The microstructure of an Al-4Cu-Mg alloy during isothermal heat treatment in the Strain Induced Melt Activation （SIMA） process was investigated and the kinetics of grain growth was analyzed, The grain growth during ...The microstructure of an Al-4Cu-Mg alloy during isothermal heat treatment in the Strain Induced Melt Activation （SIMA） process was investigated and the kinetics of grain growth was analyzed, The grain growth during isothermal heat treatment of the Al-4Cu-Mg alloy coincided with the Ostwald ripening theory. During isothermal heat treatment, both grain shape and the high volume fraction of solid phase have significant effects on grain growth. Therefore, a new grain growth model based on the Ostwald ripening theory was proposed taking into consideration the grain shape and the volume fraction of solid phase. By comparing the calculated results with the experimental results, it was confirmed that the present model could be applied to grain growth during isothermal heat treatment of the Al-4Cu-Mg alloy in the SIMA process.展开更多
The microstructure of a cold-deformed Al-4Cu-Mg alloy during semi-solid treatment was investigated, which shows that grain detachment and grain spheroidization processes during the semi-solid treatment are very import...The microstructure of a cold-deformed Al-4Cu-Mg alloy during semi-solid treatment was investigated, which shows that grain detachment and grain spheroidization processes during the semi-solid treatment are very important to control the fabricated semi-solid microstructures. For the two different processes, the driving force comes from the external heat source and the reduction in total interfacial area, respectively. The evolution models of microstructure morphology in the two processes were presented based on microstructure observations. It can be found that these models are useful to provide a reasonable estimated critical time of the evolution of microstructure during the semi-solid treatment.展开更多
Effects of the process parameters, including deformation temperature, punch velocity and extrusion ratio, on the deformation and microstructure characterization during the semi-solid extrusion of Al-4Cu-Mg alloy, were...Effects of the process parameters, including deformation temperature, punch velocity and extrusion ratio, on the deformation and microstructure characterization during the semi-solid extrusion of Al-4Cu-Mg alloy, were investigated. The experimental results show that the load decreases with an increase of deformation temperature and/or a decrease of punch velocity. When the displacement is more than 4 mm,the load decreases significantly with an increase of the deformation temperature, which is related to the high liquid fraction. The microstructure varies with the process parameters and deformation regions. It can be found that the dynamic recovery occurs during the semi-solid extrusion of Al-4Cu-Mg alloy at lower deformation temperature. Subsequently, the microstructure elongated gradually polygonizes with an increase of deformation temperature. So, the higher deformation temperature should be chosen during the semi-solid extrusion of Al-4Cu-Mg alloy because the grains polygonized and high liquid fractions are beneficial to deformation.展开更多
基金financially supported by the Doctorate Creation Foundation of Northwestern Polytechnical University (No.200210)
文摘The microstructure of an Al-4Cu-Mg alloy during isothermal heat treatment in the Strain Induced Melt Activation （SIMA） process was investigated and the kinetics of grain growth was analyzed, The grain growth during isothermal heat treatment of the Al-4Cu-Mg alloy coincided with the Ostwald ripening theory. During isothermal heat treatment, both grain shape and the high volume fraction of solid phase have significant effects on grain growth. Therefore, a new grain growth model based on the Ostwald ripening theory was proposed taking into consideration the grain shape and the volume fraction of solid phase. By comparing the calculated results with the experimental results, it was confirmed that the present model could be applied to grain growth during isothermal heat treatment of the Al-4Cu-Mg alloy in the SIMA process.
基金This work was financially supported by the Doctorate Creation Foundation of Northwestern Polytechnical University (No.200210)
文摘The microstructure of a cold-deformed Al-4Cu-Mg alloy during semi-solid treatment was investigated, which shows that grain detachment and grain spheroidization processes during the semi-solid treatment are very important to control the fabricated semi-solid microstructures. For the two different processes, the driving force comes from the external heat source and the reduction in total interfacial area, respectively. The evolution models of microstructure morphology in the two processes were presented based on microstructure observations. It can be found that these models are useful to provide a reasonable estimated critical time of the evolution of microstructure during the semi-solid treatment.
基金Project(BK2005025) supported by the Fundamental Research Project of Jiangsu Province, China
文摘Effects of the process parameters, including deformation temperature, punch velocity and extrusion ratio, on the deformation and microstructure characterization during the semi-solid extrusion of Al-4Cu-Mg alloy, were investigated. The experimental results show that the load decreases with an increase of deformation temperature and/or a decrease of punch velocity. When the displacement is more than 4 mm,the load decreases significantly with an increase of the deformation temperature, which is related to the high liquid fraction. The microstructure varies with the process parameters and deformation regions. It can be found that the dynamic recovery occurs during the semi-solid extrusion of Al-4Cu-Mg alloy at lower deformation temperature. Subsequently, the microstructure elongated gradually polygonizes with an increase of deformation temperature. So, the higher deformation temperature should be chosen during the semi-solid extrusion of Al-4Cu-Mg alloy because the grains polygonized and high liquid fractions are beneficial to deformation.
