The energy release of energetic composites is severely limited by the inert alumina(Al_(2)O_(3))layer on the surface of aluminum(Al).Polytetrafluoroethylene(PTFE)could eliminate Al_(2)O_(3)layer due to its highly elec...The energy release of energetic composites is severely limited by the inert alumina(Al_(2)O_(3))layer on the surface of aluminum(Al).Polytetrafluoroethylene(PTFE)could eliminate Al_(2)O_(3)layer due to its highly electronegativity and oxidability of fluorine.However,adding PTFE particles would weaken interfacial interactions resulted in poor mechanical properties and interfacial exothermic reaction.Herein,a bridging Al-PTFE as fuel and interfacial reinforcing agent was added and used to prepare LLM-105/AlPTFE microspheres,achieving both high energy output and excellent mechanical properties.The energy release and combustion reaction performance of LLM-105/Al-PTFE microspheres are significantly improved due to high reaction heat and increased interfacial reaction area of Al-PTFE.The maximum pressure and pressurization rate of LLM-105/Al-PTFE microspheres are 164.06 kPa and 29.88 kPa/s,respectively,which are 40.11%and 16.67%higher than those of physical mixed samples.Furthermore,the tensile strength and compressive strength of LLM-105/Al-PTFE microspheres are 100.40%and 26.47%higher than those of LLM-105/Al.This work provides a new approach to improve the energy release and mechanical properties for energetic composites.展开更多
Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminumpolytetrafluoroethylene(Al-PTFE)granular composites under a low-velocity impact.A two-dimensional model followed the...Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminumpolytetrafluoroethylene(Al-PTFE)granular composites under a low-velocity impact.A two-dimensional model followed the randomly normal distribution of real Al particles size is developed.The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments.The results indicate that,force chains behavior governed by the number and the size of agglomerated Al particles,significantly affects the impact response of the material.The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density.A high crack area of the material is critical mechanism to arouse the initiation reaction.The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance.In addition,simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials.It is found that smaller sized Al particle of composites are more preferred than its bulky material in ultimate strength.Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number.The simulation studies provide further insights into the plastic deformation,failure mechanism,and possible energy release capacity for Al-PTFE composites,which is helpful for further design and application of reactive materials.展开更多
The penetration-deflagration coupling damage performance of rod-like reactive shaped charge pene-trator(RRSCP)impacting thick steel plates is investigated by theoretical analysis and experiments.A penetration-deflagra...The penetration-deflagration coupling damage performance of rod-like reactive shaped charge pene-trator(RRSCP)impacting thick steel plates is investigated by theoretical analysis and experiments.A penetration-deflagration coupling damage model is developed to predict the penetration depth and cratering diameter.Four type of aluminum-polytetrafluoroethylene-copper(Al-PTFE-Cu)reactive liners with densities of 2.3,2.7,3.5,and 4.5 g·cm^(-3) are selected to conduct the penetration experiments.The comparison results show that model predictions are in good agreement with the experimental data.By comparing the penetration depth and cratering diameter in the inert penetration mode and the penetration-deflagration coupling mode,the influence mechanism that the penetration-induced chemical response is unfavorable to penetration but has an enhanced cratering effect is revealed.From the formation characteristics,penetration effect and penetration-induced chemical reaction be-haviors,the influence of reactive liner density on the penetration-deflagration performance is further analyzed.The results show that increasing the density of reactive liner significantly increases both the kinetic energy and length of the reactive penetrator,meanwhile effectively reduces the weakened effect of penetration-induced chemical response,resulting in an enhanced penetration capability.However,due to the decreased diameter and potential energy content of reactive penetrator,the cratering capa-bility is weakened significantly.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.T2222027 and 12202416)。
文摘The energy release of energetic composites is severely limited by the inert alumina(Al_(2)O_(3))layer on the surface of aluminum(Al).Polytetrafluoroethylene(PTFE)could eliminate Al_(2)O_(3)layer due to its highly electronegativity and oxidability of fluorine.However,adding PTFE particles would weaken interfacial interactions resulted in poor mechanical properties and interfacial exothermic reaction.Herein,a bridging Al-PTFE as fuel and interfacial reinforcing agent was added and used to prepare LLM-105/AlPTFE microspheres,achieving both high energy output and excellent mechanical properties.The energy release and combustion reaction performance of LLM-105/Al-PTFE microspheres are significantly improved due to high reaction heat and increased interfacial reaction area of Al-PTFE.The maximum pressure and pressurization rate of LLM-105/Al-PTFE microspheres are 164.06 kPa and 29.88 kPa/s,respectively,which are 40.11%and 16.67%higher than those of physical mixed samples.Furthermore,the tensile strength and compressive strength of LLM-105/Al-PTFE microspheres are 100.40%and 26.47%higher than those of LLM-105/Al.This work provides a new approach to improve the energy release and mechanical properties for energetic composites.
基金the National Natural Science Foundation of China(No.U1730112).
文摘Force chains based mesoscale simulation is conducted to investigate the response behavior of aluminumpolytetrafluoroethylene(Al-PTFE)granular composites under a low-velocity impact.A two-dimensional model followed the randomly normal distribution of real Al particles size is developed.The dynamic compressive process of Al-PTFE composites with varied Al mass fraction is simulated and validated against the experiments.The results indicate that,force chains behavior governed by the number and the size of agglomerated Al particles,significantly affects the impact response of the material.The failure mode of the material evolves from shear failure of matrix to debonding failure of particles with increasing density.A high crack area of the material is critical mechanism to arouse the initiation reaction.The damage maintained by force chains during large plastic strain builds up more local stresses concentration to enhance a possible reaction performance.In addition,simulation is performed with identical mass fraction but various Al size distribution to explore the effects of size centralization and dispersion on the mechanical properties of materials.It is found that smaller sized Al particle of composites are more preferred than its bulky material in ultimate strength.Increasing dispersed degree is facilitated to create stable force chains in samples with comparable particle number.The simulation studies provide further insights into the plastic deformation,failure mechanism,and possible energy release capacity for Al-PTFE composites,which is helpful for further design and application of reactive materials.
基金supported by the National Natural Science Foundation of China(Grant No.12172052)the Foundation of State Key Laboratory of Explosion Science and Safety Protection(Grant No.QKKT24-02).
文摘The penetration-deflagration coupling damage performance of rod-like reactive shaped charge pene-trator(RRSCP)impacting thick steel plates is investigated by theoretical analysis and experiments.A penetration-deflagration coupling damage model is developed to predict the penetration depth and cratering diameter.Four type of aluminum-polytetrafluoroethylene-copper(Al-PTFE-Cu)reactive liners with densities of 2.3,2.7,3.5,and 4.5 g·cm^(-3) are selected to conduct the penetration experiments.The comparison results show that model predictions are in good agreement with the experimental data.By comparing the penetration depth and cratering diameter in the inert penetration mode and the penetration-deflagration coupling mode,the influence mechanism that the penetration-induced chemical response is unfavorable to penetration but has an enhanced cratering effect is revealed.From the formation characteristics,penetration effect and penetration-induced chemical reaction be-haviors,the influence of reactive liner density on the penetration-deflagration performance is further analyzed.The results show that increasing the density of reactive liner significantly increases both the kinetic energy and length of the reactive penetrator,meanwhile effectively reduces the weakened effect of penetration-induced chemical response,resulting in an enhanced penetration capability.However,due to the decreased diameter and potential energy content of reactive penetrator,the cratering capa-bility is weakened significantly.
