The size of impeller reflux holes for centrifugal pump has influence on the pressure distribution of front and rear shrouds and rear pump chamber, as well as energy characteristics of whole pump and axial force. Low s...The size of impeller reflux holes for centrifugal pump has influence on the pressure distribution of front and rear shrouds and rear pump chamber, as well as energy characteristics of whole pump and axial force. Low specific-speed centrifugal pump with Q=12.5 m3/h, H=60 m, n=2950 r/min was selected to be designed with eight axial reflux balance holes with 4.5 mm in diameter. The simulated Q-H curve and net positive suction head(NPSH) were in good agreement with experimental results, which illustrated that centrifugal pump with axial reflux balance holes was superior in the cavitation characteristic; however, it showed to little superiority in head and efficiency. The pressure in rear pump chamber at 0.6 times rate flow is 29.36% of pressure difference between outlet and inlet, which reduces to 29.10% at rate flow and 28.33% at 1.4 times rate flow. As the whole, the pressure distribution on front and rear shrouds from simulation results is not a standard parabola, and axial force decreases as flow rate increases. Radical reflux balance holes chosen to be 5.2 mm and 5.9 mm in diameter were further designed with other hydraulic parts unchanged. With structural grids adopted for total flow field, contrast numerical simulation on internal flow characteristics was conducted based on momentum equations and standard turbulence model(κ-ε). It is found that axial force of pump with radical reflux balance holes of5.2 mm and 5.9 mm in diameter is significantly less than that with radical reflux balance holes of 4.5 mm in diameter. Better axial force balance is obtained as the ratio of area of reflux balance holes and area of sealing ring exceeds 6.展开更多
A numerical procedure for analyzing the temperature distribution in a hollow axisymmetric cylinder, made of functionally gradient material （FGM）, was investigated. Based on the thermal elasticity theory and the arbi...A numerical procedure for analyzing the temperature distribution in a hollow axisymmetric cylinder, made of functionally gradient material （FGM）, was investigated. Based on the thermal elasticity theory and the arbitrary difference precise integration （ADPI） method, temperature distribution through the FGM cylinder in the ring section under a transient-state temperature field was developed and presented. A genetic algorithm （GA） was applied to the thermal stress optimal design of an FGM hollow cylinder, and as a result, the minimum thermal stress distribution in the FGM cylinder was obtained. A corresponding numerical procedure regarding to a ceramic-metal FGM cylinder was perforrned. and the comnutational results were discussed.展开更多
基金Project(51179075)supported by the National Natural Science Foundation of ChinaProject(BK20131256)supported by the Natural Science Funds of Jiangsu Province,ChinaProject supported by the Priority Academic Program Development of Jiangsu High Education Institutions,China
文摘The size of impeller reflux holes for centrifugal pump has influence on the pressure distribution of front and rear shrouds and rear pump chamber, as well as energy characteristics of whole pump and axial force. Low specific-speed centrifugal pump with Q=12.5 m3/h, H=60 m, n=2950 r/min was selected to be designed with eight axial reflux balance holes with 4.5 mm in diameter. The simulated Q-H curve and net positive suction head(NPSH) were in good agreement with experimental results, which illustrated that centrifugal pump with axial reflux balance holes was superior in the cavitation characteristic; however, it showed to little superiority in head and efficiency. The pressure in rear pump chamber at 0.6 times rate flow is 29.36% of pressure difference between outlet and inlet, which reduces to 29.10% at rate flow and 28.33% at 1.4 times rate flow. As the whole, the pressure distribution on front and rear shrouds from simulation results is not a standard parabola, and axial force decreases as flow rate increases. Radical reflux balance holes chosen to be 5.2 mm and 5.9 mm in diameter were further designed with other hydraulic parts unchanged. With structural grids adopted for total flow field, contrast numerical simulation on internal flow characteristics was conducted based on momentum equations and standard turbulence model(κ-ε). It is found that axial force of pump with radical reflux balance holes of5.2 mm and 5.9 mm in diameter is significantly less than that with radical reflux balance holes of 4.5 mm in diameter. Better axial force balance is obtained as the ratio of area of reflux balance holes and area of sealing ring exceeds 6.
文摘A numerical procedure for analyzing the temperature distribution in a hollow axisymmetric cylinder, made of functionally gradient material （FGM）, was investigated. Based on the thermal elasticity theory and the arbitrary difference precise integration （ADPI） method, temperature distribution through the FGM cylinder in the ring section under a transient-state temperature field was developed and presented. A genetic algorithm （GA） was applied to the thermal stress optimal design of an FGM hollow cylinder, and as a result, the minimum thermal stress distribution in the FGM cylinder was obtained. A corresponding numerical procedure regarding to a ceramic-metal FGM cylinder was perforrned. and the comnutational results were discussed.
