期刊文献+
共找到562篇文章
< 1 2 29 >
每页显示 20 50 100
Z-Scheme membrane CdZnS/TiO_(2) heterojunction photocatalyst for efficient photocatalytic removal of Microcystis aeruginosa under simulated sunlight:Adjustable suspended depth and flexible assembly 被引量:1
1
作者 Jing Tian Feng Qian +4 位作者 Yanguang Zhang Weibing Li Jiarun Li Shiqiang Chen Lei Wang 《Journal of Materials Science & Technology》 2025年第14期70-79,共10页
The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most po... The application of photocatalytic technology in algae killing is limited by the non-floatability and difficulty in recycling of the photocatalysts.Loading photocatalyst on magnetic or floatable carriers is the most popular method for overcoming the above inadequacies.In this work,a CdZnS/TiO_(2) membrane photocatalyst with adjustable suspended depth(include floating)and flexible assembly is designed,which is less prone to dislodgement due to in situ synthesis and has a wider range of applicability than previously reported photocatalysts.The photocatalytic removal of Microcystis aeruginosa revealed that the suspended depth and distribution format of the CdZnS/TiO_(2) membrane photocatalysts have striking effects on the photocatalytic removal performance of Microcystis aeruginosa,the photocatalytic removal efficiency of CdZnS/TiO_(2)-2 membrane photocatalysts for Microcystis aeruginosa could reach to 98.6%in 60 min when the photocatalysts assembled in the form of 3×3 arrays suspended at a depth of 2 cm from the liquid surface.A tiny amount of TiO_(2) loading allows the formation of Z-Scheme heterojunction,resulting in accelerating the separation efficiency of photogenerated carriers,preserving the photogenerated electrons and holes with stronger reduction and oxidation ability and inhabiting the photo-corrosion of CdZnS. 展开更多
关键词 Suspended Flexible assembly CdZnS/TiO_(2) Membrane photocatalyst Photocatalytic removal of Microcystis aeruginosa
原文传递
A visible-light-driven CoS_(2)/CuS@CNT-C_(3)N_(4)photocatalyst for high-performance rechargeable zinc-air batteries beyond 500 mW cm^(-2) 被引量:1
2
作者 Yang Zhang Nengneng Xu +9 位作者 Bingbing Gong Xiaoxiao Ye Yi Yang Zhaodi Wang Biyan Zhuang Min Wang Woochul Yang Guicheng Liu Joong Kee Lee Jinli Qiao 《Chinese Journal of Catalysis》 2025年第1期300-310,共11页
Storing solar energy in battery systems is crucial to achieving a green and sustainable society.However,the efficient development of photo-enhanced zinc-air batteries(ZABs)is limited by the rapid recombination of phot... Storing solar energy in battery systems is crucial to achieving a green and sustainable society.However,the efficient development of photo-enhanced zinc-air batteries(ZABs)is limited by the rapid recombination of photogenerated carriers on the photocathode.In this work,the visible-light-driven CoS_(2)/CuS@CNT-C_(3)N_(4)photocatalyst with unique petal-like layer structure was designed and developed,which can be used as air electrode for visible-light-driven ZABs.The superior performance of ZABs assembled by CoS_(2)/CuS@CNT-C_(3)N_(4)was mainly attributed to the successful construction of Schottky heterojunction between g-C_(3)N_(4)and carbon nanotubes(CNTs),which accelerates the transfer of electrons from g-C_(3)N_(4)to CoS_(2)/CuS cocatalysts,improves the carrier separation ability,and extends the carrier lifetime.Thereinto,the visible-driven ZABs assembled by CoS_(2)/CuS@CNT-C_(3)N_(4)photocatalyst has a power density of 588.90 mW cm^(-2) and a charge-discharge cycle of 643 h under visible light irradiation,which is the highest performance ever reported for photo-enhanced ZABs.More importantly,the charge-discharge voltage drop of ZABs was only 0.54 V under visible light irradiation,which is significantly lower than the voltage drop(0.94 V)in the dark.This study provides a new idea for designing efficient and stable visible-light-driven ZABs cathode catalysts. 展开更多
关键词 Visible-light-driven CoS_(2)/CuS@CNT-C_(3)N_(4)photocatalyst Zinc-air battery Heterojunction Photogenerated carriers
在线阅读 下载PDF
2D/2D F-doped TiO_(2)/CdS S-scheme heterojunction photocatalyst for enhanced photocatalytic H_(2) generation
3
作者 Wenjing Fu Shan Wang +2 位作者 Yingjie Zhang Bei Cheng Yan Wu 《Journal of Materials Science & Technology》 2025年第29期181-190,共10页
Two-dimensional(2D)heterojunctions are promising photocatalysts for hydrogen production due to their unique ability to efficiently convert solar energy to green fuels.In this work,an S-scheme 2D/2D FTiO_(2)/CdS hetero... Two-dimensional(2D)heterojunctions are promising photocatalysts for hydrogen production due to their unique ability to efficiently convert solar energy to green fuels.In this work,an S-scheme 2D/2D FTiO_(2)/CdS heterostructure was designed and synthesized via a facile hydrothermal method.The hydrogen evolution rate of optimal F-TiO_(2)/CdS photocatalyst irradiated with simulated sunlight reached to 1.7 mmol g^(−1) h^(−1),which was about 7 times that of pristine CdS nanosheets,1.5 times that of TiO_(2) nanoparticles composited with CdS nanosheets,and the apparent quantum efficiency at 420 nm was 4.3%.The insitu Kelvin probe force microscopy results showed that the built-in electric field strength(BIEF)of 2D/2D F-TiO_(2)/CdS is about 6.2×10^(3) V cm^(−1) under the dark condition,which is about 2.3 times that of TiO_(2) nanoparticles composited with CdS nanosheets.Moreover,in-situ electron paramagnetic resonance results showed that the valence band position of F-TiO_(2) is more positive and showed a clear signal peak,suggesting that F-TiO_(2) could generate more hydroxyl radicals.When F-TiO_(2) contacts with CdS,the signals of both radicals are significantly enhanced,indicating that the reducing ability of CdS and the oxidizing ability of F-TiO_(2) are well preserved.These results verify that S-scheme 2D/2D F-TiO_(2)/CdS processes stronger BIEF,which could effectively enhance the photocatalytic hydrogen production activity. 展开更多
关键词 photocatalyst H_(2)production F-doped TiO_(2)/CdS Built-in electric field
原文传递
Green synthesis of cyclic carbonates:ZnV_(2)O_(6)@Bi_(2)WO_(6)nanocomposite photocatalyst for efficient CO_(2)epoxidation
4
作者 Yunlin Li Jing Jiang +3 位作者 Chaosheng Zhu Wenli Feng Songfang Han Lili Li 《Journal of Environmental Sciences》 2025年第8期665-677,共13页
The present levels of CO_(2)emission in the atmosphere require the development of technologies to achieve carbon neutrality using inexpensive processes.Conversion of CO_(2)into cyclic carbonates is one of the solution... The present levels of CO_(2)emission in the atmosphere require the development of technologies to achieve carbon neutrality using inexpensive processes.Conversion of CO_(2)into cyclic carbonates is one of the solutions to this problem.Here,we synthesized a ZnV_(2)O_(6)/Bi_(2)WO_(6)nanocomposite and catalyzed the cycloaddition of CO_(2)to epoxides for the green synthesis of cyclic carbonates under visible light irradiation.The present nanocomposite photocatalyst exhibited up to 96%yield of cyclic carbonates.The photocatalyst was found to be efficient for photocatalytic cycloaddition reactions,and the recovered photocatalyst showed stability in up to five consecutive photocatalytic experiments.The current methodology of cyclic carbonate production is a significant step toward the mitigation of atmospheric CO_(2)and can work well with the development of nanocomposite photocatalysts. 展开更多
关键词 Nanocomposite photocatalyst CO_(2)mitigation Green chemistry Cyclic carbonates Sustainable conversion
原文传递
Boosting H_(2)O_(2) evolution of CdS via constructing a ternary photocatalyst with earth-abundant halloysite nanotubes and NiS co-catalyst
5
作者 Hongfen Li Yihe Zhang +4 位作者 Jianming Li Qing Liu Xiaojun Zhang Youpeng Zhang Hongwei Huang 《Chinese Journal of Catalysis》 2025年第2期111-122,共12页
Hydrogen peroxide(H_(2)O_(2)),an environmentally friendly chemical with high value,is extensively used in industrial production and daily life.However,the traditional anthraquinone method for H_(2)O_(2) production is ... Hydrogen peroxide(H_(2)O_(2)),an environmentally friendly chemical with high value,is extensively used in industrial production and daily life.However,the traditional anthraquinone method for H_(2)O_(2) production is associated with a highly energy-consuming and heavily polluting process.Solor-driven photocatalytic evolution of H_(2)O_(2) is a promising,eco-friendly,and energy-efficient strategy that holds great potential to substitute the traditional approach.Here,a ternary photocatalyst,NiS/CdS/Halloysite nanotubes(NiS/CdS/HNTs)is designed and prepared with an earth-abundant clay mineral HNTs as the support and NiS as a co-catalyst.The pivotal roles of HNTs and NiS in the photocatalytic process are elucidated by experiments and theoretical calculations.HNTs serve as the carrier,which allows CdS to be uniformly dispersed onto its surface as small particles,increasing effective contact with H_(2)O and O_(2) for H_(2)O_(2) formation.Simultaneously,it resulted in the formation of a Schottky junction between NiS and CdS,which not only favors photogenerated charges separating efficiently but also provides a unidirectional path to transfer electrons.Consequently,the optimized NiS/CdS/HNTs composite demonstrates an H_(2)O_(2) evolution rate of 380.5μmol·g^(-1)·h^(-1) without adding any sacrificial agent or extra O_(2),nearly 5.0 times that of pure CdS.This work suggests a feasible idea for designing and developing highly active and low-cost solar energy catalytic composite materials. 展开更多
关键词 Photocatalytic H_(2)O_(2)evolution Ternary photocatalyst NiS/CdS/HNTs Carrier separation Schottky junction
在线阅读 下载PDF
Recyclable Fe_(3)O_(4)-decorated MoS_(2)Nanosheets for Photocatalytic Degradation of Tetracycline
6
作者 SHEN He WANG Yanyan 《发光学报》 北大核心 2026年第2期348-356,共9页
In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prep... In this work,we report a fabrication of recyclable iron oxide decorated MoS_(2)nanosheets via a facile liq-uid exfoliation approach and solvothermal reaction for visible-light photodegradation of tetracycline.The prepared Fe_(3)O_(4)-MoS_(2)was characterized by X-ray diffraction,transmission electron microscopy,X-ray photoelectron spectros-copy,Raman spectroscopy,magnetic hysteresis,and nitrogen adsorption-desorption isotherms.Experimental results indicate that,successful attachment of Fe_(3)O_(4)nanoparticles to MoS_(2)sheets has been achieved.The enhanced surface area of Fe_(3)O_(4)-MoS_(2)induced high rates of adsorption and the adsorbed tetracycline was degraded to 90%after 150 min of visible exposure,which is better than that from pure MoS_(2).The introduction of Fe_(3)O_(4)not only enhances the photo-catalytic performance of Fe_(3)O_(4)-MoS_(2),but also enables its convenient recovery from water by an external magnetic field.Furthermore,both the photocatalytic activity and composite phase of Fe_(3)O_(4)-MoS_(2)were well-retained over cy-cles.Owing to its efficient photocatalytic activity,good stability and magnetic recyclability,the Fe_(3)O_(4)-MoS_(2)nano-composite is considered to be a promising photocatalyst for wastewater treatment. 展开更多
关键词 Fe_(3)O_(4) MoS_(2) photocatalyst magnetic recyclability
在线阅读 下载PDF
复合光催化剂Bi_(12)O_(17)Cl_(2)/TiO_(2)制备及其性能
7
作者 殷榕灿 胡丹丹 崔玉民 《工程科学学报》 北大核心 2026年第1期62-71,共10页
在室温条件下,利用BiCl_(3)·5H_(2)O、NaOH和CH_(3)CH_(2)OH作原料合成了Bi_(12)O_(17)Cl_(2)光催化剂.把TiO_(2)与Bi_(12)O_(17)Cl_(2)通过机械混合法进行复合,制备Bi_(12)O_(17)Cl_(2)/TiO_(2)复合光催化剂.通过改变Bi_(12)O_(17... 在室温条件下,利用BiCl_(3)·5H_(2)O、NaOH和CH_(3)CH_(2)OH作原料合成了Bi_(12)O_(17)Cl_(2)光催化剂.把TiO_(2)与Bi_(12)O_(17)Cl_(2)通过机械混合法进行复合,制备Bi_(12)O_(17)Cl_(2)/TiO_(2)复合光催化剂.通过改变Bi_(12)O_(17)Cl_(2)在Bi_(12)O_(17)Cl_(2)/TiO_(2)中的质量分数,分别考察Bi_(12)O_(17)Cl_(2)/TiO_(2)和TiO_(2)在紫外光和可见光条件下,对甲基橙的光催化降解效率.研究发现,当用紫外光照射1.25 h时,3%Bi_(12)O_(17)Cl_(2)/TiO_(2)催化剂的紫外光催化活性最高,3%Bi_(12)O_(17)Cl_(2)/TiO_(2)光催化降解甲基橙的降解效率为100%.当用可见光照射2 h时,3%Bi_(12)O_(17)Cl_(2)/TiO_(2)催化剂的可见光催化活性最高,3%Bi_(12)O_(17)Cl_(2)/TiO_(2)光催化降解甲基橙的降解率为90%.当用可见光照射2 h时,3%Bi_(12)O_(17)Cl_(2)/TiO_(2)光催化降解甲基橙溶液的COD(Chemical oxygen demand)去除率最高,其COD去除率为75%.通过对Bi_(12)O_(17)Cl_(2)/TiO_(2)光催化反应机理研究表明,TiO_(2)有比Bi_(12)O_(17)Cl_(2)更负的导带值,TiO_(2)也具有比Bi_(12)O_(17)Cl_(2)更正的价带值.在光照条件下,位于二氧化钛导带上的电子,可以向Bi_(12)O_(17)Cl_(2)的导带上迁移.与此同时,位于二氧化钛价带上的空穴,可以向Bi_(12)O_(17)Cl_(2)的价带上迁移,使得TiO_(2)中光生电子与空穴的复合率得以有效降低,进而提高了Bi_(12)O_(17)Cl_(2)/TiO_(2)光催化降解率.由于发生上述电荷转移,能够使电子-空穴对有效分离,即提升了光催化降解甲基橙的活性.光生电子与O_(2)发生反应,生成·O_(2)^(-).而·O_(2)^(-)与h^(+)为具有很强氧化能力的活性自由基,可以把甲基橙氧化降解为CO_(2)、H_(2)O和N_(2)等无机矿化产物.这将对于开发新型光催化材料、深度处理有机染料污染物和保护环境具有重要意义. 展开更多
关键词 光催化 TiO_(2) 三氯化铋 复合光催化剂 Bi_(12)O_(17)Cl_(2) 甲基橙
在线阅读 下载PDF
S型g-C_(3)N_(4)-Bi_(2)WO_(6)异质结光催化剂制备及降解亚甲基蓝
8
作者 赵丽敏 张宝峰 +1 位作者 靳瑞发 王丽敏 《水处理技术》 北大核心 2026年第3期93-100,共8页
利用高温热聚合法制备了石墨相氮化碳(g-C_(3)N_(4)),采用传统水热法合成了钨酸铋(Bi_(2)WO_(6)),通过超声分散和微波辅助水热法快速制备了g-C_(3)N_(4)-Bi_(2)WO_(6)复合物光催化剂并将其用于光催化降解亚甲基蓝染料。此外,还考察了g-C... 利用高温热聚合法制备了石墨相氮化碳(g-C_(3)N_(4)),采用传统水热法合成了钨酸铋(Bi_(2)WO_(6)),通过超声分散和微波辅助水热法快速制备了g-C_(3)N_(4)-Bi_(2)WO_(6)复合物光催化剂并将其用于光催化降解亚甲基蓝染料。此外,还考察了g-C_(3)N_(4)和Bi_(2)WO_(6)的摩尔比例、反应溶液的pH、微波反应时间、光催化剂的循环使用次数对g-C_(3)N_(4)-Bi_(2)WO_(6)复合物光催化剂活性的影响。研究结果显示,制备的S型g-C_(3)N_(4)-Bi_(2)WO_(6)异质结光催化剂具有高的光催化活性和稳定性,它可以作为一种高效的光催化剂用于染料废水中亚甲基蓝的降解。 展开更多
关键词 S型 g-C_(3)N_(4)-Bi_(2)WO_(6) 光催化剂 降解 亚甲基蓝
原文传递
Recent advances in photocatalytic overall production of hydrogen peroxide from metal-free photocatalysts
9
作者 Congxu Wang Xuan Xie +3 位作者 Feng Qiu Lei Zhu Imran Shakir Yuxi Xu 《Chinese Chemical Letters》 2026年第1期208-225,共18页
Hydrogen peroxide(H_(2)O_(2)) has been recognized as a green and nonpolluting multifunctional oxidant with extensive applications in environmental protection,metal etching,textile printing and dyeing,chemical synthesi... Hydrogen peroxide(H_(2)O_(2)) has been recognized as a green and nonpolluting multifunctional oxidant with extensive applications in environmental protection,metal etching,textile printing and dyeing,chemical synthesis and food processing.However,over 90 % of industrial H_(2)O_(2) is currently produced through the multi-step anthraquinone oxidation process,which suffers from a process with some drawbacks such as complex,high-energy consumption,and toxic byproducts emissions.Compared to the traditional anthraquinone method,artificial photosynthesis of H_(2)O_(2) using semiconductor photocatalysts has emerged as a sustainable alternative due to its use of water and O_(2) as the clean reactants and sole energy as the driving force.In recent years,metal-free photocatalysts mainly including covalent organic frameworks(COFs),covalent triazine frameworks(CTFs) and carbon nitrile(g-C_(3)N_(4)) have garnered significant interest due to their superior thermal and chemical stability,diverse synthesis methods,tunable functionality,light weight nature and non-toxicity.These materials also exhibit adjustable band structure and unique photoelectric properties.Sustainable efforts have been made to advance metal-free photocatalysts for artificial photosynthesis of H_(2)O_(2),however,a comprehensive summary of current research status on metalfree-based photocatalytic overall H_(2)O_(2) production remain scarce.This review outlines recent process in overall H_(2)O_(2) photosynthesis based on metal-free photocatalysts.First,we introduced the fundamental concepts of photocatalytic overall H_(2)O_(2) production.Then,we analyze representative studies on photocatalytic overall H_(2)O_(2) synthesis using metal-free materials.Finally,we discuss the challenges and future perspectives in this field to guide the design and synthesis of metal-free systems for H_(2)O_(2) generation. 展开更多
关键词 PHOTOCATALYSIS H_(2)O_(2)generation Metal-free photocatalysts Tunable functionality Overall synthesis
原文传递
Fe_(2)O_(3)/Bi_(3)NbO_(7)复合催化剂的制备及其光催化性能研究
10
作者 赵静淳 杨雷 +2 位作者 闻军华 窦银研 申延明 《沈阳化工大学学报》 2026年第2期133-139,共7页
采用水热法制备了不同负载比例的Fe_(2)O_(3)/Bi_(3)NbO_(7)光催化剂,采用XRD、SEM、TEM、BET和UV-Vis等技术对样品进行了表征,考察了Fe_(2)O_(3)复合量、催化剂添加量、染料RhB浓度等因素对RhB降解的影响.结果表明,复合1%(质量分数)Fe_... 采用水热法制备了不同负载比例的Fe_(2)O_(3)/Bi_(3)NbO_(7)光催化剂,采用XRD、SEM、TEM、BET和UV-Vis等技术对样品进行了表征,考察了Fe_(2)O_(3)复合量、催化剂添加量、染料RhB浓度等因素对RhB降解的影响.结果表明,复合1%(质量分数)Fe_(2)O_(3)的复合催化剂的光催化活性最佳,在其添加量为0.3 g/L、RhB初始质量浓度为10 mg/L时,光照3 h后RhB的降解率可达91.0%.降解过程中,·O_(2)^(-)是主要活性基团,而光生空穴为次要活性基团. 展开更多
关键词 铌酸铋 Fe_(2)O_(3) 复合光催化剂 可见光催化
在线阅读 下载PDF
SnO_(2)/ZnO/C_(3)N_(4)复合光催化剂的制备及结构表征
11
作者 尚颖颖 《煤炭与化工》 2026年第3期152-156,160,共6页
针对纯相氮化碳(g-C_(3)N_(4))光催化剂比表面积小、光生电子和空穴复合率高、太阳光利用率低等问题,首次提出通过水热法与煅烧法结合的工艺,在g-C_(3)N_(4)基体中同时引入半导体SnO_(2)和ZnO材料,构建SnO_(2)/ZnO/C_(3)N_(4)复合光催... 针对纯相氮化碳(g-C_(3)N_(4))光催化剂比表面积小、光生电子和空穴复合率高、太阳光利用率低等问题,首次提出通过水热法与煅烧法结合的工艺,在g-C_(3)N_(4)基体中同时引入半导体SnO_(2)和ZnO材料,构建SnO_(2)/ZnO/C_(3)N_(4)复合光催化体系。采用XRD、SEM、DRS及光电化学测试等手段系统表征复合催化剂的晶体结构、微观形貌、光学性能及电荷分离特性。结果表明:SnO_(2)和ZnO成功负载于g-C_(3)N_(4)层状结构表面形成异质结构;5 wt%SnO_(2)/ZnO/C_(3)N_(4)(标记为5-SnZnCN)复合催化剂的晶体结构完整,无杂质相生成;其微观形貌呈现ZnO微米块嵌入g-C_(3)N_(4)层间,SnO_(2)纳米颗粒分散于表面的特征,有效增大比表面积;DRS分析显示,复合催化剂虽因SnO_(2)/ZnO宽带隙特性导致吸收阈值蓝移,但异质结的构建显著提升光生载流子分离效率;光电化学测试中,5-SnZnCN的光电流密度显著高于纯相g-C_(3)N_(4)、SnO_(2)、ZnO及二元ZnO/g-C_(3)N_(4)催化剂,EIS Nyquist弧半径最小,LSV氧化峰值出现最早,证实其具备最优的电荷转移能力和氧化活性。该研究为新型高效复合光催化剂的结构设计与制备工艺优化提供了实验依据。 展开更多
关键词 光催化剂 SnO_(2)/ZnO/C_(3)N_(4) 异质结构 结构表征 光电化学性能
在线阅读 下载PDF
纳米复合光催化剂Ag@TiO_2日光辐照下催化性能 被引量:3
12
作者 林立 周继承 +2 位作者 熊文高 谢放华 廖立明 《化学与生物工程》 CAS 2008年第1期55-57,共3页
对自制Ag@TiO2光催化剂日光下光催化降解甲基橙模拟污染物的可行性进行了研究,探讨了反应时间、pH值、H2O2用量、催化剂浓度和催化剂重复使用对甲基橙光催化降解效果的影响。结果表明,在H2O2协同作用下,Ag@TiO2光催化剂可以快速降解溶... 对自制Ag@TiO2光催化剂日光下光催化降解甲基橙模拟污染物的可行性进行了研究,探讨了反应时间、pH值、H2O2用量、催化剂浓度和催化剂重复使用对甲基橙光催化降解效果的影响。结果表明,在H2O2协同作用下,Ag@TiO2光催化剂可以快速降解溶液中的甲基橙,晴好天气下20 min溶液可褪至无色。 展开更多
关键词 日光 ag@tio2光催化剂 性能 H2O2
在线阅读 下载PDF
Ag@TiO_2核壳纳米粒子的制备与红外发射率研究 被引量:4
13
作者 叶晓云 周钰明 蔡曙光 《徐州工程学院学报(自然科学版)》 CAS 2010年第1期61-66,共6页
在TX-100/环己烷/正己醇/水组成的油包水(W/O)体系中,采用微乳液法制得Ag@TiO2核壳纳米粒子.采用透射电镜(TEM),X线衍射(XRD),红外光谱(IR)和紫外可见光谱(UV-Vis)等对其形貌和物相进行分析.利用IR-1红外发射率测量仪测定复合粒子在8~1... 在TX-100/环己烷/正己醇/水组成的油包水(W/O)体系中,采用微乳液法制得Ag@TiO2核壳纳米粒子.采用透射电镜(TEM),X线衍射(XRD),红外光谱(IR)和紫外可见光谱(UV-Vis)等对其形貌和物相进行分析.利用IR-1红外发射率测量仪测定复合粒子在8~14μm波段的红外发射率.结果表明:该核壳纳米粒子粒径约50 nm,内核为面心立方的金属Ag,外壳为无定型的TiO2.被TiO2包覆后Ag核的紫外共振吸收峰与纯胶体Ag相比发生了微弱红移.高反射性能的金属Ag的引入使该核壳结构复合物的红外发射率明显降低,最低可降至0.483.Ag@TiO2核壳纳米粒子的红外发射率随着外层TiO2结晶性能的提高而下降. 展开更多
关键词 ag@tio2 水热 核壳 红外发射率
在线阅读 下载PDF
可逆光致变色的Ag@TiO_2纳米复合膜(英文)
14
作者 左娟 《材料导报》 EI CAS CSCD 北大核心 2011年第18期6-10,共5页
为了防止活性等离子体对下层银膜的破坏,采用多晶TiO2半导体烧结靶,使用射频磁控溅射方法在纯氩等离子气氛中制备了大面积均匀的TiO2、Ag@TiO2薄膜。为了了解其结构与电子和光学特性间的相互作用,对TiO2和TiO2/Ag/TiO2样品的制备参数(... 为了防止活性等离子体对下层银膜的破坏,采用多晶TiO2半导体烧结靶,使用射频磁控溅射方法在纯氩等离子气氛中制备了大面积均匀的TiO2、Ag@TiO2薄膜。为了了解其结构与电子和光学特性间的相互作用,对TiO2和TiO2/Ag/TiO2样品的制备参数(如射频功率、总压和直流电压的共同影响)进行了研究。采用掠入射X射线衍射、紫外可见吸收、拉曼光谱等技术研究了根据其结构调整光学性能的可能性。结果显示,沉积的TiO2薄膜具有与在氩气和氧气混合气氛中沉积所得薄膜相似的形貌、电子和光学特性、能隙带宽和晶相;且所制备的Ag@TiO2薄膜银具有可逆的光致变色特性,可作为智能窗、多波长光存储器和可擦写高密度电子纸使用。 展开更多
关键词 ag@tio2 纳米复合膜 射频磁控溅射 光致变色
在线阅读 下载PDF
双Z型BiOBr/Bi_(2)O_(3)/Bi_(2)O_(2)CO_(3)光催化剂的合成及其对盐酸四环素的降解性能研究 被引量:3
15
作者 李冬梅 王子霖 +3 位作者 蒋树贤 张文欣 李弈锴 吴汉杰 《环境科学学报》 北大核心 2025年第4期25-36,共12页
以硝酸铋、溴化钾及尿素为前驱体,通过水热、煅烧法合成Bi_(2)O_(3)/Bi_(2)O_(2)CO_(3)异质结(简称BO/BOC).通过化学沉淀法在BO/BOC异质结片层上沉积不同质量分数的BiOBr纳米颗粒,合成BiOBr/BO/BOC复合光催化剂(简称BBB),探讨BiOBr与BO/... 以硝酸铋、溴化钾及尿素为前驱体,通过水热、煅烧法合成Bi_(2)O_(3)/Bi_(2)O_(2)CO_(3)异质结(简称BO/BOC).通过化学沉淀法在BO/BOC异质结片层上沉积不同质量分数的BiOBr纳米颗粒,合成BiOBr/BO/BOC复合光催化剂(简称BBB),探讨BiOBr与BO/BOC的最佳质量比.最后以盐酸四环素(TCH)为目标污染物,研究BBB的光催化活性及其降解性能.结果表明:(1)BiOBr与BO/BOC质量比为2∶1时,对应的BBB-4(记为BBBOPT)的光催化活性最高,在30 min内对TCH的光降解率高达99.7%;(2)BBBOPT的最大光吸收边由430 nm红移至450 nm,禁带宽度由2.77 eV缩窄至2.68 eV,有效降低了光生电子-空穴对的复合率;BiOBr导带中的电子转移至Bi_(2)O_(2)CO_(3)、Bi_(2)O_(3)的价带,BBBOPT异质结属于双Z型结构;(3)BBBOPT稳定性良好,重复使用5次后对TCH的降解效率仍高达88.1%;(4)BBBOPT光催化降解TCH的主要活性物种是·O_(2)^(-),其次是h^(+),·OH最弱;(5)TCH的光降解过程包括去甲基化、羟基化、开环反应、脱酰胺、脱氨基等反应,并最终被氧化为小分子有机物、CO_(2)和H_(2)O. 展开更多
关键词 BiOBr@Bi_(2)O_(3)@Bi_(2)O_(2)CO_(3)三元光催化剂 双Z型异质结 可见光催化活性 TCH降解途径 光降解性能
原文传递
石墨烯/Ag@TiO2共同修饰的染料敏化太阳能电池制备及其性能 被引量:3
16
作者 郭楷模 陈伟 +3 位作者 李明月 何涛 白利华 李美亚 《武汉大学学报(理学版)》 CAS CSCD 北大核心 2018年第5期377-384,共8页
利用水热法制备石墨烯和Ag@TiO2核壳纳米颗粒(nanoparticles,NPs)共同修饰的染料敏化太阳能电池(dye-sensitized solar cell,DSSC),研究石墨烯和Ag@TiO2纳米颗粒对光阳极和DSSC性能的影响.实验结果显示,掺入的Ag@TiO2纳米颗粒质量... 利用水热法制备石墨烯和Ag@TiO2核壳纳米颗粒(nanoparticles,NPs)共同修饰的染料敏化太阳能电池(dye-sensitized solar cell,DSSC),研究石墨烯和Ag@TiO2纳米颗粒对光阳极和DSSC性能的影响.实验结果显示,掺入的Ag@TiO2纳米颗粒质量分数为0.6%时,制备的DSSC性能最优,光电转换效率(photoelectric conversion efficiency,PCE)为5.84%,相比于纯TiO2光阳极DSSC提高了近20%.研究表明,石墨烯/Ag@TiO2染料敏化太阳能电池性能的提高,一方面是由于Ag@TiO2纳米颗粒的掺入增强了染料的光吸收能力;另一方面是由于石墨烯的引入显著改善了光阳极染料的吸附量,加快了载流子的传输,增加了载流子寿命,两者协同显著提高了DSSC的短路电流密度(short-circuit photocurrent density,J(sc))和光电转换效率. 展开更多
关键词 石墨烯 ag@tio2核壳纳米颗粒 染料敏化太阳能电池 局域表面等离子体共振 协同效应
原文传递
用于高介电复合材料的全包裹Ag@TiO2填充颗粒的制备 被引量:3
17
作者 简刚 刘美瑞 +1 位作者 张晨 邵辉 《无机材料学报》 SCIE EI CAS CSCD 北大核心 2019年第6期641-645,共5页
高介电复合材料是近年来受到广泛关注的一种材料,可用于嵌入式电容器及储能器件。本研究使用钛醇盐水解法在室温下制备全包裹Ag@TiO2颗粒,对该颗粒填充的复合材料进行漏电流、介电和储能性能表征,并对其介电机理进行探讨。扫描电子显微... 高介电复合材料是近年来受到广泛关注的一种材料,可用于嵌入式电容器及储能器件。本研究使用钛醇盐水解法在室温下制备全包裹Ag@TiO2颗粒,对该颗粒填充的复合材料进行漏电流、介电和储能性能表征,并对其介电机理进行探讨。扫描电子显微镜和能谱结果显示Ag@TiO2颗粒具有球形的全包裹核壳结构,壳层厚度大约为400nm。X射线衍射结果验证了Ag@TiO2颗粒具有完整的物相。Ag@TiO2填充的聚二甲基硅氧烷复合材料表现出小的漏电流(10^-8A/cm^2)、较大的介电系数(108)、低的介电损耗(0.2%)和较大的储能密度(8.58×10^-3J/cm^3)。有效场和Maxwell相结合的理论模型与实验数据对比验证,推测界面极化作用提高了复合材料的等效介电系数。该颗粒填充的复合材料在嵌入式电容器方面具有潜在的应用价值。 展开更多
关键词 ag@tio2 高介复合材料 界面极化 介电性能
在线阅读 下载PDF
回收混凝土粉末负载TiO_(2)催化剂的制备及光催化性能
18
作者 贾广征 刘思乐 杜文娟 《工业水处理》 北大核心 2025年第11期102-109,共8页
以回收混凝土粉末(RCP)作为载体,TiO_(2)作为光催化活性中心,采用机械化学法制备了RCP/TiO_(2)光催化剂。通过X射线衍射谱(XRD)、N2吸附-脱附曲线、紫外可见漫反射光谱(UV-vis DRS)、光致发光光谱(PL)、瞬态光电流谱(TPC)和电化学交流... 以回收混凝土粉末(RCP)作为载体,TiO_(2)作为光催化活性中心,采用机械化学法制备了RCP/TiO_(2)光催化剂。通过X射线衍射谱(XRD)、N2吸附-脱附曲线、紫外可见漫反射光谱(UV-vis DRS)、光致发光光谱(PL)、瞬态光电流谱(TPC)和电化学交流阻抗谱(EIS)表征了RCP/TiO_(2)光催化剂的物相晶型、比表面积、孔隙结构和光电化学性质,评价了光催化剂在紫外光照射下降解有机染料亚甲基蓝(MB)的活性和稳定性,分析了共存无机盐离子和水基质对RCP/TiO_(2)光催化降解MB效果的影响,研究了体系中的活性物种及活性物种的贡献率。结果表明:RCP的引入提高了光催化剂的比表面积、光谱吸收能力和电荷转移速率,实现了光生载流子的高效分离。紫外光照射90 min,RCP/TiO_(2)催化剂对溶液中MB的光催化降解率达到了99.91%,循环使用10次后对MB的光催化降解率仍为99.10%,表现出良好的循环稳定性。共存无机盐离子和水基质会对RCP/TiO_(2)催化剂的催化活性产生抑制作用。O_(2)^(·-)、·OH、h+等活性物种协同作用实现了对MB的高效降解,光催化反应遵循Type-Ⅱ机理。 展开更多
关键词 TiO_(2) 回收混凝土粉末 光催化剂 亚甲基蓝
在线阅读 下载PDF
负载N-TiO_(2)型光催化剂对水中阴离子合成洗涤剂降解研究
19
作者 王小静 魏麟欢 白欣 《广东化工》 2025年第10期25-27,共3页
本实验采用溶胶—凝胶技术,选择钛酸四丁酯作为钛源、尿素作为氮源合成N-TiO_(2),并将其负载到活性炭球体上。将制备的活性炭球负载N-TiO_(2)型光催化剂应用于降解水中阴离合成洗涤剂,并考察煅烧温度、掺杂N含量、反应时间、反应温度、... 本实验采用溶胶—凝胶技术,选择钛酸四丁酯作为钛源、尿素作为氮源合成N-TiO_(2),并将其负载到活性炭球体上。将制备的活性炭球负载N-TiO_(2)型光催化剂应用于降解水中阴离合成洗涤剂,并考察煅烧温度、掺杂N含量、反应时间、反应温度、酸碱度、催化剂用量等条件对降解率的影响。实验结果表明,N元素掺杂可有效提高TiO_(2)可见光光催化活性,实现可见光下降解能力,对初始浓度为1 mg/L的阴离子合成洗涤剂光催化降解30min后,其降解率最高达到90%。结果证明制备的活性炭球负载N-TiO_(2)型光催化剂对水中阴离子合成洗涤剂具有较好的降解作用。 展开更多
关键词 N掺杂 TiO_(2) 光催化剂 阴离子合成洗涤剂 降解研究
在线阅读 下载PDF
负载型改性TiO_(2)光催化降解水中布洛芬的研究
20
作者 魏婕 巩法涛 王淑晋 《水处理技术》 北大核心 2025年第8期68-76,共9页
以TiO_(2)为光催化剂,玻璃纤维布(GFC)为载体材料,通过溶胶凝胶法及浸渍涂覆法制得Fe、S共掺杂的Fe-S/TiO_(2)/GFC光催化剂。采用SEM、XRD、XPS、UV-vis等手段对其进行分析表征。单因素实验结果表明,当布洛芬溶液初始pH、光照强度、布... 以TiO_(2)为光催化剂,玻璃纤维布(GFC)为载体材料,通过溶胶凝胶法及浸渍涂覆法制得Fe、S共掺杂的Fe-S/TiO_(2)/GFC光催化剂。采用SEM、XRD、XPS、UV-vis等手段对其进行分析表征。单因素实验结果表明,当布洛芬溶液初始pH、光照强度、布洛芬的初始浓度、催化剂的投加量分别为5、54 000 lux、10 mg/L、0.15 g时,布洛芬的降解率最大,分别为80.7%、80.71%、81.64%、82.11%。再通过响应面模型分析得出布洛芬降解的最佳条件为布洛芬溶液pH为5.4、布洛芬溶液初始浓度10.31 mg/L、催化剂的投加量为0.15 g,此时的布洛芬降解率为80.04%。验证实验发现优化后实际响应值与预测的响应值间差距约为0.5%,表明响应面模型具有较好的拟合性,具有可靠性。自然水体中常见的阳离子如Na^(+)、K^(+)、Ca^(2+)和Mg^(2+)对布洛芬的降解过程几乎无影响,常见的阴离子中Cl^(-)和HCO_(3)^(-)对布洛芬的降解有明显的抑制作用,SO42-的影响很小,而NO_(3)^(-)会促进布洛芬的降解。 展开更多
关键词 TiO_(2)光催化剂 铁硫掺杂改性 玻璃纤维布负载 布洛芬
原文传递
上一页 1 2 29 下一页 到第
使用帮助 返回顶部