As a common electronic adhesive,ultraviolet(UV)curing polyurethane acrylate adhesive has both flexibility and wear resistance of polyurethane,excellent weather resistance and optical properties of acrylate.Despite the...As a common electronic adhesive,ultraviolet(UV)curing polyurethane acrylate adhesive has both flexibility and wear resistance of polyurethane,excellent weather resistance and optical properties of acrylate.Despite the extensive applications,it is still difficult to solve the problems caused by the shrinkage of adhesive.Here,a new type of photosensitive adhesive for bonding electronic components based on supramolecular interaction was designed and synthesized.The supramolecular interaction of cyclodextrin and adamantane moieties introduced into the adhesive polymer entitles the viscosity of the adhesive to rise rapidly during use,thereby preventing adhesive loss and dislocation of electronic components.UV light could further cure the adhesive and position the electronic components.The adhesive shrunk<2%when cured by UV light,so it can be used for electronic packaging and high-resolution,defect-free lithography.展开更多
The effect of antibacterial adhesive on the biological corrosion resistance of mortar in seawater environment was studied by means of scanning electron microscope,thermogravimetric analysis,X-ray diffraction,Fourier t...The effect of antibacterial adhesive on the biological corrosion resistance of mortar in seawater environment was studied by means of scanning electron microscope,thermogravimetric analysis,X-ray diffraction,Fourier transform infrared spectroscopy,and ultra-depth microscope.The results show that the antibacterial adhesive can effectively inhibit the growth of sulfur-oxidizing bacteria in seawater,hinder their metabolism to produce biological sulfate,and reduce the formation of destructive product gypsum.The mineral composition and thermal analysis showed that the peak value of plaster diffraction peak and the mass loss of plaster dehydration in antibacterial adhesive group were significantly lower than those in blank group(without protective coating group).In addition,the electric flux of chloride ions(>400 C)in the blank group of mortar samples was higher than that in the antibacterial adhesive group(<200 C),indicating that the antibacterial adhesive can effectively reduce the permeability of chloride ions in mortar,and thus hinder the Cl-erosion in seawater.展开更多
We proposed a strategy using high-concentration tannic acid(TA) solutions to form robust and dense supramolecular networks in hydrogels,driven by the high osmotic pressure of the TA solution.The resulting hydrogels ar...We proposed a strategy using high-concentration tannic acid(TA) solutions to form robust and dense supramolecular networks in hydrogels,driven by the high osmotic pressure of the TA solution.The resulting hydrogels are both transparent and tough,with highly compacted networks.The hydrogels exhibit an ultimate tensile strength of approximately 4.55 MPa and a toughness of 160 MJ/m^(3).Additionally,the hydrogels adhere to a wide range of substrates,including metals,ceramics,glass,and even Teflon,with an adhesion strength of up to 42 kPa on Teflon plates.Given the biocompatibility and biodegradability of both PVA and TA,along with the hydrogels' toughness,transparency,and adhesiveness,we anticipated broad applications in the biomedical field,such as in articular cartilage restoration,electronic skin,and wound dressings.Additionally,these hydrogels hold significant potential for applications in wearable technology and optoelectronic devices.展开更多
The net capturing method holds great potential for space debris removal due to its adaptability to the various target shapes and high fault tolerance.However,the capture mechanisms of current rope nets,which rely sole...The net capturing method holds great potential for space debris removal due to its adaptability to the various target shapes and high fault tolerance.However,the capture mechanisms of current rope nets,which rely solely on a passive wrap-ping mechanism,limit their capacity to capture objects within a specific size range and make it challenging to handle unexpected situations.Inspired by spider webs,which combine wrapping and adhering to capture prey of various sizes,we present a new type of net(envelope diameter:208.49 mm)for on-orbit capture.This net adopts a spiral symmetric structure similar to spider webs,incorporates electrostatic-microstructure hybrid adhesives,and increases the maximum contact area by 38.31%,allowing it to capture debris ranging from fragments smaller than the mesh size(envelope diam-eter:2.7 mm-4.4 mm)to larger objects(envelope diameter:270 mm),and effectively grasps flexible items(450 mm2),planar items(350 mm2)and three-dimensional items(160 mm3).Moreover,to validate the net's capability for wrapping and adhesion,simulations and experiments are demonstrated that this dual capture method can effectively handle various targets.展开更多
Driven by the trend of device miniaturization and high-density integration,the interaction between adjacent electrodes has become a critical factor affecting the interfacial reliability of thermoelectric(TE)structures...Driven by the trend of device miniaturization and high-density integration,the interaction between adjacent electrodes has become a critical factor affecting the interfacial reliability of thermoelectric(TE)structures.This study investigates the influence of adjoining electrode interactions on the interfacial response of a multi-electrode/TE substrate structure,including interfacial stresses and stress intensity factors at the electrode ends.To solve the corresponding boundary-value problem,the Fourier transforms are adopted to derive a governing integro-differential equation for the interfacial shear stress in multi-electrode systems,incorporating the TE effects as generalized forces on the right-hand side.The results show that both the interfacial tension and transverse stress in the electrodes are significantly affected by the presence of adjacent electrodes.The interaction between neighboring electrodes diminishes as their spacing increases or when an adhesive interlayer is introduced.Furthermore,the softer and thinner electrodes,the softer and thicker adhesive interlayer,and the smaller TE loads are found to be beneficial for improving the interfacial performance.These findings may contribute to the accurate measurement in surface sensors and layout design of multi-point health monitoring systems for TE structures.展开更多
Silicone-based pressure-sensitive adhesives(Si-PSAs)are valued for their thermal stability,flexibility,and biocompatibility,but their weak bonding strength restricts high-performance use.Polyurethane-modified Si-PSAs ...Silicone-based pressure-sensitive adhesives(Si-PSAs)are valued for their thermal stability,flexibility,and biocompatibility,but their weak bonding strength restricts high-performance use.Polyurethane-modified Si-PSAs enhance adhesion,however diisocyanates remain essential.The raw materials of isocyanates are toxic,and their synthesis involves phosgene.To make up for those shortcomings,a series of poly(hydroxy urethane-siloxane)PSAs,named as PHUSi here,were synthesized through the ring-opening reaction of cyclic carbonate-functionalized polysiloxanes(PSi_(x)-VEC_(z))with various aliphatic diamines.The PSi_(x)-VEC_(z) precursors were prepared via the hydrosilylation of hydrogen-containing polysiloxanes(PSi_(x)-H_(y))with 4-vinyl-1,3-dioxolan-2-one(VEC).The chemical structures of PSi_(x)-H_(y),PSi_(x)-VEC_(z) and PHUSi were characterized,and bonding properties of PHUSi were systematically evaluated.The influence of architectures on adhesive performance was elucidated through comprehensive analyses,including rheology,crosslink density assessment,and so on.These studies revealed that the tailored design of PHUSi adhesives combine the advantages of traditional Si-PSAs with enhanced adhesion while eliminating isocyanate toxicity.The optimized PHUSi formulation achieved remarkable 180°peel strength(76.5 N/m on skin)and maximum probe tack force(1.61 N),enabling secure 24 h attachment of flexible sensors to skin.These properties make PHUSi particularly suitable for medical applications,as demonstrated by successful implementation in flexible electrocardiogram devices,offering a biocompatible,high-performance adhesive.展开更多
This study explores the use of black soldier fly larvae protein as a bio-based adhesive to produce particleboards from sugarcane bagasse.A comprehensive evaluation was conducted,including rheological characterization ...This study explores the use of black soldier fly larvae protein as a bio-based adhesive to produce particleboards from sugarcane bagasse.A comprehensive evaluation was conducted,including rheological characterization of the adhesive and physical–mechanical testing of the panels according to European standards.The black soldier fly larvae-based adhesive exhibited gel-like viscoelastic behavior,rapid partial structural recovery after shear,and favorable application properties.Particleboards manufactured with this adhesive and sugarcane bagasse achieved promising mechanical performance,with modulus of rupture and modulus of elasticity values of 30.2 and 3500 MPa,respectively.Internal bond strength exceeded 0.4 MPa,complying with European standard 312-3 specifications.For comparative purposes,a panel made with Eucalyptus grandis particles was also produced under the same conditions to demonstrate the versatility of the adhesive system.Compared to other bio-based and synthetic adhesives,this bio-based system showed competitive performance and derives from the bioconversion of organic residues.Protein adhesives were synthesized fromHermetia illucens larvae grown commercially on agriculturalwaste frompotato chip production,emphasizing the renewable origin of both the biomass and the final adhesive.These results highlight the potential of insect proteins as sustainable and circular alternatives for the wood panel industry.展开更多
This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a ...This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a general part covering the grand lines and more in-depth views of more recent tannin,lignin,carbohydrate and soy bioadhesives,somemix of the other bio raw materials with soy protein and soy flour and some other differently sourced bioadhesives for wood,this review presents a more in-depth part on starch-based wood adhesives and a more indepth part covering plant protein-based adhesives.It must be kept in mind that the review is focused on completely or almost completely biosourced adhesives,the fashionable adhesives derived from mixes of biosourced materials with synthetic resins having been intentionally excluded.This choice was made as the latter constitute only an intermediate interval,possibly temporary if even for a somewhat long times,towards a final full bioeconomy of scale in this field.This review also focuses on more recent results,mainly obtained in the last 10–20 years,thus on adhesive formulations really innovative and sometimes even non-traditional.In all these fields there is still a lot of possibility of innovation for relevant formulation as this field is still in rapid growth.展开更多
Polymeric materials which can undergo controlled degradation and recycling are of great significance for a sustainable society.Although tremendous progress has been made in the degradation and recycling of both thermo...Polymeric materials which can undergo controlled degradation and recycling are of great significance for a sustainable society.Although tremendous progress has been made in the degradation and recycling of both thermoplastic and thermoset plastics,the development of high-performance degradable polymer adhesives is rare.Here,we have prepared high-performance nucleobase-containing thioctic acid-based supramolecular polymer adhesives through free radical polymerization.The specific hydrogen-bonding interactions between complementary nucleobases greatly improve the weak cohesion of the thioctic acid-based polymers and enhance the environmental stability of the thioctic acidbased polymers simultaneously.Degradation of the nucleobase-containing thioctic acid-based supramolecular polymers is achieved by the reduction of the disulfide backbone,and the cycle of degradation and repolymerization is further achieved via oxidative polymerization.The adhesion strength of the nucleobase-containing thioctic acid-based supramolecular polymers after two cycles of degradation and repolymerization still reaches as high as 4.7±0.3 MPa.This work provides an approach for the development of environmentally stable and high-performance degradable thioctic acid-based adhesives.展开更多
As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(H...As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(HKL)is limited due to its poor crosslinking reactivity.Hence,for the first time,the present study reports the facile oxidation of HKL involving a redox reaction with silver-ammonia complexes([(AgNH3)2]+),primarily focusing on oxidation to produce reactive quinones and promote C-C linkages during reaction.This study aims to increases reactivity of oxidized HKL for effective crosslinking with monoethanolamine(MEA)for the development of bio-based wood adhesives.The characterization,including 13C-nuclear magnetic resonance(NMR)and Fourier transform infrared(FT-IR)spectroscopy,confirms the oxidation reaction,such as the formation of quinones(C=O)and subsequent crosslinking between the oxidized HKL molecules and MEA.Additionally,gel permeation chromatography(GPC)confirms the C-C and C-O linkages with increased molecular weight after oxidation,and is supported by differential scanning calorimetry(DSC)which shows the exothermic reaction due to the crosslinking of the oxidized HKL molecules via condensation to form C-C and C-O linkages.The crosslinked HKL/MEA-based adhesives underwent mild reaction and achieved a maximum dry shear strength of 0.77 MPa,which exceeds the standard requirement of 0.6 MPa.These findings demonstrate not only a one-pot oxidation for improving the reactivity of HKL using silver complexes,but also its facile crosslinking with MEA for sustainable bio-based wood adhesives.展开更多
The ability of queens and males of most ant species to disperse by flight has fundamentally contributed to the group’s evolutionary and ecological success and is a determining factor to take into account for biogeogr...The ability of queens and males of most ant species to disperse by flight has fundamentally contributed to the group’s evolutionary and ecological success and is a determining factor to take into account for biogeographic studies(Wagner and Liebherr 1992;Peeters and Ito 2001;Helms 2018).展开更多
The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on ...The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on untangling the underlying impact of varying adhesive cohesive or adhesion properties is limited and sometimes appears to provide conflicting conclusions.Comparison between the available studies is also often difficult due to variations in armour systems or ballistic testing being conducted.This review scrutinises the available research,identifying six critical properties of an adhesive layer in determining ballistic performance:elastic modulus,fracture strain,acoustic impedance,tensile bond strength,shear bond strength,and thickness.The impact of each of these properties on ballistic performance is discussed in detail,with clear description of the underlying processes involved,allowing clear optimisation goals to be established depending on the ceramic armour specification.展开更多
Hydrogel-based flexible sensors are emerging as ideal candidates for wearable devices and soft robotics.However,most current hydrogels possess limited physicochemical properties,which hinder their practical applicatio...Hydrogel-based flexible sensors are emerging as ideal candidates for wearable devices and soft robotics.However,most current hydrogels possess limited physicochemical properties,which hinder their practical application in long-term and complex scenarios.Herein,inspired by the unique structure of the barnacle,we design multifunctional poly(DMAPA-co-PHEA)hydrogels(CP hydrogels)by employing multiple physical crosslinks in the presence of Ag nanoparticles and NaCl additives.Owing to the synergistic effect of cation-πinteractions,hydrophobic interactions,and ionic bonds,the CP hydrogels exhibit high stretchability(strain up to 1430%),strong adhesion(22.8 kPa),satisfactory antibacterial activity,stable anti-icing ability(<20 kPa after 20 icing-deicing cycles),and high electrical conductivity(18.5 mS/cm).Additionally,the CP hydrogels show fast and sensitive responsiveness and cycling stability and can attach directly to human skin to accurately detect both human motions and tiny physiological signals as a flexible wearable sensor.Collectively,this work significantly contributes a straightforward and efficient design strategy for the development of multifunctional hydrogels,broadening their application scenarios.展开更多
Background:Postoperative complications,particularly those involving lymphatic drainage,remain a significantchallenge for patients undergoing axillary lymphadenectomy(ALND)as part of breast cancer surgery.Thesecomplica...Background:Postoperative complications,particularly those involving lymphatic drainage,remain a significantchallenge for patients undergoing axillary lymphadenectomy(ALND)as part of breast cancer surgery.Thesecomplications can delay the initiation of adjuvant therapies,increase healthcare costs,and negatively affectpatients’quality of life.This study evaluated the use of a latex-based tissue adhesive(LTA)as an intraoperativestrategy to prevent seroma formation and prolonged lymphorrhea following axillary dissection.Methods:In this prospective study,65 female patients diagnosed with stage Ⅱb-Ⅲ breast cancer and clinicallyconfirmed axillary lymph node involvement were enrolled.Participants were divided into two groups.The studygroup(n=33)received an intraoperative application of LTA without drainage,while the control group(n=32)underwent standard ALND with placement of a silicone vacuum drain.Postoperative outcomes assessed includedlymphatic drainage volume,number of aspirations,duration of lymphorrhea,length of hospital stay,and incidence of complications.Results:Use of the LTA significantly reduced both the volume and duration of postoperative lymphorrhea.Bypostoperative day 10,the average wound exudate volume in the LTA group was 8.2±3.3 mL,compared to54.1±3.9 mL in the control group—an 84.8%reduction.The LTA group also experienced shorter hospital staysand fewer cases of postoperative seroma requiring intervention.Conclusion:LTA appears to be a safe,effective,and practical intraoperative technique for preventing lymphaticcomplications after ALND.Its use may reduce dependence on drainage systems,shorten hospitalization,andsupport earlier initiation of adjuvant therapies,ultimately improving surgical outcomes and patient recovery.展开更多
The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing ad...The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing adhesives(ESOx-FPF)were designed and synthesized by crosslinking two prepolymers,FPF-B(derived from side-chain fluorinated diol,isocyanate,and aminoboric acid)and ESO-B(synthesized from biobased epoxy soybean oil and aminoboric acid),through dynamic boro-oxygen bonds.The resulting adhesive exhibited an optimal tensile strength of 42 MPa and the shear strength on steel plates reached as high as 3.89 MPa.More importantly,benefiting from the dynamic reversibility of the boron-oxygen bonds along with the hydrogen bonds interaction,ESOx-FPF can be welded with the assistance of solvents and recycled for multiple cycles.The outstanding healing efficiency and excellent reprocessability of these functional adhesives were confirmed by mechanical testing.Moreover,the as-prepared adhesives demonstrated universal and remarkable adhesion to various substrates,such as aromatic polyamide,aluminum plates and polycarbonate,meanwhile,they could be easily disassembled and recycled using ethanol without damaging the substrates surface.This study not only provides a simple strategy for the synthesis of eco-friendly adhesives with weldable and recyclable properties,but also sheds light on the development of other functional materials utilizing dynamic covalent chemistry.展开更多
Wound dressings with tissue adhesion,good mechanical,antioxidant and anti-inflammatory performance are urgently needed.In this work,we present a multifunctional selenium nanoparticles(SeNPs)/citric acid/gelatin/hydrox...Wound dressings with tissue adhesion,good mechanical,antioxidant and anti-inflammatory performance are urgently needed.In this work,we present a multifunctional selenium nanoparticles(SeNPs)/citric acid/gelatin/hydroxysuccinimide-grafted polyacrylic acid nanocomposite hydrogel adhesive(SCA) specifically designed for wound healing applications.The SCA was prepared via a one-pot processing,where SeNPs synthesized via chemical reduction were incorporated.These SeNPs not only endowed SCA with robust wet adhesion ability,excellent stretchability,and skin-matched elasticity modulus by serving as a physical crosslinker to modulate swelling equilibrium and molecular slippage,but also enhanced the biocompatibility and free radical scavenging capacity of SCA.Furthermore,in vivo evaluation of full-thickness cutaneous defects of rats revealed that SCA effectively reduced inflammation,promoted wound closure,and increased collagen deposition.All these results demonstrated that the developed SCA offers a promising therapeutic strategy for wound healing applications.展开更多
The protection effectiveness of traditional Lightning Strike Protection(LSP)for composite rotor blade of helicopter can be diminished due to the explosion risk in overlapping attachment under lightning strike,so a new...The protection effectiveness of traditional Lightning Strike Protection(LSP)for composite rotor blade of helicopter can be diminished due to the explosion risk in overlapping attachment under lightning strike,so a new protection method based on Air Breakdown and insulating adhesive layer(AB-LSP method)was designed to avoid it.In this study,a numerical method was developed to simulate the electrical breakdown,and verified by experiment results.Based on this method,a Finite Element Model(FEM)was established to investigate the effect of two factors(breakdown strength and initial ablation temperature of adhesive layer)on the LSP effectiveness.The results show that the breakdown strength impacts more to the ablation damage in composite than that of high-temperature resistance.Then,another FEM was established to predict the ablation damage by lightning strike in the AB-LSP method protected composite rotor blade.The mechanisms and potential key parameters(magnitude of lightning current,discharge channel location,adhesive layer thickness,and air gap width)that could affect the protection effectiveness were analyzed.The introduction of air breakdown changes the current conduction path and reduces explosion risk.After rational design,this method can offer effective lightning protection for composite helicopter rotor blade and other composite structures.展开更多
BACKGROUND Ultrasound classification can be used to determine the severity of adhesive intestinal obstruction and to guide the formulation of treatment plans.AIM To explore the value of ultrasound classification in di...BACKGROUND Ultrasound classification can be used to determine the severity of adhesive intestinal obstruction and to guide the formulation of treatment plans.AIM To explore the value of ultrasound classification in disease judgment and treatment plan formulation for patients with adhesive intestinal obstruction.METHODS The medical records of 120 patients with adhesive intestinal obstruction presenting at Taihe Hospital Affiliated with Hubei Medical College were retrospectively analyzed from January 2022 to January 2024 according to the severity of ultrasound images,divided into simple(mild),complex(moderate),and critical(severe),analyzing the imaging characteristics of patients with different ultrasound classifications,and developing the corresponding treatment plan according to the ultrasound typing results,that is,conservative treatment and surgical treatment,contrast the ultrasound signs of patients in the conservative vs surgical treatment groups,and the value of ultrasound classification in the treatment of adhesive ileus.RESULTS Among the 120 patients,P>0.05,compared with the general data(sex,age,body quality index,time to onset,and history of onset),the proportion of bowel distension and abdominal effusion(P>0.05),and the proportion of adhesion mass and cross-cross in the conservative treatment group,P<0.05.CONCLUSION Ultrasound typing can aid in the clinical evaluation of the severity of adhesive intestinal obstruction and provide an imaging reference for clinicians to develop targeted treatment plans.展开更多
Soft actuators are inherently flexible and compliant,traits that enhance their adaptability to diverse environments and tasks.However,their low structural stiffness can lead to unpredictable and uncontrollable complex...Soft actuators are inherently flexible and compliant,traits that enhance their adaptability to diverse environments and tasks.However,their low structural stiffness can lead to unpredictable and uncontrollable complex deformations when substantial force is required,compromising their load-bearing capacity.This work proposes a novel method that uses gecko setae-inspired adhesives as interlayer films to construct a layer jamming structure to adjust the stiffness of soft actuators.The mechanical behavior of a single tilted microcylinder was analyzed using the energy method to determine the adhesion force of the adhesives.The gecko-inspired adhesive was designed under the guidance of the adhesion force model.Testing under various loads and directions revealed that the tilted characteristic of microcylinders can enhance the adhesion force in its grasping direction.The adhesive demonstrated excellent adhesion performance compared to other typical adhesives.A tunable stiffness actuator using gecko setae-inspired adhesives(TSAGA),was developed with these adhesives serving as interlayer films.The stiffness model of TSAGA was derived by analyzing its axial compression force.The results of stiffness test indicate that the adhesives serve as interlayer films can adjust the stiffness in response to applied load.TSAGA was compared with other typical soft actuators in order to evaluate the stiffness performance,and the results indicate that TSAGA exhibits the highest stiffness and the widest tunable stiffness range.This demonstrates the superior performance of the setae-inspired adhesives as interlayer films in terms of stiffness adjustment.展开更多
This paper comprehensively explores the technical principles and application practice of Sainaoning absorbable dural sealant medical adhesive in dural closure.It elaborates on the research and development background o...This paper comprehensively explores the technical principles and application practice of Sainaoning absorbable dural sealant medical adhesive in dural closure.It elaborates on the research and development background of Sainaoning,analyzes its composition,action mechanism,and product characteristics in detail,and presents the results of pre-clinical and clinical studies.The application of Sainaoning in different craniotomy surgeries is discussed,and its effectiveness and safety are evaluated.The paper also analyzes the challenges in its application and proposes corresponding countermeasures,aiming to provide a comprehensive understanding and reference for the clinical use and further development of Sainaoning.展开更多
基金support from the National Natural Science Foundation of China(No.22308279)Guangdong Basic and Applied Basic Research Foundation(No.2021A1515110695)Natural Science Foundation of Chongqing(No.2023NSCQMSX2773).
文摘As a common electronic adhesive,ultraviolet(UV)curing polyurethane acrylate adhesive has both flexibility and wear resistance of polyurethane,excellent weather resistance and optical properties of acrylate.Despite the extensive applications,it is still difficult to solve the problems caused by the shrinkage of adhesive.Here,a new type of photosensitive adhesive for bonding electronic components based on supramolecular interaction was designed and synthesized.The supramolecular interaction of cyclodextrin and adamantane moieties introduced into the adhesive polymer entitles the viscosity of the adhesive to rise rapidly during use,thereby preventing adhesive loss and dislocation of electronic components.UV light could further cure the adhesive and position the electronic components.The adhesive shrunk<2%when cured by UV light,so it can be used for electronic packaging and high-resolution,defect-free lithography.
基金Funded by the National Natural Science Foundation of China(Nos.52278269,52278268,52178264)Tianjin Outstanding Young Scholars Science Fund Project(No.22JCJQJC00020)Key Project of Tianjin Natural Science Foundation(No.23JCZDJC00430)。
文摘The effect of antibacterial adhesive on the biological corrosion resistance of mortar in seawater environment was studied by means of scanning electron microscope,thermogravimetric analysis,X-ray diffraction,Fourier transform infrared spectroscopy,and ultra-depth microscope.The results show that the antibacterial adhesive can effectively inhibit the growth of sulfur-oxidizing bacteria in seawater,hinder their metabolism to produce biological sulfate,and reduce the formation of destructive product gypsum.The mineral composition and thermal analysis showed that the peak value of plaster diffraction peak and the mass loss of plaster dehydration in antibacterial adhesive group were significantly lower than those in blank group(without protective coating group).In addition,the electric flux of chloride ions(>400 C)in the blank group of mortar samples was higher than that in the antibacterial adhesive group(<200 C),indicating that the antibacterial adhesive can effectively reduce the permeability of chloride ions in mortar,and thus hinder the Cl-erosion in seawater.
基金Funded by the Guangdong Major Project of Basic and Applied Basic Research(No.2021B0301030001)the National Key Research and Development Program of China(No. 2021YFB3802300)the National Natural Science Foundation of China(Nos. 52403153 and 52203169)。
文摘We proposed a strategy using high-concentration tannic acid(TA) solutions to form robust and dense supramolecular networks in hydrogels,driven by the high osmotic pressure of the TA solution.The resulting hydrogels are both transparent and tough,with highly compacted networks.The hydrogels exhibit an ultimate tensile strength of approximately 4.55 MPa and a toughness of 160 MJ/m^(3).Additionally,the hydrogels adhere to a wide range of substrates,including metals,ceramics,glass,and even Teflon,with an adhesion strength of up to 42 kPa on Teflon plates.Given the biocompatibility and biodegradability of both PVA and TA,along with the hydrogels' toughness,transparency,and adhesiveness,we anticipated broad applications in the biomedical field,such as in articular cartilage restoration,electronic skin,and wound dressings.Additionally,these hydrogels hold significant potential for applications in wearable technology and optoelectronic devices.
基金the New Chongqing Innovative Young Talent Project under Grant 2024NSCQ-qncxX0468Dreams Foundation of Jianghuai Advance Technology Center under Grant 2023-ZM01Z007.
文摘The net capturing method holds great potential for space debris removal due to its adaptability to the various target shapes and high fault tolerance.However,the capture mechanisms of current rope nets,which rely solely on a passive wrap-ping mechanism,limit their capacity to capture objects within a specific size range and make it challenging to handle unexpected situations.Inspired by spider webs,which combine wrapping and adhering to capture prey of various sizes,we present a new type of net(envelope diameter:208.49 mm)for on-orbit capture.This net adopts a spiral symmetric structure similar to spider webs,incorporates electrostatic-microstructure hybrid adhesives,and increases the maximum contact area by 38.31%,allowing it to capture debris ranging from fragments smaller than the mesh size(envelope diam-eter:2.7 mm-4.4 mm)to larger objects(envelope diameter:270 mm),and effectively grasps flexible items(450 mm2),planar items(350 mm2)and three-dimensional items(160 mm3).Moreover,to validate the net's capability for wrapping and adhesion,simulations and experiments are demonstrated that this dual capture method can effectively handle various targets.
基金Project supported by the National Natural Science Foundation of China(Nos.12502117,12272269,11972257)the Natural Science Foundation of Ningxia of China(No.2024AAC03018)+1 种基金the Fundamental Research Funds for the Central Universitiesthe Shanghai Gaofeng Project for University Academic Program Development。
文摘Driven by the trend of device miniaturization and high-density integration,the interaction between adjacent electrodes has become a critical factor affecting the interfacial reliability of thermoelectric(TE)structures.This study investigates the influence of adjoining electrode interactions on the interfacial response of a multi-electrode/TE substrate structure,including interfacial stresses and stress intensity factors at the electrode ends.To solve the corresponding boundary-value problem,the Fourier transforms are adopted to derive a governing integro-differential equation for the interfacial shear stress in multi-electrode systems,incorporating the TE effects as generalized forces on the right-hand side.The results show that both the interfacial tension and transverse stress in the electrodes are significantly affected by the presence of adjacent electrodes.The interaction between neighboring electrodes diminishes as their spacing increases or when an adhesive interlayer is introduced.Furthermore,the softer and thinner electrodes,the softer and thicker adhesive interlayer,and the smaller TE loads are found to be beneficial for improving the interfacial performance.These findings may contribute to the accurate measurement in surface sensors and layout design of multi-point health monitoring systems for TE structures.
基金financially supported by the Shandong Provincial Natural Science Foundation,China(Nos.ZR2022MB051 and ZR2021MB112)Postdoctoral Science Foundation of China(No.2022M712343)+2 种基金Jinan City University Integration Development Strategy Project(No.JNSX2024030)Key Laboratory of Special Functional Aggregates of the Ministry of Education,Shandong University(No.JJT-2023-02)Shandong SD-Link New Material Technology Co.,LTD.
文摘Silicone-based pressure-sensitive adhesives(Si-PSAs)are valued for their thermal stability,flexibility,and biocompatibility,but their weak bonding strength restricts high-performance use.Polyurethane-modified Si-PSAs enhance adhesion,however diisocyanates remain essential.The raw materials of isocyanates are toxic,and their synthesis involves phosgene.To make up for those shortcomings,a series of poly(hydroxy urethane-siloxane)PSAs,named as PHUSi here,were synthesized through the ring-opening reaction of cyclic carbonate-functionalized polysiloxanes(PSi_(x)-VEC_(z))with various aliphatic diamines.The PSi_(x)-VEC_(z) precursors were prepared via the hydrosilylation of hydrogen-containing polysiloxanes(PSi_(x)-H_(y))with 4-vinyl-1,3-dioxolan-2-one(VEC).The chemical structures of PSi_(x)-H_(y),PSi_(x)-VEC_(z) and PHUSi were characterized,and bonding properties of PHUSi were systematically evaluated.The influence of architectures on adhesive performance was elucidated through comprehensive analyses,including rheology,crosslink density assessment,and so on.These studies revealed that the tailored design of PHUSi adhesives combine the advantages of traditional Si-PSAs with enhanced adhesion while eliminating isocyanate toxicity.The optimized PHUSi formulation achieved remarkable 180°peel strength(76.5 N/m on skin)and maximum probe tack force(1.61 N),enabling secure 24 h attachment of flexible sensors to skin.These properties make PHUSi particularly suitable for medical applications,as demonstrated by successful implementation in flexible electrocardiogram devices,offering a biocompatible,high-performance adhesive.
基金supported by the Consejo Nacional de Investigaciones Cientificas y Tecnicas(CONICET)via grant Proyectos de Investigacion Plurianuales(PIP 2021:2894)Agencia I+D+i via grant Proyectos de Investigacion Cientifica y Tecnologica(PICT-2021-I-A-00294).
文摘This study explores the use of black soldier fly larvae protein as a bio-based adhesive to produce particleboards from sugarcane bagasse.A comprehensive evaluation was conducted,including rheological characterization of the adhesive and physical–mechanical testing of the panels according to European standards.The black soldier fly larvae-based adhesive exhibited gel-like viscoelastic behavior,rapid partial structural recovery after shear,and favorable application properties.Particleboards manufactured with this adhesive and sugarcane bagasse achieved promising mechanical performance,with modulus of rupture and modulus of elasticity values of 30.2 and 3500 MPa,respectively.Internal bond strength exceeded 0.4 MPa,complying with European standard 312-3 specifications.For comparative purposes,a panel made with Eucalyptus grandis particles was also produced under the same conditions to demonstrate the versatility of the adhesive system.Compared to other bio-based and synthetic adhesives,this bio-based system showed competitive performance and derives from the bioconversion of organic residues.Protein adhesives were synthesized fromHermetia illucens larvae grown commercially on agriculturalwaste frompotato chip production,emphasizing the renewable origin of both the biomass and the final adhesive.These results highlight the potential of insect proteins as sustainable and circular alternatives for the wood panel industry.
文摘This review is composed of three main parts each of which is written by well-known top specialists that have been,in a way or other,also the main participants of the majority of the developments reported.Thus,after a general part covering the grand lines and more in-depth views of more recent tannin,lignin,carbohydrate and soy bioadhesives,somemix of the other bio raw materials with soy protein and soy flour and some other differently sourced bioadhesives for wood,this review presents a more in-depth part on starch-based wood adhesives and a more indepth part covering plant protein-based adhesives.It must be kept in mind that the review is focused on completely or almost completely biosourced adhesives,the fashionable adhesives derived from mixes of biosourced materials with synthetic resins having been intentionally excluded.This choice was made as the latter constitute only an intermediate interval,possibly temporary if even for a somewhat long times,towards a final full bioeconomy of scale in this field.This review also focuses on more recent results,mainly obtained in the last 10–20 years,thus on adhesive formulations really innovative and sometimes even non-traditional.In all these fields there is still a lot of possibility of innovation for relevant formulation as this field is still in rapid growth.
基金supported by the National Natural Science Foundation of China(Nos.22273098,22373003,22103002 and 52033001)the Key Project of Anhui Province Science and Technology Innovation Platform(No.202305a12020030)the financial support from the Anhui Provincial Natural Science Foundation(No.2408085Y004)。
文摘Polymeric materials which can undergo controlled degradation and recycling are of great significance for a sustainable society.Although tremendous progress has been made in the degradation and recycling of both thermoplastic and thermoset plastics,the development of high-performance degradable polymer adhesives is rare.Here,we have prepared high-performance nucleobase-containing thioctic acid-based supramolecular polymer adhesives through free radical polymerization.The specific hydrogen-bonding interactions between complementary nucleobases greatly improve the weak cohesion of the thioctic acid-based polymers and enhance the environmental stability of the thioctic acidbased polymers simultaneously.Degradation of the nucleobase-containing thioctic acid-based supramolecular polymers is achieved by the reduction of the disulfide backbone,and the cycle of degradation and repolymerization is further achieved via oxidative polymerization.The adhesion strength of the nucleobase-containing thioctic acid-based supramolecular polymers after two cycles of degradation and repolymerization still reaches as high as 4.7±0.3 MPa.This work provides an approach for the development of environmentally stable and high-performance degradable thioctic acid-based adhesives.
基金supported by the National Research Foundation(NRF)of Korea,funded by the Korean Government(MSIT)(Grant No.RS-2023-00240043).
文摘As the most abundant aromatic bio-based polymer,lignin has great potential as a sustainable feedstock for building crosslinked thermoset polymers as bio-based adhesives.However,the potential of hardwood kraft lignin(HKL)is limited due to its poor crosslinking reactivity.Hence,for the first time,the present study reports the facile oxidation of HKL involving a redox reaction with silver-ammonia complexes([(AgNH3)2]+),primarily focusing on oxidation to produce reactive quinones and promote C-C linkages during reaction.This study aims to increases reactivity of oxidized HKL for effective crosslinking with monoethanolamine(MEA)for the development of bio-based wood adhesives.The characterization,including 13C-nuclear magnetic resonance(NMR)and Fourier transform infrared(FT-IR)spectroscopy,confirms the oxidation reaction,such as the formation of quinones(C=O)and subsequent crosslinking between the oxidized HKL molecules and MEA.Additionally,gel permeation chromatography(GPC)confirms the C-C and C-O linkages with increased molecular weight after oxidation,and is supported by differential scanning calorimetry(DSC)which shows the exothermic reaction due to the crosslinking of the oxidized HKL molecules via condensation to form C-C and C-O linkages.The crosslinked HKL/MEA-based adhesives underwent mild reaction and achieved a maximum dry shear strength of 0.77 MPa,which exceeds the standard requirement of 0.6 MPa.These findings demonstrate not only a one-pot oxidation for improving the reactivity of HKL using silver complexes,but also its facile crosslinking with MEA for sustainable bio-based wood adhesives.
基金funded by the“Departments of Excellence”program of the Italian Ministry for University and Research(MIUR,2018-2022 and MUR,2023-2027).
文摘The ability of queens and males of most ant species to disperse by flight has fundamentally contributed to the group’s evolutionary and ecological success and is a determining factor to take into account for biogeographic studies(Wagner and Liebherr 1992;Peeters and Ito 2001;Helms 2018).
基金funding for this research was provided by Netherlands Ministry of Defence
文摘The role of the adhesive layer in the ballistic performance of ceramic multi-layer armour system is complex and multi-faceted,often with trade-offs between single-and multi-hit performance.However,research focused on untangling the underlying impact of varying adhesive cohesive or adhesion properties is limited and sometimes appears to provide conflicting conclusions.Comparison between the available studies is also often difficult due to variations in armour systems or ballistic testing being conducted.This review scrutinises the available research,identifying six critical properties of an adhesive layer in determining ballistic performance:elastic modulus,fracture strain,acoustic impedance,tensile bond strength,shear bond strength,and thickness.The impact of each of these properties on ballistic performance is discussed in detail,with clear description of the underlying processes involved,allowing clear optimisation goals to be established depending on the ceramic armour specification.
基金financial support from the Guangdong Basic and Applied Basic Research Foundation(No.2023A1515012218)Macao Science and Technology Development Fund(Nos.FDCT 0009/2020/AMJ,0027/2023/RIB1)+1 种基金National Natural Science Foundation of China(No.32301104)Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.23ptpy165).
文摘Hydrogel-based flexible sensors are emerging as ideal candidates for wearable devices and soft robotics.However,most current hydrogels possess limited physicochemical properties,which hinder their practical application in long-term and complex scenarios.Herein,inspired by the unique structure of the barnacle,we design multifunctional poly(DMAPA-co-PHEA)hydrogels(CP hydrogels)by employing multiple physical crosslinks in the presence of Ag nanoparticles and NaCl additives.Owing to the synergistic effect of cation-πinteractions,hydrophobic interactions,and ionic bonds,the CP hydrogels exhibit high stretchability(strain up to 1430%),strong adhesion(22.8 kPa),satisfactory antibacterial activity,stable anti-icing ability(<20 kPa after 20 icing-deicing cycles),and high electrical conductivity(18.5 mS/cm).Additionally,the CP hydrogels show fast and sensitive responsiveness and cycling stability and can attach directly to human skin to accurately detect both human motions and tiny physiological signals as a flexible wearable sensor.Collectively,this work significantly contributes a straightforward and efficient design strategy for the development of multifunctional hydrogels,broadening their application scenarios.
文摘Background:Postoperative complications,particularly those involving lymphatic drainage,remain a significantchallenge for patients undergoing axillary lymphadenectomy(ALND)as part of breast cancer surgery.Thesecomplications can delay the initiation of adjuvant therapies,increase healthcare costs,and negatively affectpatients’quality of life.This study evaluated the use of a latex-based tissue adhesive(LTA)as an intraoperativestrategy to prevent seroma formation and prolonged lymphorrhea following axillary dissection.Methods:In this prospective study,65 female patients diagnosed with stage Ⅱb-Ⅲ breast cancer and clinicallyconfirmed axillary lymph node involvement were enrolled.Participants were divided into two groups.The studygroup(n=33)received an intraoperative application of LTA without drainage,while the control group(n=32)underwent standard ALND with placement of a silicone vacuum drain.Postoperative outcomes assessed includedlymphatic drainage volume,number of aspirations,duration of lymphorrhea,length of hospital stay,and incidence of complications.Results:Use of the LTA significantly reduced both the volume and duration of postoperative lymphorrhea.Bypostoperative day 10,the average wound exudate volume in the LTA group was 8.2±3.3 mL,compared to54.1±3.9 mL in the control group—an 84.8%reduction.The LTA group also experienced shorter hospital staysand fewer cases of postoperative seroma requiring intervention.Conclusion:LTA appears to be a safe,effective,and practical intraoperative technique for preventing lymphaticcomplications after ALND.Its use may reduce dependence on drainage systems,shorten hospitalization,andsupport earlier initiation of adjuvant therapies,ultimately improving surgical outcomes and patient recovery.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2022MB034)。
文摘The advancement of functional adhesives featuring recyclable and repairable properties is of great significance in interfacial science and engineering.Herein,a series of high-strength,recyclable fluorine-containing adhesives(ESOx-FPF)were designed and synthesized by crosslinking two prepolymers,FPF-B(derived from side-chain fluorinated diol,isocyanate,and aminoboric acid)and ESO-B(synthesized from biobased epoxy soybean oil and aminoboric acid),through dynamic boro-oxygen bonds.The resulting adhesive exhibited an optimal tensile strength of 42 MPa and the shear strength on steel plates reached as high as 3.89 MPa.More importantly,benefiting from the dynamic reversibility of the boron-oxygen bonds along with the hydrogen bonds interaction,ESOx-FPF can be welded with the assistance of solvents and recycled for multiple cycles.The outstanding healing efficiency and excellent reprocessability of these functional adhesives were confirmed by mechanical testing.Moreover,the as-prepared adhesives demonstrated universal and remarkable adhesion to various substrates,such as aromatic polyamide,aluminum plates and polycarbonate,meanwhile,they could be easily disassembled and recycled using ethanol without damaging the substrates surface.This study not only provides a simple strategy for the synthesis of eco-friendly adhesives with weldable and recyclable properties,but also sheds light on the development of other functional materials utilizing dynamic covalent chemistry.
基金supported by National Natural Science Foundation of China(No.52403042)China Postdoctoral Science Foundation(No.2023M742472)。
文摘Wound dressings with tissue adhesion,good mechanical,antioxidant and anti-inflammatory performance are urgently needed.In this work,we present a multifunctional selenium nanoparticles(SeNPs)/citric acid/gelatin/hydroxysuccinimide-grafted polyacrylic acid nanocomposite hydrogel adhesive(SCA) specifically designed for wound healing applications.The SCA was prepared via a one-pot processing,where SeNPs synthesized via chemical reduction were incorporated.These SeNPs not only endowed SCA with robust wet adhesion ability,excellent stretchability,and skin-matched elasticity modulus by serving as a physical crosslinker to modulate swelling equilibrium and molecular slippage,but also enhanced the biocompatibility and free radical scavenging capacity of SCA.Furthermore,in vivo evaluation of full-thickness cutaneous defects of rats revealed that SCA effectively reduced inflammation,promoted wound closure,and increased collagen deposition.All these results demonstrated that the developed SCA offers a promising therapeutic strategy for wound healing applications.
文摘The protection effectiveness of traditional Lightning Strike Protection(LSP)for composite rotor blade of helicopter can be diminished due to the explosion risk in overlapping attachment under lightning strike,so a new protection method based on Air Breakdown and insulating adhesive layer(AB-LSP method)was designed to avoid it.In this study,a numerical method was developed to simulate the electrical breakdown,and verified by experiment results.Based on this method,a Finite Element Model(FEM)was established to investigate the effect of two factors(breakdown strength and initial ablation temperature of adhesive layer)on the LSP effectiveness.The results show that the breakdown strength impacts more to the ablation damage in composite than that of high-temperature resistance.Then,another FEM was established to predict the ablation damage by lightning strike in the AB-LSP method protected composite rotor blade.The mechanisms and potential key parameters(magnitude of lightning current,discharge channel location,adhesive layer thickness,and air gap width)that could affect the protection effectiveness were analyzed.The introduction of air breakdown changes the current conduction path and reduces explosion risk.After rational design,this method can offer effective lightning protection for composite helicopter rotor blade and other composite structures.
文摘BACKGROUND Ultrasound classification can be used to determine the severity of adhesive intestinal obstruction and to guide the formulation of treatment plans.AIM To explore the value of ultrasound classification in disease judgment and treatment plan formulation for patients with adhesive intestinal obstruction.METHODS The medical records of 120 patients with adhesive intestinal obstruction presenting at Taihe Hospital Affiliated with Hubei Medical College were retrospectively analyzed from January 2022 to January 2024 according to the severity of ultrasound images,divided into simple(mild),complex(moderate),and critical(severe),analyzing the imaging characteristics of patients with different ultrasound classifications,and developing the corresponding treatment plan according to the ultrasound typing results,that is,conservative treatment and surgical treatment,contrast the ultrasound signs of patients in the conservative vs surgical treatment groups,and the value of ultrasound classification in the treatment of adhesive ileus.RESULTS Among the 120 patients,P>0.05,compared with the general data(sex,age,body quality index,time to onset,and history of onset),the proportion of bowel distension and abdominal effusion(P>0.05),and the proportion of adhesion mass and cross-cross in the conservative treatment group,P<0.05.CONCLUSION Ultrasound typing can aid in the clinical evaluation of the severity of adhesive intestinal obstruction and provide an imaging reference for clinicians to develop targeted treatment plans.
基金supported by Jiangsu Special Project for Frontier Leading Base Technology(Grant Nos.BK20192004)Fundamental Research Funds for Central Universities(Grant Nos.B240201190)+3 种基金Changzhou Social Development Science and Technology Support Project(Grant Nos.CE20225037)Changzhou Science and Technology Project(Grant Nos.CM20223014)Suzhou Key Industrial Technology Innovation Forward-Looking Application Research Project(Grant Nos.SYG202143)Changzhou Science and Technology Project(Grant Nos.CJ20241061).
文摘Soft actuators are inherently flexible and compliant,traits that enhance their adaptability to diverse environments and tasks.However,their low structural stiffness can lead to unpredictable and uncontrollable complex deformations when substantial force is required,compromising their load-bearing capacity.This work proposes a novel method that uses gecko setae-inspired adhesives as interlayer films to construct a layer jamming structure to adjust the stiffness of soft actuators.The mechanical behavior of a single tilted microcylinder was analyzed using the energy method to determine the adhesion force of the adhesives.The gecko-inspired adhesive was designed under the guidance of the adhesion force model.Testing under various loads and directions revealed that the tilted characteristic of microcylinders can enhance the adhesion force in its grasping direction.The adhesive demonstrated excellent adhesion performance compared to other typical adhesives.A tunable stiffness actuator using gecko setae-inspired adhesives(TSAGA),was developed with these adhesives serving as interlayer films.The stiffness model of TSAGA was derived by analyzing its axial compression force.The results of stiffness test indicate that the adhesives serve as interlayer films can adjust the stiffness in response to applied load.TSAGA was compared with other typical soft actuators in order to evaluate the stiffness performance,and the results indicate that TSAGA exhibits the highest stiffness and the widest tunable stiffness range.This demonstrates the superior performance of the setae-inspired adhesives as interlayer films in terms of stiffness adjustment.
文摘This paper comprehensively explores the technical principles and application practice of Sainaoning absorbable dural sealant medical adhesive in dural closure.It elaborates on the research and development background of Sainaoning,analyzes its composition,action mechanism,and product characteristics in detail,and presents the results of pre-clinical and clinical studies.The application of Sainaoning in different craniotomy surgeries is discussed,and its effectiveness and safety are evaluated.The paper also analyzes the challenges in its application and proposes corresponding countermeasures,aiming to provide a comprehensive understanding and reference for the clinical use and further development of Sainaoning.
