High electrochemical performance supercapacitors require activated carbon with high specific surface area,suitable pore size distribution and surface properties,and high electrical conductivity as electrode materials,...High electrochemical performance supercapacitors require activated carbon with high specific surface area,suitable pore size distribution and surface properties,and high electrical conductivity as electrode materials,whereas there exists a trade-off relationship between specific surface area and electrical conductivity,which is not well met by a single type of carbon source.To solve this problem,the coal and sargassum are adopted to obtain the coupling product via co-thermal dissolution,followed by carbonization and KOH activation.The effects of mixing mass ratio and activation temperature on the prepared activated carbon(AC)are investigated using single factor experimental method.The experimental results show that AC_(1/3-800)has abundant micropore and mesopore content,good pore structure connectivity,high electrical conductivity and good wettability,and superior electrochemical properties compared with other activated carbons prepared in this experiment.Its total specific surface area is up to 2098.5 m^(2)·g^(-1),the pore volume is up to 1.33 cm^(3)·g^(-1),the content of mespores with diameter of 6-8 nm is significantly increased,and the pore size distribution is wide and uniform.When the current density increases from 0.1 to 10 A·g^(-1),the gravimetric capacitance decreases from 219 to 186 F·g^(-1)with a capacitance retention of 84.9%,the equivalent series resistance is very small,and the rate performance and reversibility of charging and discharging have also been excellent.展开更多
Herein,the association between the dynamic adsorption capacity of toluene and several important characteristic values on activated carbon(AC)samples was investigated by multidimensional linear regression.Among the cha...Herein,the association between the dynamic adsorption capacity of toluene and several important characteristic values on activated carbon(AC)samples was investigated by multidimensional linear regression.Among the characteristic values,the carbon tetrachloride(CTC)adsorption value has demonstrated relatively stronger correlation with the toluene adsorption capacity on AC sampleswith diverse sources and forms,particularly in exposure to high-concentration toluene.Notably,the relevance of the toluene adsorption capacity to the CTC value could also be extended to a series of other porous adsorbents,which proved the wide applicability of CTC value in characterizing the adsorption behaviors.Based on these results,a mathematical and visual model was then established to predict the toluene adsorption saturation under different conditions(inlet concentration,adsorption time,initial CTC value,etc.)on diverse AC samples,of which the accuracy has later been verified by experimental data.As such,a fast and accurate estimation of the adsorption behaviors over AC samples,and possibly other porous adsorbents,was realized.展开更多
Designing xerogels at the molecular level to overcome volume shrinkage is a promising strategy for carbon xerogels with desirable structure and performance.Here,we design a xerogel with non-shrinkage by introducing Zn...Designing xerogels at the molecular level to overcome volume shrinkage is a promising strategy for carbon xerogels with desirable structure and performance.Here,we design a xerogel with non-shrinkage by introducing ZnCl_(2) into resorcinol-melamine-formaldehyde polymerization.The gel network consisting of micrometer pores and large particles(0.26-1.35μm)is constructed by the coordination of Zn^(2+) with oxygen/nitrogen-containing groups,which is attributed to the structural support of the rigid triazine skeleton with large steric hindrance.Therefore,the reinforced gel network possesses enough strength to withstand capillary forces during atmospheric drying,and special drying and solvent exchange are avoided.The xerogels show non-shrinkage and a short preparation time of 24 h.The resulted activated carbon xerogels with interconnected hierarchically micro-meso-macropores exhibit an optimal specific surface area of 1520 m^(2)/g(through xerogels pyrolysis and the pore-forming of ZnCl_(2)),high adsorption(methylene blue,I-,Cu^(2+),etc.),and repeated adsorption ability.This work provides novel thought for porous nanomaterials with non-shrinkage and desirable structures in adsorption and energy storage.展开更多
In this work,we investigate how activated carbon(AC)derived from olive pomace biomass can be used as an anode material in lithium-ion batteries.The biomass-derived activated carbon has the potential to be highly effic...In this work,we investigate how activated carbon(AC)derived from olive pomace biomass can be used as an anode material in lithium-ion batteries.The biomass-derived activated carbon has the potential to be highly efficient,deliver high performance,sustainable,and cost-effective in LIBs-related production.The activated carbon is prepared by using H3PO4 as a chemical activation agent,and then calcining the obtained product at 500℃ for different controlled atmospheres under(i)air(AC-Atm),(ii)vacuum(AC-Vac),and(iii)argon(ACArg).The different samples were systematically analyzed using scanning electron microscopy(SEM),Highresolution transmission electron microscopy(HRTEM),energy dispersive spectroscopy(EDS),X-ray fluores-cence(XRF),X-ray diffraction(XRD),FT-IR and Raman spectroscopy,and thermogravimetric analysis(TGA)to assess their properties.The electrochemical properties of the carbonaceous materials were studied by galvano-static cycling,cyclic voltammetry(CV),and electrochemical impedance spectroscopy(EIS).The results showed high specific capacity and stable cycling performance,with capacities of 288,184,and 56 mAh g^(-1) at the current density of 25 mA g^(-1) after 70 cycles for AC-Arg,AC-Vac,and AC-Atm respectively.Furthermore,the CE efficiency was nearly 100%from the first cycles.This study opens up interesting prospects and offers promising oppor-tunities for more efficient recovery of unused olive pomace waste,by integrating it into energy storage appli-cations,particularly sustainable lithium-ion batteries.展开更多
This study addresses the challenges posed by dispersive soil in various engineering fields,including hydraulic and agricultural engineering,by exploring the effects of physical adsorption on soil modification.The prim...This study addresses the challenges posed by dispersive soil in various engineering fields,including hydraulic and agricultural engineering,by exploring the effects of physical adsorption on soil modification.The primary objective is to identify an environmentally friendly stabilizer that can alleviate cracking and erosion resulting from soil dispersivity.Activated carbon(AC),known for its porous nature,was examined for its potential to enhance soil strength and erosion resistance.The charge neutralization process was evaluated by monitoring pH and conductivity,in addition to a comprehensive analysis of microscopic and mineral properties.The results show that high sodium levels or low clay contents result in the dispersive nature of soil in water.However,the incorporation of AC can transform such soil into a non-dispersive state.Moreover,both soil strength and erosion resistance exhibited enhancements with increasing AC content and curing duration.The incorporation of AC resulted in a maximum 5.6-fold increase in unconfined compressive strength and a 1.8-fold increase in tensile strength for dispersive soil.Notably,a significant correlation was observed during the curing phase among soil dispersivity,mechanical properties,and pH values.Microscopic analyses revealed that the porous structure of AC facilitated a filling effect and enhanced adsorption capacity,which contributed to improved soil characteristics and reduced dispersivity.The release of hydrogen ions and the formation of aggregates promote water stability.Validation tests conducted on dispersive soil from northern Shaanxi demonstrated the efficacy of physical adsorption using AC as a viable method for modifying dispersive soil in the water conservancy hub.展开更多
Modified activated carbons(AS)were fabricated through the oxidation effect of ammonium persulfate and applied to the dynamic adsorption of different acrylate gas.The pore structures,surface chemical properties and sur...Modified activated carbons(AS)were fabricated through the oxidation effect of ammonium persulfate and applied to the dynamic adsorption of different acrylate gas.The pore structures,surface chemical properties and surface morphology of AS were respectively characterized by N2 adsorption,Boehm titration,X-ray Photoelectron Spectroscopy(XPS)and scanning electron microscopy(SEM)techniques.After modification,the specific surface area increased from 954 to 1154 m^(2)·g^(-1).The contents of oxygen-containing functional groups on the AS surface increase obviously and have a great effect on the adsorption behavior of acrylate gases.According to the results of dynamic adsorption,the adsorption capacities of acrylates are as the following order:methyl acrylate(461.9 mg·g^(-1))>methyl methacrylate(436.9 mg·g^(-1))>butyl acrylate(381.8 mg·g^(-1)),which is attributed to the size adaptability of AS pores and acrylates.The adsorption behavior of AS for acrylate gases conforms to the Bangham model and the Temkin model.展开更多
Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxi...Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxification of CWAs are vital for the safety of first responders,military personnel,and civilians,driving significant research in this area.Herein,we designed and synthesized a poly(-diallyldimethylammonium chloride)(PDDA)mediated cupric oxide(CuO)functionalized activated carbon fabric(ACF),termed ACF@PDDA-CuO,as an adsorbent filter material for self-detoxifying chemical protective clothing.PDDA,a positively charged polyelectrolyte,effectively binds in-situ synthesized CuO to the negatively charged ACF surface,serving as a suitable binder.This study demonstrates the synergistic effects of PDDA-CuO functionalization on ACF,where PDDA treatment enhanced mechanical and comfort properties,and CuO crystal growth significantly improved detoxification efficacy against the CWA Nerve Agent Sarin.Comprehensive analyses,including FTIR,BET surface area analysis,SEM,EDS,TEM,STEM,TGA,XPS,and XRD,confirmed the uniform deposition of CuO and PDDA on the ACF surface.The Cu content on ACF@PDDA-CuO samples was measured via iodometric titration.The materials were evaluated for tensile strength,air permeability,water vapor permeability,nerve agent(Sarin)detoxification,and blister agent(Sulfur Mustard)breakthrough time to assess their applicability for protective clothing.The optimized PDDA-CuO on ACF detoxified 82.04%of Sarin within 18 h,compared to 25.22%by ACF alone,and enhanced tensile strength by 23.67%,air permeability by 24.63%,and water vapor permeability by 3.94%,while maintaining protection against Sulfur Mustard for 24 h.These findings indicate that ACF@PDDA-CuO is a promising candidate for CWA protective clothing,offering robust protection with enhanced comfort.展开更多
The ACF adsorbent with high Cu loading was treated with dielectric barrier discharge plasma to mitigate the negative effects of high Cu loading and enhance PH_(3)and H_(2)S adsorption and oxidation.Bruno-Emmett-Taylor...The ACF adsorbent with high Cu loading was treated with dielectric barrier discharge plasma to mitigate the negative effects of high Cu loading and enhance PH_(3)and H_(2)S adsorption and oxidation.Bruno-Emmett-Taylor(BET)result showed that the specific surface area of the adsorbent after air plasma modification was almost three times that before modification.X-ray photoelectron spectroscopy(XPS)findings revealed that the amino group was added to the adsorbent's surface,increasing lattice oxygen and chemisorbed oxygen.The adsorbent's large specific surface area,excellent surface active oxygen,and abundance of basic groups facilitate PH_(3)and H_(2)S adsorption and oxidation.The scanning electron microscopy showed that air plasma modification exposed more active components and uniformly dispersed them on the surface of adsorbent,thereby improving the adsorption performance.Activity evaluation results showed that the adsorbent has the best ability to capture PH_(3)and H_(2)S after being modified by air plasma at 4 kV voltage for 10 min.The adsorbent's breakthrough ability at high space velocity(WHSV:60,000 h^(−1))is 190 mg P/g and 146 mg S/g,respectively,which is 74%and 60%greater than that before modification.This is a great improvement over previous studies.In addition,the possible mechanism of adsorbent deactivation was proposed.展开更多
Chromium is one of the heavy metal pollutants. Heavy metal chromium-contaminated water will seriously endanger human health after use. There are many ways to remove chromium-containing sewage, and the adsorption metho...Chromium is one of the heavy metal pollutants. Heavy metal chromium-contaminated water will seriously endanger human health after use. There are many ways to remove chromium-containing sewage, and the adsorption method is the most effective and convenient method. The adsorption amount of traditional activated carbon is limited, so it needs to be modified to improve the adsorption rate. This experiment determined a reasonable modification method, and the calcination method was selected for the modification. This paper mainly compares the surface morphological characteristics of activated carbon before and after modification. The modified X-ray diffraction peak is increased and the infrared ray absorption peak increased, and the results show that the surface of the modified activated carbon is more rough than that of the modified activated carbon, the functional groups are increased, and the sulfur and nitrogen are doped on the activated carbon. Therefore, the modified activated carbon has a high removal rate and the best performance under acidic conditions.展开更多
Halogenated benzoquinones(HBQs)could cause bladder cancer,but there were few related studies on the generation and control.In this study,the impact of different precursors,pH,bromide concentration,and algae-derived or...Halogenated benzoquinones(HBQs)could cause bladder cancer,but there were few related studies on the generation and control.In this study,the impact of different precursors,pH,bromide concentration,and algae-derived organic matters on the formation of HBQs and the removal efficiency by activated carbon were investigated.It was found that the chlorination of bisphenol A produced the most 2,6-dichloro-1,4-benzoquinone(2,6-DCBQ),reaching 14.86μg/L at 1 hr,followed by tyrosine,2-chlorophenol,P-hydroxybenzoic acid,trichlorophenol,and N-methylaniline.The production of 2,6-DCBQ increased first and then decreased from 0 to 36 hr(chlorination doses 0-20 mg/L),indicating that HBQs were unstable in water.Trihalomethanes(THMs)were detected during chlorination,and the concentration increased with prolongation of reaction time.2,6-DCBQ production decreased and 2,6-dibromo-1,4-benzoquinone(2,6-DBBQ)production increased with increment bromide concentration and the bromide promoted the formation of tribromomethane.The production of 2,6-DCBQ decreased with increase of pH,and the maximum production was 141.38μg/L at pH of 5.Microcystis aeruginosa,Chlorella algae cells,and intracellular organic matters(IOM)could be chlorinated as potential precursors for HBQs.The most amount of 2,6-DCBQ was generated from algae cells of Microcystis aeruginosa,followed by Chlorella algae cells,Microcystis aeruginosa IOM,and Chlorella IOM.This study compared the removal efficiency of HBQs by granular activated carbon(GAC)and columnar activated carbon(CAC)under different carbon doses and initial concentrations of HBQs.It was found that the removal efficiency by GAC(80.1%)was higher than that by CAC(51.8%),indicating that GAC has better control for HBQs.展开更多
Flue gas and coal bed methane are two important sources of greenhouse gases.Pressure swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is crucial.In...Flue gas and coal bed methane are two important sources of greenhouse gases.Pressure swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is crucial.In this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 kPa.The experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric heat.Both the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular sieve.Moreover,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) separation.The study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.展开更多
Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce d...Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.展开更多
Defluoridation of coal mining water is of great significance for sustainable development of coal industry in western China.A novel one-step mechanochemical method was developed to prepare polymeric aluminum modified p...Defluoridation of coal mining water is of great significance for sustainable development of coal industry in western China.A novel one-step mechanochemical method was developed to prepare polymeric aluminum modified powder activated carbon(PAC)for effective fluoride removal from coal mining water.Aluminum was stably loaded on the PAC through facile solid-phase reaction between polymeric aluminum(polyaluminum chloride(PACl)or polyaluminum ferric chloride(PAFC))and PAC(1:15 W/W).Fluoride adsorption on PACl and PAFC modified PAC(C-PACl and C-PAFC)all reached equilibrium within 5 min,at rate of 2.56 g mg^(-1)sec^(-1)and 1.31 g mg^(-1)sec^(-1)respectively.Larger increase of binding energy of Al on C-PACl(Al–F bond:76.64 eV and Al–FOH bond:77.70 eV)relative to that of Al on C-PAFC(Al–F bond:76.52 eV)explained higher fluoride uptake capacity of C-PACl.Less chloride was released from C-PACl than that from C-PAFC due to its higher proportion of covalent chlorine and lower proportion of ionic chlorine.The elements mapping and atomic composition proved the stability of Al loaded on the PAC as well as the enrichment of fluoride on both CPACl and C-PAFC.The Bader charge,formation energy and bond length obtained from DFT computational results explained the fluoride adsorption mechanism further.The carbon emission was 7.73 kg CO_(2)-eq/kg adsorbent prepared through mechanochemical process,which was as low as 1:82.3 to 1:8.07×10^(4)compared with the ones prepared by conventional hydrothermal methods.展开更多
There has recently been a fundamental need to develop high efficiency microwave absorbers to reduce electro-magnet-ic pollution.It is often very difficult to obtain superior absorption with only one material,so we hav...There has recently been a fundamental need to develop high efficiency microwave absorbers to reduce electro-magnet-ic pollution.It is often very difficult to obtain superior absorption with only one material,so we have explored composites using fillers of activated carbon derived from biological material(oleaster seeds)and resin(apricot tree gum)with Fe_(3)O_(4) in a paraffin wax matrix to improve the dielectric properties and achieve a high specific surface area.A 1 mm thick layer of a Fe_(3)O_(4)+resin(FEOR),with the magnetic nanoparticles anchored to the gum,resulted in a reflection loss of−71.09 dB.We compared this with the results for composites using a filler of Fe_(3)O_(4)+activated carbon,and one with a three-component filler of Fe_(3)O_(4)+activated carbon+resin which had a very porous structure that had a direct effect on the surface polarization.However,the FEOR sample had near-ideal im-pedance matching,close to 1,which resulted in high absorption performance.In addition,the presence of defects improves mi-crowave attenuation by dipole polarization and charge carrier trapping.This work suggests the use of new types of biomaterials to in-crease microwave absorption.展开更多
Cyanobacteria-based activated carbon(CBAC)was successfully prepared by pyrolysis-activation of Taihu cyanobacteria.When the impregnation ratio and activated temperature were 2 and 800-C,respectively,the optimal CBACs ...Cyanobacteria-based activated carbon(CBAC)was successfully prepared by pyrolysis-activation of Taihu cyanobacteria.When the impregnation ratio and activated temperature were 2 and 800-C,respectively,the optimal CBACs possessed an ultra-high specific surface(2178.90 m^(2)·g^(-1))and plenty of micro-and meso-pores,as well as a high pore volume(1.01 cm^(3)·g^(-1)).Ascribed to ultra-high surface area,π-π interaction,electrostatic interaction,as well as hydrogen-bonding interactions,the CBACs displayed huge superiority in efficient dye removal.The saturated methylene blue adsorption capacity by CBACs could be as high as 1143.4 mg·g^(-1),superior to that of other reported biomass-activated carbons.The adsorption was endothermic and modeled well by the pseudo-second-order kinetic,intra-particle diffusion,and Langmuir models.This work presented the effectiveness of Taihu cyanobacteria adsorbent ascribed to its super large specific surface area and high adsorption ability.展开更多
Activated carbon preparation from sugarcane leaves and rice straw by carbonization(250℃–400℃)and activation at 500℃were studied.The effects of pre-oxidation,hydrolysis of derived charcoals by boiled KMnO4 aqueous ...Activated carbon preparation from sugarcane leaves and rice straw by carbonization(250℃–400℃)and activation at 500℃were studied.The effects of pre-oxidation,hydrolysis of derived charcoals by boiled KMnO4 aqueous solution were evaluated.The derived charcoals products were pretreated using oxidation-hydrolysis with 1–5 wt.%KMnO4 at 100℃and then activated at 500℃.The derived charcoal and activated carbon products were characterized by FTIR,XRD,SEM-EDS and BET.Iodine number and methylene blue number of derived products were also used for the analysis of the products.It was found that fabricated charcoal materials made at 350℃–400℃possess good characteristics with low content of surface functional groups and high carbon content.After pre-oxidation-hydrolysis and activation at 500℃,the resulting derived activated carbon materials from charcoals with 400℃carbonization temperature have high content of oxygen containing surface functional groups such as Mn-O,Si-O,Si-O-Si,C-O,or O-H.In addition,MnO_(2) accumulated on the surface of the derived activated carbon products.The surface area and pore volume of the activated carbon products have also increased with increasing of KMnO_(4) concentration from 1 to 3 wt.%and then decreased with 5 wt.%used during activation.Therefore,activated carbon products made by pre-oxidation-hydrolysis with 3 wt.%KMnO_(4) were used for Fe(Ⅲ)adsorption experiments.It was found that Fe(Ⅲ)adsorption on the activated carbon materials can be fitted with both the Freundlich and the Langmuir models.The calculated maximum Fe(Ⅲ)adsorption capacities of sugarcane leaves derived activated carbon and rice straw derived activated carbon products were 50.00 and 39.37 mg/g,respectively.It was shown that the effect of pre-oxidation-hydrolysis by KMnO_(4) and activation at 500℃are beneficial for activated carbon preparation with environmentally friendly and low-cost simplified operation.展开更多
In this research,activated carbon from mangosteen peel has been synthesized using sulfuric acid as an activator.The adsorption performance of the activated carbon was optimized using malachite green dye as absorbate.M...In this research,activated carbon from mangosteen peel has been synthesized using sulfuric acid as an activator.The adsorption performance of the activated carbon was optimized using malachite green dye as absorbate.Mala-chite green dye waste is a toxic and non-biodegradable material that damages the environment.Optimization of adsorption processes was carried out using Response Surface Methodology(RSM)with a Box-Behnken Design(BBD).The synthesized activated carbon was characterized using FTIR and SEM instruments.The FTIR spectra confirmed the presence of a sulfonate group(-SO_(3)H)in the activated carbon,indicating that the activation pro-cess using sulfuric acid was successful.SEM characterization shows that activated carbon has porous morphology.Optimization was carried out for three adsorption parameters,namely contact time(20,60,and 120 min),adsor-bent mass(0.005,0.025,and 0.05 g),and initial concentration of malachite green solution(5,50,and 100 mg·L^(-1)).The concentration of the malachite green solution was determined using a UV-Vis spectrophotometer at the max-imum wavelength of malachite green,618 nm.The optimum of malachite green adsorption using mangosteen peel activated carbon was obtained at a contact time of 80 min,an adsorbent mass of 0.032 g,and malachite green initial concentration of 25 mg·L^(-1),with a maximum removal percentage and maximum adsorption capacity of 93.66%and 19.345 mg·g^(-1),respectively.展开更多
The accessibility of tetracycline resistance gene (tetG) into the pores of activated carbon (AC), as well as the impact of the pore size distribution (PSD) of AC on the uptake capacity of tetG, were investigated using...The accessibility of tetracycline resistance gene (tetG) into the pores of activated carbon (AC), as well as the impact of the pore size distribution (PSD) of AC on the uptake capacity of tetG, were investigated using eight types of AC (four coal-based and four wood-based). AC showed the capability to admit tetG and the average reduction of tetG for coal-based and wood-based ACs at the AC dose of 1 g·L<sup>-1</sup> was 3.12 log and 3.65 log, respectively. The uptake kinetic analysis showed that the uptake of the gene followed the pseudo-second-order kinetics reaction, and the uptake rate constant for the coal-based and wood-based ACs was in the range of 5.97 × 10<sup>-12</sup> - 4.64 × 10<sup>-9</sup> and 7.02 × 10<sup>-11</sup> - 1.59 × 10<sup>-8</sup> copies·mg<sup>-1</sup>·min<sup>-1</sup>, respectively. The uptake capacity analysis by fitting the obtained experiment data with the Freundlich isotherm model indicated that the uptake constant (K<sub>F</sub>) values were 1.71 × 10<sup>3</sup> - 8.00 × 10<sup>9</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for coal-based ACs and 7.00 × 10<sup>8</sup> - 3.00 × 10<sup>10</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for wood-based ones. In addition, the correlation analysis between K<sub>F</sub> values and pore volume as well as pore surface at different pore size regions of ACs showed that relatively higher positive correlation was found for pores of 50 - 100 Å, suggesting ACs with more pores in this size region can uptake more tetG. The findings of this study are valuable as reference for optimizing the adsorption process regarding antibiotic resistance-related concerns in drinking water treatment.展开更多
Activated carbons (ACs) calcined at 400˚C, 500˚C, and 600˚C (AC-400, AC-500, and AC-600) were prepared using palm nut shells from Gabon as raw material and zinc chloride (ZnCl2) as a chemical activating agent. Prepare...Activated carbons (ACs) calcined at 400˚C, 500˚C, and 600˚C (AC-400, AC-500, and AC-600) were prepared using palm nut shells from Gabon as raw material and zinc chloride (ZnCl2) as a chemical activating agent. Prepared ACs were characterized by physisorption of nitrogen (N2), determination of diode and methylene blue numbers for studies of porosity and by quantification and determination of surface functional groups and pH at point of zero charge (pHpzc) respectively, for studies of chemical properties of prepared ACs. Then, effects of calcination temperature (Tcal) on porosity and chemical properties of prepared ACs were studied. The results obtained showed that when the calcination temperature increases from 500˚C to 600˚C, the porosity and chemical properties of prepared ACs are modified. Indeed, the methylene blue and iodine numbers determined for activated carbons AC-400 (460 and 7.94 mg·g−1, respectively) and AC-500 (680 and 8.90 mg·g−1, respectively) are higher than those obtained for AC-600 (360 and 5.75 mg·g−1, respectively). Compared to the AC-500 adsorbent, specific surface areas (SBET) and microporous volume losses for AC-600 were estimated to 44.7% and 45.8%, respectively. Moreover, in our experimental conditions, the effect of Tcal on the quantities of acidic and basic functional groups on the surface of the ACs appears negligible. In addition, results of the pHpzc of prepared ACs showed that as Tcal increases, the pH of the adsorbents increases and tends towards neutrality. Indeed, a stronger acidity was determined on AC-400 (pHpzc = 5.60) compared to those on AC-500 and AC-600 (pHpzc = 6.85 and 6.70, respectively). Also according to the results of porosity and chemical characterizations, adsorption being a surface phenomenon, 500˚C appears to be the optimal calcination temperature for the preparation of activated carbons from palm nut shells in our experimental conditions.展开更多
The goal of this work is to improve the simultaneous removal of Pb2+, Cu2+, Zn2+, and Cd2+ ions from synthetic wastewater in a fixed bed column by incorporating sodium dodecyl sulfate (SDS) onto the surface of activat...The goal of this work is to improve the simultaneous removal of Pb2+, Cu2+, Zn2+, and Cd2+ ions from synthetic wastewater in a fixed bed column by incorporating sodium dodecyl sulfate (SDS) onto the surface of activated carbon made from coconut shells. The activated carbons were characterized using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy-energy dispersive x-ray (SEM-EDX). The adsorption column dynamics were studied by varying the flow rates (5, 10 and 15 mL/min), bed heights (10, 15 and 20 cm), and initial concentrations (50, 150, and 250 mg/L). The activated carbon has a pore volume of 0.715 cm3/g and a BET-specific surface area of 1410 m2/g. Sodium dodecyl sulfate (SDS) surfactant incorporation onto the surface of the activated carbon enhances its capacity for simultaneous adsorption of Pb2+, Cu2+, Zn2+, and Cd2+ from the aqueous medium. The affinity of the heavy metals to both unmodified (AC) and modified (AC-SDS) activated carbons followed the order of Pb2+ > Cu2+ > Zn2+ > Cd2+. The dynamic adsorption of the column depends on the flow rate, bed height, initial metal concentration, and SDS surface modification. With a 5 mL/min flow rate, a 20 cm bed height, and a 50 mg/L initial metal concentration, a maximum break-through time of 150 minutes for the unmodified activated carbon (AC) and 180 minutes for the SDS-modified activated carbon (AC-SDS) was reached.展开更多
基金supported by the Science and Technology Support Plan for Youth Innovation of Colleges and Universities of Shandong Province of China(2023KJ122)State Grid Shandong Electric Power Company Science and Technology Project(520618240009)Doctoral Research Fund of Shandong Jianzhu University(XNBS1838).
文摘High electrochemical performance supercapacitors require activated carbon with high specific surface area,suitable pore size distribution and surface properties,and high electrical conductivity as electrode materials,whereas there exists a trade-off relationship between specific surface area and electrical conductivity,which is not well met by a single type of carbon source.To solve this problem,the coal and sargassum are adopted to obtain the coupling product via co-thermal dissolution,followed by carbonization and KOH activation.The effects of mixing mass ratio and activation temperature on the prepared activated carbon(AC)are investigated using single factor experimental method.The experimental results show that AC_(1/3-800)has abundant micropore and mesopore content,good pore structure connectivity,high electrical conductivity and good wettability,and superior electrochemical properties compared with other activated carbons prepared in this experiment.Its total specific surface area is up to 2098.5 m^(2)·g^(-1),the pore volume is up to 1.33 cm^(3)·g^(-1),the content of mespores with diameter of 6-8 nm is significantly increased,and the pore size distribution is wide and uniform.When the current density increases from 0.1 to 10 A·g^(-1),the gravimetric capacitance decreases from 219 to 186 F·g^(-1)with a capacitance retention of 84.9%,the equivalent series resistance is very small,and the rate performance and reversibility of charging and discharging have also been excellent.
基金supported by the Key Research and Development Projects in Zhejiang Province(Nos.2023C03127,2024C03114,2024C03108)the Natural Science Foundation of China(Nos.22208300,22078294)+2 种基金the Natural Science Foundation of Zhejiang Province(No.LQ23B060007)the Fundamental Research Funds for the Provincial Universities of Zhejiang(No.RF-A2023004)Zhejiang Provincial Postdoctoral Science Foundation(No.ZJ2023145).
文摘Herein,the association between the dynamic adsorption capacity of toluene and several important characteristic values on activated carbon(AC)samples was investigated by multidimensional linear regression.Among the characteristic values,the carbon tetrachloride(CTC)adsorption value has demonstrated relatively stronger correlation with the toluene adsorption capacity on AC sampleswith diverse sources and forms,particularly in exposure to high-concentration toluene.Notably,the relevance of the toluene adsorption capacity to the CTC value could also be extended to a series of other porous adsorbents,which proved the wide applicability of CTC value in characterizing the adsorption behaviors.Based on these results,a mathematical and visual model was then established to predict the toluene adsorption saturation under different conditions(inlet concentration,adsorption time,initial CTC value,etc.)on diverse AC samples,of which the accuracy has later been verified by experimental data.As such,a fast and accurate estimation of the adsorption behaviors over AC samples,and possibly other porous adsorbents,was realized.
基金supported by the National Key Research and Development Program of China(No.2023YFB3711501)the Shanghai Industrial Collaborative Innovation Leading Group Office(No.XTCX-KJ-2023-53)+3 种基金the Fundamental Research Funds for the Central Universities(No.23D110609)the Open Research Fund of Songshan Lake Materials Laboratory(No.2022SLABFN09)the Foundation of State Key Laboratory of Biobased Material and Green Paper-making,Qilu University of Technology,Shandong Academy of Sciences(No.GZKF202231)the Fundamental Research Funds for the Central Universities and Graduate Student Innovation Fund of Donghua University(No.CUSF-DH-d-2022012).
文摘Designing xerogels at the molecular level to overcome volume shrinkage is a promising strategy for carbon xerogels with desirable structure and performance.Here,we design a xerogel with non-shrinkage by introducing ZnCl_(2) into resorcinol-melamine-formaldehyde polymerization.The gel network consisting of micrometer pores and large particles(0.26-1.35μm)is constructed by the coordination of Zn^(2+) with oxygen/nitrogen-containing groups,which is attributed to the structural support of the rigid triazine skeleton with large steric hindrance.Therefore,the reinforced gel network possesses enough strength to withstand capillary forces during atmospheric drying,and special drying and solvent exchange are avoided.The xerogels show non-shrinkage and a short preparation time of 24 h.The resulted activated carbon xerogels with interconnected hierarchically micro-meso-macropores exhibit an optimal specific surface area of 1520 m^(2)/g(through xerogels pyrolysis and the pore-forming of ZnCl_(2)),high adsorption(methylene blue,I-,Cu^(2+),etc.),and repeated adsorption ability.This work provides novel thought for porous nanomaterials with non-shrinkage and desirable structures in adsorption and energy storage.
文摘In this work,we investigate how activated carbon(AC)derived from olive pomace biomass can be used as an anode material in lithium-ion batteries.The biomass-derived activated carbon has the potential to be highly efficient,deliver high performance,sustainable,and cost-effective in LIBs-related production.The activated carbon is prepared by using H3PO4 as a chemical activation agent,and then calcining the obtained product at 500℃ for different controlled atmospheres under(i)air(AC-Atm),(ii)vacuum(AC-Vac),and(iii)argon(ACArg).The different samples were systematically analyzed using scanning electron microscopy(SEM),Highresolution transmission electron microscopy(HRTEM),energy dispersive spectroscopy(EDS),X-ray fluores-cence(XRF),X-ray diffraction(XRD),FT-IR and Raman spectroscopy,and thermogravimetric analysis(TGA)to assess their properties.The electrochemical properties of the carbonaceous materials were studied by galvano-static cycling,cyclic voltammetry(CV),and electrochemical impedance spectroscopy(EIS).The results showed high specific capacity and stable cycling performance,with capacities of 288,184,and 56 mAh g^(-1) at the current density of 25 mA g^(-1) after 70 cycles for AC-Arg,AC-Vac,and AC-Atm respectively.Furthermore,the CE efficiency was nearly 100%from the first cycles.This study opens up interesting prospects and offers promising oppor-tunities for more efficient recovery of unused olive pomace waste,by integrating it into energy storage appli-cations,particularly sustainable lithium-ion batteries.
基金financially supported by the National Postdoctoral Program for Innovative Talents(Grant No.BX20200287)the National Natural Science Foundation of China(Grant Nos.52079116 and 52378322).
文摘This study addresses the challenges posed by dispersive soil in various engineering fields,including hydraulic and agricultural engineering,by exploring the effects of physical adsorption on soil modification.The primary objective is to identify an environmentally friendly stabilizer that can alleviate cracking and erosion resulting from soil dispersivity.Activated carbon(AC),known for its porous nature,was examined for its potential to enhance soil strength and erosion resistance.The charge neutralization process was evaluated by monitoring pH and conductivity,in addition to a comprehensive analysis of microscopic and mineral properties.The results show that high sodium levels or low clay contents result in the dispersive nature of soil in water.However,the incorporation of AC can transform such soil into a non-dispersive state.Moreover,both soil strength and erosion resistance exhibited enhancements with increasing AC content and curing duration.The incorporation of AC resulted in a maximum 5.6-fold increase in unconfined compressive strength and a 1.8-fold increase in tensile strength for dispersive soil.Notably,a significant correlation was observed during the curing phase among soil dispersivity,mechanical properties,and pH values.Microscopic analyses revealed that the porous structure of AC facilitated a filling effect and enhanced adsorption capacity,which contributed to improved soil characteristics and reduced dispersivity.The release of hydrogen ions and the formation of aggregates promote water stability.Validation tests conducted on dispersive soil from northern Shaanxi demonstrated the efficacy of physical adsorption using AC as a viable method for modifying dispersive soil in the water conservancy hub.
基金Funded by the National Natural Science Foundation of China(No.51873167)the Self-determined and Innovative Research Funds of WUT(No.2024-CL-B1-02)。
文摘Modified activated carbons(AS)were fabricated through the oxidation effect of ammonium persulfate and applied to the dynamic adsorption of different acrylate gas.The pore structures,surface chemical properties and surface morphology of AS were respectively characterized by N2 adsorption,Boehm titration,X-ray Photoelectron Spectroscopy(XPS)and scanning electron microscopy(SEM)techniques.After modification,the specific surface area increased from 954 to 1154 m^(2)·g^(-1).The contents of oxygen-containing functional groups on the AS surface increase obviously and have a great effect on the adsorption behavior of acrylate gases.According to the results of dynamic adsorption,the adsorption capacities of acrylates are as the following order:methyl acrylate(461.9 mg·g^(-1))>methyl methacrylate(436.9 mg·g^(-1))>butyl acrylate(381.8 mg·g^(-1)),which is attributed to the size adaptability of AS pores and acrylates.The adsorption behavior of AS for acrylate gases conforms to the Bangham model and the Temkin model.
基金Defence Research and Development Establishment(DRDE),DRDO,Gwalior-474002,(India)for his keen interestencouragement.The DRDE accession number for this manuscript is DRDE-IREC-130-28/03/2024.
文摘Chemical warfare agents(CWAs)are extremely lethal substances used in warfare and terrorism,capable of causing permanent damage even in small doses,despite medical intervention.Therefore,detection,protection,and detoxification of CWAs are vital for the safety of first responders,military personnel,and civilians,driving significant research in this area.Herein,we designed and synthesized a poly(-diallyldimethylammonium chloride)(PDDA)mediated cupric oxide(CuO)functionalized activated carbon fabric(ACF),termed ACF@PDDA-CuO,as an adsorbent filter material for self-detoxifying chemical protective clothing.PDDA,a positively charged polyelectrolyte,effectively binds in-situ synthesized CuO to the negatively charged ACF surface,serving as a suitable binder.This study demonstrates the synergistic effects of PDDA-CuO functionalization on ACF,where PDDA treatment enhanced mechanical and comfort properties,and CuO crystal growth significantly improved detoxification efficacy against the CWA Nerve Agent Sarin.Comprehensive analyses,including FTIR,BET surface area analysis,SEM,EDS,TEM,STEM,TGA,XPS,and XRD,confirmed the uniform deposition of CuO and PDDA on the ACF surface.The Cu content on ACF@PDDA-CuO samples was measured via iodometric titration.The materials were evaluated for tensile strength,air permeability,water vapor permeability,nerve agent(Sarin)detoxification,and blister agent(Sulfur Mustard)breakthrough time to assess their applicability for protective clothing.The optimized PDDA-CuO on ACF detoxified 82.04%of Sarin within 18 h,compared to 25.22%by ACF alone,and enhanced tensile strength by 23.67%,air permeability by 24.63%,and water vapor permeability by 3.94%,while maintaining protection against Sulfur Mustard for 24 h.These findings indicate that ACF@PDDA-CuO is a promising candidate for CWA protective clothing,offering robust protection with enhanced comfort.
基金supported by Yunnan Major Scientific and Technological Projects(No.202202AG050005)Yunnan Fundamental Research Projects(No.202101BE070001-001).
文摘The ACF adsorbent with high Cu loading was treated with dielectric barrier discharge plasma to mitigate the negative effects of high Cu loading and enhance PH_(3)and H_(2)S adsorption and oxidation.Bruno-Emmett-Taylor(BET)result showed that the specific surface area of the adsorbent after air plasma modification was almost three times that before modification.X-ray photoelectron spectroscopy(XPS)findings revealed that the amino group was added to the adsorbent's surface,increasing lattice oxygen and chemisorbed oxygen.The adsorbent's large specific surface area,excellent surface active oxygen,and abundance of basic groups facilitate PH_(3)and H_(2)S adsorption and oxidation.The scanning electron microscopy showed that air plasma modification exposed more active components and uniformly dispersed them on the surface of adsorbent,thereby improving the adsorption performance.Activity evaluation results showed that the adsorbent has the best ability to capture PH_(3)and H_(2)S after being modified by air plasma at 4 kV voltage for 10 min.The adsorbent's breakthrough ability at high space velocity(WHSV:60,000 h^(−1))is 190 mg P/g and 146 mg S/g,respectively,which is 74%and 60%greater than that before modification.This is a great improvement over previous studies.In addition,the possible mechanism of adsorbent deactivation was proposed.
文摘Chromium is one of the heavy metal pollutants. Heavy metal chromium-contaminated water will seriously endanger human health after use. There are many ways to remove chromium-containing sewage, and the adsorption method is the most effective and convenient method. The adsorption amount of traditional activated carbon is limited, so it needs to be modified to improve the adsorption rate. This experiment determined a reasonable modification method, and the calcination method was selected for the modification. This paper mainly compares the surface morphological characteristics of activated carbon before and after modification. The modified X-ray diffraction peak is increased and the infrared ray absorption peak increased, and the results show that the surface of the modified activated carbon is more rough than that of the modified activated carbon, the functional groups are increased, and the sulfur and nitrogen are doped on the activated carbon. Therefore, the modified activated carbon has a high removal rate and the best performance under acidic conditions.
基金supported by the National Natural Science Foundation of China (Nos.51608011 and 42007350)the National Key Research and Development program of China (Nos.2019YFC1906303,2019YFC1906000-4,and 2019YFD1100304)the Natural Science Foundation of Beijing Municipal (No.8202010)。
文摘Halogenated benzoquinones(HBQs)could cause bladder cancer,but there were few related studies on the generation and control.In this study,the impact of different precursors,pH,bromide concentration,and algae-derived organic matters on the formation of HBQs and the removal efficiency by activated carbon were investigated.It was found that the chlorination of bisphenol A produced the most 2,6-dichloro-1,4-benzoquinone(2,6-DCBQ),reaching 14.86μg/L at 1 hr,followed by tyrosine,2-chlorophenol,P-hydroxybenzoic acid,trichlorophenol,and N-methylaniline.The production of 2,6-DCBQ increased first and then decreased from 0 to 36 hr(chlorination doses 0-20 mg/L),indicating that HBQs were unstable in water.Trihalomethanes(THMs)were detected during chlorination,and the concentration increased with prolongation of reaction time.2,6-DCBQ production decreased and 2,6-dibromo-1,4-benzoquinone(2,6-DBBQ)production increased with increment bromide concentration and the bromide promoted the formation of tribromomethane.The production of 2,6-DCBQ decreased with increase of pH,and the maximum production was 141.38μg/L at pH of 5.Microcystis aeruginosa,Chlorella algae cells,and intracellular organic matters(IOM)could be chlorinated as potential precursors for HBQs.The most amount of 2,6-DCBQ was generated from algae cells of Microcystis aeruginosa,followed by Chlorella algae cells,Microcystis aeruginosa IOM,and Chlorella IOM.This study compared the removal efficiency of HBQs by granular activated carbon(GAC)and columnar activated carbon(CAC)under different carbon doses and initial concentrations of HBQs.It was found that the removal efficiency by GAC(80.1%)was higher than that by CAC(51.8%),indicating that GAC has better control for HBQs.
基金supported by the renewable energy and hydrogen projects in National Key Research and Development Plan of China(2019YFB1505000).
文摘Flue gas and coal bed methane are two important sources of greenhouse gases.Pressure swing adsorption process has a wide range of application in the field of gas separation,and the selection of adsorbent is crucial.In this regard,in order to assess the better adsorbent for separating CO_(2) from flue gas and CH_(4) from coal bed methane,adsorption isotherms of CO_(2),CH_(4) and N_(2) on activated carbon and carbon molecular sieve are measured at 303.15,318.15 and 333.15 K,and up to 250 kPa.The experimental data fit better with Langmuir 2 compared to Langmuir 3 and Langmuir-Freundlich models,and Clausius-Clapeyron equation was used to calculate the isosteric heat.Both the order of the adsorbed amount and the adsorption heat on the two adsorbents are CO_(2)>CH_(4)>N_(2).The adsorption kinetics are calculated by the pseudo-first kinetic model,and the order of adsorption rates on activated carbon is N_(2)-CH_(4)>CO_(2),while on carbon molecular sieve,it is CO_(2)-N_(2)>CH_(4).It is shown that relative molecular mass and adsorption heat are the primary effect on kinetics for activated carbon,while kinetic diameter is the main resistance factor for carbon molecular sieve.Moreover,the adsorption selectivity of CH_(4)/N_(2) and CO_(2)/N_(2) were estimated with the ideal adsorption solution theory,and carbon molecular sieve performed best at 318.15 K for both CO_(2) and CH_(4) separation.The study suggested that activated carbon is a better choice for separating flue gas and carbon molecular sieve can be a strong candidate for separating coal bed methane.
基金supported by the National Natural Science Foundation of China(52276195)Program for Supporting Innovative Research from Jinan(202228072)Program of Agricultural Development from Shandong(SD2019NJ015)。
文摘Development of pore structures of activated carbon(AC)from activation of biomass with ZnCl_(2) relies on content and structure of cellulose/hemicellulose in the feedstock.Thermal pretreatment of biomass could induce dehydration and/or aromatization to change the structure of cellulose/hemicellulose.This might interfere with evolution of structures of AC,which was investigated herein via thermal pretreatment of willow branch(WB)from 200 to 360℃and the subsequent activation with ZnCl_(2) at 550℃.The results showed that thermal pretreatment at 360℃(WB-360)could lead to substantial pyrolysis to form biochar,with a yield of 31.9%,accompanying with nearly complete destruction of cellulose crystals and remarkably enhanced aromatic degree.However,cellulose residual in WB-360 could still be activated to form AC-360 with specific surface area of 1837.9 m~2·g^(-1),which was lower than that in AC from activation of untreated WB(AC-blank,2077.8 m~2·g^(-1)).Nonetheless,the AC-200 from activation of WB-200 had more developed pores(2113.9 m~2·g^(-1))and superior capability for adsorption of phenol,due to increased permeability of ZnCl_(2) to the largely intact cellulose structure in WB-200.The thermal pretreatment did increase diameters of micropores of AC but reduced the overall yield of AC(26.8%for AC-blank versus 18.0%for AC-360),resulting from accelerated cracking but reduced intensity of condensation.In-situ infrared characterization of the activation showed that ZnCl_(2) mainly catalyzed dehydration,dehydrogenation,condensation,and aromatization but not cracking,suppressing the formation of derivatives of cellulose and lignin in bio-oil.The thermal pretreatment formed phenolic-OH and C=O with higher chemical innerness,which changed the reaction network in activation,shifting morphology of fibrous structures in AC-blank to“melting surface”in AC-200 or AC-280.
基金supported by the National Natural Science Foundation of China(No.52100070)the Science and Technology Innovation Project of China Energy Investment Corporation(No.SZY93002219N).
文摘Defluoridation of coal mining water is of great significance for sustainable development of coal industry in western China.A novel one-step mechanochemical method was developed to prepare polymeric aluminum modified powder activated carbon(PAC)for effective fluoride removal from coal mining water.Aluminum was stably loaded on the PAC through facile solid-phase reaction between polymeric aluminum(polyaluminum chloride(PACl)or polyaluminum ferric chloride(PAFC))and PAC(1:15 W/W).Fluoride adsorption on PACl and PAFC modified PAC(C-PACl and C-PAFC)all reached equilibrium within 5 min,at rate of 2.56 g mg^(-1)sec^(-1)and 1.31 g mg^(-1)sec^(-1)respectively.Larger increase of binding energy of Al on C-PACl(Al–F bond:76.64 eV and Al–FOH bond:77.70 eV)relative to that of Al on C-PAFC(Al–F bond:76.52 eV)explained higher fluoride uptake capacity of C-PACl.Less chloride was released from C-PACl than that from C-PAFC due to its higher proportion of covalent chlorine and lower proportion of ionic chlorine.The elements mapping and atomic composition proved the stability of Al loaded on the PAC as well as the enrichment of fluoride on both CPACl and C-PAFC.The Bader charge,formation energy and bond length obtained from DFT computational results explained the fluoride adsorption mechanism further.The carbon emission was 7.73 kg CO_(2)-eq/kg adsorbent prepared through mechanochemical process,which was as low as 1:82.3 to 1:8.07×10^(4)compared with the ones prepared by conventional hydrothermal methods.
基金funding from Stiftelsen Olle Engkvist Byggmastare(214-0346 and 217-0014)the Swedish Research Council(202103675)。
文摘There has recently been a fundamental need to develop high efficiency microwave absorbers to reduce electro-magnet-ic pollution.It is often very difficult to obtain superior absorption with only one material,so we have explored composites using fillers of activated carbon derived from biological material(oleaster seeds)and resin(apricot tree gum)with Fe_(3)O_(4) in a paraffin wax matrix to improve the dielectric properties and achieve a high specific surface area.A 1 mm thick layer of a Fe_(3)O_(4)+resin(FEOR),with the magnetic nanoparticles anchored to the gum,resulted in a reflection loss of−71.09 dB.We compared this with the results for composites using a filler of Fe_(3)O_(4)+activated carbon,and one with a three-component filler of Fe_(3)O_(4)+activated carbon+resin which had a very porous structure that had a direct effect on the surface polarization.However,the FEOR sample had near-ideal im-pedance matching,close to 1,which resulted in high absorption performance.In addition,the presence of defects improves mi-crowave attenuation by dipole polarization and charge carrier trapping.This work suggests the use of new types of biomaterials to in-crease microwave absorption.
基金financially supported by the Key Research&Development program of Zhejiang Province(2021C03196)the National Key Research and Development Program of China(2022YFE0128600)the Natural Science Foundation of Zhejiang Province(LY22B060011).
文摘Cyanobacteria-based activated carbon(CBAC)was successfully prepared by pyrolysis-activation of Taihu cyanobacteria.When the impregnation ratio and activated temperature were 2 and 800-C,respectively,the optimal CBACs possessed an ultra-high specific surface(2178.90 m^(2)·g^(-1))and plenty of micro-and meso-pores,as well as a high pore volume(1.01 cm^(3)·g^(-1)).Ascribed to ultra-high surface area,π-π interaction,electrostatic interaction,as well as hydrogen-bonding interactions,the CBACs displayed huge superiority in efficient dye removal.The saturated methylene blue adsorption capacity by CBACs could be as high as 1143.4 mg·g^(-1),superior to that of other reported biomass-activated carbons.The adsorption was endothermic and modeled well by the pseudo-second-order kinetic,intra-particle diffusion,and Langmuir models.This work presented the effectiveness of Taihu cyanobacteria adsorbent ascribed to its super large specific surface area and high adsorption ability.
文摘Activated carbon preparation from sugarcane leaves and rice straw by carbonization(250℃–400℃)and activation at 500℃were studied.The effects of pre-oxidation,hydrolysis of derived charcoals by boiled KMnO4 aqueous solution were evaluated.The derived charcoals products were pretreated using oxidation-hydrolysis with 1–5 wt.%KMnO4 at 100℃and then activated at 500℃.The derived charcoal and activated carbon products were characterized by FTIR,XRD,SEM-EDS and BET.Iodine number and methylene blue number of derived products were also used for the analysis of the products.It was found that fabricated charcoal materials made at 350℃–400℃possess good characteristics with low content of surface functional groups and high carbon content.After pre-oxidation-hydrolysis and activation at 500℃,the resulting derived activated carbon materials from charcoals with 400℃carbonization temperature have high content of oxygen containing surface functional groups such as Mn-O,Si-O,Si-O-Si,C-O,or O-H.In addition,MnO_(2) accumulated on the surface of the derived activated carbon products.The surface area and pore volume of the activated carbon products have also increased with increasing of KMnO_(4) concentration from 1 to 3 wt.%and then decreased with 5 wt.%used during activation.Therefore,activated carbon products made by pre-oxidation-hydrolysis with 3 wt.%KMnO_(4) were used for Fe(Ⅲ)adsorption experiments.It was found that Fe(Ⅲ)adsorption on the activated carbon materials can be fitted with both the Freundlich and the Langmuir models.The calculated maximum Fe(Ⅲ)adsorption capacities of sugarcane leaves derived activated carbon and rice straw derived activated carbon products were 50.00 and 39.37 mg/g,respectively.It was shown that the effect of pre-oxidation-hydrolysis by KMnO_(4) and activation at 500℃are beneficial for activated carbon preparation with environmentally friendly and low-cost simplified operation.
文摘In this research,activated carbon from mangosteen peel has been synthesized using sulfuric acid as an activator.The adsorption performance of the activated carbon was optimized using malachite green dye as absorbate.Mala-chite green dye waste is a toxic and non-biodegradable material that damages the environment.Optimization of adsorption processes was carried out using Response Surface Methodology(RSM)with a Box-Behnken Design(BBD).The synthesized activated carbon was characterized using FTIR and SEM instruments.The FTIR spectra confirmed the presence of a sulfonate group(-SO_(3)H)in the activated carbon,indicating that the activation pro-cess using sulfuric acid was successful.SEM characterization shows that activated carbon has porous morphology.Optimization was carried out for three adsorption parameters,namely contact time(20,60,and 120 min),adsor-bent mass(0.005,0.025,and 0.05 g),and initial concentration of malachite green solution(5,50,and 100 mg·L^(-1)).The concentration of the malachite green solution was determined using a UV-Vis spectrophotometer at the max-imum wavelength of malachite green,618 nm.The optimum of malachite green adsorption using mangosteen peel activated carbon was obtained at a contact time of 80 min,an adsorbent mass of 0.032 g,and malachite green initial concentration of 25 mg·L^(-1),with a maximum removal percentage and maximum adsorption capacity of 93.66%and 19.345 mg·g^(-1),respectively.
文摘The accessibility of tetracycline resistance gene (tetG) into the pores of activated carbon (AC), as well as the impact of the pore size distribution (PSD) of AC on the uptake capacity of tetG, were investigated using eight types of AC (four coal-based and four wood-based). AC showed the capability to admit tetG and the average reduction of tetG for coal-based and wood-based ACs at the AC dose of 1 g·L<sup>-1</sup> was 3.12 log and 3.65 log, respectively. The uptake kinetic analysis showed that the uptake of the gene followed the pseudo-second-order kinetics reaction, and the uptake rate constant for the coal-based and wood-based ACs was in the range of 5.97 × 10<sup>-12</sup> - 4.64 × 10<sup>-9</sup> and 7.02 × 10<sup>-11</sup> - 1.59 × 10<sup>-8</sup> copies·mg<sup>-1</sup>·min<sup>-1</sup>, respectively. The uptake capacity analysis by fitting the obtained experiment data with the Freundlich isotherm model indicated that the uptake constant (K<sub>F</sub>) values were 1.71 × 10<sup>3</sup> - 8.00 × 10<sup>9</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for coal-based ACs and 7.00 × 10<sup>8</sup> - 3.00 × 10<sup>10</sup> (copies·g<sup>-1</sup>)<sup>1-1/n</sup> for wood-based ones. In addition, the correlation analysis between K<sub>F</sub> values and pore volume as well as pore surface at different pore size regions of ACs showed that relatively higher positive correlation was found for pores of 50 - 100 Å, suggesting ACs with more pores in this size region can uptake more tetG. The findings of this study are valuable as reference for optimizing the adsorption process regarding antibiotic resistance-related concerns in drinking water treatment.
文摘Activated carbons (ACs) calcined at 400˚C, 500˚C, and 600˚C (AC-400, AC-500, and AC-600) were prepared using palm nut shells from Gabon as raw material and zinc chloride (ZnCl2) as a chemical activating agent. Prepared ACs were characterized by physisorption of nitrogen (N2), determination of diode and methylene blue numbers for studies of porosity and by quantification and determination of surface functional groups and pH at point of zero charge (pHpzc) respectively, for studies of chemical properties of prepared ACs. Then, effects of calcination temperature (Tcal) on porosity and chemical properties of prepared ACs were studied. The results obtained showed that when the calcination temperature increases from 500˚C to 600˚C, the porosity and chemical properties of prepared ACs are modified. Indeed, the methylene blue and iodine numbers determined for activated carbons AC-400 (460 and 7.94 mg·g−1, respectively) and AC-500 (680 and 8.90 mg·g−1, respectively) are higher than those obtained for AC-600 (360 and 5.75 mg·g−1, respectively). Compared to the AC-500 adsorbent, specific surface areas (SBET) and microporous volume losses for AC-600 were estimated to 44.7% and 45.8%, respectively. Moreover, in our experimental conditions, the effect of Tcal on the quantities of acidic and basic functional groups on the surface of the ACs appears negligible. In addition, results of the pHpzc of prepared ACs showed that as Tcal increases, the pH of the adsorbents increases and tends towards neutrality. Indeed, a stronger acidity was determined on AC-400 (pHpzc = 5.60) compared to those on AC-500 and AC-600 (pHpzc = 6.85 and 6.70, respectively). Also according to the results of porosity and chemical characterizations, adsorption being a surface phenomenon, 500˚C appears to be the optimal calcination temperature for the preparation of activated carbons from palm nut shells in our experimental conditions.
文摘The goal of this work is to improve the simultaneous removal of Pb2+, Cu2+, Zn2+, and Cd2+ ions from synthetic wastewater in a fixed bed column by incorporating sodium dodecyl sulfate (SDS) onto the surface of activated carbon made from coconut shells. The activated carbons were characterized using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy-energy dispersive x-ray (SEM-EDX). The adsorption column dynamics were studied by varying the flow rates (5, 10 and 15 mL/min), bed heights (10, 15 and 20 cm), and initial concentrations (50, 150, and 250 mg/L). The activated carbon has a pore volume of 0.715 cm3/g and a BET-specific surface area of 1410 m2/g. Sodium dodecyl sulfate (SDS) surfactant incorporation onto the surface of the activated carbon enhances its capacity for simultaneous adsorption of Pb2+, Cu2+, Zn2+, and Cd2+ from the aqueous medium. The affinity of the heavy metals to both unmodified (AC) and modified (AC-SDS) activated carbons followed the order of Pb2+ > Cu2+ > Zn2+ > Cd2+. The dynamic adsorption of the column depends on the flow rate, bed height, initial metal concentration, and SDS surface modification. With a 5 mL/min flow rate, a 20 cm bed height, and a 50 mg/L initial metal concentration, a maximum break-through time of 150 minutes for the unmodified activated carbon (AC) and 180 minutes for the SDS-modified activated carbon (AC-SDS) was reached.
