By use of the two-layer adiabatic globe spectral model and the zonally averaged climatic data of winter season as initial values, 10-day integrations are carried out based on three kinds of model topography (i.e., (1)...By use of the two-layer adiabatic globe spectral model and the zonally averaged climatic data of winter season as initial values, 10-day integrations are carried out based on three kinds of model topography (i.e., (1) the averaged topography; (2) the envelope topography; (3) the modified envelope topography). The results show that the orography of the Northern Hemisphere plays an important role in the simulation of large-scale weather patterns in winter season. The simulation based on the envelope topography developed by Wallace et al. has some improvements in the Rocky Mountains area. But this scheme causes very serious horizontal expansion around the Tibetan Plateau (hereafter referred to as the TV). A modified envelope topography scheme has been worked out that increases the slope of the TP by decreasing the horizontal expansion while keeping the maximum altitude. The results show some improvements of the scheme around the TP. By analysis of the mechanical effects of the large-scale orography on the currents, the different forcings of the air flow over and around the TP and the Rocky Mountain (the RM) are investigated.展开更多
A novel hood structure has been designed for the dust control system in the foundry in order to improve the working environment. A composite strategy has been applied for comparative analysis of the optimal venting vo...A novel hood structure has been designed for the dust control system in the foundry in order to improve the working environment. A composite strategy has been applied for comparative analysis of the optimal venting volume and the airflow distribution between the conventional hood and the novel one in this study. A Computational Fluid Dynamic (CFD) method is used to simulate the airflow fields and dust-polluted air moving paths. The CFD results show that a two-outlet hood, with one outlet located on the left of the hood, is better for improving dust-polluted air than the hood with one outlet only. It can be concluded that the number of the outlets as well as their location on the hood has a significant influence on the air flow pattern in the hood. The optimal venting volume is also a major consideration that is discussed in the study. The venting volume should be designed by considering both the effective level of air flow velocity around the dust source and the energy saving. The optimal airflow distribution may reduce the turbulence in the hood system.展开更多
An atmospheric pressure dielectric barrier discharge （DBD） plasma jet generator using air flow as the feedstock gas was applied to decontaminate the chemical agent surrogates on the surface of aluminum, stainless st...An atmospheric pressure dielectric barrier discharge （DBD） plasma jet generator using air flow as the feedstock gas was applied to decontaminate the chemical agent surrogates on the surface of aluminum, stainless steel or iron plate painted with alkyd or PVC. The experi- mental results of material decontamination show that the residual chemical agent on the material is lower than the permissible value of the National Military Standard of China. In order to test the corrosion effect of the plasma jet on different material surfaces in the decontamination pro-cess, corrosion tests for the materials of polymethyl methacrylate, neoprene, polyvinyl chloride （PVC）, polyethylene （PE）, phenolic resin, iron plate painted with alkyd, stainless steel, aluminum, etc. were carried out, and relevant parameters were examined, including etiolation index, chroma- tism, loss of gloss, corrosion form, etc. The results show that the plasma jet is slightly corrosive for part of the materials, but their performances are not affected. A portable calculator, computer display, mainboard, circuit board of radiogram, and a hygrometer could work normally after being treated by the plasma jet.展开更多
A complete control type plant factory has high efficiency in terms of cultivation area by constructing vertical multiple layered cultivation beds.However,it has a problem of irregular crop growth due to temperature de...A complete control type plant factory has high efficiency in terms of cultivation area by constructing vertical multiple layered cultivation beds.However,it has a problem of irregular crop growth due to temperature deviation at upper and lower beds and increases in energy consumption by a prolonged cultivation period.In this work,air flow rate inside a facility was improved by a hybrid control of air flow devices like air conditioning and air circulation fan with an established wireless sensor network to minimize temperature deviations between upper and lower beds and to promote crop growth.The performance of proposed system was verified with an experimental environment or Case A wherein air conditioning device was operated without a control algorithm and Case B wherein air conditioning and circulation fans were alternatively operated based on the hybrid control algorithm.After planting leafy vegetables under each experimental condition,crops were cultivated for 21 days.As a result,Case B wherein AC(air conditioning) and ACF(air-circulation fan) were alternatively operated based on the hybrid control algorithm showed that fresh mass,number of leaves,and leaf length for the crops grown were increased by 40.6%,41.1%,and 11.1%,respectively,compared to Case A.展开更多
The imaging mass spectrometry（IMS） technology has experienced a rapid development in recent years.A new IMS technology which is based on air flow assisted ionization（AFAI） was reported.It allows for the convenient...The imaging mass spectrometry（IMS） technology has experienced a rapid development in recent years.A new IMS technology which is based on air flow assisted ionization（AFAI） was reported.It allows for the convenient pretreatment of the samples and can image a large area of sample in a single measurement with high sensitivity.The AFAI in DESI mode was used as the ion source in this paper.The new IMS method is named AFADESI-IMS.The adoption of assisted air flow makes the sample pretreatment easy and convenient.An optimization of the distance between the ion transport tube and MS orifice increases the sensitivity of the system.For data processing,a program based on MATLAB with the function of numerical analysis was developed.A theoretical imaging resolution of a few hundred microns can be achieved.The composite AFAI-IMS images of different target analytes were imaged with high sensitivity.A typical AFAI-IMS image of the whole-body section of a rat was obtained in a single analytical measurement.The ability to image a large area for relevant samples in a single measurement with high sensitivity and repeatability is a significant advantage.The method has enormous potentials in the MS imaging of large and complicated samples.展开更多
Air flow control is one of the most important control methods for maintaining the stability and reliability of a fuel cell system, which can avoid oxygen starvation or oxygen saturation. The oxygen excess ratio （OER...Air flow control is one of the most important control methods for maintaining the stability and reliability of a fuel cell system, which can avoid oxygen starvation or oxygen saturation. The oxygen excess ratio （OER） is often used to indicate the air flow condition. Based on a fuel cell system model for vehicles, OER performance was analyzed for different stack currents and temperatures in this paper, and the results show that the optimal OER was affected weakly by the stack temperature. In order to ensure the system working in optimal OER, a control scheme that includes an optimal OER regulator and a fuzzy control was proposed. According to the stack current, a reference value of air flow rate was obtained with the optimal OER regulator and then the air compressor motor voltage was controlled with the fuzzy controller to adjust the air flow rate provided by the air compressor. Simulation results show that the control method has good dynamic and static characteristics.展开更多
Air DTH hammer has been successfully applied in minor-caliber solid mineral exploration,water-well drilling and other drilling areas. In order to expand the applications of the technology,the authors further studied t...Air DTH hammer has been successfully applied in minor-caliber solid mineral exploration,water-well drilling and other drilling areas. In order to expand the applications of the technology,the authors further studied the principle and analyzed the mechanism of reverse circulation drilling technique with air DTH hammer to get the perfect assembles of equipments by optimizing working parameters. No parameter seemed more important than the air volume because it could maintain the working performance stability. The minimum air volume is related to the parameters such as depth and pressure,which was calculated under the actual conditions. It was solved for the air injection flow tables of the air DTH Hammer working at the different pressures. According to the data tables,operators could adjust the air volume to meet the demand on this technique,which had a realistic guiding significance. So it could build up a set of systematic and complete hi-technique.展开更多
Vacuum precision seed metering is the key part of vacuum seed planter. Planting performance of planter is affected by vacuum and air flow which are important parameters for choosing fan. Effects of qualification perce...Vacuum precision seed metering is the key part of vacuum seed planter. Planting performance of planter is affected by vacuum and air flow which are important parameters for choosing fan. Effects of qualification percent and miss percent on air chamber vacuum 3, 4, 5 and 6 kPa were studied at different operating speeds. The results showed that operating performance of the seed metering was excellent when air chamber vacuum was 5 and 6 kPa, which air flow was 7.4-8.0 m3·s-1 and 8.0-8.8 m3·s-1 , respectively.展开更多
Objective To study the influence of unilateral air flow rate change on the result of caloric test.Materials and Methods The unilateral weakness(UW) index was calculated when the air flow rate was set at 6 L /min in bo...Objective To study the influence of unilateral air flow rate change on the result of caloric test.Materials and Methods The unilateral weakness(UW) index was calculated when the air flow rate was set at 6 L /min in both ears(called symmetric stimulation) and again when it was set at 6 L /min in left ear and 3 L /min in the right ear(called asymmetric stimulation).Each individual subject was tested with both symmetrical and asymmetrical stimulations.Paired t test was used to examine the differences between results from symmetrical and asymmetrical stimulations.Result UW index decreased in response to asymmetrical stimulation.Conclusion Unilaterally decreased air flow rate can produce indices suggesting ipsilateral UW,which can be misleading.展开更多
This paper proposes a numerical method for the study of ventilation efficiency in buildings. The developed model is validated with the experimental results of Nielsen who tested the isothermal flow in a scaled model o...This paper proposes a numerical method for the study of ventilation efficiency in buildings. The developed model is validated with the experimental results of Nielsen who tested the isothermal flow in a scaled model of a ventilated room. A zonal method is used to predict airflow patterns in the same ventilated room. The different equations governing the flow in the room were coded in Matlab for different operating conditions, different zonal configurations of the room and different number of cells （control volumes）. The efficiency of the ventilation was determined by calculating the number of ACH （air changes per hour） for each cell. The present results show the importance of the inlet air flow rate, the space resolution and the jet inlet dimensions on the determination of air quality.展开更多
The vortex formed around the rolling ball and the high pressure region formed around the ball-raceway contact zone are the principle factors that barricades the lubricant entering the bearing cavity, and further cause...The vortex formed around the rolling ball and the high pressure region formed around the ball-raceway contact zone are the principle factors that barricades the lubricant entering the bearing cavity, and further causes improper lubrication. The investigation of the air phase flow inside the bearing cavity is essential for the optimization of the oil-air two-phase lubrication method. With the revolutionary reference frame describing the bearing motion, a highly precise air phase flow model inside the angular contact ball bearing cavity was build up. Comprehensive factors such as bearing revolution, ball rotation, and cage structure were considered to investigate the influences on the air phase flow and heat transfer efficiency. The aerodynamic noise was also analyzed. The result shows that the ball spinning leads to the pressure rise and uneven pressure distribution. The air phase velocity, pressure and cage heat transfer efficiency increase as the revolving speed increases. The operating noise is largely due to the impact of the high speed external flow on the bearing. When the center of the oil-air outlet fixes near the inner ring, the aerodynamic noise is reduced. The position near the inner ring on the bigger axial side is the ideal position to fix the lubricating device for the angular contact ball bearing.展开更多
Mass spectrometry imaging (MSI) technology can simultaneously obtain the spatial distribution of thousands of chemical compounds and has unique advantages compared to other techniques that allow mapping the surface of...Mass spectrometry imaging (MSI) technology can simultaneously obtain the spatial distribution of thousands of chemical compounds and has unique advantages compared to other techniques that allow mapping the surface of bio-tissue. Here, we combined an air flow-assisted desorption electrospray ionization (AFADESI) MSI device with a high-resolution mass spectrometer to optimize the system parameters and achieve more accurate spatial distribution characteristics for compounds of interest while investigating bio-tissue sections. The platform set-up, required instrumentation, sample pretreatment, parameter optimization and bio-tissue characterization are described and discussed.Finally, the parameter conditions that can provide optimal ionic intensity and enhanced resolution were confirmed. The reasonable resolution and sensitivity improvements of AFADESI-MSI have been achieved through tandem a high-resolution mass spectrometer system, therefore, it would be a promising technique for the bio-tissue imaging analysis.展开更多
Air flow in nose and sinuses is studied by means of a simple model based on the steady-state ideal fluid flow assumption and repeated use of Bernoulli’s equation. In particular, by describing flow of air drawn in thr...Air flow in nose and sinuses is studied by means of a simple model based on the steady-state ideal fluid flow assumption and repeated use of Bernoulli’s equation. In particular, by describing flow of air drawn in through the vestibulumnasi during inspiration, we investigate how ventilation of the maxillary sinus is affected by surgical removal of part of the lateral walls of the nasal cavity close to the ostiummeatal complex. We find that, according to the model proposed, removal of tissues from this inner part of the nasal cavity may cause a decrease of the flux rate from the maxillary sinus.展开更多
New directives and increasing competition push automakers to get better performances (engine power increase), along with mass and size reduction (consumption). These evolutions lead to an increase of the thermal solic...New directives and increasing competition push automakers to get better performances (engine power increase), along with mass and size reduction (consumption). These evolutions lead to an increase of the thermal solicitations undergone by the automotive clutches whereas their weight must be decreased, as it is one of the main influent factors on CO2 emissions. Previous studies only focused on the air flow created by the clutches, but none of them have shown the impact of the clutch housing on the cooling of the clutch parts. In order to determine the influence of the clutch housing on the thermal behavior of automotive clutch systems, a numerical study has been performed on a simplified model of a clutch system. A parametric variation has been performed on the clutch housing size in order to evaluate its impact on the flow and the thermal behavior of clutches. The results show that clutch housing has a significant impact on the air flow and the thermal behavior of clutches. Thermal tests on real clutches with and without clutch housing have confirmed these results.展开更多
Air traffic flow management has been a major means for balancing air traffic demandand airport or airspace capacity to reduce congestion and flight delays.However,unpredictable fac-tors,such as weather and equipment m...Air traffic flow management has been a major means for balancing air traffic demandand airport or airspace capacity to reduce congestion and flight delays.However,unpredictable fac-tors,such as weather and equipment malfunctions,can cause dynamic changes in airport and sectorcapacity,resulting in significant alterations to optimized flight schedules and the calculated pre-departure slots.Therefore,taking into account capacity uncertainties is essential to create a moreresilient flight schedule.This paper addresses the flight pre-departure sequencing issue and intro-duces a capacity uncertainty model for optimizing flight schedule at the airport network level.The goal of the model is to reduce the total cost of flight delays while increasing the robustnessof the optimized schedule.A chance-constrained model is developed to address the capacity uncer-tainty of airports and sectors,and the significance of airports and sectors in the airport network isconsidered when setting the violation probability.The performance of the model is evaluated usingreal flight data by comparing them with the results of the deterministic model.The development ofthe model based on the characteristics of this special optimization mechanism can significantlyenhance its performance in addressing the pre-departure flight scheduling problem at the airportnetwork level.展开更多
Industry and energy continue to require piston engines(PICE)at a high level worldwide.Therefore,science and technology must urgently work on improving the PICE working cycle.Improving the quality of the intake process...Industry and energy continue to require piston engines(PICE)at a high level worldwide.Therefore,science and technology must urgently work on improving the PICE working cycle.Improving the quality of the intake process of theworking fluid into the cylinder is one of the most effective ways to improve the operational performance of PICE.The purpose of the study was to assess the impact of various cylinder head(CylH)designs on the gas-dynamic and heat-exchange qualities of air flows within an engine model’s intake system.Three different CylH designs were studied:the basic configuration and upgraded cylinder heads with a square valve and a square valve port.These designs are innovative.Laboratory conditions were used to conduct the studies for stationary air flow.The experiments covered the range of Reynolds numbers from 8500 to 96,000.The intake system’s gas dynamics and heat transfer were determined using the thermal anemometry method,which was based on constant-temperature hot-wire anemometers.It has been established that the use of upgraded CylHs causes an increase in the turbulence number of flow by an average of 13.5%.Additionally,itwas found that the increase in the turbulence number of flowin the cylinder is about 19%when installing new CylH designs.It was shown that therewas an increase in the heat transfer coefficient in the intake pipe by 10%–40%when installing modernized CylH designs in the intake system.The article focused on the problems of increasing the turbulence level and intensifying the heat transfer of stationary air flow in the intake system,specifically in PICEs.The study’s findings are novel in the areas of applied gas dynamics and PICEs.展开更多
As one of the core modules for air traffic flow management,Air Traffic Flow Prediction(ATFP)in the Multi-Airport System(MAS)is a prerequisite for demand and capacity balance in the complex meteorological environment.D...As one of the core modules for air traffic flow management,Air Traffic Flow Prediction(ATFP)in the Multi-Airport System(MAS)is a prerequisite for demand and capacity balance in the complex meteorological environment.Due to the challenge of implicit interaction mechanism among traffic flow,airspace capacity and weather impact,the Weather-aware ATFP(Wa-ATFP)is still a nontrivial issue.In this paper,a novel Multi-faceted Spatio-Temporal Graph Convolutional Network(MSTGCN)is proposed to address the Wa-ATFP within the complex operations of MAS.Firstly,a spatio-temporal graph is constructed with three different nodes,including airport,route,and fix to describe the topology structure of MAS.Secondly,a weather-aware multi-faceted fusion module is proposed to integrate the feature of air traffic flow and the auxiliary features of capacity and weather,which can effectively address the complex impact of severe weather,e.g.,thunderstorms.Thirdly,to capture the latent connections of nodes,an adaptive graph connection constructor is designed.The experimental results with the real-world operational dataset in Guangdong-Hong Kong-Macao Greater Bay Area,China,validate that the proposed approach outperforms the state-of-the-art machine-learning and deep-learning based baseline approaches in performance.展开更多
This paper introduces an innovative approach to the synchronized demand-capacity balance with special focus on sector capacity uncertainty within a centrally controlled collaborative air traffic flow management(ATFM)f...This paper introduces an innovative approach to the synchronized demand-capacity balance with special focus on sector capacity uncertainty within a centrally controlled collaborative air traffic flow management(ATFM)framework.Further with previous study,the uncertainty in capacity is considered as a non-negligible issue regarding multiple reasons,like the impact of weather,the strike of air traffic controllers(ATCOs),the military use of airspace and the spatiotemporal distribution of nonscheduled flights,etc.These recessive factors affect the outcome of traffic flow optimization.In this research,the focus is placed on the impact of sector capacity uncertainty on demand and capacity balancing(DCB)optimization and ATFM,and multiple options,such as delay assignment and rerouting,are intended for regulating the traffic flow.A scenario optimization method for sector capacity in the presence of uncertainties is used to find the approximately optimal solution.The results show that the proposed approach can achieve better demand and capacity balancing and determine perfect integer solutions to ATFM problems,solving large-scale instances(24 h on seven capacity scenarios,with 6255 flights and 8949 trajectories)in 5-15 min.To the best of our knowledge,our experiment is the first to tackle large-scale instances of stochastic ATFM problems within the collaborative ATFM framework.展开更多
Recently,multi-rotor unmanned aerial vehicle(UAV)becomes more and more significantly irreplaceable in the field of plant protection against diseases,pests and weeds of crops.The easy takeoff and landing performance,ho...Recently,multi-rotor unmanned aerial vehicle(UAV)becomes more and more significantly irreplaceable in the field of plant protection against diseases,pests and weeds of crops.The easy takeoff and landing performance,hover function and high spraying efficiency of UAV are urgently required to spray pesticide for crop timely and effectively,especially in dispersed plots and hilly mountains.In such situations,the current researches about UAV spray application mainly focus on studying the influence of the UAV spraying parameters on the droplet deposition,such as operation height,operation velocity and wind velocity.The deposition and distribution of pesticide droplets on crops which depends on installation position of nozzle and airflow distribution characteristics of UAV are directly related to the control effect of pesticide and crop growth in different growth periods.As a preliminary step,this study focuses on the dynamic development law and distribution characteristics of the downwash air flow for the SLK-5 six-rotor agricultural UAV.Based on compressible Reynolds-averaged Navier-Stokes(RANS)equations with an RNG k-εturbulence model and dynamic mesh technology,the efficient three-dimensional computational fluid dynamics(CFD)method was established to analyze the flow field distribution characteristics of UAV in hover.Then the unsteady interaction flow field of the wing was investigated in detail.The downwash wind speed of the marked points for the SLK-5 UAV in hover was also tested by weather tracker.It was found that the maximum velocity value of the downwash flow was close to 10 m/s;the z-direction velocity was the main body of the wind velocity in the downwash airflow,and the comparison of the wind velocity experiment test and simulation showed that the relative error was less than 12%between the experimental and simulated values of the z-direction velocity at the marked points.Then the flow characteristics of the longitudinal and cross section were analyzed in detail,the results obtained can be used as a reference for drift and sedimentation studies for multi-rotor unmanned aerial vehicle.展开更多
文摘By use of the two-layer adiabatic globe spectral model and the zonally averaged climatic data of winter season as initial values, 10-day integrations are carried out based on three kinds of model topography (i.e., (1) the averaged topography; (2) the envelope topography; (3) the modified envelope topography). The results show that the orography of the Northern Hemisphere plays an important role in the simulation of large-scale weather patterns in winter season. The simulation based on the envelope topography developed by Wallace et al. has some improvements in the Rocky Mountains area. But this scheme causes very serious horizontal expansion around the Tibetan Plateau (hereafter referred to as the TV). A modified envelope topography scheme has been worked out that increases the slope of the TP by decreasing the horizontal expansion while keeping the maximum altitude. The results show some improvements of the scheme around the TP. By analysis of the mechanical effects of the large-scale orography on the currents, the different forcings of the air flow over and around the TP and the Rocky Mountain (the RM) are investigated.
基金supported by the Shanghai Leading Academic Discipline Project(B604)the Henan Science and Technology Breakthrough Major Project(102102210440)+1 种基金the High School Funding Scheme for Key Young Teachersthe Education Department of Henan Province,2010
文摘A novel hood structure has been designed for the dust control system in the foundry in order to improve the working environment. A composite strategy has been applied for comparative analysis of the optimal venting volume and the airflow distribution between the conventional hood and the novel one in this study. A Computational Fluid Dynamic (CFD) method is used to simulate the airflow fields and dust-polluted air moving paths. The CFD results show that a two-outlet hood, with one outlet located on the left of the hood, is better for improving dust-polluted air than the hood with one outlet only. It can be concluded that the number of the outlets as well as their location on the hood has a significant influence on the air flow pattern in the hood. The optimal venting volume is also a major consideration that is discussed in the study. The venting volume should be designed by considering both the effective level of air flow velocity around the dust source and the energy saving. The optimal airflow distribution may reduce the turbulence in the hood system.
文摘An atmospheric pressure dielectric barrier discharge （DBD） plasma jet generator using air flow as the feedstock gas was applied to decontaminate the chemical agent surrogates on the surface of aluminum, stainless steel or iron plate painted with alkyd or PVC. The experi- mental results of material decontamination show that the residual chemical agent on the material is lower than the permissible value of the National Military Standard of China. In order to test the corrosion effect of the plasma jet on different material surfaces in the decontamination pro-cess, corrosion tests for the materials of polymethyl methacrylate, neoprene, polyvinyl chloride （PVC）, polyethylene （PE）, phenolic resin, iron plate painted with alkyd, stainless steel, aluminum, etc. were carried out, and relevant parameters were examined, including etiolation index, chroma- tism, loss of gloss, corrosion form, etc. The results show that the plasma jet is slightly corrosive for part of the materials, but their performances are not affected. A portable calculator, computer display, mainboard, circuit board of radiogram, and a hygrometer could work normally after being treated by the plasma jet.
基金Work(NRF-2012H1B8A2026145)supported by the Human Resource Training Program for Regional Innovation through the Ministry of Education and National Research Foundation of KoreaProject(2015K000281)supported by the Functional Districts of the Science Belt Support Program,Ministry of Science,ICT and Future Planning,Korea
文摘A complete control type plant factory has high efficiency in terms of cultivation area by constructing vertical multiple layered cultivation beds.However,it has a problem of irregular crop growth due to temperature deviation at upper and lower beds and increases in energy consumption by a prolonged cultivation period.In this work,air flow rate inside a facility was improved by a hybrid control of air flow devices like air conditioning and air circulation fan with an established wireless sensor network to minimize temperature deviations between upper and lower beds and to promote crop growth.The performance of proposed system was verified with an experimental environment or Case A wherein air conditioning device was operated without a control algorithm and Case B wherein air conditioning and circulation fans were alternatively operated based on the hybrid control algorithm.After planting leafy vegetables under each experimental condition,crops were cultivated for 21 days.As a result,Case B wherein AC(air conditioning) and ACF(air-circulation fan) were alternatively operated based on the hybrid control algorithm showed that fresh mass,number of leaves,and leaf length for the crops grown were increased by 40.6%,41.1%,and 11.1%,respectively,compared to Case A.
基金financially supported by the National Instrumentation Program (No. 2011YQ17006702)the National Natural Science Foundation of China (No. 21027013 and No. 81102413)Fundamental Research Program of Shenzhen (No. JC201005280634A)
文摘The imaging mass spectrometry（IMS） technology has experienced a rapid development in recent years.A new IMS technology which is based on air flow assisted ionization（AFAI） was reported.It allows for the convenient pretreatment of the samples and can image a large area of sample in a single measurement with high sensitivity.The AFAI in DESI mode was used as the ion source in this paper.The new IMS method is named AFADESI-IMS.The adoption of assisted air flow makes the sample pretreatment easy and convenient.An optimization of the distance between the ion transport tube and MS orifice increases the sensitivity of the system.For data processing,a program based on MATLAB with the function of numerical analysis was developed.A theoretical imaging resolution of a few hundred microns can be achieved.The composite AFAI-IMS images of different target analytes were imaged with high sensitivity.A typical AFAI-IMS image of the whole-body section of a rat was obtained in a single analytical measurement.The ability to image a large area for relevant samples in a single measurement with high sensitivity and repeatability is a significant advantage.The method has enormous potentials in the MS imaging of large and complicated samples.
基金supported by the National Natural Science Foundation of China (No. 51177138)the Research Fund for the Doctoral Program of High Education of China (No.20100184110015)Sichuan Province International Technology Cooperation and Exchange Program (No. 2012HH0007)
文摘Air flow control is one of the most important control methods for maintaining the stability and reliability of a fuel cell system, which can avoid oxygen starvation or oxygen saturation. The oxygen excess ratio （OER） is often used to indicate the air flow condition. Based on a fuel cell system model for vehicles, OER performance was analyzed for different stack currents and temperatures in this paper, and the results show that the optimal OER was affected weakly by the stack temperature. In order to ensure the system working in optimal OER, a control scheme that includes an optimal OER regulator and a fuzzy control was proposed. According to the stack current, a reference value of air flow rate was obtained with the optimal OER regulator and then the air compressor motor voltage was controlled with the fuzzy controller to adjust the air flow rate provided by the air compressor. Simulation results show that the control method has good dynamic and static characteristics.
基金supported by the project of the feasibility study on air reverse circulation drilling system,research foundation for out standingteachers,Jilin University(No.2006220100003435)
文摘Air DTH hammer has been successfully applied in minor-caliber solid mineral exploration,water-well drilling and other drilling areas. In order to expand the applications of the technology,the authors further studied the principle and analyzed the mechanism of reverse circulation drilling technique with air DTH hammer to get the perfect assembles of equipments by optimizing working parameters. No parameter seemed more important than the air volume because it could maintain the working performance stability. The minimum air volume is related to the parameters such as depth and pressure,which was calculated under the actual conditions. It was solved for the air injection flow tables of the air DTH Hammer working at the different pressures. According to the data tables,operators could adjust the air volume to meet the demand on this technique,which had a realistic guiding significance. So it could build up a set of systematic and complete hi-technique.
基金Supported by the Youth Science Foundation of Heilongjiang(QC2010119,QC2010028)the Science and Technology Innovation Person with Ability Study Special Foundation Project of Harbin(2011RFQXN054)+1 种基金the Graduate Student Innovative Scientific Research Project of Heilongjiang(YJSCX2011-064JHL)Division of Soybean Machinery,CARS(nycytx-004)
文摘Vacuum precision seed metering is the key part of vacuum seed planter. Planting performance of planter is affected by vacuum and air flow which are important parameters for choosing fan. Effects of qualification percent and miss percent on air chamber vacuum 3, 4, 5 and 6 kPa were studied at different operating speeds. The results showed that operating performance of the seed metering was excellent when air chamber vacuum was 5 and 6 kPa, which air flow was 7.4-8.0 m3·s-1 and 8.0-8.8 m3·s-1 , respectively.
文摘Objective To study the influence of unilateral air flow rate change on the result of caloric test.Materials and Methods The unilateral weakness(UW) index was calculated when the air flow rate was set at 6 L /min in both ears(called symmetric stimulation) and again when it was set at 6 L /min in left ear and 3 L /min in the right ear(called asymmetric stimulation).Each individual subject was tested with both symmetrical and asymmetrical stimulations.Paired t test was used to examine the differences between results from symmetrical and asymmetrical stimulations.Result UW index decreased in response to asymmetrical stimulation.Conclusion Unilaterally decreased air flow rate can produce indices suggesting ipsilateral UW,which can be misleading.
文摘This paper proposes a numerical method for the study of ventilation efficiency in buildings. The developed model is validated with the experimental results of Nielsen who tested the isothermal flow in a scaled model of a ventilated room. A zonal method is used to predict airflow patterns in the same ventilated room. The different equations governing the flow in the room were coded in Matlab for different operating conditions, different zonal configurations of the room and different number of cells （control volumes）. The efficiency of the ventilation was determined by calculating the number of ACH （air changes per hour） for each cell. The present results show the importance of the inlet air flow rate, the space resolution and the jet inlet dimensions on the determination of air quality.
基金Project(2011CB706606) supported by the National Basic Research of ChinaProject(51405375) supported by the National Natural Science Foundation of China
文摘The vortex formed around the rolling ball and the high pressure region formed around the ball-raceway contact zone are the principle factors that barricades the lubricant entering the bearing cavity, and further causes improper lubrication. The investigation of the air phase flow inside the bearing cavity is essential for the optimization of the oil-air two-phase lubrication method. With the revolutionary reference frame describing the bearing motion, a highly precise air phase flow model inside the angular contact ball bearing cavity was build up. Comprehensive factors such as bearing revolution, ball rotation, and cage structure were considered to investigate the influences on the air phase flow and heat transfer efficiency. The aerodynamic noise was also analyzed. The result shows that the ball spinning leads to the pressure rise and uneven pressure distribution. The air phase velocity, pressure and cage heat transfer efficiency increase as the revolving speed increases. The operating noise is largely due to the impact of the high speed external flow on the bearing. When the center of the oil-air outlet fixes near the inner ring, the aerodynamic noise is reduced. The position near the inner ring on the bigger axial side is the ideal position to fix the lubricating device for the angular contact ball bearing.
基金supported by the National Instrumentation Program (No. 2016YFF0100304)the National Natural Science Foundation of China(Nos. 21335007, 81773678)+1 种基金the CAMS Innovation Fund for Medical Sciences(No. 2016-12 M-1-009)PUMC Youth Fund and the Fundamental Research Funds for the Central Universities(No. 3332015177)
文摘Mass spectrometry imaging (MSI) technology can simultaneously obtain the spatial distribution of thousands of chemical compounds and has unique advantages compared to other techniques that allow mapping the surface of bio-tissue. Here, we combined an air flow-assisted desorption electrospray ionization (AFADESI) MSI device with a high-resolution mass spectrometer to optimize the system parameters and achieve more accurate spatial distribution characteristics for compounds of interest while investigating bio-tissue sections. The platform set-up, required instrumentation, sample pretreatment, parameter optimization and bio-tissue characterization are described and discussed.Finally, the parameter conditions that can provide optimal ionic intensity and enhanced resolution were confirmed. The reasonable resolution and sensitivity improvements of AFADESI-MSI have been achieved through tandem a high-resolution mass spectrometer system, therefore, it would be a promising technique for the bio-tissue imaging analysis.
文摘Air flow in nose and sinuses is studied by means of a simple model based on the steady-state ideal fluid flow assumption and repeated use of Bernoulli’s equation. In particular, by describing flow of air drawn in through the vestibulumnasi during inspiration, we investigate how ventilation of the maxillary sinus is affected by surgical removal of part of the lateral walls of the nasal cavity close to the ostiummeatal complex. We find that, according to the model proposed, removal of tissues from this inner part of the nasal cavity may cause a decrease of the flux rate from the maxillary sinus.
文摘New directives and increasing competition push automakers to get better performances (engine power increase), along with mass and size reduction (consumption). These evolutions lead to an increase of the thermal solicitations undergone by the automotive clutches whereas their weight must be decreased, as it is one of the main influent factors on CO2 emissions. Previous studies only focused on the air flow created by the clutches, but none of them have shown the impact of the clutch housing on the cooling of the clutch parts. In order to determine the influence of the clutch housing on the thermal behavior of automotive clutch systems, a numerical study has been performed on a simplified model of a clutch system. A parametric variation has been performed on the clutch housing size in order to evaluate its impact on the flow and the thermal behavior of clutches. The results show that clutch housing has a significant impact on the air flow and the thermal behavior of clutches. Thermal tests on real clutches with and without clutch housing have confirmed these results.
基金supported by the National Natural Science Foundation of China(Nos.U2033203,U1833126,61773203,61304190)。
文摘Air traffic flow management has been a major means for balancing air traffic demandand airport or airspace capacity to reduce congestion and flight delays.However,unpredictable fac-tors,such as weather and equipment malfunctions,can cause dynamic changes in airport and sectorcapacity,resulting in significant alterations to optimized flight schedules and the calculated pre-departure slots.Therefore,taking into account capacity uncertainties is essential to create a moreresilient flight schedule.This paper addresses the flight pre-departure sequencing issue and intro-duces a capacity uncertainty model for optimizing flight schedule at the airport network level.The goal of the model is to reduce the total cost of flight delays while increasing the robustnessof the optimized schedule.A chance-constrained model is developed to address the capacity uncer-tainty of airports and sectors,and the significance of airports and sectors in the airport network isconsidered when setting the violation probability.The performance of the model is evaluated usingreal flight data by comparing them with the results of the deterministic model.The development ofthe model based on the characteristics of this special optimization mechanism can significantlyenhance its performance in addressing the pre-departure flight scheduling problem at the airportnetwork level.
文摘Industry and energy continue to require piston engines(PICE)at a high level worldwide.Therefore,science and technology must urgently work on improving the PICE working cycle.Improving the quality of the intake process of theworking fluid into the cylinder is one of the most effective ways to improve the operational performance of PICE.The purpose of the study was to assess the impact of various cylinder head(CylH)designs on the gas-dynamic and heat-exchange qualities of air flows within an engine model’s intake system.Three different CylH designs were studied:the basic configuration and upgraded cylinder heads with a square valve and a square valve port.These designs are innovative.Laboratory conditions were used to conduct the studies for stationary air flow.The experiments covered the range of Reynolds numbers from 8500 to 96,000.The intake system’s gas dynamics and heat transfer were determined using the thermal anemometry method,which was based on constant-temperature hot-wire anemometers.It has been established that the use of upgraded CylHs causes an increase in the turbulence number of flow by an average of 13.5%.Additionally,itwas found that the increase in the turbulence number of flowin the cylinder is about 19%when installing new CylH designs.It was shown that therewas an increase in the heat transfer coefficient in the intake pipe by 10%–40%when installing modernized CylH designs in the intake system.The article focused on the problems of increasing the turbulence level and intensifying the heat transfer of stationary air flow in the intake system,specifically in PICEs.The study’s findings are novel in the areas of applied gas dynamics and PICEs.
基金supported by the National Key Research and Development Program of China(No.2022YFB2602402)the National Natural Science Foundation of China(Nos.U2033215 and U2133210).
文摘As one of the core modules for air traffic flow management,Air Traffic Flow Prediction(ATFP)in the Multi-Airport System(MAS)is a prerequisite for demand and capacity balance in the complex meteorological environment.Due to the challenge of implicit interaction mechanism among traffic flow,airspace capacity and weather impact,the Weather-aware ATFP(Wa-ATFP)is still a nontrivial issue.In this paper,a novel Multi-faceted Spatio-Temporal Graph Convolutional Network(MSTGCN)is proposed to address the Wa-ATFP within the complex operations of MAS.Firstly,a spatio-temporal graph is constructed with three different nodes,including airport,route,and fix to describe the topology structure of MAS.Secondly,a weather-aware multi-faceted fusion module is proposed to integrate the feature of air traffic flow and the auxiliary features of capacity and weather,which can effectively address the complex impact of severe weather,e.g.,thunderstorms.Thirdly,to capture the latent connections of nodes,an adaptive graph connection constructor is designed.The experimental results with the real-world operational dataset in Guangdong-Hong Kong-Macao Greater Bay Area,China,validate that the proposed approach outperforms the state-of-the-art machine-learning and deep-learning based baseline approaches in performance.
文摘This paper introduces an innovative approach to the synchronized demand-capacity balance with special focus on sector capacity uncertainty within a centrally controlled collaborative air traffic flow management(ATFM)framework.Further with previous study,the uncertainty in capacity is considered as a non-negligible issue regarding multiple reasons,like the impact of weather,the strike of air traffic controllers(ATCOs),the military use of airspace and the spatiotemporal distribution of nonscheduled flights,etc.These recessive factors affect the outcome of traffic flow optimization.In this research,the focus is placed on the impact of sector capacity uncertainty on demand and capacity balancing(DCB)optimization and ATFM,and multiple options,such as delay assignment and rerouting,are intended for regulating the traffic flow.A scenario optimization method for sector capacity in the presence of uncertainties is used to find the approximately optimal solution.The results show that the proposed approach can achieve better demand and capacity balancing and determine perfect integer solutions to ATFM problems,solving large-scale instances(24 h on seven capacity scenarios,with 6255 flights and 8949 trajectories)in 5-15 min.To the best of our knowledge,our experiment is the first to tackle large-scale instances of stochastic ATFM problems within the collaborative ATFM framework.
基金acknowledge the financial support provided by the National Key Research and Development Plan of China(No.2016YFD0200702)Study on Key Techniques of Aviation Plant Protection for Rice Diseases and Insect Pests of China(No.S201729)+1 种基金Open exchange project of China-US pesticide technology Joint Research Center(No.Y2017PT32)Aviation intelligent pesticide operation system based on Beidou automatic navigation(No.S201609).
文摘Recently,multi-rotor unmanned aerial vehicle(UAV)becomes more and more significantly irreplaceable in the field of plant protection against diseases,pests and weeds of crops.The easy takeoff and landing performance,hover function and high spraying efficiency of UAV are urgently required to spray pesticide for crop timely and effectively,especially in dispersed plots and hilly mountains.In such situations,the current researches about UAV spray application mainly focus on studying the influence of the UAV spraying parameters on the droplet deposition,such as operation height,operation velocity and wind velocity.The deposition and distribution of pesticide droplets on crops which depends on installation position of nozzle and airflow distribution characteristics of UAV are directly related to the control effect of pesticide and crop growth in different growth periods.As a preliminary step,this study focuses on the dynamic development law and distribution characteristics of the downwash air flow for the SLK-5 six-rotor agricultural UAV.Based on compressible Reynolds-averaged Navier-Stokes(RANS)equations with an RNG k-εturbulence model and dynamic mesh technology,the efficient three-dimensional computational fluid dynamics(CFD)method was established to analyze the flow field distribution characteristics of UAV in hover.Then the unsteady interaction flow field of the wing was investigated in detail.The downwash wind speed of the marked points for the SLK-5 UAV in hover was also tested by weather tracker.It was found that the maximum velocity value of the downwash flow was close to 10 m/s;the z-direction velocity was the main body of the wind velocity in the downwash airflow,and the comparison of the wind velocity experiment test and simulation showed that the relative error was less than 12%between the experimental and simulated values of the z-direction velocity at the marked points.Then the flow characteristics of the longitudinal and cross section were analyzed in detail,the results obtained can be used as a reference for drift and sedimentation studies for multi-rotor unmanned aerial vehicle.
