Aiming at the lower microseismic localization accuracy in underground shallow distributed burst point localization based on time difference of arriva（TDOA）,this paper presents a method for microseismic localizati...Aiming at the lower microseismic localization accuracy in underground shallow distributed burst point localization based on time difference of arriva（TDOA）,this paper presents a method for microseismic localization based on group waves’ time difference information Firstly, extract the time difference corresponding to direct P wavers dominant frequency by utilizing its propagation characteristics. Secondly, construct TDOA model with non-prediction velocity and identify objective function of particle swarm optimization （PSO）. Afterwards, construct the initial particle swarm by using time difference information Finally, search the localization results in optimal solution space. The results of experimental verification show that the microseismic localization method proposed in this paper effectively enhances the localization accuracy of microseismic explosion source with positioning error less than 50 cm, which can satisfy the localization requirements of shallow burst point and has definite value for engineering application in underground space positioning field.展开更多
As an important application research topic of the intelligent aviation multi-station, collaborative detecting must overcome the problem of scouting measurement with status of 'fragmentation', and the NP-hardne...As an important application research topic of the intelligent aviation multi-station, collaborative detecting must overcome the problem of scouting measurement with status of 'fragmentation', and the NP-hardness problem of matching association between target and measurement in the process of scouting to data-link, which has complicated technical architecture of network construction. In this paper, taking advantage of cooperation mechanism on signal level in the aviation multi-station sympathetic network, a method of obtaining target time difference of arrival (TDOA) measurement using multi-station collaborative detecting based on time-frequency association is proposed. The method can not only achieve matching between target and its measurement, but also obtain TDOA measurement by further evolutionary transaction through refreshing sequential pulse time of arrival (TOA) measurement matrix for matching and correlating. Simulation results show that the accuracy of TDOA measurement has significant superiority over TOA, and detection probability of false TDOA measurement introduced by noise and fake measurement can be reduced effectively.展开更多
Fire rescue challenges and solutions have evolved from straightfor-ward plane rescue to encompass 3D space due to the rise of high-rise city buildings.Hence,this study facilitates a system with quick and simplified on...Fire rescue challenges and solutions have evolved from straightfor-ward plane rescue to encompass 3D space due to the rise of high-rise city buildings.Hence,this study facilitates a system with quick and simplified on-site launching and generates real-time location data,enabling fire rescuers to arrive at the intended spot faster and correctly for effective and precise rescue.Auto-positioning with step-by-step instructions is proposed when launching the locating system,while no extra measuring instrument like Total Station(TS)is needed.Real-time location tracking is provided via a 3D space real-time locating system(RTLS)constructed using Ultra-wide Bandwidth technology(UWB),which requires electromagnetic waves to pass through concrete walls.A hybrid weighted least squares with a time difference of arrival(WLS/TDOA)positioning method is proposed to address real path-tracking issues in 3D space and to meet RTLS requirements for quick computing in real-world applications.The 3D WLS/TDOA algorithm is theoretically constructed with the Cramer-Rao lower bound(CRLB).The computing complexity is reduced to the lower bound for embedded hardware to directly compute the time differential of the arriving signals using the time-to-digital converter(TDC).The results of the experiments show that the errors are controlled when the positioning algorithm is applied in various complicated situations to fulfill the requirements of engineering applications.The statistical analysis of the data reveals that the proposed UWB RTLS auto-positioning system can track target tags with an accuracy of 0.20 m.展开更多
To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)metho...To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)method to obtain the initial TDE.Secondly,a signal model using normalized cross spectrum is established,and the noise subspace is extracted by eigenvalue decomposition(EVD)of covariance matrix.Using the orthogonal relation between the steering vector and the noise subspace,the first-order Taylor expansion is carried out on the steering vector reconstructed by the initial TDE.Finally,the offsets are compensated via simple least squares(LS).Compared to other state-of-the-art methods,the proposed method significantly reduces the computational complexity and achieves better estimation performance.Experiments on both simulation and real-world data verify the efficiency of the proposed approach.展开更多
针对低空经济发展涉及的安全管理问题,在总结低空经济相关技术路线原理及落地方案的运行经验,分析低空安防普适性的4个建设方案:雷达与通感一体技术融合方案、广播式自动相关监视技术方案、远程识别技术方案和基于TDOA(time difference ...针对低空经济发展涉及的安全管理问题,在总结低空经济相关技术路线原理及落地方案的运行经验,分析低空安防普适性的4个建设方案:雷达与通感一体技术融合方案、广播式自动相关监视技术方案、远程识别技术方案和基于TDOA(time difference of arrival)无线电技术的多源融合方案的基础上,构建无人飞行器探测技术评价指标体系,并建立了一种基于决策试验评估实验室(decision-making trial and evaluation laboratory, DEMATEL)和优劣解距离法(technique for order preference by similarity to an ideal solution, TOPSIS)的多属性评价方法。结果发现,以TDOA为基础的多源融合方案是构建城市低空安防体系的有效路径和普适性方案。研究表明,低空安防体系的建设是一个系统性工程,需要政府、企业和社会各方的共同努力,在技术、数据、运营等多个层面进行整合,以适应未来低空经济的发展需求。展开更多
The radar radiation source signals hold extremely high reconnaissance value.Accurately positioning these signals constitutes one of the key technologies in safeguarding the security of the electromagnetic space.The po...The radar radiation source signals hold extremely high reconnaissance value.Accurately positioning these signals constitutes one of the key technologies in safeguarding the security of the electromagnetic space.The positioning error in multi-station scenarios is influenced not only by the accuracy of positioning parameter estimation but also by the geometric configuration of the positioning platform.This paper focuses on the direction of arrival(DOA),frequency difference of arrival(FDOA),and time difference of arrival(TDOA)methods,analyzing the optimal configuration,optimal detection area,and optimal position dilution of precision in both elevation-known and elevation-unknown scenarios.Specifically,the paper constructs a signal receiving model,establishes the corresponding positioning equations,and performs dimensional normalization on these equations to derive measurement values in meters.Through differential processing,the position dilution of precision is obtained,which is then used as the optimization function to determine the optimal configuration,optimal detection area,and optimal position dilution of precision.Simulation results validate the accuracy of the proposed formulas.展开更多
为识别铝合金板孔损伤位置及区域,以Lamb波为研究基础,提出基于魏格纳-威利分布(WVD,WignerVille distribution)和到达时间差值法(ATDM,arrival time difference method)的损伤识别技术。首先,采集实验铝合金板健康和有损模型的Lamb信号...为识别铝合金板孔损伤位置及区域,以Lamb波为研究基础,提出基于魏格纳-威利分布(WVD,WignerVille distribution)和到达时间差值法(ATDM,arrival time difference method)的损伤识别技术。首先,采集实验铝合金板健康和有损模型的Lamb信号,对其差值信号进行WVD分析,准确提取损伤反射信号到达时间;其次,通过ATDM建立各传感器间的距离差值关系,确定孔损伤位置中心并预测最大损伤半径,从而实现对孔损伤关键指标的识别;最后,通过数值模拟进一步验证该方法,结果表明,基于WVD/ATDM的损伤识别技术不仅能准确识别出孔损伤位置,而且能够有效地识别损伤区域面积。展开更多
This paper investigates the problem of target position estimation with a single-observer passive coherent location（PCL） system. An approach that combines angle with time difference of arrival（ATDOA） is used to est...This paper investigates the problem of target position estimation with a single-observer passive coherent location（PCL） system. An approach that combines angle with time difference of arrival（ATDOA） is used to estimate the location of a target. Compared with the TDOA-only method which needs two steps, the proposed method estimates the target position more directly. The constrained total least squares（CTLS） technique is applied in this approach. It achieves the Cramer–Rao lower bound（CRLB） when the parameter measurements are subject to small Gaussian-distributed errors. Performance analysis and the CRLB of this approach are also studied. Theory verifies that the ATDOA method gets a lower CRLB than the TDOA-only method with the same TDOA measuring error. It can also be seen that the position of the target affects estimating precision.At the same time, the locations of transmitters affect the precision and its gradient direction.Compared with the TDOA, the ATDOA method can obtain more precise target position estimation.Furthermore, the proposed method accomplishes target position estimation with a single transmitter,while the TDOA-only method needs at least four transmitters to get the target position. Furthermore,the transmitters＇ position errors also affect precision of estimation regularly.展开更多
Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimati...Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimation method is proposed and its Cramer-Rao low bound is derived in this paper. Firstly, second-order ambiguity function is utilized to reduce the dimensionality and estimate initial TDOA and differential Doppler rate. Secondly, the TDOA estimation is updated and FDOA is obtained using cross ambiguity function, in which relative Doppler com- panding is compensated by the existing differential Doppler rate. Thirdly, differential Doppler rate estimation is updated using cross estimator. Theoretical analysis on estimation variance and Cramer-Rao low bound shows that the final estimation of TDOA, FDOA and differential Doppler rate performs well at both low and high signal-noise ratio, although the initial estimation accuracy of TDOA and differential Doppler rate is relatively poor under low signal-noise ratio conditions. Simulation results finally verify the theoretical analysis and show that the proposed method can overcome relative Doppler companding problem and performs well for all TDOA, FDOA and differential Doppler rate estimation.展开更多
The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination （DPD） methods, with combined Time Difference of Arrival （TDOA） and Frequency Difference...The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination （DPD） methods, with combined Time Difference of Arrival （TDOA） and Frequency Difference of Arrival （FDOA）, do not perform well under low Signal-to-Noise Ratio （SNR）, and worse still, the computation cost is difficult to accept when the computational capabilities are limited. To get better positioning performance, we present a new DPD algorithm that proves to be more computationally efficient and more precise for weak signals than the conventional approach. The algorithm partitions the signal received with the same receiver into multiple non-overlapping short-time signal segments, and then uses the TDOA, the FDOA and the coherency among the short-time signals to locate the target. The fast maximum likelihood estimation, one iterative method based on particle filter, is designed to solve the problem of high computation load. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao Lower Bound （CRLB）. The simulation results show that the algorithm proposed in this paper outperforms the traditional DPD algorithms with more accurate results and higher computational efficiency, and especially at low SNR, it is more close to the CRLB.展开更多
For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved pe...For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved perfectly by calculating the target position with the joint TDOA and AOA location.On the condition of rectangular coordinates,first of all,it figures out the radial range between target and reference stations,then calculates the location of the target.In the case of polar coordinates,first of all,it figures out the azimuth between target and reference stations,then figures out the radial range between target and reference stations,finally obtains the location of the target.Simultaneously,simulation analyses show that the theoretical analysis is correct,and the proposed methods also provide the application of the joint TDOA and AOA location algorithm with the theoretical basis.展开更多
By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating ...By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.展开更多
This paper formulates a new framework to estimate the target position by adopting cuckoo search(CS)positioning algorithm. Addressing the nonlinear optimization problem is a crucial spot in the location system of time ...This paper formulates a new framework to estimate the target position by adopting cuckoo search(CS)positioning algorithm. Addressing the nonlinear optimization problem is a crucial spot in the location system of time difference of arrival(TDOA). With the application of the Levy flight mechanism, the preferential selection mechanism and the elimination mechanism, the proposed approach prevents positioning results from falling into local optimum. These intelligent mechanisms are useful to ensure the population diversity and improve the convergence speed. Simulation results demonstrate that the cuckoo localization algorithm has higher locating precision and better performance than the conventional methods. Compared with particle swarm optimization(PSO) algorithm and Newton iteration algorithm, the proposed method can obtain the Cram′er-Rao lower bound(CRLB) and quickly achieve the global optimal solutions.展开更多
To solve the problem of time difference of arrival(TDOA)positioning and tracking of targets by the unmanned aerial vehicles(UAV)swarm in future air combat,this paper adopts the TDOA positioning method and uses time di...To solve the problem of time difference of arrival(TDOA)positioning and tracking of targets by the unmanned aerial vehicles(UAV)swarm in future air combat,this paper adopts the TDOA positioning method and uses time difference sensors of the UAV swarm to locate target radiation sources.Firstly,a TDOA model for the target is set up for the UAV swarm under the condition that the error variance varies with the received signal-to-noise ratio.The accuracy of the positioning error is analyzed by geometric dilution of precision(GDOP).The D-optimality criterion of the positioning model is theoretically derived.The target is positioned and settled,and the maximum value of the Fisher information matrix determinant is used as the optimization objective function to optimize the track of the UAV in real time.Simulation results show that the track optimization improves the positioning accuracy and stability of the UAV swarm to the target.展开更多
Based on the time differences of arrival(TDOA) and frequency differences of arrival(FDOA) measurements of the given planar stationary radiation source, the joint TDOA/FDOA location algorithm which solves the location ...Based on the time differences of arrival(TDOA) and frequency differences of arrival(FDOA) measurements of the given planar stationary radiation source, the joint TDOA/FDOA location algorithm which solves the location of the target directly is proposed. Compared with weighted least squares(WLS) methods,the proposed algorithm is also suitable for well-posed conditions,and gets rid of the dependence on the constraints of Earth's surface. First of all, the solution formulas are expressed by the radial range. Then substitute it into the equation of the radial range to figure out the radial range between the target and the reference station. Finally use the solution expression of the target location to estimate the location of the target accurately. The proposed algorithm solves the problem that WLS methods have a large positioning error when the number of observation stations is not over-determined. Simulation results show the effectiveness of the proposed algorithm, including effectively increasing the positioning accuracy and reducing the number of observatories.展开更多
For the influence caused by multipath fading and non-line-of-sight(NLOS)transmission,it is challenging to accurately localize a moving signal source in complex environment by using the wireless sensor network(WSN)on t...For the influence caused by multipath fading and non-line-of-sight(NLOS)transmission,it is challenging to accurately localize a moving signal source in complex environment by using the wireless sensor network(WSN)on the ground.In this paper,we establish a special WSN in the sky to address this challenge,where each sensor is loaded on an unmanned aerial vehicle(UAV)and the operation center of all the UAVs is fixed on the ground.Based on the analyzing of the optimal distribution and the position error calibration of all the sensors,we formulate the localization scheme to estimate the position of the target source,which combines the time difference of arrival(TDOA)method and the frequency difference of arrival(FDOA)method.Then by employing the semidefinite programming approach,we accurately obtain the position and velocity of the signal source.In the simulation,the validity of the proposed method is verified through the performance comparison.展开更多
With the emergence of location-based applications in various fields, the higher accuracy of positioning is demanded. By utilizing the time differences of arrival （TDOAs） and gain ratios of arrival （GROAs）, an effi...With the emergence of location-based applications in various fields, the higher accuracy of positioning is demanded. By utilizing the time differences of arrival （TDOAs） and gain ratios of arrival （GROAs）, an efficient algorithm for estimating the position is proposed, which exploits the Broyden-Fletcher-Goldfarb-Shanno （BFGS） quasi-Newton method to solve nonlinear equations at the source location under the additive measurement error. Although the accuracy of two-step weighted-least-square （WLS） method based on TDOAs and GROAs is very high, this method has a high computational complexity. While the proposed approach can achieve the same accuracy and bias with the lower computational complexity when the signal-to-noise ratio （SNR） is high, especially it can achieve better accuracy and smaller bias at a lower SNR. The proposed algorithm can be applied to the actual environment due to its real-time property and good robust performance. Simulation results show that with a good initial guess to begin with, the proposed estimator converges to the true solution and achieves the Cramer-Rao lower bound （CRLB） accuracy for both near-field and far-field sources.展开更多
The source location based on the hybrid time difference of arrival(TDOA)/frequency difference of arrival(FDOA) is a basic problem in wireless sensor networks, and the layout of sensors in the hybrid TDOA/FDOA position...The source location based on the hybrid time difference of arrival(TDOA)/frequency difference of arrival(FDOA) is a basic problem in wireless sensor networks, and the layout of sensors in the hybrid TDOA/FDOA positioning will greatly affect the accuracy of positioning. Using unmanned aerial vehicle(UAV) as base stations, by optimizing the trajectory of the UAV swarm, an optimal positioning configuration is formed to improve the accuracy of the target position and velocity estimation. In this paper, a hybrid TDOA/FDOA positioning model is first established, and the positioning accuracy of the hybrid TDOA/FDOA under different positioning configurations and different measurement errors is simulated by the geometric dilution of precision(GDOP) factor. Second, the Cramer-Rao lower bound(CRLB) matrix of hybrid TDOA/FDOA location under different moving states of the target is derived theoretically, the objective function of the track optimization is obtained, and the track of the UAV swarm is optimized in real time. The simulation results show that the track optimization effectively improves the accuracy of the target position and velocity estimation.展开更多
This paper considers the problem of geolocating a target on the Earth surface whose altitude is known previously using the target signal time difference of arrival （TDOA） and frequency difference of arrival （FDOA）...This paper considers the problem of geolocating a target on the Earth surface whose altitude is known previously using the target signal time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements obtained at satellites. The number of satellites available for the geolocation task is more than sufficient and their locations are subject to random errors. This paper derives the constrained Cramor-Rao lower bound （CCRLB） of the target position, and on the basis of the CCRLB analysis, an approximately efficient constrained maximum likelihood estimator （CMLE） for geolocating the target is established. A new iterative algorithm for solving the CMLE is then proposed, where the updated target position estimate is shown to be the globally optimal solution to a generalized trust region sub-problem （GTRS） which can be found via a simple bisection search. First-order mean square error （MSE） analysis is conducted to quantify the performance degradation when the known target altitude is assumed to be precise but indeed has an unknown but deterministic error. Computer simulations are used to compare the performance of the proposed iterative geolocation technique with those of two benchmark algorithms. They verify the approximate efficiency of the proposed algorithm and the validity of the MSE analysis.展开更多
基金National Natural Science Foundation of China(No.61227003)National Program on Key Basic Research Program(973Program)(No.2013CB311804)
文摘Aiming at the lower microseismic localization accuracy in underground shallow distributed burst point localization based on time difference of arriva（TDOA）,this paper presents a method for microseismic localization based on group waves’ time difference information Firstly, extract the time difference corresponding to direct P wavers dominant frequency by utilizing its propagation characteristics. Secondly, construct TDOA model with non-prediction velocity and identify objective function of particle swarm optimization （PSO）. Afterwards, construct the initial particle swarm by using time difference information Finally, search the localization results in optimal solution space. The results of experimental verification show that the microseismic localization method proposed in this paper effectively enhances the localization accuracy of microseismic explosion source with positioning error less than 50 cm, which can satisfy the localization requirements of shallow burst point and has definite value for engineering application in underground space positioning field.
基金supported by the National Natural Science Foundation of China(61472443)the Basic Research Priorities Program of Shaanxi Province Natural Science Foundation of China(2013JQ8042)
文摘As an important application research topic of the intelligent aviation multi-station, collaborative detecting must overcome the problem of scouting measurement with status of 'fragmentation', and the NP-hardness problem of matching association between target and measurement in the process of scouting to data-link, which has complicated technical architecture of network construction. In this paper, taking advantage of cooperation mechanism on signal level in the aviation multi-station sympathetic network, a method of obtaining target time difference of arrival (TDOA) measurement using multi-station collaborative detecting based on time-frequency association is proposed. The method can not only achieve matching between target and its measurement, but also obtain TDOA measurement by further evolutionary transaction through refreshing sequential pulse time of arrival (TOA) measurement matrix for matching and correlating. Simulation results show that the accuracy of TDOA measurement has significant superiority over TOA, and detection probability of false TDOA measurement introduced by noise and fake measurement can be reduced effectively.
文摘Fire rescue challenges and solutions have evolved from straightfor-ward plane rescue to encompass 3D space due to the rise of high-rise city buildings.Hence,this study facilitates a system with quick and simplified on-site launching and generates real-time location data,enabling fire rescuers to arrive at the intended spot faster and correctly for effective and precise rescue.Auto-positioning with step-by-step instructions is proposed when launching the locating system,while no extra measuring instrument like Total Station(TS)is needed.Real-time location tracking is provided via a 3D space real-time locating system(RTLS)constructed using Ultra-wide Bandwidth technology(UWB),which requires electromagnetic waves to pass through concrete walls.A hybrid weighted least squares with a time difference of arrival(WLS/TDOA)positioning method is proposed to address real path-tracking issues in 3D space and to meet RTLS requirements for quick computing in real-world applications.The 3D WLS/TDOA algorithm is theoretically constructed with the Cramer-Rao lower bound(CRLB).The computing complexity is reduced to the lower bound for embedded hardware to directly compute the time differential of the arriving signals using the time-to-digital converter(TDC).The results of the experiments show that the errors are controlled when the positioning algorithm is applied in various complicated situations to fulfill the requirements of engineering applications.The statistical analysis of the data reveals that the proposed UWB RTLS auto-positioning system can track target tags with an accuracy of 0.20 m.
基金supported in part by National Key R&D Program of China under Grants 2020YFB1807602 and 2020YFB1807600National Science Foundation of China(61971217,61971218,61631020,61601167)+1 种基金the Fund of Sonar Technology Key Laboratory(Range estimation and location technology of passive target viamultiple array combination),Jiangsu Planned Projects for Postdoctoral Research Funds(2020Z013)China Postdoctoral Science Foundation(2020M681585).
文摘To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)method to obtain the initial TDE.Secondly,a signal model using normalized cross spectrum is established,and the noise subspace is extracted by eigenvalue decomposition(EVD)of covariance matrix.Using the orthogonal relation between the steering vector and the noise subspace,the first-order Taylor expansion is carried out on the steering vector reconstructed by the initial TDE.Finally,the offsets are compensated via simple least squares(LS).Compared to other state-of-the-art methods,the proposed method significantly reduces the computational complexity and achieves better estimation performance.Experiments on both simulation and real-world data verify the efficiency of the proposed approach.
文摘针对低空经济发展涉及的安全管理问题,在总结低空经济相关技术路线原理及落地方案的运行经验,分析低空安防普适性的4个建设方案:雷达与通感一体技术融合方案、广播式自动相关监视技术方案、远程识别技术方案和基于TDOA(time difference of arrival)无线电技术的多源融合方案的基础上,构建无人飞行器探测技术评价指标体系,并建立了一种基于决策试验评估实验室(decision-making trial and evaluation laboratory, DEMATEL)和优劣解距离法(technique for order preference by similarity to an ideal solution, TOPSIS)的多属性评价方法。结果发现,以TDOA为基础的多源融合方案是构建城市低空安防体系的有效路径和普适性方案。研究表明,低空安防体系的建设是一个系统性工程,需要政府、企业和社会各方的共同努力,在技术、数据、运营等多个层面进行整合,以适应未来低空经济的发展需求。
基金supported by the National Natural Science Foundation of China(Nos.62027801,62301035).
文摘The radar radiation source signals hold extremely high reconnaissance value.Accurately positioning these signals constitutes one of the key technologies in safeguarding the security of the electromagnetic space.The positioning error in multi-station scenarios is influenced not only by the accuracy of positioning parameter estimation but also by the geometric configuration of the positioning platform.This paper focuses on the direction of arrival(DOA),frequency difference of arrival(FDOA),and time difference of arrival(TDOA)methods,analyzing the optimal configuration,optimal detection area,and optimal position dilution of precision in both elevation-known and elevation-unknown scenarios.Specifically,the paper constructs a signal receiving model,establishes the corresponding positioning equations,and performs dimensional normalization on these equations to derive measurement values in meters.Through differential processing,the position dilution of precision is obtained,which is then used as the optimization function to determine the optimal configuration,optimal detection area,and optimal position dilution of precision.Simulation results validate the accuracy of the proposed formulas.
文摘为识别铝合金板孔损伤位置及区域,以Lamb波为研究基础,提出基于魏格纳-威利分布(WVD,WignerVille distribution)和到达时间差值法(ATDM,arrival time difference method)的损伤识别技术。首先,采集实验铝合金板健康和有损模型的Lamb信号,对其差值信号进行WVD分析,准确提取损伤反射信号到达时间;其次,通过ATDM建立各传感器间的距离差值关系,确定孔损伤位置中心并预测最大损伤半径,从而实现对孔损伤关键指标的识别;最后,通过数值模拟进一步验证该方法,结果表明,基于WVD/ATDM的损伤识别技术不仅能准确识别出孔损伤位置,而且能够有效地识别损伤区域面积。
基金supported by the National High Technology Research and Development Program of China(863 Program)(No.2012AA7031015)
文摘This paper investigates the problem of target position estimation with a single-observer passive coherent location（PCL） system. An approach that combines angle with time difference of arrival（ATDOA） is used to estimate the location of a target. Compared with the TDOA-only method which needs two steps, the proposed method estimates the target position more directly. The constrained total least squares（CTLS） technique is applied in this approach. It achieves the Cramer–Rao lower bound（CRLB） when the parameter measurements are subject to small Gaussian-distributed errors. Performance analysis and the CRLB of this approach are also studied. Theory verifies that the ATDOA method gets a lower CRLB than the TDOA-only method with the same TDOA measuring error. It can also be seen that the position of the target affects estimating precision.At the same time, the locations of transmitters affect the precision and its gradient direction.Compared with the TDOA, the ATDOA method can obtain more precise target position estimation.Furthermore, the proposed method accomplishes target position estimation with a single transmitter,while the TDOA-only method needs at least four transmitters to get the target position. Furthermore,the transmitters＇ position errors also affect precision of estimation regularly.
基金supported by the National Natural Science Foundation of China(No.61671273)
文摘Considering the estimation accuracy reduction of Frequency Difference of Arrival （FDOA） caused by relative Doppler companding, a joint Time Difference of Arrival （TDOA）, FDOA and differential Doppler rate estimation method is proposed and its Cramer-Rao low bound is derived in this paper. Firstly, second-order ambiguity function is utilized to reduce the dimensionality and estimate initial TDOA and differential Doppler rate. Secondly, the TDOA estimation is updated and FDOA is obtained using cross ambiguity function, in which relative Doppler com- panding is compensated by the existing differential Doppler rate. Thirdly, differential Doppler rate estimation is updated using cross estimator. Theoretical analysis on estimation variance and Cramer-Rao low bound shows that the final estimation of TDOA, FDOA and differential Doppler rate performs well at both low and high signal-noise ratio, although the initial estimation accuracy of TDOA and differential Doppler rate is relatively poor under low signal-noise ratio conditions. Simulation results finally verify the theoretical analysis and show that the proposed method can overcome relative Doppler companding problem and performs well for all TDOA, FDOA and differential Doppler rate estimation.
基金supported by the National Natural Science Foundation of China(No.61401513)
文摘The localization of a stationary transmitter using moving receivers is considered. The original Direct Position Determination （DPD） methods, with combined Time Difference of Arrival （TDOA） and Frequency Difference of Arrival （FDOA）, do not perform well under low Signal-to-Noise Ratio （SNR）, and worse still, the computation cost is difficult to accept when the computational capabilities are limited. To get better positioning performance, we present a new DPD algorithm that proves to be more computationally efficient and more precise for weak signals than the conventional approach. The algorithm partitions the signal received with the same receiver into multiple non-overlapping short-time signal segments, and then uses the TDOA, the FDOA and the coherency among the short-time signals to locate the target. The fast maximum likelihood estimation, one iterative method based on particle filter, is designed to solve the problem of high computation load. A secondary but important result is a derivation of closed-form expressions of the Cramer-Rao Lower Bound （CRLB）. The simulation results show that the algorithm proposed in this paper outperforms the traditional DPD algorithms with more accurate results and higher computational efficiency, and especially at low SNR, it is more close to the CRLB.
基金supported by the National Natural Science Foundation of China(6107210761271300)+4 种基金the Shaanxi Industry Surmount Foundation(2012K06-12)the Arm and Equipment Pre-research Foundationthe Fundamental Research Funds for the Central Universities of China(K0551302006K5051202045K50511020024)
文摘For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved perfectly by calculating the target position with the joint TDOA and AOA location.On the condition of rectangular coordinates,first of all,it figures out the radial range between target and reference stations,then calculates the location of the target.In the case of polar coordinates,first of all,it figures out the azimuth between target and reference stations,then figures out the radial range between target and reference stations,finally obtains the location of the target.Simultaneously,simulation analyses show that the theoretical analysis is correct,and the proposed methods also provide the application of the joint TDOA and AOA location algorithm with the theoretical basis.
基金supported by the National High Technology Research and Development Program of China (863 Program) (2010AA7010422 2011AA7014061)
文摘By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.
基金the National Natural Science Foundation of China(No.61571146)the Fundamental Research Funds for the Central Universities of China(No.HEUCFP201769)
文摘This paper formulates a new framework to estimate the target position by adopting cuckoo search(CS)positioning algorithm. Addressing the nonlinear optimization problem is a crucial spot in the location system of time difference of arrival(TDOA). With the application of the Levy flight mechanism, the preferential selection mechanism and the elimination mechanism, the proposed approach prevents positioning results from falling into local optimum. These intelligent mechanisms are useful to ensure the population diversity and improve the convergence speed. Simulation results demonstrate that the cuckoo localization algorithm has higher locating precision and better performance than the conventional methods. Compared with particle swarm optimization(PSO) algorithm and Newton iteration algorithm, the proposed method can obtain the Cram′er-Rao lower bound(CRLB) and quickly achieve the global optimal solutions.
基金This work was supported by the National Natural Science Foundation of China(61502522)the Equipment Pre-Research Field Fund(JZX7Y20190253036101)+1 种基金the Equipment Pre-Research Ministry of Education Joint Fund(6141A02033703)the Hubei Provincial Natural Science Foundation(2019CFC897).
文摘To solve the problem of time difference of arrival(TDOA)positioning and tracking of targets by the unmanned aerial vehicles(UAV)swarm in future air combat,this paper adopts the TDOA positioning method and uses time difference sensors of the UAV swarm to locate target radiation sources.Firstly,a TDOA model for the target is set up for the UAV swarm under the condition that the error variance varies with the received signal-to-noise ratio.The accuracy of the positioning error is analyzed by geometric dilution of precision(GDOP).The D-optimality criterion of the positioning model is theoretically derived.The target is positioned and settled,and the maximum value of the Fisher information matrix determinant is used as the optimization objective function to optimize the track of the UAV in real time.Simulation results show that the track optimization improves the positioning accuracy and stability of the UAV swarm to the target.
基金supported by the National Natural Science Foundation of China(6140236561271300)the 13th Five-Year Weaponry PreResearch Project。
文摘Based on the time differences of arrival(TDOA) and frequency differences of arrival(FDOA) measurements of the given planar stationary radiation source, the joint TDOA/FDOA location algorithm which solves the location of the target directly is proposed. Compared with weighted least squares(WLS) methods,the proposed algorithm is also suitable for well-posed conditions,and gets rid of the dependence on the constraints of Earth's surface. First of all, the solution formulas are expressed by the radial range. Then substitute it into the equation of the radial range to figure out the radial range between the target and the reference station. Finally use the solution expression of the target location to estimate the location of the target accurately. The proposed algorithm solves the problem that WLS methods have a large positioning error when the number of observation stations is not over-determined. Simulation results show the effectiveness of the proposed algorithm, including effectively increasing the positioning accuracy and reducing the number of observatories.
基金supported by The Science and Technology Innovation Team Plan of Shaanxi Province (2017-KCT-30-02)The Key Research and Development Program of Shaanxi Province (2018GY-150)+1 种基金The Foundation Research Project of Shaanxi Province (The Natural Science Fund. 2018JQ6093)The Science and Technology Plan Project of Xi’an City (201805040YD18CG24-3)
文摘For the influence caused by multipath fading and non-line-of-sight(NLOS)transmission,it is challenging to accurately localize a moving signal source in complex environment by using the wireless sensor network(WSN)on the ground.In this paper,we establish a special WSN in the sky to address this challenge,where each sensor is loaded on an unmanned aerial vehicle(UAV)and the operation center of all the UAVs is fixed on the ground.Based on the analyzing of the optimal distribution and the position error calibration of all the sensors,we formulate the localization scheme to estimate the position of the target source,which combines the time difference of arrival(TDOA)method and the frequency difference of arrival(FDOA)method.Then by employing the semidefinite programming approach,we accurately obtain the position and velocity of the signal source.In the simulation,the validity of the proposed method is verified through the performance comparison.
基金supported by the Major National Science&Technology Projects(2010ZX03006-002-04)the National Natural Science Foundation of China(61072070)+4 种基金the Doctorial Programs Foundation of the Ministry of Education(20110203110011)the"111 Project"(B08038)the Fundamental Research Funds of the Ministry of Education(72124338)the Key Programs for Natural Science Foundation of Shanxi Province(2012JZ8002)the Foundation of State Key Laboratory of Integrated Services Networks(ISN1101002)
文摘With the emergence of location-based applications in various fields, the higher accuracy of positioning is demanded. By utilizing the time differences of arrival （TDOAs） and gain ratios of arrival （GROAs）, an efficient algorithm for estimating the position is proposed, which exploits the Broyden-Fletcher-Goldfarb-Shanno （BFGS） quasi-Newton method to solve nonlinear equations at the source location under the additive measurement error. Although the accuracy of two-step weighted-least-square （WLS） method based on TDOAs and GROAs is very high, this method has a high computational complexity. While the proposed approach can achieve the same accuracy and bias with the lower computational complexity when the signal-to-noise ratio （SNR） is high, especially it can achieve better accuracy and smaller bias at a lower SNR. The proposed algorithm can be applied to the actual environment due to its real-time property and good robust performance. Simulation results show that with a good initial guess to begin with, the proposed estimator converges to the true solution and achieves the Cramer-Rao lower bound （CRLB） accuracy for both near-field and far-field sources.
基金supported by the National Natural Science Foundation of China (61502522)Equipment Pre-Research Field Fund(JZX7Y20190253036101)+1 种基金Equipment Pre-Research Ministry of Education Joint Fund (6141A02033703)Hubei Provincial Natural Scie nce Foundation (2019CFC897)。
文摘The source location based on the hybrid time difference of arrival(TDOA)/frequency difference of arrival(FDOA) is a basic problem in wireless sensor networks, and the layout of sensors in the hybrid TDOA/FDOA positioning will greatly affect the accuracy of positioning. Using unmanned aerial vehicle(UAV) as base stations, by optimizing the trajectory of the UAV swarm, an optimal positioning configuration is formed to improve the accuracy of the target position and velocity estimation. In this paper, a hybrid TDOA/FDOA positioning model is first established, and the positioning accuracy of the hybrid TDOA/FDOA under different positioning configurations and different measurement errors is simulated by the geometric dilution of precision(GDOP) factor. Second, the Cramer-Rao lower bound(CRLB) matrix of hybrid TDOA/FDOA location under different moving states of the target is derived theoretically, the objective function of the track optimization is obtained, and the track of the UAV swarm is optimized in real time. The simulation results show that the track optimization effectively improves the accuracy of the target position and velocity estimation.
基金co-supported by the National Natural Science Foundation of China (Nos. 61304264 and 61305017)the Innovation Foundation of Industry, Education and Research of Jiangsu Province (No. BY2014023-25)
文摘This paper considers the problem of geolocating a target on the Earth surface whose altitude is known previously using the target signal time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements obtained at satellites. The number of satellites available for the geolocation task is more than sufficient and their locations are subject to random errors. This paper derives the constrained Cramor-Rao lower bound （CCRLB） of the target position, and on the basis of the CCRLB analysis, an approximately efficient constrained maximum likelihood estimator （CMLE） for geolocating the target is established. A new iterative algorithm for solving the CMLE is then proposed, where the updated target position estimate is shown to be the globally optimal solution to a generalized trust region sub-problem （GTRS） which can be found via a simple bisection search. First-order mean square error （MSE） analysis is conducted to quantify the performance degradation when the known target altitude is assumed to be precise but indeed has an unknown but deterministic error. Computer simulations are used to compare the performance of the proposed iterative geolocation technique with those of two benchmark algorithms. They verify the approximate efficiency of the proposed algorithm and the validity of the MSE analysis.
