Supported by Creative Research Groups of National Natural Science Foundation of China (No. 51021004)Program for Changjiang Scholars and Innovative Research Team in University (No. IRT0851)
文摘The key in the force transmission between the tower and the foundation for offshore wind turbines is to transfer the large moment and horizontal loads. The finite element model of a large-scale prestressing bucket founda- tion for offshore wind turbines is set up and the structural characteristics of the arc transition structure of the founda- tion are analyzed for 40-60 channels(20-30 rows) arranged with prestressing steel strand under the same ultimate load and boundary conditions. The mechanical characteristics of the key parts of the foundation structures are illus- trated by the peak of the principal tensile stress, the peak of the principal compressive stress and the distribution areas where the principal tensile stress is larger than 2.00 MPa. It can be concluded that the maximum principal tensile stress of the arc transition decreases with the increasing number of channels, and the amplitude does not change signifi- cantly; the maximum principal compressive stress increases with the increasing number of channels and the amplitude changes significantly; however, for the distribution areas where the principal tensile stress is larger than 2.00 MPa, with different channel numbers, the phenomenon is not obvious. Furthermore, the principal tensile stress at the top of the foundation beams fluctuantly increases with the increasing number of channels and for the top cover of the bucket, the principal tensile stress decreases with the increasing number of channels.
基金supported by the National Natural Science Foundation of China (No.51379142 and No.51679163)Innovation Method Fund of China (No.2016IM030100)the Tianjin Municipal Natural Science Foundation (No.17JCYBJC22000)
文摘The wide-shallow composite bucket foundation(WSCBF) is a new type of offshore wind power foundation that can be built on land and rapidly installed offshore, there by effectively reducing the construction time and costs of offshore wind power foundation. In this study, the horizontal bearing capacity is calculated by finite element simulation and compared with test results to verify the validity of results. In this process, the vertical load and bending load are respectively calculated by the finite element simulation. Under the vertical load effect, the bucket foundation and the soil inside are regarded as a whole, and the corresponding buckling failure mode is obtained. The ultimate vertical bearing capacity is calculated using empirical and theoretical formulas; the theoretical formula is also revised by finite element results. Under bending load, the rotational center of the composite bucket foundation(in a region close to the bucket bottom) gradually moves from the left of the central axis(reverse to loading direction) to the nearby compartment boards along the loading direction. The H–M envelope line shows a linear relationship, and it is determined that the vertical and bending ultimate bearing capacities can be improved by an appropriate vertical load.
基金National Hi-tech Research and Development Program of China("863"Program,No.2012AA051705)National Natural Science Foundation of China(No. 51109160)
文摘The large-scale bucket foundation with 30 m in diameter and 6 m in height was used as the foundation of wind turbine. The wide-shallow foundation is different from the traditional bucket foundation with high ratio of height to diameter. The cover-load-bearing mode of the new type foundation can resist more external loadings. To achieve the bearing mode, the muddy soil inside the bucket should be reinforced, which will improve the soil strength and make the soil and foundation into a whole part to resist the external loadings. The vacuum and electro-osmotic soil reinforc- ing methods were used in the experiments. The results showed that the bearing behavior of the muddy soil were effec- tively improved by the negative pressure and electro-osmotic effect, and the improved muddy soil with better strength could work together with the bucket foundation, meaning that the top-cover bearing mode of the new bucket founda- tion was achieved. During the soil reinforcing process, the foundation moved downward, i.e., the settlement of founda- tion was almost finished during the pre-loading process caused by the vacuum and electro-osmotic method.
基金This study programis supported by the fund of the Chinese Ocean Oil Co.and the Chinese Academy of Sciences ,KJCX2-SW-L03-01 (40025103) andthe National Natural Science Foundation of China (Grant No.10202024)
文摘Centrifuge experiments are carried out to investigate the responses of suction bucket foundations under horizontal dynamic loading. The effects of loading amplitude, the size of the bucket and the structural weight on the dynamic responses are investigated. It is shown that, when the loading amplitude is over a critical value, the sand at the upper part around the bucket softens or even liquefies. The liquefaction index （excess pore pressure divided by initial effective stress. In this paper, the developmental degree of excess pore pressure is described by liquefaction index） decreases from the upper part to the lower part of the sand foundation in the vertical direction and decreases from near to far away from the bucket＇s side wall in the horizontal direction, large settlements of the bucket and the sand around the bucket are induced by the horizontal dynamic loading. The dynamic responses of the bucket of a smaller height （when the diameter is the same） are heavier. A cyclic crack some distance near the bucket occurs in the sand.
基金support through the ARC Linkage LP0989780 grant titled "The study anddevelopment of a 3-D real-time stockpile management system"the support in part from Institute for Mineral and Energy Resources,University of Adelaide 2009-2010,as well as Faculty of Engineering,Computer and Mathematical Sciences strategic research funding,2010
文摘The bucket wheel reclaimer(BWR) is a key piece of equipment which has been widely used for stacking and reclaiming bulk materials(i.e.iron ore and coal) in places such as ports,iron-steel plants,coal storage areas,and power stations from stockpiles.BWRs are very large in size,heavy in weight,expensive in price,and slow in motion.There are many challenges in attempting to automatically control their motion to accurately follow the required trajectories involving uncertain parameters from factors such as friction,turbulent wind,its own dynamics,and encoder limitations.As BWRs are always heavily engaged in production and cannot be spared very long for motion control studies and associated developments,a BWR model and simulation environment closely resembling real life conditions would be beneficial.The following research focused mainly on the implementation of fuzzy logic to a BWR motion control from an engineer's perspective.First,the modeling of a BWR including partially known parameters such as friction force and turbulence to the system was presented.This was then followed by the design of a fuzzy logic-based control built on a model-based control loop.The investigation provides engineers with an example of applying fuzzy logic in a model based approach to properly control the motion of a large BWR following defined trajectories,as well as to show possible ways of further improving the controller performance.The result indicates that fuzzy logic can be applied easily by engineers to overcome most motion control issues involving a large BWR.
基金supported by the National Natural Science Foundation of China(Nos.51479133,51109157)the Elite Scholar Program of Tianjin University(2017XRG0040)
文摘Suction bucket foundations can be divided into four compartments by cruciform internal bulkheads,thereby yielding better capacity in certain conditions than those without internal bulkheads.As yet,no systematic study has been conducted regarding the effects of cruciform internal bulkheads on the capacities of suction bucket foundations.In this study,we established a large number of finite element models of suction bucket foundations with and without cruciform internal bulkheads and of solid embedded circular foundations.We found the uniaxial capacities and failure modes of suction bucket foundations with various depth ratios to remain basically unaffected by internal bulkheads in uniform clays.However,in inhomogeneous clay with high strength heterogeneity,we observed the uniaxial moment and horizontal capacities and corresponding failure modes of suction bucket foundations with a low depth ratio to be obviously affected by internal bulkheads.In this case,the uniaxial moment capacities,in particular,as well as the horizontal capacities of suction bucket foundations with cruciform internal bulkheads become obviously greater than those without internal bulkheads.Under combined loading,we found the failure envelopes of suction bucket foundations with and without cruciform internal bulkheads and of solid circular foundation to also be basically consistent in uniform clays.However,in inhomogeneous clay with high strength heterogeneity,cruciform internal bulkheads can obviously change the shapes of the failure envelopes of bucket foundations with a small depth ratio.We conclude that when the acting vertical load or foundation depth is relatively small,suction bucket foundations with cruciform internal bulkheads can be subjected to larger moment and horizontal loads in soft clays with high strength heterogeneity.
基金supported by the National Natural Science Foundation of China(Grant No.51779171)the Tianjin Municipal Natural Science Foundation(Grant No.18JCYBJC22800).
文摘Under the effect of eccentric loads,when the suction pressure of the composite bucket foundation is leveled,the seepage failure is very easy to occur.The seepage failure occurrence causes the foundation to settle unevenly and impairs the bearing performance.This study uses ABAQUS finite element software to establish a composite bucket foundation model for finite element analysis.The model simulates the seepage of the foundation penetrating process under eccentric load to reveal the induced seepage characteristics of the bucket foundation.The most vulnerable position of seepage failure under the eccentric loading is elucidated.Critical suction formulas for different offset eccentric moment strategies are derived and compared with existing literature formulas.Then the derived formula is supplemented and corrected according to the pressure difference between adjacent cabins.Conclusions can be drawn:(1)Under eccentric loads,the critical suction decreases about 7%−10%.(2)The pressure difference between adjacent cabins impacts significantly on the seepage field,and the critical suction,at most,can be reduced by 17.56%.(3)the offset strategies have little effect on the seepage field.Efficient and appropriate strategies can be selected to meet the requirement of leveling in engineering project.
基金Supported by the National Natural Science Foundation of China(No.51379142)Tianjin Natural Science Foundation(No.13JCQNJC06900)
文摘An integrated finite element model(FEM)of offshore wind tower-foundation-soil is established by ABAQUS, where a large-scale composite bucket foundation with seven compartments inside is applied to supporting the upper wind tower. The dynamic response of the structure-foundation system is studied under three seismic waves with the same peak ground acceleration of 0.035 g. It can be seen that the dynamic response increases at the beginning with the structure height, then it decreases because the structural damping increases due to the mass effect of the upper wind turbine generator system. It is shown that the anti-liquefaction capacity of the soil inside and underneath the foundation is improved owing to the high overburden pressure of the upper structure and the constraint effect of the bucket skirt and subdivisions. Moreover, the liquefaction resistance of the soil inside the middle compartment is improved to a higher degree than that inside the side compartments.
基金the fund of Chinese Ocean Oil Co.Chinese Academy of Sciences(KZCX2-YW-302-02).
文摘Centrifugal experiments were carried out to investigate the responses of suction bucket foundations under horizontal and vertical dynamic loading. It is shown that when the loading amplitude is over a critical value, the sand at the upper part around the bucket is softened or even liquefied. The excess pore pressure decreases from the upper part to the lower part of the sand layer in the vertical direction and decreases radially from the bucket＇s side wall in the horizontal direction. Large settlements of the bucket and the sand layer around the bucket are induced by dynamic loading. The dynamic responses of the bucket with smaller height （the same diameter） are heavier.
基金Project(51475478)supported by the National Natural Science Foundation of ChinaProject(2012AA041801)supported by the National High Technology Research and Development Program of China+1 种基金Project(2014FJ1002)supported by the Science and Technology Major Project of Hunan Province,ChinaProject(2013CB035401)supported by the National Basic Research Program of China。
文摘The layout of the buckets for tunnel boring machine(TBM)directly affects the muck removal efficiency of cutterhead during excavation.In order to improve the muck removal performance for TBM,the optimal design of bucket layout was investigated.The whole muck transfer process was simulated by discrete-element method(DEM),including the muck falling,colliding,pilling up,shoveling and transferring into the hopper.The muck model was established based on size distribution analysis of muck samples from the water-supply tunnel project in Jilin Province,China.Then,the influence of the bucket number and the interval angle between buckets on muck removal performance was investigated.The results indicated that,as the number of buckets increased from four to eight,the removed muck increased by 29%and the residual volume decreased by 40.5%,and the process became steadier.Different interval angles between buckets were corresponding to different removed muck irregularly,but the residual muck number increased generally with the angles.The optimal layout of buckets for the cutterhead in this tunnel project was obtained based on the simulation results,and the muck removal performance of the TBM was verified by the actual data in the engineering construction.
