Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication,...Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.展开更多
Aramid papers (AP), made of aramid fibers, demonstrate superiority in electrical insulation applications. Unfortunately, the strength and electrical insulating properties of AP remain suboptimal, primarily due to the ...Aramid papers (AP), made of aramid fibers, demonstrate superiority in electrical insulation applications. Unfortunately, the strength and electrical insulating properties of AP remain suboptimal, primarily due to the smooth surface and chemical inertness of aramid fibers. Herein, AP are modified via the nacre-mimetic structure composed of aramid nanofibers (ANF) and carbonylated basalt nanosheets (CBSNs). This is achieved by impregnating AP into an ANF-CBSNs (A-C) suspension containing a 3D ANF framework as the matrix and 2D CBSNs as fillers. The resultant biomimetic composite papers (AP/A-C composite papers) exhibit a layered “brick-and-mortar” structure, demonstrating superior mechanical and electrical insulating properties. Notably, the tensile strength and breakdown strength of AP/A-C5 composite papers reach 39.69 MPa and 22.04 kV mm^(−1), respectively, representing a 155 % and 85 % increase compared to those of the control AP. These impressive properties are accompanied with excellent volume resistivity, exceptional dielectric properties, impressive folding endurance, outstanding heat insulation, and remarkable flame retardance. The nacre-inspired strategy offers an effective approach for producing highly promising electrical insulating papers for advanced electrical equipment.展开更多
This study introduces a cut-to-fit methodology for customizing bulk aramid aerogels into form factors suitable for wearable energy storage.Owing to strong intercomponent bonds within aramid-based building blocks,it is...This study introduces a cut-to-fit methodology for customizing bulk aramid aerogels into form factors suitable for wearable energy storage.Owing to strong intercomponent bonds within aramid-based building blocks,it is possible to delaminate layered bulk aerogel into flexible and thinner sheets,enabling efficient mass production.This process allows for precise customization of aerogel dimensions,shape,and elasticity,ensuring high resilience to deformation along with excellent thermal and impact resistance.Incorporation of conductive carbon nanotubes on the surface significantly enhances electrical conductivity and multi-catalytic activity while retaining the inherent advantages of aramids.These advancements facilitate the use of flexible and conductive electrodes as air cathodes in solid-state zinc–air batteries(ZABs),which demonstrate superior cyclic performance and lifecycles exceeding 160 h.Furthermore,aramid-based packaging provides superior protection for pouch-type ZABs,ensuring a consistent power supply even in severe conditions.These batteries are capable of withstanding structural deformations and absorbing physical and thermal shocks,such as impacts and exposure to fire.Moreover,the innovative reassembly of custom-cut single-pouch cells into battery modules allows for enhanced power output,tailored to wearable applications.This highlights the potential of the technology for a wide array of wearable devices requiring dependable energy sources in demanding environments.展开更多
Nanofiber carbon aerogels with 3D interconnected microfibrillar networks exhibit fascinating physical properties and present great application potential.However,it is still a challenge to fabricate superelastic nanofi...Nanofiber carbon aerogels with 3D interconnected microfibrillar networks exhibit fascinating physical properties and present great application potential.However,it is still a challenge to fabricate superelastic nanofiber carbon aerogels owing to their extremely dilute brittle interconnections and poor fiber toughness after carbonization.Herein,aramid nanofibers(ANF)/nanocellulose(CNF)dual-fibrous carbon aerogels are prepared,which exhibited supercompressibility and superelasticity due to the"skeleton-binder"synergistic effect of ANF and CNF and the design of in-plane micro-wrinkle honeycomb structure.The"skeleton-binder"synergistic effect improves interfacial interactions of nanofibers and optimizes the stress distribution of carbon aerogel.The highly ordered honeycomb structure with in-plane microwrinkles,formed by the bidirectional freezing and the difference in volume shrinkage during the carbonization between CNFs and ANFs,endows the CNF/ANF carbon aerogel with negative Poisson's ratio and high energy absorption capacity.These strategies significantly improve the overall mechanical properties of ANF/CNF carbon aerogel including the elasticity and fatigue resistance.As a result,the ultralight carbon aerogel(3.46 mg/cm^(3))exhibits excellent supercompression(undergoing an extreme strain of 95%)and elasticity(a stress retention up to 81.38% at 90% strain with 500 cycles and 96.15% at 50%strain with 10,000 cycles).The nanofiber carbon aerogel shows excellent multifunctional properties in flexible piezoresistive sensor and anisotropic thermal insulation materials,including a desirable sensitivity(as high as 48.74 kPa^(-1))and an instant response time(~40 ms),an anisotropy factor of 3.69 and an ultralow radial thermal conductivity(0.012 W m^(-1) K^(-1)).These properties make dual-fibrous carbon aerogels highly attractive in pressure sensors and thermal management applications.展开更多
Although lightweight aramid paper honeycombs are highly desirable for microwave absorption owing to their dual functions of both load-bearing and microwave-absorbing,unsatisfactory microwave absorption,inferior mechan...Although lightweight aramid paper honeycombs are highly desirable for microwave absorption owing to their dual functions of both load-bearing and microwave-absorbing,unsatisfactory microwave absorption,inferior mechanical and inadequate thermal properties present significant challenges for practical applications in diverse complex scenarios.Herein,lightweight,high-strength and flame-retardant aramid nanofibers-based honeycombs(MANHs)for integrated microwave absorption and thermal insulation are successfully fabricated via the hydrogen bonding assembly,mold forming and aerogel filling strategy using aramid waste as raw material.The dense network structure formed by the interwoven aramid nanofibers(ANFs)in the honeycomb body acts as a framework endows the MANH with impressive mechanical performance,and the specific strength and toughness of MANH reach 153.6 MPa g^(−1) cm^(−3) and 13.9 MJ m^(−3),respectively,which are 3.5 and 19 times higher than those of commercial microwave absorption honeycombs(CMAH).The ultralight MXene/ANFs aerogels(a density of 25 mg cm^(−3))with multiscale pore structure filled in the honeycomb apertures give the honeycomb outstanding microwave absorption performance,with a minimum reflection loss of−62.5 dB,and can cover the entire X-band with a thickness of only 3.5 mm.Meanwhile,compared with CMAH,the thermal insulation and flame-retardant performance of MANH are also significantly improved.Notably,MANH also demonstrates favorable sound absorption performance at high-frequency bands.The MANH is considered to be a promising candidate for aerospace and military stealth applications as a result of its lightweight,high strength,exceptional microwave absorption,and remarkable thermal insulation performance.展开更多
In recent years,polymer-based triboelectric nanogenerators(TENGs)have been increasingly applied in the field of flexible wearable electronics.However,the lack of flame retardancy of existing TENGs greatly lim-its thei...In recent years,polymer-based triboelectric nanogenerators(TENGs)have been increasingly applied in the field of flexible wearable electronics.However,the lack of flame retardancy of existing TENGs greatly lim-its their applications in extreme circumstances.Herein,an ultra-thin and highly flexible aramid nanofiber(ANF)/MXene(Ti_(3)C_(2)T_(x))/Ni nanochain composite paper was prepared through vacuum-assisted filtration and freeze-drying technology.Owing to the synergistic effect between ANF and MXene,the composite paper not only possessed excellent mechanical properties,which were able to withstand over 10,000 times its own weight,but also exhibited outstanding flame-retardant and controllable Joule heating ca-pabilities.Moreover,the mechanical energy capture characteristics of the composite paper-based TENG were evaluated,resulting in the open-circuit voltage(55.6 V),short-circuit current(0.62μA),and trans-ferred charge quantity(25μC).It also could enable self-powering as a wearable electronic device with an instantaneous power of 15.6μW at the optimal external resistance of 10 MΩ.This work is intended to set TENG as safe energy harvesting devices for reducing fire hazards,and will provide a new strategy to broaden the application ranges of TENG.展开更多
The application of aramid fiber(AF)/polyetheretherketone(PEEK)composites is currently hindered by the inert surface and poor wettability of AF,resulting in weak interfacial adhesion and poor mechani-cal properties.Sur...The application of aramid fiber(AF)/polyetheretherketone(PEEK)composites is currently hindered by the inert surface and poor wettability of AF,resulting in weak interfacial adhesion and poor mechani-cal properties.Surface coating and the introduction of nanostructures have been proven to be effective approaches to address this problem.Herein,a simple hybrid sizing agent has been developed to modify the AF surface,consisting of soluble polyimide(PI)as a compatibilizer,carboxyl-functionalized carbon nanotubes(CNT-COOH)as a rigid unit,and aramid nanofibers(ANF)as a flexible component.The syner-getic effects of PI and the multiscale flexible-rigid structure(CNT-COOH/ANF)contribute to the formation of chemical and physical bonds between AF and PEEK matrix,further improving the interfacial adhesion and stress transfer efficiency.Attributed to the enhanced wettability and roughness of AF,compared with unsized AF,the flexural strength(220.97 MPa),modulus(13.26 GPa),ILSS(13.36 MPa),and storage modu-lus(12.93 GPa)of the AF/PEEK composite increase by 132.60%,99.00%,18.97%,and 82.70%respectively.Additionally,the flexible-rigid nanonetwork facilitates the penetration of the PEEK resin into pore spaces.This simple and effective approach exhibits promising potential in enhancing the interfacial bonding of AF/PEEK composites.展开更多
Although electrically conductive and hydrophilic MXene sheets are promising for multifunctional fibers and electronic textiles,it is still a challenge to simultaneously enhance both conductivity and mechanical propert...Although electrically conductive and hydrophilic MXene sheets are promising for multifunctional fibers and electronic textiles,it is still a challenge to simultaneously enhance both conductivity and mechanical properties of MXene fibers because of the high rigidity of MXene sheets and insufficient inter-sheet interactions.Herein,we demonstrate a core-shell wet-spinning methodology for fabricating highly conductive,super-tough,ultra-strong,and environmentally stable Ti_(3)C_(2)T_(x) MXene-based core-shell fibers with conductive MXene cores and tough aramid nanofiber(ANF)shells.The highly orientated and low-defect structure endows the ANF@MXene core-shell fiber with supertoughness of~48.1 MJ m^(-3),high strength of~502.9 MPa,and high conductivity of~3.0×10^(5)S m^(-1).The super-tough and conductive ANF@MXene fibers can be woven into textiles,exhibiting an excellent electromagnetic interference(EMI)shielding efficiency of 83.4 dB at a small thickness of 213μm.Importantly,the protection of the ANF shells provides the fibers with satisfactory cyclic stability under dynamic stretching and bending,and excellent resistance to acid,alkali,seawater,cryogenic and high temperatures,and fire.The oxidation resistance of the fibers is demonstrated by their wellmaintained EMI shielding performances.The multifunctional core-shell fibers would be highly promising in the fields of EMI shielding textiles,wearable electronics and aerospace.展开更多
High-performance ballistic fibers,such as aramid fiber and ultra-high-molecular-weight polyethylene(UHMWPE),are commonly used in anti-ballistic structures due to their low density,high tensile strength and high specif...High-performance ballistic fibers,such as aramid fiber and ultra-high-molecular-weight polyethylene(UHMWPE),are commonly used in anti-ballistic structures due to their low density,high tensile strength and high specific modulus.However,their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure.In contrast,carbon fiber reinforced epoxy resin matrix composites(CFRP)have the characteristics of high modulus in the thickness direction and high shear resistance.However,carbon fibers are rarely used and applied for protection purposes.A hybridization with aramid fiber reinforced epoxy resin matrix composites(AFRP)and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites.The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated.Through conducting mechanical property tests and ballistic tests,two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software,respectively.The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced.The ballistic tests'results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7%of AFRP.When CFRP was on the striking face,the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage.The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process.These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt%and 30 wt%.展开更多
Dynamic tensile impact properties of aramid (Technora) and UHMWPE (DC851) fiber bundles were studied at two high strain rates by means of reflecting type Split Hopkinson Bar, and stress-strain curves of fiber yarns ...Dynamic tensile impact properties of aramid (Technora) and UHMWPE (DC851) fiber bundles were studied at two high strain rates by means of reflecting type Split Hopkinson Bar, and stress-strain curves of fiber yarns at different strain rates were obtained. Experimental results show that the initial elastic modulus, failure strength and unstable strain of aramid fiber yarns are strain rate insensitive, whereas the initial elastic modulus and unstable strain of UHMWPE fiber yarns are strain rate sensitive. A fiber-bundle statistical constitutive equation was used to describe the tensile behavior of aramid and UHMWPE fiber bundles at high strain rates. The good consistency between the simulated results and experimental data indicates that the modified double Weibull function can represent the tensile strength distribution of aramid and UHMWPE fibers and the method of extracting Weibull parameters from fiber bundles stress-strain data is valid.展开更多
An efficient method was proposed to prepare high-performance conductive AramidCarbon Blend Fabrics(ACBF)with cobalt-nickel(Co-Ni)alloy coatings,which is conducive to industrial production.The grid-like substrate compo...An efficient method was proposed to prepare high-performance conductive AramidCarbon Blend Fabrics(ACBF)with cobalt-nickel(Co-Ni)alloy coatings,which is conducive to industrial production.The grid-like substrate composed of aramid and carbon fibers was innovatively used in flexible Electromagnetic Interference(EMI)shielding materials.The natural network structure is advantageous to the uniform deposition of metal particles to the establishment of conductive pathways subsequently in order to improve conductivity.The induction of a synergistic effect from Electromagnetic(EM)wave-reflection and EM wave-absorption through the whole carbonCo-Ni-ternary system notably enhanced the EMI Shielding Effectiveness(SE)value to an average of 42.57 d B in the range of 30-6000 MHz.On the other hand,together with the inherent toughness of the alloy coatings,the tensile strength of the aramid fibers used for bulletproof made a significant contribution to the desired mechanical properties.The light weight of the resultant composite made it applicable to aerospace vehicles simultaneously.X-ray Photoelectron Spectroscopy(XPS)was conducted to investigate the variations of elements and groups on the sample surface in pretreating process.The elemental components and surface morphologies of fabric samples during different stages of the process were investigated by Scanning Electron Microscope(SEM)and Energy Dispersive spectrometer(EDX)measurements.X-Ray Diffraction(XRD)results indicated that the obtained Co-Ni alloy coating had a combined Hexagonal Closed-Packed(HCP)and FacedCentered Cubic(FCC)crystalline phase.The relatively high corrosion resistance demonstrated in different acid and alkaline conditions was instrumental in more complex environments as well.展开更多
This work described the preparation of easily colored meta-aramid(PMIA) copolymers from m-phenylenediamine(MPD),isophthaloyl dichloride(IPC), and 3,4′-oxydianiline(3,4′-ODA) via solution polycondensation in N,N-dime...This work described the preparation of easily colored meta-aramid(PMIA) copolymers from m-phenylenediamine(MPD),isophthaloyl dichloride(IPC), and 3,4′-oxydianiline(3,4′-ODA) via solution polycondensation in N,N-dimethylacetamide(DMAc). The novel co-PMIAs were obtained in relatively high inherent viscosities ranging from 1.32 dL/g to 2.53 dL/g, which could be easily cast into flexible films with high transparence or spun into fibers. All the newly synthesized copolymers possessed excellent thermal stabilities even better than that of commercial PMIA, with 5% weight loss temperatures higher than 430 °C in nitrogen measured by TGA and glass transition temperature of 267–277 °C measured by DSC. The cast films exhibited good mechanical properties with a tensile strength up to107 MPa and a tensile modulus up to 2.2 GPa. The resultant PMIAs also showed good solubility and better dye ability for cationic dyes.展开更多
Flexible yet highly thermoconductive materials are essential for the development of next-generation flexible electronic devices.Herein,we report a bioinspired nanostructured film with the integration of large ductilit...Flexible yet highly thermoconductive materials are essential for the development of next-generation flexible electronic devices.Herein,we report a bioinspired nanostructured film with the integration of large ductility and high thermal conductivity based on self-exfoliated pristine graphene and three-dimensional aramid nanofiber network.A self-grinding strategy to directly exfoliate flake graphite into few-layer and few-defect pristine graphene is successfully developed through mutual shear friction between graphite particles,generating largely enhanced yield and productivity in comparison to normal liquid-based exfoliation strategies,such as ultrasonication,high-shear mixing and ball milling.Inspired by nacre,a new bioinspired layered structural design model containing three-dimensional nanofiber network is proposed and implemented with an interconnected aramid nanofiber network and high-loading graphene nanosheets by a developed continuous assembly strategy of sol-gel-film transformation.It is revealed that the bioinspired film not only exhibits nacre-like ductile deformation behavior by releasing the hidden length of curved aramid nanofibers,but also possesses good thermal transport ability by directionally conducting heat along pristine graphene nanosheets.展开更多
The aramid fiber礥HMWPE (ultrahigh molecular weight polyethylene) fiber hybrid composites (AF礑F) were ma-nufactured. By Charpy impact, the low velocity impact behavior of AF礑F composite was studied. And the high vel...The aramid fiber礥HMWPE (ultrahigh molecular weight polyethylene) fiber hybrid composites (AF礑F) were ma-nufactured. By Charpy impact, the low velocity impact behavior of AF礑F composite was studied. And the high velocity impact behavior under ballistic impact was also investigated. The influence of hybrid ratio on the performances of low and high velocity impact was analyzed, and hybrid structures with good impact properties under low velocity impact and high velocity were optimized. For Charpy impact, the maximal impact load increased with the accretion of the AF layers for AF礑F hybrid composites. The total impact power was reduced with the decrease of DF layers and the delamination can result in the increase of total impact power. For ballistic impact, the DF ballistic performance was better than that of the AF and the hybrid ratio had a crucial influence. The failure morphology of AF礑F hybrid composite under Charpy impact and ballistic impact was analyzed. The AF礑F hybrid composites in suitable hybrid ratio could attain better performance than AF or DF composites.展开更多
Compressive strengths and elastic moduli of Carbon Fiber Reinforced Polymer(CFRP)composites can be noticeably improved by multiple ultra-thin interlays with non-woven Aramid Pulp(AP)micro/nano-fibers.10-ply CFRP speci...Compressive strengths and elastic moduli of Carbon Fiber Reinforced Polymer(CFRP)composites can be noticeably improved by multiple ultra-thin interlays with non-woven Aramid Pulp(AP)micro/nano-fibers.10-ply CFRP specimens with 0,2,4,6,8 g/m^(2)AP were tested under uniaxial compression.Those flexible AP fibers,filling the resin-rich regions and further constructing the fiber bridging at the ply interfaces,can effectively suppress delamination growth and lead to very good improvements both in the compressive strength and the elastic modulus.The CFRP specimen with an optimum interlay thickness has a distinct shear failure mode instead of the typical delamination cracking along the direction of continuous carbon fibers.Compressive Strengths After Impacts(CAI)of 12.35 J were also measured,up to 90%improvement in CAI has been observed.It is concluded those ultra-thin interlays of non-woven AP micro/nano-fibers are beneficial to design and manufacture“high strength”CFRP composites.展开更多
Basalt Fiber Reinforced Polymer(BFRP)composites have huge potential application respects for some civil fields due to enough strength/modulus to weight and low cost by replacing carbon fiber composites.Aiming at the i...Basalt Fiber Reinforced Polymer(BFRP)composites have huge potential application respects for some civil fields due to enough strength/modulus to weight and low cost by replacing carbon fiber composites.Aiming at the issues in the Resin-Rich Region(RRR)and Interfacial Transition Region(ITR)of fiber reinforced polymer composites,the characteristic Aramid Pulp(AP)fibers with micro-fiber trunk and nano-fiber branches were manufactured into multiple non-woven ultra-thin interleaving at the interlayers of BFRP composites via compression molding to reinforce the flexural strengths and elastic moduli.AP fibers were introduced into RRR to form interleaving at the interlayer,the brittle epoxy adhesive layer was improved and enabled to avoid cracking under a low external load.Free fiber branches of AP were also embedded into BF layer to construct quasi-vertical fiber bridging behaviors in ITR,stronger mechanical interlocking was created to prevent crack propagation along the bonding interface of BF/epoxy.Three-point bending testing results showed the interleaving film with 4 g/m^(2)AP exhibited the best effect among various areal densities and yielded average 315.75 MPa in flexural strength and 21.38 GPa in elastic modulus,having a 63.4%increment and a 47.1%increment respectively compared with the bases.Overall,the simple and low-cost AP interleaving is confirmed as an effective method in improving interlayer structure and flexural performance of BFRP composites,which may be considered to manufacture high-performance laminated fiber reinforced polymer composites in civil aviation industry.展开更多
The aramid fiber-reinforced composites(AFRC)can increase the durability of corresponding applications such as aerospace,automobile and other large structural parts,due to the improvement in hardness,heat build-up,wear...The aramid fiber-reinforced composites(AFRC)can increase the durability of corresponding applications such as aerospace,automobile and other large structural parts,due to the improvement in hardness,heat build-up,wear properties and green environmental protection.However,because of its complex multiphase structure and unique heterogeneity and anisotropy,the poor compression fatigue resistance and the incident surface fibrillation are inevitable.To improve the assembly precision of AFRC,mechanical processing is necessary to meet the dimensional accuracy.This paper focuses on the influence of contour milling parameters on delamination defects during milling of AFRC laminates.A series of milling experiments are conducted and two different kinds of delamination defects including tearing delamination and uncut-off delamination are investigated.A computing method and model based on brittle fracture for the two different types of delamination are established.The results can be used for explaining the mechanism and regularity of delamination defects.The control strategy of delamination defects and evaluation method of finished surface integrity are further discussed.The results are meaningful to optimize cutting parameters,and provide a clear understanding of surface defects control.展开更多
Electronic devices have become ubiquitous in our daily lives,leading to a surge in the use of microwave absorbers and wearable sensor devices across various sectors.A prime example of this trend is the aramid nanofibe...Electronic devices have become ubiquitous in our daily lives,leading to a surge in the use of microwave absorbers and wearable sensor devices across various sectors.A prime example of this trend is the aramid nanofibers/polypyrrole/nickel(APN)aerogels,which serve dual roles as both microwave absorbers and pressure sensors.In this work,we focused on the preparation of aramid nanofibers/polypyrrole(AP15)aerogels,where the mass ratio of aramid nanofibers to pyrrole was 1:5.We employed the oxidative polymerization method for the preparation process.Following this,nickel was thermally evaporated onto the surface of the AP15 aerogels,resulting in the creation of an ultralight(9.35 mg·cm^(-3)).This aerogel exhibited a porous structure.The introduction of nickel into the aerogel aimed to enhance magnetic loss and adjust impedance matching,thereby improving electromagnetic wave absorption performance.The minimum reflection loss value achieved was-48.7 dB,and the maximum effective absorption bandwidth spanned 8.42 GHz with a thickness of 2.9 mm.These impressive metrics can be attributed to the three-dimensional network porous structure of the aerogel and perfect impedance matching.Moreover,the use of aramid nanofibers and a three-dimensional hole structure endowed the APN aerogels with good insulation,flame-retardant properties,and compression resilience.Even under a compression strain of 50%,the aerogel maintained its resilience over 500 cycles.The incorporation of polypyrrole and nickel particles further enhanced the conductivity of the aerogel.Consequently,the final APN aerogel sensor demonstrated high sensitivity(10.78 kPa-1)and thermal stability.In conclusion,the APN aerogels hold significant promise as ultra-broadband microwave absorbers and pressure sensors.展开更多
Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally...Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally friendly C6 from a perfluoralkyl methlacrylate copolymer emulsion,AG-E081,was performed and a durable omniphobic fabric was achieved.C6 is an ecological alternative to C8(eight CF2 groups)fluorinated compounds,and it was thereafter successfully incorporated into aramid fabric to achieve a durable superomniphobic surface.The fabric became water and oil repellent with an extremely high water contact angle of 180°.As tested by the water spray AATCC test and hydrocarbon resistance test,the as-prepared fabric gained 100°(ISO 5)and grade number 4 respectively.Furthermore,the fabrics also showed significantly improved washing durability after ten washing cycles.By scanning electron microscopy(SEM),Fourier-transform infrared spectroscopy(FTIR)and x-ray photoelectron spectroscopy(XPS)tests,it is indicated that the durable superomniphobicity can be attributed to the roughness and activation of the aramid surface by the plasma pre-treatment,which induces more adsorption and chemical graft of the C6 copolymer.展开更多
In this paper, a long line-shape dielectric barrier discharge excited by a nanosecond pulse and AC is generated in atmospheric air for the purpose of discussing the uniformity, stability and ability of aramid fiber tr...In this paper, a long line-shape dielectric barrier discharge excited by a nanosecond pulse and AC is generated in atmospheric air for the purpose of discussing the uniformity, stability and ability of aramid fiber treatment. The discharge images, waveforms of current and voltage,optical emission spectra, and gas temperatures of both discharges are compared. It is found that nanosecond pulsed discharge has a more uniform discharge morphology, higher energy efficiency and lower gas temperature, which indicates that nanosecond pulsed discharge is more suitable for surface modification. To reduce the water contact angle from 96° to about 60°, the energy cost is only about 1/7 compared with AC discharge. Scanning electron microscopy,Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy are employed to understand the mechanisms of hydrophilicity improvement.展开更多
基金supported by the Fundamental Research Funds for the Central Universities and Heilongjiang Provincial Natural Science Foundation of China(Grant No.YQ2020E009).
文摘Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.
基金supported by the National Natural Science Foundation of China(No.22278260)the Open Foundation of Key Laboratory of Auxiliary Chemistry and Technology for Chemical Industry(No.KFKT2021-14)Shaanxi Collaborative Innovation Center of Industrial Auxiliary Chemistry and Technology(No.KFKT2021-14).
文摘Aramid papers (AP), made of aramid fibers, demonstrate superiority in electrical insulation applications. Unfortunately, the strength and electrical insulating properties of AP remain suboptimal, primarily due to the smooth surface and chemical inertness of aramid fibers. Herein, AP are modified via the nacre-mimetic structure composed of aramid nanofibers (ANF) and carbonylated basalt nanosheets (CBSNs). This is achieved by impregnating AP into an ANF-CBSNs (A-C) suspension containing a 3D ANF framework as the matrix and 2D CBSNs as fillers. The resultant biomimetic composite papers (AP/A-C composite papers) exhibit a layered “brick-and-mortar” structure, demonstrating superior mechanical and electrical insulating properties. Notably, the tensile strength and breakdown strength of AP/A-C5 composite papers reach 39.69 MPa and 22.04 kV mm^(−1), respectively, representing a 155 % and 85 % increase compared to those of the control AP. These impressive properties are accompanied with excellent volume resistivity, exceptional dielectric properties, impressive folding endurance, outstanding heat insulation, and remarkable flame retardance. The nacre-inspired strategy offers an effective approach for producing highly promising electrical insulating papers for advanced electrical equipment.
基金supported by‘Regional Innovation Strategy(RIS)’through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(MOE)(2021RIS-002)supported by NRF grant funded by Ministry of Science,ICT and Future Planning(No.NRF-2018R1C1B6005009,NRF-2021R1C1C1012676,and 2009-0082580).
文摘This study introduces a cut-to-fit methodology for customizing bulk aramid aerogels into form factors suitable for wearable energy storage.Owing to strong intercomponent bonds within aramid-based building blocks,it is possible to delaminate layered bulk aerogel into flexible and thinner sheets,enabling efficient mass production.This process allows for precise customization of aerogel dimensions,shape,and elasticity,ensuring high resilience to deformation along with excellent thermal and impact resistance.Incorporation of conductive carbon nanotubes on the surface significantly enhances electrical conductivity and multi-catalytic activity while retaining the inherent advantages of aramids.These advancements facilitate the use of flexible and conductive electrodes as air cathodes in solid-state zinc–air batteries(ZABs),which demonstrate superior cyclic performance and lifecycles exceeding 160 h.Furthermore,aramid-based packaging provides superior protection for pouch-type ZABs,ensuring a consistent power supply even in severe conditions.These batteries are capable of withstanding structural deformations and absorbing physical and thermal shocks,such as impacts and exposure to fire.Moreover,the innovative reassembly of custom-cut single-pouch cells into battery modules allows for enhanced power output,tailored to wearable applications.This highlights the potential of the technology for a wide array of wearable devices requiring dependable energy sources in demanding environments.
文摘Nanofiber carbon aerogels with 3D interconnected microfibrillar networks exhibit fascinating physical properties and present great application potential.However,it is still a challenge to fabricate superelastic nanofiber carbon aerogels owing to their extremely dilute brittle interconnections and poor fiber toughness after carbonization.Herein,aramid nanofibers(ANF)/nanocellulose(CNF)dual-fibrous carbon aerogels are prepared,which exhibited supercompressibility and superelasticity due to the"skeleton-binder"synergistic effect of ANF and CNF and the design of in-plane micro-wrinkle honeycomb structure.The"skeleton-binder"synergistic effect improves interfacial interactions of nanofibers and optimizes the stress distribution of carbon aerogel.The highly ordered honeycomb structure with in-plane microwrinkles,formed by the bidirectional freezing and the difference in volume shrinkage during the carbonization between CNFs and ANFs,endows the CNF/ANF carbon aerogel with negative Poisson's ratio and high energy absorption capacity.These strategies significantly improve the overall mechanical properties of ANF/CNF carbon aerogel including the elasticity and fatigue resistance.As a result,the ultralight carbon aerogel(3.46 mg/cm^(3))exhibits excellent supercompression(undergoing an extreme strain of 95%)and elasticity(a stress retention up to 81.38% at 90% strain with 500 cycles and 96.15% at 50%strain with 10,000 cycles).The nanofiber carbon aerogel shows excellent multifunctional properties in flexible piezoresistive sensor and anisotropic thermal insulation materials,including a desirable sensitivity(as high as 48.74 kPa^(-1))and an instant response time(~40 ms),an anisotropy factor of 3.69 and an ultralow radial thermal conductivity(0.012 W m^(-1) K^(-1)).These properties make dual-fibrous carbon aerogels highly attractive in pressure sensors and thermal management applications.
基金supported by the Key Research and Development Project of Shaanxi Province(No.2024GX-YBXM-331)the Scientific Research Plan Projects of Shaanxi Education Department(Program No.24JC009)the National Natural Science Foundation of China(No.22278260).
文摘Although lightweight aramid paper honeycombs are highly desirable for microwave absorption owing to their dual functions of both load-bearing and microwave-absorbing,unsatisfactory microwave absorption,inferior mechanical and inadequate thermal properties present significant challenges for practical applications in diverse complex scenarios.Herein,lightweight,high-strength and flame-retardant aramid nanofibers-based honeycombs(MANHs)for integrated microwave absorption and thermal insulation are successfully fabricated via the hydrogen bonding assembly,mold forming and aerogel filling strategy using aramid waste as raw material.The dense network structure formed by the interwoven aramid nanofibers(ANFs)in the honeycomb body acts as a framework endows the MANH with impressive mechanical performance,and the specific strength and toughness of MANH reach 153.6 MPa g^(−1) cm^(−3) and 13.9 MJ m^(−3),respectively,which are 3.5 and 19 times higher than those of commercial microwave absorption honeycombs(CMAH).The ultralight MXene/ANFs aerogels(a density of 25 mg cm^(−3))with multiscale pore structure filled in the honeycomb apertures give the honeycomb outstanding microwave absorption performance,with a minimum reflection loss of−62.5 dB,and can cover the entire X-band with a thickness of only 3.5 mm.Meanwhile,compared with CMAH,the thermal insulation and flame-retardant performance of MANH are also significantly improved.Notably,MANH also demonstrates favorable sound absorption performance at high-frequency bands.The MANH is considered to be a promising candidate for aerospace and military stealth applications as a result of its lightweight,high strength,exceptional microwave absorption,and remarkable thermal insulation performance.
基金financially supported by the Zhejiang Provin-cial Natural Science Foundation of China(No.LQ22E030016)the National Natural Science Foundation of China(Nos.52275137,51705467),the China Postdoctoral Science Foundation(No.2022M722831)+2 种基金the Postdoctoral Research Selected Funding Project of Zhejiang Province(No.ZJ2022063)the Self-Topic Fund of Zhe-jiang Normal University(No.2020ZS04)the National Key Re-search and Development Program of China(No.2018YFE0199100).
文摘In recent years,polymer-based triboelectric nanogenerators(TENGs)have been increasingly applied in the field of flexible wearable electronics.However,the lack of flame retardancy of existing TENGs greatly lim-its their applications in extreme circumstances.Herein,an ultra-thin and highly flexible aramid nanofiber(ANF)/MXene(Ti_(3)C_(2)T_(x))/Ni nanochain composite paper was prepared through vacuum-assisted filtration and freeze-drying technology.Owing to the synergistic effect between ANF and MXene,the composite paper not only possessed excellent mechanical properties,which were able to withstand over 10,000 times its own weight,but also exhibited outstanding flame-retardant and controllable Joule heating ca-pabilities.Moreover,the mechanical energy capture characteristics of the composite paper-based TENG were evaluated,resulting in the open-circuit voltage(55.6 V),short-circuit current(0.62μA),and trans-ferred charge quantity(25μC).It also could enable self-powering as a wearable electronic device with an instantaneous power of 15.6μW at the optimal external resistance of 10 MΩ.This work is intended to set TENG as safe energy harvesting devices for reducing fire hazards,and will provide a new strategy to broaden the application ranges of TENG.
文摘The application of aramid fiber(AF)/polyetheretherketone(PEEK)composites is currently hindered by the inert surface and poor wettability of AF,resulting in weak interfacial adhesion and poor mechani-cal properties.Surface coating and the introduction of nanostructures have been proven to be effective approaches to address this problem.Herein,a simple hybrid sizing agent has been developed to modify the AF surface,consisting of soluble polyimide(PI)as a compatibilizer,carboxyl-functionalized carbon nanotubes(CNT-COOH)as a rigid unit,and aramid nanofibers(ANF)as a flexible component.The syner-getic effects of PI and the multiscale flexible-rigid structure(CNT-COOH/ANF)contribute to the formation of chemical and physical bonds between AF and PEEK matrix,further improving the interfacial adhesion and stress transfer efficiency.Attributed to the enhanced wettability and roughness of AF,compared with unsized AF,the flexural strength(220.97 MPa),modulus(13.26 GPa),ILSS(13.36 MPa),and storage modu-lus(12.93 GPa)of the AF/PEEK composite increase by 132.60%,99.00%,18.97%,and 82.70%respectively.Additionally,the flexible-rigid nanonetwork facilitates the penetration of the PEEK resin into pore spaces.This simple and effective approach exhibits promising potential in enhancing the interfacial bonding of AF/PEEK composites.
基金Financial support from the National Natural Science Foundation of China(51922020,52090034)the Fundamental Research Funds for the Central Universities(BHYC1707B,XK1802-2)。
文摘Although electrically conductive and hydrophilic MXene sheets are promising for multifunctional fibers and electronic textiles,it is still a challenge to simultaneously enhance both conductivity and mechanical properties of MXene fibers because of the high rigidity of MXene sheets and insufficient inter-sheet interactions.Herein,we demonstrate a core-shell wet-spinning methodology for fabricating highly conductive,super-tough,ultra-strong,and environmentally stable Ti_(3)C_(2)T_(x) MXene-based core-shell fibers with conductive MXene cores and tough aramid nanofiber(ANF)shells.The highly orientated and low-defect structure endows the ANF@MXene core-shell fiber with supertoughness of~48.1 MJ m^(-3),high strength of~502.9 MPa,and high conductivity of~3.0×10^(5)S m^(-1).The super-tough and conductive ANF@MXene fibers can be woven into textiles,exhibiting an excellent electromagnetic interference(EMI)shielding efficiency of 83.4 dB at a small thickness of 213μm.Importantly,the protection of the ANF shells provides the fibers with satisfactory cyclic stability under dynamic stretching and bending,and excellent resistance to acid,alkali,seawater,cryogenic and high temperatures,and fire.The oxidation resistance of the fibers is demonstrated by their wellmaintained EMI shielding performances.The multifunctional core-shell fibers would be highly promising in the fields of EMI shielding textiles,wearable electronics and aerospace.
文摘High-performance ballistic fibers,such as aramid fiber and ultra-high-molecular-weight polyethylene(UHMWPE),are commonly used in anti-ballistic structures due to their low density,high tensile strength and high specific modulus.However,their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure.In contrast,carbon fiber reinforced epoxy resin matrix composites(CFRP)have the characteristics of high modulus in the thickness direction and high shear resistance.However,carbon fibers are rarely used and applied for protection purposes.A hybridization with aramid fiber reinforced epoxy resin matrix composites(AFRP)and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites.The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated.Through conducting mechanical property tests and ballistic tests,two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software,respectively.The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced.The ballistic tests'results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7%of AFRP.When CFRP was on the striking face,the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage.The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process.These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt%and 30 wt%.
文摘Dynamic tensile impact properties of aramid (Technora) and UHMWPE (DC851) fiber bundles were studied at two high strain rates by means of reflecting type Split Hopkinson Bar, and stress-strain curves of fiber yarns at different strain rates were obtained. Experimental results show that the initial elastic modulus, failure strength and unstable strain of aramid fiber yarns are strain rate insensitive, whereas the initial elastic modulus and unstable strain of UHMWPE fiber yarns are strain rate sensitive. A fiber-bundle statistical constitutive equation was used to describe the tensile behavior of aramid and UHMWPE fiber bundles at high strain rates. The good consistency between the simulated results and experimental data indicates that the modified double Weibull function can represent the tensile strength distribution of aramid and UHMWPE fibers and the method of extracting Weibull parameters from fiber bundles stress-strain data is valid.
基金supported by the National Natural Science Foundation of China(No.U1830108)the Shanghai Natural Science Foundation,China(No.20ZR1405000)+1 种基金the Innovation Foundation of Shanghai Aerospace Science and Technology,China(No.SAST2018-061)the Exploratory Research Project of“Yanchang Petroleum(Group)-Fudan University”,China。
文摘An efficient method was proposed to prepare high-performance conductive AramidCarbon Blend Fabrics(ACBF)with cobalt-nickel(Co-Ni)alloy coatings,which is conducive to industrial production.The grid-like substrate composed of aramid and carbon fibers was innovatively used in flexible Electromagnetic Interference(EMI)shielding materials.The natural network structure is advantageous to the uniform deposition of metal particles to the establishment of conductive pathways subsequently in order to improve conductivity.The induction of a synergistic effect from Electromagnetic(EM)wave-reflection and EM wave-absorption through the whole carbonCo-Ni-ternary system notably enhanced the EMI Shielding Effectiveness(SE)value to an average of 42.57 d B in the range of 30-6000 MHz.On the other hand,together with the inherent toughness of the alloy coatings,the tensile strength of the aramid fibers used for bulletproof made a significant contribution to the desired mechanical properties.The light weight of the resultant composite made it applicable to aerospace vehicles simultaneously.X-ray Photoelectron Spectroscopy(XPS)was conducted to investigate the variations of elements and groups on the sample surface in pretreating process.The elemental components and surface morphologies of fabric samples during different stages of the process were investigated by Scanning Electron Microscope(SEM)and Energy Dispersive spectrometer(EDX)measurements.X-Ray Diffraction(XRD)results indicated that the obtained Co-Ni alloy coating had a combined Hexagonal Closed-Packed(HCP)and FacedCentered Cubic(FCC)crystalline phase.The relatively high corrosion resistance demonstrated in different acid and alkaline conditions was instrumental in more complex environments as well.
基金financially supported by the National Natural Science Foundation of China(No.51473031)the Shanghai International S&T Cooperation Fund(No.16160731302)
文摘This work described the preparation of easily colored meta-aramid(PMIA) copolymers from m-phenylenediamine(MPD),isophthaloyl dichloride(IPC), and 3,4′-oxydianiline(3,4′-ODA) via solution polycondensation in N,N-dimethylacetamide(DMAc). The novel co-PMIAs were obtained in relatively high inherent viscosities ranging from 1.32 dL/g to 2.53 dL/g, which could be easily cast into flexible films with high transparence or spun into fibers. All the newly synthesized copolymers possessed excellent thermal stabilities even better than that of commercial PMIA, with 5% weight loss temperatures higher than 430 °C in nitrogen measured by TGA and glass transition temperature of 267–277 °C measured by DSC. The cast films exhibited good mechanical properties with a tensile strength up to107 MPa and a tensile modulus up to 2.2 GPa. The resultant PMIAs also showed good solubility and better dye ability for cationic dyes.
基金support from the National Natural Science Foundation of China(51973054)Young Talents Program in Hunan Province(2020RC3024)+2 种基金Natural Science Funds of Hunan Province for Distinguished Young Scholar(2021JJ10018)Science Research Project of Hunan Provincial Education Department(21B0027)High-level Innovative Talent Project in Hunan Province(2018RS3055).
文摘Flexible yet highly thermoconductive materials are essential for the development of next-generation flexible electronic devices.Herein,we report a bioinspired nanostructured film with the integration of large ductility and high thermal conductivity based on self-exfoliated pristine graphene and three-dimensional aramid nanofiber network.A self-grinding strategy to directly exfoliate flake graphite into few-layer and few-defect pristine graphene is successfully developed through mutual shear friction between graphite particles,generating largely enhanced yield and productivity in comparison to normal liquid-based exfoliation strategies,such as ultrasonication,high-shear mixing and ball milling.Inspired by nacre,a new bioinspired layered structural design model containing three-dimensional nanofiber network is proposed and implemented with an interconnected aramid nanofiber network and high-loading graphene nanosheets by a developed continuous assembly strategy of sol-gel-film transformation.It is revealed that the bioinspired film not only exhibits nacre-like ductile deformation behavior by releasing the hidden length of curved aramid nanofibers,but also possesses good thermal transport ability by directionally conducting heat along pristine graphene nanosheets.
文摘The aramid fiber礥HMWPE (ultrahigh molecular weight polyethylene) fiber hybrid composites (AF礑F) were ma-nufactured. By Charpy impact, the low velocity impact behavior of AF礑F composite was studied. And the high velocity impact behavior under ballistic impact was also investigated. The influence of hybrid ratio on the performances of low and high velocity impact was analyzed, and hybrid structures with good impact properties under low velocity impact and high velocity were optimized. For Charpy impact, the maximal impact load increased with the accretion of the AF layers for AF礑F hybrid composites. The total impact power was reduced with the decrease of DF layers and the delamination can result in the increase of total impact power. For ballistic impact, the DF ballistic performance was better than that of the AF and the hybrid ratio had a crucial influence. The failure morphology of AF礑F hybrid composite under Charpy impact and ballistic impact was analyzed. The AF礑F hybrid composites in suitable hybrid ratio could attain better performance than AF or DF composites.
基金the National Natural Science Foundation of China(No.52102115)the Fundamental Research Funds of Southwestern University of Science and Technology,China(No.20zx7141).
文摘Compressive strengths and elastic moduli of Carbon Fiber Reinforced Polymer(CFRP)composites can be noticeably improved by multiple ultra-thin interlays with non-woven Aramid Pulp(AP)micro/nano-fibers.10-ply CFRP specimens with 0,2,4,6,8 g/m^(2)AP were tested under uniaxial compression.Those flexible AP fibers,filling the resin-rich regions and further constructing the fiber bridging at the ply interfaces,can effectively suppress delamination growth and lead to very good improvements both in the compressive strength and the elastic modulus.The CFRP specimen with an optimum interlay thickness has a distinct shear failure mode instead of the typical delamination cracking along the direction of continuous carbon fibers.Compressive Strengths After Impacts(CAI)of 12.35 J were also measured,up to 90%improvement in CAI has been observed.It is concluded those ultra-thin interlays of non-woven AP micro/nano-fibers are beneficial to design and manufacture“high strength”CFRP composites.
基金supported financially by the National Natural Science Foundations of China(No.52102115)the Overseas High-End Talent Introduction Project of Sichuan Province,China(No.2023JDGD0013)the Natural Science Foundations of Sichuan Province,China(No.2023NSFSC0961)。
文摘Basalt Fiber Reinforced Polymer(BFRP)composites have huge potential application respects for some civil fields due to enough strength/modulus to weight and low cost by replacing carbon fiber composites.Aiming at the issues in the Resin-Rich Region(RRR)and Interfacial Transition Region(ITR)of fiber reinforced polymer composites,the characteristic Aramid Pulp(AP)fibers with micro-fiber trunk and nano-fiber branches were manufactured into multiple non-woven ultra-thin interleaving at the interlayers of BFRP composites via compression molding to reinforce the flexural strengths and elastic moduli.AP fibers were introduced into RRR to form interleaving at the interlayer,the brittle epoxy adhesive layer was improved and enabled to avoid cracking under a low external load.Free fiber branches of AP were also embedded into BF layer to construct quasi-vertical fiber bridging behaviors in ITR,stronger mechanical interlocking was created to prevent crack propagation along the bonding interface of BF/epoxy.Three-point bending testing results showed the interleaving film with 4 g/m^(2)AP exhibited the best effect among various areal densities and yielded average 315.75 MPa in flexural strength and 21.38 GPa in elastic modulus,having a 63.4%increment and a 47.1%increment respectively compared with the bases.Overall,the simple and low-cost AP interleaving is confirmed as an effective method in improving interlayer structure and flexural performance of BFRP composites,which may be considered to manufacture high-performance laminated fiber reinforced polymer composites in civil aviation industry.
基金supported by the National Natural Science Foundation of China(No.51975334)Key R&D Project of Shandong Province(No.2019JMRH0407)the Fundamental Research Funds of Shandong University Grant。
文摘The aramid fiber-reinforced composites(AFRC)can increase the durability of corresponding applications such as aerospace,automobile and other large structural parts,due to the improvement in hardness,heat build-up,wear properties and green environmental protection.However,because of its complex multiphase structure and unique heterogeneity and anisotropy,the poor compression fatigue resistance and the incident surface fibrillation are inevitable.To improve the assembly precision of AFRC,mechanical processing is necessary to meet the dimensional accuracy.This paper focuses on the influence of contour milling parameters on delamination defects during milling of AFRC laminates.A series of milling experiments are conducted and two different kinds of delamination defects including tearing delamination and uncut-off delamination are investigated.A computing method and model based on brittle fracture for the two different types of delamination are established.The results can be used for explaining the mechanism and regularity of delamination defects.The control strategy of delamination defects and evaluation method of finished surface integrity are further discussed.The results are meaningful to optimize cutting parameters,and provide a clear understanding of surface defects control.
基金The authors acknowledge the financial support from the National Natural Science Foundation of China(Nos.52071280 and 51972280)the Natural Science Foundation of Hebei Province,China(Nos.E2020203151 and E2022203208)+1 种基金the Research Program of the College Science&Technology of Hebei Province,China(No.ZD2020121)the Cultivation Project for Basic Research and Innovation of Yanshan University,China(No.2021LGZD016).
文摘Electronic devices have become ubiquitous in our daily lives,leading to a surge in the use of microwave absorbers and wearable sensor devices across various sectors.A prime example of this trend is the aramid nanofibers/polypyrrole/nickel(APN)aerogels,which serve dual roles as both microwave absorbers and pressure sensors.In this work,we focused on the preparation of aramid nanofibers/polypyrrole(AP15)aerogels,where the mass ratio of aramid nanofibers to pyrrole was 1:5.We employed the oxidative polymerization method for the preparation process.Following this,nickel was thermally evaporated onto the surface of the AP15 aerogels,resulting in the creation of an ultralight(9.35 mg·cm^(-3)).This aerogel exhibited a porous structure.The introduction of nickel into the aerogel aimed to enhance magnetic loss and adjust impedance matching,thereby improving electromagnetic wave absorption performance.The minimum reflection loss value achieved was-48.7 dB,and the maximum effective absorption bandwidth spanned 8.42 GHz with a thickness of 2.9 mm.These impressive metrics can be attributed to the three-dimensional network porous structure of the aerogel and perfect impedance matching.Moreover,the use of aramid nanofibers and a three-dimensional hole structure endowed the APN aerogels with good insulation,flame-retardant properties,and compression resilience.Even under a compression strain of 50%,the aerogel maintained its resilience over 500 cycles.The incorporation of polypyrrole and nickel particles further enhanced the conductivity of the aerogel.Consequently,the final APN aerogel sensor demonstrated high sensitivity(10.78 kPa-1)and thermal stability.In conclusion,the APN aerogels hold significant promise as ultra-broadband microwave absorbers and pressure sensors.
基金supported by the Fundamental Research Funds for the Central Universities 2232019A3-12National Natural Science Foundation of China(No.11375042)。
文摘Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally friendly C6 from a perfluoralkyl methlacrylate copolymer emulsion,AG-E081,was performed and a durable omniphobic fabric was achieved.C6 is an ecological alternative to C8(eight CF2 groups)fluorinated compounds,and it was thereafter successfully incorporated into aramid fabric to achieve a durable superomniphobic surface.The fabric became water and oil repellent with an extremely high water contact angle of 180°.As tested by the water spray AATCC test and hydrocarbon resistance test,the as-prepared fabric gained 100°(ISO 5)and grade number 4 respectively.Furthermore,the fabrics also showed significantly improved washing durability after ten washing cycles.By scanning electron microscopy(SEM),Fourier-transform infrared spectroscopy(FTIR)and x-ray photoelectron spectroscopy(XPS)tests,it is indicated that the durable superomniphobicity can be attributed to the roughness and activation of the aramid surface by the plasma pre-treatment,which induces more adsorption and chemical graft of the C6 copolymer.
基金supported by National Natural Science Foundation of China(Grant Nos.51377014,51407022 and 51677019)the National Key Research and Development program of China(2016YFC0207200)
文摘In this paper, a long line-shape dielectric barrier discharge excited by a nanosecond pulse and AC is generated in atmospheric air for the purpose of discussing the uniformity, stability and ability of aramid fiber treatment. The discharge images, waveforms of current and voltage,optical emission spectra, and gas temperatures of both discharges are compared. It is found that nanosecond pulsed discharge has a more uniform discharge morphology, higher energy efficiency and lower gas temperature, which indicates that nanosecond pulsed discharge is more suitable for surface modification. To reduce the water contact angle from 96° to about 60°, the energy cost is only about 1/7 compared with AC discharge. Scanning electron microscopy,Fourier transform infrared spectroscopy and x-ray photoelectron spectroscopy are employed to understand the mechanisms of hydrophilicity improvement.
