In a few-mode erbium-doped fiber(FM-EDF),which is a key section in a space-division multiplexing(SDM)communication system,linearly polarized(LP)and orbital angular momentum(OAM)modes,as twomode bases with different ph...In a few-mode erbium-doped fiber(FM-EDF),which is a key section in a space-division multiplexing(SDM)communication system,linearly polarized(LP)and orbital angular momentum(OAM)modes,as twomode bases with different phase profiles,can be transformed into each other.In principle,the LP and OAM modes have a different mode spatial intensity distribution and a gain difference for FM-EDF amplifiers.How to analyze and characterize the differential mode-bases gain(DMBG)is important,but still an issue.We build,for the first time to our knowledge,a local analysis model composed of discrete elements of the FM-EDF cross section in areas of mode spatial intensity distribution azimuthal variation.Using the model of the two mode bases,analysis of local particle number distribution and detailed description of the local gain difference are realized,and the overall gain difference between the two mode bases is obtained.By building an amplifier system based on mode phase profile controlling,the gain of two mode bases is characterized experimentally.The measured DMBG is∼0.8 dB in the second-order mode,which is consistent with the simulation result.This result provides a potential way to reduce the mode gain difference in the FM-EDF,which is important in improving the performance of the SDM communication system.展开更多
In the field of short-range optical interconnects,the development of low-power-consumption,ultrawideband on-chip optical waveguide amplifiers is of critical importance.Central to this advancement is the creation of ho...In the field of short-range optical interconnects,the development of low-power-consumption,ultrawideband on-chip optical waveguide amplifiers is of critical importance.Central to this advancement is the creation of host materials that require low pump power and provide ultrabroadband emission capabilities.We introduce a tri-doped lanthanum aluminate glass(composition:5Er_(2)O_(3)-5Yb_(2)O_(3)-0.2Tm_(2)O_(3)-43.8La_(2)O_(3)-46Al_(2)O_(3)),which exhibits exceptional near-infrared(NIR)luminescence intensity,significantly outperforming other bands by 3 orders of magnitude.This glass can achieve an ultrawideband NIR gain spanning 478 nm,from 1510 to 1988 nm.Notably,the glass achieves positive optical gain with a low population inversion threshold(P>0.2),highlighting its efficiency and low-power consumption.The high glass transition temperature(Tg∼842°C)and large temperature difference(ΔT∼120°C)between Tg and the onset of crystallization(Tx)indicate excellent thermal stability,which is crucial for producing high-quality amorphous films for on-chip amplifiers.This research examines the unique energy levels and spectral properties of the Er^(3+)-Yb^(3+)-Tm^(3+) tri-doped glass,assessing its potential for use in ultrawideband on-chip optical waveguide amplifiers.This work lays the groundwork for low-power,ultrabroadband on-chip waveguide amplifiers,offering new avenues for short-range optical interconnect systems.展开更多
Bidirectional EDFAs(Bi-EDFAs)featuring bidirectional signal input are theoreticallystudied.Gain and noise performances of Bi-EDFAs are analysed numerically and comparedwith that of other optical amplifiers.Application...Bidirectional EDFAs(Bi-EDFAs)featuring bidirectional signal input are theoreticallystudied.Gain and noise performances of Bi-EDFAs are analysed numerically and comparedwith that of other optical amplifiers.Applications of Bi-EDFAs in fiber networks and otherfields are considered.展开更多
We theoretically and experimentally show the impact of the ratio between the signal and idler generated from the PIA part on the gain characteristics in the continuous wave (CW) pump non-degenerate cascaded phase-sens...We theoretically and experimentally show the impact of the ratio between the signal and idler generated from the PIA part on the gain characteristics in the continuous wave (CW) pump non-degenerate cascaded phase-sensitive fiber optical parametric amplifier (PS-FOPA). The results show that the length of highly nonlinear fiber (HNLF) used for generating the idler can cause the variation of power ratio between the idler and signal, which significantly affects the gain characteristics of the PS-FOPA under the small signal gain condition. To obtain high gain, it is better to choose long HNLF to generate idler. In our experiment, 5.5 dB gain and 18 nm bandwidth (on/off gain>10 dBm) in PS-FOPA can be achieved when 300 m-long HNLF instead of 200 m-long HNLF is used in PIA.展开更多
To reduce the number of digital predistortion coefficients, a step memory polynomial （SMP）predistorter is presented. The number of predistortion coefficients is decreased by adjusting the maximum nonlinear order for...To reduce the number of digital predistortion coefficients, a step memory polynomial （SMP）predistorter is presented. The number of predistortion coefficients is decreased by adjusting the maximum nonlinear order for different memory orders in the traditional memory polynomial （MP）predistorter. The proposed SNIP predistorter is identified by an offline learning structure on which the coefficients can be extracted directly from the sampled input and output of a PA. Simulation results show that the SMP predistorter is not tied to a particular PA model and is, therefore, robust. The effectiveness of the SMP predistorter is demonstrated by simulations and experiments on an MP model, a parallel Wiener model, a Wiener-Hammerstein model, a sparsedelay memory polynomial model and a real PA which is fabricated based on the Freescale LDMOSFET MRF21030. Compared with the traditional MP predistorter, the SMP predistorter can reduce the number of coefficients by 60%.展开更多
To compensate for nonlinear distortion introduced by RF power amplifiers （PAs） with memory effects, two correlated models, namely an extended memory polynomial （EMP） model and a memory lookup table （LUT） model, ...To compensate for nonlinear distortion introduced by RF power amplifiers （PAs） with memory effects, two correlated models, namely an extended memory polynomial （EMP） model and a memory lookup table （LUT） model, are proposed for predistorter design. Two adaptive digital predistortion （ADPD） schemes with indirect learning architecture are presented. One adopts the EMP model and the recursive least square （RLS） algorithm, and the other utilizes the memory LUT model and the least mean square （LMS） algorithm. Simulation results demonstrate that the EMP-based ADPD yields the best linearization performance in terms of suppressing spectral regrowth. It is also shown that the ADPD based on memory LUT makes optimum tradeoff between performance and computational complexity.展开更多
Transistors are nonlinear devices, which can produce nonlinear distortion in amplifier while amplifying signals. For weak nonlinear distortion, the expressions of total harmonic distortion (THD), the second order in...Transistors are nonlinear devices, which can produce nonlinear distortion in amplifier while amplifying signals. For weak nonlinear distortion, the expressions of total harmonic distortion (THD), the second order intermodulation distortion(IM2 ), the third order intermodulation distortion(IM 3) and intercept point(IP 3) are deduced. With the aid of software Multisim, we simulate transistor common emitter amplifier, transistor common emitter amplifier with resistor in emitter, differential amplifier and differential amplifier with resistor between emitters. The simulational results and theoretical analyses are almost the same.展开更多
In this paper,we report a simulation study on the performance enhancement of Praseodymium doped silica fiber amplifiers(PDFAs)in O-band(1270-1350 nm)in terms of small signal gain,power conversion efficiency(PCE),and o...In this paper,we report a simulation study on the performance enhancement of Praseodymium doped silica fiber amplifiers(PDFAs)in O-band(1270-1350 nm)in terms of small signal gain,power conversion efficiency(PCE),and output optical power by employing bidirectional pumping.The PDFA performance is examined by optimizing the length of Praseodymium doped silica fiber(PDF),its mode-field diameter(MFD)and the concentration of Pr^(3+).A small-signal peak gain of 56.4 dB,power conversion efficiency(PCE)of 47%,and output optical power of around 1.6 W(32 dBm)is observed at optimized parameters for input signal wavelength of 1310 nm.Minimum noise figure(NF)of 4.1 dB is observed at input signal wavelength of 1310 nm.Moreover,the effect of varying the pump wavelength and pump power on output optical power of the amplifier and amplified spontaneous emission(ASE)noise is also investigated,respectively.Finally,the impact of ion-ion interaction(up-conversion effect)on small-signal gain of the amplifier is also studied by considering different values of up-conversion coefficient.展开更多
A state space model(SSM) is derived for quantum-dot semiconductor optical amplifiers(QD-SOAs).Rate equations of QD-SOA are formulated in the form of state update equations,where average occupation probabilities along ...A state space model(SSM) is derived for quantum-dot semiconductor optical amplifiers(QD-SOAs).Rate equations of QD-SOA are formulated in the form of state update equations,where average occupation probabilities along QD-SOA cavity are considered as state variables of the system.Simulations show that SSM calculates QD-SOA′s static and dynamic characteristics with high accuracy.展开更多
A robust digital predistortion(DPD)technique utilizing negative feedback iteration is introduced for linearizing power amplifiers(PAs)in long term evolution(LTE)/5G systems.Different from the conventional direct learn...A robust digital predistortion(DPD)technique utilizing negative feedback iteration is introduced for linearizing power amplifiers(PAs)in long term evolution(LTE)/5G systems.Different from the conventional direct learning and indirect learning structure,the proposed DPD suggests a two-step method to identify the predistortion.Firstly,a negative feedback based iteration is used to estimate the optimal DPD signal.Then the corresponding DPD parameters are extracted by forward modeling with the input signal and optimal DPD signal.The iteration can be applied to both single-band and dual-band PAs,which will achieve superior linear performance than the conventional direct learning DPD while having a relatively low computational complexity.The measurement is carried out on a broadband Doherty PA(DPA)with a 200 MHz bandwidth LTE signal at 2.1 GHz,and on a 5G DPA with two 10 MHz LTE signals at 3.4/3.6 GHz for validation in dual-band scenarios.展开更多
A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the paramet...A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the parameters, the back- propagation algorithm is applied to train the proposed neural networks. The proposed model is verified by the typical odd- order-only memory polynomial model in simulation, and the performance is compared with different numbers of taped delay lines（TDLs） and perceptrons of the hidden layer. For validating the TDFFNN model by experiments, a digital test bench is set up to collect input and output data of power amplifiers at a 60 × 10^6 sample/s sampling rate. The 3.75 MHz 16-QAM signal generated in the vector signal generator（VSG） is chosen as the input signal, when measuring the dynamic AM/AM and AM/PM characteristics of power amplifiers. By comparisons and analyses, the presented model provides a good performance in convergence, accuracy and efficiency, which is approved by simulation results and experimental results in the time domain and frequency domain.展开更多
RF power amplifiers (PAs) are usually considered as memoryless devices in most existing predistortion techniques. Nevertheless, in wideband communication systems, PA memory effects can no longer be ignored and memoryl...RF power amplifiers (PAs) are usually considered as memoryless devices in most existing predistortion techniques. Nevertheless, in wideband communication systems, PA memory effects can no longer be ignored and memoryless predistortion cannot linearize PAs effectively. After analyzing PA memory effects, a novel predistortion method based on wavelet networks (WNs) is proposed to linearize wideband RF power amplifiers. A complex wavelet network with tapped delay lines is applied to construct the predistorter and then a complex backpropagation algorithm is developed to train the predistorter parameters. The simulation results show that compared with the previously published feed-forward neural network predistortion method, the proposed method provides faster convergence rate and better performance in reducing out-of-band spectral regrowth.展开更多
In this paper, an envelope Hammerstein （EH） model is introduced to describe dynamic input -output characteristics of RF power amplifiers. In the modeling approach, we use a new truncation method and an established n...In this paper, an envelope Hammerstein （EH） model is introduced to describe dynamic input -output characteristics of RF power amplifiers. In the modeling approach, we use a new truncation method and an established nonlinear time series method to determine model structure. Then, we discuss the process of model parameter extraction in detailed. Finally, a 2 W WCDMA power amplifier is measured to verify the performance of EH model, and good agreement between model output and measurement result shows our model can accurately predict output characteristic of the power amplifier.展开更多
An analytic solution derived by multisection model to the small-signal frequency response （SSFR） of wavelength conversion based on cross-gain modulation （XGM） in semiconductor optical amplifiers （SOAs） is presen...An analytic solution derived by multisection model to the small-signal frequency response （SSFR） of wavelength conversion based on cross-gain modulation （XGM） in semiconductor optical amplifiers （SOAs） is presented. The result contains details that can affect the characteristics of SSFR significantly more than previous ones.展开更多
RF power amplifiers （PAs） are usually considered as memoryless devices in most existing predistortion techniques. However, in broadband communication systems, such as WCDMA, the PA memory effects are significant, an...RF power amplifiers （PAs） are usually considered as memoryless devices in most existing predistortion techniques. However, in broadband communication systems, such as WCDMA, the PA memory effects are significant, and memoryless predistortion cannot linearize the PAs effectively. After analyzing the PA memory effects, a novel predistortion method based on the simplified Volterra series is proposed to linearize broadband RF PAs with memory effects. The indirect learning architecture is adopted to design the predistortion scheme and the reeursive least squares algorithm with forgetting factor is applied to identify the parameters of the predistorter. Simulation results show that the proposed predistortion method can compensate the nonlinear distortion and memory effects of broadband RF PAs effectively.展开更多
Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation result...Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.展开更多
An envelope domain multislice behavioral modeling is introduced. The tradition AM-AM and AM- PM characteristics of power amplifiers axe extended to envelope domain and base-band filter is applied to distortion complex...An envelope domain multislice behavioral modeling is introduced. The tradition AM-AM and AM- PM characteristics of power amplifiers axe extended to envelope domain and base-band filter is applied to distortion complex envelope signal for description of the envelope memory effect. Using traditional one and two-tone tests, the coefficients of nonlinear model and the FIR filter can be extracted. At last the model has been applied to a 10 W WCDMA Power amplifier to predict its output signal. And simulation results show that the model output conforms very well to the traditional transistor level simulation results.展开更多
Symbolic circuit simulator is traditionally applied to the small-signal analysis of analog circuits. This paper establishes a symbolic behavioral macromodeling method applicable to both small-signal and large-signal a...Symbolic circuit simulator is traditionally applied to the small-signal analysis of analog circuits. This paper establishes a symbolic behavioral macromodeling method applicable to both small-signal and large-signal analysis of general two-stage operational amplifiers （op-amps）. The proposed method creates a two-pole parametric macromodel whose parameters are analytical functions of the circuit element parameters generated by a symbolic circuit simulator. A moment matching technique is used in deriving the analytical model parameter. The created parametric behavioral model can be used for op-amps performance simulation in both frequency and time domains. In particular, the parametric models are highly suited for fast statistical simulation of op-amps in the time-domain. Experiment results show that the statistical distributions of the op-amp slew and settling time characterized by the proposed model agree well with the transistor-level results in addition to achieving significant speedup.展开更多
Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO：LiNbO 3 crystal...Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO：LiNbO 3 crystals pumped at 1.064 μm.The maximum pulse energy reaches 1.3 mJ at 1.464 μm and 0.47 mJ at 3.894 μm,corresponding to a pumpto-idler photon conversion efficiency of 25%.By seeding the hard-to-measure mid-infrared radiation as the idler in the optical parametric amplification and measuring the amplified and frequency up-converted signal in the near-infrared or even visible region,one can measure very week mid-infrared radiation with ordinary detectors,which are insensitive to mid-infrared radiation,with a very high gain.A maximum gain factor of about 7 脳 10 7 is achieved at the mid-infrared wavelength of 3.374 μm and the corresponding energy detection limit is as low as about 390 aJ per pulse.展开更多
The propagation of optical solitons in fiber amplifiers is discussed by considering a model that includes linear high order dispersion, two photon absorption, nonlinear high order dispersion, self induced Ramam and fi...The propagation of optical solitons in fiber amplifiers is discussed by considering a model that includes linear high order dispersion, two photon absorption, nonlinear high order dispersion, self induced Ramam and five order nonlinear effects. Based on travelling wave method, the solutions of the nonlinear Schr dinger equations, and the influence on soliton propagation as well as high order effect in the fiber amplifier are discussed in detail. It is found that because of existing five order nonlinear effect, the solution is not of secant hyperbola type, but shows high gain state of the fiber amplifier which is very favourable to the propagation of solitons.展开更多
基金supported by the National Key Research and Development Program of China(Grant No.2019YFA0706300)the National Natural Science Foundation of China(Grant Nos.U22B2010,62035018,and U2001601)+1 种基金the Program of Marine Economy Development Special Fund(Six Marine Industries)under the Department of Natural Resources of Guangdong Province(Grant No.GDNRC[2024]16)the project supported by the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(Grant No.SML2023SP231).
文摘In a few-mode erbium-doped fiber(FM-EDF),which is a key section in a space-division multiplexing(SDM)communication system,linearly polarized(LP)and orbital angular momentum(OAM)modes,as twomode bases with different phase profiles,can be transformed into each other.In principle,the LP and OAM modes have a different mode spatial intensity distribution and a gain difference for FM-EDF amplifiers.How to analyze and characterize the differential mode-bases gain(DMBG)is important,but still an issue.We build,for the first time to our knowledge,a local analysis model composed of discrete elements of the FM-EDF cross section in areas of mode spatial intensity distribution azimuthal variation.Using the model of the two mode bases,analysis of local particle number distribution and detailed description of the local gain difference are realized,and the overall gain difference between the two mode bases is obtained.By building an amplifier system based on mode phase profile controlling,the gain of two mode bases is characterized experimentally.The measured DMBG is∼0.8 dB in the second-order mode,which is consistent with the simulation result.This result provides a potential way to reduce the mode gain difference in the FM-EDF,which is important in improving the performance of the SDM communication system.
基金supported by the National Natural Science Foundation of China(Grant No.62005098)the Fundamental Research Funds for the Central University(Grant No.11623415)the Guangzhou Science and Technology Planning Project(Grant No.202201010320).
文摘In the field of short-range optical interconnects,the development of low-power-consumption,ultrawideband on-chip optical waveguide amplifiers is of critical importance.Central to this advancement is the creation of host materials that require low pump power and provide ultrabroadband emission capabilities.We introduce a tri-doped lanthanum aluminate glass(composition:5Er_(2)O_(3)-5Yb_(2)O_(3)-0.2Tm_(2)O_(3)-43.8La_(2)O_(3)-46Al_(2)O_(3)),which exhibits exceptional near-infrared(NIR)luminescence intensity,significantly outperforming other bands by 3 orders of magnitude.This glass can achieve an ultrawideband NIR gain spanning 478 nm,from 1510 to 1988 nm.Notably,the glass achieves positive optical gain with a low population inversion threshold(P>0.2),highlighting its efficiency and low-power consumption.The high glass transition temperature(Tg∼842°C)and large temperature difference(ΔT∼120°C)between Tg and the onset of crystallization(Tx)indicate excellent thermal stability,which is crucial for producing high-quality amorphous films for on-chip amplifiers.This research examines the unique energy levels and spectral properties of the Er^(3+)-Yb^(3+)-Tm^(3+) tri-doped glass,assessing its potential for use in ultrawideband on-chip optical waveguide amplifiers.This work lays the groundwork for low-power,ultrabroadband on-chip waveguide amplifiers,offering new avenues for short-range optical interconnect systems.
基金a major project of the 8th Five-Year Plan of China.
文摘Bidirectional EDFAs(Bi-EDFAs)featuring bidirectional signal input are theoreticallystudied.Gain and noise performances of Bi-EDFAs are analysed numerically and comparedwith that of other optical amplifiers.Applications of Bi-EDFAs in fiber networks and otherfields are considered.
基金supported by the National Basic Research Program of China (Nos.2010CB327605 and 2010CB328300)the Specialized Research Fund for the Young Scholars Program of Beijing University of Posts and Telecommunications (Nos.2011RC0309 and 2011RC008)
文摘We theoretically and experimentally show the impact of the ratio between the signal and idler generated from the PIA part on the gain characteristics in the continuous wave (CW) pump non-degenerate cascaded phase-sensitive fiber optical parametric amplifier (PS-FOPA). The results show that the length of highly nonlinear fiber (HNLF) used for generating the idler can cause the variation of power ratio between the idler and signal, which significantly affects the gain characteristics of the PS-FOPA under the small signal gain condition. To obtain high gain, it is better to choose long HNLF to generate idler. In our experiment, 5.5 dB gain and 18 nm bandwidth (on/off gain>10 dBm) in PS-FOPA can be achieved when 300 m-long HNLF instead of 200 m-long HNLF is used in PIA.
基金The National High Technology Research and Development Program of China (863 Program) (No.2008AA01Z211)the Project of Industry-Academia-Research Demonstration Base of Education Ministry of Guangdong Province (No.2007B090200012)
文摘To reduce the number of digital predistortion coefficients, a step memory polynomial （SMP）predistorter is presented. The number of predistortion coefficients is decreased by adjusting the maximum nonlinear order for different memory orders in the traditional memory polynomial （MP）predistorter. The proposed SNIP predistorter is identified by an offline learning structure on which the coefficients can be extracted directly from the sampled input and output of a PA. Simulation results show that the SMP predistorter is not tied to a particular PA model and is, therefore, robust. The effectiveness of the SMP predistorter is demonstrated by simulations and experiments on an MP model, a parallel Wiener model, a Wiener-Hammerstein model, a sparsedelay memory polynomial model and a real PA which is fabricated based on the Freescale LDMOSFET MRF21030. Compared with the traditional MP predistorter, the SMP predistorter can reduce the number of coefficients by 60%.
文摘To compensate for nonlinear distortion introduced by RF power amplifiers （PAs） with memory effects, two correlated models, namely an extended memory polynomial （EMP） model and a memory lookup table （LUT） model, are proposed for predistorter design. Two adaptive digital predistortion （ADPD） schemes with indirect learning architecture are presented. One adopts the EMP model and the recursive least square （RLS） algorithm, and the other utilizes the memory LUT model and the least mean square （LMS） algorithm. Simulation results demonstrate that the EMP-based ADPD yields the best linearization performance in terms of suppressing spectral regrowth. It is also shown that the ADPD based on memory LUT makes optimum tradeoff between performance and computational complexity.
文摘Transistors are nonlinear devices, which can produce nonlinear distortion in amplifier while amplifying signals. For weak nonlinear distortion, the expressions of total harmonic distortion (THD), the second order intermodulation distortion(IM2 ), the third order intermodulation distortion(IM 3) and intercept point(IP 3) are deduced. With the aid of software Multisim, we simulate transistor common emitter amplifier, transistor common emitter amplifier with resistor in emitter, differential amplifier and differential amplifier with resistor between emitters. The simulational results and theoretical analyses are almost the same.
文摘In this paper,we report a simulation study on the performance enhancement of Praseodymium doped silica fiber amplifiers(PDFAs)in O-band(1270-1350 nm)in terms of small signal gain,power conversion efficiency(PCE),and output optical power by employing bidirectional pumping.The PDFA performance is examined by optimizing the length of Praseodymium doped silica fiber(PDF),its mode-field diameter(MFD)and the concentration of Pr^(3+).A small-signal peak gain of 56.4 dB,power conversion efficiency(PCE)of 47%,and output optical power of around 1.6 W(32 dBm)is observed at optimized parameters for input signal wavelength of 1310 nm.Minimum noise figure(NF)of 4.1 dB is observed at input signal wavelength of 1310 nm.Moreover,the effect of varying the pump wavelength and pump power on output optical power of the amplifier and amplified spontaneous emission(ASE)noise is also investigated,respectively.Finally,the impact of ion-ion interaction(up-conversion effect)on small-signal gain of the amplifier is also studied by considering different values of up-conversion coefficient.
文摘A state space model(SSM) is derived for quantum-dot semiconductor optical amplifiers(QD-SOAs).Rate equations of QD-SOA are formulated in the form of state update equations,where average occupation probabilities along QD-SOA cavity are considered as state variables of the system.Simulations show that SSM calculates QD-SOA′s static and dynamic characteristics with high accuracy.
基金National Key R&D Program of China under Grant No.2018YFB1801603 and No.2017YFF0206201National Sci⁃ence and Technology Major Project under Grant 2017ZX03001024,NSFC under Grant No.61801259 and Beijing National Research Center for Infor⁃mation Science and Technology(BNRist).
文摘A robust digital predistortion(DPD)technique utilizing negative feedback iteration is introduced for linearizing power amplifiers(PAs)in long term evolution(LTE)/5G systems.Different from the conventional direct learning and indirect learning structure,the proposed DPD suggests a two-step method to identify the predistortion.Firstly,a negative feedback based iteration is used to estimate the optimal DPD signal.Then the corresponding DPD parameters are extracted by forward modeling with the input signal and optimal DPD signal.The iteration can be applied to both single-band and dual-band PAs,which will achieve superior linear performance than the conventional direct learning DPD while having a relatively low computational complexity.The measurement is carried out on a broadband Doherty PA(DPA)with a 200 MHz bandwidth LTE signal at 2.1 GHz,and on a 5G DPA with two 10 MHz LTE signals at 3.4/3.6 GHz for validation in dual-band scenarios.
基金The National Natural Science Foundation of China(No.60621002)the National High Technology Research and Development Pro-gram of China(863 Program)(No.2007AA01Z2B4).
文摘A novel behavioral model using three-layer time-delay feed-forward neural networks （TDFFNN）is adopted to model radio frequency （RF）power amplifiers exhibiting memory nonlinearities. In order to extract the parameters, the back- propagation algorithm is applied to train the proposed neural networks. The proposed model is verified by the typical odd- order-only memory polynomial model in simulation, and the performance is compared with different numbers of taped delay lines（TDLs） and perceptrons of the hidden layer. For validating the TDFFNN model by experiments, a digital test bench is set up to collect input and output data of power amplifiers at a 60 × 10^6 sample/s sampling rate. The 3.75 MHz 16-QAM signal generated in the vector signal generator（VSG） is chosen as the input signal, when measuring the dynamic AM/AM and AM/PM characteristics of power amplifiers. By comparisons and analyses, the presented model provides a good performance in convergence, accuracy and efficiency, which is approved by simulation results and experimental results in the time domain and frequency domain.
基金Project (No. 60372026) supported by the National Natural ScienceFoundation of China
文摘RF power amplifiers (PAs) are usually considered as memoryless devices in most existing predistortion techniques. Nevertheless, in wideband communication systems, PA memory effects can no longer be ignored and memoryless predistortion cannot linearize PAs effectively. After analyzing PA memory effects, a novel predistortion method based on wavelet networks (WNs) is proposed to linearize wideband RF power amplifiers. A complex wavelet network with tapped delay lines is applied to construct the predistorter and then a complex backpropagation algorithm is developed to train the predistorter parameters. The simulation results show that compared with the previously published feed-forward neural network predistortion method, the proposed method provides faster convergence rate and better performance in reducing out-of-band spectral regrowth.
文摘In this paper, an envelope Hammerstein （EH） model is introduced to describe dynamic input -output characteristics of RF power amplifiers. In the modeling approach, we use a new truncation method and an established nonlinear time series method to determine model structure. Then, we discuss the process of model parameter extraction in detailed. Finally, a 2 W WCDMA power amplifier is measured to verify the performance of EH model, and good agreement between model output and measurement result shows our model can accurately predict output characteristic of the power amplifier.
基金Project supported by the National Nature Science Foundation of China （Grant No 60407001）, National High Technology Developing Program of China （Grant No 2006AA03Z0414）, the Science Fund for Distinguished YoungScholars of Hubei Province （Grant No 2006ABB017） and the Program for New Century Excellent Talents of Ministry of Education, China （Grant No NCET-04-0715）.
文摘An analytic solution derived by multisection model to the small-signal frequency response （SSFR） of wavelength conversion based on cross-gain modulation （XGM） in semiconductor optical amplifiers （SOAs） is presented. The result contains details that can affect the characteristics of SSFR significantly more than previous ones.
基金the National Natural Science Foundation of China (60671037).
文摘RF power amplifiers （PAs） are usually considered as memoryless devices in most existing predistortion techniques. However, in broadband communication systems, such as WCDMA, the PA memory effects are significant, and memoryless predistortion cannot linearize the PAs effectively. After analyzing the PA memory effects, a novel predistortion method based on the simplified Volterra series is proposed to linearize broadband RF PAs with memory effects. The indirect learning architecture is adopted to design the predistortion scheme and the reeursive least squares algorithm with forgetting factor is applied to identify the parameters of the predistorter. Simulation results show that the proposed predistortion method can compensate the nonlinear distortion and memory effects of broadband RF PAs effectively.
基金the National Natural Science Foundation of China(Grant Nos.62005313 and 62061136013).
文摘Impact of amplified spontaneous emission(ASE)noise on the stimulated Raman scattering(SRS)threshold of highpower fiber amplifiers is demonstrated numerically through a spectral evolution approach.The simulation results confirm that ASE noise in the Raman wavelength band could reduce the SRS threshold of high-power fiber amplifiers significantly.As for ASE noise originated the main amplifier,it becomes stronger and reduces the SRS threshold at shorter operation wavelength below 1052 nm.As for ASE noise originated from the seed laser,it reduces the SRS threshold at different operation wavelength under the condition that the Raman ratio is over-90 dB in the seed laser.The theoretical method and results in this work could provide a well reference to extend the operation wavelength of high-power fiber lasers.
文摘An envelope domain multislice behavioral modeling is introduced. The tradition AM-AM and AM- PM characteristics of power amplifiers axe extended to envelope domain and base-band filter is applied to distortion complex envelope signal for description of the envelope memory effect. Using traditional one and two-tone tests, the coefficients of nonlinear model and the FIR filter can be extracted. At last the model has been applied to a 10 W WCDMA Power amplifier to predict its output signal. And simulation results show that the model output conforms very well to the traditional transistor level simulation results.
文摘Symbolic circuit simulator is traditionally applied to the small-signal analysis of analog circuits. This paper establishes a symbolic behavioral macromodeling method applicable to both small-signal and large-signal analysis of general two-stage operational amplifiers （op-amps）. The proposed method creates a two-pole parametric macromodel whose parameters are analytical functions of the circuit element parameters generated by a symbolic circuit simulator. A moment matching technique is used in deriving the analytical model parameter. The created parametric behavioral model can be used for op-amps performance simulation in both frequency and time domains. In particular, the parametric models are highly suited for fast statistical simulation of op-amps in the time-domain. Experiment results show that the statistical distributions of the op-amp slew and settling time characterized by the proposed model agree well with the transistor-level results in addition to achieving significant speedup.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61078005)the National Basic ResearchProgram of China (Grant No. 2007CB613205)the China Postdoctoral Science Foundation
文摘Picosecond optical parametric generation and amplification in the near-infrared region within 1.361-1.656 μm and the mid-infrared region within 2.976-4.875 μm is constructed on the basis of bulk MgO：LiNbO 3 crystals pumped at 1.064 μm.The maximum pulse energy reaches 1.3 mJ at 1.464 μm and 0.47 mJ at 3.894 μm,corresponding to a pumpto-idler photon conversion efficiency of 25%.By seeding the hard-to-measure mid-infrared radiation as the idler in the optical parametric amplification and measuring the amplified and frequency up-converted signal in the near-infrared or even visible region,one can measure very week mid-infrared radiation with ordinary detectors,which are insensitive to mid-infrared radiation,with a very high gain.A maximum gain factor of about 7 脳 10 7 is achieved at the mid-infrared wavelength of 3.374 μm and the corresponding energy detection limit is as low as about 390 aJ per pulse.
文摘The propagation of optical solitons in fiber amplifiers is discussed by considering a model that includes linear high order dispersion, two photon absorption, nonlinear high order dispersion, self induced Ramam and five order nonlinear effects. Based on travelling wave method, the solutions of the nonlinear Schr dinger equations, and the influence on soliton propagation as well as high order effect in the fiber amplifier are discussed in detail. It is found that because of existing five order nonlinear effect, the solution is not of secant hyperbola type, but shows high gain state of the fiber amplifier which is very favourable to the propagation of solitons.
