Self-designed Al8Si0.4Mg0.4Fe aluminium alloy was modified with Sr,followed by solid solution and aging treatments to regulate its microstructure and mechanical/electrical properties.The results show that after the mo...Self-designed Al8Si0.4Mg0.4Fe aluminium alloy was modified with Sr,followed by solid solution and aging treatments to regulate its microstructure and mechanical/electrical properties.The results show that after the modification treatment,the room-temperature tensile strength of the alloy remains nearly unchanged,the elongation at break slightly increases from 1.82%to 3.34%,and the electrical conductivity significantly increases from 40.1%international annealed copper standard(IACS)to 42.0%IACS.After the modification,the alloy was subjected to solid solution treatment at 515℃for 8 h,followed by aging treatment at 180,200,220 and 240℃for 6 h.With increasing aging temperature,the electrical conductivity increases monotonously from 41.4%IACS to 45.5%IACS,while the room-temperature tensile strength initially increases and then decreases.At 200℃,the alloy achieves an optimal balance between electrical conductivity and room-temperature tensile strength:the electrical conductivity is 42.5%IACS,and the room-temperature tensile strength is 282.9 MPa.When the aging temperature continues to rise,the alloy undergoes overaging.Although the conductivity continues to increase,the room-temperature tensile strength drops sharply,and it is only 177.1 MPa at 240℃.展开更多
The pronounced anisotropy in mechanical properties presents a major obstacle to the extensive application of aluminum-lithium(Al-Li)alloys,primarily attributed to heterogeneous precipitate distribution,grain structure...The pronounced anisotropy in mechanical properties presents a major obstacle to the extensive application of aluminum-lithium(Al-Li)alloys,primarily attributed to heterogeneous precipitate distribution,grain structure variations,and crystallographic texture.This study investigates the impact of pre-thermal treatment prior to hot rolling and aging treatment on the anisotropy of mechanical properties of 2195 alloy sheet fabricated by gas atomization,hot pressing and hot rolling.The results demonstrate that pre-treatment at 450℃for 4 h promotes finer and more uniform distribution of precipitates,effectively mitigating mechanical anisotropy of the alloy sheet.Additionally,this treatment facilitates recrystallization during hot rolling,further reducing mechanical anisotropy.The in-plane anisotropy(IPA)factors for ultimate tensile strength(UTS)and yield strength(YS)are 1.15%and 0.77%,respectively.Subsequent aging treatment enhances grain refinement and the uniformity of the T_(1) phase,suppresses the formation of precipitation-free zones(PFZs),significantly improving the strength and toughness of the alloy sheet.After peak aging at 165℃for 48 h,the alloy sheet exhibits YS of 547 MPa,UTS of 590 MPa,and elongation(EL)of 7.7%.展开更多
The bending collapse and energy absorption of 7003 aluminum alloy bumper beams under four aging conditions(pre-aging,under-aging,peak-aging,and over-aging)were investigated through three-point bending tests.Microstruc...The bending collapse and energy absorption of 7003 aluminum alloy bumper beams under four aging conditions(pre-aging,under-aging,peak-aging,and over-aging)were investigated through three-point bending tests.Microstructural characterization was performed using scanning electron microscopy and transmission electron microscopy.Based on the Swift−Hockett−Sherby constitutive model combined with the Gurson−Tvergaard−Needleman damage model,the plastic response and fracture behavior of the 7003 aluminum alloy under uniaxial tension and three-point bending were accurately predicted.The results showed that the peak bending force of the beams was proportional to the strength under different aging states,while stress triaxiality governed the cracking failure.Pre-aged and under-aged beams resisted cracking until reaching 250 mm displacement due to stress transition from tensile to compression on the bottom surface.The under-aged beam exhibited optimal energy absorption(7.86 kJ)and a higher peak force(38.75 kN).展开更多
The impact of cryorolling(CR)and room temperature rolling(RTR)followed by artificial aging on the corrosion characteristics of 2195 Al−Li alloy(AA2195)was studied.Transmission electron microscope,scanning electron mic...The impact of cryorolling(CR)and room temperature rolling(RTR)followed by artificial aging on the corrosion characteristics of 2195 Al−Li alloy(AA2195)was studied.Transmission electron microscope,scanning electron microscope,optical microscope,intergranular corrosion experiment,and electrochemical experiment were used.Throughout different stages of aging treatment,the corrosion behavior of both CR and RTR samples exhibited a sequential progression of pitting corrosion,followed by intergranular corrosion,and then pitting corrosion again.The corrosion rates of both samples initially showed an increase,followed by a gradual stabilization over time.The size and density of T1 phase significantly influenced the corrosion performance of the alloy.During the peak aging and over-aging stages,the CR sample exhibited superior corrosion resistance to the RTR sample,attributed to its finer T1 phase.展开更多
Many studies have investigated the selective laser melting(SLM)of AlSi10Mg and AlSi7Mg alloys,but there are still lack of researches focused on Al-Si-Mg alloys specifically tailored for SLM.In this work,a novel high M...Many studies have investigated the selective laser melting(SLM)of AlSi10Mg and AlSi7Mg alloys,but there are still lack of researches focused on Al-Si-Mg alloys specifically tailored for SLM.In this work,a novel high Mg-content AlSi8Mg3 alloy was specifically designed for SLM.The results showed that this new alloy exhibited excellent SLM processability with a lowest porosity of 0.07%.Massive lattice distortion led to a high Vickers hardness in samples fabricated at a high laser power due to the precipitation of Mg_(2)Si nanoparticles from theα-Al matrix induced by high-intensity intrinsic heat treatment during SLM.The maximum microhardness and compressive yield strength of the alloy reached HV(211±4)and(526±12)MPa,respectively.After aging treatment at 150℃,the maximum microhardness and compressive yield strength of the samples were further improved to HV(221±4)and(577±5)MPa,respectively.These values are higher than those of most known aluminum alloys fabricated by SLM.This paper provides a new idea for optimizing the mechanical properties of Al-Si-Mg alloys fabricated using SLM.展开更多
High-resolution transmission electron microscopy(TEM),X-ray diffractometer(XRD),and hardness test were used to study the evolution of long plate-shaped S'phase in the spray-formed fine-grained Al−Cu−Mg alloy durin...High-resolution transmission electron microscopy(TEM),X-ray diffractometer(XRD),and hardness test were used to study the evolution of long plate-shaped S'phase in the spray-formed fine-grained Al−Cu−Mg alloy during aging after rapid cold punching deformation.Results show that the long plate-shaped S'phase in the extruded Al−Cu−Mg alloy undergoes evident distortion,brittle failure,separation and redissolution,during rapid cold punching deformation,leading to the transformation of long plate-shaped S'phase into short rod or even redissolution and disappearance,causing the matrix to become a supersaturated solid solution.After the aging treatment,the reprecipitation of the phases occurs,and these aging phases are mainly long plate-shaped and granular.The incompletely dissolved S'phase acts as nucleation core,promoting uphill diffusion of the surrounding solute atoms.The S'phase gradually grows with increasing the aging time.The completely dissolved S'phase forms the incoherent equilibrium phase with the matrix to reduce its free energy.After rapid cold punching,the aging response of the deformed Al−Cu−Mg alloy is accelerated,and the hardness of the alloy is substantially increased.展开更多
Cr25Ni35Nb and Cr35Ni45Nb alloys are usually used in the ethylene cracking furnaces. However, premature failure of furnace tubes often occurs ahead of design life due to elevated temperature exposure conditions （1050...Cr25Ni35Nb and Cr35Ni45Nb alloys are usually used in the ethylene cracking furnaces. However, premature failure of furnace tubes often occurs ahead of design life due to elevated temperature exposure conditions （1050-1100 ℃） and aggressive service environment. Effects of exposure temperature and time on microstructure and mechanical properties of Cr25Ni35Nb and Cr35Ni45Nb steel at aging temperature （1200 ℃） with various exposure time were simulated different service times at 1050 ℃. Change of mechanical properties at room temperature and elevated temperature （900 ℃） of the aged Cr25Ni35Nb and Cr35Ni45Nb steel were investigated. Under exposure at 1200 ℃, ultimate tensile and yield strength, elongation of Cr35Ni45Nb steel increase initially and then decrease, however, strength and ductility of Cr25Ni35Nb steel decrease with aging time increasing. Large amount of fine secondary carbide particles precipitated and dispersed in matrix of Cr35Ni45Nb steel, which increased strength and ductility for dispersion strengthening. However, the effect of the dispersion strengthening is weakened by needle-like secondary carbides. Strength and ductility decreased with fine secondary carbide particles growing. For Cr25Ni35Nb steel, few fine secondary carbide particles precipitated and dispersed in the matrix, and needle-like secondary carbides generated in the matrix, which causes strength and ductility decreased with aging time increasing.展开更多
Direct aging treatment is an important post-processing procedure,yet little research has been done on how it balances the mechanical properties and the stress removal for selective laser melted(SLMed)AlSi10Mg alloys.H...Direct aging treatment is an important post-processing procedure,yet little research has been done on how it balances the mechanical properties and the stress removal for selective laser melted(SLMed)AlSi10Mg alloys.Here,we proposed a typical direct aging treatment on SLMed AlSi10Mg alloys,and studied the effects on their microstructure,properties and residual stress evolution.The results indi-cate that the as-built microstructure is mainly composed of fine cellularα-Al and reticulated Si phases,and some pre-existing precipitates and dislocations are found in these cells.The direct aging treatment promotes the precipitation of nano-scaled Si phases and preserves a network-like Si structure.Therefore,the strength of the peak-aged alloy increases while the ductility decreases.As the aging temperature in-creases from 160 to 200℃,aging hardening behavior was accelerated significantly.Aging at 160℃ for 4-9 h removes 32.0%-43.0%of the residual stress,which is attributed to the decomposition of the su-persaturatedα-Al matrix,the precipitation of the nano-Si phase and the exposure of low-angle grain boundaries(LAGBs).Considering the overal alloy performance obtained,over-aging at 160℃ for 4 h is the optimized heat treatment regime.Under this condition,the yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)of the alloy in the transverse and longitudinal direction are 309.5 MPa,464.4 MPa and 8.3%and 286.4 MPa,464.9 MPa and 5.1%,respectively.展开更多
The effect of aging treatment on the microstructure and corrosion behavior of a Fe-18Cr-15Mn-0.66N high-nitrogen stainless steel(HNSS) in 3.5 wt.% Na Cl solution was investigated using a series of electrochemical test...The effect of aging treatment on the microstructure and corrosion behavior of a Fe-18Cr-15Mn-0.66N high-nitrogen stainless steel(HNSS) in 3.5 wt.% Na Cl solution was investigated using a series of electrochemical tests, scanning electronic microscopy(SEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). The results showed that the aging treatment led to the precipitation of CrN particles along the grain boundaries and their morphologies changed from dispersive particles to continuous network as the aging time increased up to 60 min. Aging time had minor effects on the corrosion potential and corrosion current density, but resulted in the sharp decrease in the pitting corrosion potential.The passive film behaved as a n-type semiconductor, and the donor density of the passive film increased with the aging time. Meanwhile, the fraction of stable oxide(CrO) in the passive film decreased with the aging time. It demonstrates that the aging treatment deteriorated the protectiveness of the passive film, hence weakened the corrosion resistance of HNSS.展开更多
The present study proposes a methodology for predicting the mechanical properties of AZ61 and AZ91alloys associated with microstructure,texture and aging parameters and estimating predictor importance.For this,we inve...The present study proposes a methodology for predicting the mechanical properties of AZ61 and AZ91alloys associated with microstructure,texture and aging parameters and estimating predictor importance.For this,we investigate quantitative correlations between microstructure,texture and mechanical properties of aged AZ61 and AZ91 rods through machine learning.This regression analysis focuses on the precipitation behavior of Mg17Al12as the main second phase of Mg-Al-Zn alloys with respect to aging conditions.To simplify data generation,only SEM images were used to quantify the features of discontinuous and continuous precipitates.To overcome the lack of data and make the most of the measured data,we devised a method to extend the existing dataset by a factor of 9 using the mean and standard deviation of the measured data.Artificial neural networks predicted tensile and compressive yield strengths and resultant yield asymmetry with a high accuracy of over 98%using 11 predictors for a total of 288datasets.Decision tree learning quantitatively assessed the importance of predictors in determining the mechanical properties of aged AZ61 and AZ91 rods.展开更多
The microstructure and corrosion behavior of Al-Zn-Mg alloy(namely 7×××)after natural aging treatment(NAT)and artificial aging treatment(AAT)in aqueous NaCl solutions containing different aggressive ion...The microstructure and corrosion behavior of Al-Zn-Mg alloy(namely 7×××)after natural aging treatment(NAT)and artificial aging treatment(AAT)in aqueous NaCl solutions containing different aggressive ions have been investigated in current work.Results of microstructure characterization demonstrate that the aging treatment has a great influence on the grain size and precipitates.The grain size is relatively sizeable and no evident precipitates are observed in alloy after NAT comparable with that after AAT.The electrochemical corrosion behavior of alloy was studied by polarization curve and electrochemical impedance spectroscopy(EIS).The corrosion potential(E_(corr))of the aluminum alloy is more negative in 3.5 wt.%NaCl containing 0.052 wt.%NaHSO_(3)solution than that in 3.5 wt.%NaCl solutions with or without 0.907 wt.%NaHCO_(3).Charge transfer resistance(Rct)results reveal that alloy after AAT has an enhancement of corrosion resistance compare with that after NAT.With the immersion time increasing,mostly pitting spreads over the surface of the alloy only in NaCl solution,whereas exfoliation corrosion mainly occurs in NaCl solutions containing NaHSO_(3)or NaHCO_(3).展开更多
The influence of aging treatment on transformation behavior and shape memory of the Ti 50_x Ni_(48) Fe_2 Nb_x(x=0,0.6,0.8,1.0,and 1.2) alloys was investigated using differential scanning calorimeter(DSC),mechanical dr...The influence of aging treatment on transformation behavior and shape memory of the Ti 50_x Ni_(48) Fe_2 Nb_x(x=0,0.6,0.8,1.0,and 1.2) alloys was investigated using differential scanning calorimeter(DSC),mechanical drawing machine,and microhardness tester in this paper.It is indicated that the aging treatment has a significant effect on the phase transformation temperatures(M_s,M_f,M_p,A_s,A_f,and A_p) and microhardness of the samples.The phase transformation temperatures are found to decrease initially with the increasing aging temperature from 300 to 500 ℃ and increase with further increase of the aging temperature.The aging treatment at intermediate temperature between 400 and 500 ℃ results in an improved shape memory effect.In addition,the highest microhardness value is also obtained.展开更多
In this study, the precipitation transformation and age hardening of solution-treated Mg-9Gd-4Y-2Zn-0.5Zr(wt.%) alloy were investigated at different aging treatment parameters. The precipitation sequences of the alloy...In this study, the precipitation transformation and age hardening of solution-treated Mg-9Gd-4Y-2Zn-0.5Zr(wt.%) alloy were investigated at different aging treatment parameters. The precipitation sequences of the alloy aged at 200℃, 250℃ and 300℃ are β’’(DO19) → β’(BCO) → β(FCC), β’’(DO19) → β’(BCO) → β_(1)(FCC) → β(FCC) and β(FCC), respectively. The streaks sequences of the alloy aged at 200℃, 250℃ and 300℃ are SF, SF → 14H-LPSO and SF → 14H-LPSO, respectively. For the alloy aged at 200℃ and 250℃, the increase in hardness with increasing aging time is contributed from the increase in precipitate volume fraction and the transformation from β’’ to β’ phase with basal → prismatic and spherical → spindle-like precipitate changes. The decrease in hardness after the peak-aging stage is attributed to the appearance of micro-sized β precipitates. Because of the smaller size of precipitates and the triangular arrangement of β’ precipitate, the hardness of the alloy aged at 200℃ is higher than that aged at 250℃. For the alloy aged at 300℃, the appearance of only micro-sized β precipitate and its coarsening with increasing aging time leads to the lowest hardness and an overall decrease in hardness with the aging time.展开更多
The influence of oxygen（O） content on the microstructure and mechanical properties of cold rolled Ti-32.5 Nb-6.8 Zr-2.7 Sn-xO（TNZS-xO; x = 0,0.3.0.6; mass%） alloys after aging at temperature range from 350 to 600...The influence of oxygen（O） content on the microstructure and mechanical properties of cold rolled Ti-32.5 Nb-6.8 Zr-2.7 Sn-xO（TNZS-xO; x = 0,0.3.0.6; mass%） alloys after aging at temperature range from 350 to 600℃ for 24 h was investigated. Results showed that the cold rolled TNZS-xO alloys possess single βphase. During the aging process, O could not only effectively suppress the precipitation of ω phase but also retard the formation and decomposition of a phase. In addition, the corresponding temperatures of the maximal volume fraction of α phase precipitation and the（α＋β）/β transus temperatures of the TNZS-xO alloys were all increased with the increasing of O content. For mechanical properties, it was found that the strength and Young＇s modulus of the TNZS-xO alloys increased owing to the ω phase and/or a phase precipitation and decreased owing to the a phase decomposition. However, the elongation showed the opposite change tendency with the above mentioned strength. The mechanical properties of TNZS-xO alloys can be controlled over a wide range by subjecting to aging treatment and/or changing their 0 content. When aged at or below 450 ℃,the TNZS-xO alloys exhibit great potential to become a series of new candidates for biomedical applications since they possess high strength（870-1460 MPa）, low Young＇s modulus（45.1-75.6 GPa）, high strength-to-modulus ratio（0.018-0.02） and appropriate elongation（7.2%-14.9%）, which are superior to those of Ti-6 Al-4 V alloy and suitable for the use as bio-implant materials.展开更多
In order to study the effects of aging treatment on the intergranular corrosion（IGC） and stress corrosion cracking（SCC） of 7003 aluminum alloy（AA7003）, the intergranular corrosion test, electrochemical test and ...In order to study the effects of aging treatment on the intergranular corrosion（IGC） and stress corrosion cracking（SCC） of 7003 aluminum alloy（AA7003）, the intergranular corrosion test, electrochemical test and slow strain rate test（SSRT）, combined with optical microscopy（OM） and scanning electron microscopy（SEM） as well as transmission electron microscopy（TEM） observations have been carried out. The IGC and electrochemical test results showed that the IGC resistance of AA7003 for peak aged（PA） temper is the lowest, with double peak aged（DPA） the moderate, and retrogression and re-aging（RRA） the highest among three tempers, which is attributed to the continuous feature of precipitation on grain boundary of PA temper and the interrupted feature of precipitation on grain boundary of DPA and RRA tempers, as well as the wide precipitation free zones（PFZ） of RRA temper. In addition, the SSRT results indicated that all three tempers AA7003 are susceptible to SCC in IGC solution, and the change tendency of SCC susceptibility（ISCC） of AA7003 for three tempers follows the order： ISCC（RRA）展开更多
This paper studied the influence of aging treatment on the corrosion behavior and mechanism of Mg-Y alloys with different Y content through corrosion mass loss test, electrochemical test and corrosion morphologies obs...This paper studied the influence of aging treatment on the corrosion behavior and mechanism of Mg-Y alloys with different Y content through corrosion mass loss test, electrochemical test and corrosion morphologies observation. Results show that the peak-aging times of Mg-（0.25, 2.5, 5, 8 and 15） Y alloys at 250 ℃ were 4, 6, 10, 12 and 16 h. The aging treatment reduced the corrosion resistance of Mg-Y alloys, and the corrosion resistance of Mg-Y alloys became worse with increasing of the aging time. The change magnitude of the open circuit potentials for Mg-（0.25, 2.5）Y alloys was greater than that of Mg-（5, 8 and 15）-Y alloys. The polarization curves of Mg （0.25, 2.5, 5, 8 and 15） Y alloys had the similar shape after aging treatment, and the slopes of the anodic branch were greater than those of the cathodic branches. After aging treatment, the corrosion modes of Mg-0.25Y and Mg-（2.5, 5, 8 and 15） Y alloys were uniform corrosion and pitting corrosion with small local deep corrosion.展开更多
In this work, the microstructure and precipitation phases were primarily characterized by transmission electron microscopy. The mechanical properties were evaluated by tensile and tear test. The results indicated that...In this work, the microstructure and precipitation phases were primarily characterized by transmission electron microscopy. The mechanical properties were evaluated by tensile and tear test. The results indicated that the samples aged at 145 ℃ for 45 h or 155 ℃ for 30 h possessed a preferable combination of strength and plasticity, owing to the precipitation of well-dispersed T1 （A12CuLi） phases （diameter 〈 150 nm）. However, aging at more than 165 ℃ caused an obvious size growth of T1 plates, leading to the quick reduction in plasticity and toughness. Furthermore, the high Cu/Li ratio resulted in distinct precipitation features, including a shorter incubation time of T1 phase and the aggravated precipitate-free zones.展开更多
The objective of this study is to examine the effects of cryogenic and aging treatments on the impact strength andmechanical properties of Ti?6Al?4V alloy.To accomplish that objective,cryogenic treatment(CT),aging tre...The objective of this study is to examine the effects of cryogenic and aging treatments on the impact strength andmechanical properties of Ti?6Al?4V alloy.To accomplish that objective,cryogenic treatment(CT),aging treatment(AT)andcryogenic treatment followed by aging treatment(CAT)were conducted on Ti?6Al?4V alloy.Impact tests were performed onheat-treated and untreated samples using different impactor nose geometries(hemispherical,60°and90°conical)to determine theeffect of impactor nose geometry on the damage characteristic.The findings showed that energy absorption increased and areas ofdamage decreased as a result of heat treatment in all treated samples.The highest energy absorption was observed in the CATsamples,due to the increase in energy absorption,the smallest damaged area occurred in the CAT sample,and the largestdeformation was seen in the untreated samples.Additionally,it was seen that the damaged area and deflection were stronglydependent on impactor nose geometry.The maximum deflection and narrowest deformation area were seen with60o conical nosegeometry.The deformation area increased with increasing impactor nose angle.展开更多
For the first time,this work comprehensively studied the effectiveness of precipitation hardening achieved by aging treatment in improving the tensile superelasticity of NiTi alloys fabricated by elec-tron beam wire-f...For the first time,this work comprehensively studied the effectiveness of precipitation hardening achieved by aging treatment in improving the tensile superelasticity of NiTi alloys fabricated by elec-tron beam wire-feed additive manufacturing(EBAM),which possesses inherent advantages in producing dense and oxidation-free structures.Aging treatments under three temperatures(450,350,and 250℃)and different durations were conducted,and the resultant performance of tensile superelasticity,together with the corresponding evolution of precipitation and phase transformation behavior were investigated for the EBAM-fabricated NiTi alloys.Results showed that by appropriate aging treatment,EBAM fabricated NiTi alloys could achieve excellent recovery rates of approximately 95%and 90%after the 1st and 10th load/unload cycle for a maximum tensile strain of 6%,which were almost the highest achieved so far by AM processed NiTi alloys and close to those of some conventional NiTi alloys.The improvement of tensile superelasticity benefited from the fine and dispersive Ni4Ti3 precipitates,which could be introduced by aging at 350℃ for 4 h or at 250℃ for 200 h.Moreover,the large amount of Ni4Ti3 precipitates would promote the intermediate R-phase transformation and bring a two-stage or three-stage transformation sequence,which depended on whether the distribution of the precipitation was homogeneous or not.This work could provide guidance for the production of NiTi alloys with good tensile superelasticity by EBAM or other additive manufacturing processes.展开更多
The magnetic performance and mechanical properties including hardness, brittleness, fracture toughness and strength characteristics of the as-sintered and the optimal aged Nd-Fe-B magnets were examined in this work. A...The magnetic performance and mechanical properties including hardness, brittleness, fracture toughness and strength characteristics of the as-sintered and the optimal aged Nd-Fe-B magnets were examined in this work. A new method of Vickers hardness indentation combined with acoustic emission was used to test the brittleness of the magnets.The results show that the magnetic properties of the magnets could be improved through aging treatment, especially the intrinsic coercive force. But it is accompanied by a decrease of strength and fracture toughness. Theoretical calculation confirms that acoustic emission energy accumulated count value could be used to characterize the material brittleness. The bending fracture morphologies of the as-sintered and the optimal aged Nd Fe B magnets were investigated with the emphasis on the relationship between mechanical properties and microstructure using a field emission scanning electron microscopy(FE-SEM). The research results indicate that the intergranular fracture is the primary fracture mechanism for both as-sintered and optimal aged Nd Fe B magnets. Aging treatment changes the morphology and distribution of the Nd-rich phases, reducing the sliding resistance between Nd_2Fe_(14)B main crystal grains and lowers the grain boundary strength, which is the main reason for the strength and fracture toughness decrease of the aged Nd-Fe-B magnets.展开更多
基金Applied Basic Research Program of Liaoning Province(CN)(2022JH2/101300078)。
文摘Self-designed Al8Si0.4Mg0.4Fe aluminium alloy was modified with Sr,followed by solid solution and aging treatments to regulate its microstructure and mechanical/electrical properties.The results show that after the modification treatment,the room-temperature tensile strength of the alloy remains nearly unchanged,the elongation at break slightly increases from 1.82%to 3.34%,and the electrical conductivity significantly increases from 40.1%international annealed copper standard(IACS)to 42.0%IACS.After the modification,the alloy was subjected to solid solution treatment at 515℃for 8 h,followed by aging treatment at 180,200,220 and 240℃for 6 h.With increasing aging temperature,the electrical conductivity increases monotonously from 41.4%IACS to 45.5%IACS,while the room-temperature tensile strength initially increases and then decreases.At 200℃,the alloy achieves an optimal balance between electrical conductivity and room-temperature tensile strength:the electrical conductivity is 42.5%IACS,and the room-temperature tensile strength is 282.9 MPa.When the aging temperature continues to rise,the alloy undergoes overaging.Although the conductivity continues to increase,the room-temperature tensile strength drops sharply,and it is only 177.1 MPa at 240℃.
基金Project(52274369)supported by the National Natural Science Foundation of ChinaProject(623020034)supported by the National Key Laboratory of Science and Technology on High-strength Structural Materials,China。
文摘The pronounced anisotropy in mechanical properties presents a major obstacle to the extensive application of aluminum-lithium(Al-Li)alloys,primarily attributed to heterogeneous precipitate distribution,grain structure variations,and crystallographic texture.This study investigates the impact of pre-thermal treatment prior to hot rolling and aging treatment on the anisotropy of mechanical properties of 2195 alloy sheet fabricated by gas atomization,hot pressing and hot rolling.The results demonstrate that pre-treatment at 450℃for 4 h promotes finer and more uniform distribution of precipitates,effectively mitigating mechanical anisotropy of the alloy sheet.Additionally,this treatment facilitates recrystallization during hot rolling,further reducing mechanical anisotropy.The in-plane anisotropy(IPA)factors for ultimate tensile strength(UTS)and yield strength(YS)are 1.15%and 0.77%,respectively.Subsequent aging treatment enhances grain refinement and the uniformity of the T_(1) phase,suppresses the formation of precipitation-free zones(PFZs),significantly improving the strength and toughness of the alloy sheet.After peak aging at 165℃for 48 h,the alloy sheet exhibits YS of 547 MPa,UTS of 590 MPa,and elongation(EL)of 7.7%.
基金supported by the National Natural Science Foundation of China(Nos.52272362,U20A20275)the Technology Innovation and Application Development Special Key Project of Chongqing City,China(No.CSTB2022TIAD-KPX0035).
文摘The bending collapse and energy absorption of 7003 aluminum alloy bumper beams under four aging conditions(pre-aging,under-aging,peak-aging,and over-aging)were investigated through three-point bending tests.Microstructural characterization was performed using scanning electron microscopy and transmission electron microscopy.Based on the Swift−Hockett−Sherby constitutive model combined with the Gurson−Tvergaard−Needleman damage model,the plastic response and fracture behavior of the 7003 aluminum alloy under uniaxial tension and three-point bending were accurately predicted.The results showed that the peak bending force of the beams was proportional to the strength under different aging states,while stress triaxiality governed the cracking failure.Pre-aged and under-aged beams resisted cracking until reaching 250 mm displacement due to stress transition from tensile to compression on the bottom surface.The under-aged beam exhibited optimal energy absorption(7.86 kJ)and a higher peak force(38.75 kN).
基金supported by the High-tech Industry Technology Innovation Leading Plan of Hunan Province,China(No.2022GK4032)the State Key Laboratory of Precision Manufacturing for Extreme Service Performance at Central South University,China.
文摘The impact of cryorolling(CR)and room temperature rolling(RTR)followed by artificial aging on the corrosion characteristics of 2195 Al−Li alloy(AA2195)was studied.Transmission electron microscope,scanning electron microscope,optical microscope,intergranular corrosion experiment,and electrochemical experiment were used.Throughout different stages of aging treatment,the corrosion behavior of both CR and RTR samples exhibited a sequential progression of pitting corrosion,followed by intergranular corrosion,and then pitting corrosion again.The corrosion rates of both samples initially showed an increase,followed by a gradual stabilization over time.The size and density of T1 phase significantly influenced the corrosion performance of the alloy.During the peak aging and over-aging stages,the CR sample exhibited superior corrosion resistance to the RTR sample,attributed to its finer T1 phase.
基金financially supported by the the National Natural Science Foundation of China(Nos.51801079 and 52001140)the Natural Science Foundation for Young Scientists of Jiangsu,China(Nos.BK20180985 and BK20180987)the Open Foundation of Zhenjiang Key Laboratory for High Technology Research on Marine Functional Films(No.ZHZ2019001)。
文摘Many studies have investigated the selective laser melting(SLM)of AlSi10Mg and AlSi7Mg alloys,but there are still lack of researches focused on Al-Si-Mg alloys specifically tailored for SLM.In this work,a novel high Mg-content AlSi8Mg3 alloy was specifically designed for SLM.The results showed that this new alloy exhibited excellent SLM processability with a lowest porosity of 0.07%.Massive lattice distortion led to a high Vickers hardness in samples fabricated at a high laser power due to the precipitation of Mg_(2)Si nanoparticles from theα-Al matrix induced by high-intensity intrinsic heat treatment during SLM.The maximum microhardness and compressive yield strength of the alloy reached HV(211±4)and(526±12)MPa,respectively.After aging treatment at 150℃,the maximum microhardness and compressive yield strength of the samples were further improved to HV(221±4)and(577±5)MPa,respectively.These values are higher than those of most known aluminum alloys fabricated by SLM.This paper provides a new idea for optimizing the mechanical properties of Al-Si-Mg alloys fabricated using SLM.
基金financially supported by the Major Special Projects in Anhui Province,China(No.202003c08020005)the Key Projects in Hunan Province,China(No.2020GK2045).
文摘High-resolution transmission electron microscopy(TEM),X-ray diffractometer(XRD),and hardness test were used to study the evolution of long plate-shaped S'phase in the spray-formed fine-grained Al−Cu−Mg alloy during aging after rapid cold punching deformation.Results show that the long plate-shaped S'phase in the extruded Al−Cu−Mg alloy undergoes evident distortion,brittle failure,separation and redissolution,during rapid cold punching deformation,leading to the transformation of long plate-shaped S'phase into short rod or even redissolution and disappearance,causing the matrix to become a supersaturated solid solution.After the aging treatment,the reprecipitation of the phases occurs,and these aging phases are mainly long plate-shaped and granular.The incompletely dissolved S'phase acts as nucleation core,promoting uphill diffusion of the surrounding solute atoms.The S'phase gradually grows with increasing the aging time.The completely dissolved S'phase forms the incoherent equilibrium phase with the matrix to reduce its free energy.After rapid cold punching,the aging response of the deformed Al−Cu−Mg alloy is accelerated,and the hardness of the alloy is substantially increased.
基金supported by the National Natural Science Foundation of China(No.50775107)National High Technical Research and Development Program of China (No.2007AA04Z407)Innovation Program for Graduate Students in Nanjing University of Technology (No.BSCX200816)
文摘Cr25Ni35Nb and Cr35Ni45Nb alloys are usually used in the ethylene cracking furnaces. However, premature failure of furnace tubes often occurs ahead of design life due to elevated temperature exposure conditions （1050-1100 ℃） and aggressive service environment. Effects of exposure temperature and time on microstructure and mechanical properties of Cr25Ni35Nb and Cr35Ni45Nb steel at aging temperature （1200 ℃） with various exposure time were simulated different service times at 1050 ℃. Change of mechanical properties at room temperature and elevated temperature （900 ℃） of the aged Cr25Ni35Nb and Cr35Ni45Nb steel were investigated. Under exposure at 1200 ℃, ultimate tensile and yield strength, elongation of Cr35Ni45Nb steel increase initially and then decrease, however, strength and ductility of Cr25Ni35Nb steel decrease with aging time increasing. Large amount of fine secondary carbide particles precipitated and dispersed in matrix of Cr35Ni45Nb steel, which increased strength and ductility for dispersion strengthening. However, the effect of the dispersion strengthening is weakened by needle-like secondary carbides. Strength and ductility decreased with fine secondary carbide particles growing. For Cr25Ni35Nb steel, few fine secondary carbide particles precipitated and dispersed in the matrix, and needle-like secondary carbides generated in the matrix, which causes strength and ductility decreased with aging time increasing.
基金This work was financially supported by Ji Hua Laboratory“Development of additive manufactured core process and special equipment for key parts of aero-engines”(No.X190351TM190)the Basic and Applied Basic Research Foundation of Guangdong Province(No.2022A1515011597).
文摘Direct aging treatment is an important post-processing procedure,yet little research has been done on how it balances the mechanical properties and the stress removal for selective laser melted(SLMed)AlSi10Mg alloys.Here,we proposed a typical direct aging treatment on SLMed AlSi10Mg alloys,and studied the effects on their microstructure,properties and residual stress evolution.The results indi-cate that the as-built microstructure is mainly composed of fine cellularα-Al and reticulated Si phases,and some pre-existing precipitates and dislocations are found in these cells.The direct aging treatment promotes the precipitation of nano-scaled Si phases and preserves a network-like Si structure.Therefore,the strength of the peak-aged alloy increases while the ductility decreases.As the aging temperature in-creases from 160 to 200℃,aging hardening behavior was accelerated significantly.Aging at 160℃ for 4-9 h removes 32.0%-43.0%of the residual stress,which is attributed to the decomposition of the su-persaturatedα-Al matrix,the precipitation of the nano-Si phase and the exposure of low-angle grain boundaries(LAGBs).Considering the overal alloy performance obtained,over-aging at 160℃ for 4 h is the optimized heat treatment regime.Under this condition,the yield strength(YS),ultimate tensile strength(UTS)and elongation(EL)of the alloy in the transverse and longitudinal direction are 309.5 MPa,464.4 MPa and 8.3%and 286.4 MPa,464.9 MPa and 5.1%,respectively.
基金financially supported by the National Natural Science Foundation of China (Nos. 52001142, 52005228, 51801218, 51911530211, and 51905110)Science Foundation of Jiangsu Province (No. BK 20180984)。
文摘The effect of aging treatment on the microstructure and corrosion behavior of a Fe-18Cr-15Mn-0.66N high-nitrogen stainless steel(HNSS) in 3.5 wt.% Na Cl solution was investigated using a series of electrochemical tests, scanning electronic microscopy(SEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). The results showed that the aging treatment led to the precipitation of CrN particles along the grain boundaries and their morphologies changed from dispersive particles to continuous network as the aging time increased up to 60 min. Aging time had minor effects on the corrosion potential and corrosion current density, but resulted in the sharp decrease in the pitting corrosion potential.The passive film behaved as a n-type semiconductor, and the donor density of the passive film increased with the aging time. Meanwhile, the fraction of stable oxide(CrO) in the passive film decreased with the aging time. It demonstrates that the aging treatment deteriorated the protectiveness of the passive film, hence weakened the corrosion resistance of HNSS.
基金financially supported by the Fundamental Research Program(PNK6960)of the Korea Institute of Materials Science(KIMS)。
文摘The present study proposes a methodology for predicting the mechanical properties of AZ61 and AZ91alloys associated with microstructure,texture and aging parameters and estimating predictor importance.For this,we investigate quantitative correlations between microstructure,texture and mechanical properties of aged AZ61 and AZ91 rods through machine learning.This regression analysis focuses on the precipitation behavior of Mg17Al12as the main second phase of Mg-Al-Zn alloys with respect to aging conditions.To simplify data generation,only SEM images were used to quantify the features of discontinuous and continuous precipitates.To overcome the lack of data and make the most of the measured data,we devised a method to extend the existing dataset by a factor of 9 using the mean and standard deviation of the measured data.Artificial neural networks predicted tensile and compressive yield strengths and resultant yield asymmetry with a high accuracy of over 98%using 11 predictors for a total of 288datasets.Decision tree learning quantitatively assessed the importance of predictors in determining the mechanical properties of aged AZ61 and AZ91 rods.
基金financially supported by the National Key R&D Program of China(No.2017YFB0702302)the National Natural Science Foundation of China(No.51771174)the National Materials Corrosion and Protection Data Center。
文摘The microstructure and corrosion behavior of Al-Zn-Mg alloy(namely 7×××)after natural aging treatment(NAT)and artificial aging treatment(AAT)in aqueous NaCl solutions containing different aggressive ions have been investigated in current work.Results of microstructure characterization demonstrate that the aging treatment has a great influence on the grain size and precipitates.The grain size is relatively sizeable and no evident precipitates are observed in alloy after NAT comparable with that after AAT.The electrochemical corrosion behavior of alloy was studied by polarization curve and electrochemical impedance spectroscopy(EIS).The corrosion potential(E_(corr))of the aluminum alloy is more negative in 3.5 wt.%NaCl containing 0.052 wt.%NaHSO_(3)solution than that in 3.5 wt.%NaCl solutions with or without 0.907 wt.%NaHCO_(3).Charge transfer resistance(Rct)results reveal that alloy after AAT has an enhancement of corrosion resistance compare with that after NAT.With the immersion time increasing,mostly pitting spreads over the surface of the alloy only in NaCl solution,whereas exfoliation corrosion mainly occurs in NaCl solutions containing NaHSO_(3)or NaHCO_(3).
基金supported by the National Natural Science Foundation of China (No. 50921003)
文摘The influence of aging treatment on transformation behavior and shape memory of the Ti 50_x Ni_(48) Fe_2 Nb_x(x=0,0.6,0.8,1.0,and 1.2) alloys was investigated using differential scanning calorimeter(DSC),mechanical drawing machine,and microhardness tester in this paper.It is indicated that the aging treatment has a significant effect on the phase transformation temperatures(M_s,M_f,M_p,A_s,A_f,and A_p) and microhardness of the samples.The phase transformation temperatures are found to decrease initially with the increasing aging temperature from 300 to 500 ℃ and increase with further increase of the aging temperature.The aging treatment at intermediate temperature between 400 and 500 ℃ results in an improved shape memory effect.In addition,the highest microhardness value is also obtained.
基金financially supported by the Key R&D program of Shanxi Province (International Cooperation) (No.201903D421036)the Natural Science Foundation of Shanxi Province (No.201901D111176)+5 种基金the Joint Funds of the National Natural Science Foundation of China (Grant No.U20A20230)the Bureau of Science,Technology and Industry for National Defense of China (No.WDZC2019JJ006)the National Natural Science Foundation of China (Grant No.52075501)Scientific and Technological Innovation Programs of Higher Education Institutions in Shanxi (No.201802072)the National Defense Basic Scientific Research Program (No.JCKY2018408B003)the XX Supporting Scientific Research Project (No.xxxx-2019-021)。
文摘In this study, the precipitation transformation and age hardening of solution-treated Mg-9Gd-4Y-2Zn-0.5Zr(wt.%) alloy were investigated at different aging treatment parameters. The precipitation sequences of the alloy aged at 200℃, 250℃ and 300℃ are β’’(DO19) → β’(BCO) → β(FCC), β’’(DO19) → β’(BCO) → β_(1)(FCC) → β(FCC) and β(FCC), respectively. The streaks sequences of the alloy aged at 200℃, 250℃ and 300℃ are SF, SF → 14H-LPSO and SF → 14H-LPSO, respectively. For the alloy aged at 200℃ and 250℃, the increase in hardness with increasing aging time is contributed from the increase in precipitate volume fraction and the transformation from β’’ to β’ phase with basal → prismatic and spherical → spindle-like precipitate changes. The decrease in hardness after the peak-aging stage is attributed to the appearance of micro-sized β precipitates. Because of the smaller size of precipitates and the triangular arrangement of β’ precipitate, the hardness of the alloy aged at 200℃ is higher than that aged at 250℃. For the alloy aged at 300℃, the appearance of only micro-sized β precipitate and its coarsening with increasing aging time leads to the lowest hardness and an overall decrease in hardness with the aging time.
基金supported by the National Aerospace Science Foundation of China (Grant No. 20133069014)the National Natural Science Foundation of China (Grant No. U1737103)
文摘The influence of oxygen（O） content on the microstructure and mechanical properties of cold rolled Ti-32.5 Nb-6.8 Zr-2.7 Sn-xO（TNZS-xO; x = 0,0.3.0.6; mass%） alloys after aging at temperature range from 350 to 600℃ for 24 h was investigated. Results showed that the cold rolled TNZS-xO alloys possess single βphase. During the aging process, O could not only effectively suppress the precipitation of ω phase but also retard the formation and decomposition of a phase. In addition, the corresponding temperatures of the maximal volume fraction of α phase precipitation and the（α＋β）/β transus temperatures of the TNZS-xO alloys were all increased with the increasing of O content. For mechanical properties, it was found that the strength and Young＇s modulus of the TNZS-xO alloys increased owing to the ω phase and/or a phase precipitation and decreased owing to the a phase decomposition. However, the elongation showed the opposite change tendency with the above mentioned strength. The mechanical properties of TNZS-xO alloys can be controlled over a wide range by subjecting to aging treatment and/or changing their 0 content. When aged at or below 450 ℃,the TNZS-xO alloys exhibit great potential to become a series of new candidates for biomedical applications since they possess high strength（870-1460 MPa）, low Young＇s modulus（45.1-75.6 GPa）, high strength-to-modulus ratio（0.018-0.02） and appropriate elongation（7.2%-14.9%）, which are superior to those of Ti-6 Al-4 V alloy and suitable for the use as bio-implant materials.
基金Funded by the National Natural Science Foundation of China(No.51371039)
文摘In order to study the effects of aging treatment on the intergranular corrosion（IGC） and stress corrosion cracking（SCC） of 7003 aluminum alloy（AA7003）, the intergranular corrosion test, electrochemical test and slow strain rate test（SSRT）, combined with optical microscopy（OM） and scanning electron microscopy（SEM） as well as transmission electron microscopy（TEM） observations have been carried out. The IGC and electrochemical test results showed that the IGC resistance of AA7003 for peak aged（PA） temper is the lowest, with double peak aged（DPA） the moderate, and retrogression and re-aging（RRA） the highest among three tempers, which is attributed to the continuous feature of precipitation on grain boundary of PA temper and the interrupted feature of precipitation on grain boundary of DPA and RRA tempers, as well as the wide precipitation free zones（PFZ） of RRA temper. In addition, the SSRT results indicated that all three tempers AA7003 are susceptible to SCC in IGC solution, and the change tendency of SCC susceptibility（ISCC） of AA7003 for three tempers follows the order： ISCC（RRA）
基金Projects(2011BAE22B01,2011BAE22B06)supported by the National Key Technology R&D Program,China
文摘This paper studied the influence of aging treatment on the corrosion behavior and mechanism of Mg-Y alloys with different Y content through corrosion mass loss test, electrochemical test and corrosion morphologies observation. Results show that the peak-aging times of Mg-（0.25, 2.5, 5, 8 and 15） Y alloys at 250 ℃ were 4, 6, 10, 12 and 16 h. The aging treatment reduced the corrosion resistance of Mg-Y alloys, and the corrosion resistance of Mg-Y alloys became worse with increasing of the aging time. The change magnitude of the open circuit potentials for Mg-（0.25, 2.5）Y alloys was greater than that of Mg-（5, 8 and 15）-Y alloys. The polarization curves of Mg （0.25, 2.5, 5, 8 and 15） Y alloys had the similar shape after aging treatment, and the slopes of the anodic branch were greater than those of the cathodic branches. After aging treatment, the corrosion modes of Mg-0.25Y and Mg-（2.5, 5, 8 and 15） Y alloys were uniform corrosion and pitting corrosion with small local deep corrosion.
基金the financial support of the Fund of National Engineering and Research Center for Commercial Aircraft Manufacturing (No. SAMC13-JS-15-032)Jiangsu Innovation Program for Graduate Education (No. KYLX0259)+2 种基金the Fundamental Research Funds for the Central Universitiesthe Foundation of Graduate Innovation Center in NUAA(No. kfjj20130220)Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology (No. ASMA201401)
文摘In this work, the microstructure and precipitation phases were primarily characterized by transmission electron microscopy. The mechanical properties were evaluated by tensile and tear test. The results indicated that the samples aged at 145 ℃ for 45 h or 155 ℃ for 30 h possessed a preferable combination of strength and plasticity, owing to the precipitation of well-dispersed T1 （A12CuLi） phases （diameter 〈 150 nm）. However, aging at more than 165 ℃ caused an obvious size growth of T1 plates, leading to the quick reduction in plasticity and toughness. Furthermore, the high Cu/Li ratio resulted in distinct precipitation features, including a shorter incubation time of T1 phase and the aggravated precipitate-free zones.
文摘The objective of this study is to examine the effects of cryogenic and aging treatments on the impact strength andmechanical properties of Ti?6Al?4V alloy.To accomplish that objective,cryogenic treatment(CT),aging treatment(AT)andcryogenic treatment followed by aging treatment(CAT)were conducted on Ti?6Al?4V alloy.Impact tests were performed onheat-treated and untreated samples using different impactor nose geometries(hemispherical,60°and90°conical)to determine theeffect of impactor nose geometry on the damage characteristic.The findings showed that energy absorption increased and areas ofdamage decreased as a result of heat treatment in all treated samples.The highest energy absorption was observed in the CATsamples,due to the increase in energy absorption,the smallest damaged area occurred in the CAT sample,and the largestdeformation was seen in the untreated samples.Additionally,it was seen that the damaged area and deflection were stronglydependent on impactor nose geometry.The maximum deflection and narrowest deformation area were seen with60o conical nosegeometry.The deformation area increased with increasing impactor nose angle.
基金This work was financially supported by the Tribology Science Fund of the State Key Laboratory of Tribology(No.SKLT2022C20)the National Natural Science Foundation of China(Nos.51875309 and 51905310)the Natural Science Foundation of Shandong Province(No.ZR2020YQ39).
文摘For the first time,this work comprehensively studied the effectiveness of precipitation hardening achieved by aging treatment in improving the tensile superelasticity of NiTi alloys fabricated by elec-tron beam wire-feed additive manufacturing(EBAM),which possesses inherent advantages in producing dense and oxidation-free structures.Aging treatments under three temperatures(450,350,and 250℃)and different durations were conducted,and the resultant performance of tensile superelasticity,together with the corresponding evolution of precipitation and phase transformation behavior were investigated for the EBAM-fabricated NiTi alloys.Results showed that by appropriate aging treatment,EBAM fabricated NiTi alloys could achieve excellent recovery rates of approximately 95%and 90%after the 1st and 10th load/unload cycle for a maximum tensile strain of 6%,which were almost the highest achieved so far by AM processed NiTi alloys and close to those of some conventional NiTi alloys.The improvement of tensile superelasticity benefited from the fine and dispersive Ni4Ti3 precipitates,which could be introduced by aging at 350℃ for 4 h or at 250℃ for 200 h.Moreover,the large amount of Ni4Ti3 precipitates would promote the intermediate R-phase transformation and bring a two-stage or three-stage transformation sequence,which depended on whether the distribution of the precipitation was homogeneous or not.This work could provide guidance for the production of NiTi alloys with good tensile superelasticity by EBAM or other additive manufacturing processes.
基金Project((2012)1743)supported by the China National Major Special Program for the Rare Earth and Rare Metallic Materials
文摘The magnetic performance and mechanical properties including hardness, brittleness, fracture toughness and strength characteristics of the as-sintered and the optimal aged Nd-Fe-B magnets were examined in this work. A new method of Vickers hardness indentation combined with acoustic emission was used to test the brittleness of the magnets.The results show that the magnetic properties of the magnets could be improved through aging treatment, especially the intrinsic coercive force. But it is accompanied by a decrease of strength and fracture toughness. Theoretical calculation confirms that acoustic emission energy accumulated count value could be used to characterize the material brittleness. The bending fracture morphologies of the as-sintered and the optimal aged Nd Fe B magnets were investigated with the emphasis on the relationship between mechanical properties and microstructure using a field emission scanning electron microscopy(FE-SEM). The research results indicate that the intergranular fracture is the primary fracture mechanism for both as-sintered and optimal aged Nd Fe B magnets. Aging treatment changes the morphology and distribution of the Nd-rich phases, reducing the sliding resistance between Nd_2Fe_(14)B main crystal grains and lowers the grain boundary strength, which is the main reason for the strength and fracture toughness decrease of the aged Nd-Fe-B magnets.
