Recent advances in geoscience have underscored the critical role of abiogenic processes in petroleum formation,especially the formation and polymerization of methane.However,whether a direct carbon-H_(2) reaction can ...Recent advances in geoscience have underscored the critical role of abiogenic processes in petroleum formation,especially the formation and polymerization of methane.However,whether a direct carbon-H_(2) reaction can produce C_(2+)hydrocarbons(e.g.,ethane and propane)beyond methane remains an open question.Here,we demonstrate the direct synthesis of ethane and propane via reactions between amorphous carbon and H_(2) under upper mantle conditions(2-10 GPa and 800-1200℃).A systematic investigation reveals that increasing structural disorder in carbon precursors,from graphite to glassy carbon-Ⅱ and carbon black,enhances the production of C_(2)-C_(3) hydrocarbons.Through integrated X-ray diffraction and reverse Monte Carlo simulations,we establish that the continuous random atomic network structures in amorphous carbon enable one-step synthesis of heavy hydrocarbons with H_(2).These models establish a direct link between atomic-scale carbon structures and the one-step synthesis of C_(2+) hydrocarbons under H_(2)-rich,high-pressure,and high-temperature conditions—potentially revealing an efficient mechanism for the abiotic production of C_(2+) hydrocarbons in the upper mantle.展开更多
[Background and purposes]Proton exchange membrane fuel cells(PEMFCs),which convert hydrogen energy directly into electrical energy and water,have received overwhelming attention,owing to their potential to significant...[Background and purposes]Proton exchange membrane fuel cells(PEMFCs),which convert hydrogen energy directly into electrical energy and water,have received overwhelming attention,owing to their potential to significantly reduce energy consumption,pollution emissions and reliance on fossil fuels.Bipolar plates are the major part and key component of PEMFCs stack,which provide mechanical strength,collect and conduct current segregate oxidants and reduce agents.They contribute 70-80%weight and 20-30%cost of a whole stack,while significantly affecting the power density.There are three types plates,including metal bipolar plate,graphite bipolar plate and composite bipolar plate.Stainless steel bipolar plates,as one of metal bipolar plate,exhibit promising manufacturability,competitive cost and durability among various metal materials.However,stainless steel would be corroded in the harsh acid(pH 2-5)and humid PEMFCs environment,whereas the leached ions will contaminate the membrane.In addition,the passivated film formed on the surface will increase the interfacial contact resistance(ICR).In order to improve the corrosion resistance and electrical conductivity of steel bipolar plates,surface coatings are essential.Metal nitride coatings,metal carbide coatings,polymer coatings and carbon-based coatings have been introduced in recent years.Carbon-based coatings,mainly including a-C(amorphous Carbon),Ta-C(Tetrahedral amorphous carbon)and DLC(diamond-like carbon),have attracted considerable attention from both academia and industry,owing to their superior performance,such as chemical inertness,mechanical hardness and electrical conductivity.However,Ta-C films as protective coating of PEMFCs have been rarely reported,due to the difficulty in production for industrial application.In this paper,multi-layer Ta-C composite films were produced by using customized industrial-scale vacuum equipment to address those issues.[Methods]Multiple layered Ta-C coatings were prepared by using PIS624 equipment,which assembled filtered cathodic arc evaporation,ion beam and magnetron sputtering into one equipment,while SS304 and silicon specimens were used as substrate for testing and analysis.Adhesion layer and intermediate layer were deposited by using magnetron sputtering at deposition temperature of 150℃and pressure of 3×10^(−1) Pa,while the sputtering current was set to be 5 A and bias power to be 300 V.The Ta-C layer was coated at arc current of 80-100 A,bias voltage of 1500 V and gas flow of 75 sccm.A scanning electron microscope(CIQTEK SEM3200)was used to characterize surface morphology,coating structure and cross-section profile of the coatings.Raman spectrometer(LabRam HR Evolution,HORIBA JOBIN YVON)was used to identify the bonding valence states.Electrochemical tests were performed by using an electrochemical work station(CHI760,Shanghai Chenhua Instrument Co.,Ltd.),with the traditional three electrode system,where saturated Ag/AgCl and platinum mesh were used as the reference electrode and counter electrode,respectively.All samples were mounted in plastic tube and sealed with epoxy resin,with an exposure area of 2.25 cm^(2),serving as the working electrode.Electrochemical measurements were carried out in simulated PEMFCs cathode environment in 0.5 mol·L^(−1) H_(2)SO_(4)+5 ppm F−solution,at operating temperature of 70℃.As the cathode environment was harsher than the anode environment,all the samples are stabilized at the open-circuit potential(OCP)for approximately 30 min before the EIS measurements.ICR between bipolar plates and GDL was a key parameter affecting performance of the PEMFCs stack.The test sample sandwiched between 2 pieces of carbon paper(simulate gas diffusion layer,GDL)was placed between 2 gold-plated copper electrodes at a compaction pressure of 1.4 MPa,which was considered to be the conventional compaction pressure in the PEMFCs.Under the same conditions,the resistance of a single carbon paper was measured as well.The ICR was calculated according to the formula ICR=1/2(R2−R1)×S,where S was the contact area between GDL and coated stainless steel BPPs.All data of ICR were measured three times for averaging.[Results]The coatings deposited by filtered cathodic arc technology were compact and smooth,which reduced coating porosity and favorable to corrosion resistance.The coating thickness of adhesion and intermediate layers were 180 nm,while the protective Ta-C coating thickness was about 300 nm,forming multiple coating to provide stronger protection for metal bipolar plates.Cr,Ti,Nb and Ta coatings were selected as adhesion layers for comparison.According to electrochemical test,Ta and Nb coatings have higher corrosion resistance.However,Ta and Nb materials would be costly when they are used for mass production.Relatively,Cr and Ti materials were cost effective.Hence,a comprehensive assessment was indispensable to decide the materials to be selected as adhesion layer.Ta-TiN and Ti-TiN combined adhesion and intermediate layer exhibited stronger corrosion resistance,with the corrosion current to be less than 10^(−6) A·cm^(−2).Ta-C protective coating deposited by using filtered cathodic arc technology indicated displayed higher corrosion resistance,with the average corrosion density to be about 1.26×10^(−7) A·cm^(−2).Ta-C coating also shown larger contact angle,with the highest hydrophobicity,which was one of the important advantages for Ta-C,in terms of corrosion resistance.According to Raman spectroscopy,the I(D)/I(G)=549.8/1126.7=0.487,with the estimated fraction of sp^(3) bonding to be in the range of 5154%.The intermediate layer TiN has higher conductivity than the CrN layer.Considering cost,corrosion performance and ICR result,the Ti-TiN layer combination is recommended for industrial scale application.[Conclusions]Multiple layer coating structure of Ta-C film had stronger corrosion resistance;with more than 50%sp^(3) content,while it also had larger water contact angle and higher corrosion resistance than DLC film.The filtered arcing deposition technology was able to make the film to be more consistent and stable than normal arcing technology in terms of the preparation of Ta-C.The coating displayed corrosion density of 1.26×10^(−7) A·cm^(−2) and ICR of less than 5 mΩ·cm^(2),far beyond technical target of 2025 DOE(US Department of Energy).This indicated that the mass-production scale coating technology for PEMFC bipolar plates is highly possible.展开更多
Carbon nanotubes(CNTs)reinforced copper(CNTs/Cu)is one of the most promising and extensively researched materials for replacing traditional Cu-based materials in high-load and high-current applications,particularly wi...Carbon nanotubes(CNTs)reinforced copper(CNTs/Cu)is one of the most promising and extensively researched materials for replacing traditional Cu-based materials in high-load and high-current applications,particularly within the aerospace industry.Amorphous carbon nanotubes(aCNTs)are a type of carbon nanotubes characterized by the presence of mesopores distributed across their amorphous sidewalls,facilitating connectivity between the hollow core and the external environment.Therefore,we propose utilizing aCNTs as a reinforcing agent for Cu.The mesoporous structure of aCNTs facilitates the interpenetration of Cu into the aCNTs,thereby maintaining the continuity of the matrix properties.Experimental results demonstrate that Cu effectively penetrates the mesoporous sidewalls of aCNTs.Both pure Cu and aCNTs-reinforced Cu exhibit comparable electrical conductivity,while the hardness of the aCNTs/Cu composite is significantly enhanced.Additionally,both the density and porosity of aCNTs/Cu are lower than those of pure Cu,and the introduction of aCNTs helps to reduce the sintering temperature.展开更多
A mixture of amorphous carbon and carbon nanotubes films was synthesized on stainless steel plates by a micro- wave plasma enhanced chemical vapor deposition system. The source gases were hydrogen and methane with flo...A mixture of amorphous carbon and carbon nanotubes films was synthesized on stainless steel plates by a micro- wave plasma enhanced chemical vapor deposition system. The source gases were hydrogen and methane with flow rates of 100 and 16sccm,respectively,with a total pressure of 5.0kPa. The surface morphology and the structure of the films were characterized by field emission scanning electron microscopy （SEM） and Raman scattering spectroscopy. Field emission properties of as-deposited film were measured in a vacuum room below 5 ×10^ 5 Pa. The experimental results show that the initial turn-on field is 0. 9V/μm; The current density is 4.0mA/cm2 and the emission sites are dense and uniform at an electric field of 3.7V/μm. These results indicate that such a mixture of amorphous carbon and carbon nanotubes films is a promising material for field emission applications.展开更多
Direct current metal filtered cathodic vacuum arc （FCVA） and acetylene gas （C2H2） were wielded to synthesize Ti-containing amorphous carbon films on Si （100）. The influence of substrate bias voltage and acetylen...Direct current metal filtered cathodic vacuum arc （FCVA） and acetylene gas （C2H2） were wielded to synthesize Ti-containing amorphous carbon films on Si （100）. The influence of substrate bias voltage and acetylene gas on the microstructure and mechanical properties of the films were investigated. The results show that the phase of TiC in the （111） preferential crystallographic orientation exists in the film,and the main existing pattern of carbon is sp2. With increasing the acetylene flow rate,the contents of Ti and TiC phase of the film gradually reduce; however,the thickness of the film increases. When the substrate bias voltage reaches -600 V,the internal stress of the film reaches 1.6 GPa. The micro-hardness and elastic modulus of the film can reach 33.9 and 237.6 GPa,respectively,and the friction coefficient of the film is 0.25.展开更多
Crystalline Fe/MnO@C core–shell nanocapsules inlaid in porous amorphous carbon matrix(FMCA)was synthesized successfully with a novel confinement strategy.The heterogeneous Fe/MnO nanocrystals are with approximate sin...Crystalline Fe/MnO@C core–shell nanocapsules inlaid in porous amorphous carbon matrix(FMCA)was synthesized successfully with a novel confinement strategy.The heterogeneous Fe/MnO nanocrystals are with approximate single-domain size which gives rise to natural resonance in 2–18 GHz.The addition of MnO2 confines degree of graphitization catalyzed by iron and contributes to the formation of amorphous carbon.The heterogeneous materials composed of crystalline–amorphous structures disperse evenly and its density is significantly reduced on account of porous properties.Meanwhile,adjustable dielectric loss is achieved by interrupting Fe core aggregation and stacking graphene conductive network.The dielectric loss synergistically with magnetic loss endows the FMCA enhanced absorption.The optimal reflection loss(RL)is up to−45 dB,and the effective bandwidth(RL<−10 dB)is 5.0 GHz with 2.0 mm thickness.The proposed confinement strategy not only lays the foundation for designing high-performance microwave absorber,but also offers a general duty synthesis method for heterogeneous crystalline–amorphous composites with tunable composition in other fields.展开更多
Hydrogenated amorphous carbon films were fabricated by using layer-by-layer deposition method and hydrogen dilution method in a small d.c.-assisted plasma enhanced chemical vapor deposition system. It was found that t...Hydrogenated amorphous carbon films were fabricated by using layer-by-layer deposition method and hydrogen dilution method in a small d.c.-assisted plasma enhanced chemical vapor deposition system. It was found that the hydrogen plasma treatment could change the sp2/sp3 ratio to some extent by chemical etching. The improvements of field emission characteristics were observed compared with that from conventionally deposited a-C films, which can be attributed to the large field enhancement effect due to the inhomogeneous distribution of nanometer scale sp2 clusters and the reduction of the surface emission barrier due to the hydrogen termination.展开更多
We proposed a new way to synthesize a nanocomposite consisted of cementite Fe3C nanoparticles and amorphous carbon by radio frequency plasma-enhanced chemical vapor deposition. Transmission electron microscope images ...We proposed a new way to synthesize a nanocomposite consisted of cementite Fe3C nanoparticles and amorphous carbon by radio frequency plasma-enhanced chemical vapor deposition. Transmission electron microscope images show the existence of nanometric dark grains（Fe3C） embedded in a light matrix（amorphous carbon） in the samples. X-ray photoelectron spectroscopy experiment exhibit that the chemical bonding state in the films corresponded to sp3/sp2 amorphous carbon, sp^3 C-N（287.3 eV） and C15 in Fe3C（283.5 eV）. With increasing deposition time, the ratio of amorphous carbon increased. The magnetic measurements show that the value of in-lane coercivity increased with increasing carbon matrix concentration（from about 6.56× 10^3 A/m for film without carbon structures to approximately 2.77× 10^4 and 5.81 × 10^4 AJm for nanocomposite films at room temperature and 10 K, respectively）. The values of saturation magnetization for the synthesized nanocomposites were lower than that of the bulk Fe3C （ 140 Am^2/kg）.展开更多
Natural graphite is investigated as the cathode for aluminum ion batteries in recent years. However, some drawbacks of the natural graphite such as severe volume swelling shorten its lifetime, In this work, we prepare...Natural graphite is investigated as the cathode for aluminum ion batteries in recent years. However, some drawbacks of the natural graphite such as severe volume swelling shorten its lifetime, In this work, we prepared a composite material by depositing an amorphous carbon on the graphite paper, The composite was used as a cathode to study the electrochemical performance in aluminum ion batteries. The charge/discharge results showed that the composite could exhibit a longer cycle life than the graphite paper, Electrochemical analyses demonstrated that the interface between the amorphous carbon and the graphite paper made a major contribution to the improvement of the cycling stability.展开更多
Natural magnetite formed by the isomorphism substitutions of transition metals,including Fe,Ti,Co,etc.,was activated by mechanical grinding followed by H2 reduction.The temperature-programmed reduction of hydrogen(H2-...Natural magnetite formed by the isomorphism substitutions of transition metals,including Fe,Ti,Co,etc.,was activated by mechanical grinding followed by H2 reduction.The temperature-programmed reduction of hydrogen(H2-TPR)and temperature-programmed surface reaction of carbon dioxide(CO_(2)-TPSR)were carried out to investigate the processes of oxygen loss and CO_(2)reduction.The samples were characterized by X-ray diffraction(XRD),field emission scanning electron microscopy(FE-SEM),and energy-dispersive X-ray spectroscopy(EDS).The results showed that the stability of spinel phases and oxygen-deficient degree significantly increased after natural magnetite was mechanically milled and reduced in H2 atmosphere.Meanwhile,the activity and selectivity of CO_(2)reduction into carbon were enhanced.The deposited carbon on the activated natural magnetite was confirmed as amorphous.The amount of carbon after CO_(2)reduction at 300°C for 90 min over the activated natural magnetite was 2.87wt%higher than that over the natural magnetite.展开更多
The effect of radio-frequency （RF） or low-frequency （LF） bias voltage on the for- mation of amorphous hydrogenated carbon （a-C：H） films was studied on silicon substrates with a low methane （CH4） concentration...The effect of radio-frequency （RF） or low-frequency （LF） bias voltage on the for- mation of amorphous hydrogenated carbon （a-C：H） films was studied on silicon substrates with a low methane （CH4） concentration （2-10 vol.%） in CH4＋Ar mixtures. The bias substrate was applied either by RF （13.56 MHz） or by LF （150 kHz） power supply. The highest hardness values （~18-22 GPa） with lower hydrogen content in the fihns （~20 at.%） deposited at 10 vol.% CH4, was achieved by using the RF bias, However, the films deposited using the LF bias, under similar RF plasma generation power and CH4 concentration （50 W and 10 vol.%, respectively）, displayed lower hardness （~6-12 GPa） with high hydrogen content （~40 at.%）. The structures analyzed by Fourier Transform Infrared （FTIR） and Raman scattering measurements provide an indication of trans-polyacetylene structure formation. However, its excessive formation in the films deposited by the LF bias method is consistent with its higher bonded hydrogen concentration and low level of hardness, as compared to the film prepared by the RF bias method. It was found that the effect of RF bias on the film structure and properties is stronger than the effect of the low-frequency （LF） bias under identical radio-frequency （RF） powered electrode and identical PECVD （plasma enhanced chemical vapor deposition） system configuration.展开更多
The friction and wear properties of amorphous carbon nitride(a-CN x)coatings in water lubrication were reviewed.The influences of mating materials and tribological variables such as normal load(W)and sliding speed(V)o...The friction and wear properties of amorphous carbon nitride(a-CN x)coatings in water lubrication were reviewed.The influences of mating materials and tribological variables such as normal load(W)and sliding speed(V)on the friction and wear properties of the a-CN x coatings were analyzed.It was indicated that the specific wear rate of the a-CN x coatings was related to the hydration reaction of mating materials with water.If the mating materials were easily hydrated,the specific wear rate of a-CN x coatings was low.The water-lubricated properties of the a-CN x coatings were better in comparison to the a-C coatings.The a-CN x/Si-based non-oxide ceramics tribo-pairs exhibited the lowest friction coefficient and wear rate.To describe their friction and wear properties at the normal loads of 3—15Nand the sliding speeds of 0.05—0.5m/s,the wear-mechanism maps for the a-CN x/SiC(Si3N4)tribo-pairs in water were developed.展开更多
The initial field electron emission degradation behaviour of original nano-structured sp^2-bonded amorphous carbon films has been observed, which can be attributed to the increase of the work function of the film in t...The initial field electron emission degradation behaviour of original nano-structured sp^2-bonded amorphous carbon films has been observed, which can be attributed to the increase of the work function of the film in the field emission process analysed using a Fowler-Nordheim plot. The possible reason for the change of work function is suggested to be the desorption of hydrogen from the original hydrogen termination film surface due to field emission current-induced local heating. For the explanation of the emission degradation behaviour of the nano-structured sp2-bonded amorphous carbon film, a cluster model with a series of graphite （0001） basal surfaces has been presented, and the theoretical calculations have been performed to investigate work functions of graphite （0001） surfaces with different hydrogen atom and ion chemisorption sites by using first principles method based on density functional theory-local density approximation.展开更多
Amorphous carbon and graphene co-modified LiFePO4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossb...Amorphous carbon and graphene co-modified LiFePO4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO4was successfully obtained with electron conductive Fe2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g-1 at 10 C rate.展开更多
We demonstrate a facile route for the massive production of SnCb/carbon nanocomposite used as high-capacity anode materials of nextgeneration lithium-ion batteries.The nanocomposite had a unique structure of ultrafine...We demonstrate a facile route for the massive production of SnCb/carbon nanocomposite used as high-capacity anode materials of nextgeneration lithium-ion batteries.The nanocomposite had a unique structure of ultrafine SnO2 nanocrystals（5 nm,80 wt%） homogeneously dispersed in amorphous carbon matrix.This structure design can well accommodate the volume change of Li＋ insertion/desertion in SnO2,and prevent the aggregation of the nanosized active materials during cycling,leading to superior cycle performance with stable reversible capacity of 400 mAh/g at a high current rate of 3.3 A/g.展开更多
Most amorphous carbon(a-C)applications require films with ultra-thin thicknesses;however,the electronic structure and opto-electronic characteristics of such films remain unclear so far.To address this issue,we develo...Most amorphous carbon(a-C)applications require films with ultra-thin thicknesses;however,the electronic structure and opto-electronic characteristics of such films remain unclear so far.To address this issue,we developed a theoretical model based on the density functional theory and molecular dynamic simulations,in order to calculate the electronic structure and opto-electronic characteristics of the ultra-thin a-C films at different densities and temperatures.Temperature was found to have a weak influence over the resulting electronic structure and opto-electronic characteristics,whereas density had a significant influence on these aspects.The volume fraction of sp3 bonding increased with density,whereas that of sp2 bonding initially increased,reached a peak value of 2.52 g/cm^(3),and then decreased rapidly.Moreover,the extinction coefficients of the ultra-thin a-C films were found to be density-sensitive in the long-wavelength regime.This implies that switching the volume ratio of sp2 to sp3 bonding can effectively alter the transmittances of ultra-thin a-C films,and this can serve as a novel approach toward photonic memory applications.Nevertheless,the electrical resistivity of the ultra-thin a-C films appeared independent of temperature.This implicitly indicates that the electrical switching behavior of a-C films previously utilized for non-volatile storage applications is likely due to an electrically induced effect and not a purely thermal consequence.展开更多
Amorphous carbon materials hold great potential for practical use in potassium-ion batteries(PIBs)due to their abundant resources,low cost and high structural stability.However,given the challenge of sluggish potassia...Amorphous carbon materials hold great potential for practical use in potassium-ion batteries(PIBs)due to their abundant resources,low cost and high structural stability.However,given the challenge of sluggish potassiation kinetics,the rate performance of amorphous carbon is severely hindered.Herein,amorphous carbon compounded with graphitic domains(HG-CNTs)was proposed as an advanced anode for PIBs.As directly verified by in situ transmission electron microscopy(TEM),the graphitic domains guarantee fast K-ions transport in the carbon composite at a high current density,while the amorphous carbon shells ensure the structural integrity during potassiation,thus boosting its fast and durable K^(+)storage.As a PlB anode,the HG-CNTs electrode exhibits not only a super-stable long-term cyclability(191.6 mAh g^(-1)at 1 A g^(-1)with almost no capacity decay over 3000 cycles),but also an outstanding rate performance(184.5 mAh g^(-1)at 2 A g^(-1)).Ex situ Raman and TEM results further suggest that the highly reversible structure of HG-CNTs is responsible for its superior electrochemical stability.This work provides helpful insights into the development of carbonaceous electrodes with both high rate capability and long cycle life for PIBs.展开更多
A versatile hydrothermal strategy for the growth of a centimeter-sized CaO/amorphous carbon rope was introduced in this article. It is demonstrated that the centimeter-sized rope is composed of abundant amorphous carb...A versatile hydrothermal strategy for the growth of a centimeter-sized CaO/amorphous carbon rope was introduced in this article. It is demonstrated that the centimeter-sized rope is composed of abundant amorphous carbon ＂belt＂ and ＂stick＂ with small polygonal CaO particles in the size of 3.0-5.0 nm embedded in the ＂belt＂ and ＂stick＂ framework. With the increase in NaOH amount, polygonal Ca（OH）2 particles in the size of 0.5-3.0 μm are found, instead of the CaO/amorphous carbon rope. This morphology evolution results from the competition of structure-directing and hydrothermal-carbonizing of organic agents during hydrothermal reaction. These results may give good suggestions for the controllable growth of newly unique morphological micro/nano architectures in solution phase reactions.展开更多
Amorphous carbon nanoparticles （a-CNPs） on a multi-walled carbon nanotube （MWCNT） film, deposited on a silicon substrate, were synthesized using an electrodeposition combination from a methanol suspension of polyd...Amorphous carbon nanoparticles （a-CNPs） on a multi-walled carbon nanotube （MWCNT） film, deposited on a silicon substrate, were synthesized using an electrodeposition combination from a methanol suspension of polydiallyldimethylammonium chloride-modified MWCNTs. A low-voltage electropho- retic deposition of the MWCNTs and a high-voltage electrochemical deposition of the a-CNPs were carried out to yield homogenously attached a-CNPs on the surfaces of the MWCNTs, and form a composite film with good adhesion to the substrate. This scalable technology can produce a large area of a-CNP/MWCNT film. And the field emission investigations show that the a-CNP/MWCNT film has turn- on electric field of 3.17 V μm- 1 （at 10 μA cm-2） and threshold field of 4.62 V μm-1 （at 1 mA cm-2）, which are lower than those of the MWCNT film. The a-CNP/MWCNT film can be deposited simply with large areas and may be a promising cathode material applied in field emission displays.展开更多
For electromagnetic wave-absorbing materials,maximizing absorption at a specific frequency has been constantly achieved,but enhancing the absorption properties in the entire band remains a challenge.In this work,a 3D ...For electromagnetic wave-absorbing materials,maximizing absorption at a specific frequency has been constantly achieved,but enhancing the absorption properties in the entire band remains a challenge.In this work,a 3D porous pyrolytic carbon(PyC)foam matrix was synthesized by a template method.Amorphous carbon nanotubes(CNTs)were then in-situ grown on the matrix surface to obtain ultralight CNTs/Py C foam.These in-situ grown amorphous CNTs were distributed uniformly and controlled by the catalytic growth time and can enhance the interface polarization and conduction loss of composites.When the electromagnetic wave enters the internal holes,the electromagnetic energy can be completely attenuated under the combined action of polarization,conductivity loss,and multiple reflections.The ultralight CNTs/Py C foam had a density of 22.0 mg·cm^(-3)and a reflection coefficient lower than-13.3 d B in the whole X-band(8.2-12.4 GHz),which is better than the conventional standard of effective absorption bandwidth(≤-10 dB).The results provide ideas for researching ultralight and strong electromagnetic wave absorbing materials in the X-band.展开更多
基金mainly supported by the Natural Science Foundation of China (Grant Nos. 52288102, 52090020, and 52372261)the Natural Science Foundation of Hebei Province (Grant No. E202403045)+1 种基金the S&T Program of Hebei (Grant No. 225A1102D)the Ministry of Education Chang Jiang Scholar Professor Program (Grant No. T2022241)
文摘Recent advances in geoscience have underscored the critical role of abiogenic processes in petroleum formation,especially the formation and polymerization of methane.However,whether a direct carbon-H_(2) reaction can produce C_(2+)hydrocarbons(e.g.,ethane and propane)beyond methane remains an open question.Here,we demonstrate the direct synthesis of ethane and propane via reactions between amorphous carbon and H_(2) under upper mantle conditions(2-10 GPa and 800-1200℃).A systematic investigation reveals that increasing structural disorder in carbon precursors,from graphite to glassy carbon-Ⅱ and carbon black,enhances the production of C_(2)-C_(3) hydrocarbons.Through integrated X-ray diffraction and reverse Monte Carlo simulations,we establish that the continuous random atomic network structures in amorphous carbon enable one-step synthesis of heavy hydrocarbons with H_(2).These models establish a direct link between atomic-scale carbon structures and the one-step synthesis of C_(2+) hydrocarbons under H_(2)-rich,high-pressure,and high-temperature conditions—potentially revealing an efficient mechanism for the abiotic production of C_(2+) hydrocarbons in the upper mantle.
基金Major Science and technology projects of Anhui Province (202103a05020003)。
文摘[Background and purposes]Proton exchange membrane fuel cells(PEMFCs),which convert hydrogen energy directly into electrical energy and water,have received overwhelming attention,owing to their potential to significantly reduce energy consumption,pollution emissions and reliance on fossil fuels.Bipolar plates are the major part and key component of PEMFCs stack,which provide mechanical strength,collect and conduct current segregate oxidants and reduce agents.They contribute 70-80%weight and 20-30%cost of a whole stack,while significantly affecting the power density.There are three types plates,including metal bipolar plate,graphite bipolar plate and composite bipolar plate.Stainless steel bipolar plates,as one of metal bipolar plate,exhibit promising manufacturability,competitive cost and durability among various metal materials.However,stainless steel would be corroded in the harsh acid(pH 2-5)and humid PEMFCs environment,whereas the leached ions will contaminate the membrane.In addition,the passivated film formed on the surface will increase the interfacial contact resistance(ICR).In order to improve the corrosion resistance and electrical conductivity of steel bipolar plates,surface coatings are essential.Metal nitride coatings,metal carbide coatings,polymer coatings and carbon-based coatings have been introduced in recent years.Carbon-based coatings,mainly including a-C(amorphous Carbon),Ta-C(Tetrahedral amorphous carbon)and DLC(diamond-like carbon),have attracted considerable attention from both academia and industry,owing to their superior performance,such as chemical inertness,mechanical hardness and electrical conductivity.However,Ta-C films as protective coating of PEMFCs have been rarely reported,due to the difficulty in production for industrial application.In this paper,multi-layer Ta-C composite films were produced by using customized industrial-scale vacuum equipment to address those issues.[Methods]Multiple layered Ta-C coatings were prepared by using PIS624 equipment,which assembled filtered cathodic arc evaporation,ion beam and magnetron sputtering into one equipment,while SS304 and silicon specimens were used as substrate for testing and analysis.Adhesion layer and intermediate layer were deposited by using magnetron sputtering at deposition temperature of 150℃and pressure of 3×10^(−1) Pa,while the sputtering current was set to be 5 A and bias power to be 300 V.The Ta-C layer was coated at arc current of 80-100 A,bias voltage of 1500 V and gas flow of 75 sccm.A scanning electron microscope(CIQTEK SEM3200)was used to characterize surface morphology,coating structure and cross-section profile of the coatings.Raman spectrometer(LabRam HR Evolution,HORIBA JOBIN YVON)was used to identify the bonding valence states.Electrochemical tests were performed by using an electrochemical work station(CHI760,Shanghai Chenhua Instrument Co.,Ltd.),with the traditional three electrode system,where saturated Ag/AgCl and platinum mesh were used as the reference electrode and counter electrode,respectively.All samples were mounted in plastic tube and sealed with epoxy resin,with an exposure area of 2.25 cm^(2),serving as the working electrode.Electrochemical measurements were carried out in simulated PEMFCs cathode environment in 0.5 mol·L^(−1) H_(2)SO_(4)+5 ppm F−solution,at operating temperature of 70℃.As the cathode environment was harsher than the anode environment,all the samples are stabilized at the open-circuit potential(OCP)for approximately 30 min before the EIS measurements.ICR between bipolar plates and GDL was a key parameter affecting performance of the PEMFCs stack.The test sample sandwiched between 2 pieces of carbon paper(simulate gas diffusion layer,GDL)was placed between 2 gold-plated copper electrodes at a compaction pressure of 1.4 MPa,which was considered to be the conventional compaction pressure in the PEMFCs.Under the same conditions,the resistance of a single carbon paper was measured as well.The ICR was calculated according to the formula ICR=1/2(R2−R1)×S,where S was the contact area between GDL and coated stainless steel BPPs.All data of ICR were measured three times for averaging.[Results]The coatings deposited by filtered cathodic arc technology were compact and smooth,which reduced coating porosity and favorable to corrosion resistance.The coating thickness of adhesion and intermediate layers were 180 nm,while the protective Ta-C coating thickness was about 300 nm,forming multiple coating to provide stronger protection for metal bipolar plates.Cr,Ti,Nb and Ta coatings were selected as adhesion layers for comparison.According to electrochemical test,Ta and Nb coatings have higher corrosion resistance.However,Ta and Nb materials would be costly when they are used for mass production.Relatively,Cr and Ti materials were cost effective.Hence,a comprehensive assessment was indispensable to decide the materials to be selected as adhesion layer.Ta-TiN and Ti-TiN combined adhesion and intermediate layer exhibited stronger corrosion resistance,with the corrosion current to be less than 10^(−6) A·cm^(−2).Ta-C protective coating deposited by using filtered cathodic arc technology indicated displayed higher corrosion resistance,with the average corrosion density to be about 1.26×10^(−7) A·cm^(−2).Ta-C coating also shown larger contact angle,with the highest hydrophobicity,which was one of the important advantages for Ta-C,in terms of corrosion resistance.According to Raman spectroscopy,the I(D)/I(G)=549.8/1126.7=0.487,with the estimated fraction of sp^(3) bonding to be in the range of 5154%.The intermediate layer TiN has higher conductivity than the CrN layer.Considering cost,corrosion performance and ICR result,the Ti-TiN layer combination is recommended for industrial scale application.[Conclusions]Multiple layer coating structure of Ta-C film had stronger corrosion resistance;with more than 50%sp^(3) content,while it also had larger water contact angle and higher corrosion resistance than DLC film.The filtered arcing deposition technology was able to make the film to be more consistent and stable than normal arcing technology in terms of the preparation of Ta-C.The coating displayed corrosion density of 1.26×10^(−7) A·cm^(−2) and ICR of less than 5 mΩ·cm^(2),far beyond technical target of 2025 DOE(US Department of Energy).This indicated that the mass-production scale coating technology for PEMFC bipolar plates is highly possible.
文摘Carbon nanotubes(CNTs)reinforced copper(CNTs/Cu)is one of the most promising and extensively researched materials for replacing traditional Cu-based materials in high-load and high-current applications,particularly within the aerospace industry.Amorphous carbon nanotubes(aCNTs)are a type of carbon nanotubes characterized by the presence of mesopores distributed across their amorphous sidewalls,facilitating connectivity between the hollow core and the external environment.Therefore,we propose utilizing aCNTs as a reinforcing agent for Cu.The mesoporous structure of aCNTs facilitates the interpenetration of Cu into the aCNTs,thereby maintaining the continuity of the matrix properties.Experimental results demonstrate that Cu effectively penetrates the mesoporous sidewalls of aCNTs.Both pure Cu and aCNTs-reinforced Cu exhibit comparable electrical conductivity,while the hardness of the aCNTs/Cu composite is significantly enhanced.Additionally,both the density and porosity of aCNTs/Cu are lower than those of pure Cu,and the introduction of aCNTs helps to reduce the sintering temperature.
文摘A mixture of amorphous carbon and carbon nanotubes films was synthesized on stainless steel plates by a micro- wave plasma enhanced chemical vapor deposition system. The source gases were hydrogen and methane with flow rates of 100 and 16sccm,respectively,with a total pressure of 5.0kPa. The surface morphology and the structure of the films were characterized by field emission scanning electron microscopy （SEM） and Raman scattering spectroscopy. Field emission properties of as-deposited film were measured in a vacuum room below 5 ×10^ 5 Pa. The experimental results show that the initial turn-on field is 0. 9V/μm; The current density is 4.0mA/cm2 and the emission sites are dense and uniform at an electric field of 3.7V/μm. These results indicate that such a mixture of amorphous carbon and carbon nanotubes films is a promising material for field emission applications.
文摘Direct current metal filtered cathodic vacuum arc （FCVA） and acetylene gas （C2H2） were wielded to synthesize Ti-containing amorphous carbon films on Si （100）. The influence of substrate bias voltage and acetylene gas on the microstructure and mechanical properties of the films were investigated. The results show that the phase of TiC in the （111） preferential crystallographic orientation exists in the film,and the main existing pattern of carbon is sp2. With increasing the acetylene flow rate,the contents of Ti and TiC phase of the film gradually reduce; however,the thickness of the film increases. When the substrate bias voltage reaches -600 V,the internal stress of the film reaches 1.6 GPa. The micro-hardness and elastic modulus of the film can reach 33.9 and 237.6 GPa,respectively,and the friction coefficient of the film is 0.25.
基金Supported by Program for the National Natural Science Foundation of China (Nos. 51577021 and U1704253)the Fundamental Research Funds for the Central Universities (DUT17GF107)
文摘Crystalline Fe/MnO@C core–shell nanocapsules inlaid in porous amorphous carbon matrix(FMCA)was synthesized successfully with a novel confinement strategy.The heterogeneous Fe/MnO nanocrystals are with approximate single-domain size which gives rise to natural resonance in 2–18 GHz.The addition of MnO2 confines degree of graphitization catalyzed by iron and contributes to the formation of amorphous carbon.The heterogeneous materials composed of crystalline–amorphous structures disperse evenly and its density is significantly reduced on account of porous properties.Meanwhile,adjustable dielectric loss is achieved by interrupting Fe core aggregation and stacking graphene conductive network.The dielectric loss synergistically with magnetic loss endows the FMCA enhanced absorption.The optimal reflection loss(RL)is up to−45 dB,and the effective bandwidth(RL<−10 dB)is 5.0 GHz with 2.0 mm thickness.The proposed confinement strategy not only lays the foundation for designing high-performance microwave absorber,but also offers a general duty synthesis method for heterogeneous crystalline–amorphous composites with tunable composition in other fields.
基金supported by the NSFof China(59802004)Jiangsu Province,China(BK99047)+1 种基金RGC of Hongkong(No.CUHK 4173/98E)support of Groucher Foundation of Hong Kong
文摘Hydrogenated amorphous carbon films were fabricated by using layer-by-layer deposition method and hydrogen dilution method in a small d.c.-assisted plasma enhanced chemical vapor deposition system. It was found that the hydrogen plasma treatment could change the sp2/sp3 ratio to some extent by chemical etching. The improvements of field emission characteristics were observed compared with that from conventionally deposited a-C films, which can be attributed to the large field enhancement effect due to the inhomogeneous distribution of nanometer scale sp2 clusters and the reduction of the surface emission barrier due to the hydrogen termination.
基金Supported by the National Natural Science Foundation of China(No.50832001)the Science and Technology Develop-ment Program of Jilin Province, China(No.20070501)
文摘We proposed a new way to synthesize a nanocomposite consisted of cementite Fe3C nanoparticles and amorphous carbon by radio frequency plasma-enhanced chemical vapor deposition. Transmission electron microscope images show the existence of nanometric dark grains（Fe3C） embedded in a light matrix（amorphous carbon） in the samples. X-ray photoelectron spectroscopy experiment exhibit that the chemical bonding state in the films corresponded to sp3/sp2 amorphous carbon, sp^3 C-N（287.3 eV） and C15 in Fe3C（283.5 eV）. With increasing deposition time, the ratio of amorphous carbon increased. The magnetic measurements show that the value of in-lane coercivity increased with increasing carbon matrix concentration（from about 6.56× 10^3 A/m for film without carbon structures to approximately 2.77× 10^4 and 5.81 × 10^4 AJm for nanocomposite films at room temperature and 10 K, respectively）. The values of saturation magnetization for the synthesized nanocomposites were lower than that of the bulk Fe3C （ 140 Am^2/kg）.
文摘Natural graphite is investigated as the cathode for aluminum ion batteries in recent years. However, some drawbacks of the natural graphite such as severe volume swelling shorten its lifetime, In this work, we prepared a composite material by depositing an amorphous carbon on the graphite paper, The composite was used as a cathode to study the electrochemical performance in aluminum ion batteries. The charge/discharge results showed that the composite could exhibit a longer cycle life than the graphite paper, Electrochemical analyses demonstrated that the interface between the amorphous carbon and the graphite paper made a major contribution to the improvement of the cycling stability.
基金supported by the National Key Research and Development Program of China(No.2016YFB 0600904).The authors gratefully acknowledge the support of the Analytical and Test Center of Sichuan University.
文摘Natural magnetite formed by the isomorphism substitutions of transition metals,including Fe,Ti,Co,etc.,was activated by mechanical grinding followed by H2 reduction.The temperature-programmed reduction of hydrogen(H2-TPR)and temperature-programmed surface reaction of carbon dioxide(CO_(2)-TPSR)were carried out to investigate the processes of oxygen loss and CO_(2)reduction.The samples were characterized by X-ray diffraction(XRD),field emission scanning electron microscopy(FE-SEM),and energy-dispersive X-ray spectroscopy(EDS).The results showed that the stability of spinel phases and oxygen-deficient degree significantly increased after natural magnetite was mechanically milled and reduced in H2 atmosphere.Meanwhile,the activity and selectivity of CO_(2)reduction into carbon were enhanced.The deposited carbon on the activated natural magnetite was confirmed as amorphous.The amount of carbon after CO_(2)reduction at 300°C for 90 min over the activated natural magnetite was 2.87wt%higher than that over the natural magnetite.
基金supported by a grant from the Israel Atomic Energy Commission for international collaborations
文摘The effect of radio-frequency （RF） or low-frequency （LF） bias voltage on the for- mation of amorphous hydrogenated carbon （a-C：H） films was studied on silicon substrates with a low methane （CH4） concentration （2-10 vol.%） in CH4＋Ar mixtures. The bias substrate was applied either by RF （13.56 MHz） or by LF （150 kHz） power supply. The highest hardness values （~18-22 GPa） with lower hydrogen content in the fihns （~20 at.%） deposited at 10 vol.% CH4, was achieved by using the RF bias, However, the films deposited using the LF bias, under similar RF plasma generation power and CH4 concentration （50 W and 10 vol.%, respectively）, displayed lower hardness （~6-12 GPa） with high hydrogen content （~40 at.%）. The structures analyzed by Fourier Transform Infrared （FTIR） and Raman scattering measurements provide an indication of trans-polyacetylene structure formation. However, its excessive formation in the films deposited by the LF bias method is consistent with its higher bonded hydrogen concentration and low level of hardness, as compared to the film prepared by the RF bias method. It was found that the effect of RF bias on the film structure and properties is stronger than the effect of the low-frequency （LF） bias under identical radio-frequency （RF） powered electrode and identical PECVD （plasma enhanced chemical vapor deposition） system configuration.
基金Supported by the National Natural Science Foundation of China(50675102,50975137,51375231)the Program for New Century Excellent Talents in University(NCET-10-068)+2 种基金the Research Fund for the Doctoral Program of Higher Education(20133218110030)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)Japan Society for the Promotion of Science under Grant-in-Aid for Scientific Research(JSPS Fellows P03219)
文摘The friction and wear properties of amorphous carbon nitride(a-CN x)coatings in water lubrication were reviewed.The influences of mating materials and tribological variables such as normal load(W)and sliding speed(V)on the friction and wear properties of the a-CN x coatings were analyzed.It was indicated that the specific wear rate of the a-CN x coatings was related to the hydration reaction of mating materials with water.If the mating materials were easily hydrated,the specific wear rate of a-CN x coatings was low.The water-lubricated properties of the a-CN x coatings were better in comparison to the a-C coatings.The a-CN x/Si-based non-oxide ceramics tribo-pairs exhibited the lowest friction coefficient and wear rate.To describe their friction and wear properties at the normal loads of 3—15Nand the sliding speeds of 0.05—0.5m/s,the wear-mechanism maps for the a-CN x/SiC(Si3N4)tribo-pairs in water were developed.
文摘The initial field electron emission degradation behaviour of original nano-structured sp^2-bonded amorphous carbon films has been observed, which can be attributed to the increase of the work function of the film in the field emission process analysed using a Fowler-Nordheim plot. The possible reason for the change of work function is suggested to be the desorption of hydrogen from the original hydrogen termination film surface due to field emission current-induced local heating. For the explanation of the emission degradation behaviour of the nano-structured sp2-bonded amorphous carbon film, a cluster model with a series of graphite （0001） basal surfaces has been presented, and the theoretical calculations have been performed to investigate work functions of graphite （0001） surfaces with different hydrogen atom and ion chemisorption sites by using first principles method based on density functional theory-local density approximation.
基金supported by the National Science Foundation for Distinguished Young Scholars of China(No.51025209)the National Nature Science Foundation of China(No.21103089)the Key Projects in Nature Science Foundation of Jiangsu Province(No.BK2011030)
文摘Amorphous carbon and graphene co-modified LiFePO4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO4was successfully obtained with electron conductive Fe2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g-1 at 10 C rate.
基金supported by the National Science Foundation of China(Grant No.51201065 and No.51231003)the Natural Science Foundation of Guangdong Province(S2012040008050)the Doctorate Foundation of Ministry of Education(Grant No.20120172120007 and No.2014ZZ0002)
文摘We demonstrate a facile route for the massive production of SnCb/carbon nanocomposite used as high-capacity anode materials of nextgeneration lithium-ion batteries.The nanocomposite had a unique structure of ultrafine SnO2 nanocrystals（5 nm,80 wt%） homogeneously dispersed in amorphous carbon matrix.This structure design can well accommodate the volume change of Li＋ insertion/desertion in SnO2,and prevent the aggregation of the nanosized active materials during cycling,leading to superior cycle performance with stable reversible capacity of 400 mAh/g at a high current rate of 3.3 A/g.
基金the NUPTSF(Grant Nos.NY220078,NY217116,and NY220112)the Science Foundation of Jiangsu Province,China(Grant Nos.BK20211273 and BZ2021031)+7 种基金the Dual Innovative Doctor of Jiangsu Province,China(Grant No.JSSCBS20210522)the Institution of Jiangsu Province,China(Grant No.20KJB510014)the National and Local Joint Engineering Laboratory of RF and Micro-assembly(Grant No.KFJJ20200203)the Industry Program of Huzhou City(Grant No.2020GG03)the Distinguished Professor Grant of Jiangsu Province,China(Grant No.RK106STP18003)the Jiangsu Province Research Foundation,China(Grant Nos.NLXZYZZ219001 and SZDG2020009)the National Natural Science Foundation of China(Grant No.61964012)the Foundation of Jiangxi Science and Technology Department,China(Grant No.20202ACBL212001).
文摘Most amorphous carbon(a-C)applications require films with ultra-thin thicknesses;however,the electronic structure and opto-electronic characteristics of such films remain unclear so far.To address this issue,we developed a theoretical model based on the density functional theory and molecular dynamic simulations,in order to calculate the electronic structure and opto-electronic characteristics of the ultra-thin a-C films at different densities and temperatures.Temperature was found to have a weak influence over the resulting electronic structure and opto-electronic characteristics,whereas density had a significant influence on these aspects.The volume fraction of sp3 bonding increased with density,whereas that of sp2 bonding initially increased,reached a peak value of 2.52 g/cm^(3),and then decreased rapidly.Moreover,the extinction coefficients of the ultra-thin a-C films were found to be density-sensitive in the long-wavelength regime.This implies that switching the volume ratio of sp2 to sp3 bonding can effectively alter the transmittances of ultra-thin a-C films,and this can serve as a novel approach toward photonic memory applications.Nevertheless,the electrical resistivity of the ultra-thin a-C films appeared independent of temperature.This implicitly indicates that the electrical switching behavior of a-C films previously utilized for non-volatile storage applications is likely due to an electrically induced effect and not a purely thermal consequence.
基金financially supported by the National Natural Science Foundation of China(52172240)the Fundamental Research Funds for the Central Universities(20720200075)the National Program for Thousand Young Talents of China,and the“Double-First Class”Foundation of Materials and Intelligent Manufacturing Discipline of Xiamen University。
文摘Amorphous carbon materials hold great potential for practical use in potassium-ion batteries(PIBs)due to their abundant resources,low cost and high structural stability.However,given the challenge of sluggish potassiation kinetics,the rate performance of amorphous carbon is severely hindered.Herein,amorphous carbon compounded with graphitic domains(HG-CNTs)was proposed as an advanced anode for PIBs.As directly verified by in situ transmission electron microscopy(TEM),the graphitic domains guarantee fast K-ions transport in the carbon composite at a high current density,while the amorphous carbon shells ensure the structural integrity during potassiation,thus boosting its fast and durable K^(+)storage.As a PlB anode,the HG-CNTs electrode exhibits not only a super-stable long-term cyclability(191.6 mAh g^(-1)at 1 A g^(-1)with almost no capacity decay over 3000 cycles),but also an outstanding rate performance(184.5 mAh g^(-1)at 2 A g^(-1)).Ex situ Raman and TEM results further suggest that the highly reversible structure of HG-CNTs is responsible for its superior electrochemical stability.This work provides helpful insights into the development of carbonaceous electrodes with both high rate capability and long cycle life for PIBs.
文摘A versatile hydrothermal strategy for the growth of a centimeter-sized CaO/amorphous carbon rope was introduced in this article. It is demonstrated that the centimeter-sized rope is composed of abundant amorphous carbon ＂belt＂ and ＂stick＂ with small polygonal CaO particles in the size of 3.0-5.0 nm embedded in the ＂belt＂ and ＂stick＂ framework. With the increase in NaOH amount, polygonal Ca（OH）2 particles in the size of 0.5-3.0 μm are found, instead of the CaO/amorphous carbon rope. This morphology evolution results from the competition of structure-directing and hydrothermal-carbonizing of organic agents during hydrothermal reaction. These results may give good suggestions for the controllable growth of newly unique morphological micro/nano architectures in solution phase reactions.
基金support from the Top Hundred Talents Program of Chinese Academy of Sciencesthe National Nature Science Foundation of China(No.51002161)
文摘Amorphous carbon nanoparticles （a-CNPs） on a multi-walled carbon nanotube （MWCNT） film, deposited on a silicon substrate, were synthesized using an electrodeposition combination from a methanol suspension of polydiallyldimethylammonium chloride-modified MWCNTs. A low-voltage electropho- retic deposition of the MWCNTs and a high-voltage electrochemical deposition of the a-CNPs were carried out to yield homogenously attached a-CNPs on the surfaces of the MWCNTs, and form a composite film with good adhesion to the substrate. This scalable technology can produce a large area of a-CNP/MWCNT film. And the field emission investigations show that the a-CNP/MWCNT film has turn- on electric field of 3.17 V μm- 1 （at 10 μA cm-2） and threshold field of 4.62 V μm-1 （at 1 mA cm-2）, which are lower than those of the MWCNT film. The a-CNP/MWCNT film can be deposited simply with large areas and may be a promising cathode material applied in field emission displays.
基金supported by the National Natural Science Foundation of China(No.51702197)Creative Research Foundation of the Science and Technology on Thermostructural Composite Materials Laboratory,the Natural Science Foundation of Shaanxi Province(No.2022JM248)the Doctoral Scientific Research Foundation of Shaanxi University of Science&Technology(No.BJ16-06)。
文摘For electromagnetic wave-absorbing materials,maximizing absorption at a specific frequency has been constantly achieved,but enhancing the absorption properties in the entire band remains a challenge.In this work,a 3D porous pyrolytic carbon(PyC)foam matrix was synthesized by a template method.Amorphous carbon nanotubes(CNTs)were then in-situ grown on the matrix surface to obtain ultralight CNTs/Py C foam.These in-situ grown amorphous CNTs were distributed uniformly and controlled by the catalytic growth time and can enhance the interface polarization and conduction loss of composites.When the electromagnetic wave enters the internal holes,the electromagnetic energy can be completely attenuated under the combined action of polarization,conductivity loss,and multiple reflections.The ultralight CNTs/Py C foam had a density of 22.0 mg·cm^(-3)and a reflection coefficient lower than-13.3 d B in the whole X-band(8.2-12.4 GHz),which is better than the conventional standard of effective absorption bandwidth(≤-10 dB).The results provide ideas for researching ultralight and strong electromagnetic wave absorbing materials in the X-band.
