The development of bifunctional electrocatalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)at high current density under industrial temperatures is crucial for large-scale industrial hydrog...The development of bifunctional electrocatalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)at high current density under industrial temperatures is crucial for large-scale industrial hydrogen production from water splitting.In this work,M-MnO_(2)@TNTA composite electrodes were prepared by depositing various metal ion-doped manganese oxide nanoparticles on the titania nanotube array(TNTA)by successive ionic layer adsorption reaction(SILAR)method,and their HER and OER electrocatalytic performances were investigated in 1 M KOH.Results show that the CoFe-MnO_(2)@TNTA composite electrode prepared by simultaneous doping of Co^(3+)and Fe^(3+)in MnO_(2) exhibits optimal catalytic performance.Compared with MnO_(2)@TNTA without ion doping,the overpotentials of CoFe-MnO_(2)@TNTA at 10 mA cm^(-2)(η_(10))for HER and OER are reduced by 571 and 665 mV.In addition,the electrode perfor-mance can be significantly enhanced by increasing the test temperature,and the porous array structure enables CoFe-MnO_(2)@TNTA to exhibit better performance at high current densities.At 50℃,which is the common industrial electrolytic water temperature,the η_(10) of CoFe-MnO_(2)@TNTA for HER is almost equal to that of the Pt/C electrode.The η_(100) of CoFe-MnO_(2)@TNTA for HER is reduced by 35 mV compared with the Pt/C electrode.Moreover,η_(200) of CoFe-MnO_(2)@TNTA for OER is significantly lowered by 111 and 184 mV compared with IrO_(2) and RuO_(2) electrodes.Utilizing CoFe-MnO_(2)@TNTA as both the cathode and anode for overall water splitting,the electrolysis voltage is merely 2.33 V under the current density of 200 mA cm^(-2),much lower than that of IrO_(2)(+)||Pt/C(-)(2.68 V).The present work may provide a valuable reference for the development of self-supporting bifunctional electrodes suitable for high-current-density water splitting at industrial temperatures.展开更多
A PbO2/Sb-SnO2/TiO2 nanotube array composite electrode was successfully synthesized and its electrochemical oxidation properties were investigated.Field-emission scanning electron microscopy(FE-SEM)and X-ray diffracti...A PbO2/Sb-SnO2/TiO2 nanotube array composite electrode was successfully synthesized and its electrochemical oxidation properties were investigated.Field-emission scanning electron microscopy(FE-SEM)and X-ray diffraction(XRD)results showed that the PbO2 coating was composed of anα-PbO2 inner layer and aβ-PbO2 outer layer.Accelerated life measurement indicated that the composite electrode had a lifetime of 815 h.Rhodamine B(RhB)was employed as a model pollutant to analyze the electrocatalytic activity of the electrode.The effects of initial RhB concentration,current density,initial pH,temperature,and chloride ion concentration on the electrochemical oxidation were investigated in detail.Inductively coupled plasma atomic emission spectroscopy(ICP-AES)results suggested that the concentration of leached Pb^2+in the electrolyte during the electrocatalytic oxidation process can be neglected.Finally,the degradation mechanism during the electrocatalytic oxidation process was proposed based on the results of solid-phase micro-extraction-gas chromatography-mass spectrometry(SPME-GC-MS).The high electrocatalytic performance of the composite electrode makes it a promising anode for the treatment of organic pollutants in aqueous solution.展开更多
Direct electrochemical reduction of CO2 to multicarbon products is highly desirable, yet challenging. Here, we present a potentiostatic pulse-electrodeposition of high-aspect-ratio CuxAuy nanowire arrays (NWAs) as hig...Direct electrochemical reduction of CO2 to multicarbon products is highly desirable, yet challenging. Here, we present a potentiostatic pulse-electrodeposition of high-aspect-ratio CuxAuy nanowire arrays (NWAs) as high-performance electrocatalysts for the CO2 reduction reaction (CO2RR). The surface electronic structure related to the Cu:Au ratio in the CuxAuy NWAs could be facilely modulated by controlling the electrodeposition potential and the as-fabricated CuxAuy NWAs could be directly used as the catalytic electrode for the CO2RR. The morphology of the high-aspect-ratio nanowire array significantly lowers the onset potential of the alcohol formation due to the diffusion-induced enhancement of the local pH and CO concentration near the nanowire surface. Besides, the properly adjusted surface electronic structure of the CuxAuy NWA enables the adsorption of CO and facilitates the subsequent CO reduction to ethanol via the C-C coupling pathway. Owing to the synergistic effect of morphology and electronic structure, the optimized CuxAuy NWA selectively reduces CO2 to ethanol at low potentials of -0.5——0.7 V vs. RHE with a highest Faradaic efficiency of 48%. This work demonstrates the feasibility to optimize the activity and selectivity of the Cu-based electrocatalysts toward multicarbon alcohols for the CO2RR via simultaneous adjustment of the electronic structure and morphology of the catalysts.展开更多
TiO2 nanotube arrays were prepared by means of an electrochemical anodization technique in an organic electrolyte solution doped with polyvinyl pyrrolidone (PVP) and were subsequently modified with phosphomolybdic aci...TiO2 nanotube arrays were prepared by means of an electrochemical anodization technique in an organic electrolyte solution doped with polyvinyl pyrrolidone (PVP) and were subsequently modified with phosphomolybdic acid (PMoA) to obtain PMoA/TiO2 nanotube arrays. The microstructure and photochromic properties were investigated via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), and X-ray photoelectron spectroscopy (XPS). The results indicated that the Keggin structure of PMoA and the nanotube structure of TiO2 were not destroyed, and there was a strong degree of interaction between PMoA and TiO2 at the biphasic interface with lattice interlacing during the compositing process. The XPS results further indicated that there was a change in the chemical microenvironment during the formation process of the composite, and a new charge transfer bridge was formed through the Mo-O-Ti bond. Under visible light irradiation, the colorless PMoA/TiO2 nanotube array quickly turned blue and exhibited a photochromic response together with reversible photochromism in the presence of H2O2. After visible light irradiation for 60s, the appearance of Mo^5+ species in the XPS spectra indicated a photoreduction process in accordance with a photoinduced electron transfer mechanism.展开更多
Copper and titanium remain relatively plentiful in earth crust.Therefore,using them in solar energy conversion technologies are of significant interest.In this work,cuprous oxide（Cu2O）-modified short TiO2 nanotube a...Copper and titanium remain relatively plentiful in earth crust.Therefore,using them in solar energy conversion technologies are of significant interest.In this work,cuprous oxide（Cu2O）-modified short TiO2 nanotube array electrode was prepared based on the following two design ideas:first,the short titania nanotubes obtained from sonoelectrochemical anodization possess excellent charge separation and transportation properties as well as desirable mechanical stability;second,the sonoelectrochemical deposition technique favours the improvement in the combination between Cu2O and TiO2 nanotubes,and favours the dispersion of Cu2O particles.UV-Vis absorption and photo-electronchemical measurements proved that the Cu2O coating extended the visible spectrum absorption and the solar spectrum-induced photocurrent response.Under AM1.5 irradiation,the photocurrent density of the composite electrode（i.e.sonoelectrochemical deposition for 5 min） was more than 4.75 times as high as the pure nanotube electrode.Comparing the photoactivity of the Cu2O/TiO2 electrode obtained using sonoelectrochemical deposition with others that synthesized using plain electrochemical deposition,the photocurrent density of the former electrode was 2.2 times higher than that of the latter when biased at 1.0 V（vs.Ag/AgCl）.The reproducible photocurrent response under intermittent illumination demonstrated the excellent stability of the composite electrode.Such kind of composite electrode material will have many potential applications in solar cell and other fields.展开更多
Neuronal connections can be detected by neuronal network discharges in hippocampal neurons cultured on multi-electrodes.However,the multi-electrode-array（MEA）has not been widely used in hippocampal slice culture stu...Neuronal connections can be detected by neuronal network discharges in hippocampal neurons cultured on multi-electrodes.However,the multi-electrode-array（MEA）has not been widely used in hippocampal slice culture studies focused on epilepsy.The present study induced spontaneous synchronous epileptiform activity using low Mg2＋artificial cerebrospinal fluid on acute hippocampal slices to record hippocampal discharges with MEA.Results showed that burst duration and average number of spikes in a burst were significantly greater in the CA3 compared with dentate gyrus and CA1 areas.In Schaffer cut-off group,CA1 area discharges disappeared,but synchronous discharges remained in the CA3 area.Moreover,synchronous discharge frequency in the Schaffer cut-off group was similar to control.However,burst duration and average number of spikes in a burst were significantly decreased compared with control（P 〈 0.05）.Results demonstrated that highest neuronal excitability occurred in the CA3 area,and synchronous discharges induced by low Mg2＋originated from the CA3 region.展开更多
The conventional computing architecture faces substantial chal-lenges,including high latency and energy consumption between memory and processing units.In response,in-memory computing has emerged as a promising altern...The conventional computing architecture faces substantial chal-lenges,including high latency and energy consumption between memory and processing units.In response,in-memory computing has emerged as a promising alternative architecture,enabling computing operations within memory arrays to overcome these limitations.Memristive devices have gained significant attention as key components for in-memory computing due to their high-density arrays,rapid response times,and ability to emulate biological synapses.Among these devices,two-dimensional(2D)material-based memristor and memtransistor arrays have emerged as particularly promising candidates for next-generation in-memory computing,thanks to their exceptional performance driven by the unique properties of 2D materials,such as layered structures,mechanical flexibility,and the capability to form heterojunctions.This review delves into the state-of-the-art research on 2D material-based memristive arrays,encompassing critical aspects such as material selection,device perfor-mance metrics,array structures,and potential applications.Furthermore,it provides a comprehensive overview of the current challenges and limitations associated with these arrays,along with potential solutions.The primary objective of this review is to serve as a significant milestone in realizing next-generation in-memory computing utilizing 2D materials and bridge the gap from single-device characterization to array-level and system-level implementations of neuromorphic computing,leveraging the potential of 2D material-based memristive devices.展开更多
Rational coupling of hydrogen evolution reaction(HER) and oxygen evolution reaction(OER) catalysts is extremely important for practical overall water splitting,but it is still challenging to construct such bifunctiona...Rational coupling of hydrogen evolution reaction(HER) and oxygen evolution reaction(OER) catalysts is extremely important for practical overall water splitting,but it is still challenging to construct such bifunctional heterostructures.Herein,we present a metal-organic framework(MOF)-etching strategy to design free-standing and hierarchical hollow CoS_(2)-MoS_(2) heteronanosheet arrays for both HER and OER.Resulting from the controllable etching of MOF by MoO_(4)^(2-) and in-situ sulfuration,the obtained CoS_(2)-MoS_(2) possesses abundant heterointerfaces with modulated local charge distribution,which promote water dissociation and rapid electrocatalytic kinetics.Moreover,the two-dimensional hollow array architecture can not only afford rich surface-active sites,but also facilitate the penetration of electrolytes and the release of evolved H_(2)/O_(2) bubbles.Consequently,the engineered CoS_(2)-MoS_(2) heterostructure exhibits small overpotentials of 82 mV for HER and 266 mV for OER at 10 mA cm^(-2).The corresponding alkaline electrolyzer affords a cell voltage of 1.56 V at 10 mA cm^(-2) to boost overall water splitting,along with robust durability over 24 h, even surpassing the benchmark electrode couple composed of IrO_(2) and Pt/C The present work may provide valuable insights for developing MOF-derived heterogeneous electrocatalysts with tailored interface/surface structure for widespread application in catalysis and other energyrelated areas.展开更多
Developing non-expensive, highly active and highly stable electrocatalysts for hydrogen evolution has aroused extensive attention, owing to the necessity of novel clean and sustainable energy carriers. In this paper, ...Developing non-expensive, highly active and highly stable electrocatalysts for hydrogen evolution has aroused extensive attention, owing to the necessity of novel clean and sustainable energy carriers. In this paper, we report a synthesis of free-standing three-dimensional hierarchical MoS_2/CoS_2 heterostructure arrays through a convenient process. The investigation of electrocatalytic HER performance suggests that the MoS_2/CoS_2 hybrid catalyst exhibits significant enhancement in HER(onsetpotential and potential at a current density of 100 mA cm^(-2) are 20 mV and125 mV, respectively) and superior durability(no shift of current density is observed after a continuous scanning of 3000 times) compared with individual CoS_2 and MoS_2. The superior HER performance was attributed to the formation of the interface between CoS_2 and MoS_2 through the electrochemical characterization, Raman, XPS analysis, and the control experiment. The lower onsetpotential, higher current density, excellent durability, and the free-standing structure of the three-dimensional hierarchical MoS_2/CoS_2 heterostructure array make it a promising cathode catalyst suitable for widespread application.展开更多
Three-dimensional(3D) thin-film electrodes are promising solution to the volume change of active materials in lithium-ion batteries.As a conductive current collector,the 3D TiO_(2) nanotube array networks(TNAs) have a...Three-dimensional(3D) thin-film electrodes are promising solution to the volume change of active materials in lithium-ion batteries.As a conductive current collector,the 3D TiO_(2) nanotube array networks(TNAs) have a one-dimensional stable electronic conductive path and increase the adhesion between the current collector and raw material,thereby improving the cycle stability of active materials.In this study,a novel 3D-TNAs@Sb_(2)S_(3) anode was fabricated by directly depositing natural stibnite onto3D TNAs.The adhesion of Sb_(2)S_(3) particles to the substrate was enhanced due to the large surface area provided by 3D-TNAs.Moreover,the porous layered structure composed of Sb_(2)S_(3) nanoparticles relieved the stress generated during lithiation and adapted to the volume change of Sb_(2)S_(3) during cycling.Therefore,the resulting composite anode exhibits high cycle and rate performance,reaching0.36 mAh·cm^(-2) after 80 cycles at the galvanostatic rate of1 mA·cm^(-2),with high coulombic efficiency of 98%.展开更多
A 4×4 beta-phase gallium oxide(β-Ga_(2)O_(3))deep-ultraviolet(DUV)rectangular 10-fingers interdigital metalsemiconductor-metal(MSM)photodetector array of high photo responsivity is introduced.The Ga2O_(3)thin fi...A 4×4 beta-phase gallium oxide(β-Ga_(2)O_(3))deep-ultraviolet(DUV)rectangular 10-fingers interdigital metalsemiconductor-metal(MSM)photodetector array of high photo responsivity is introduced.The Ga2O_(3)thin film is prepared through the metalorganic chemical vapor deposition technique,then used to construct the photodetector array via photolithography,lift-off,and ion beam sputtering methods.The one photodetector cell shows dark current of 1.94 p A,phototo-dark current ratio of 6×10_(7),photo responsivity of 634.15 A·W^(-1),specific detectivity of 5.93×1011cm·Hz1/2·W^(-1)(Jones),external quantum efficiency of 310000%,and linear dynamic region of 108.94 d B,indicating high performances for DUV photo detection.Furthermore,the 16-cell photodetector array displays uniform performances with decent deviation of 19.6%for photo responsivity.展开更多
This paper demonstrates the design and fabrication of three-dimensional(3 D) hexagonally ordered microbowl arrays(MBAs) decorated with Cu In S2 nanosheets for enhanced photoelectrochemical(PEC) performance. The 3 D MB...This paper demonstrates the design and fabrication of three-dimensional(3 D) hexagonally ordered microbowl arrays(MBAs) decorated with Cu In S2 nanosheets for enhanced photoelectrochemical(PEC) performance. The 3 D MBAs are fabricated by a micro-fabrication technique. The ultrathin CuInS2 nanosheets are grown on the 3 D electrodes by solvothermal transformation of Cu film. The photocurrent density of 3 D photocathode(CuInS2@MBAs) is about two times higher than that of the planar counterpart(CuInS2@Planar). The improved PEC performance can be ascribed to the elevated light trapping ability and the increased surface area for loading photocatalysts. In addition, CdS quantum dots as cocatalysts are modified onto the Cu In S2 nanosheets to further enhance the PEC activity because the formed p-n heterojunction can accelerate the separation of photogenerated carriers. As a result, the 3 D photocathode of CuInS2/CdS@MBAs shows an optimal incident photon to current efficiency of 10% at the wavelength of400 nm. It is believed that this work can be generalized to design other hierarchical 3 D photoelectrodes for improved solar water splitting.展开更多
A 10 × 10 solar-blind ultraviolet(UV) imaging array with double-layer wire structure was prepared based on Ga_(2)O_(3) film grown by atomic layer deposition. These single detection units in the array exhibit exce...A 10 × 10 solar-blind ultraviolet(UV) imaging array with double-layer wire structure was prepared based on Ga_(2)O_(3) film grown by atomic layer deposition. These single detection units in the array exhibit excellent performance at 3 V: photo-todark current ratio(PDCR) of 5.5 × 10^(5), responsivity(R) of 4.28 A/W, external quantum efficiency(EQE) of 2.1 × 10^(3)%, detectivity(D*) of 1.5 × 10^(14) Jones, and fast response time. The photodetector array shows high uniformity under different light intensity and low operating bias. The array also has good temperature stability. Under 300 ℃, it still presents clear imaging and keeps high R of 34.4 and 6.45 A/W at 5 and 1 V, respectively. This work provides a new insight for the large-scale array of Ga_(2)O_(3) solarblind UV detectors.展开更多
TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydr...TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydrothermal synthesis process. The samples are characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high-resolution transmission electron microscopy （HRTEM）, and selected-area electron diffraction （SAED）. It is found that dye-sensitized solar cells （DSSCs） assembled by the as-prepared Tit2 single-crystal NRs exhibit different trends under the condition of different nucleation and growth concentrations. Optimum cell performance is obtained with high nucleation concentration and low growth cycle concentration. The efficiency enhancement is mainly attributed to the improved specific surface area of the nanorod.展开更多
Purpose: To study the dosimetric characteristics of amorphous silicon Electronic Portal Imaging Device EPID and 2D array detector for dose verification of radiotherapy treatment plans, and the quality assurance QA tes...Purpose: To study the dosimetric characteristics of amorphous silicon Electronic Portal Imaging Device EPID and 2D array detector for dose verification of radiotherapy treatment plans, and the quality assurance QA testing of IMRT was investigated. Materials and methods: All measurements were done with Varian IX linear accelerator, aSi-1000 EPID and 2D array detector. The dose linearity, reproducibility, output factors, dose rate, SDD and response with slap phantom thickness have been measured and compared against those measured by ion chamber. Results: The characteristics of EPID and 2D array: the response of EPID agreed with 2D array and ion chamber 0.6cc. EPID and 2D array showed short-term output reproducibility with SD = 0.1%. The dose rates of 2D array SD = ±0.7%, EPID = ±0.4% compared with a 0.6 cc SD = ±0.5%. Output factor measurements for the central chamber of the EPID and 2D array showed no considerable deviation from ion chamber measurements. Measurement of beam profiles with the EPID and 2D array matched very well with the ion chamber measurements in the water phantom. The EPID is more sensitive to lower energy photons by increasing solid water phantom thickness. The mean and standard deviation passing rates (γ%≤1) for film, 2D array and EPID for 30 IMRT fields of five patients were 95.93 ± 0.96%, 99.05 ± 0.24%, and 99.37 ± 0.12%, respectively. Conclusion: The study shows that EPID and 2D array are a reliable and accurate dosimeter and a useful tool for quality assurance. We found that the EPID was more accurate compared with both 2D array and ion chamber. The gamma criterion of 3%/3 mm is the most suitable criteria for IMRT plans of QA.展开更多
Highly ordered Ag2 S/ZnS/ZnO nanorod array film photoanodes were prepared on a Ti substrate for photocathodic cathodic protection.The results indicated that the photoresponse range of the Ag2S/ZnS/ZnO composite film w...Highly ordered Ag2 S/ZnS/ZnO nanorod array film photoanodes were prepared on a Ti substrate for photocathodic cathodic protection.The results indicated that the photoresponse range of the Ag2S/ZnS/ZnO composite film was extended compared to those of the ZnO and ZnS/ZnO films,indicating its higher light absorption capacity.When the Ag2S/ZnS/ZnO composite film served as a photoanode,the film can provide the best effective photocathodic protection for 304 stainless steel in a 3.5 wt%NaCl solution under white light illumination compared to the ZnO and ZnS/ZnO films.Additionally,in comparison to pure ZnO film,the photocurrent for the ZnS/ZnO film remained the same without noticeable fluctuation after illumination for 1 h,indicating that the ZnS functionalization improved the stability by overcoming the photocorrosion effect of the ZnO photoanode under light irradiation.展开更多
To ensure the infiltration of spiro-OMeTAD into the quantum dot-sensitized photoanode and to consider the limit of the hole diffusion length in the spiro-OMeTAD layer,a rutile TiO2 nanorod array with a length of 200 n...To ensure the infiltration of spiro-OMeTAD into the quantum dot-sensitized photoanode and to consider the limit of the hole diffusion length in the spiro-OMeTAD layer,a rutile TiO2 nanorod array with a length of 200 nm,a diameter of 20 nm and an areal density of 720 ram 2 was successfully prepared using a hydrothermal method with an aqueous-grown solution of 38 mM titanium isopropoxide and 6 M hydrochloric acid at 170℃for 75 min.PbS quantum dots were deposited by a spin coating-assisted successive ionic layer adsorption and reaction(spin-SILAR),and all solid-state PbS quantum dot-sensitized TiO2 nanorod array solar cells were fabricated using spiro-OMeTAD as electrolytes.The results revealed that the average crystal size of PbS quantum dots was-78 nm using Pb(NO3)2 as the lead source and remain unchanged with the increase of the number of spin-SILAR cycles.The all solid-state PbS quantum dot-sensitized TiO2 nanorod array solar cells with spin-SILAR cycle numbers of 20,30 and 40 achieved the photoelectric conversion efficiencies of 3.74%,4.12%and 3.11%,respectively,under AM 1.5 G illumination(100 mW/cm2).展开更多
Efficiently and thoroughly degrading organic dyes in wastewater is of great importance and challenge.Herein,vertically oriented mesoporous a-Fe_(2)O_(3)nanorods array(a-Fe_(2)O_(3)-NA)is directly grown on fluorine-dop...Efficiently and thoroughly degrading organic dyes in wastewater is of great importance and challenge.Herein,vertically oriented mesoporous a-Fe_(2)O_(3)nanorods array(a-Fe_(2)O_(3)-NA)is directly grown on fluorine-doped tin oxide(FTO)glass and employed as the photoanode for photoelectrocatalytic degradation of methylene blue simulated dye wastewater.The Ovsites on the a-Fe_(2)O_(3)-NA surface are the active sites for methylene blue(MB)adsorption.Electrons transfer from the adsorbed MB to Fe-O is detected.Compared with electrocatalytic and photocatalytic degradation processes,the photoelectrocatalytic(PEC)process exhibited the best degrading performance and the largest kinetic constant.Hydroxyl,superoxide free radicals,and photo-generated holes play a jointly leading role in the PEC degradation.A possible degrading pathway is suggested by liquid chromatography-mass spectroscopy analysis.This work demonstrates that photoelectrocatalysis by a-Fe_(2)O_(3)-NA has a remarkable superiority over photocatalysis and electrocatalysis in MB degradation.The in-depth investigation of photoelectrocatalytic degradation mechanism in this study is meaningful for organic wastewater treatment.展开更多
This paper extends the Non-Circular MUltiple SIgnal Classification(MUSIC)(NC-MUSIC) method for the common array geometries including Uniform Circular Arrays(UCAs) and Uniform Rectangular Arrays(URAs),which enables the...This paper extends the Non-Circular MUltiple SIgnal Classification(MUSIC)(NC-MUSIC) method for the common array geometries including Uniform Circular Arrays(UCAs) and Uniform Rectangular Arrays(URAs),which enables the algorithm to estimate 2-D Direction Of Arrival(DOA).A comparison between UCAs and URAs of NC-MUSIC is made in this paper.The simulations show that the NC-MUSIC method doubles the maximum estimation number of standard MUSIC.Using non-circular signals,the performance of URAs is improved remarkably while the improvement of UCAs is not so significantly.Moreover,the influence of arrays structures on the NC-MUSIC method is discussed.展开更多
CdSe/CdS semiconductor quantum dots co-sensitized TiO2 nanorod array was fabricated on the transparent conductive fluorine-doped tin oxide （FTO） substrate using the hydrothermal and successive ionic layer adsorption...CdSe/CdS semiconductor quantum dots co-sensitized TiO2 nanorod array was fabricated on the transparent conductive fluorine-doped tin oxide （FTO） substrate using the hydrothermal and successive ionic layer adsorption and reaction （SILAR） process. The structural and morphological properties of the samples were characterized by X-ray diffraction （XRD）, field-emission scanning electron microscopy （FESEM）, and transmission electron microscopy （TEM）. The results indicate that CdSe/CdS QDs are uniformly coated on the surface of the TiO2 nanorods. The shift of light absorption edge was monitored by taking UV-visible absorption spectra. Compared with the absorption spectra of the TiO2 nanorod array, deposition of CdSe/CdS QDs shifts the absorption edge to the higher wavelength. The enhanced light absorption in the visible-light region of CdSe/CdS/TiO2 nanorod array indicates that CdSe/CdS layers can act as co-sensitizers in quantum dots sensitized solar cells （QDSSCs）. By optimizing the CdSe layer deposition cycles, a photocurrent of 5.78 mA/cm2, an open circuit photovoltage of 0.469 V and a conversion efficiency of 1.34 % were obtained under an illumination of 100 mw/cm2.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51972095).
文摘The development of bifunctional electrocatalysts for hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)at high current density under industrial temperatures is crucial for large-scale industrial hydrogen production from water splitting.In this work,M-MnO_(2)@TNTA composite electrodes were prepared by depositing various metal ion-doped manganese oxide nanoparticles on the titania nanotube array(TNTA)by successive ionic layer adsorption reaction(SILAR)method,and their HER and OER electrocatalytic performances were investigated in 1 M KOH.Results show that the CoFe-MnO_(2)@TNTA composite electrode prepared by simultaneous doping of Co^(3+)and Fe^(3+)in MnO_(2) exhibits optimal catalytic performance.Compared with MnO_(2)@TNTA without ion doping,the overpotentials of CoFe-MnO_(2)@TNTA at 10 mA cm^(-2)(η_(10))for HER and OER are reduced by 571 and 665 mV.In addition,the electrode perfor-mance can be significantly enhanced by increasing the test temperature,and the porous array structure enables CoFe-MnO_(2)@TNTA to exhibit better performance at high current densities.At 50℃,which is the common industrial electrolytic water temperature,the η_(10) of CoFe-MnO_(2)@TNTA for HER is almost equal to that of the Pt/C electrode.The η_(100) of CoFe-MnO_(2)@TNTA for HER is reduced by 35 mV compared with the Pt/C electrode.Moreover,η_(200) of CoFe-MnO_(2)@TNTA for OER is significantly lowered by 111 and 184 mV compared with IrO_(2) and RuO_(2) electrodes.Utilizing CoFe-MnO_(2)@TNTA as both the cathode and anode for overall water splitting,the electrolysis voltage is merely 2.33 V under the current density of 200 mA cm^(-2),much lower than that of IrO_(2)(+)||Pt/C(-)(2.68 V).The present work may provide a valuable reference for the development of self-supporting bifunctional electrodes suitable for high-current-density water splitting at industrial temperatures.
基金supported by the National Natural Science Foundation of China(21507104)Natural Science Basic Research Plan in Shaanxi Province of China(2017JM2015)~~
文摘A PbO2/Sb-SnO2/TiO2 nanotube array composite electrode was successfully synthesized and its electrochemical oxidation properties were investigated.Field-emission scanning electron microscopy(FE-SEM)and X-ray diffraction(XRD)results showed that the PbO2 coating was composed of anα-PbO2 inner layer and aβ-PbO2 outer layer.Accelerated life measurement indicated that the composite electrode had a lifetime of 815 h.Rhodamine B(RhB)was employed as a model pollutant to analyze the electrocatalytic activity of the electrode.The effects of initial RhB concentration,current density,initial pH,temperature,and chloride ion concentration on the electrochemical oxidation were investigated in detail.Inductively coupled plasma atomic emission spectroscopy(ICP-AES)results suggested that the concentration of leached Pb^2+in the electrolyte during the electrocatalytic oxidation process can be neglected.Finally,the degradation mechanism during the electrocatalytic oxidation process was proposed based on the results of solid-phase micro-extraction-gas chromatography-mass spectrometry(SPME-GC-MS).The high electrocatalytic performance of the composite electrode makes it a promising anode for the treatment of organic pollutants in aqueous solution.
基金supported by the Natural Science Foundation of Hunan Province (grant no. 2018JJ2485)Hunan Provincial Science and Technology Plan Project (grant nos. 2018RS3008 and 2017TP1001)+1 种基金the National Natural Science Foundation of China (grant no. 21872174)Innovation-Driven Project of Central South University (grant nos. 2016CXS031 and 2017CX003)
文摘Direct electrochemical reduction of CO2 to multicarbon products is highly desirable, yet challenging. Here, we present a potentiostatic pulse-electrodeposition of high-aspect-ratio CuxAuy nanowire arrays (NWAs) as high-performance electrocatalysts for the CO2 reduction reaction (CO2RR). The surface electronic structure related to the Cu:Au ratio in the CuxAuy NWAs could be facilely modulated by controlling the electrodeposition potential and the as-fabricated CuxAuy NWAs could be directly used as the catalytic electrode for the CO2RR. The morphology of the high-aspect-ratio nanowire array significantly lowers the onset potential of the alcohol formation due to the diffusion-induced enhancement of the local pH and CO concentration near the nanowire surface. Besides, the properly adjusted surface electronic structure of the CuxAuy NWA enables the adsorption of CO and facilitates the subsequent CO reduction to ethanol via the C-C coupling pathway. Owing to the synergistic effect of morphology and electronic structure, the optimized CuxAuy NWA selectively reduces CO2 to ethanol at low potentials of -0.5——0.7 V vs. RHE with a highest Faradaic efficiency of 48%. This work demonstrates the feasibility to optimize the activity and selectivity of the Cu-based electrocatalysts toward multicarbon alcohols for the CO2RR via simultaneous adjustment of the electronic structure and morphology of the catalysts.
基金supported by the National Natural Science Foundation of China (No.61774073)Open Project of State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University (No. 2016-25)Science and Technology Development Program of Jilin province (No. 20170101086JC)
文摘TiO2 nanotube arrays were prepared by means of an electrochemical anodization technique in an organic electrolyte solution doped with polyvinyl pyrrolidone (PVP) and were subsequently modified with phosphomolybdic acid (PMoA) to obtain PMoA/TiO2 nanotube arrays. The microstructure and photochromic properties were investigated via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), and X-ray photoelectron spectroscopy (XPS). The results indicated that the Keggin structure of PMoA and the nanotube structure of TiO2 were not destroyed, and there was a strong degree of interaction between PMoA and TiO2 at the biphasic interface with lattice interlacing during the compositing process. The XPS results further indicated that there was a change in the chemical microenvironment during the formation process of the composite, and a new charge transfer bridge was formed through the Mo-O-Ti bond. Under visible light irradiation, the colorless PMoA/TiO2 nanotube array quickly turned blue and exhibited a photochromic response together with reversible photochromism in the presence of H2O2. After visible light irradiation for 60s, the appearance of Mo^5+ species in the XPS spectra indicated a photoreduction process in accordance with a photoinduced electron transfer mechanism.
基金the State Key Development Program for Basic Research of China (Grant No.2009CB220004)the Shanghai Basic Research Key Project (08JC1411300,0952nm01800)+1 种基金the National High Technology Research and Development Program of China (Grant No.2009 AA063003)Shanghai Tongji Gao Tingyao Environmental Science and Technology Development Foundation for financial support
文摘Copper and titanium remain relatively plentiful in earth crust.Therefore,using them in solar energy conversion technologies are of significant interest.In this work,cuprous oxide（Cu2O）-modified short TiO2 nanotube array electrode was prepared based on the following two design ideas:first,the short titania nanotubes obtained from sonoelectrochemical anodization possess excellent charge separation and transportation properties as well as desirable mechanical stability;second,the sonoelectrochemical deposition technique favours the improvement in the combination between Cu2O and TiO2 nanotubes,and favours the dispersion of Cu2O particles.UV-Vis absorption and photo-electronchemical measurements proved that the Cu2O coating extended the visible spectrum absorption and the solar spectrum-induced photocurrent response.Under AM1.5 irradiation,the photocurrent density of the composite electrode（i.e.sonoelectrochemical deposition for 5 min） was more than 4.75 times as high as the pure nanotube electrode.Comparing the photoactivity of the Cu2O/TiO2 electrode obtained using sonoelectrochemical deposition with others that synthesized using plain electrochemical deposition,the photocurrent density of the former electrode was 2.2 times higher than that of the latter when biased at 1.0 V（vs.Ag/AgCl）.The reproducible photocurrent response under intermittent illumination demonstrated the excellent stability of the composite electrode.Such kind of composite electrode material will have many potential applications in solar cell and other fields.
文摘Neuronal connections can be detected by neuronal network discharges in hippocampal neurons cultured on multi-electrodes.However,the multi-electrode-array（MEA）has not been widely used in hippocampal slice culture studies focused on epilepsy.The present study induced spontaneous synchronous epileptiform activity using low Mg2＋artificial cerebrospinal fluid on acute hippocampal slices to record hippocampal discharges with MEA.Results showed that burst duration and average number of spikes in a burst were significantly greater in the CA3 compared with dentate gyrus and CA1 areas.In Schaffer cut-off group,CA1 area discharges disappeared,but synchronous discharges remained in the CA3 area.Moreover,synchronous discharge frequency in the Schaffer cut-off group was similar to control.However,burst duration and average number of spikes in a burst were significantly decreased compared with control（P 〈 0.05）.Results demonstrated that highest neuronal excitability occurred in the CA3 area,and synchronous discharges induced by low Mg2＋originated from the CA3 region.
基金This work was supported by the National Research Foundation,Singapore under Award No.NRF-CRP24-2020-0002.
文摘The conventional computing architecture faces substantial chal-lenges,including high latency and energy consumption between memory and processing units.In response,in-memory computing has emerged as a promising alternative architecture,enabling computing operations within memory arrays to overcome these limitations.Memristive devices have gained significant attention as key components for in-memory computing due to their high-density arrays,rapid response times,and ability to emulate biological synapses.Among these devices,two-dimensional(2D)material-based memristor and memtransistor arrays have emerged as particularly promising candidates for next-generation in-memory computing,thanks to their exceptional performance driven by the unique properties of 2D materials,such as layered structures,mechanical flexibility,and the capability to form heterojunctions.This review delves into the state-of-the-art research on 2D material-based memristive arrays,encompassing critical aspects such as material selection,device perfor-mance metrics,array structures,and potential applications.Furthermore,it provides a comprehensive overview of the current challenges and limitations associated with these arrays,along with potential solutions.The primary objective of this review is to serve as a significant milestone in realizing next-generation in-memory computing utilizing 2D materials and bridge the gap from single-device characterization to array-level and system-level implementations of neuromorphic computing,leveraging the potential of 2D material-based memristive devices.
基金the financial support by the National Natural Science Foundation of China(NSFC) Grants(51702295)。
文摘Rational coupling of hydrogen evolution reaction(HER) and oxygen evolution reaction(OER) catalysts is extremely important for practical overall water splitting,but it is still challenging to construct such bifunctional heterostructures.Herein,we present a metal-organic framework(MOF)-etching strategy to design free-standing and hierarchical hollow CoS_(2)-MoS_(2) heteronanosheet arrays for both HER and OER.Resulting from the controllable etching of MOF by MoO_(4)^(2-) and in-situ sulfuration,the obtained CoS_(2)-MoS_(2) possesses abundant heterointerfaces with modulated local charge distribution,which promote water dissociation and rapid electrocatalytic kinetics.Moreover,the two-dimensional hollow array architecture can not only afford rich surface-active sites,but also facilitate the penetration of electrolytes and the release of evolved H_(2)/O_(2) bubbles.Consequently,the engineered CoS_(2)-MoS_(2) heterostructure exhibits small overpotentials of 82 mV for HER and 266 mV for OER at 10 mA cm^(-2).The corresponding alkaline electrolyzer affords a cell voltage of 1.56 V at 10 mA cm^(-2) to boost overall water splitting,along with robust durability over 24 h, even surpassing the benchmark electrode couple composed of IrO_(2) and Pt/C The present work may provide valuable insights for developing MOF-derived heterogeneous electrocatalysts with tailored interface/surface structure for widespread application in catalysis and other energyrelated areas.
基金supported by the National Natural Science Foundation of China (Grant No.:51503062, 51402100, 21573063 and 21573066)the Youth 1000 Talent Program of China+1 种基金the Fundamental Research Funds for the Central UniversitiesInter-discipline Research Program of Hunan University
文摘Developing non-expensive, highly active and highly stable electrocatalysts for hydrogen evolution has aroused extensive attention, owing to the necessity of novel clean and sustainable energy carriers. In this paper, we report a synthesis of free-standing three-dimensional hierarchical MoS_2/CoS_2 heterostructure arrays through a convenient process. The investigation of electrocatalytic HER performance suggests that the MoS_2/CoS_2 hybrid catalyst exhibits significant enhancement in HER(onsetpotential and potential at a current density of 100 mA cm^(-2) are 20 mV and125 mV, respectively) and superior durability(no shift of current density is observed after a continuous scanning of 3000 times) compared with individual CoS_2 and MoS_2. The superior HER performance was attributed to the formation of the interface between CoS_2 and MoS_2 through the electrochemical characterization, Raman, XPS analysis, and the control experiment. The lower onsetpotential, higher current density, excellent durability, and the free-standing structure of the three-dimensional hierarchical MoS_2/CoS_2 heterostructure array make it a promising cathode catalyst suitable for widespread application.
基金financially supported by the National Natural Science Foundation of China(Nos.51974222 and 51974191)the Natural Science Basic Research Plan in Shaanxi Province(No.2019JQ-764)the Project from Shaanxi Provincial Education Department,China(No.18JK0474)。
文摘Three-dimensional(3D) thin-film electrodes are promising solution to the volume change of active materials in lithium-ion batteries.As a conductive current collector,the 3D TiO_(2) nanotube array networks(TNAs) have a one-dimensional stable electronic conductive path and increase the adhesion between the current collector and raw material,thereby improving the cycle stability of active materials.In this study,a novel 3D-TNAs@Sb_(2)S_(3) anode was fabricated by directly depositing natural stibnite onto3D TNAs.The adhesion of Sb_(2)S_(3) particles to the substrate was enhanced due to the large surface area provided by 3D-TNAs.Moreover,the porous layered structure composed of Sb_(2)S_(3) nanoparticles relieved the stress generated during lithiation and adapted to the volume change of Sb_(2)S_(3) during cycling.Therefore,the resulting composite anode exhibits high cycle and rate performance,reaching0.36 mAh·cm^(-2) after 80 cycles at the galvanostatic rate of1 mA·cm^(-2),with high coulombic efficiency of 98%.
基金Project supported by the National Natural Science Foundation of China(Grant No.61774019)Natural Science Research Start-up Foundation of Recruiting Talents of Nanjing University of Posts and Telecommunications(Grant Nos.XK1060921115 and XK1060921002)。
文摘A 4×4 beta-phase gallium oxide(β-Ga_(2)O_(3))deep-ultraviolet(DUV)rectangular 10-fingers interdigital metalsemiconductor-metal(MSM)photodetector array of high photo responsivity is introduced.The Ga2O_(3)thin film is prepared through the metalorganic chemical vapor deposition technique,then used to construct the photodetector array via photolithography,lift-off,and ion beam sputtering methods.The one photodetector cell shows dark current of 1.94 p A,phototo-dark current ratio of 6×10_(7),photo responsivity of 634.15 A·W^(-1),specific detectivity of 5.93×1011cm·Hz1/2·W^(-1)(Jones),external quantum efficiency of 310000%,and linear dynamic region of 108.94 d B,indicating high performances for DUV photo detection.Furthermore,the 16-cell photodetector array displays uniform performances with decent deviation of 19.6%for photo responsivity.
基金sponsored by the National Key Research and Development Program of China (2016YFA0200800)National Natural Science Foundation of China (61804156)Shanghai Sailing Program (18YF1427800)。
文摘This paper demonstrates the design and fabrication of three-dimensional(3 D) hexagonally ordered microbowl arrays(MBAs) decorated with Cu In S2 nanosheets for enhanced photoelectrochemical(PEC) performance. The 3 D MBAs are fabricated by a micro-fabrication technique. The ultrathin CuInS2 nanosheets are grown on the 3 D electrodes by solvothermal transformation of Cu film. The photocurrent density of 3 D photocathode(CuInS2@MBAs) is about two times higher than that of the planar counterpart(CuInS2@Planar). The improved PEC performance can be ascribed to the elevated light trapping ability and the increased surface area for loading photocatalysts. In addition, CdS quantum dots as cocatalysts are modified onto the Cu In S2 nanosheets to further enhance the PEC activity because the formed p-n heterojunction can accelerate the separation of photogenerated carriers. As a result, the 3 D photocathode of CuInS2/CdS@MBAs shows an optimal incident photon to current efficiency of 10% at the wavelength of400 nm. It is believed that this work can be generalized to design other hierarchical 3 D photoelectrodes for improved solar water splitting.
基金supported by Natural Science Basic Research Program of Shaanxi Province of China (No. 2023-JCYB-574)National Natural Science Foundation of China (Grant No. 62304178)。
文摘A 10 × 10 solar-blind ultraviolet(UV) imaging array with double-layer wire structure was prepared based on Ga_(2)O_(3) film grown by atomic layer deposition. These single detection units in the array exhibit excellent performance at 3 V: photo-todark current ratio(PDCR) of 5.5 × 10^(5), responsivity(R) of 4.28 A/W, external quantum efficiency(EQE) of 2.1 × 10^(3)%, detectivity(D*) of 1.5 × 10^(14) Jones, and fast response time. The photodetector array shows high uniformity under different light intensity and low operating bias. The array also has good temperature stability. Under 300 ℃, it still presents clear imaging and keeps high R of 34.4 and 6.45 A/W at 5 and 1 V, respectively. This work provides a new insight for the large-scale array of Ga_(2)O_(3) solarblind UV detectors.
基金Project supported by the Fundamental Research Funds for the Central Universities,China(Grant No.2013XK07)
文摘TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydrothermal synthesis process. The samples are characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high-resolution transmission electron microscopy （HRTEM）, and selected-area electron diffraction （SAED）. It is found that dye-sensitized solar cells （DSSCs） assembled by the as-prepared Tit2 single-crystal NRs exhibit different trends under the condition of different nucleation and growth concentrations. Optimum cell performance is obtained with high nucleation concentration and low growth cycle concentration. The efficiency enhancement is mainly attributed to the improved specific surface area of the nanorod.
文摘Purpose: To study the dosimetric characteristics of amorphous silicon Electronic Portal Imaging Device EPID and 2D array detector for dose verification of radiotherapy treatment plans, and the quality assurance QA testing of IMRT was investigated. Materials and methods: All measurements were done with Varian IX linear accelerator, aSi-1000 EPID and 2D array detector. The dose linearity, reproducibility, output factors, dose rate, SDD and response with slap phantom thickness have been measured and compared against those measured by ion chamber. Results: The characteristics of EPID and 2D array: the response of EPID agreed with 2D array and ion chamber 0.6cc. EPID and 2D array showed short-term output reproducibility with SD = 0.1%. The dose rates of 2D array SD = ±0.7%, EPID = ±0.4% compared with a 0.6 cc SD = ±0.5%. Output factor measurements for the central chamber of the EPID and 2D array showed no considerable deviation from ion chamber measurements. Measurement of beam profiles with the EPID and 2D array matched very well with the ion chamber measurements in the water phantom. The EPID is more sensitive to lower energy photons by increasing solid water phantom thickness. The mean and standard deviation passing rates (γ%≤1) for film, 2D array and EPID for 30 IMRT fields of five patients were 95.93 ± 0.96%, 99.05 ± 0.24%, and 99.37 ± 0.12%, respectively. Conclusion: The study shows that EPID and 2D array are a reliable and accurate dosimeter and a useful tool for quality assurance. We found that the EPID was more accurate compared with both 2D array and ion chamber. The gamma criterion of 3%/3 mm is the most suitable criteria for IMRT plans of QA.
基金This work was supported financially by the Funding from the Taishan Scholarship of Climbing Plan(No.tspd20161006)the National Natural Science Foundation of China(No.51772176)the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents(No.2017RCJJ018).
文摘Highly ordered Ag2 S/ZnS/ZnO nanorod array film photoanodes were prepared on a Ti substrate for photocathodic cathodic protection.The results indicated that the photoresponse range of the Ag2S/ZnS/ZnO composite film was extended compared to those of the ZnO and ZnS/ZnO films,indicating its higher light absorption capacity.When the Ag2S/ZnS/ZnO composite film served as a photoanode,the film can provide the best effective photocathodic protection for 304 stainless steel in a 3.5 wt%NaCl solution under white light illumination compared to the ZnO and ZnS/ZnO films.Additionally,in comparison to pure ZnO film,the photocurrent for the ZnS/ZnO film remained the same without noticeable fluctuation after illumination for 1 h,indicating that the ZnS functionalization improved the stability by overcoming the photocorrosion effect of the ZnO photoanode under light irradiation.
基金supported by the National Natural Science Foundation of China(51272061,51472071)
文摘To ensure the infiltration of spiro-OMeTAD into the quantum dot-sensitized photoanode and to consider the limit of the hole diffusion length in the spiro-OMeTAD layer,a rutile TiO2 nanorod array with a length of 200 nm,a diameter of 20 nm and an areal density of 720 ram 2 was successfully prepared using a hydrothermal method with an aqueous-grown solution of 38 mM titanium isopropoxide and 6 M hydrochloric acid at 170℃for 75 min.PbS quantum dots were deposited by a spin coating-assisted successive ionic layer adsorption and reaction(spin-SILAR),and all solid-state PbS quantum dot-sensitized TiO2 nanorod array solar cells were fabricated using spiro-OMeTAD as electrolytes.The results revealed that the average crystal size of PbS quantum dots was-78 nm using Pb(NO3)2 as the lead source and remain unchanged with the increase of the number of spin-SILAR cycles.The all solid-state PbS quantum dot-sensitized TiO2 nanorod array solar cells with spin-SILAR cycle numbers of 20,30 and 40 achieved the photoelectric conversion efficiencies of 3.74%,4.12%and 3.11%,respectively,under AM 1.5 G illumination(100 mW/cm2).
基金financially supported by the National Natural Science Foundation of China (22005097)the State Key Laboratory of Physical Chemistry of Solid Surfaces,Xiamen University,Xiamen 361005,P.R.China (201815)。
文摘Efficiently and thoroughly degrading organic dyes in wastewater is of great importance and challenge.Herein,vertically oriented mesoporous a-Fe_(2)O_(3)nanorods array(a-Fe_(2)O_(3)-NA)is directly grown on fluorine-doped tin oxide(FTO)glass and employed as the photoanode for photoelectrocatalytic degradation of methylene blue simulated dye wastewater.The Ovsites on the a-Fe_(2)O_(3)-NA surface are the active sites for methylene blue(MB)adsorption.Electrons transfer from the adsorbed MB to Fe-O is detected.Compared with electrocatalytic and photocatalytic degradation processes,the photoelectrocatalytic(PEC)process exhibited the best degrading performance and the largest kinetic constant.Hydroxyl,superoxide free radicals,and photo-generated holes play a jointly leading role in the PEC degradation.A possible degrading pathway is suggested by liquid chromatography-mass spectroscopy analysis.This work demonstrates that photoelectrocatalysis by a-Fe_(2)O_(3)-NA has a remarkable superiority over photocatalysis and electrocatalysis in MB degradation.The in-depth investigation of photoelectrocatalytic degradation mechanism in this study is meaningful for organic wastewater treatment.
文摘This paper extends the Non-Circular MUltiple SIgnal Classification(MUSIC)(NC-MUSIC) method for the common array geometries including Uniform Circular Arrays(UCAs) and Uniform Rectangular Arrays(URAs),which enables the algorithm to estimate 2-D Direction Of Arrival(DOA).A comparison between UCAs and URAs of NC-MUSIC is made in this paper.The simulations show that the NC-MUSIC method doubles the maximum estimation number of standard MUSIC.Using non-circular signals,the performance of URAs is improved remarkably while the improvement of UCAs is not so significantly.Moreover,the influence of arrays structures on the NC-MUSIC method is discussed.
基金National Natural Science Foundation of China(No.11174071)the International Cooperation Project of Wuhan City and Hubei Province(Nos.201070934339 and 2010BFA010)
文摘CdSe/CdS semiconductor quantum dots co-sensitized TiO2 nanorod array was fabricated on the transparent conductive fluorine-doped tin oxide （FTO） substrate using the hydrothermal and successive ionic layer adsorption and reaction （SILAR） process. The structural and morphological properties of the samples were characterized by X-ray diffraction （XRD）, field-emission scanning electron microscopy （FESEM）, and transmission electron microscopy （TEM）. The results indicate that CdSe/CdS QDs are uniformly coated on the surface of the TiO2 nanorods. The shift of light absorption edge was monitored by taking UV-visible absorption spectra. Compared with the absorption spectra of the TiO2 nanorod array, deposition of CdSe/CdS QDs shifts the absorption edge to the higher wavelength. The enhanced light absorption in the visible-light region of CdSe/CdS/TiO2 nanorod array indicates that CdSe/CdS layers can act as co-sensitizers in quantum dots sensitized solar cells （QDSSCs）. By optimizing the CdSe layer deposition cycles, a photocurrent of 5.78 mA/cm2, an open circuit photovoltage of 0.469 V and a conversion efficiency of 1.34 % were obtained under an illumination of 100 mw/cm2.
