The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection （DPD） method in the signal waveform modulation multi-level （SWML） re...The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection （DPD） method in the signal waveform modulation multi-level （SWML） read-only disc. To solve this problem, this paper proposes a new tracking error detection method using amplitude difference. Based on the diffraction theory, the amplitude difference is proportional to the tracking error and is feasible to be used for obtaining the off-track information. The experimental system of the amplitude difference detection method is developed. The experimental results show that the tracking error signal derived from the new method has better performance in uniformity and signal-to-noise ratio than that derived from the conventional DPD method in the SWML read-only disc.展开更多
In the long distance GIL under certain conditions, this paper researches and realizes detection of PD characters and accurate fault localization through UHF coupling sensors at different positions of the GIL pipeline....In the long distance GIL under certain conditions, this paper researches and realizes detection of PD characters and accurate fault localization through UHF coupling sensors at different positions of the GIL pipeline. The main methods for the detection are UHF signal amplitude difference （DOA） and time difference （TOF）. We analyze the localization error by using TE and TEM component and high order TE mode component in electromagnetic coaxial wave guide theory. Research and field test prove the DOA detection error can meet the requirements of real-time online diagnosis and for history tracking analysis. The error of TOF detection method can be controlled within 3% and can be applied to the site.展开更多
River embankments are designed to defend against floods over coastal and riparian areas.It is important to early detect unexpected damages on embankments before they exacerbate.To continuously monitor the stability of...River embankments are designed to defend against floods over coastal and riparian areas.It is important to early detect unexpected damages on embankments before they exacerbate.To continuously monitor the stability of the embankments and efficiently recognize such potential damages,this study takes SAR(Synthetic Aperture Radar)derived deformation as an indicator of the embankment instability,and customizes a multi-temporal InSAR(Interferometric SAR)approach-small baseline subset.Specifically,during InSAR processing,we apply a two-step amplitude difference dispersion threshold method to extract InSAR measurement points,thus improving the point density within the embankment.We applied this method to the Kangshan Embankment(KE)using 147 Sentinel-1 acquired between 2017 and 2021.We categorized KE into Waterside Slope(WS),Embankment Top(ET),and Landside Slope(LS)using InSAR height estimation.Given the dominance of downslope movement,we developed a projection matrix from InSAR-derived deformation in the satellite line-of-sight direction onto WS and LS.The study shows that KE was generally stable during the five-year period,while WS,ET,and LS experienced different deformation processes.For instance,seasonal variation was observed from the deformation time series,especially between every April and November.We applied the principal component analysis to the time-series displacement and analyzed the results in conjunction with the rainfall data of Kangshan Township.It showed that deformation due to rainfall equals 80.93%,81.30%,and 82.46%of the total deformation for WS,ET,and LS,respectively,indicating that rainfall is one of the environmental driving factors affecting the deformations.We conclude that the proposed methodology is suited for systematic embankment monitoring and identifies major driving forces.展开更多
Based on the difference of wave impedance between sand layer and surrounding rock, the seismic wave numerical simulation software, Tesseral-2D is used to establish the sandstone formation model containing water, oil a...Based on the difference of wave impedance between sand layer and surrounding rock, the seismic wave numerical simulation software, Tesseral-2D is used to establish the sandstone formation model containing water, oil and gas respectively, and the three models are treated by post-stack time offset under the conditions of defined channel spacing, wavelet frequency and wave velocity of different rock mass, and the root means square amplitude difference attribute profile under the condition of water-filled oil-filled and gas-filled oil-filled is obtained. From this, it can be obtained that after oil-gas substitution occurs in weak non-mean reservoirs, the root-mean-square amplitude difference from the reservoir to the lower part of the reservoir experiences a mutation process from a positive maximum to a negative maximum, while after oil-water substitution, the root-mean-square amplitude difference from the reservoir to the lower part of the reservoir experiences a mutation process from zero to a positive maximum. For a strong heterogeneous reservoir. Therefore, for Weak inhomogeneous media similar to tight sandstone, the root-mean-square amplitude difference attribute can be used to detect the distribution of fluid in the actual gas drive or water drive oil recovery process.展开更多
Distribution of monsoon forests is important for the research of carbon and water cycles in the tropical regions. In this paper, a simple approach is proposed to map monsoon forests using the Normalized Difference Veg...Distribution of monsoon forests is important for the research of carbon and water cycles in the tropical regions. In this paper, a simple approach is proposed to map monsoon forests using the Normalized Difference Vegetation lndex （NDVI） derived from the Moderate Resolution Imaging Spectroradiometer （MODIS） data. Owing to the high contrast of greenness between wet season and dry season, the monsoon forest can be easily discriminated from other forests by combining the maximum and minimum annual NDVI. The MODIS-based monsoon forest maps （MODMF） from 2000 to 2009 are derived and evaluated using the ground-truth dataset. The MODMF achieves an average producer accuracy of 80.0% and the Kappa statistic of 0.719. The variability of MODMF among different years is compared with that calculated from MODIS land cover products （MCD 12Q 1）. The results show that the coefficient of variation of total monsoon forest area in MODMF is 7.3%, which is far lower than that in MCD12Q1 with 24.3%. Moreover, the pixels in MODMv which can be identified for 7 to 9 times between 200l and 2009 account for 53.1%, while only 7.9% ofMCD12QI pixels have this frequency. Additionally, the monsoon forest areas estimated in MODMF, Global Land Cover 2000 （GLC2000）, MCDI2Q1 and University of Maryland （UMD） products are compared with the statistical dataset at national level, which reveals that MODMv has the highest R^2 of 0.95 and the lowest RMSE of 14 014 km^2. This algorithm is simple but reliable for mapping the monsoon forests without complex classification techniques.展开更多
基金Project supported by the National Natural Science Foundation of China (Grant No. 60977005)
文摘The sub-land/sub-pit affects the characteristic of the tracking error signal which is generated by the conventional differential phase detection （DPD） method in the signal waveform modulation multi-level （SWML） read-only disc. To solve this problem, this paper proposes a new tracking error detection method using amplitude difference. Based on the diffraction theory, the amplitude difference is proportional to the tracking error and is feasible to be used for obtaining the off-track information. The experimental system of the amplitude difference detection method is developed. The experimental results show that the tracking error signal derived from the new method has better performance in uniformity and signal-to-noise ratio than that derived from the conventional DPD method in the SWML read-only disc.
文摘In the long distance GIL under certain conditions, this paper researches and realizes detection of PD characters and accurate fault localization through UHF coupling sensors at different positions of the GIL pipeline. The main methods for the detection are UHF signal amplitude difference （DOA） and time difference （TOF）. We analyze the localization error by using TE and TEM component and high order TE mode component in electromagnetic coaxial wave guide theory. Research and field test prove the DOA detection error can meet the requirements of real-time online diagnosis and for history tracking analysis. The error of TOF detection method can be controlled within 3% and can be applied to the site.
基金National Natural Science Foundation of China(No.41830110)National Key Research Development Program of China(No.2018YFC1503603)+2 种基金State Scholarship Fund from the Chinese Scholarship Council(No.202206710096)Project of China Railway Corporation(No.2021-key-14,2021-major-08)The Joint Planning of Technology and Water Conservancy of Jiangxi Province(No.2022KSG01009).
文摘River embankments are designed to defend against floods over coastal and riparian areas.It is important to early detect unexpected damages on embankments before they exacerbate.To continuously monitor the stability of the embankments and efficiently recognize such potential damages,this study takes SAR(Synthetic Aperture Radar)derived deformation as an indicator of the embankment instability,and customizes a multi-temporal InSAR(Interferometric SAR)approach-small baseline subset.Specifically,during InSAR processing,we apply a two-step amplitude difference dispersion threshold method to extract InSAR measurement points,thus improving the point density within the embankment.We applied this method to the Kangshan Embankment(KE)using 147 Sentinel-1 acquired between 2017 and 2021.We categorized KE into Waterside Slope(WS),Embankment Top(ET),and Landside Slope(LS)using InSAR height estimation.Given the dominance of downslope movement,we developed a projection matrix from InSAR-derived deformation in the satellite line-of-sight direction onto WS and LS.The study shows that KE was generally stable during the five-year period,while WS,ET,and LS experienced different deformation processes.For instance,seasonal variation was observed from the deformation time series,especially between every April and November.We applied the principal component analysis to the time-series displacement and analyzed the results in conjunction with the rainfall data of Kangshan Township.It showed that deformation due to rainfall equals 80.93%,81.30%,and 82.46%of the total deformation for WS,ET,and LS,respectively,indicating that rainfall is one of the environmental driving factors affecting the deformations.We conclude that the proposed methodology is suited for systematic embankment monitoring and identifies major driving forces.
文摘Based on the difference of wave impedance between sand layer and surrounding rock, the seismic wave numerical simulation software, Tesseral-2D is used to establish the sandstone formation model containing water, oil and gas respectively, and the three models are treated by post-stack time offset under the conditions of defined channel spacing, wavelet frequency and wave velocity of different rock mass, and the root means square amplitude difference attribute profile under the condition of water-filled oil-filled and gas-filled oil-filled is obtained. From this, it can be obtained that after oil-gas substitution occurs in weak non-mean reservoirs, the root-mean-square amplitude difference from the reservoir to the lower part of the reservoir experiences a mutation process from a positive maximum to a negative maximum, while after oil-water substitution, the root-mean-square amplitude difference from the reservoir to the lower part of the reservoir experiences a mutation process from zero to a positive maximum. For a strong heterogeneous reservoir. Therefore, for Weak inhomogeneous media similar to tight sandstone, the root-mean-square amplitude difference attribute can be used to detect the distribution of fluid in the actual gas drive or water drive oil recovery process.
基金National Natural Science Foundation of China(No.41171285)Research and Development Special Fund for Public Welfare Industry(Meteorology)of China(No.GYHY201106014)
文摘Distribution of monsoon forests is important for the research of carbon and water cycles in the tropical regions. In this paper, a simple approach is proposed to map monsoon forests using the Normalized Difference Vegetation lndex （NDVI） derived from the Moderate Resolution Imaging Spectroradiometer （MODIS） data. Owing to the high contrast of greenness between wet season and dry season, the monsoon forest can be easily discriminated from other forests by combining the maximum and minimum annual NDVI. The MODIS-based monsoon forest maps （MODMF） from 2000 to 2009 are derived and evaluated using the ground-truth dataset. The MODMF achieves an average producer accuracy of 80.0% and the Kappa statistic of 0.719. The variability of MODMF among different years is compared with that calculated from MODIS land cover products （MCD 12Q 1）. The results show that the coefficient of variation of total monsoon forest area in MODMF is 7.3%, which is far lower than that in MCD12Q1 with 24.3%. Moreover, the pixels in MODMv which can be identified for 7 to 9 times between 200l and 2009 account for 53.1%, while only 7.9% ofMCD12QI pixels have this frequency. Additionally, the monsoon forest areas estimated in MODMF, Global Land Cover 2000 （GLC2000）, MCDI2Q1 and University of Maryland （UMD） products are compared with the statistical dataset at national level, which reveals that MODMv has the highest R^2 of 0.95 and the lowest RMSE of 14 014 km^2. This algorithm is simple but reliable for mapping the monsoon forests without complex classification techniques.
