The metallic antenna design problem can be treated as a problem to find the optimal distribution of conductive material in a certain domain. Although this problem is well suited for topology optimization method, the v...The metallic antenna design problem can be treated as a problem to find the optimal distribution of conductive material in a certain domain. Although this problem is well suited for topology optimization method, the volumetric distribution of conductive material based on 3D finite element method (FEM) has been known to cause numerical bottlenecks such as the skin depth issue, meshed 'air regions' and other numerical problems. In this paper a topology optimization method based on the method of moments (MoM) for configuration design of planar metallic antenna was proposed. The candidate structure of the planar metallic antenna was approximately considered as a resistance sheet with position-dependent impedance. In this way, the electromagnetic property of the antenna can be analyzed easily by using the MoM to solve the radiation problem of the resistance sheet in a finite domain. The topology of the antenna was depicted with the distribution of the impedance related to the design parameters or relative densities. The conductive material (metal) was assumed to have zero impedance, whereas the non-conductive material was simulated as a material with a finite but large enough impedance. The interpolation function of the impedance between conductive material and non-conductive material was taken as a tangential function. The design of planar metallic antenna was optimized for maximizing the efficiency at the target frequency. The results illustrated the effectiveness of the method.展开更多
In this paper, based on a tangential interpolation function and an adaptively increasing penalty-factor strategy(TIPS), a novel parameterization method with a self-penalization scheme aimed for the topology optimizati...In this paper, based on a tangential interpolation function and an adaptively increasing penalty-factor strategy(TIPS), a novel parameterization method with a self-penalization scheme aimed for the topology optimization of metallic antenna design is proposed. The topology description is based on the material distribution approach.The proposed tangential interpolation function aims to associate the material resistance with design variables, in which the material resistance is expressed in the arctangent scale and the arctangent resistance is interpolated with the design variables using the rational approximation of material properties. During the optimization process, a strategy with an adaptively increasing penalty factor is used to eliminate the remaining gray scale elements, as illustrated in examples,in the topology optimization based on the proposed tangential interpolation function. Design results of typical examples express the effectiveness of the proposed TIPS parameterization.展开更多
In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to...In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to improve antenna loading with low heating efficiency to avoid arching on transmission line. To design a new ion cyclotron range of frequencies （ICRF） antenna in LHD, calculation for a simple antenna model is conducted using three-dimensional electrical magnetic code （high frequency structure simulator, HFSS） for an water loading as an imaginary plasma with low heating efficiency. At resonant frequencies, antenna loading is sensitive to strap width, and resonant frequencies are strongly related to strap height. There is no differences of RF current profile on the strap surface between resonant frequency and non-resonant frequency. The strap should be perpendicularly placed against the magnetic field line, since Faraday-shield angle will lead to a decrease in the effective antenna height.展开更多
An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to ope...An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to operate in a frequency range of 30 MHz to 80 MHz and hence the antenna geometry is optimized for 55 MHz. The design is based on the conventional strap antenna element. The coupling properties of the antenna are calculated with a slab model of the plasma for the antenna simulation. The coupling code is extended for the analysis of the toroidal antenna array separated by septa.展开更多
In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically revi...In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically reviewed.In this context,general-ized odd-even mode theory is advanced to quantitatively and approximately describe the mutual coupling effect between a feed line and an antenna.As is mathematically deduced and demonstrated,the modal parity mismatch between the feed line and the antenna should ultimately dominate the unbalance phenomenon in antenna systems.Thus,an elegant,closed-form formula is derived to ap-proximately calculate the“unbalance degree”of a straight dipole off-center fed by a symmetric twin-wire line.Design approaches for the simplest,linear,1-D multimode resonant antennas are introduced.Moreover,the“falling tone excitation”law gauged based on prototype dipoles is revealed and used to develop a mode synthesis design approach for microstrip patch antennas(MPAs)and 2-D sectorial electric dipole antennas.Design examples with distinctive radiation performance are presented and discussed.Finally,possible development trends of multimode resonant antennas are prospected.展开更多
In satellite laser communication technology, which is built between planets and between a planet and the Earth, the optical antenna is the key point. Thus, research on optical system design is important. The off-axis ...In satellite laser communication technology, which is built between planets and between a planet and the Earth, the optical antenna is the key point. Thus, research on optical system design is important. The off-axis reflective system has no obscuration and hence possesses a high efficiency for energy transfer. This study proposes a novel method for designing a free-form off-axis reflective imaging system. This study also introduces differential equations that depend on Fermat＇s principle and sine condition. Finally, a free-form off-axis two-mirror optical system was designed by using the differential equation method. This system includes one intermediate image plane, in which the field of view （FOV） is -5° to -4° in the y-axis and -1° to 0° in the x-axis. The modulation transfer function was greater than 0.7 at 50 lp/mm, and the efficiency of energy transmission was high. The free-form off-axis two-mirror optical system involves a wide range of application prospects in the optical antenna used in the satellite laser communication systems. Moreover, the design method that used differ- ential equations was proven simple and effective.展开更多
While many techniques have been developed for the design of different types of antennas,such as wire antenna,patch antenna,lenses,and reflectors,these cannot be said general-purpose strategies for the synthesis and de...While many techniques have been developed for the design of different types of antennas,such as wire antenna,patch antenna,lenses,and reflectors,these cannot be said general-purpose strategies for the synthesis and design of antennas to achieve the performance characteristics specified by users.Recently,there has been an increasing need for the development of antenna design techniques because of the advent of 5 G and a variety of space,defense,biological,and similar applications,for which a robust and general-purpose design tool is not to be developed.The main objective of this study is to take a look at antenna design from the field manipulation point of view,which has the potential to partially fulfill this need.We review the existing field manipulation techniques,including field transformation methods based on Maxwell’s and wave equations,point out some limitations of these techniques,and then present ways to improve the performance of these methods.Next,we introduce an alternative approach for field manipulation based on two-dimensional(2 D)metasurfaces,and present laws of the generalized reflection and refraction that are based on 2 D surface electromagnetics.Then,we explore how to overcome the limitations of conventional reflection and refraction processes that are strictly bounded by the critical angle.Finally,we provide some application examples of field manipulation methods in the antenna design,with a view on developing a general-purpose strategy for antenna design for future communication.展开更多
Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3 RR-3 RRR deployable unit cannot be fully folded,...Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3 RR-3 RRR deployable unit cannot be fully folded, this study proposes a 3 UU-3 URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3 UU-3 URU unit is analyzed. Then, the 3 UU-3 URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3 UU-3 URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3 UU-3 URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.展开更多
To overcome the mutual coupling (MC) of multiple antennas in millimeter wave (mmWave) communication systems, a novel beam design method with low complexity is proposed in this paper. Firstly, an equivalent channel mod...To overcome the mutual coupling (MC) of multiple antennas in millimeter wave (mmWave) communication systems, a novel beam design method with low complexity is proposed in this paper. Firstly, an equivalent channel model incorporating the effect of MC is analyzed and established, and then an optimal precoding / combiner vector for beamforming is derived. On this basis, by using greedy geometric (GG) algorithm, a novel hybrid beam design method is proposed. Finally, the performance of proposed method is analyzed and compared with other traditional ones. The simulation results show that the proposed method has better suppression of the MC effect as well as lower complexity.展开更多
The filter and antenna are two key components of the radio frequency(RF)front-end.When the antenna is directly connected with the filter,additional mismatch losses will be caused.Therefore,the antenna and filter are i...The filter and antenna are two key components of the radio frequency(RF)front-end.When the antenna is directly connected with the filter,additional mismatch losses will be caused.Therefore,the antenna and filter are integrated into a single device to provide both filtering and radiating functions.In this way,many advantages,like low cost,light weight,small size and lower insertion loss can be obtained.In this paper,the co-design approaches of RF filter-antenna are reviewed.Based on the open literatures,the integrated approaches of filtering antenna can be classified into five main categories:1)Co-design by optimizing the interfacing impedance,2)co-design according to the synthesis approach of filter,3)co-design by embedding novel resonators within the feeding structures,4)co-design by employing auxiliary physical structures,and 5)other methods.The RF filter-antenna system can improve the integration degree of RF frontend,reduce its size and cost,and optimize its performance.展开更多
The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz;acceptable in 915 MHz as well. T...The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz;acceptable in 915 MHz as well. The s-shape is selected due to the need of reducing the overall size of the normal monopole antenna. The printed antenna was designed with an approximate overall size of 39 × 56 mm2 of which the antenna’s upper side is 26 × 39 mm2 while its reference ground board was sized at 39 × 30 mm2. The antenna is fed by a strip line of 3 × 1.5 mm2, in series with a 4.4 pF capacitance and shunt with an 8.7 nH inductance for purpose of antenna’s impedance matching with the input. A couple of existing publications showed that PCB antenna is not a new technology;however not an old technology for telecommunication industry. The raised problem by this work was duly solved with HFSS as a tool;excellent results are presented. After duly matching the antenna’s impedance with 50 Ω microstrip feed-line, solutions for overall performance were analyzed and demonstrated optimal: radiation patterns were proven omnidirectional, antenna gain optimized. The present antenna prototype’s overall dimensions can be readjusted according to any industrial and manufacturing requests.展开更多
A six-element Yagi-Uda array is optimally designed using Central Force Optimization (CFO) with a small amount of pseudo randomly injected negative gravity. CFO is a simple, deterministic metaheuristic analogizing grav...A six-element Yagi-Uda array is optimally designed using Central Force Optimization (CFO) with a small amount of pseudo randomly injected negative gravity. CFO is a simple, deterministic metaheuristic analogizing gravitational kinematics (motion of masses under the influence of gravity). It has been very effective in addressing a wide range of antenna and other problems and normally employs only positive gravity. With positive gravity the six element CFO-designed Yagi array described here exhibits excellent performance with respect to the objectives of impedance bandwidth and forward gain. This paper addresses the question of what happens when a small amount of negative gravity is injected into the CFO algorithm. Does doing so have any effect, beneficial, negative or neutral? In this particular case negative gravity improves CFO’s exploration and creates a region of optimality containing many designs that perform about as well as or better than the array discovered with only positive gravity. Without some negative gravity these array configurations are overlooked. This Yagi-Uda array design example suggests that antennas optimized or designed using deterministic CFO may well benefit by including a small amount of negative gravity, and that the negative gravity approach merits further study.展开更多
A compact,reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work.It was achieved by designi...A compact,reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work.It was achieved by designing a Th-Shaped frequency reconfigurable multi-band microstrip planar antenna,based on use of a single switch within the radiating structure of the antenna.Three frequency bands(i.e.,2007–2501 MHz,3660–3983MHz and 9341–1046 MHz)can be operated with the switch in the ON switch state.In the OFF state of the switch,the antenna operates within the 2577–3280MHz and 9379–1033MHz Bands.The proposed antenna shows an acceptable input impedance match with Voltage Standing Wave Ratio(VSWR)less than 1.2.The peak radiation efficiency of the antenna is 82%.A reasonable gain is obtained from 1.22 to 3.31 dB within the operating bands is achieved.The proposed antenna supports UniversalMobile Telecommunication System(UMTS)-1920 to 2170 MHz,Worldwide Interoperability and Microwave Access(WiMAX)/Wireless Broadband/(Long Term Evolution)LTE2500–2500 to 2690 MHz,Fifth Generation(5G)-2500/3500 MHz,Wireless Fidelity(Wi-Fi)/Bluetooth-2400 to 2480 MHz,and Satellite communication applications in X-Band-8000 to 12000 MHz.The overall planar dimension of the proposed antenna is 40×20mm2.The antennawas designed,along with the parametric study,using Electromagnetic(EM)simulation tool.The antenna prototype is fabricated for experimental validation with the simulated results.The proposed antenna is low profile,tunable,lightweight,cheap to fabricate and highly efficient and hence is deemed suitable for use in modern wireless communication electronic devices.展开更多
In the process of radar data acquisition,limited amount of information can be provided to post-processing interpretation by the data acquisition method of single-input and single-output,however,the location and physic...In the process of radar data acquisition,limited amount of information can be provided to post-processing interpretation by the data acquisition method of single-input and single-output,however,the location and physical parameter information of geological body can be obtained more accurately by using Multi-Input Multi-Output(MIMO)antenna with multiple transmitters and multiple receivers.Especially when collecting borehole radar data and the aperture is very narrow,but the antenna is required to be able to ensure better results in a larger frequency band,therefore,the size of the antenna will be greatly challenged.Meanwhile,the close arrangement of multiple transmitting and receiving antennas will inevitably affect the signal radiation.Based on the borehole radar,this paper simulates and optimizes the Single-Input Multi-Output antenna(SIMO antenna),the size of which meets the aperture requirements,using HFSS antenna simulation software,and explores the factors affecting the antenna return loss and isolation.Among them,the radius of the dipole has little effect on the return loss and isolation,whereas increasing the number of receiving antennas or increasing the transceiver distance will significantly affect the antenna coupling,with a significant reduction in the amplitude of isolation.展开更多
基金supported by the National Natural Science Foundation of China (Grants 11332004, 11372063, and 11572073)111 Project (Grant B14013)the Fundamental Research Funds for the Central Universities (Grant DUT15ZD101)
文摘The metallic antenna design problem can be treated as a problem to find the optimal distribution of conductive material in a certain domain. Although this problem is well suited for topology optimization method, the volumetric distribution of conductive material based on 3D finite element method (FEM) has been known to cause numerical bottlenecks such as the skin depth issue, meshed 'air regions' and other numerical problems. In this paper a topology optimization method based on the method of moments (MoM) for configuration design of planar metallic antenna was proposed. The candidate structure of the planar metallic antenna was approximately considered as a resistance sheet with position-dependent impedance. In this way, the electromagnetic property of the antenna can be analyzed easily by using the MoM to solve the radiation problem of the resistance sheet in a finite domain. The topology of the antenna was depicted with the distribution of the impedance related to the design parameters or relative densities. The conductive material (metal) was assumed to have zero impedance, whereas the non-conductive material was simulated as a material with a finite but large enough impedance. The interpolation function of the impedance between conductive material and non-conductive material was taken as a tangential function. The design of planar metallic antenna was optimized for maximizing the efficiency at the target frequency. The results illustrated the effectiveness of the method.
基金supported by the National Natural Science Foundation of China (Grants 11332004, 11372063, and 11572073)the 111 Project (Grant B14013)
文摘In this paper, based on a tangential interpolation function and an adaptively increasing penalty-factor strategy(TIPS), a novel parameterization method with a self-penalization scheme aimed for the topology optimization of metallic antenna design is proposed. The topology description is based on the material distribution approach.The proposed tangential interpolation function aims to associate the material resistance with design variables, in which the material resistance is expressed in the arctangent scale and the arctangent resistance is interpolated with the design variables using the rational approximation of material properties. During the optimization process, a strategy with an adaptively increasing penalty factor is used to eliminate the remaining gray scale elements, as illustrated in examples,in the topology optimization based on the proposed tangential interpolation function. Design results of typical examples express the effectiveness of the proposed TIPS parameterization.
基金supported partially by the JSPS-CAS Core-University program in the field of 'Plasma and Nuclear Fusion'
文摘In large helical device （LHD）, antenna loadings are different for minority ion cyclotron heating （MICH with 38.47 MHz） and mode-converted ion Bernstein wave heating （MC-IBW with 28.4 MHz）, and it is necessary to improve antenna loading with low heating efficiency to avoid arching on transmission line. To design a new ion cyclotron range of frequencies （ICRF） antenna in LHD, calculation for a simple antenna model is conducted using three-dimensional electrical magnetic code （high frequency structure simulator, HFSS） for an water loading as an imaginary plasma with low heating efficiency. At resonant frequencies, antenna loading is sensitive to strap width, and resonant frequencies are strongly related to strap height. There is no differences of RF current profile on the strap surface between resonant frequency and non-resonant frequency. The strap should be perpendicularly placed against the magnetic field line, since Faraday-shield angle will lead to a decrease in the effective antenna height.
文摘An antenna array suitable for plasma heating and current drive has been designed for the ion cyclotron resonance frequency range （ICRF） heating on the EAST superconducting tokamak. The ICRF heating is planned to operate in a frequency range of 30 MHz to 80 MHz and hence the antenna geometry is optimized for 55 MHz. The design is based on the conventional strap antenna element. The coupling properties of the antenna are calculated with a slab model of the plasma for the antenna simulation. The coupling code is extended for the analysis of the toroidal antenna array separated by septa.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFE0205900)the Key Technologies R&D Program of Jiangsu(Prospective and Key Technologies for Industry)(Grant Nos.BE2022067 and BE2022067-2)。
文摘In this article,studies on the multimode excitation problem of waveguides and antennas,the balance/unbalance mech-anism and the balanced feeding techniques in dipole antenna systems are first briefly historically reviewed.In this context,general-ized odd-even mode theory is advanced to quantitatively and approximately describe the mutual coupling effect between a feed line and an antenna.As is mathematically deduced and demonstrated,the modal parity mismatch between the feed line and the antenna should ultimately dominate the unbalance phenomenon in antenna systems.Thus,an elegant,closed-form formula is derived to ap-proximately calculate the“unbalance degree”of a straight dipole off-center fed by a symmetric twin-wire line.Design approaches for the simplest,linear,1-D multimode resonant antennas are introduced.Moreover,the“falling tone excitation”law gauged based on prototype dipoles is revealed and used to develop a mode synthesis design approach for microstrip patch antennas(MPAs)and 2-D sectorial electric dipole antennas.Design examples with distinctive radiation performance are presented and discussed.Finally,possible development trends of multimode resonant antennas are prospected.
基金This study was supported by the Youth Innovation Promotion Association, Chinese Academy of Sciences and the National Science Foundation for Young Scholars of China （Grant No. 61505203）.
文摘In satellite laser communication technology, which is built between planets and between a planet and the Earth, the optical antenna is the key point. Thus, research on optical system design is important. The off-axis reflective system has no obscuration and hence possesses a high efficiency for energy transfer. This study proposes a novel method for designing a free-form off-axis reflective imaging system. This study also introduces differential equations that depend on Fermat＇s principle and sine condition. Finally, a free-form off-axis two-mirror optical system was designed by using the differential equation method. This system includes one intermediate image plane, in which the field of view （FOV） is -5° to -4° in the y-axis and -1° to 0° in the x-axis. The modulation transfer function was greater than 0.7 at 50 lp/mm, and the efficiency of energy transmission was high. The free-form off-axis two-mirror optical system involves a wide range of application prospects in the optical antenna used in the satellite laser communication systems. Moreover, the design method that used differ- ential equations was proven simple and effective.
基金Project supported by the National Natural Science Foundation of China(No.61971335).
文摘While many techniques have been developed for the design of different types of antennas,such as wire antenna,patch antenna,lenses,and reflectors,these cannot be said general-purpose strategies for the synthesis and design of antennas to achieve the performance characteristics specified by users.Recently,there has been an increasing need for the development of antenna design techniques because of the advent of 5 G and a variety of space,defense,biological,and similar applications,for which a robust and general-purpose design tool is not to be developed.The main objective of this study is to take a look at antenna design from the field manipulation point of view,which has the potential to partially fulfill this need.We review the existing field manipulation techniques,including field transformation methods based on Maxwell’s and wave equations,point out some limitations of these techniques,and then present ways to improve the performance of these methods.Next,we introduce an alternative approach for field manipulation based on two-dimensional(2 D)metasurfaces,and present laws of the generalized reflection and refraction that are based on 2 D surface electromagnetics.Then,we explore how to overcome the limitations of conventional reflection and refraction processes that are strictly bounded by the critical angle.Finally,we provide some application examples of field manipulation methods in the antenna design,with a view on developing a general-purpose strategy for antenna design for future communication.
基金co-supported by the National Natural Science Foundation of China (No. 51675458)the Key Project of Natural Science Foundation of Hebei Province of China (No. E2017203335)the Youth Top Talent Project of Hebei Province Higher Education of China (No. BJ2017060)
文摘Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3 RR-3 RRR deployable unit cannot be fully folded, this study proposes a 3 UU-3 URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3 UU-3 URU unit is analyzed. Then, the 3 UU-3 URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3 UU-3 URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3 UU-3 URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.
基金supported by Aeronautical Science Foundation of China (2017ZC52021)the Major Program of National Natural Science Foundation of China (61827801)
文摘To overcome the mutual coupling (MC) of multiple antennas in millimeter wave (mmWave) communication systems, a novel beam design method with low complexity is proposed in this paper. Firstly, an equivalent channel model incorporating the effect of MC is analyzed and established, and then an optimal precoding / combiner vector for beamforming is derived. On this basis, by using greedy geometric (GG) algorithm, a novel hybrid beam design method is proposed. Finally, the performance of proposed method is analyzed and compared with other traditional ones. The simulation results show that the proposed method has better suppression of the MC effect as well as lower complexity.
基金supported by the National Science Foundation of China under Grant No.61771295the Natural Science Young Foundation of Shanxi Province under Grant Nos.2014021021-1 and 2015011042
文摘The filter and antenna are two key components of the radio frequency(RF)front-end.When the antenna is directly connected with the filter,additional mismatch losses will be caused.Therefore,the antenna and filter are integrated into a single device to provide both filtering and radiating functions.In this way,many advantages,like low cost,light weight,small size and lower insertion loss can be obtained.In this paper,the co-design approaches of RF filter-antenna are reviewed.Based on the open literatures,the integrated approaches of filtering antenna can be classified into five main categories:1)Co-design by optimizing the interfacing impedance,2)co-design according to the synthesis approach of filter,3)co-design by embedding novel resonators within the feeding structures,4)co-design by employing auxiliary physical structures,and 5)other methods.The RF filter-antenna system can improve the integration degree of RF frontend,reduce its size and cost,and optimize its performance.
文摘The purpose of this work is to design and analyze an s-shaped printed circuit board (PCB) monopole antenna. The antenna was analyzed to operate at a resonance frequency band of 868 MHz;acceptable in 915 MHz as well. The s-shape is selected due to the need of reducing the overall size of the normal monopole antenna. The printed antenna was designed with an approximate overall size of 39 × 56 mm2 of which the antenna’s upper side is 26 × 39 mm2 while its reference ground board was sized at 39 × 30 mm2. The antenna is fed by a strip line of 3 × 1.5 mm2, in series with a 4.4 pF capacitance and shunt with an 8.7 nH inductance for purpose of antenna’s impedance matching with the input. A couple of existing publications showed that PCB antenna is not a new technology;however not an old technology for telecommunication industry. The raised problem by this work was duly solved with HFSS as a tool;excellent results are presented. After duly matching the antenna’s impedance with 50 Ω microstrip feed-line, solutions for overall performance were analyzed and demonstrated optimal: radiation patterns were proven omnidirectional, antenna gain optimized. The present antenna prototype’s overall dimensions can be readjusted according to any industrial and manufacturing requests.
文摘A six-element Yagi-Uda array is optimally designed using Central Force Optimization (CFO) with a small amount of pseudo randomly injected negative gravity. CFO is a simple, deterministic metaheuristic analogizing gravitational kinematics (motion of masses under the influence of gravity). It has been very effective in addressing a wide range of antenna and other problems and normally employs only positive gravity. With positive gravity the six element CFO-designed Yagi array described here exhibits excellent performance with respect to the objectives of impedance bandwidth and forward gain. This paper addresses the question of what happens when a small amount of negative gravity is injected into the CFO algorithm. Does doing so have any effect, beneficial, negative or neutral? In this particular case negative gravity improves CFO’s exploration and creates a region of optimality containing many designs that perform about as well as or better than the array discovered with only positive gravity. Without some negative gravity these array configurations are overlooked. This Yagi-Uda array design example suggests that antennas optimized or designed using deterministic CFO may well benefit by including a small amount of negative gravity, and that the negative gravity approach merits further study.
基金the Deanship of Scientific Research,Najran University.Kingdom of Saudi Arabia,for funding this work under the Research Collaborations funding program Grant Code Number(NU/RC/SERC//11/5).
文摘A compact,reconfigurable antenna supporting multiple wireless services with a minimum number of switches is found lacking in literature and the same became the focus and outcome of this work.It was achieved by designing a Th-Shaped frequency reconfigurable multi-band microstrip planar antenna,based on use of a single switch within the radiating structure of the antenna.Three frequency bands(i.e.,2007–2501 MHz,3660–3983MHz and 9341–1046 MHz)can be operated with the switch in the ON switch state.In the OFF state of the switch,the antenna operates within the 2577–3280MHz and 9379–1033MHz Bands.The proposed antenna shows an acceptable input impedance match with Voltage Standing Wave Ratio(VSWR)less than 1.2.The peak radiation efficiency of the antenna is 82%.A reasonable gain is obtained from 1.22 to 3.31 dB within the operating bands is achieved.The proposed antenna supports UniversalMobile Telecommunication System(UMTS)-1920 to 2170 MHz,Worldwide Interoperability and Microwave Access(WiMAX)/Wireless Broadband/(Long Term Evolution)LTE2500–2500 to 2690 MHz,Fifth Generation(5G)-2500/3500 MHz,Wireless Fidelity(Wi-Fi)/Bluetooth-2400 to 2480 MHz,and Satellite communication applications in X-Band-8000 to 12000 MHz.The overall planar dimension of the proposed antenna is 40×20mm2.The antennawas designed,along with the parametric study,using Electromagnetic(EM)simulation tool.The antenna prototype is fabricated for experimental validation with the simulated results.The proposed antenna is low profile,tunable,lightweight,cheap to fabricate and highly efficient and hence is deemed suitable for use in modern wireless communication electronic devices.
文摘In the process of radar data acquisition,limited amount of information can be provided to post-processing interpretation by the data acquisition method of single-input and single-output,however,the location and physical parameter information of geological body can be obtained more accurately by using Multi-Input Multi-Output(MIMO)antenna with multiple transmitters and multiple receivers.Especially when collecting borehole radar data and the aperture is very narrow,but the antenna is required to be able to ensure better results in a larger frequency band,therefore,the size of the antenna will be greatly challenged.Meanwhile,the close arrangement of multiple transmitting and receiving antennas will inevitably affect the signal radiation.Based on the borehole radar,this paper simulates and optimizes the Single-Input Multi-Output antenna(SIMO antenna),the size of which meets the aperture requirements,using HFSS antenna simulation software,and explores the factors affecting the antenna return loss and isolation.Among them,the radius of the dipole has little effect on the return loss and isolation,whereas increasing the number of receiving antennas or increasing the transceiver distance will significantly affect the antenna coupling,with a significant reduction in the amplitude of isolation.
