Induction motors （IMs） are commonly used in various industrial applications. To improve energy con- sumption efficiency, a reliable IM health condition moni- toring system is very useful to detect IM fault at its ea...Induction motors （IMs） are commonly used in various industrial applications. To improve energy con- sumption efficiency, a reliable IM health condition moni- toring system is very useful to detect IM fault at its earliest stage to prevent operation degradation, and malfunction of IMs. An intelligent harmonic synthesis technique is pro- posed in this work to conduct incipient air-gap eccentricity fault detection in IMs. The fault harmonic series are syn- thesized to enhance fault features. Fault related local spectra are processed to derive fault indicators for IM air- gap eccentricity diagnosis. The effectiveness of the pro- posed harmonic synthesis technique is examined experi- mentally by IMs with static air-gap eccentricity and dynamic air-gap eccentricity states under different load conditions. Test results show that the developed harmonic synthesis technique can extract fault features effectively for initial IM air-gap eccentricity fault detection.展开更多
The gear transmission system directly affects the operational performance of high-speed trains(HST).However,current research on gear transmission systems of HST often overlooks the effects of gear eccentricity and run...The gear transmission system directly affects the operational performance of high-speed trains(HST).However,current research on gear transmission systems of HST often overlooks the effects of gear eccentricity and running resistance,and the dynamic models of gear transmission system are not sufficiently comprehensive.This paper aims to establish an electromechanical coupling dynamic model of HST traction transmission system and study its electromechanical coupling vibration characteristics,in which the internal excitation factors such as gear eccentricity,time-varying meshing stiffness,backlash,meshing error,and external excitation factors such as electromagnetic torque and running resistance are stressed.The research results indicate that gear eccentricity and running resistance have a significant impact on the stability of the system,and gear eccentricity leads to intensified system vibration and decreased anti-interference ability.In addition,the characteristic frequency of gear eccentricity can be extracted from mechanical signals and current signals as a preliminary basis for eccentricity detection,and electrical signals can also be used to monitor changes in train running resistance in real time.The results of this study provide some useful insights into designing dynamic performance parameters for HST transmission systems and monitoring train operational states.展开更多
In visual measurement,high-precision camera calibration often employs circular targets.To address issues in mainstream methods,such as the eccentricity error of the circle from using the circle’s center for calibrati...In visual measurement,high-precision camera calibration often employs circular targets.To address issues in mainstream methods,such as the eccentricity error of the circle from using the circle’s center for calibration,overfitting or local minimum from fullparameter optimization,and calibration errors due to neglecting the center of distortion,a stepwise camera calibration method incorporating compensation for eccentricity error was proposed to enhance monocular camera calibration precision.Initially,the multiimage distortion correction method calculated the common center of distortion and coefficients,improving precision,stability,and efficiency compared to single-image distortion correction methods.Subsequently,the projection point of the circle’s center was compared with the center of the contour’s projection to iteratively correct the eccentricity error,leading to more precise and stable calibration.Finally,nonlinear optimization refined the calibration parameters to minimize reprojection error and boosts precision.These processes achieved stepwise camera calibration,which enhanced robustness.In addition,the module comparison experiment showed that both the eccentricity error compensation and the camera parameter optimization could improve the calibration precision,but the latter had a greater impact.The combined use of the two methods further improved the precision and stability.Simulations and experiments confirmed that the proposed method achieved high precision,stability,and robustness,suitable for high-precision visual measurements.展开更多
A microannulus(MA) is the primary reason for sustained casing pressure in multi-stage fractured-shale gas wells. However, the effect of the casing eccentricity on the long horizontal section has not been considered. I...A microannulus(MA) is the primary reason for sustained casing pressure in multi-stage fractured-shale gas wells. However, the effect of the casing eccentricity on the long horizontal section has not been considered. In this study, a full-scale integrity tester for cement sheaths is adopted to measure the cumulative plastic deformation. Numerical models are applied to evaluate the development of the cumulative plastic deformation and quantify the MA width considering casing centralization and eccentricity in the context of multiple loading and unloading cycles. Subsequently, the influences of the eccentricity distance and angle, cement-sheath mechanical variables, and different well depths on the cumulative sheath plastic deformation and sheath MA development are explored. The research results demonstrate that casing eccentricity significantly increases the cumulative sheath plastic deformation compared with that of the casing-centered condition. Consequently, the risk of sealing integrity failure increases. The accumulated plastic deformation increases when the eccentricity distance increases. In contrast, the initial plastic deformation increases as the eccentricity angle increases. However, the cumulative plastic deformation decreases after a specific loading and unloading cycle count. Affected by the coupled influence of the internal casing pressure and fracturing stages, the width of the MA in the horizontal section increased from the toe to the heel, and the casing eccentricity significantly increased the MA width at each stage, thus increasing the risk of gas channeling. Finally, an engineering case is considered to study the influence of casing eccentricity. The results show that cement slurries that form low and high elastic moduli can be applied to form a cement sheath when the fracturing stage is lower or higher than a specific value, respectively. The results of this study offer theoretical references and engineering support for the integrity control of cement sheath sealing.展开更多
This study focuses on variations in the hysteretic behavior of buckling-restrained braces(BRBs)configured with or without out-of-plane eccentricity under cyclic loading.Quasi-static experiments and numerical simulatio...This study focuses on variations in the hysteretic behavior of buckling-restrained braces(BRBs)configured with or without out-of-plane eccentricity under cyclic loading.Quasi-static experiments and numerical simulations were carried out on concentrically and eccentrically loaded BRB specimens to investigate the mechanical properties,energy dissipation performance,stress distribution,and high-order deformation pattern.The experimental and numerical results showed that compared to the concentrically loaded BRBs,the stiffness,yield force,cumulated plastic ductility(CPD)coefficient,equivalent viscous damping coefficient and energy dissipation decreased,and the yield displacement and compression strength adjustment factor increased for the eccentrically loaded BRBs.With the existence of the out-of-plane eccentricity,the initial yield position changes from the yield segment to the junction between the yield segment and transition segment under a tensile load,while the initial high-order buckling pattern changes from a first-order C-shape to a secondorder S-shape under a compressive load.展开更多
A novel three-dimensional numerical model is proposed to investigate the effect of tool eccentricity on the coupled thermal and material flow characteristics in friction stir welding(FSW) process.An asymmetrical bound...A novel three-dimensional numerical model is proposed to investigate the effect of tool eccentricity on the coupled thermal and material flow characteristics in friction stir welding(FSW) process.An asymmetrical boundary condition at the tool-workpiece interface,and the dynamic mesh technique are both employed for the consideration of the tool eccentricity during tool rotating.It is found that tool eccentricity induces the periodical variation of the heat densities both at the tool-workpiece interface and inside the shear layer,but the fluctuation amplitudes of the heat density variations are limited.However,it is demonstrated that tool eccentricity results in significant variation of the material flow behavior in one tool rotating period.Moreover,the material velocity variation at the retreating side is particularly important for the formation of the periodic characteristics in FSW.The modeling result is found to be in good agreement with the experimental one.展开更多
The main purpose of this paper is to investigate the effect of core eccentricity on the structural behavior of concrete tall buildings.Concrete buildings of 55 floors with plan dimensions 48.0×48.0 m2 were invest...The main purpose of this paper is to investigate the effect of core eccentricity on the structural behavior of concrete tall buildings.Concrete buildings of 55 floors with plan dimensions 48.0×48.0 m2 were investigated.Three cases of main core locations are studied:centric(A),eccentric by one sixth(B)and one third(C)of building width.The three-dimensional finite element method has been used in conducting structural analysis through ETABS software.Gravity and lateral(wind and seismic)loadings are applied to all building cases.It has been concluded that the core location is the prime parameter governing the structural behavior of tall buildings.Although the first two cases(A,B)have acceptable and similar structural behaviors conforming to code limits,in the third case(C),the building behavior came beyond code limits.The author introduced remedial action by adding two secondary cores in the opposite direction of the main core(C-R)to restore the building behavior to the code limits.The results of this action were satisfactory.展开更多
Background Serial sarcomere number(SSN)critically influences muscle function and is hypothesized to protect against injury.While most evidence for SSN addition comes from non-human animal studies,eccentric exercise is...Background Serial sarcomere number(SSN)critically influences muscle function and is hypothesized to protect against injury.While most evidence for SSN addition comes from non-human animal studies,eccentric exercise is often proposed as a key stimulus due to its association with increased fascicle length in humans.However,the most efficient exercise stimuli and the effectiveness of eccentric training in increasing SSN remain unclear.The objective of this study was to provide a detailed historical overview of research exploring the mechanical factors regulating muscle/fiber length and its relationship with function,and to explore more recent evidence that eccentric muscle contractions might be an important stimulus for SSN regulation using a meta-analytic approach.Methods An extensive literature search with snowballing was conducted to build the historical review.A systematic review with random-effect meta analyses was performed to compare proposed types of fiber-lengthening exercises to control conditions.Results The historical review demonstrated that the application of forces at long fiber lengths,but not specifically the use of greater excursions,plays an important role in increasing SSN.Animal data showed changes in SSN exceeding 20%over several weeks with varied forms of activities.Nonetheless,the meta-analysis revealed a lack of effect of eccentric resistance training in animal models(Δ=1%;Cohen’s d=0.19(95%confidence interval:–0.29 to 0.67),p=0.449).Conclusion High active or passive muscle forces applied at long fiber lengths appear to be the key stimuli triggering sarcomerogenesis.Eccentric exercise does not seem to be a key promoter of SSN.Too few studies exist to draw conclusions as to the effect of eccentric exercise on SSN in humans.Understanding the mechanical triggers and physiological mechanisms involved in serial sarcomere addition could help in the development of exercise(and other)interventions to optimize muscle function and reduce injury risk.展开更多
Sarcomerogenesis,the addition of serial sarcomeres in skeletal muscle myofibrils and fibres,is a natural occurrence during growth and maturation of animals,including humans.However,the detailed mechanisms that allow f...Sarcomerogenesis,the addition of serial sarcomeres in skeletal muscle myofibrils and fibres,is a natural occurrence during growth and maturation of animals,including humans.However,the detailed mechanisms that allow for sarcomerogenesis are not fully understood.In some diseases,such as cerebral palsy in children,sarcomerogenesis appears to be inhibited or at least reduced,1,2 often causing severe restrictions in muscle and joint function.展开更多
The first in vivo measurements of serial sarcomere number in human muscles before and after eccentric strength training have just been published and the results will interest anyone involved with sport or health:Train...The first in vivo measurements of serial sarcomere number in human muscles before and after eccentric strength training have just been published and the results will interest anyone involved with sport or health:Training the hamstrings 3 times per week for 9 weeks with the Nordic hamstring exercise was found to increase the number of sarcomeres in series in the biceps femoris long head(BFlh)by≥25%.1 In this commentary,we highlight an additional,paradoxical finding,which was not discussed by the authors;namely that the substantial serial sarcomere addition must have been accompanied by a subtraction of sarcomeres in parallel to match the relatively small increase in muscle volume after training.展开更多
Roll eccentricity is an important factor causing thickness variations during hot strip rolling and might define the limit of strip thickness control accuracy. An improved multi-resolution wavelet transform algorithm w...Roll eccentricity is an important factor causing thickness variations during hot strip rolling and might define the limit of strip thickness control accuracy. An improved multi-resolution wavelet transform algorithm was proposed to compensate for the roll eccentricity. The wavelet transform method had good localization characteristics in both the time and frequency domains for signal analysis; however, the wavelet method had a frequency-aliasing problem owing to the less than ideal cut-off frequency characteristics of wavelets. This made its component reconstruction of an inaccurate signal. To eliminate inherent frequency aliases in the wavelet transform, fast Fourier transform （FFT） and inverse fast Fourier transform （IFFT） were combined with the Mallat algorithm. This synthesis was described in detail. Then, the roll eccentricity component was extracted from rolling force signal. An automatic gauge control （AGC） system added with a multi-resolution wavelet analyzer was designed. Experimental results showed that the anti-aliasing method could greatly restrain the inverse effect of eccentricity and the thickness control accuracy was improved from ±40 μm to ±15 μm.展开更多
The anchoring eccentricity of the bolt and cable bolt is a common problem in geotechnical support engineering and affects the ability of the bolt and cable bolt to control the rock mass to a certain extent.This paper ...The anchoring eccentricity of the bolt and cable bolt is a common problem in geotechnical support engineering and affects the ability of the bolt and cable bolt to control the rock mass to a certain extent.This paper reports on numerical simulation and laboratory experiments conducted to clarify the effect of eccentricity on the anchoring quality of the bolt and cable bolt,and to establish an effective solution strategy.The results reveal that the anchoring eccentricity causes unbalanced stress distribution and the uncoordinated deformation of the resin layer,which results in higher stress and greater deformation of the resin layer at the near side of the rod body.Additionally,as the degree of anchoring eccentricity increases,the effect becomes more significant,and the resin layer of the anchoring system becomes more likely to undergo preferential failure locally,which weakens the load-bearing performance of the anchoring system.This paper develops an innovative bolt anchoring rectifying device(B-ARD)and cable bolt anchoring rectifying device(C-ARD)on the basis of the structural characteristics of the bolt and cable bolt to better ensure the anchoring effect of them.The working effects of these two devices were verified in detailed experiments and analysis.The experimental results show that the anchoring rectifying devices(ARD)improve and ensure the anchoring concentricity of the bolt and cable bolt,which will help improve the supporting performance of them.The paper provides a convenient and effective method for improving the anchoring concentricity of the bolt and cable bolt,and provides a concept and reference for technical research on improving the effect of roof bolting.展开更多
In this paper, an experimental study for an eccentrically loaded circular footing, resting on a geogridreinforced sand bed, is performed. To achieve this aim, the steel model footing of 120 mm in diameterand sand in r...In this paper, an experimental study for an eccentrically loaded circular footing, resting on a geogridreinforced sand bed, is performed. To achieve this aim, the steel model footing of 120 mm in diameterand sand in relative density of 60% are used. Also, the effects of depth of first and second geogrid layersand number of reinforcement layers （1e4） on the settlement-load response and tilt of footing undervarious load eccentricities （0 cm, 0.75 cm, 1.5 cm, 2.25 cm and 3 cm） are investigated. Test results indicatethat ultimate bearing capacity increases in comparison with unreinforced condition. It is observed thatwhen the reinforcements are placed in the optimum embedment depth （u/D ？0.42 and h/D ？0.42）, thebearing capacity ratio （BCR） increases with increasing load eccentricity to the core boundary of footing,and that with further increase of load eccentricity, the BCR decreases. Besides, the tilt of footing increaseslinearly with increasing settlement. Finally, by reinforcing the sand bed, the tilt of footing decreases at 2layers of reinforcement and then increases by increasing the number of reinforcement layers.展开更多
In rolling mill, the accuracy and quality of the strip exit thickness are very important factors. To realize high accuracy in the strip exit thickness, the Automatic Gauge Control (AGC) system is used. Because of roll...In rolling mill, the accuracy and quality of the strip exit thickness are very important factors. To realize high accuracy in the strip exit thickness, the Automatic Gauge Control (AGC) system is used. Because of roll eccentricity in backup rolls, the exit thickness deviates periodically. In this paper, we design PI controller in outer loop for the strip exit thickness while PD controller is used in inner loop for the work roll actuator position. Also, in order to reduce the periodic thickness deviation, we propose roll eccentricity compensation by using Fuzzy Neural Network with online tuning. Simulink model for the overall system has been implemented using MATLAB/SIMULINK software. The simulation results show the effectiveness of the proposed control.展开更多
Strategy of the shaft eccentricity is introduced to enhance the mixing characteristics in a flat bottomed cylindrical vessel without baffles. The mixing is ensured by a six-curved blade impeller. Three solutions which...Strategy of the shaft eccentricity is introduced to enhance the mixing characteristics in a flat bottomed cylindrical vessel without baffles. The mixing is ensured by a six-curved blade impeller. Three solutions which are models of food emulsions are used as working fluids. These solutions have a shear thinning behavior modeled by the power-law. The effects of fluid properties, stirring rates, impeller rotational direction and impeller eccentricity on the 3D flow fields and power consumption are investigated. Three values of impeller eccentricity are considered, namely 0%, 24% and 48% of the vessel diameter. It is found that the opposite clockwise rotational direction reduces the power consumption, compared with the clockwise rotational direction. Also, the obtained results show that an impeller placed at an eccentric position between 24% and 48% of the vessel diameter and at the third of the vessel height may ensure the best mixing characteristics.展开更多
The dominant and recessive effect made by exceptional interferer is analyzed in measurement system based on responsive character, and the gross error model of fuzzy clustering based on fuzzy relation and fuzzy equipol...The dominant and recessive effect made by exceptional interferer is analyzed in measurement system based on responsive character, and the gross error model of fuzzy clustering based on fuzzy relation and fuzzy equipollance relation is built. The concept and calculate formula of fuzzy eccentricity are defined to deduce the evaluation rule and function ofgruss error, on the base of them, a fuzzy clustering method of separating and discriminating the gross error is found, utilized in the dynamic circular division measurement system, the method can identify and eliminate gross error in measured data, and reduce measured data dispersity. Experimental results indicate that the use of the method and model enables repetitive precision of the system to improve 80% higher than the foregoing system, to reach 3.5 s, and angle measurement error is less than 7 s.展开更多
The rectification of eccentricity was revealed to be more effective in tube sinking than drawing with a mandrel.The ratio of thickness to diameter of tube blank on both sides of thick and thin wall seems to be the pri...The rectification of eccentricity was revealed to be more effective in tube sinking than drawing with a mandrel.The ratio of thickness to diameter of tube blank on both sides of thick and thin wall seems to be the principal influential factor in rectifying eccentricity.The greater the ini- tial outside diameter and the initial wall thickness difference are and the less the initial wall thickness of the tube blank is,the better the rectification is.展开更多
Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of na...Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of natural vibration of eccentric structures or finding a static displacement solution by applying an approximated equivalent torsional moment for each eccentric case. This study proposes an alternative modal response spectrum analysis （MRSA） approach to calculate seismic responses with accidental eccentricity. The proposed approach, called the Rayleigh Ritz Projection-MRSA （RRP-MRSA）, is developed based on MRSA and two strategies： （a） a RRf＂ method to obtain a fast calculation of approximate modes of eccentric structures; and （b） an approach to assemble mass matrices of eccentric structures. The efficiency of RRP-MRSA is tested via engineering examples and compared with the standard MRSA （ST-MRSA） and one approximate method, i.e., the equivalent torsional moment hybrid MRSA （ETM-MRSA）. Numerical results show that RRP-MRSA not only achieves almost the same precision as ST-MRSA, and is much better than ETM-MRSA, but is also more economical. Thus, RRP-MRSA can be in place of current accidental eccentricity computations in seismic design.展开更多
基金Supported in part by Natural Sciences and Engineering Research Council of Canada(NSERC)eMech Systems IncBare Point Water Treatment Plant in Thunder Bay,Ontario,Canada
文摘Induction motors （IMs） are commonly used in various industrial applications. To improve energy con- sumption efficiency, a reliable IM health condition moni- toring system is very useful to detect IM fault at its earliest stage to prevent operation degradation, and malfunction of IMs. An intelligent harmonic synthesis technique is pro- posed in this work to conduct incipient air-gap eccentricity fault detection in IMs. The fault harmonic series are syn- thesized to enhance fault features. Fault related local spectra are processed to derive fault indicators for IM air- gap eccentricity diagnosis. The effectiveness of the pro- posed harmonic synthesis technique is examined experi- mentally by IMs with static air-gap eccentricity and dynamic air-gap eccentricity states under different load conditions. Test results show that the developed harmonic synthesis technique can extract fault features effectively for initial IM air-gap eccentricity fault detection.
基金supported by Sichuan Science and Technology Program(Grant No.2020YFH0080)the National Natural Science Foundation of China(Grant No.51475386)the National Basic Research Project of China(973 Program,Grant No.2015CB654801).
文摘The gear transmission system directly affects the operational performance of high-speed trains(HST).However,current research on gear transmission systems of HST often overlooks the effects of gear eccentricity and running resistance,and the dynamic models of gear transmission system are not sufficiently comprehensive.This paper aims to establish an electromechanical coupling dynamic model of HST traction transmission system and study its electromechanical coupling vibration characteristics,in which the internal excitation factors such as gear eccentricity,time-varying meshing stiffness,backlash,meshing error,and external excitation factors such as electromagnetic torque and running resistance are stressed.The research results indicate that gear eccentricity and running resistance have a significant impact on the stability of the system,and gear eccentricity leads to intensified system vibration and decreased anti-interference ability.In addition,the characteristic frequency of gear eccentricity can be extracted from mechanical signals and current signals as a preliminary basis for eccentricity detection,and electrical signals can also be used to monitor changes in train running resistance in real time.The results of this study provide some useful insights into designing dynamic performance parameters for HST transmission systems and monitoring train operational states.
文摘In visual measurement,high-precision camera calibration often employs circular targets.To address issues in mainstream methods,such as the eccentricity error of the circle from using the circle’s center for calibration,overfitting or local minimum from fullparameter optimization,and calibration errors due to neglecting the center of distortion,a stepwise camera calibration method incorporating compensation for eccentricity error was proposed to enhance monocular camera calibration precision.Initially,the multiimage distortion correction method calculated the common center of distortion and coefficients,improving precision,stability,and efficiency compared to single-image distortion correction methods.Subsequently,the projection point of the circle’s center was compared with the center of the contour’s projection to iteratively correct the eccentricity error,leading to more precise and stable calibration.Finally,nonlinear optimization refined the calibration parameters to minimize reprojection error and boosts precision.These processes achieved stepwise camera calibration,which enhanced robustness.In addition,the module comparison experiment showed that both the eccentricity error compensation and the camera parameter optimization could improve the calibration precision,but the latter had a greater impact.The combined use of the two methods further improved the precision and stability.Simulations and experiments confirmed that the proposed method achieved high precision,stability,and robustness,suitable for high-precision visual measurements.
基金financially supported by the National Natural Science Foundation of China (Grant No. 52374001, No. 52004013)。
文摘A microannulus(MA) is the primary reason for sustained casing pressure in multi-stage fractured-shale gas wells. However, the effect of the casing eccentricity on the long horizontal section has not been considered. In this study, a full-scale integrity tester for cement sheaths is adopted to measure the cumulative plastic deformation. Numerical models are applied to evaluate the development of the cumulative plastic deformation and quantify the MA width considering casing centralization and eccentricity in the context of multiple loading and unloading cycles. Subsequently, the influences of the eccentricity distance and angle, cement-sheath mechanical variables, and different well depths on the cumulative sheath plastic deformation and sheath MA development are explored. The research results demonstrate that casing eccentricity significantly increases the cumulative sheath plastic deformation compared with that of the casing-centered condition. Consequently, the risk of sealing integrity failure increases. The accumulated plastic deformation increases when the eccentricity distance increases. In contrast, the initial plastic deformation increases as the eccentricity angle increases. However, the cumulative plastic deformation decreases after a specific loading and unloading cycle count. Affected by the coupled influence of the internal casing pressure and fracturing stages, the width of the MA in the horizontal section increased from the toe to the heel, and the casing eccentricity significantly increased the MA width at each stage, thus increasing the risk of gas channeling. Finally, an engineering case is considered to study the influence of casing eccentricity. The results show that cement slurries that form low and high elastic moduli can be applied to form a cement sheath when the fracturing stage is lower or higher than a specific value, respectively. The results of this study offer theoretical references and engineering support for the integrity control of cement sheath sealing.
基金National Natural Science Foundation of China under Grant No.51978184。
文摘This study focuses on variations in the hysteretic behavior of buckling-restrained braces(BRBs)configured with or without out-of-plane eccentricity under cyclic loading.Quasi-static experiments and numerical simulations were carried out on concentrically and eccentrically loaded BRB specimens to investigate the mechanical properties,energy dissipation performance,stress distribution,and high-order deformation pattern.The experimental and numerical results showed that compared to the concentrically loaded BRBs,the stiffness,yield force,cumulated plastic ductility(CPD)coefficient,equivalent viscous damping coefficient and energy dissipation decreased,and the yield displacement and compression strength adjustment factor increased for the eccentrically loaded BRBs.With the existence of the out-of-plane eccentricity,the initial yield position changes from the yield segment to the junction between the yield segment and transition segment under a tensile load,while the initial high-order buckling pattern changes from a first-order C-shape to a secondorder S-shape under a compressive load.
基金the financial support from the National Natural Science Foundation of China (Nos. 52005297, 52035005)the Key Research and Development Program of Shandong Province, China (No. 2021ZLGX01)。
文摘A novel three-dimensional numerical model is proposed to investigate the effect of tool eccentricity on the coupled thermal and material flow characteristics in friction stir welding(FSW) process.An asymmetrical boundary condition at the tool-workpiece interface,and the dynamic mesh technique are both employed for the consideration of the tool eccentricity during tool rotating.It is found that tool eccentricity induces the periodical variation of the heat densities both at the tool-workpiece interface and inside the shear layer,but the fluctuation amplitudes of the heat density variations are limited.However,it is demonstrated that tool eccentricity results in significant variation of the material flow behavior in one tool rotating period.Moreover,the material velocity variation at the retreating side is particularly important for the formation of the periodic characteristics in FSW.The modeling result is found to be in good agreement with the experimental one.
文摘The main purpose of this paper is to investigate the effect of core eccentricity on the structural behavior of concrete tall buildings.Concrete buildings of 55 floors with plan dimensions 48.0×48.0 m2 were investigated.Three cases of main core locations are studied:centric(A),eccentric by one sixth(B)and one third(C)of building width.The three-dimensional finite element method has been used in conducting structural analysis through ETABS software.Gravity and lateral(wind and seismic)loadings are applied to all building cases.It has been concluded that the core location is the prime parameter governing the structural behavior of tall buildings.Although the first two cases(A,B)have acceptable and similar structural behaviors conforming to code limits,in the third case(C),the building behavior came beyond code limits.The author introduced remedial action by adding two secondary cores in the opposite direction of the main core(C-R)to restore the building behavior to the code limits.The results of this action were satisfactory.
文摘Background Serial sarcomere number(SSN)critically influences muscle function and is hypothesized to protect against injury.While most evidence for SSN addition comes from non-human animal studies,eccentric exercise is often proposed as a key stimulus due to its association with increased fascicle length in humans.However,the most efficient exercise stimuli and the effectiveness of eccentric training in increasing SSN remain unclear.The objective of this study was to provide a detailed historical overview of research exploring the mechanical factors regulating muscle/fiber length and its relationship with function,and to explore more recent evidence that eccentric muscle contractions might be an important stimulus for SSN regulation using a meta-analytic approach.Methods An extensive literature search with snowballing was conducted to build the historical review.A systematic review with random-effect meta analyses was performed to compare proposed types of fiber-lengthening exercises to control conditions.Results The historical review demonstrated that the application of forces at long fiber lengths,but not specifically the use of greater excursions,plays an important role in increasing SSN.Animal data showed changes in SSN exceeding 20%over several weeks with varied forms of activities.Nonetheless,the meta-analysis revealed a lack of effect of eccentric resistance training in animal models(Δ=1%;Cohen’s d=0.19(95%confidence interval:–0.29 to 0.67),p=0.449).Conclusion High active or passive muscle forces applied at long fiber lengths appear to be the key stimuli triggering sarcomerogenesis.Eccentric exercise does not seem to be a key promoter of SSN.Too few studies exist to draw conclusions as to the effect of eccentric exercise on SSN in humans.Understanding the mechanical triggers and physiological mechanisms involved in serial sarcomere addition could help in the development of exercise(and other)interventions to optimize muscle function and reduce injury risk.
文摘Sarcomerogenesis,the addition of serial sarcomeres in skeletal muscle myofibrils and fibres,is a natural occurrence during growth and maturation of animals,including humans.However,the detailed mechanisms that allow for sarcomerogenesis are not fully understood.In some diseases,such as cerebral palsy in children,sarcomerogenesis appears to be inhibited or at least reduced,1,2 often causing severe restrictions in muscle and joint function.
文摘The first in vivo measurements of serial sarcomere number in human muscles before and after eccentric strength training have just been published and the results will interest anyone involved with sport or health:Training the hamstrings 3 times per week for 9 weeks with the Nordic hamstring exercise was found to increase the number of sarcomeres in series in the biceps femoris long head(BFlh)by≥25%.1 In this commentary,we highlight an additional,paradoxical finding,which was not discussed by the authors;namely that the substantial serial sarcomere addition must have been accompanied by a subtraction of sarcomeres in parallel to match the relatively small increase in muscle volume after training.
基金Item Sponsored by National Natural Science Foundation of China (60774032)Provincial Natural Science Foundation of Guangdong Province of China (06025724)+1 种基金Key Project of Guangzhou Scientific Program of China (2007Z2-D0121)Special Research Fund of Ministry of Education of China for College Doctoral Subjects (20070561006)
文摘Roll eccentricity is an important factor causing thickness variations during hot strip rolling and might define the limit of strip thickness control accuracy. An improved multi-resolution wavelet transform algorithm was proposed to compensate for the roll eccentricity. The wavelet transform method had good localization characteristics in both the time and frequency domains for signal analysis; however, the wavelet method had a frequency-aliasing problem owing to the less than ideal cut-off frequency characteristics of wavelets. This made its component reconstruction of an inaccurate signal. To eliminate inherent frequency aliases in the wavelet transform, fast Fourier transform （FFT） and inverse fast Fourier transform （IFFT） were combined with the Mallat algorithm. This synthesis was described in detail. Then, the roll eccentricity component was extracted from rolling force signal. An automatic gauge control （AGC） system added with a multi-resolution wavelet analyzer was designed. Experimental results showed that the anti-aliasing method could greatly restrain the inverse effect of eccentricity and the thickness control accuracy was improved from ±40 μm to ±15 μm.
基金This study was supported by the National Natural Science Foundation of China(No.52074102)Foundation for Distinguished Young Talents in Higher Education of Henan(No.212300410006)+1 种基金Foundation for the Science and Technology Innovation Talents Project of Universities in Henan(No.22HASTIT010)Special Funds for Fundamental Scientific Research Expenses of Universities in Henan(No.NSFRF210202).
文摘The anchoring eccentricity of the bolt and cable bolt is a common problem in geotechnical support engineering and affects the ability of the bolt and cable bolt to control the rock mass to a certain extent.This paper reports on numerical simulation and laboratory experiments conducted to clarify the effect of eccentricity on the anchoring quality of the bolt and cable bolt,and to establish an effective solution strategy.The results reveal that the anchoring eccentricity causes unbalanced stress distribution and the uncoordinated deformation of the resin layer,which results in higher stress and greater deformation of the resin layer at the near side of the rod body.Additionally,as the degree of anchoring eccentricity increases,the effect becomes more significant,and the resin layer of the anchoring system becomes more likely to undergo preferential failure locally,which weakens the load-bearing performance of the anchoring system.This paper develops an innovative bolt anchoring rectifying device(B-ARD)and cable bolt anchoring rectifying device(C-ARD)on the basis of the structural characteristics of the bolt and cable bolt to better ensure the anchoring effect of them.The working effects of these two devices were verified in detailed experiments and analysis.The experimental results show that the anchoring rectifying devices(ARD)improve and ensure the anchoring concentricity of the bolt and cable bolt,which will help improve the supporting performance of them.The paper provides a convenient and effective method for improving the anchoring concentricity of the bolt and cable bolt,and provides a concept and reference for technical research on improving the effect of roof bolting.
文摘In this paper, an experimental study for an eccentrically loaded circular footing, resting on a geogridreinforced sand bed, is performed. To achieve this aim, the steel model footing of 120 mm in diameterand sand in relative density of 60% are used. Also, the effects of depth of first and second geogrid layersand number of reinforcement layers （1e4） on the settlement-load response and tilt of footing undervarious load eccentricities （0 cm, 0.75 cm, 1.5 cm, 2.25 cm and 3 cm） are investigated. Test results indicatethat ultimate bearing capacity increases in comparison with unreinforced condition. It is observed thatwhen the reinforcements are placed in the optimum embedment depth （u/D ？0.42 and h/D ？0.42）, thebearing capacity ratio （BCR） increases with increasing load eccentricity to the core boundary of footing,and that with further increase of load eccentricity, the BCR decreases. Besides, the tilt of footing increaseslinearly with increasing settlement. Finally, by reinforcing the sand bed, the tilt of footing decreases at 2layers of reinforcement and then increases by increasing the number of reinforcement layers.
文摘In rolling mill, the accuracy and quality of the strip exit thickness are very important factors. To realize high accuracy in the strip exit thickness, the Automatic Gauge Control (AGC) system is used. Because of roll eccentricity in backup rolls, the exit thickness deviates periodically. In this paper, we design PI controller in outer loop for the strip exit thickness while PD controller is used in inner loop for the work roll actuator position. Also, in order to reduce the periodic thickness deviation, we propose roll eccentricity compensation by using Fuzzy Neural Network with online tuning. Simulink model for the overall system has been implemented using MATLAB/SIMULINK software. The simulation results show the effectiveness of the proposed control.
文摘Strategy of the shaft eccentricity is introduced to enhance the mixing characteristics in a flat bottomed cylindrical vessel without baffles. The mixing is ensured by a six-curved blade impeller. Three solutions which are models of food emulsions are used as working fluids. These solutions have a shear thinning behavior modeled by the power-law. The effects of fluid properties, stirring rates, impeller rotational direction and impeller eccentricity on the 3D flow fields and power consumption are investigated. Three values of impeller eccentricity are considered, namely 0%, 24% and 48% of the vessel diameter. It is found that the opposite clockwise rotational direction reduces the power consumption, compared with the clockwise rotational direction. Also, the obtained results show that an impeller placed at an eccentric position between 24% and 48% of the vessel diameter and at the third of the vessel height may ensure the best mixing characteristics.
基金This project is supported by National Natural Science Foundation of China (No.59575081,No.59735120).
文摘The dominant and recessive effect made by exceptional interferer is analyzed in measurement system based on responsive character, and the gross error model of fuzzy clustering based on fuzzy relation and fuzzy equipollance relation is built. The concept and calculate formula of fuzzy eccentricity are defined to deduce the evaluation rule and function ofgruss error, on the base of them, a fuzzy clustering method of separating and discriminating the gross error is found, utilized in the dynamic circular division measurement system, the method can identify and eliminate gross error in measured data, and reduce measured data dispersity. Experimental results indicate that the use of the method and model enables repetitive precision of the system to improve 80% higher than the foregoing system, to reach 3.5 s, and angle measurement error is less than 7 s.
文摘The rectification of eccentricity was revealed to be more effective in tube sinking than drawing with a mandrel.The ratio of thickness to diameter of tube blank on both sides of thick and thin wall seems to be the principal influential factor in rectifying eccentricity.The greater the ini- tial outside diameter and the initial wall thickness difference are and the less the initial wall thickness of the tube blank is,the better the rectification is.
基金National Natural Science Foundation of China under Grant No.10972005National Basic Research Program of China under Grant No.2007CB714603
文摘Accidental eccentricity is a non-standard assumption for seismic design of tall buildings. Taking it into consideration requires reanalysis of seismic resistance, which requires either time consuming computation of natural vibration of eccentric structures or finding a static displacement solution by applying an approximated equivalent torsional moment for each eccentric case. This study proposes an alternative modal response spectrum analysis （MRSA） approach to calculate seismic responses with accidental eccentricity. The proposed approach, called the Rayleigh Ritz Projection-MRSA （RRP-MRSA）, is developed based on MRSA and two strategies： （a） a RRf＂ method to obtain a fast calculation of approximate modes of eccentric structures; and （b） an approach to assemble mass matrices of eccentric structures. The efficiency of RRP-MRSA is tested via engineering examples and compared with the standard MRSA （ST-MRSA） and one approximate method, i.e., the equivalent torsional moment hybrid MRSA （ETM-MRSA）. Numerical results show that RRP-MRSA not only achieves almost the same precision as ST-MRSA, and is much better than ETM-MRSA, but is also more economical. Thus, RRP-MRSA can be in place of current accidental eccentricity computations in seismic design.
