Boron-doped aluminum nitride （B-AlN） thin films were synthesized on Al substrates by using chemical vapor deposition method by changing the synthesis parameters and were used as thermal interface material for high p...Boron-doped aluminum nitride （B-AlN） thin films were synthesized on Al substrates by using chemical vapor deposition method by changing the synthesis parameters and were used as thermal interface material for high power light emitting diode （LED）. The B-AlN thin film-coated Al substrate was used as heat sink and studied the performance of high power LED at various driving currents. The recorded transient cooling curve was evaluated to study the rise in junction temperature （Tj）, total thermal resistance （gth_tot） and the substrate thermal resistance （Rth_sub） of the given LED. From the results, the B-AlN thin film （prepared at process 4） interfaced LED showed low Rth-tot and Tj value for all driving currents and observed high difference in Rth_tot （△Rth_tot =2.2 K/W） at 700 mA when compared with the Rth-tot of LED attached on bare Al substrates （LED/Al）. The Tj of LED was reduced considerably and observed 4.7 ℃ as ATj for the film prepared using process 4 condition when compared with LED/Al boundary condition at 700 mA. The optical performance of LED was also tested for all boundary conditions and showed improved lux values for the given LED at 700 mA where B-AlN thin film was synthesized using optimized flow of Al, B and N sources with minimized B and N content. The other optical parameters such as color correlated temperature and color rendering index were also measured and observed low difference for all boundary conditions. The observed results are suggested to use B-AlN thin film as efficient solid thin film thermal interface materials in high power LED.展开更多
针对BOTDR分布式光纤传感技术中背向散射光中布里渊散射信号光的分离提取问题,设计了一种高消光比双通道可调M-Z干涉仪,该干涉仪由两个3 d B耦合器、电动光纤延迟线、偏振控制器及光隔离器构成。使用C波段宽带光源(ASE)对M-Z干涉仪性能...针对BOTDR分布式光纤传感技术中背向散射光中布里渊散射信号光的分离提取问题,设计了一种高消光比双通道可调M-Z干涉仪,该干涉仪由两个3 d B耦合器、电动光纤延迟线、偏振控制器及光隔离器构成。使用C波段宽带光源(ASE)对M-Z干涉仪性能进行了检测。并将脉宽为100 ns,重复频率为20 k Hz的脉冲光入射到长度为5 km的普通单模光纤中,将其产生的背向散射光经过M-Z干涉仪滤波后,通过光谱仪检测其输出的光谱信号。实验结果表明该干涉仪能够实现大范围高精度可调节滤波功能,对瑞利散射光的抑制超过20d B,可以有效地将背向散射光中的布里渊散射光信号分离提取出来。展开更多
基金financially supported by Collaborative Research in Engineering, Science and Technology (CREST) under Grant No. 304/PFIZIK/650601/C121
文摘Boron-doped aluminum nitride （B-AlN） thin films were synthesized on Al substrates by using chemical vapor deposition method by changing the synthesis parameters and were used as thermal interface material for high power light emitting diode （LED）. The B-AlN thin film-coated Al substrate was used as heat sink and studied the performance of high power LED at various driving currents. The recorded transient cooling curve was evaluated to study the rise in junction temperature （Tj）, total thermal resistance （gth_tot） and the substrate thermal resistance （Rth_sub） of the given LED. From the results, the B-AlN thin film （prepared at process 4） interfaced LED showed low Rth-tot and Tj value for all driving currents and observed high difference in Rth_tot （△Rth_tot =2.2 K/W） at 700 mA when compared with the Rth-tot of LED attached on bare Al substrates （LED/Al）. The Tj of LED was reduced considerably and observed 4.7 ℃ as ATj for the film prepared using process 4 condition when compared with LED/Al boundary condition at 700 mA. The optical performance of LED was also tested for all boundary conditions and showed improved lux values for the given LED at 700 mA where B-AlN thin film was synthesized using optimized flow of Al, B and N sources with minimized B and N content. The other optical parameters such as color correlated temperature and color rendering index were also measured and observed low difference for all boundary conditions. The observed results are suggested to use B-AlN thin film as efficient solid thin film thermal interface materials in high power LED.
文摘针对BOTDR分布式光纤传感技术中背向散射光中布里渊散射信号光的分离提取问题,设计了一种高消光比双通道可调M-Z干涉仪,该干涉仪由两个3 d B耦合器、电动光纤延迟线、偏振控制器及光隔离器构成。使用C波段宽带光源(ASE)对M-Z干涉仪性能进行了检测。并将脉宽为100 ns,重复频率为20 k Hz的脉冲光入射到长度为5 km的普通单模光纤中,将其产生的背向散射光经过M-Z干涉仪滤波后,通过光谱仪检测其输出的光谱信号。实验结果表明该干涉仪能够实现大范围高精度可调节滤波功能,对瑞利散射光的抑制超过20d B,可以有效地将背向散射光中的布里渊散射光信号分离提取出来。
