This paper introduces a novel single-phase asymmetrical multilevel inverter suitable for hybrid renewable energy sources. The proposed inverter consists of two isolated DC sources and six power semiconductor controlle...This paper introduces a novel single-phase asymmetrical multilevel inverter suitable for hybrid renewable energy sources. The proposed inverter consists of two isolated DC sources and six power semiconductor controlled switches. The suggested inverter is capable of generating seven-level output when the input DC voltage is taken in the ratio of 1:2. The higher magnitude DC source is fed from Photo Voltaic (PV) panels, whereas the lower magnitude DC source is fed from Wind Turbine (WT) driven Permanent Magnet DC (PMDC) generator. Both the renewable energy sources are connected to the inverter via two DC-DC boost converters connected in cascade (i.e. one for maximum power point tracking and another for DC-link voltage control). The proposed hybrid renewable energy source inverter is connected to single-phase grid via proper control systems. The complete system is simulated using MATLAB/SIMULINK and the results are presented in detail.展开更多
Multilevel inverters have gained much attention for its operation involving applications ranging values of high power rating. This paper proposes a switching topology for asymmetric multilevel inverter utilizing less ...Multilevel inverters have gained much attention for its operation involving applications ranging values of high power rating. This paper proposes a switching topology for asymmetric multilevel inverter utilizing less number of power electronics components. When the number of the output level increases, it requires more switching states and eventually the number of switching components. The increased number of switches results in higher switching losses which may lead to power loss, and reduction of efficiency of the overall conversion system. The salient feature of this proposed topology is that the module can be used as a sub multiple level structure and can be extended for any number of level with minimal increase in the switching components.展开更多
Multilevel inverter (MLI) is one of the most efficient power converters which are especially suited for high power applications with reduced harmonics. MLI not only achieves high output power and is also used in renew...Multilevel inverter (MLI) is one of the most efficient power converters which are especially suited for high power applications with reduced harmonics. MLI not only achieves high output power and is also used in renewable energy sources such as photovoltaic, wind and fuel cells. Among various topologies of MLI, this paper mainly focuses on cascaded MLI with three unequal DC sources called asymmetric cascaded MLI which reduces the number of power switches. Various modulation techniques are also reviewed in literature [1]. In this paper we focus on sinusoidal (or) multicarrier pulse width modulation (SPWM) which improves the output voltage at lower modulation index for obtaining lower Total Harmonic Distortion (THD) level. The gating signal for the 13-level hybrid inverter using SPWM technique is generated using Field Programmable Gate Array (FPGA) processor. The proposed modulation technique results in reduced percentage of THD, but lower order harmonics are not eliminated. So a new technique called Selective Harmonic Elimination (SHE) is also implemented in order to reduce the lower order harmonics. The optimum switching angles are determined for obtaining minimum THD. The performance evaluation of the proposed PWM inverter is verified using an experimental model of 13-level cascaded hybrid MLI and compared with MATLAB/SIMULINK model.展开更多
The enhanced power quality provided by multilevel inverters(MLIs)has made them more appropriate for medium-and high-power applications,including photovoltaic systems.Nevertheless,a prevalent limitation involves the ne...The enhanced power quality provided by multilevel inverters(MLIs)has made them more appropriate for medium-and high-power applications,including photovoltaic systems.Nevertheless,a prevalent limitation involves the necessity for numerous switches and increased voltage stress across these switches,consequently increasing the overall system cost.To address these challenges,a new 17-level asymmetrical MLI with fewer components and low voltage stress is proposed for the photovoltaic system.This innovative MLI configuration has four direct current(DC)sources and 10 switches.Based on the trinary sequence,the proposed topology uses photovoltaics with boost converters and fuzzy logic controllers as its DC sources.Mathematical equations are used to calculate cru-cial parameters for this proposed design,including total standing voltage per unit(TSVPU),cost function per level(CF/L),component count per level(CC/L)and voltage stress across the switches.The comparison is conducted by considering switches,DC sources,TSVPU,CF/L,gate driver circuits and CC/L with other existing MLI topologies.The analysis is carried out under various conditions,encompassing different levels of irradiance,variable loads and modulation indices.To reduce the total harmonic distortion of the suggested topology,the phase opposition disposition approach has been incorporated.The suggested framework is simulated in MATLAB®/Simulink®.The results indicate that the proposed topology achieves a well-distributed stress profile across the switches and has CC/L of 1.23,TSVPU of 5 and CF/L of 4.58 and 5.76 with weight coefficients of 0.5 and 1.5,respectively.These values are not-ably superior to those of existing MLI topologies.Simulation results demonstrate that the proposed topology maintains a consistent output at varying irradiance levels with FLCs and exhibits robust performance under variable loads and diverse modulation indices.Furthermore,the total harmonic distortion achieved with phase opposition disposition is 7.78%,outperforming alternative pulse width modulation techniques.In summary,it provides enhanced performance.Considering this,it is suitable for the photovoltaic system.展开更多
A novel scheme for all-optical inverted wavelength conversion with 40-Gb/s pseudorandom bit sequences (PRBSs) based on a modified terahertz optical asymmetric demultiplexer (TOAD) is proposed. The performance of the p...A novel scheme for all-optical inverted wavelength conversion with 40-Gb/s pseudorandom bit sequences (PRBSs) based on a modified terahertz optical asymmetric demultiplexer (TOAD) is proposed. The performance of the proposed wavelength converter is analyzed in term of extinction ratio (ER) through numerical simulations. For a typical ER of 10 dB, some key characteristic parameters of the semiconductor optical amplifier (SOA) are designed. With the properly designed parameters, a high quality eye diagram is achievable, indicating that the amplitude fluctuation of the output signal is effectively reduced.展开更多
文摘This paper introduces a novel single-phase asymmetrical multilevel inverter suitable for hybrid renewable energy sources. The proposed inverter consists of two isolated DC sources and six power semiconductor controlled switches. The suggested inverter is capable of generating seven-level output when the input DC voltage is taken in the ratio of 1:2. The higher magnitude DC source is fed from Photo Voltaic (PV) panels, whereas the lower magnitude DC source is fed from Wind Turbine (WT) driven Permanent Magnet DC (PMDC) generator. Both the renewable energy sources are connected to the inverter via two DC-DC boost converters connected in cascade (i.e. one for maximum power point tracking and another for DC-link voltage control). The proposed hybrid renewable energy source inverter is connected to single-phase grid via proper control systems. The complete system is simulated using MATLAB/SIMULINK and the results are presented in detail.
文摘Multilevel inverters have gained much attention for its operation involving applications ranging values of high power rating. This paper proposes a switching topology for asymmetric multilevel inverter utilizing less number of power electronics components. When the number of the output level increases, it requires more switching states and eventually the number of switching components. The increased number of switches results in higher switching losses which may lead to power loss, and reduction of efficiency of the overall conversion system. The salient feature of this proposed topology is that the module can be used as a sub multiple level structure and can be extended for any number of level with minimal increase in the switching components.
文摘Multilevel inverter (MLI) is one of the most efficient power converters which are especially suited for high power applications with reduced harmonics. MLI not only achieves high output power and is also used in renewable energy sources such as photovoltaic, wind and fuel cells. Among various topologies of MLI, this paper mainly focuses on cascaded MLI with three unequal DC sources called asymmetric cascaded MLI which reduces the number of power switches. Various modulation techniques are also reviewed in literature [1]. In this paper we focus on sinusoidal (or) multicarrier pulse width modulation (SPWM) which improves the output voltage at lower modulation index for obtaining lower Total Harmonic Distortion (THD) level. The gating signal for the 13-level hybrid inverter using SPWM technique is generated using Field Programmable Gate Array (FPGA) processor. The proposed modulation technique results in reduced percentage of THD, but lower order harmonics are not eliminated. So a new technique called Selective Harmonic Elimination (SHE) is also implemented in order to reduce the lower order harmonics. The optimum switching angles are determined for obtaining minimum THD. The performance evaluation of the proposed PWM inverter is verified using an experimental model of 13-level cascaded hybrid MLI and compared with MATLAB/SIMULINK model.
文摘The enhanced power quality provided by multilevel inverters(MLIs)has made them more appropriate for medium-and high-power applications,including photovoltaic systems.Nevertheless,a prevalent limitation involves the necessity for numerous switches and increased voltage stress across these switches,consequently increasing the overall system cost.To address these challenges,a new 17-level asymmetrical MLI with fewer components and low voltage stress is proposed for the photovoltaic system.This innovative MLI configuration has four direct current(DC)sources and 10 switches.Based on the trinary sequence,the proposed topology uses photovoltaics with boost converters and fuzzy logic controllers as its DC sources.Mathematical equations are used to calculate cru-cial parameters for this proposed design,including total standing voltage per unit(TSVPU),cost function per level(CF/L),component count per level(CC/L)and voltage stress across the switches.The comparison is conducted by considering switches,DC sources,TSVPU,CF/L,gate driver circuits and CC/L with other existing MLI topologies.The analysis is carried out under various conditions,encompassing different levels of irradiance,variable loads and modulation indices.To reduce the total harmonic distortion of the suggested topology,the phase opposition disposition approach has been incorporated.The suggested framework is simulated in MATLAB®/Simulink®.The results indicate that the proposed topology achieves a well-distributed stress profile across the switches and has CC/L of 1.23,TSVPU of 5 and CF/L of 4.58 and 5.76 with weight coefficients of 0.5 and 1.5,respectively.These values are not-ably superior to those of existing MLI topologies.Simulation results demonstrate that the proposed topology maintains a consistent output at varying irradiance levels with FLCs and exhibits robust performance under variable loads and diverse modulation indices.Furthermore,the total harmonic distortion achieved with phase opposition disposition is 7.78%,outperforming alternative pulse width modulation techniques.In summary,it provides enhanced performance.Considering this,it is suitable for the photovoltaic system.
文摘A novel scheme for all-optical inverted wavelength conversion with 40-Gb/s pseudorandom bit sequences (PRBSs) based on a modified terahertz optical asymmetric demultiplexer (TOAD) is proposed. The performance of the proposed wavelength converter is analyzed in term of extinction ratio (ER) through numerical simulations. For a typical ER of 10 dB, some key characteristic parameters of the semiconductor optical amplifier (SOA) are designed. With the properly designed parameters, a high quality eye diagram is achievable, indicating that the amplitude fluctuation of the output signal is effectively reduced.
