Duty-cycle modulation alternately blowing from two opposite-facing plasma actu- ators on the leeward surface near the apex of a cone with a 10° semi-apex angle is adopted to control mean lateral force and moment,...Duty-cycle modulation alternately blowing from two opposite-facing plasma actu- ators on the leeward surface near the apex of a cone with a 10° semi-apex angle is adopted to control mean lateral force and moment, and the flow control mechanisms are presented. Pressure distributions over the forebody of the cone are measured by steady pressure tappings. The experiments are performed in a 3.0×1.6 m open-circuit wind tunnel at a wind speed of 20 m/s, a 45° angle of attack and a Reynolds number of 2×10^5, based on the diameter of the base of the cone. Almost linearly proportional control of the lateral forces and moments over a slender conical forebody at a high angle of attack has been demonstrated by employing a pair of single dielectric barrier discharge plasma actuators near the apex of the cone, combined with a duty-cycle tech- nique. The pressure distribution measurements indicate that the hi-stable vortex pattern appears to be shifted in the opposite direction when the port or starboard actuator is activated, while the other is kept off during the test. It is shown that the reduced pulse-repetition frequency based on the local diameter at the plasma actuator equal to one yields the highest effectiveness among the cases considered.展开更多
Flexible actuators have significant potential in intelligent micromachines,artificial muscle,and soft robotics.However,achieving actuators with high actuation performance and feedback sensitivity remains challenging.I...Flexible actuators have significant potential in intelligent micromachines,artificial muscle,and soft robotics.However,achieving actuators with high actuation performance and feedback sensitivity remains challenging.Inspired by the dual“command-execution-feedback”of the mimic octopus,a fiber actuator with high stroke and visual-electronic dual feedback is designed by introducing an ionic liquid conductive network and a visual component of spiropyrane.By constructing a unique interchain slipping structure inside the liquid crystal elastomer(LCE),the nematic to isotropic transition temperature and maximum stroke temperature dropped to 24.29℃and 62.3℃,with decreases of 73.51%and 39.28%,respectively.Besides,the actuation stroke increases to 43.41%with an improvement of 77.11%,and the feedback sensitivity reaches to 69.17,along with a high work capacity of 189.12 kJ/m3.These provide a promising strategy for next-generation flexible actuators capable of high work capacity,large stroke,and real-time feedback.展开更多
Permanent-magnet(PM)machines are the important driving components of various mechanical equipment and industrial applications,such as robot joints,aerospace equipment,electric vehicles,actuators,wind generators and el...Permanent-magnet(PM)machines are the important driving components of various mechanical equipment and industrial applications,such as robot joints,aerospace equipment,electric vehicles,actuators,wind generators and electric traction systems.The PM machines are usually expected to have high torque/power density,low torque ripple,reduced rotor mass,a large constant power speed range or strong anti-magnetization capability to match different requirements of industrial applications.The structural topology of the electric machines,including stator/rotor arrangements and magnet patterns of rotor,is one major concern to improve their electromagnetic performance.However,systematic reviews of structural topology are seldom found in literature.Therefore,the objective of this paper is to summarize the stator/rotor arrangements and magnet patterns of the permanent-magnet brushless machines,in depth.Specifically,the stator/rotor arrangements of the PM machines including radial-flux,axialflux and emerging hybrid axial-radial flux configurations are presented,and pros and cons of these topologies are discussed regarding their electromagnetic performance.The magnet patterns including various surface-mounted and interior magnet patterns,such as parallel magnetization pole pattern,Halbach arrays,spoke-type designs and their variants are summarized,and the characteristics of those magnet patterns in terms of flux-focusing effect,magnetic self-shielding effect,torque ripple,reluctance torque,magnet utilization ratio,and anti-demagnetization capability are compared.This paper can provide guidance and suggestion for the structure selection and design of PM brushless machines for high-performance industrial applications.展开更多
This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hype...This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hypersonic vehicles.In order to increase the control amount,this online control legislation makes use of model predictive control(MPC)that is based on the concept of iterative learning control(ILC).By using offline data to decrease the linearized model’s faults,the strategy may effectively increase the robustness of the control system and guarantee that disturbances can be suppressed.An adaptive fault observer is created based on the suggested ILMPC approach in order to enhance overall fault tolerance by estimating and compensating for actuator disturbance and fault degree.During the derivation process,a linearized model of longitudinal dynamics is established.The suggested ILMPC approach is likely to be used in the design of hypersonic vehicle control systems since numerical simulations have demonstrated that it can decrease tracking error and speed up convergence when compared to the offline controller.展开更多
This paper endeavours to bridge the existing gap in muscular actuator design for ligament-skeletal-inspired robots,thereby fostering the evolution of these robotic systems.We introduce two novel compliant actuators,na...This paper endeavours to bridge the existing gap in muscular actuator design for ligament-skeletal-inspired robots,thereby fostering the evolution of these robotic systems.We introduce two novel compliant actuators,namely the Internal Torsion Spring Compliant Actuator(ICA)and the External Spring Compliant Actuator(ECA),and present a comparative analysis against the previously conceived Magnet Integrated Soft Actuator(MISA)through computational and experimental results.These actuators,employing a motor-tendon system,emulate biological muscle-like forms,enhancing artificial muscle technology.Then,applications of the proposed actuators in a robotic arm inspired by the human musculoskeletal system are presented.Experiments demonstrate satisfactory power in tasks like lifting dumbbells(peak power:36 W),playing table tennis(end-effector speed:3.2 m/s),and door opening,without compromising biomimetic aesthetics.Compared to other linear stiffness serial elastic actuators(SEAs),ECA and ICA exhibit high power-to-volume(361×10^(3)W/m^(3))and power-to-mass(111.6 W/kg)ratios respectively,endorsing the biomimetic design’s promise in robotic development.展开更多
As a kind of ionic artificial muscle material,Ionic Polymer-Metal Composites(IPMCs)have the advantages of a low drive current,light weight,and significant flexibility.IPMCs are widely used in the fields of biomedicine...As a kind of ionic artificial muscle material,Ionic Polymer-Metal Composites(IPMCs)have the advantages of a low drive current,light weight,and significant flexibility.IPMCs are widely used in the fields of biomedicine,soft robots,etc.However,the displacement and blocking force of the traditional sheet-type Nafion-IPMC need to be improved,and it has the limitation of unidirectional actuation.In this paper,a new type of short side chain Aquivion material is used as the polymer in the IPMC.The cylindrical IPMC is prepared by extrusion technology to improve its actuation performance and realize multi-degree-of-freedom motion.In comparison to the traditional Nafion-IPMC,the ion exchange capacity,specific capacitance,and conductivity of Aquivion-IPMC are improved by 28%,27%,and 32%,respectively,and the displacement and blocking force are improved by 57%and 25%,respectively.The cylindrical actuators can be deflected in eight directions.This indicates that Aquivion,as a polymer membrane for IPMC,holds significant application potential.By designing a cylindrical IPMC electrode distribution,the multi-degree-of-freedom deflection of IPMC can be realized.展开更多
Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from b...Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from both academia and industry.However,the extensive literature that exists on this topic does not address identifying the severity of actuator faults and focuses mainly on actuator fault detection and isolation.In addition,previous studies of actuator fault identification have not dealt with multiple concurrent faults in real time,especially when these are accompanied by sudden failures under dynamic conditions.This study develops component-level models for fault identification in four typical actuators used in high-bypass ratio turbofan engines under both dynamic and steady-state conditions and these are then integrated with the engine performance model developed by the authors.The research results reported here present a novel method of quantifying actuator faults using dynamic effect compensation.The maximum error for each actuator is less than0.06%and 0.07%,with average computational time of less than 0.0058 s and 0.0086 s for steady-state and transient cases,respectively.These results confirm that the proposed method can accurately and efficiently identify concurrent actuator fault for an engine operating under either transient or steady-state conditions,even in the case of a sudden malfunction.The research results emonstrate the potential benefit to emergency response capabilities by introducing this method of monitoring the health of aero engines.展开更多
Precision actuation is a foundational technology in high-end equipment domains,where stroke,velocity,and accuracy are critical for processing and/or detection quality,precision in spacecraft flight trajectories,and ac...Precision actuation is a foundational technology in high-end equipment domains,where stroke,velocity,and accuracy are critical for processing and/or detection quality,precision in spacecraft flight trajectories,and accuracy in weapon system strikes.Piezoelectric actuators(PEAs),known for their nanometer-level precision,flexible stroke,resistance to electromagnetic interference,and scalable structure,have been widely adopted across various fields.Therefore,this study focuses on extreme scenarios involving ultra-high precision(micrometer and beyond),minuscule scales,and highly complex operational conditions.It provides a comprehensive overview of the types,working principles,advantages,and disadvantages of PEAs,along with their potential applications in piezo-actuated smart mechatronic systems(PSMSs).To address the demands of extreme scenarios in high-end equipment fields,we have identified five representative application areas:positioning and alignment,biomedical device configuration,advanced manufacturing and processing,vibration mitigation,micro robot system.Each area is further divided into specific subcategories,where we explore the underlying relationships,mechanisms,representative schemes,and characteristics.Finally,we discuss the challenges and future development trends related to PEAs and PSMSs.This work aims to showcase the latest advancements in the application of PEAs and provide valuable guidance for researchers in this field.展开更多
The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the ...The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the compact integration of the OMP presents challenges inefficiently dissipating internal heat,leading to a performance degradation of the EHA due to ele-vated temperatures.Therefore,accurately modeling and predicting the internal thermal dynamicsof the OMP hold considerable significance for monitoring the operational condition of the EHA.In view of this,a modeling method considering cumulative thermal coupling was hereby proposed.Based on the proposed method,the thermal models of the motor and the pump were established,taking into account heat accumulation and transfer.Taking the leakage oil as the heat couplingpoint between the motor and the pump,the dynamic thermal coupling model of the OMP wasdeveloped,with the thermal characteristics of the oil considered.Additionally,the comparativeexperiments were conducted to illustrate the efficiency of the proposed model.The experimentalresults demonstrate that the proposed dynamic thermal coupling model accurately captured thethermal behavior of OMP,outperforming the static thermal parameter model.Overall,thisadvancement is crucial for effectively monitoring the health of EHA and ensuring flight safety.展开更多
The introduction of wireless capsule endoscopy has brought a revolutionary change in the diagnostic procedures for gastrointestinal disorders.Biopsy,an essential procedure for disease diagnosis,has been integrated int...The introduction of wireless capsule endoscopy has brought a revolutionary change in the diagnostic procedures for gastrointestinal disorders.Biopsy,an essential procedure for disease diagnosis,has been integrated into robotic capsule endoscopy to augment diagnostic capabilities.In this study,we propose a magnetically driven biopsy robot based on a Kresling origami.Considering the bistable properties of Krelsing origami and the elasticity of the creases,a foldable structure of the robot with constant force characteristics is designed.The folding motion of the structure is used to deploy the needle into the target tissue.The robot is capable of performing rolling motion under the control of an external magnetic drive system,and a fine needle biopsy technique is used to collect deep tissue samples.We also conduct in vitro rolling experiments and sampling experiments on apple tissues and pork tissues,which verify the performance of the robot.展开更多
Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptabilit...Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptability and safety.Various materials and actuation strategies have been developed for creating soft robots,among which,ferromagnetic soft materials that self-actuate in response to external magnetic fields have attracted worldwide attention due to their remote controllability and excellent compatibil-ity with biological tissues.This review presents comprehensive and systematic research advancements in the design,fabrication,and applications of ferromagnetic soft materials for miniature robots,providing in-sights into their potential use in biomedical fields and beyond.The programming strategies of ferromag-netic soft materials are summarized and classified,including mold-assisted programming,3D printing-assisted programming,microassembly-assisted programming,and magnetization reprogramming.Each approach possesses unique advantages in manipulating the magnetic responsiveness of ferromagnetic soft materials to achieve outstanding actuation and deformation performances.We then discuss the biomedi-cal applications of ferromagnetic soft material-based soft robots(e.g.,minimally invasive surgery,targeted delivery,and tissue engineering),highlighting their potentials in revolutionizing biomedical technologies.This review also points out the current challenges and provides insights into future research directions,which we hope can serve as a useful reference for the development of next-generation adaptive miniature robots.展开更多
Silicone rubber(SR)is a versatile material widely used across various advanced functional applications,such as soft actuators and robots,flexible electronics,and medical devices.However,most SR molding methods rely on...Silicone rubber(SR)is a versatile material widely used across various advanced functional applications,such as soft actuators and robots,flexible electronics,and medical devices.However,most SR molding methods rely on traditional thermal processing or direct ink writing three-dimensional(3D)printing.These methods are not conducive to manufacturing complex structures and present challenges such as time inefficiency,poor accuracy,and the necessity of multiple steps,significantly limiting SR applications.In this study,we developed an SR-based ink suitable for vat photopolymerization 3D printing using a multi-thiol monomer.This ink enables the one-step fabrication of complex architectures with high printing resolution at the micrometer scale,providing excellent mechanical strength and superior chemical stability.Specifically,the optimized 3D printing SR-20 exhibits a tensile stress of 1.96 MPa,an elongation at break of 487.9%,and an elastic modulus of 225.4 kPa.Additionally,the 3D-printed SR samples can withstand various solvents(acetone,toluene,and tetrahydrofuran)and endure temperatures ranging from-50℃ to 180℃,demonstrating superior stability.As a emonstration of the application,we successfully fabricated a series of SR-based soft pneumatic actuators and grippers in a single step with this technology,allowing for free assembly for the first time.This ultraviolet-curable SR,with high printing resolution and exceptional stability performance,has significant potential to enhance the capabilities of 3D printing for applications in soft actuators,robotics,flexible electronics,and medical devices.展开更多
To prepare a conductive polymer actuator with decent performance,a self-built experimental platform for the preparation of polypyrrole film is employed.One of the essential goals is to examine the mechanical character...To prepare a conductive polymer actuator with decent performance,a self-built experimental platform for the preparation of polypyrrole film is employed.One of the essential goals is to examine the mechanical characteristics of the actuator in the presence of various combinations of process parameters,combined with the orthogonal test method of"four factors and three levels".The bending and sensing characteristics of actuators of various sizes are methodically examined using a self-made bending polypyrrole actuator.The functional relationship between the bending displacement and the output voltage signal is established by studying the characteristics of the actuator sensor subjected to various degrees of bending.The experimental results reveal that the bending displacement of the actuator tip almost exhibits a linear variation as a function of length and width.When the voltage reaches 0.8 V,the bending speed of the actuator tends to be stable.Finally,the mechanical properties of the self-assembled polypyrrole actuator are verified by the design and fabrication of the microgripper.展开更多
Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical...Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical arms.The performance of the servo drive,which encompasses the response to the torque,efficiency,control bandwidth and the steady-state positioning accuracy,significantly influences the performance of the aviation actuation.Consequently,enhancing the control bandwidth and refining the positioning accuracy of aviation electro-mechanical actuation servo drives have emerged as a focal point of research.This paper investigates the multi-source disturbances present in aviation electro-mechanical actuation servo systems and summarizes recent research on high-performance servo control methods based on active disturbance rejection control(ADRC).We present a comprehensive overview of the research status pertaining to servo control architecture,strategies for suppressing disturbances in the current loop,and ADRC-based strategies for the position loop.We delineate the research challenges and difficulties encountered by aviation electro-mechanical actuation servo drive control technology.展开更多
Polymeric microwave actuators combining tissue-like softness with programmablemicrowave-responsive deformation hold great promise for mobile intelligentdevices and bionic soft robots. However, their application is cha...Polymeric microwave actuators combining tissue-like softness with programmablemicrowave-responsive deformation hold great promise for mobile intelligentdevices and bionic soft robots. However, their application is challenged by restricted electromagneticsensitivity and intricate sensing coupling. In this study, a sensitized polymericmicrowave actuator is fabricated by hybridizing a liquid crystal polymer with Ti3C2Tx(MXene). Compared to the initial counterpart, the hybrid polymer exhibits unique spacechargepolarization and interfacial polarization, resulting in significant improvements of230% in the dielectric loss factor and 830% in the apparent efficiency of electromagneticenergy harvest. The sensitized microwave actuation demonstrates as the shortenedresponse time of nearly 10 s, which is merely 13% of that for the initial shape memory polymer. Moreover, the ultra-low content of MXene (upto 0.15 wt%) benefits for maintaining the actuation potential of the hybrid polymer. An innovative self-powered sensing prototype that combinesdriving and piezoelectric polymers is developed, which generates real-time electric potential feedback (open-circuit potential of ~ 3 mV) duringactuation. The polarization-dominant energy conversion mechanism observed in the MXene-polymer hybrid structure furnishes a new approachfor developing efficient electromagnetic dissipative structures and shows potential for advancing polymeric electromagnetic intelligent devices.展开更多
Dear Editor,In this letter,a constrained networked predictive control strategy is proposed for the optimal control problem of complex nonlinear highorder fully actuated(HOFA)systems with noises.The method can effectiv...Dear Editor,In this letter,a constrained networked predictive control strategy is proposed for the optimal control problem of complex nonlinear highorder fully actuated(HOFA)systems with noises.The method can effectively deal with nonlinearities,constraints,and noises in the system,optimize the performance metric,and present an upper bound on the stable output of the system.展开更多
Piezoelectric active vibration control holds paramount importance in space structures.An embedded piezoelectric actuator with a sandwich configuration is proposed,which enhances control accuracy by integrating various...Piezoelectric active vibration control holds paramount importance in space structures.An embedded piezoelectric actuator with a sandwich configuration is proposed,which enhances control accuracy by integrating various components.Firstly,the electromechanical coupling characteristics of the actuator are revealed,and the model is established.Secondly,the equivalent model of a cylindrical cantilever beam is investigated as the object,and the feasibility of the vibration control of the actuator is verified by simulation.Finally,the prototype comprised of two actuators,which respectively use the proposed embedded actuators for producing the vibration and suppressing the vibration,is developed,and the measurement system is constructed.Experimental results demonstrate the excellent control efficiency in two orthogonal directions,achieving a minimum vibration amplitude control of 0.00102 mm and a maximum vibration control of-42.74 d B.The integrated structure offers fast response,lightness,adaptability,and high control efficiency,which is conducive to enhancing the vibration control.展开更多
This paper presents an untethered pneumatic soft robot which can crawl both in horizontal and vertical pipes with different sizes and cross sections.This robot uses modular origami inspired soft-rigid hybrid actuator ...This paper presents an untethered pneumatic soft robot which can crawl both in horizontal and vertical pipes with different sizes and cross sections.This robot uses modular origami inspired soft-rigid hybrid actuator to produce telescoping and anchoring movements powered by vacuum pressure.The introduction of grooves to valley crease significantly lowers the full contraction vacuum pressure and improves the response,allowing the system can be driven by an onboard micro vacuum pump,enabling the possibility of miniaturization,integration,and untethered operation of the robot.A series of crawling experiments in pipes with different sizes and cross sections constructed by acrylic are conducted to validate the crawling performance of the robot.Within square cross-section pipes,the robot can achieve a velocity of 9.4 mm/s in horizontal crawling and 7.7 mm/s in vertical upward crawling.For horizontal crawling in circular pipes,it can reach a velocity of 8.0 mm/s.When fully charged,the robot can crawl for 40 min with a mileage of 16.649 m,which is sufficient for most drainage and industrial pipelines detection tasks.The robot demonstrates excellent endurance and speed performance that exceed most existing untethered soft pipe crawling robots.展开更多
Tendon-driven robots have distinct advantages in high-dynamic performance motion and high-degree-of-freedom manipulation.However,these robots face challenges related to control complexity,intricate tendon drive paths,...Tendon-driven robots have distinct advantages in high-dynamic performance motion and high-degree-of-freedom manipulation.However,these robots face challenges related to control complexity,intricate tendon drive paths,and tendon slackness.In this study,the authors present a novel modular tendon-driven actuator design that integrates a series elastic element.The actuator incorporates a unique magnetic position sensing technology that enables observation of the length and tension of the tendon and features an exceptionally compact design.The modular architecture of the tendon-driven actuator addresses the complexity of tendon drive paths,while the tension observation functionality mitigates slackness issues.The design and modeling of the actuator are described in this paper,and a series of tests are conducted to validate the simulation model and to test the performance of the proposed actuator.The model can be used for training robot control neural networks based on simulation,thereby overcoming the challenges associated with controlling tendon-driven robots.展开更多
Piezoelectric actuators are widely utilized in positioning systems to realize nano-scale resolution. However, the backward motion always generates for some piezoelectric actuators, which reduces the working efficiency...Piezoelectric actuators are widely utilized in positioning systems to realize nano-scale resolution. However, the backward motion always generates for some piezoelectric actuators, which reduces the working efficiency. Bionic motions have already been employed in the field of piezoelectric actuators to realize better performance. By imitating the movement form of seals, seal type piezoelectric actuator is capable to realize large operating strokes easily. Nevertheless, the conventional seal type piezoelectric actuator has a complicated structure and control system, which limits further applications. Hence, an improved bionic piezoelectric actuator is proposed to realize a long motion stroke and eliminate backward movement with a simplified structure and control method in this study. The composition and motion principle of the designed actuator are discussed, and the performance is investigated with simulations and experiments. Results confirm that the presented actuator effectively realizes the linear movement that has a large working stroke stably without backward motion. The smallest stepping displacement ΔL is 0.2 μm under 1 Hz and 50 V. The largest motion speed is 900 μm/s with 900 Hz and 120 V. The largest vertical and horizontal load are 250 g and 12 g, respectively. This work shows that the improved bionic piezoelectric actuator is feasible for eliminating backward motion and has a great working ability.展开更多
基金supported by the Specialized Research Fund for Doctoral Program of Higher Education,SPFDP-200806990003the Foundation for Fundamental Research of the Northwestern Polytechnical University,NPU-FFR-W018102
文摘Duty-cycle modulation alternately blowing from two opposite-facing plasma actu- ators on the leeward surface near the apex of a cone with a 10° semi-apex angle is adopted to control mean lateral force and moment, and the flow control mechanisms are presented. Pressure distributions over the forebody of the cone are measured by steady pressure tappings. The experiments are performed in a 3.0×1.6 m open-circuit wind tunnel at a wind speed of 20 m/s, a 45° angle of attack and a Reynolds number of 2×10^5, based on the diameter of the base of the cone. Almost linearly proportional control of the lateral forces and moments over a slender conical forebody at a high angle of attack has been demonstrated by employing a pair of single dielectric barrier discharge plasma actuators near the apex of the cone, combined with a duty-cycle tech- nique. The pressure distribution measurements indicate that the hi-stable vortex pattern appears to be shifted in the opposite direction when the port or starboard actuator is activated, while the other is kept off during the test. It is shown that the reduced pulse-repetition frequency based on the local diameter at the plasma actuator equal to one yields the highest effectiveness among the cases considered.
基金support from the National Key Research and Development Program of China(2022YFB3805803)National Natural Science Foundation of China(52103063)+2 种基金Hubei Natural Science Foundation Project(2023AFB728)Shandong Provincial Science and Technology Department Small and Medium Enterprises Promotion Project(2024TSGC0657)Open Project of the Key Laboratory of Textile Fibers and Products,Ministry of Education(Fzxw2024012).
文摘Flexible actuators have significant potential in intelligent micromachines,artificial muscle,and soft robotics.However,achieving actuators with high actuation performance and feedback sensitivity remains challenging.Inspired by the dual“command-execution-feedback”of the mimic octopus,a fiber actuator with high stroke and visual-electronic dual feedback is designed by introducing an ionic liquid conductive network and a visual component of spiropyrane.By constructing a unique interchain slipping structure inside the liquid crystal elastomer(LCE),the nematic to isotropic transition temperature and maximum stroke temperature dropped to 24.29℃and 62.3℃,with decreases of 73.51%and 39.28%,respectively.Besides,the actuation stroke increases to 43.41%with an improvement of 77.11%,and the feedback sensitivity reaches to 69.17,along with a high work capacity of 189.12 kJ/m3.These provide a promising strategy for next-generation flexible actuators capable of high work capacity,large stroke,and real-time feedback.
基金Supported by National Natural Science Foundation of China(NSFC)(Grant No.52130505)Zhejiang Provincial Natural Science Foundation of China(Grant No.LD24E050005)+1 种基金Ningbo Key Scientific and Technological Project of China(Grant No.2022Z040)Academic Excellence Foundation of BUAA for PhD Students.
文摘Permanent-magnet(PM)machines are the important driving components of various mechanical equipment and industrial applications,such as robot joints,aerospace equipment,electric vehicles,actuators,wind generators and electric traction systems.The PM machines are usually expected to have high torque/power density,low torque ripple,reduced rotor mass,a large constant power speed range or strong anti-magnetization capability to match different requirements of industrial applications.The structural topology of the electric machines,including stator/rotor arrangements and magnet patterns of rotor,is one major concern to improve their electromagnetic performance.However,systematic reviews of structural topology are seldom found in literature.Therefore,the objective of this paper is to summarize the stator/rotor arrangements and magnet patterns of the permanent-magnet brushless machines,in depth.Specifically,the stator/rotor arrangements of the PM machines including radial-flux,axialflux and emerging hybrid axial-radial flux configurations are presented,and pros and cons of these topologies are discussed regarding their electromagnetic performance.The magnet patterns including various surface-mounted and interior magnet patterns,such as parallel magnetization pole pattern,Halbach arrays,spoke-type designs and their variants are summarized,and the characteristics of those magnet patterns in terms of flux-focusing effect,magnetic self-shielding effect,torque ripple,reluctance torque,magnet utilization ratio,and anti-demagnetization capability are compared.This paper can provide guidance and suggestion for the structure selection and design of PM brushless machines for high-performance industrial applications.
基金supported by the National Natural Science Foundation of China(12072090).
文摘This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hypersonic vehicles.In order to increase the control amount,this online control legislation makes use of model predictive control(MPC)that is based on the concept of iterative learning control(ILC).By using offline data to decrease the linearized model’s faults,the strategy may effectively increase the robustness of the control system and guarantee that disturbances can be suppressed.An adaptive fault observer is created based on the suggested ILMPC approach in order to enhance overall fault tolerance by estimating and compensating for actuator disturbance and fault degree.During the derivation process,a linearized model of longitudinal dynamics is established.The suggested ILMPC approach is likely to be used in the design of hypersonic vehicle control systems since numerical simulations have demonstrated that it can decrease tracking error and speed up convergence when compared to the offline controller.
基金research project funded by the National Natural Science Foundation of China(NSFC)under Grant 91948302 and Grant 52021003Research England fund at NERIC.
文摘This paper endeavours to bridge the existing gap in muscular actuator design for ligament-skeletal-inspired robots,thereby fostering the evolution of these robotic systems.We introduce two novel compliant actuators,namely the Internal Torsion Spring Compliant Actuator(ICA)and the External Spring Compliant Actuator(ECA),and present a comparative analysis against the previously conceived Magnet Integrated Soft Actuator(MISA)through computational and experimental results.These actuators,employing a motor-tendon system,emulate biological muscle-like forms,enhancing artificial muscle technology.Then,applications of the proposed actuators in a robotic arm inspired by the human musculoskeletal system are presented.Experiments demonstrate satisfactory power in tasks like lifting dumbbells(peak power:36 W),playing table tennis(end-effector speed:3.2 m/s),and door opening,without compromising biomimetic aesthetics.Compared to other linear stiffness serial elastic actuators(SEAs),ECA and ICA exhibit high power-to-volume(361×10^(3)W/m^(3))and power-to-mass(111.6 W/kg)ratios respectively,endorsing the biomimetic design’s promise in robotic development.
基金financial support from the National Natural Science Foundation of China(Grant No.U1637101)The Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(1005-ZAG23011).
文摘As a kind of ionic artificial muscle material,Ionic Polymer-Metal Composites(IPMCs)have the advantages of a low drive current,light weight,and significant flexibility.IPMCs are widely used in the fields of biomedicine,soft robots,etc.However,the displacement and blocking force of the traditional sheet-type Nafion-IPMC need to be improved,and it has the limitation of unidirectional actuation.In this paper,a new type of short side chain Aquivion material is used as the polymer in the IPMC.The cylindrical IPMC is prepared by extrusion technology to improve its actuation performance and realize multi-degree-of-freedom motion.In comparison to the traditional Nafion-IPMC,the ion exchange capacity,specific capacitance,and conductivity of Aquivion-IPMC are improved by 28%,27%,and 32%,respectively,and the displacement and blocking force are improved by 57%and 25%,respectively.The cylindrical actuators can be deflected in eight directions.This indicates that Aquivion,as a polymer membrane for IPMC,holds significant application potential.By designing a cylindrical IPMC electrode distribution,the multi-degree-of-freedom deflection of IPMC can be realized.
基金support by the National Natural Science Foundation of China(Grant No.52402520)。
文摘Actuator faults can be critical in turbofan engines as they can lead to stall,surge,loss of thrust and failure of speed control.Thus,fault diagnosis of gas turbine actuators has attracted considerable attention,from both academia and industry.However,the extensive literature that exists on this topic does not address identifying the severity of actuator faults and focuses mainly on actuator fault detection and isolation.In addition,previous studies of actuator fault identification have not dealt with multiple concurrent faults in real time,especially when these are accompanied by sudden failures under dynamic conditions.This study develops component-level models for fault identification in four typical actuators used in high-bypass ratio turbofan engines under both dynamic and steady-state conditions and these are then integrated with the engine performance model developed by the authors.The research results reported here present a novel method of quantifying actuator faults using dynamic effect compensation.The maximum error for each actuator is less than0.06%and 0.07%,with average computational time of less than 0.0058 s and 0.0086 s for steady-state and transient cases,respectively.These results confirm that the proposed method can accurately and efficiently identify concurrent actuator fault for an engine operating under either transient or steady-state conditions,even in the case of a sudden malfunction.The research results emonstrate the potential benefit to emergency response capabilities by introducing this method of monitoring the health of aero engines.
基金financially supported by the National Key R&D Program of China(Grant No.2022YFC2204203)the National Natural Science Foundation of China(Grant No.52305107)。
文摘Precision actuation is a foundational technology in high-end equipment domains,where stroke,velocity,and accuracy are critical for processing and/or detection quality,precision in spacecraft flight trajectories,and accuracy in weapon system strikes.Piezoelectric actuators(PEAs),known for their nanometer-level precision,flexible stroke,resistance to electromagnetic interference,and scalable structure,have been widely adopted across various fields.Therefore,this study focuses on extreme scenarios involving ultra-high precision(micrometer and beyond),minuscule scales,and highly complex operational conditions.It provides a comprehensive overview of the types,working principles,advantages,and disadvantages of PEAs,along with their potential applications in piezo-actuated smart mechatronic systems(PSMSs).To address the demands of extreme scenarios in high-end equipment fields,we have identified five representative application areas:positioning and alignment,biomedical device configuration,advanced manufacturing and processing,vibration mitigation,micro robot system.Each area is further divided into specific subcategories,where we explore the underlying relationships,mechanisms,representative schemes,and characteristics.Finally,we discuss the challenges and future development trends related to PEAs and PSMSs.This work aims to showcase the latest advancements in the application of PEAs and provide valuable guidance for researchers in this field.
基金supported by the National Key R&D Program of China(No.2021YFB2011300)the National Natural Science Foundation of China(Nos.52275044,U2233212)。
文摘The Electro–Hydrostatic Actuator(EHA)is applied to drive the control surface in flightcontrol system of more electric aircraft.In EHA,the Oil-Immersed Motor Pump(OMP)serves asthe core as a power assembly.However,the compact integration of the OMP presents challenges inefficiently dissipating internal heat,leading to a performance degradation of the EHA due to ele-vated temperatures.Therefore,accurately modeling and predicting the internal thermal dynamicsof the OMP hold considerable significance for monitoring the operational condition of the EHA.In view of this,a modeling method considering cumulative thermal coupling was hereby proposed.Based on the proposed method,the thermal models of the motor and the pump were established,taking into account heat accumulation and transfer.Taking the leakage oil as the heat couplingpoint between the motor and the pump,the dynamic thermal coupling model of the OMP wasdeveloped,with the thermal characteristics of the oil considered.Additionally,the comparativeexperiments were conducted to illustrate the efficiency of the proposed model.The experimentalresults demonstrate that the proposed dynamic thermal coupling model accurately captured thethermal behavior of OMP,outperforming the static thermal parameter model.Overall,thisadvancement is crucial for effectively monitoring the health of EHA and ensuring flight safety.
基金supported by the National Natural Science Foundation of China(Grant Nos.51805047 and 52175003)the Outstanding Youth Program of Hunan Education Department(Grant No.23B0335)the Natural Science Foundation of Hunan Province(Grant Nos.2023JJ30021 and 2023JJ50077).
文摘The introduction of wireless capsule endoscopy has brought a revolutionary change in the diagnostic procedures for gastrointestinal disorders.Biopsy,an essential procedure for disease diagnosis,has been integrated into robotic capsule endoscopy to augment diagnostic capabilities.In this study,we propose a magnetically driven biopsy robot based on a Kresling origami.Considering the bistable properties of Krelsing origami and the elasticity of the creases,a foldable structure of the robot with constant force characteristics is designed.The folding motion of the structure is used to deploy the needle into the target tissue.The robot is capable of performing rolling motion under the control of an external magnetic drive system,and a fine needle biopsy technique is used to collect deep tissue samples.We also conduct in vitro rolling experiments and sampling experiments on apple tissues and pork tissues,which verify the performance of the robot.
基金the National Key R&D Program of China(No.2023YFE0208700)National Natural Sci-ence Foundation of China(No.92163109 and 52072095)+7 种基金Shenzhen Science and Technology Program(No.RCJC20231211090000001,GXWD20231129101105001)the National Natural Science Foundation of China(No.52205590)the Natural Science Foundation of Jiangsu Province(No.BK20220834)the Start-up Research Fund of Southeast University(No.RF1028623098)the State Key Laboratory of Robotics and Systems(HIT)(No.SKLRS-2024-KF-11)National Natural Science Foundation of China(No.52202348)Guangdong Basic and Applied Basic Research Foundation(No.2023A1515011491)Shenzhen Science and Technology Program(Nos.GXWD20220818224716001,KJZD20231023100302006).
文摘Due to the small size,active mobility,and intrinsic softness,miniature soft robots hold promising po-tentials in reaching the deep region inside living bodies otherwise inaccessible with compelling agility,adaptability and safety.Various materials and actuation strategies have been developed for creating soft robots,among which,ferromagnetic soft materials that self-actuate in response to external magnetic fields have attracted worldwide attention due to their remote controllability and excellent compatibil-ity with biological tissues.This review presents comprehensive and systematic research advancements in the design,fabrication,and applications of ferromagnetic soft materials for miniature robots,providing in-sights into their potential use in biomedical fields and beyond.The programming strategies of ferromag-netic soft materials are summarized and classified,including mold-assisted programming,3D printing-assisted programming,microassembly-assisted programming,and magnetization reprogramming.Each approach possesses unique advantages in manipulating the magnetic responsiveness of ferromagnetic soft materials to achieve outstanding actuation and deformation performances.We then discuss the biomedi-cal applications of ferromagnetic soft material-based soft robots(e.g.,minimally invasive surgery,targeted delivery,and tissue engineering),highlighting their potentials in revolutionizing biomedical technologies.This review also points out the current challenges and provides insights into future research directions,which we hope can serve as a useful reference for the development of next-generation adaptive miniature robots.
基金supported by the Strategic Priority Program of the Chinese Academy of Sciences(XDB0470303)the National Key R&D Program of China(2022YFB4600102and 2023YFE0209900)+4 种基金the National Natural Science Foundation of China(52175201 and 51935012)the science and technology projects of Gansu province(22JR5RA093,24JRRA044,24YFFA014 and 24ZDGA014)the Innovation and Entrepreneurship Team Project of YEDA(2021TD007)the special supporting project for provincial leading talents of Yantaithe Taishan Scholars Program。
文摘Silicone rubber(SR)is a versatile material widely used across various advanced functional applications,such as soft actuators and robots,flexible electronics,and medical devices.However,most SR molding methods rely on traditional thermal processing or direct ink writing three-dimensional(3D)printing.These methods are not conducive to manufacturing complex structures and present challenges such as time inefficiency,poor accuracy,and the necessity of multiple steps,significantly limiting SR applications.In this study,we developed an SR-based ink suitable for vat photopolymerization 3D printing using a multi-thiol monomer.This ink enables the one-step fabrication of complex architectures with high printing resolution at the micrometer scale,providing excellent mechanical strength and superior chemical stability.Specifically,the optimized 3D printing SR-20 exhibits a tensile stress of 1.96 MPa,an elongation at break of 487.9%,and an elastic modulus of 225.4 kPa.Additionally,the 3D-printed SR samples can withstand various solvents(acetone,toluene,and tetrahydrofuran)and endure temperatures ranging from-50℃ to 180℃,demonstrating superior stability.As a emonstration of the application,we successfully fabricated a series of SR-based soft pneumatic actuators and grippers in a single step with this technology,allowing for free assembly for the first time.This ultraviolet-curable SR,with high printing resolution and exceptional stability performance,has significant potential to enhance the capabilities of 3D printing for applications in soft actuators,robotics,flexible electronics,and medical devices.
基金Funded by the National Natural Science Foundation of Hunan Province,Chinal(No.2021JJ60012)。
文摘To prepare a conductive polymer actuator with decent performance,a self-built experimental platform for the preparation of polypyrrole film is employed.One of the essential goals is to examine the mechanical characteristics of the actuator in the presence of various combinations of process parameters,combined with the orthogonal test method of"four factors and three levels".The bending and sensing characteristics of actuators of various sizes are methodically examined using a self-made bending polypyrrole actuator.The functional relationship between the bending displacement and the output voltage signal is established by studying the characteristics of the actuator sensor subjected to various degrees of bending.The experimental results reveal that the bending displacement of the actuator tip almost exhibits a linear variation as a function of length and width.When the voltage reaches 0.8 V,the bending speed of the actuator tends to be stable.Finally,the mechanical properties of the self-assembled polypyrrole actuator are verified by the design and fabrication of the microgripper.
基金supported by the National Natural Science Foundation of China(Nos.52177059 and 52407064).
文摘Permanent magnet synchronous motor based electro-mechanical actuation servo drives have widespread applications in the aviation field,such as unmanned aerial vehicle electric servos,electric cabin doors,and mechanical arms.The performance of the servo drive,which encompasses the response to the torque,efficiency,control bandwidth and the steady-state positioning accuracy,significantly influences the performance of the aviation actuation.Consequently,enhancing the control bandwidth and refining the positioning accuracy of aviation electro-mechanical actuation servo drives have emerged as a focal point of research.This paper investigates the multi-source disturbances present in aviation electro-mechanical actuation servo systems and summarizes recent research on high-performance servo control methods based on active disturbance rejection control(ADRC).We present a comprehensive overview of the research status pertaining to servo control architecture,strategies for suppressing disturbances in the current loop,and ADRC-based strategies for the position loop.We delineate the research challenges and difficulties encountered by aviation electro-mechanical actuation servo drive control technology.
基金supported by the National Natural Science Foundation of China(No.52373280,52177014,51977009,52273257)。
文摘Polymeric microwave actuators combining tissue-like softness with programmablemicrowave-responsive deformation hold great promise for mobile intelligentdevices and bionic soft robots. However, their application is challenged by restricted electromagneticsensitivity and intricate sensing coupling. In this study, a sensitized polymericmicrowave actuator is fabricated by hybridizing a liquid crystal polymer with Ti3C2Tx(MXene). Compared to the initial counterpart, the hybrid polymer exhibits unique spacechargepolarization and interfacial polarization, resulting in significant improvements of230% in the dielectric loss factor and 830% in the apparent efficiency of electromagneticenergy harvest. The sensitized microwave actuation demonstrates as the shortenedresponse time of nearly 10 s, which is merely 13% of that for the initial shape memory polymer. Moreover, the ultra-low content of MXene (upto 0.15 wt%) benefits for maintaining the actuation potential of the hybrid polymer. An innovative self-powered sensing prototype that combinesdriving and piezoelectric polymers is developed, which generates real-time electric potential feedback (open-circuit potential of ~ 3 mV) duringactuation. The polarization-dominant energy conversion mechanism observed in the MXene-polymer hybrid structure furnishes a new approachfor developing efficient electromagnetic dissipative structures and shows potential for advancing polymeric electromagnetic intelligent devices.
基金supported in part by the National Natural Science Foundation of China(62173255,62188101)Shenzhen Key Laboratory of Control Theory and Intelligent Systems(ZDSYS20220330161800001)
文摘Dear Editor,In this letter,a constrained networked predictive control strategy is proposed for the optimal control problem of complex nonlinear highorder fully actuated(HOFA)systems with noises.The method can effectively deal with nonlinearities,constraints,and noises in the system,optimize the performance metric,and present an upper bound on the stable output of the system.
基金supported by the National Natural Science Foundation of China(Nos.52275022,52175015 and U2037603)the Natural Science Foundation of Jiangsu Province,China(Nos.BK20222011 and BK20230093)the State Key Laboratory of Mechanics and Control for Aerospace Structures,China(No.MCAS-S-0223G01)。
文摘Piezoelectric active vibration control holds paramount importance in space structures.An embedded piezoelectric actuator with a sandwich configuration is proposed,which enhances control accuracy by integrating various components.Firstly,the electromechanical coupling characteristics of the actuator are revealed,and the model is established.Secondly,the equivalent model of a cylindrical cantilever beam is investigated as the object,and the feasibility of the vibration control of the actuator is verified by simulation.Finally,the prototype comprised of two actuators,which respectively use the proposed embedded actuators for producing the vibration and suppressing the vibration,is developed,and the measurement system is constructed.Experimental results demonstrate the excellent control efficiency in two orthogonal directions,achieving a minimum vibration amplitude control of 0.00102 mm and a maximum vibration control of-42.74 d B.The integrated structure offers fast response,lightness,adaptability,and high control efficiency,which is conducive to enhancing the vibration control.
基金supported by National Natural Science Foundation of China under Grant no.52475067.
文摘This paper presents an untethered pneumatic soft robot which can crawl both in horizontal and vertical pipes with different sizes and cross sections.This robot uses modular origami inspired soft-rigid hybrid actuator to produce telescoping and anchoring movements powered by vacuum pressure.The introduction of grooves to valley crease significantly lowers the full contraction vacuum pressure and improves the response,allowing the system can be driven by an onboard micro vacuum pump,enabling the possibility of miniaturization,integration,and untethered operation of the robot.A series of crawling experiments in pipes with different sizes and cross sections constructed by acrylic are conducted to validate the crawling performance of the robot.Within square cross-section pipes,the robot can achieve a velocity of 9.4 mm/s in horizontal crawling and 7.7 mm/s in vertical upward crawling.For horizontal crawling in circular pipes,it can reach a velocity of 8.0 mm/s.When fully charged,the robot can crawl for 40 min with a mileage of 16.649 m,which is sufficient for most drainage and industrial pipelines detection tasks.The robot demonstrates excellent endurance and speed performance that exceed most existing untethered soft pipe crawling robots.
基金supported in part by the National Key R&D Program of China under Grant 2024YFB4707900the National Natural Science Foundation of China under Grant 91948302 and Grant 52021003.
文摘Tendon-driven robots have distinct advantages in high-dynamic performance motion and high-degree-of-freedom manipulation.However,these robots face challenges related to control complexity,intricate tendon drive paths,and tendon slackness.In this study,the authors present a novel modular tendon-driven actuator design that integrates a series elastic element.The actuator incorporates a unique magnetic position sensing technology that enables observation of the length and tension of the tendon and features an exceptionally compact design.The modular architecture of the tendon-driven actuator addresses the complexity of tendon drive paths,while the tension observation functionality mitigates slackness issues.The design and modeling of the actuator are described in this paper,and a series of tests are conducted to validate the simulation model and to test the performance of the proposed actuator.The model can be used for training robot control neural networks based on simulation,thereby overcoming the challenges associated with controlling tendon-driven robots.
基金supported by The Key Science and Technology Plan Project of Jinhua City,China:2023-3-084,2023-2-011Zhejiang Provincial"Revealing the list and taking command"Project of China KYH06Y22349Open Fund Project of Key Laboratory of CNC Equipment reliability,Ministry of Education JLU-cncr-202407.
文摘Piezoelectric actuators are widely utilized in positioning systems to realize nano-scale resolution. However, the backward motion always generates for some piezoelectric actuators, which reduces the working efficiency. Bionic motions have already been employed in the field of piezoelectric actuators to realize better performance. By imitating the movement form of seals, seal type piezoelectric actuator is capable to realize large operating strokes easily. Nevertheless, the conventional seal type piezoelectric actuator has a complicated structure and control system, which limits further applications. Hence, an improved bionic piezoelectric actuator is proposed to realize a long motion stroke and eliminate backward movement with a simplified structure and control method in this study. The composition and motion principle of the designed actuator are discussed, and the performance is investigated with simulations and experiments. Results confirm that the presented actuator effectively realizes the linear movement that has a large working stroke stably without backward motion. The smallest stepping displacement ΔL is 0.2 μm under 1 Hz and 50 V. The largest motion speed is 900 μm/s with 900 Hz and 120 V. The largest vertical and horizontal load are 250 g and 12 g, respectively. This work shows that the improved bionic piezoelectric actuator is feasible for eliminating backward motion and has a great working ability.
