The refining effect of Al3Ti1B1RE master alloy on Al sheets used for pressure can manufacture and the behavior of mixed rare earths in master alloy were investigated with XRD, OM, SEM and EDAX. It is found that the r...The refining effect of Al3Ti1B1RE master alloy on Al sheets used for pressure can manufacture and the behavior of mixed rare earths in master alloy were investigated with XRD, OM, SEM and EDAX. It is found that the refining effect of the refiner on the material has superiority over foreign or domestic Al5Ti1B refiner, and the refiner still retains its refining ability for 6 h after adding it to molten Al, thus improving the strength and plasticity of the material remarkably. The excellent refining effect and stability of AlTiBRE refiner result from that RE can lower the surface energy of molten Al and improve the wetting characteristics of molten Al on refinement nuclei such as TiAl 3, TiB 2, etc., thus giving full play to the effect of heterogeneous nucleation and impeding the congregating tendency of TiB 2 phase in molten Al. At the same time, RE gathering in front of solid/liquid interface are also easy to cause composition supercooling in molten Al, thus impeding the growth of α Al grains and promoting α Al nucleation on refinement nuclei. In addition, RE also play certain role in purification and grain refinement, or modification, especially their effect of purification can improve the metallurgical quality of AlTiBRE master alloy.展开更多
An Al-based composite reinforced with core–shell-structured Ti/Al_3Ti was fabricated through a powder metallurgy route followed by hot extrusion and was found to exhibit promising mechanical properties. The ultimate ...An Al-based composite reinforced with core–shell-structured Ti/Al_3Ti was fabricated through a powder metallurgy route followed by hot extrusion and was found to exhibit promising mechanical properties. The ultimate tensile strength and elongation of the composite sintered at 620°C for 5 h and extruded at a mass ratio of 12.75:1 reached 304 MPa and 14%, respectively, and its compressive deformation reached 60%. The promising mechanical properties are due to the core–shell-structured reinforcement, which is mainly composed of Al_3Ti and Ti and is bonded strongly with the Al matrix, and to the reduced crack sensitivity of Al_3Ti. The refined grains after hot extrusion also contribute to the mechanical properties of this composite. The mechanical properties might be further improved through regulating the relative thickness of Al–Ti intermetallics and Ti metal layers by adjusting the sintering time and the subsequent extrusion process.展开更多
Under various electromagnetic induction heating powers,different Al3Ti/Al composites were fabricated by in-situ synthesis method from aluminum and titanium fibers.Microstructures and particles distribution of the comp...Under various electromagnetic induction heating powers,different Al3Ti/Al composites were fabricated by in-situ synthesis method from aluminum and titanium fibers.Microstructures and particles distribution of the composites were examined by XRD,SEM and EDS.The results show that no other intermetallic compounds beside Al3Ti can be in-situ synthesized.Around the titanium fibers,the reaction zones and diffusion zones can be obviously found.Due to the stirring of the electromagnetic function,the formation of the micro-cracks inside the reaction zone was conducive to the peeling off of the Al3Ti particles,and ensures the continuous reaction between liquid aluminum and titanium fibers,as well as the diffusion of Al3Ti particles.At the same time,there were secondary splits of Al3Ti particles located in diffusion zones.Two-body abrasion test shows that with the increase of induction heating power,the wear rates of the composites reduced and the number of grooves decreased.展开更多
文摘The refining effect of Al3Ti1B1RE master alloy on Al sheets used for pressure can manufacture and the behavior of mixed rare earths in master alloy were investigated with XRD, OM, SEM and EDAX. It is found that the refining effect of the refiner on the material has superiority over foreign or domestic Al5Ti1B refiner, and the refiner still retains its refining ability for 6 h after adding it to molten Al, thus improving the strength and plasticity of the material remarkably. The excellent refining effect and stability of AlTiBRE refiner result from that RE can lower the surface energy of molten Al and improve the wetting characteristics of molten Al on refinement nuclei such as TiAl 3, TiB 2, etc., thus giving full play to the effect of heterogeneous nucleation and impeding the congregating tendency of TiB 2 phase in molten Al. At the same time, RE gathering in front of solid/liquid interface are also easy to cause composition supercooling in molten Al, thus impeding the growth of α Al grains and promoting α Al nucleation on refinement nuclei. In addition, RE also play certain role in purification and grain refinement, or modification, especially their effect of purification can improve the metallurgical quality of AlTiBRE master alloy.
基金financially supported by the Science and Technology Plan Item of Liaoning Province (No.201601174)the National Natural Science Foundation of China (No.51371121)
文摘An Al-based composite reinforced with core–shell-structured Ti/Al_3Ti was fabricated through a powder metallurgy route followed by hot extrusion and was found to exhibit promising mechanical properties. The ultimate tensile strength and elongation of the composite sintered at 620°C for 5 h and extruded at a mass ratio of 12.75:1 reached 304 MPa and 14%, respectively, and its compressive deformation reached 60%. The promising mechanical properties are due to the core–shell-structured reinforcement, which is mainly composed of Al_3Ti and Ti and is bonded strongly with the Al matrix, and to the reduced crack sensitivity of Al_3Ti. The refined grains after hot extrusion also contribute to the mechanical properties of this composite. The mechanical properties might be further improved through regulating the relative thickness of Al–Ti intermetallics and Ti metal layers by adjusting the sintering time and the subsequent extrusion process.
基金Project(2015DFR50990-01)supported by International Cooperation Project of Ministry of Science and Technology of ChinaProjects(18JS060,18JS075)supported by the Shaanxi Key Laboratory of Nano-materials and Technology,China。
文摘Under various electromagnetic induction heating powers,different Al3Ti/Al composites were fabricated by in-situ synthesis method from aluminum and titanium fibers.Microstructures and particles distribution of the composites were examined by XRD,SEM and EDS.The results show that no other intermetallic compounds beside Al3Ti can be in-situ synthesized.Around the titanium fibers,the reaction zones and diffusion zones can be obviously found.Due to the stirring of the electromagnetic function,the formation of the micro-cracks inside the reaction zone was conducive to the peeling off of the Al3Ti particles,and ensures the continuous reaction between liquid aluminum and titanium fibers,as well as the diffusion of Al3Ti particles.At the same time,there were secondary splits of Al3Ti particles located in diffusion zones.Two-body abrasion test shows that with the increase of induction heating power,the wear rates of the composites reduced and the number of grooves decreased.
