The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average til...The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.展开更多
The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on ...The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on different air layer configurations.By using high-speed camera and dynamic measurement systems,the effects of air layers on the projectile penetration,pressure wave propagation,cavitation evolution,and structural dynamic responses were analyzed.The results showed that the rarefaction wave reflected from the air-liquid interface significantly reduced the peak and specific impulse of the initial pressure wave,thereby diminishing the impact load on the structure.Additionally,the compressibility of air layers also attenuated the cavitation extrusion load.Both front and rear plates exhibited superimposed deformation modes,i.e.,local deformation or petal fracture with global deformation.Air layers effectively mitigated global deformation.However,when the air layer was positioned on the projectile's trajectory,it split the water-entry process and velocity attenuation of the projectile into two relatively independent phases.And the secondary water entry pressure wave caused more severe local deformation and petal fractures on the rear plate.展开更多
LDACs(liquid desiccant air-conditioners)with heat pump can perform cooling dehumidification or heating humidification,and have high energy-saving and sterilization performance.Therefore,they are installed in hospitals...LDACs(liquid desiccant air-conditioners)with heat pump can perform cooling dehumidification or heating humidification,and have high energy-saving and sterilization performance.Therefore,they are installed in hospitals,nursing homes,and food factories,where humidity control is required.However,LiCl(lithium chloride),a conventional humidity control liquid,is highly corrosive to metals,requiring the use of highly corrosion-resistant materials for the pipes and the heat exchangers.These lead to the problem that the manufacturing cost of the air conditioner increases.Therefore,we developed an inexpensive and compact LDAC by adopting a novel IL(ionic liquid)that does not corrode the metals commonly used in air conditioners.In this study,we evaluated the metal solubilities and sterilizing properties of the IL.Based on the physical properties of the IL,the humidity control module was improved for the purpose of downsizing and cost reduction of the unit.Moreover,we conducted a performance evaluation of the LDAC in the environmental test room under the condition in which temperature and humidity change rapidly in short period of time to simulate the condition of sudden showers of rain in summer.Test results showed that processed air was supplied at very stable level.展开更多
The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can ...The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.展开更多
The activation of the sirtuin1(SIRT1)/nuclear factor erythroid 2-related factor 2(Nrf2)/heme oxygenase 1(HO-1)pathway has been shown to mitigate oxidative stress-induced apoptosis and mitochondrial damage by reducing ...The activation of the sirtuin1(SIRT1)/nuclear factor erythroid 2-related factor 2(Nrf2)/heme oxygenase 1(HO-1)pathway has been shown to mitigate oxidative stress-induced apoptosis and mitochondrial damage by reducing reactive oxygen species(ROS)levels.Clinical trials have demonstrated that Zhongfeng Xingnao Liquid(ZFXN)ameliorates post-stroke cognitive impairment(PSCI).However,the underlying mechanism,particularly whether it involves protecting mitochondria and inhibiting apoptosis through the SIRT1/Nrf2/HO-1 pathway,remains unclear.This study employed an oxygen-glucose deprivation(OGD)cell model using SHSY5Y cells and induced PSCI in rats through modified bilateral carotid artery ligation(2VO).The effects of ZFXN on learning and memory,neuroprotective activity,mitochondrial function,oxidative stress,and the SIRT1/Nrf2/HO-1 pathway were evaluated both in vivo and in vitro.Results indicated that ZFXN significantly increased the B-cell lymphoma 2(Bcl2)/Bcl2-associated X(Bax)ratio,reduced terminal deoxynucleotidyl transferase-mediated d UTP nickend-labeling(TUNEL)+cells,and markedly improved cognition,synaptic plasticity,and neuronal function in the hippocampus and cortex.Furthermore,ZFXN exhibited potent antioxidant activity,evidenced by decreased ROS and malondialdehyde(MDA)content and increased superoxide dismutase(SOD),catalase(CAT),and glutathione(GSH)levels.ZFXN also demonstrated considerable enhancement of mitochondrial membrane potential(MMP),Tom 20 fluorescence intensity,adenosine triphosphate(ATP)and energy charge(EC)levels,and mitochondrial complexⅠandⅢactivity,thereby inhibiting mitochondrial damage.Additionally,ZFXN significantly increased SIRT1 activity and elevated SIRT1,nuclear Nrf2,and HO-1 levels.Notably,these effects were substantially counteracted when SIRT1 was suppressed by the inhibitor EX-527 in vitro.In conclusion,ZFXN alleviates PSCI by activating the SIRT1/Nrf2/HO-1 pathway and preventing mitochondrial damage.展开更多
In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with l...In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.展开更多
In this work,tensile mechanical behavior of 316L steels fabricated by three different processing methods(casting,powder extrusion printing(PEP)and laser powder bed fusion(LPBF))was studied in the presence of liquid le...In this work,tensile mechanical behavior of 316L steels fabricated by three different processing methods(casting,powder extrusion printing(PEP)and laser powder bed fusion(LPBF))was studied in the presence of liquid lead-bismuth eutectic(LBE)and air at 350℃.The results show that all three steels tested in LBE are not subjected to evident degradation of tensile elongation to failure and strength compared to those tested in air,suggesting that LME does not occur regardless of the processing methods.The LPBF 316L steel exhibits the highest yield strength(420-435 MPa),followed by casting 316 L(~242 MPa)and PEP 316L(146-165 MPa).Ultimate tensile strength of three steels is comparable and ranges from 427 to 485 MPa.The PEP and casting 316L steels have similar total elongation to failure(i.e.,40.0%-43.8%),whereas this property decreases markedly to 18.6%-19.5% for the LPBF 316 L steel.The superior strength and relatively low ductility of the LPBF 316L steel can be attributed to nanosized dislocations trapped at cell structures which can produce a remarkable strengthening effect to the steel matrix.By contrast,due to massive residual micropores,the PEP 316L steel has the lowest strength.展开更多
Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were i...Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.展开更多
Soft machines harness material-level physical intelligence to perform adaptive tasks,enabling advancements in biomedical and human-machine interaction fields.Soft switches are the basic building blocks to achieve inte...Soft machines harness material-level physical intelligence to perform adaptive tasks,enabling advancements in biomedical and human-machine interaction fields.Soft switches are the basic building blocks to achieve intelligent functions like autonomous decisions and mechanical computation.However,current soft switches suffer from complex fabrication processes,limited performance,and a lack of multimodal control,which hinder their practical application and the realization of machine intelligence.Herein,by harnessing the unique self-pinch and self-healing effects of the gallium-based liquid metals(LMs),we describe a soft high-performance electric switch composed of an LM line encapsulated within an elastomer.Applying pressure to deform the LM switch can increase local current density,leading to the electromagnetic self-pinch effect for switching off.After releasing pressure,the LM can spontaneously heal with the elastic recovery of the elastomer for switching on.This LM switch shows comprehensive advantages,including a compact design(0.5 mm×1.5 mm×10 mm),good stretchability(100%),high on/off ratio(~10^(9)),rapid response time(<100 ms),and excellent durability(>12000 cycles).Moreover,the LM switches enable multiple control modes,including magnetic and optical stimulation,through the integration of responsive materials.We demonstrate various LM switch-enabled functional soft machines,such as an interactive flexible gripper,a self-oscillating soft crawler,and wearable logic gates.This work will open new avenues for the application of LM in intelligent soft machines and advanced wearable electronics.展开更多
This study investigates the reduction in polarization measurement accuracy caused by varying in-cident angles in a liquid crystal variable retarder(LCVR).The phase delay characteristics of the LCVR were examined,with ...This study investigates the reduction in polarization measurement accuracy caused by varying in-cident angles in a liquid crystal variable retarder(LCVR).The phase delay characteristics of the LCVR were examined,with particular emphasis on the influence of different two-dimensional incident angles on phase delay behavior.Building upon the calibration of phase delay under normal incidence,a phase delay calibra-tion model was developed to account for variations in incident angle and driving voltage.A mathematical re-lationship was established between phase delay and the azimuth angle(α)and pitch angle(β).Experimental validation was conducted under three conditions:α=20°,β=0°;α=0°,β=20°;and an arbitrary angle whereα=5°,β=15°.The results demonstrated that the maximum average deviation between theoretical pre-dictions and experimental measurements did not exceed 0.059 rad.The proposed calibration method proved to be both accurate and practical.This approach offers robust support for LCVR parameter calibration and performance optimization in optical systems,particularly in polarization imaging applications.展开更多
This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization usin...This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization using high-speed camera imaging.The T-junction microchannel has a cross-sectional width of 0.6 mm and a total length of 27.3 mm.The solution of cyclohexane with 2%and 3%mass concentrations of sorbitan trioleate surfactant were used as the continuous phase,and water was used as the dispersed phase.Slug flow,characteristic of squeezing regime,were predominantly observed.The effects of liquid–liquid two-phase flow rate ratio,and dimensionless number on droplet size,and pressure drop were investigated.The squeezing regime was mapped for 0.0005≤Ca_(c)≤0.0052(capillary number)and 0.1≤q≤10(flow rate ratio).The pressure drops of slugs were in the range from 40 Pa to 200 Pa.The slug lengths were measured between 1 mm and 9 mm.A universal flow map dependent on Ca_(c)Re_(d)^(0.5) are projected to investigate the droplet formation behavior in T-junction microchannel.Correlation expressions are proposed to predict pressure drops and the slug lengths for liquid–liquid two-phase flow in a square T-junction microchannel,using dimensionless numbers such as flow rate ratio and capillary number.The result shows that large continuous phase flow rates facilitate smaller slugs,whereas higher dispersed phase flow rates result in longer shorts.展开更多
Rapid developments in the electronic information industry drive the increased energy usage and carbon emission of data center buildings,prompting the focus on the energy efficiency and environmental sustainability.Exp...Rapid developments in the electronic information industry drive the increased energy usage and carbon emission of data center buildings,prompting the focus on the energy efficiency and environmental sustainability.Expanded operation envelopes of tropical data centers is assessed to analyze the potential for the building energy savings and carbon emission reduction through collaborative analysis of operation modes(OMs),supply air temperature(SAT),and outdoor air temperature(OAT).The OMs of compression vary with the setpoints of SAT,in which the average exergy efficiency of compressors at alternate operation mode is 6.8%and 8.0%lower than that of double and single compression operations.As SAT rises from 20℃to 32℃,the system exergoeconomic factor increases from 5.4%to 8.0%,and the average carbon cost decreases by 36.5%.Additionally,with just an 8.5%increase in exergy cost(i.e.,Case 8)at OAT rising from 30 to 34℃,the high SAT and low refrigerant charges provide considerable exergy cost advantages versus resisting the OAT fluctuations.Dynamic operation strategies are also proposed and compared to cope with the impacts of tropical environments.Compared to the 26℃SAT baseline,the average energy savings are 9.1-14.7%,indicating the ability to fully utilize outdoor and indoor conditions.展开更多
As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized fo...As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.展开更多
The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0....The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0.36,we studied the kagome-lattice t-J model using state-of-the-art density matrix renormalization group calculations.On the L_(y)=3 cylinder(Ly is the number of unit cells along the circumferential direction),we established a quantum phase diagram with an increasing doping level.In addition to the charge density wave states at lower doping levels,we found an emergent Fermi-liquid-like phase by melting the holon Wigner crystal at δ≈0.15,which is characterized by the suppression of charge density oscillation and power-law decay of various correlation functions.For a wider L_(y)=4 cylinder,the bond-dimension extrapolated correlation functions also support such a Fermi-liquid-like state,suggesting its stability with increasing system size.In a narrow doping range near δ=1/3 for the L_(y)=3 cylinder,we find a state with an exponential decay of the single-particle correlation,but the other correlation functions preserve the features in the Fermi-liquid-like phase,which may be a precursor of a superconducting state.Nevertheless,this peculiar state nearδ=1/3 disappears for the L_(y)=4 cylinder,implying a possible lattice-size dependence.Our results reveal quantum melting from a holon Wigner crystal to a Fermi-liquid-like state with increasing hole density and suggest a doping regime to explore superconductivity in future studies.展开更多
The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))an...The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))and Zn(BF_(4))_(2),the supramolecular gelatorβ-cyclodextrin(β-CD)was added,and then a gel electrolyte(CD-ILZE)for zinc-ion batteries was prepared through host-vip interaction betweenβ-CD and DMSO-ILZE electrolyte.The gel electrolyte has good conductivity between-30 and 80℃,which is found by fitting the Arrhenius equation that the gel electrolyte satisfies the liquid law within this temperature range.In addition,the supramolecular gel electrolyte can effectively decrease hydrogen evolution corrosion and the formation of zinc dendrites.Compared with the battery prepared by DMSO-ILZE electrolyte(about 1100 h),the prepared Zn||Zn battery exhibits a more stable cycle(over 2800 h)at a current density of 0.5 m A·cm^(-2).At 0.1 A·g^(-1),the prepared Zn||V_(2)O_(5)gel electrolyte cell has a capacity of 30 m Ah·g^(-1)and a capacity retention rate of 85.17%after more than 1500 cycles.The CD-ILZE supramolecular gel electrolyte can inhibit the formation of hydrogen evolution corrosion and zinc dendrites,and improve the cycling performance of the battery.展开更多
The Mechanism for Air pollution compleX version 1.0(MAX1),describing detailed tropospheric chemical processes,has been developed based on the latest knowledge.MAX1 contains 940 reactions,including photolysis,gaseous r...The Mechanism for Air pollution compleX version 1.0(MAX1),describing detailed tropospheric chemical processes,has been developed based on the latest knowledge.MAX1 contains 940 reactions,including photolysis,gaseous reactions,and heterogeneous reactions of 300 species,which is adequate for both box model and climate transport model(CTM)applications.Detailed chemical processes of chlorine chemistry,chemistry of Criegee intermediates,and heterogeneous uptake of HO_(2) and N_(2)O_(5) have been implemented and updated.With this level of explicitness,MAX1 can support investigations into the quantification of secondary pollutant productions and the chemical behavior of the crucial intermediates,such as organic peroxy radicals.Box model and CTM tests were conducted to evaluate the performance of MAX1 from different perspectives.Simulations of MAX1 successfully captured the variation of ozone in all cases tested.Meanwhile,significant improvement was made on predictions of radicals compared to other mechanisms,especially under the low NO_(x) environment,with good similarity to simulations of a nearly explicit chemical mechanism(i.e.,Master Chemical Mechanism)that contains over 17000 reactions.The computational expense of MAX1 is acceptable and it can be applied in atmospheric scientific research and air quality prediction.MAX1 introduces new dimensions in atmospheric chemistry modeling,and its potential application in policymaking is a promising yet exploratory step.It offers improved insights into air quality dynamics,which could assist policymakers in making more informed decisions.However,the translation of its detailed chemical understanding into practical strategies remains an area for further investigation.This model suggests a path towards more nuanced air pollution control methods,contributing to ongoing efforts in environmental management.展开更多
Exposure to urban air pollution during early pregnancy is associated with increased risk for adverse pregnancy outcomes,such as preeclampsia(PE),and there is an urgent need to understand how air pollution affects biol...Exposure to urban air pollution during early pregnancy is associated with increased risk for adverse pregnancy outcomes,such as preeclampsia(PE),and there is an urgent need to understand how air pollution affects biological mechanisms in the placenta.Hofbauer cells(HBCs)are fetal placental macrophages that regulate immune tolerance in the placenta.They are normally polarized towards an anti-inflammatory M2 phenotype but display a more pro-inflammatory M1 phenotype in PE.The ex vivo dual placental perfusion approach uses full term human placentas to study physiological aspects of the placenta.In this study,effects of urban traffic-derived particles of size<2.5μm(PM_(2.5))on placental tissue and HBC polarization was deciphered.To study changes in placental microarchitecture and cell morphology,transmission electron microscopy was applied.In addition,changes in cell surface markers on HBCs were determined by immunohistochemistry.Exposure to PM_(2.5) caused disrupted collagen structures and affected cell organelles in multiple cell types inside placental villi.The resident HBC marker CD163 was not affected by PM_(2.5) exposure,while CD206 was reduced by 60%and CD209 remained unchanged,indicating altered M2 polarization.Additionally,the expression of pro-inflammatory M1 markers CD40(p=0.02)and CD80(p=0.03)in HBCs increased due to urban PM_(2.5) exposure.Urban PM_(2.5) showed detrimental effects on the placenta by disrupting tissue morphology and affecting HBC polarization specifically.These results extend the currently accepted view on properties of HBCs,by demonstrating their ability to react plastically and specifically to different exogenous stimuli.展开更多
Despite the intrinsic durability of polymeric hole transport materials,poly-triarylamines(PTAA)-based inverted perovskite solar cells(PSCs)have lagged behind their counterparts in efficiency,primarily due to poor surf...Despite the intrinsic durability of polymeric hole transport materials,poly-triarylamines(PTAA)-based inverted perovskite solar cells(PSCs)have lagged behind their counterparts in efficiency,primarily due to poor surface wettability,insufficient interfacial contact,and unfavorable energy level alignment at the PTAA/perovskite interface.Here,we report a highly effective interfacial engineering strategy employing the ionic liquid 1,3-dimethylimidazolium dimethyl phosphate(DMIMPH)as a multifunctional interfacial modifier.The incorporation of DMIMPH improves PTAA wettability,promoting the growth of high-quality perovskite films with enhanced interfacial contact.Concurrently,DMIMPH effectively tunes the energy levels of PTAA,enhances its electrical conductivity,and passivates interfacial defects with more efficient hole extraction and charge transport.Moreover,its interaction with residual PbI_(2) modulates perovskite crystallization kinetics,yielding highly crystalline perovskite films with enlarged grain sizes,reduced PbI_(2) residue,and suppressed trap densities.As a result,PTAA-based p-i-n PSCs employing this approach achieve a record certified power conversion efficiency(PCE)of 24.52%,with a champion efficiency of 25.12%—the highest certified value for PTAA-based perovskite devices to date.Impressively,the DMIMPH-modified PSCs without encapsulation maintained 87.48%of their initial efficiency after 1600 h in air.This strategy offers an effective pathway for advancing the performance and stability of polymer-based inverted PSCs.展开更多
The efficient flotation separation of rare earth elements(REEs)from gangue minerals is crucial in mineral processing.This study synthesized a quaternary ammonium salt ionic liquid collector,tetrabutylammonium salicylh...The efficient flotation separation of rare earth elements(REEs)from gangue minerals is crucial in mineral processing.This study synthesized a quaternary ammonium salt ionic liquid collector,tetrabutylammonium salicylhydroxamate(T-S),and investigated its performance in separating bastnaesite and fluorite.T-S was synthesized from salicylhydroxamic acid(SHA)and tetrabutylammonium chloride(TBAC),and its molecular structure was characterized using Fourier transform infrared(FTIR)spectroscopy.Microflotation tests indicate that T-S outperforms SHA and TBAC in both collecting ability and selectivity for bastnaesite.Adsorption,zeta potential,and infrared spectroscopy measurements reveal that T-S exhibits stronger adsorption on bastnaesite compared to SHA and TBAC.X-ray photoelectron spectroscopy(XPS)and molecular dynamics simulations(MDS)results confirm that chemical adsorption occurs between Ce on the bastnaesite surface and the-C(=O)NHOH groups of T-S.Moreover,the interaction between T-S and the bastnaesite surface is stronger than that with the fluorite surface.This work provides valuable insights for designing ionic liquid collectors for the flotation separation of bastnaesite and fluorite.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 21227802, 21303216 and 21473217)
文摘The salt effects on molecular orientation at air/liquid methanol interface were investigated by the polarization-dependent sum frequency generation vibrational spectroscopy（SFG-VS）. We clarified that the average tilting angle of the methyl group to be u = 308 58 at the air/pure methanol surface assuming a d-function orientational distribution. Upon the addition of 3 mol/L Na I, the methyl group tilts further away from the surface normal with a new u = 418 38. This orientational change does not explain the enhancement of the SFG-VS intensities when adding Na I, implying the number density of the methanol molecules with a net polar ordering in the surface region also changed with the Na I concentrations. These spectroscopic findings shed new light on the salt effects on the surfaces structures of the polar organic solutions. It was also shown that the accurate determination of the bulk refractive indices and Raman depolarization ratios for different salt concentrations is crucial to quantitatively interpret the SFG-VS data.
基金the financial support provided by National Natural Science Foundation of China(Grant Nos.52271338,52371342 and 51979277).
文摘The study aims to explore the damage characteristics and protection technologies of liquid-filled structures under high-speed projectile impact.A series of penetration impact experiments were conducted by focusing on different air layer configurations.By using high-speed camera and dynamic measurement systems,the effects of air layers on the projectile penetration,pressure wave propagation,cavitation evolution,and structural dynamic responses were analyzed.The results showed that the rarefaction wave reflected from the air-liquid interface significantly reduced the peak and specific impulse of the initial pressure wave,thereby diminishing the impact load on the structure.Additionally,the compressibility of air layers also attenuated the cavitation extrusion load.Both front and rear plates exhibited superimposed deformation modes,i.e.,local deformation or petal fracture with global deformation.Air layers effectively mitigated global deformation.However,when the air layer was positioned on the projectile's trajectory,it split the water-entry process and velocity attenuation of the projectile into two relatively independent phases.And the secondary water entry pressure wave caused more severe local deformation and petal fractures on the rear plate.
文摘LDACs(liquid desiccant air-conditioners)with heat pump can perform cooling dehumidification or heating humidification,and have high energy-saving and sterilization performance.Therefore,they are installed in hospitals,nursing homes,and food factories,where humidity control is required.However,LiCl(lithium chloride),a conventional humidity control liquid,is highly corrosive to metals,requiring the use of highly corrosion-resistant materials for the pipes and the heat exchangers.These lead to the problem that the manufacturing cost of the air conditioner increases.Therefore,we developed an inexpensive and compact LDAC by adopting a novel IL(ionic liquid)that does not corrode the metals commonly used in air conditioners.In this study,we evaluated the metal solubilities and sterilizing properties of the IL.Based on the physical properties of the IL,the humidity control module was improved for the purpose of downsizing and cost reduction of the unit.Moreover,we conducted a performance evaluation of the LDAC in the environmental test room under the condition in which temperature and humidity change rapidly in short period of time to simulate the condition of sudden showers of rain in summer.Test results showed that processed air was supplied at very stable level.
基金German research Foundation(DFG,grant numbers:CH2321/1–1 and SCHO1231/7–1)JH has received a scholarship from the Chinese Scholarship Council(CSC No.:201908350115).
文摘The oviduct epithelium is the initial maternal contact site for embryos after fertilization,offering the microenviron-ment before implantation.This early gestation period is particularly sensitive to stress,which can cause reduced fertil-ity and reproductive disorders in mammals.Nevertheless,the local impact of elevated stress hormones on the ovi-duct epithelium has received limited attention to date,except for a few reports on polyovulatory species like mice and pigs.In this study,we focused on the effects of chronic maternal stress on cattle,given its association with infertil-ity issues in this monoovulatory species.Bovine oviduct epithelial cells(BOEC)differentiated at the air–liquid interface(ALI)were stimulated with 250 nmol/L cortisol for 1 or 3 weeks.Subsequently,they were assessed for morphology,bioelectrical properties,and gene expression related to oviduct function,glucocorticoid pathway,cortisol metabo-lism,inflammation,and apoptosis.Results revealed adverse effects of cortisol on epithelium structure,featured by deciliation,vacuole formation,and multilayering.Additionally,cortisol exposure led to an increase in transepithelial potential difference,downregulated mRNA expression of the major glucocorticoid receptor(NR3C1),upregulated the expression of cortisol-responsive genes(FKBP5,TSC22D3),and significant downregulation of oviductal glycopro-tein 1(OVGP1)and steroid receptors PGR and ESR1.The systematic comparison to a similar experiment previously performed by us in porcine oviduct epithelial cells,indicated that bovine cultures were more susceptible to elevated cortisol levels than porcine.The distinct responses between both species are likely linked to their divergence in the cortisol-induced expression changes of HSD11B2,an enzyme controlling the cellular capacity to metabolise cortisol.These findings provide insights into the species-specific reactions and reproductive consequences triggered by maternal stress.
基金supported by the Science&Technology Department of Sichuan Province(No.2019YFS0040)the Improvement Plan of“Xinglin Scholar”Scientific Research Talent,Chengdu University of Traditional Chinese Medicine(No.XKTD2022002)。
文摘The activation of the sirtuin1(SIRT1)/nuclear factor erythroid 2-related factor 2(Nrf2)/heme oxygenase 1(HO-1)pathway has been shown to mitigate oxidative stress-induced apoptosis and mitochondrial damage by reducing reactive oxygen species(ROS)levels.Clinical trials have demonstrated that Zhongfeng Xingnao Liquid(ZFXN)ameliorates post-stroke cognitive impairment(PSCI).However,the underlying mechanism,particularly whether it involves protecting mitochondria and inhibiting apoptosis through the SIRT1/Nrf2/HO-1 pathway,remains unclear.This study employed an oxygen-glucose deprivation(OGD)cell model using SHSY5Y cells and induced PSCI in rats through modified bilateral carotid artery ligation(2VO).The effects of ZFXN on learning and memory,neuroprotective activity,mitochondrial function,oxidative stress,and the SIRT1/Nrf2/HO-1 pathway were evaluated both in vivo and in vitro.Results indicated that ZFXN significantly increased the B-cell lymphoma 2(Bcl2)/Bcl2-associated X(Bax)ratio,reduced terminal deoxynucleotidyl transferase-mediated d UTP nickend-labeling(TUNEL)+cells,and markedly improved cognition,synaptic plasticity,and neuronal function in the hippocampus and cortex.Furthermore,ZFXN exhibited potent antioxidant activity,evidenced by decreased ROS and malondialdehyde(MDA)content and increased superoxide dismutase(SOD),catalase(CAT),and glutathione(GSH)levels.ZFXN also demonstrated considerable enhancement of mitochondrial membrane potential(MMP),Tom 20 fluorescence intensity,adenosine triphosphate(ATP)and energy charge(EC)levels,and mitochondrial complexⅠandⅢactivity,thereby inhibiting mitochondrial damage.Additionally,ZFXN significantly increased SIRT1 activity and elevated SIRT1,nuclear Nrf2,and HO-1 levels.Notably,these effects were substantially counteracted when SIRT1 was suppressed by the inhibitor EX-527 in vitro.In conclusion,ZFXN alleviates PSCI by activating the SIRT1/Nrf2/HO-1 pathway and preventing mitochondrial damage.
文摘In this work,we proposed a strategy for the hydrolysis of native corn starch after the treatment of corn starch in an ionic liquid aqueous solution,and it is an awfully“green”and simple means to obtain starch with low molecular weight and amorphous state.X-ray diffraction results revealed that the natural starch crystalline region was largely disrupted by ionic liquid owing to the broken intermolecular and intramolecular hydrogen bonds.After hydrolysis,the morphology of starch changed from particles of native corn starch into little pieces,and their molecular weight could be effectively regulated during the hydrolysis process,and also the hydrolyzed starch samples exhibited decreased thermal stability with the extension of hydrolysis time.This work would counsel as a powerful tool for the development of native starch in realistic applications.
基金Project(2024YFB4608600)supported by the National Key Research and Development Program of ChinaProjects(52271063,U21B2066,U24B2024)supported by the National Natural Science Foundation of China+3 种基金Project(JSGG20210713091539014)supported by the Shenzhen Science and Technology Innovation Commission Key Technical Project,ChinaProject(HNGD2025040)supported by the Overseas High-Level Talents Introduction of Henan Province,ChinaProject(240621041)supported by the Fundamental Research Funds of Henan Academy of Sciences,ChinaProject(20231120233925001)supported by Stabilization Support Program for Higher Education Institutions of Shenzhen,China。
文摘In this work,tensile mechanical behavior of 316L steels fabricated by three different processing methods(casting,powder extrusion printing(PEP)and laser powder bed fusion(LPBF))was studied in the presence of liquid lead-bismuth eutectic(LBE)and air at 350℃.The results show that all three steels tested in LBE are not subjected to evident degradation of tensile elongation to failure and strength compared to those tested in air,suggesting that LME does not occur regardless of the processing methods.The LPBF 316L steel exhibits the highest yield strength(420-435 MPa),followed by casting 316 L(~242 MPa)and PEP 316L(146-165 MPa).Ultimate tensile strength of three steels is comparable and ranges from 427 to 485 MPa.The PEP and casting 316L steels have similar total elongation to failure(i.e.,40.0%-43.8%),whereas this property decreases markedly to 18.6%-19.5% for the LPBF 316 L steel.The superior strength and relatively low ductility of the LPBF 316L steel can be attributed to nanosized dislocations trapped at cell structures which can produce a remarkable strengthening effect to the steel matrix.By contrast,due to massive residual micropores,the PEP 316L steel has the lowest strength.
基金supported by the National Natural Science Foundation of China(22278272)Natural Science Foundation of Liaoning Province(2024-MS-129).
文摘Separation of 2-methylfuran(2-MF)and methanol(MeOH)azeotropes is a key challenge in biofuel production because of the efficiency and sustainability issues of conventional methods.In this study,ionic liquids(ILs)were introduced as green solvents for separation of 2-MF/MeOH through liquid–liquid equilibrium(LLE)experiment.Three ILs,namely 1-ethyl-3-methylimidazole dihydrogen phosphate([EMIM][H_(2)PO_(4)]),1-propyl-3-methylimidazole dihydrogen phosphate([PMIM][H_(2)PO_(4)])and 1-butyl-3-methylimidazole dihydrogen phosphate([BMIM][H_(2)PO_(4)]),were screened out from 425 candidates using the conductor-like screening model for real solvents(COSMO-RS).Then,the ternary LLE data of 2-MF(1)+MeOH(2)+ILs(3)were determined at 30℃ and 101.32 kPa.Results confirmed[EMIM][H_(2)PO_(4)]as the best performer,achieving a selectivity of 343.86 and a distribution coefficient of 36.66 for MeOH—significantly higher than[PMIM][H_(2)PO_(4)]and[BMIM][H_(2)PO_(4)].The accuracy of the LLE data was verified by Othmer–Tobias and Hand equations(R^(2)>0.90).The non-random two liquid model was used to correlate the experimental data(RMSD<2%).Besides,the combination of electrostatic surfaces potential,independent gradient model based on Hirshfeld partition,mean square displacement and radial distribution functions revealed strong electrostatic interactions between[H_(2)PO_(4)]^(–) and MeOH.Interaction energy analysis further emphasizes the mechanism of MeOH separation from a mixture of 2-MF and MeOH by ILs.This work provides a multiscale strategy for the separation of 2-MF and MeOH azeotropes,highlighting the potential of ILs to improve biofuel purification while reducing energy and environmental costs.
基金financial support from the Natural Science Foundation of Jiangsu Province(BK20220859)the Jiangsu Provincial Scientific Research Center of Applied Mathematics(BK20233002)+2 种基金the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_0473)the SEU Innovation Capability Enhancement Plan for Doctoral Students(CXJH_SEU 24144)supported by Open Research Fund of State Key Laboratory of Analytical Chemistry for Life Science,School of Chemistry and Chemical Engineering,Nanjing University。
文摘Soft machines harness material-level physical intelligence to perform adaptive tasks,enabling advancements in biomedical and human-machine interaction fields.Soft switches are the basic building blocks to achieve intelligent functions like autonomous decisions and mechanical computation.However,current soft switches suffer from complex fabrication processes,limited performance,and a lack of multimodal control,which hinder their practical application and the realization of machine intelligence.Herein,by harnessing the unique self-pinch and self-healing effects of the gallium-based liquid metals(LMs),we describe a soft high-performance electric switch composed of an LM line encapsulated within an elastomer.Applying pressure to deform the LM switch can increase local current density,leading to the electromagnetic self-pinch effect for switching off.After releasing pressure,the LM can spontaneously heal with the elastic recovery of the elastomer for switching on.This LM switch shows comprehensive advantages,including a compact design(0.5 mm×1.5 mm×10 mm),good stretchability(100%),high on/off ratio(~10^(9)),rapid response time(<100 ms),and excellent durability(>12000 cycles).Moreover,the LM switches enable multiple control modes,including magnetic and optical stimulation,through the integration of responsive materials.We demonstrate various LM switch-enabled functional soft machines,such as an interactive flexible gripper,a self-oscillating soft crawler,and wearable logic gates.This work will open new avenues for the application of LM in intelligent soft machines and advanced wearable electronics.
文摘This study investigates the reduction in polarization measurement accuracy caused by varying in-cident angles in a liquid crystal variable retarder(LCVR).The phase delay characteristics of the LCVR were examined,with particular emphasis on the influence of different two-dimensional incident angles on phase delay behavior.Building upon the calibration of phase delay under normal incidence,a phase delay calibra-tion model was developed to account for variations in incident angle and driving voltage.A mathematical re-lationship was established between phase delay and the azimuth angle(α)and pitch angle(β).Experimental validation was conducted under three conditions:α=20°,β=0°;α=0°,β=20°;and an arbitrary angle whereα=5°,β=15°.The results demonstrated that the maximum average deviation between theoretical pre-dictions and experimental measurements did not exceed 0.059 rad.The proposed calibration method proved to be both accurate and practical.This approach offers robust support for LCVR parameter calibration and performance optimization in optical systems,particularly in polarization imaging applications.
基金supports for this project from the National Natural Science Foundation of China(22378295).
文摘This study investigates the droplet formation for the liquid–liquid two-phase flow within a square T-junction microchannel through numerical simulation using volume of fluid method and experimental visualization using high-speed camera imaging.The T-junction microchannel has a cross-sectional width of 0.6 mm and a total length of 27.3 mm.The solution of cyclohexane with 2%and 3%mass concentrations of sorbitan trioleate surfactant were used as the continuous phase,and water was used as the dispersed phase.Slug flow,characteristic of squeezing regime,were predominantly observed.The effects of liquid–liquid two-phase flow rate ratio,and dimensionless number on droplet size,and pressure drop were investigated.The squeezing regime was mapped for 0.0005≤Ca_(c)≤0.0052(capillary number)and 0.1≤q≤10(flow rate ratio).The pressure drops of slugs were in the range from 40 Pa to 200 Pa.The slug lengths were measured between 1 mm and 9 mm.A universal flow map dependent on Ca_(c)Re_(d)^(0.5) are projected to investigate the droplet formation behavior in T-junction microchannel.Correlation expressions are proposed to predict pressure drops and the slug lengths for liquid–liquid two-phase flow in a square T-junction microchannel,using dimensionless numbers such as flow rate ratio and capillary number.The result shows that large continuous phase flow rates facilitate smaller slugs,whereas higher dispersed phase flow rates result in longer shorts.
基金supported by the National Research Foundation,Singapore,funded under Energy Research Testbed and Industry Partnership Funding Initiative,part of the Energy Grid(EG)2.0 programme.
文摘Rapid developments in the electronic information industry drive the increased energy usage and carbon emission of data center buildings,prompting the focus on the energy efficiency and environmental sustainability.Expanded operation envelopes of tropical data centers is assessed to analyze the potential for the building energy savings and carbon emission reduction through collaborative analysis of operation modes(OMs),supply air temperature(SAT),and outdoor air temperature(OAT).The OMs of compression vary with the setpoints of SAT,in which the average exergy efficiency of compressors at alternate operation mode is 6.8%and 8.0%lower than that of double and single compression operations.As SAT rises from 20℃to 32℃,the system exergoeconomic factor increases from 5.4%to 8.0%,and the average carbon cost decreases by 36.5%.Additionally,with just an 8.5%increase in exergy cost(i.e.,Case 8)at OAT rising from 30 to 34℃,the high SAT and low refrigerant charges provide considerable exergy cost advantages versus resisting the OAT fluctuations.Dynamic operation strategies are also proposed and compared to cope with the impacts of tropical environments.Compared to the 26℃SAT baseline,the average energy savings are 9.1-14.7%,indicating the ability to fully utilize outdoor and indoor conditions.
基金financially supported by the National Natural Science Foundation of China(Nos.22005226 and 52203124)Center for Carbon Neutral Chemistry,Institute of Chemistry,Chinese Academy of Sciences(No.CCNC-202402)+1 种基金the Basic and Advanced Research Project from Wuhan Science and Technology Bureau(No.2022013988065201)Hubei Integrative Technology and Innovation Center for Advanced Fiberous Materials,project(No.XC2024G3013)。
文摘As the global textile industry has accelerated its transition to a circular economy,iterative innovation in regenerated cellulose fibers has become a key industry focus.With viscose fiber having been industrialized for over a century and lyocell fiber gaining market recognition because of its environmentally friendly process,which is the next regenerated cellulose fiber.Herein,ionic liquids with low vapor pressure,nonflammability,relatively simple recovery,and high dissolution efficiency were used to fabricate regenerated cellulose fibers.The viscose and lyocell properties of the fibers were systematically compared,including microscopic morphology,dyeing behavior,fibrillation resistance,mechanical properties,yarn-forming capacity,and fabric performance.The ionic liquid(IL)fiber exhibited a smooth surface and circular cross-section,with the highest tensile strength,moderate dyeing and fibrillation properties,and similar spinning and weaving performance.This work can provide a reference for the commercial application of regenerated cellulose fibers fabricated from ionic liquid.
基金supported by the National Natural Science Foundation of China (Grant Nos.12274014 and 12534009)the Guangdong Provincial Quantum Science Strategic Initiative (Grant No.GDZX2501006)+4 种基金the Special Project in Key Areas for Universities in Guangdong Province (Grant No.2023ZDZX3054)the Dongguan Key Laboratory of Artificial Intelligence Design for Advanced Materialssupported by the U.S.Department of Energy,Office of Basic Energy Sciences (Grant No.DE-FG02-06ER46305) for DMRG studies on unconventional superconductivitysupported by the SongShan Lake HPC Center (SSL-HPC) at Great Bay University (X.Y.J.and S.S.G.)supported in part by the US National Science Foundation (Grant No.DMR-2406524) (D.N.S.)。
文摘The doped quantum spin liquid on the kagome lattice provides a fascinating platform to explore exotic quantum states,such as the reported holon Wigner crystal at low doping.By extending the doping range toδ=0.027–0.36,we studied the kagome-lattice t-J model using state-of-the-art density matrix renormalization group calculations.On the L_(y)=3 cylinder(Ly is the number of unit cells along the circumferential direction),we established a quantum phase diagram with an increasing doping level.In addition to the charge density wave states at lower doping levels,we found an emergent Fermi-liquid-like phase by melting the holon Wigner crystal at δ≈0.15,which is characterized by the suppression of charge density oscillation and power-law decay of various correlation functions.For a wider L_(y)=4 cylinder,the bond-dimension extrapolated correlation functions also support such a Fermi-liquid-like state,suggesting its stability with increasing system size.In a narrow doping range near δ=1/3 for the L_(y)=3 cylinder,we find a state with an exponential decay of the single-particle correlation,but the other correlation functions preserve the features in the Fermi-liquid-like phase,which may be a precursor of a superconducting state.Nevertheless,this peculiar state nearδ=1/3 disappears for the L_(y)=4 cylinder,implying a possible lattice-size dependence.Our results reveal quantum melting from a holon Wigner crystal to a Fermi-liquid-like state with increasing hole density and suggest a doping regime to explore superconductivity in future studies.
文摘The preparation of ionic liquid gel electrolyte can reduce the occurrence of side effects and extend battery life.In the DMSO-ILZE electrolyte composed of DMSO,1-ethyl-3-methylimidazole tetrafluoroborate(EMIMBF_(4))and Zn(BF_(4))_(2),the supramolecular gelatorβ-cyclodextrin(β-CD)was added,and then a gel electrolyte(CD-ILZE)for zinc-ion batteries was prepared through host-vip interaction betweenβ-CD and DMSO-ILZE electrolyte.The gel electrolyte has good conductivity between-30 and 80℃,which is found by fitting the Arrhenius equation that the gel electrolyte satisfies the liquid law within this temperature range.In addition,the supramolecular gel electrolyte can effectively decrease hydrogen evolution corrosion and the formation of zinc dendrites.Compared with the battery prepared by DMSO-ILZE electrolyte(about 1100 h),the prepared Zn||Zn battery exhibits a more stable cycle(over 2800 h)at a current density of 0.5 m A·cm^(-2).At 0.1 A·g^(-1),the prepared Zn||V_(2)O_(5)gel electrolyte cell has a capacity of 30 m Ah·g^(-1)and a capacity retention rate of 85.17%after more than 1500 cycles.The CD-ILZE supramolecular gel electrolyte can inhibit the formation of hydrogen evolution corrosion and zinc dendrites,and improve the cycling performance of the battery.
基金supported by the National Natural Science Foundation of China(Grant Nos.22325601,92044302,42377105)the National Key Scientific and Technological Infrastructure project“Earth System Science Numerical Simulator Facility”.
文摘The Mechanism for Air pollution compleX version 1.0(MAX1),describing detailed tropospheric chemical processes,has been developed based on the latest knowledge.MAX1 contains 940 reactions,including photolysis,gaseous reactions,and heterogeneous reactions of 300 species,which is adequate for both box model and climate transport model(CTM)applications.Detailed chemical processes of chlorine chemistry,chemistry of Criegee intermediates,and heterogeneous uptake of HO_(2) and N_(2)O_(5) have been implemented and updated.With this level of explicitness,MAX1 can support investigations into the quantification of secondary pollutant productions and the chemical behavior of the crucial intermediates,such as organic peroxy radicals.Box model and CTM tests were conducted to evaluate the performance of MAX1 from different perspectives.Simulations of MAX1 successfully captured the variation of ozone in all cases tested.Meanwhile,significant improvement was made on predictions of radicals compared to other mechanisms,especially under the low NO_(x) environment,with good similarity to simulations of a nearly explicit chemical mechanism(i.e.,Master Chemical Mechanism)that contains over 17000 reactions.The computational expense of MAX1 is acceptable and it can be applied in atmospheric scientific research and air quality prediction.MAX1 introduces new dimensions in atmospheric chemistry modeling,and its potential application in policymaking is a promising yet exploratory step.It offers improved insights into air quality dynamics,which could assist policymakers in making more informed decisions.However,the translation of its detailed chemical understanding into practical strategies remains an area for further investigation.This model suggests a path towards more nuanced air pollution control methods,contributing to ongoing efforts in environmental management.
基金supported by The Swedish Research Council(Vetenskapsrådet,No.314373.35.135949)ALF+3 种基金SUS FoundationRegion Skånes Foundations in Swedensupported through the PhD program Inflammatory Disorders in Pregnancy(DP-iDP)by the Austrian Science Fund FWF(No.Doc 31-B26)the Medical University of Graz,Austria.
文摘Exposure to urban air pollution during early pregnancy is associated with increased risk for adverse pregnancy outcomes,such as preeclampsia(PE),and there is an urgent need to understand how air pollution affects biological mechanisms in the placenta.Hofbauer cells(HBCs)are fetal placental macrophages that regulate immune tolerance in the placenta.They are normally polarized towards an anti-inflammatory M2 phenotype but display a more pro-inflammatory M1 phenotype in PE.The ex vivo dual placental perfusion approach uses full term human placentas to study physiological aspects of the placenta.In this study,effects of urban traffic-derived particles of size<2.5μm(PM_(2.5))on placental tissue and HBC polarization was deciphered.To study changes in placental microarchitecture and cell morphology,transmission electron microscopy was applied.In addition,changes in cell surface markers on HBCs were determined by immunohistochemistry.Exposure to PM_(2.5) caused disrupted collagen structures and affected cell organelles in multiple cell types inside placental villi.The resident HBC marker CD163 was not affected by PM_(2.5) exposure,while CD206 was reduced by 60%and CD209 remained unchanged,indicating altered M2 polarization.Additionally,the expression of pro-inflammatory M1 markers CD40(p=0.02)and CD80(p=0.03)in HBCs increased due to urban PM_(2.5) exposure.Urban PM_(2.5) showed detrimental effects on the placenta by disrupting tissue morphology and affecting HBC polarization specifically.These results extend the currently accepted view on properties of HBCs,by demonstrating their ability to react plastically and specifically to different exogenous stimuli.
基金supported by the Research Projects of the Department of Education of Guangdong Province 2024ZDZX3079The financial support from the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011677)+4 种基金the Scientific and Technical Innovation Council of Shenzhen(20220812165832002)the Research Projects of Department of Education of Guangdong Province-2023GCZX015the Innovation Team Project of Guangdong(2022KCXTD055)the China Postdoctoral Science Foundation(Certificate Number:2024M763441)is gratefully acknowledgedsupported by the Postdoctoral Fellowship Program of CPSF under Grant Number GZB20250031 and Research Projects of the Department of Education of Guangdong Province 2023GCZX015。
文摘Despite the intrinsic durability of polymeric hole transport materials,poly-triarylamines(PTAA)-based inverted perovskite solar cells(PSCs)have lagged behind their counterparts in efficiency,primarily due to poor surface wettability,insufficient interfacial contact,and unfavorable energy level alignment at the PTAA/perovskite interface.Here,we report a highly effective interfacial engineering strategy employing the ionic liquid 1,3-dimethylimidazolium dimethyl phosphate(DMIMPH)as a multifunctional interfacial modifier.The incorporation of DMIMPH improves PTAA wettability,promoting the growth of high-quality perovskite films with enhanced interfacial contact.Concurrently,DMIMPH effectively tunes the energy levels of PTAA,enhances its electrical conductivity,and passivates interfacial defects with more efficient hole extraction and charge transport.Moreover,its interaction with residual PbI_(2) modulates perovskite crystallization kinetics,yielding highly crystalline perovskite films with enlarged grain sizes,reduced PbI_(2) residue,and suppressed trap densities.As a result,PTAA-based p-i-n PSCs employing this approach achieve a record certified power conversion efficiency(PCE)of 24.52%,with a champion efficiency of 25.12%—the highest certified value for PTAA-based perovskite devices to date.Impressively,the DMIMPH-modified PSCs without encapsulation maintained 87.48%of their initial efficiency after 1600 h in air.This strategy offers an effective pathway for advancing the performance and stability of polymer-based inverted PSCs.
基金Project supported by the National Key Research and Development Program of China(2022YFC2905800)National Natural Science Foundation of China(52374276,52274269)+2 种基金Yunnan Fundamental Re search Projects(202401AS070051)the Natural Science Foundation of Hubei Province of China(2024AFD123)Young Elite Scientists Sponsorship Program by CAST(YESS20200276)。
文摘The efficient flotation separation of rare earth elements(REEs)from gangue minerals is crucial in mineral processing.This study synthesized a quaternary ammonium salt ionic liquid collector,tetrabutylammonium salicylhydroxamate(T-S),and investigated its performance in separating bastnaesite and fluorite.T-S was synthesized from salicylhydroxamic acid(SHA)and tetrabutylammonium chloride(TBAC),and its molecular structure was characterized using Fourier transform infrared(FTIR)spectroscopy.Microflotation tests indicate that T-S outperforms SHA and TBAC in both collecting ability and selectivity for bastnaesite.Adsorption,zeta potential,and infrared spectroscopy measurements reveal that T-S exhibits stronger adsorption on bastnaesite compared to SHA and TBAC.X-ray photoelectron spectroscopy(XPS)and molecular dynamics simulations(MDS)results confirm that chemical adsorption occurs between Ce on the bastnaesite surface and the-C(=O)NHOH groups of T-S.Moreover,the interaction between T-S and the bastnaesite surface is stronger than that with the fluorite surface.This work provides valuable insights for designing ionic liquid collectors for the flotation separation of bastnaesite and fluorite.
