The isothermal sections of Al-Fe-Sn ternary system at 973 and 593 K were determined experimentally by the equilibriated alloy method using scanning electron microscopy coupled with energy-dispersive spectrometry and X...The isothermal sections of Al-Fe-Sn ternary system at 973 and 593 K were determined experimentally by the equilibriated alloy method using scanning electron microscopy coupled with energy-dispersive spectrometry and X-ray diffractometry. Experimental results show that no ternary compound is found on these two sections. The maximum solubility of Fe in the liquid phase is 1.6%（mole fraction） at 973 K and those of Fe and Al in the liquid phase are 0.6% and 5.1%（mole fraction） at 593 K, respectively. The maximum solubility of Sn in the Fe-Al compounds is 4.2%（mole fraction） at 973 K and 2.3%（mole fraction） at 593 K. All the Fe-Al compounds can be in equilibrium with the liquid phase.展开更多
The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstru...The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.展开更多
目的通过电感耦合等离子体质谱(inductively coupled plasma mass spectrometry,ICP-MS)法建立加味左金丸中Cd、Pb、As、Hg、Co、V、Ni、Cu、Li、Sb、Ba、Mo、Sn、Cr、Na、Mg、Al、Ca、Ti、Mn、Fe、Zn、Ga、Se、Sr、Tl共计26种无机元素...目的通过电感耦合等离子体质谱(inductively coupled plasma mass spectrometry,ICP-MS)法建立加味左金丸中Cd、Pb、As、Hg、Co、V、Ni、Cu、Li、Sb、Ba、Mo、Sn、Cr、Na、Mg、Al、Ca、Ti、Mn、Fe、Zn、Ga、Se、Sr、Tl共计26种无机元素的测定方法。方法加味左金丸通过微波消解法处理后,根据相对分子质量的大小选择内标物,其中^(7)Li、^(23)Na、^(24)Mg、^(27)Al、^(40)Ca、^(48)Ti、^(51)V、^(52)Cr、^(55)Mn、^(56)Fe、^(58)Ni、^(59)Co、^(63)Cu、^(66)Zn、^(70)Ga、^(75)As、^(77)Se、^(86)Sr以^(72)Ge作为内标;^(95)Mo、^(114)Cd、^(118)Sn、^(121)Sb、^(137)Ba以^(115)In作为内标;^(202)Hg、^(205)Tl、^(208)Pb以^(209)Bi作为内标。对标准品溶液、空白溶液与供试品溶液进行分析,采用标准曲线法进行定量分析。通过ICP-MS法进行测定。结果26种无机元素线性的相关系数r≥0.9996,检出限为0.001~1.500μg/L,定量限为0.01~5.00μg/L,精密度与重复性试验的RSD均小于5%,平均回收率在82.64%~106.44%,RSD均小于5%。对3个厂家的12批样品进行了测定,26种元素的含量差异较大,其中Na、Mg、Ca、Fe 4种元素的含量比较高,均大于500μg/g,Cd、Pb、As、Hg、Co、Li、Sb、Mo、Sn、Cr、Se、Tl的含量比较低,均小于1μg/g。由结果可知,人体的常量元素,如Na、Mg、Ca的含量比较高,Cd、Pb、As、Hg等有害元素含量比较低。根据《中国药典》2020年版一部的要求,本品中Cd、Pb、As、Hg与Cu均符合规定。结论该方法快速、准确,可以用于加味左金丸中无机元素的测定。展开更多
CO adsorption microcalorimetry was employed in the study of γ-Al-2O-3-supported Pt, Pt-Sn and Pt-Fe catalysts. The results indicated that the initial differential heat of CO adsorption of the Pt/γ-Al-2O-3 catalyst w...CO adsorption microcalorimetry was employed in the study of γ-Al-2O-3-supported Pt, Pt-Sn and Pt-Fe catalysts. The results indicated that the initial differential heat of CO adsorption of the Pt/γ-Al-2O-3 catalyst was 125 kJ/mol. As CO coverage increased, the differential heat of adsorption decreased. At higher coverages, the differential heat of adsorption decreased significantly. 60% of the differential heat of CO adsorption on the Pt/γ-Al-2O-3 catalyst was higher than 100 kJ/mol. No significant effect on the initial differential heat was found after adding Sn and Fe to the Pt/γ-Al-2O-3 catalyst. The amount of strong CO adsorption sites decreased, while the portion of CO adsorption sites with differential heat of 60110 kJ/mol increased after increasing the Sn or Fe content. This indicates that the surface adsorption energy was changed by adding Sn or Fe to Pt/γ-Al-2O-3. The distribution of differential heat of CO adsorption on the Pt-Sn（C）/γ-Al-2O-3 catalyst was broad and homogeneous. Comparison of the dehydrogenation performance of C-4 alkanes with the number of CO adsorption sites with differential heat of 60110 kJ/mol showed a good correlation. These results indicate that the surface Pt centers with differential heats of 60110 kJ/mol for CO adsorption possess superior activity for the dehydrogenation of alkanes.展开更多
基金Projects(51471141,51471140)supported by the National Natural Science Foundation of ChinaProject(2016JC2005)supported by the Scientific Research Fund of Hunan Provincial Science and Technology Department,China
文摘The isothermal sections of Al-Fe-Sn ternary system at 973 and 593 K were determined experimentally by the equilibriated alloy method using scanning electron microscopy coupled with energy-dispersive spectrometry and X-ray diffractometry. Experimental results show that no ternary compound is found on these two sections. The maximum solubility of Fe in the liquid phase is 1.6%（mole fraction） at 973 K and those of Fe and Al in the liquid phase are 0.6% and 5.1%（mole fraction） at 593 K, respectively. The maximum solubility of Sn in the Fe-Al compounds is 4.2%（mole fraction） at 973 K and 2.3%（mole fraction） at 593 K. All the Fe-Al compounds can be in equilibrium with the liquid phase.
基金supported by the National Natural Science Foundation of China(Nos.52105330,52175307)the Natural Science Foundation of Shandong Province,China(No.ZR2023JQ021)。
文摘The Sn−2Al filler metal was utilized to bond W90 tungsten heavy alloys by the ultrasonic-assisted coating technology in atmospheric environment at 250℃.The effects of ultrasonic power and ultrasonic time on microstructure and interfacial strength of Sn−2Al/W90 interface were investigated.The ultrasound improved the wettability of Sn−2Al filler metal on W90 surface.As the ultrasonic power increased and ultrasonic time increased,the size of Al phase in seam decreased.The maximum value of Sn−2Al/W90 interfacial strength reached 30.1 MPa.Based on the acoustic pressure simulation and bubble dynamics,the intensity of cavitation effect was proportional to ultrasonic power.The generated high temperature and high pressure by cavitation effect reached 83799.6 K and 1.26×10^(14) Pa,respectively.
文摘CO adsorption microcalorimetry was employed in the study of γ-Al-2O-3-supported Pt, Pt-Sn and Pt-Fe catalysts. The results indicated that the initial differential heat of CO adsorption of the Pt/γ-Al-2O-3 catalyst was 125 kJ/mol. As CO coverage increased, the differential heat of adsorption decreased. At higher coverages, the differential heat of adsorption decreased significantly. 60% of the differential heat of CO adsorption on the Pt/γ-Al-2O-3 catalyst was higher than 100 kJ/mol. No significant effect on the initial differential heat was found after adding Sn and Fe to the Pt/γ-Al-2O-3 catalyst. The amount of strong CO adsorption sites decreased, while the portion of CO adsorption sites with differential heat of 60110 kJ/mol increased after increasing the Sn or Fe content. This indicates that the surface adsorption energy was changed by adding Sn or Fe to Pt/γ-Al-2O-3. The distribution of differential heat of CO adsorption on the Pt-Sn（C）/γ-Al-2O-3 catalyst was broad and homogeneous. Comparison of the dehydrogenation performance of C-4 alkanes with the number of CO adsorption sites with differential heat of 60110 kJ/mol showed a good correlation. These results indicate that the surface Pt centers with differential heats of 60110 kJ/mol for CO adsorption possess superior activity for the dehydrogenation of alkanes.
