V2O5/WO3‐TiO2 and V2O5/WO3‐TiO2‐SiO2 catalysts were prepared by a wetness impregnation method, and both the catalysts were hydrothermally aged at 750℃ in 10 vol%H2O/air for 24 h. The catalysts were evaluated for N...V2O5/WO3‐TiO2 and V2O5/WO3‐TiO2‐SiO2 catalysts were prepared by a wetness impregnation method, and both the catalysts were hydrothermally aged at 750℃ in 10 vol%H2O/air for 24 h. The catalysts were evaluated for NOx conversion using NH3 as the reductant. Hydrothermal ageing decreased the NOx conversion of V2O5/WO3‐TiO2 catalyst severely over the entire measured tem‐perature range. Interestingly, the NH3‐SCR activity of the silica‐modified catalyst at 220–480℃ is enhanced after ageing. The catalysts were characterized by X‐ray diffraction, nitrogen adsorption, X‐ray fluorescence, Raman spectroscopy, H2 temperature‐programmed reduction, and NH3 temper‐ature‐programmed desorption. The addition of silica inhibited the phase transition from anatase to rutile titania, growth of TiO2 crystallite size and shrinkage of catalyst surface area. Consequently, the vanadia species remained highly dispersed and the hydrothermal stability of the V2O5/WO3‐TiO2 catalyst was significantly improved.展开更多
A versatile wet impregnation method was employed to conveniently and controllably deposit Fe_2O_3 nanoparticles on zeolites including commercial Y, mordenite and ZSM-5 with the similar framework Si/Al ratios and cryst...A versatile wet impregnation method was employed to conveniently and controllably deposit Fe_2O_3 nanoparticles on zeolites including commercial Y, mordenite and ZSM-5 with the similar framework Si/Al ratios and crystal sizes, respectively. The ultrafine Fe_2O_3 nanoparticles in size of 5 nm can be highly dispersed on zeolite Y matrix due to its much better wettability than ZSM-5 and mordenite. By using the obtained Fe_2O_3/zeolite composite as the heterogeneous Fenton-like catalysts, the degradation of phenol as a model reaction was systematically investigated, including the zeolite supports, particle size and dispersion of Fe_2O_3, and reaction conditions of H_2O_2 concentration, temperature, and pH value. The catalyst based on zeolite Y with Fe loading of 9% exhibited the best phenol degradation efficiency (> 90%)in neutral pH within 2 h. Its high catalytic activity in Fenton reaction can be attributed to the bifunctional properties of strong surface BrФnsted acidity and high reactivity of octahedral Fe^(3+) in the highlydispersed ultrafine Fe_2O_3 nanoparticles in size of 5 nm, which were the primary active centers to quickly decompose H_2O_2 into hydroxyl radicals. Since phenol degradation can be performed under mild conditions of ambient temperature (283-323 K) and a wide pH range (4.0-7.0), the catalysts can be easily recovered for recyclable use with stable degradation activity, which own the immense potential in deep treatment of organic pollutants in industrial wastewater.展开更多
Mesoporous superacids S2O82–-Fe2O3/SBA-15(SFS)with active nanoparticles are prepared by ultrasonic adsorption method.This method is adopted to ensure a homo-dispersed nanoparticle active phase,large specific surface ...Mesoporous superacids S2O82–-Fe2O3/SBA-15(SFS)with active nanoparticles are prepared by ultrasonic adsorption method.This method is adopted to ensure a homo-dispersed nanoparticle active phase,large specific surface area and many acidic sites.Compared with bulk S2O82–-Fe2O3,Br?nsted acid catalysts and other reported catalysts,SFS with an Fe2O3 loading of 30%(SFS-30)exhibits an outstanding activity in the probe reaction of alcoholysis of styrene oxide by methanol with 100%yield.Moreover,SFS-30 also shows a more excellent catalytic performance than bulk S2O82–-Fe2O3 towards the alcoholysis of other ROHs(R=C2H5-C4H9).Lewis and Bronsted acid sites on the SFS-30 surfaces are confirmed by pyridine adsorbed infrared spectra.The highly efficient catalytic activity of SFS-30 may be attributed to the synergistic effect from the nano-effect of S2O82–-Fe2O3 nanoparticles and the mesostructure of SBA-15.Finally,SFS-30 shows a good catalytic reusability,providing an 84.1%yield after seven catalytic cycles.展开更多
Approaches for the fabrication of a low power-operable formaldehyde(HCHO)gas sensor with high sensitivity and selectivity were performed by the utilization of an effective micro-structured platform with a micro-heater...Approaches for the fabrication of a low power-operable formaldehyde(HCHO)gas sensor with high sensitivity and selectivity were performed by the utilization of an effective micro-structured platform with a micro-heater to reach high temperature with low heating power as well as by the integration of indium oxide(In2O3)nanofibers decorated with well-dispersed Au nanoparticles as a sensing material.Homogeneous In2O3 nanofibers with the large specific surface area were prepared by the electrospinning following by calcination process.Au nanoparticles with the well-controlled size as a catalyst were synthesized on the surface of In2O3 nanofibers.The Au-decorated In2O3 nanofibers were reliably integrated as sensing materials on the bridge-type micro-platform including micro-heaters and micro-electrodes.The micro-platform designed to maintain high temperature with low power consumption was fabricated by a microelectromechanical system(MEMS)technique.The micro-platform gas sensor consisting with Au-In2O3 nanofibers were fabricated effectively to detect HCHO gases with high sensitivity and selectivity.The HCHO gas sensing behaviors were schematically studied as a function of the gas concentration,the size of the adsorbed Au nanoparticles,the applied power to raise the temperature of a sensing part and the kind of target gases.展开更多
基金supported by the National Natural Science Foundation of China (51372137)the National High Technology Research and Development Program of China (863 Program,2015AA034603)~~
文摘V2O5/WO3‐TiO2 and V2O5/WO3‐TiO2‐SiO2 catalysts were prepared by a wetness impregnation method, and both the catalysts were hydrothermally aged at 750℃ in 10 vol%H2O/air for 24 h. The catalysts were evaluated for NOx conversion using NH3 as the reductant. Hydrothermal ageing decreased the NOx conversion of V2O5/WO3‐TiO2 catalyst severely over the entire measured tem‐perature range. Interestingly, the NH3‐SCR activity of the silica‐modified catalyst at 220–480℃ is enhanced after ageing. The catalysts were characterized by X‐ray diffraction, nitrogen adsorption, X‐ray fluorescence, Raman spectroscopy, H2 temperature‐programmed reduction, and NH3 temper‐ature‐programmed desorption. The addition of silica inhibited the phase transition from anatase to rutile titania, growth of TiO2 crystallite size and shrinkage of catalyst surface area. Consequently, the vanadia species remained highly dispersed and the hydrothermal stability of the V2O5/WO3‐TiO2 catalyst was significantly improved.
基金sponsored by Shanghai Pujiang Program, China (No. 16PJ1401100)the Shanghai Committee of Science and Technology, China (No.15ZR1402000)+3 种基金Key Basic Research Program of Science and Technology Commission of Shanghai Municipality (No. 17JC1400100)the NSF of China(No. 21673048)National Youth Top Talent Support Program of National High-Level Personnel of Special Support Program (Youth Top-notch Talent Support Program)the State Key Laboratory of Transducer Technology of China (No. SKT1503)
文摘A versatile wet impregnation method was employed to conveniently and controllably deposit Fe_2O_3 nanoparticles on zeolites including commercial Y, mordenite and ZSM-5 with the similar framework Si/Al ratios and crystal sizes, respectively. The ultrafine Fe_2O_3 nanoparticles in size of 5 nm can be highly dispersed on zeolite Y matrix due to its much better wettability than ZSM-5 and mordenite. By using the obtained Fe_2O_3/zeolite composite as the heterogeneous Fenton-like catalysts, the degradation of phenol as a model reaction was systematically investigated, including the zeolite supports, particle size and dispersion of Fe_2O_3, and reaction conditions of H_2O_2 concentration, temperature, and pH value. The catalyst based on zeolite Y with Fe loading of 9% exhibited the best phenol degradation efficiency (> 90%)in neutral pH within 2 h. Its high catalytic activity in Fenton reaction can be attributed to the bifunctional properties of strong surface BrФnsted acidity and high reactivity of octahedral Fe^(3+) in the highlydispersed ultrafine Fe_2O_3 nanoparticles in size of 5 nm, which were the primary active centers to quickly decompose H_2O_2 into hydroxyl radicals. Since phenol degradation can be performed under mild conditions of ambient temperature (283-323 K) and a wide pH range (4.0-7.0), the catalysts can be easily recovered for recyclable use with stable degradation activity, which own the immense potential in deep treatment of organic pollutants in industrial wastewater.
文摘Mesoporous superacids S2O82–-Fe2O3/SBA-15(SFS)with active nanoparticles are prepared by ultrasonic adsorption method.This method is adopted to ensure a homo-dispersed nanoparticle active phase,large specific surface area and many acidic sites.Compared with bulk S2O82–-Fe2O3,Br?nsted acid catalysts and other reported catalysts,SFS with an Fe2O3 loading of 30%(SFS-30)exhibits an outstanding activity in the probe reaction of alcoholysis of styrene oxide by methanol with 100%yield.Moreover,SFS-30 also shows a more excellent catalytic performance than bulk S2O82–-Fe2O3 towards the alcoholysis of other ROHs(R=C2H5-C4H9).Lewis and Bronsted acid sites on the SFS-30 surfaces are confirmed by pyridine adsorbed infrared spectra.The highly efficient catalytic activity of SFS-30 may be attributed to the synergistic effect from the nano-effect of S2O82–-Fe2O3 nanoparticles and the mesostructure of SBA-15.Finally,SFS-30 shows a good catalytic reusability,providing an 84.1%yield after seven catalytic cycles.
基金supported financially by the Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(No.2017R1D1A1B03030796).
文摘Approaches for the fabrication of a low power-operable formaldehyde(HCHO)gas sensor with high sensitivity and selectivity were performed by the utilization of an effective micro-structured platform with a micro-heater to reach high temperature with low heating power as well as by the integration of indium oxide(In2O3)nanofibers decorated with well-dispersed Au nanoparticles as a sensing material.Homogeneous In2O3 nanofibers with the large specific surface area were prepared by the electrospinning following by calcination process.Au nanoparticles with the well-controlled size as a catalyst were synthesized on the surface of In2O3 nanofibers.The Au-decorated In2O3 nanofibers were reliably integrated as sensing materials on the bridge-type micro-platform including micro-heaters and micro-electrodes.The micro-platform designed to maintain high temperature with low power consumption was fabricated by a microelectromechanical system(MEMS)technique.The micro-platform gas sensor consisting with Au-In2O3 nanofibers were fabricated effectively to detect HCHO gases with high sensitivity and selectivity.The HCHO gas sensing behaviors were schematically studied as a function of the gas concentration,the size of the adsorbed Au nanoparticles,the applied power to raise the temperature of a sensing part and the kind of target gases.
