Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）,...Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）, 1,6-hexanediol （HDO）, dimethylol propionic acid （DMPA） and triethylamine （TEA）. Based on butyl acrylate （BA）, 2, 2, 2-trifluoroethylmethacrylate （TFEMA） and Si-PU as a seed emulsion, a novel core-shell type acrylic-polyurethane hybrid emulsion, containing siloxane and fluorine （F-Si-PU）, was prepared by seeded emulsion polymerization. The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the chain structures of Si-PU and F-Si-PU. Investigation of transmission electron microscopy （TEM） confirmed the core-shell structure of F-Si-PU emulsion. Measurement results of water contact angle and the swelling ratio in water and n-octane for cured film showed that the water and the oil resistances for F-Si-PU had been significantly improved at a suitable content of fluorine and siloxane.展开更多
Investigated systems of acrylic-polyurethane coatings consisted of three kinds of coatings: base coat (acrylic), intermediate (polyurethane) and top coat (acrylic);each made up of two layers. Mean thickness of the coa...Investigated systems of acrylic-polyurethane coatings consisted of three kinds of coatings: base coat (acrylic), intermediate (polyurethane) and top coat (acrylic);each made up of two layers. Mean thickness of the coating system was equal (145 ± 1) μm. In time of accelerated UV ageing, electromagnetic radiation was emitted of wave length in the range (300 - 400) nm which was progressively inducing a destruction of coatings chemical structure, especially photooxidation and photolysis of coating material. Carried out X-ray investigations revealed increased contents of oxygen in aged coatings due to their photooxidation which resulted in increased tendency of coating microfragments to chip off from surface layer with the ageing time flow. The hardness increase of UV aged coatings was also observed which intensified their surface layer brittleness. This contributed to their thickness decrease by more than 10% after 2016 h of ageing. Photodestruction of UV aged coatings was documented as well by characteristics obtained during investigations carried out with DMA method use. A noticeable physical destruction of the coatings was observed in the form of silver cracks, etchings and grooves in surface layer as well as craters extending also into interlayer. Processes of physical and chemical destruction undergoing in aged coatings influenced roughness profile change and coatings surface topography shaping. After 2016 h of UV ageing, the roughness parameters (Ra, Rz, Rt) increased several times. Long-lasting UV radiation influence on the surface of investigated acrylic-polyurethane coating systems contributed to their decorativeness loss. Microscopic examinations revealed colour change (yellowing) of blue pigment contained in polyurethane interlayer. Decline in coating gloss was also observed as the result of surface roughness increase.展开更多
基金Financial supports from the National Natural Science Foundation of China(No.50273035)Hangzhou Zhijiang Silicone Chemical Industry Co.,Ltd.are acknowledged.
文摘Siliconated polyurethane （Si-PU） was synthesized using isophorone diisocyanate （IPDI）, hydroxybutyl-terminated polydimethylsiloxane （PDMS）, polytetramethylene ether glycol （PTMG）, polypropylene glycol （PPG）, 1,6-hexanediol （HDO）, dimethylol propionic acid （DMPA） and triethylamine （TEA）. Based on butyl acrylate （BA）, 2, 2, 2-trifluoroethylmethacrylate （TFEMA） and Si-PU as a seed emulsion, a novel core-shell type acrylic-polyurethane hybrid emulsion, containing siloxane and fluorine （F-Si-PU）, was prepared by seeded emulsion polymerization. The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the chain structures of Si-PU and F-Si-PU. Investigation of transmission electron microscopy （TEM） confirmed the core-shell structure of F-Si-PU emulsion. Measurement results of water contact angle and the swelling ratio in water and n-octane for cured film showed that the water and the oil resistances for F-Si-PU had been significantly improved at a suitable content of fluorine and siloxane.
文摘Investigated systems of acrylic-polyurethane coatings consisted of three kinds of coatings: base coat (acrylic), intermediate (polyurethane) and top coat (acrylic);each made up of two layers. Mean thickness of the coating system was equal (145 ± 1) μm. In time of accelerated UV ageing, electromagnetic radiation was emitted of wave length in the range (300 - 400) nm which was progressively inducing a destruction of coatings chemical structure, especially photooxidation and photolysis of coating material. Carried out X-ray investigations revealed increased contents of oxygen in aged coatings due to their photooxidation which resulted in increased tendency of coating microfragments to chip off from surface layer with the ageing time flow. The hardness increase of UV aged coatings was also observed which intensified their surface layer brittleness. This contributed to their thickness decrease by more than 10% after 2016 h of ageing. Photodestruction of UV aged coatings was documented as well by characteristics obtained during investigations carried out with DMA method use. A noticeable physical destruction of the coatings was observed in the form of silver cracks, etchings and grooves in surface layer as well as craters extending also into interlayer. Processes of physical and chemical destruction undergoing in aged coatings influenced roughness profile change and coatings surface topography shaping. After 2016 h of UV ageing, the roughness parameters (Ra, Rz, Rt) increased several times. Long-lasting UV radiation influence on the surface of investigated acrylic-polyurethane coating systems contributed to their decorativeness loss. Microscopic examinations revealed colour change (yellowing) of blue pigment contained in polyurethane interlayer. Decline in coating gloss was also observed as the result of surface roughness increase.
