Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
In this paper,we study the geometric ergodicity of continuous time Markov pro-cesses in general state space.For the geometric ergodic continuous time Markov processes,the condition π(f^(p))<∞,p>1 is added.Usin...In this paper,we study the geometric ergodicity of continuous time Markov pro-cesses in general state space.For the geometric ergodic continuous time Markov processes,the condition π(f^(p))<∞,p>1 is added.Using the coupling method,we obtain the existence of a full absorbing set on which continuous time Markov processes are f-geometric ergodic.展开更多
The production and energy coupling system is used to mainly present energy flow, material flow, information flow, and their coupling interaction. Through the modeling and simulation of this system, the performance of ...The production and energy coupling system is used to mainly present energy flow, material flow, information flow, and their coupling interaction. Through the modeling and simulation of this system, the performance of energy flow can be analyzed and optimized in the process industry. In order to study this system, the component based hybrid Petri net methodology (CpnHPN) is proposed, synthesizing a number of extended Petri net methods and using the concept of energy place, material place, and information place. Through the interface place in CpnHPN, the component based encapsulation is established, which enables the production and energy coupling system to be built, analyzed, and optimized on the multi-level framework. Considering the block and brief simulation for hybrid system, the CpnHPN model is simulated with Simulink/Stateflow. To illustrate the use of the proposed methodology, the application of CpnHPN in the energy optimization of chlorine balance system is provided.展开更多
The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the def...The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the deformation gradient, the enhanced as- sumedstrain(EAS)FEM was applied to carry out the numerical simulation. Inorder to make the computation reliable ad avoid hour- glass mode inthe EAS element under large compressive strains, an alterative formof the original enhanced deformation gradient was employed. Inaddition, reduced factors were used in the computation of the elementlocal internal parameters and the enhanced part of elementalstiffness.展开更多
Basin-mountain coupling is a key issue for basin formation and evolution. The analysis of basin-mountain coupling process, as well as quantitative or semiquantitative restoration of prototype basin and the evolution o...Basin-mountain coupling is a key issue for basin formation and evolution. The analysis of basin-mountain coupling process, as well as quantitative or semiquantitative restoration of prototype basin and the evolution of continental margin, can be used to interpret the geological process of basin-range conversion and reconstruct early prototype basins, which is a difficult and leadin~ scientific oroblem of basin research.展开更多
Robot-automated spraying is widely used in various fields,such as the automotive,metalworking,furniture,and aero-space industries.Spraying quality is influenced by multiple factors,including robot speed,acceleration,e...Robot-automated spraying is widely used in various fields,such as the automotive,metalworking,furniture,and aero-space industries.Spraying quality is influenced by multiple factors,including robot speed,acceleration,end-effector trajectory,and spraying process constraints.To achieve high-quality spraying under the influence of multiple factors,this study proposes a multi-objective optimization method for the spraying trajectory that integrates spraying process constraints into the optimization process.First,a 7-degree-of-freedom rigid-flexible coupling serial spray painting robot system is introduced,which includes a motion decoupling mechanism and a tension amplification mechanism.Subsequently,a paint deposition model for the spray gun was established,and the influence of process constraints on spraying quality was analyzed.Trajectory planning for the spray painting robot,based on the septic B-spline interpolation method,was then performed.Based on this foundation,objective functions and constraint equations for spraying trajectory optimization were established.A multi-objective trajectory optimization method for spraying by the robot is proposed based on the NSGA-Ⅱ,which integrates the spraying process constraints.Finally,a prototype system of a 7-degree-of-freedom rigid-flexible coupling serial spray painting robot was constructed.Simulations and spraying experiments were conducted to verify the effectiveness of the proposed multi-objective trajectory optimization method.This paper presents a multi-objective optimization method for the spraying trajectory of a robot.In the proposed method,the optimized spraying trajectory is generated with the spraying process as the constraint and time,energy consumption,and impact during the spraying operation of the robot as the optimization objectives.展开更多
Coupled dissolution-precipitation is one of the critical processes influencing the mineralogical and geochemical evolution of pegmatites.This mechanism involves the simultaneous dissolution of primary mineral phases a...Coupled dissolution-precipitation is one of the critical processes influencing the mineralogical and geochemical evolution of pegmatites.This mechanism involves the simultaneous dissolution of primary mineral phases and the precipitation of secondary phases,driven by changes in the chemical environment,often mediated by hydrothermal fluids.The Bailongshan Li deposit,located in the West Kunlun region of northwest China,is a significant geological formation known for its rich lithium content and associated rare metals such as tantalum,niobium,and tin.This study investigates the coupled dissolution-precipitation processes that have played a crucial role in the mineralization of this deposit,focusing on key minerals,including cassiterite(Cst),columbite-group minerals(CGM),and elbaite(Elb).Using a combination of petrographic analysis,back-scattered electron(BSE)imaging,cathodoluminescence(CL)imaging,and micro X-ray fluorescence(XRF)mapping,we examined the textural and chemical characteristics of these minerals.Our findings reveal intricate patchy zoning patterns and element distributions(indicated by the Nb,Ta,W,Mn,Fe,Hf,Ti for CGM;Hf,Ti Rb,W,Nb,Ta for Cst;Ti,Zn,Fe,W,Hf,Mn,K for Elb)that indicate multiple stages of mineral alteration driven by fluid-mediated processes.The coupled dissolution-precipitation mechanisms observed in the Bailongshan deposit have resulted in significant redistribution and enrichment of economically valuable elements.The study highlights the importance of hydrothermal fluids in altering primary mineral phases and precipitating secondary phases with distinct compositions.These processes not only modified the mineralogical makeup of the pegmatite but also enhanced its economic potential by concentrating rare metals.Signatures of coupled dissolutionprecipitation processes can serve as an essential tool for mineral exploration,guiding the search for high-grade zones within similar pegmatitic formations.展开更多
To address the significant degradation of Space-Time Adaptive Processing(STAP)performance when the array elements have mutual coupling and gain/phase errors,a STAP algorithm with adaptive calibration for the above two...To address the significant degradation of Space-Time Adaptive Processing(STAP)performance when the array elements have mutual coupling and gain/phase errors,a STAP algorithm with adaptive calibration for the above two array errors is proposed in this article.First,based on a defined error matrix that simultaneously considers both array mutual coupling and gain/phase errors,a STAP signal model including these errors is given.Then,utilizing the defined signal model,it is demonstrated that the estimation of the defined error matrix can be formulized as a standard convex optimization problem with the low-rank structure of the clutter covariance matrix and the subspace projection theory.Once the defined error matrix is estimated by solving the convex optimization problem,it is illustrated that a STAP method with adaptive calibration of the mutual coupling and gain/phase errors is coined.Analyses also show that the proposed adaptive calibration algorithm only needs one training sample to construct the adaptive weight vector.Therefore,it can achieve a good detection performance even with severe non-homogeneous clutter environments.Finally,the simulation experiments verify the effectiveness of the proposed algorithm and the correctness of the analytical results.展开更多
An adaptive EFG-FE coupling method is proposed and developed for the numerical simulation of lateral extrusion and forward-backward extrusion. Initially, the simulation has been implemented by using a conventional FE ...An adaptive EFG-FE coupling method is proposed and developed for the numerical simulation of lateral extrusion and forward-backward extrusion. Initially, the simulation has been implemented by using a conventional FE model. During the deforming process, mesh quality is checked at every incremental step. Distorted elements are automatically converted to EFG nodes, whereas, the less distorted elements are reserved. A new algorithm to generate EFG nodes and interface elements is presented. This method is capable of dealing with large deformation and has higher computational efficiency than using an EFG method wholly. Numerical results demonstrate that the adaptive EFG-FE coupling method has reasonable accuracy and is effective for local bulk metal forming such as extrusion processes.展开更多
Based on the theory of elastic-plastic finite element method, the high-speed hot continuous rolling process of a billet is simulated and analyzed in vertical and horizontal passes. The billet is dragged into the passe...Based on the theory of elastic-plastic finite element method, the high-speed hot continuous rolling process of a billet is simulated and analyzed in vertical and horizontal passes. The billet is dragged into the passes by contact friction force between the billet and rollers. The rollers and billet are represented by respectively rigid and deformable bodies, and three-dimensional models are developed for the billet and rollers. The distribution of deformation field, effective strain, rolling force and temperature field are accurately calculated for the whole rolling process （including unstable and stable stages）. In addition, the rolling pressure on the width symmetry center is compared with that in the in-situ experimental measurements. It is revealed that various heat exchange phenomena among the billet, rollers and surroundings can result in unbalanced temperature distribution on the cross section. Rolling force and strain can change significantly when the billet is moved towards or away from the roller gap, and keep almost invariable in the stable stage. It is expected that the simulation results would be useful for practical manufacture and provide the theoretical foundation for improvement of process planning and optimization of process parameters.展开更多
High-performance terahertz(THz)logic gate devices are crucial components for signal processing and modulation,playing a significant role in the application of THz communication and imaging.Here,we propose a THz broadb...High-performance terahertz(THz)logic gate devices are crucial components for signal processing and modulation,playing a significant role in the application of THz communication and imaging.Here,we propose a THz broadband NOR logic encoder based on a graphene-metal hybrid metasurface.The unit structure consists of two symmetrical dual-gap metal split-ring resonators(DSRRs)arranged in a staggered configuration,with graphene strips embedded in their gaps.The NOR logic gate metadevice is controlled by the bias voltages independently applied to the two electrodes.Experiments show that when the bias voltages are applied to both electrodes,the metadevice achieves the NOR logic gate within a 0.52 THz bandwidth,with an average modulation depth above 80%.The experimental results match well with theoretical simulations.Additionally,the strong near-field coupling induced by the staggered DSRRs causes redshift at both LC resonance and dipole resonance.This phenomenon was demonstrated by coupled mode theory.Besides,we analyze the surface current distribution at resonances and propose four equivalent circuit models to elucidate the physical mechanisms of modulation under distinct loaded voltage conditions.The results not only advance modulation and logic gate designs for THz communication but also demonstrate significant potential applications in 6G networks,THz imaging,and radar systems.展开更多
The relativistic neutrino emissivity of the nucleonic direct URCA processes in neutron star matter is investigated within the relativistic Hartree-Fock approximation. We particularly study the influences of the tensor...The relativistic neutrino emissivity of the nucleonic direct URCA processes in neutron star matter is investigated within the relativistic Hartree-Fock approximation. We particularly study the influences of the tensor couplings of vector mesons ω and ρ on the nucleonic direct URCA processes. It is found that the inclusion of the tensor couplings of vector mesons w and p can slightly increase the maximum mass of neutron stars. In addition, the results indicate that the tensor couplings of vector mesons ω and ρ lead to obvious enhancement of the total neutrino emissivity for the nucleonic direct URCA processes, which must accelerate the cooling rate of the non- superfluid neutron star matter. However, when considering only the tensor coupling of vector meson ρ, the neutrino emissivity for the nucleonic direct URCA processes slightly declines at low densities and significantly increases at high densities. That is, the tensor coupling of vector meson ρ leads to the slow cooling rate of a low-mass neutron star and rapid cooling rate of a massive neutron star.展开更多
Fractured karst geothermal reservoir is a kind of typical geothermal reservoirs with the advantages of abundant storage water and easy reinjection of tail water during the period of geothermal utilization.Such geother...Fractured karst geothermal reservoir is a kind of typical geothermal reservoirs with the advantages of abundant storage water and easy reinjection of tail water during the period of geothermal utilization.Such geothermal system is also one of the geothermal reservoirs with the greatest potential for the development and utilization of geothermal energy in China.However,its geological structures are diverse(e.g.pore,fracture and vug),exhibiting complex characteristics of multiple scales,strong heterogeneity and various flow regimes.Therefore,the fluid-heat transfer processes and geothermal production performance of fractured karst geothermal reservoirs are not clarified.In this paper,a numerical model considering thermoehydraulic coupling processes based on the discrete fractureevug network approach is put forward,according to the characteristics of fracturedevuggy geothermal reservoirs.In addition,the accuracy of the numerical model is verified.The results obtained from this research are as follows.First,the numerical model considering the thermoehydraulic coupling process is put forward,in which the Darcy's law is used to describe the flow zone of porous medium,the NaviereStokes equation is used to illustrate the free flow zone of vugs,and the BeaverseJosepheSaffman boundary condition is used to couple the fluid flow between these two zones.Second,the connectivity of fracture network is the key parameter to control and evaluate the flow and heat transfer effects in fractured vuggy geothermal reservoirs.The existence of vugs plays an important role in the fluid flow and heat transfer in geothermal reservoirs.Third,the thermoehydraulic coupling model based on the discrete fractureevug network can effectively describe the fluid flow and heat transfer processes in fractured vuggy geothermal reservoirs.The connectivity of fracture networks controls the thermoehydraulic coupling processes in fractured vuggy geothermal reservoirs.Fourth,the existence of vugs seriously impacts the thermoehydraulic coupling processes in geothermal reservoirs.For instance,on the one hand,it increases the number of high-speed flow channels spanning across the system and even makes the system get connected.On the other hand,it increases the speed of local flow channels inside the system.In conclusion,this proposed method is of great significance for studying the development characteristics and optimizing their geothermal production performance of fractured vuggy geothermal reservoirs.展开更多
Considering the dynamic variation of roll gap and the transverse distribution of dynamic rolling force along the work roll width direction, the movement and deformation of rolls system, influenced by the coupling of v...Considering the dynamic variation of roll gap and the transverse distribution of dynamic rolling force along the work roll width direction, the movement and deformation of rolls system, influenced by the coupling of vertical chatter and transverse bending vibration, may cause instability and also bring product defect of thickness difference. Therefore, a rigid-flexible coupling vibration model of the rolls system was presented. The influence of dynamic characteristics on the rolling process stability and strip thickness distribution was investigated. Firstly, assuming the symmetry of upper and lower structures of six-high rolling mill, a transverse bending vibration model of three-beam system under simply supported boundary conditions was established, and a semi-analytical solution method was proposed to deal with this model. Then, considering both variation and change rate of the roll gap, a roll vertical chatter model with structure and process coupled was constructed, and the critical rolling speed for self-excited instability was determined by Routh stability criterion. Furthermore, a rigid-flexible coupling vibration model of the rolls system was built by connecting the vertical chatter model and transverse bending vibration model through the distribution of dynamic rolling force, and the dynamic characteristics of rolls system were analyzed. Finally, the strip exit thickness distributions under the stable and unstable rolling process were compared, and the product shape and thickness distribution characteristics were quantitatively evaluated by the crown and maximum longitudinal thickness difference.展开更多
Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our pre...Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our previous work [Acta Phys. Sin. 61 174301 （2012）], an analytical model to predict the sound absorption from vibrational relaxation in a gas medium is proposed. In this paper, we develop the model to decouple the V-V coupled energy to each vibrationaltranslational deexcitation path, and analyze how the multimode relaxations form the peaks of sound absorption spectra in gas mixtures. We prove that a multimode relaxation is the sum of its decoupled single-relaxation processes, and only the decoupled process with a significant isochoric-molar-heat can be observed as an absorption peak. The decoupling model clarifies the essential processes behind the peaks in spectra arising from the multimode relaxations in multi-component gas mixtures. The simulation validates the proposed decoupling model.展开更多
CS2 removal was obtained by coupling catalytic hyidation on bi-functional catalyst. On the hydrolysis active sites, CS2 is hydrolyzed to HES, while on the oxidation active sites, HES is oxidized to elemental S or sulf...CS2 removal was obtained by coupling catalytic hyidation on bi-functional catalyst. On the hydrolysis active sites, CS2 is hydrolyzed to HES, while on the oxidation active sites, HES is oxidized to elemental S or sulfuric acid deposited on the porous support. The above process can be expressed as follows： CS2 H2O→ COS H2O→ H2S O2→ S/SO4^2-. H2S oxidation eliminates its prohibition on C52 hydrolysis so that the rate of coupling removal CS2 is 5 times higher than that of CS2 hydrolysis. The same active energy of hydrolysis and coupling reaction also indicates that HES oxidation does not change the reaction mechanism of CS2 hydrolysis. Temperature has obvious effect on the process while the mole ratio of O2 concentration to CS2 concentration （O/S） does not, especially in excess of 2.5. The formation of sulfuric acid on the catalyst surface poisons hydrolysis active sites and causes the decrease of left OH^-1 concentration on the catalysts surface. Lower temperature is suggested for this bi-functional catalyst owing to the low yield ratio of S/SO4^2-.展开更多
The greatest challenges of rigorously modeling coupled hydro-mechanical(HM)processes in fractured geological media at different scales are associated with computational geometry.These challenges include dynamic sheari...The greatest challenges of rigorously modeling coupled hydro-mechanical(HM)processes in fractured geological media at different scales are associated with computational geometry.These challenges include dynamic shearing and opening of intersecting fractures at discrete fracture scales as a result of coupled processes,and contact alteration along rough fracture surfaces that triggers structural and physical changes of fractures at micro-asperity scale.In this paper,these challenges are tackled by developing a comprehensive modeling approach for coupled processes in fractured geological media based on numerical manifold method(NMM)at multiple scales.Based on their distinct geometric features,fractures are categorized into three different scales:dominant fracture,discrete fracture,and discontinuum asperity scales.Here the scale is relative,that of the fracture relative to that of the research interest or domain.Different geometric representations of fractures at different scales are used,and different governing equations and constitutive relationships are applied.For dominant fractures,a finite thickness zone model is developed to treat a fracture as a porous nonlinear domain.Nonlinear fracture mechanical behavior is accurately modeled with an implicit approach based on strain energy.For discrete fractures,a zero-dimensional model was developed for analyzing fluid flow and mechanics in fractures that are geometrically treated as boundaries of the rock matrix.With the zero-dimensional model,these fractures can be modeled with arbitrary orientations and intersections.They can be fluid conduits or seals,and can be open,bonded or sliding.For the discontinuum asperity scale,the geometry of rough fracture surfaces is explicitly represented and contacts involving dynamic alteration of contacts among asperities are rigorously calculated.Using this approach,fracture alteration caused by deformation,re-arrangement and sliding of rough surfaces can be captured.Our comprehensive model is able to handle the computational challenges with accurate representation of intersections and shearing of fractures at the discrete fracture scale and rigorously treats contacts along rough fracture surfaces at the discontinuum asperity scale.With future development of three-dimensional(3D)geometric representation of discrete fracture networks in porous rock and contacts among multi-body systems,this model is promising as a basis of 3D fully coupled analysis of fractures at multiple scales,for advancing understanding and optimizing energy recovery and storage in fractured geological media.展开更多
Carbon-mediated persulfate advanced oxidation processes(PS-AOPs)are appealing in contaminant remediation.For the first time,S,B-co-doped carbon-based persulfate activators were synthesized through direct carbonization...Carbon-mediated persulfate advanced oxidation processes(PS-AOPs)are appealing in contaminant remediation.For the first time,S,B-co-doped carbon-based persulfate activators were synthesized through direct carbonization of sodium lignosulfonate and boric acid.By degrading sulfamethoxazole(SMX),CSB-750 obtained 98.7%removal and 81.4%mineralization within 30 min.In comparison with solo S or B doping,S and B co-doped carbon showed the coupling effect for enhanced catalysis.The rate constant(kobs)of 0.1679 min^(-1)was 22.38-and 279.83-fold higher than those of CS-750(0.0075 min^(-1))and CB-750(0.0006 min^(-1)),respectively.The degradation was efficient at strong acidic and weak basic conditions(pH 3-9).Substantial inhibition effect was presented at strong basic condition(pH 10.95)and in presence of CO_(3)^(2-).The CO_(3)^(2-)-caused inhibition was the combined result of the cooperation of pH and quenching O_(2)^(·-).Thiophene sulfur,BC_(3),BC_(2)O,and structural defects were identified as the active sites for PS activation.Radical and nonradical pathways were both involved in the CSB-750/PS/SMX system,where^(1)O_(2)dominated the degradation,SO_(4)^(·-),·OH and direct electron transfer played the subordinate role,and O_(2)^(·-)served as a precursor for the formation of partial^(1)O_(2).The toxicity of degradation system,the effect of real water matrix,and the reusability of carbocatalysts were comprehensively analyzed.Nine possible degradation pathways were proposed.This work focuses on the catalytic performance improvement through the coupling effect of S,B co-doping,and develops an advanced heteroatom doping system to fabricate carbonaceous persulfate activators.展开更多
The coupled thermo-hydro-mechanical and chemical (THMC) processes of stress/deformation,fluid flow,temperature and geochemical reactions of the geological media,namely fractured rocks and soils,play an important role ...The coupled thermo-hydro-mechanical and chemical (THMC) processes of stress/deformation,fluid flow,temperature and geochemical reactions of the geological media,namely fractured rocks and soils,play an important role in design,construction,operation and environmental impact assessments of rock and soil engineering works such as underground nuclear waste repositories,oil/gas production and storage,geothermal energy extraction,landslides and slope stability,hydropower and water conservancy complexes,etc. This paper presents an overview of the international and Chinese experiences in numerical modeling of the coupled THMC processes for both the state-of-the-knowledge,remaining challenges and possible future prospects.展开更多
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金Supported by the Natural Science Foundation of Hubei Province(2021CFB275)National Natural Science Foundation of China(12301667).
文摘In this paper,we study the geometric ergodicity of continuous time Markov pro-cesses in general state space.For the geometric ergodic continuous time Markov processes,the condition π(f^(p))<∞,p>1 is added.Using the coupling method,we obtain the existence of a full absorbing set on which continuous time Markov processes are f-geometric ergodic.
基金Shanghai Municipal Science & Technology Projects, China (No. 09DZ1203300, No. 10JC1415200)
文摘The production and energy coupling system is used to mainly present energy flow, material flow, information flow, and their coupling interaction. Through the modeling and simulation of this system, the performance of energy flow can be analyzed and optimized in the process industry. In order to study this system, the component based hybrid Petri net methodology (CpnHPN) is proposed, synthesizing a number of extended Petri net methods and using the concept of energy place, material place, and information place. Through the interface place in CpnHPN, the component based encapsulation is established, which enables the production and energy coupling system to be built, analyzed, and optimized on the multi-level framework. Considering the block and brief simulation for hybrid system, the CpnHPN model is simulated with Simulink/Stateflow. To illustrate the use of the proposed methodology, the application of CpnHPN in the energy optimization of chlorine balance system is provided.
基金[This work was financially supported by a research grant from the Hong Kong Polytechnic University (No.G-V694).]
文摘The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the deformation gradient, the enhanced as- sumedstrain(EAS)FEM was applied to carry out the numerical simulation. Inorder to make the computation reliable ad avoid hour- glass mode inthe EAS element under large compressive strains, an alterative formof the original enhanced deformation gradient was employed. Inaddition, reduced factors were used in the computation of the elementlocal internal parameters and the enhanced part of elementalstiffness.
基金supported by the National Science Foundation of China(grant No.41476053)the China Geological Project(grants No.GZH201400214 and DD20160153)
文摘Basin-mountain coupling is a key issue for basin formation and evolution. The analysis of basin-mountain coupling process, as well as quantitative or semiquantitative restoration of prototype basin and the evolution of continental margin, can be used to interpret the geological process of basin-range conversion and reconstruct early prototype basins, which is a difficult and leadin~ scientific oroblem of basin research.
基金Supported by National Natural Science Foundation of China(Grant Nos.52335002,51925502)。
文摘Robot-automated spraying is widely used in various fields,such as the automotive,metalworking,furniture,and aero-space industries.Spraying quality is influenced by multiple factors,including robot speed,acceleration,end-effector trajectory,and spraying process constraints.To achieve high-quality spraying under the influence of multiple factors,this study proposes a multi-objective optimization method for the spraying trajectory that integrates spraying process constraints into the optimization process.First,a 7-degree-of-freedom rigid-flexible coupling serial spray painting robot system is introduced,which includes a motion decoupling mechanism and a tension amplification mechanism.Subsequently,a paint deposition model for the spray gun was established,and the influence of process constraints on spraying quality was analyzed.Trajectory planning for the spray painting robot,based on the septic B-spline interpolation method,was then performed.Based on this foundation,objective functions and constraint equations for spraying trajectory optimization were established.A multi-objective trajectory optimization method for spraying by the robot is proposed based on the NSGA-Ⅱ,which integrates the spraying process constraints.Finally,a prototype system of a 7-degree-of-freedom rigid-flexible coupling serial spray painting robot was constructed.Simulations and spraying experiments were conducted to verify the effectiveness of the proposed multi-objective trajectory optimization method.This paper presents a multi-objective optimization method for the spraying trajectory of a robot.In the proposed method,the optimized spraying trajectory is generated with the spraying process as the constraint and time,energy consumption,and impact during the spraying operation of the robot as the optimization objectives.
基金jointly supported by the National Natural Science Foundation of China(Nos.42250202,92162323,42272075)the Fundamental Research Funds for the Central Universities,Sun Yat-sen University(No.24lgqb001)+1 种基金the Natural Science Foundation Project of Guangdong Province(No.2022A1515010003)the Guangdong Province Introduced Innovative R&D Team of Big Data—Mathematical Earth Sciences and Extreme Geological Events Team(No.2021ZT09H399)。
文摘Coupled dissolution-precipitation is one of the critical processes influencing the mineralogical and geochemical evolution of pegmatites.This mechanism involves the simultaneous dissolution of primary mineral phases and the precipitation of secondary phases,driven by changes in the chemical environment,often mediated by hydrothermal fluids.The Bailongshan Li deposit,located in the West Kunlun region of northwest China,is a significant geological formation known for its rich lithium content and associated rare metals such as tantalum,niobium,and tin.This study investigates the coupled dissolution-precipitation processes that have played a crucial role in the mineralization of this deposit,focusing on key minerals,including cassiterite(Cst),columbite-group minerals(CGM),and elbaite(Elb).Using a combination of petrographic analysis,back-scattered electron(BSE)imaging,cathodoluminescence(CL)imaging,and micro X-ray fluorescence(XRF)mapping,we examined the textural and chemical characteristics of these minerals.Our findings reveal intricate patchy zoning patterns and element distributions(indicated by the Nb,Ta,W,Mn,Fe,Hf,Ti for CGM;Hf,Ti Rb,W,Nb,Ta for Cst;Ti,Zn,Fe,W,Hf,Mn,K for Elb)that indicate multiple stages of mineral alteration driven by fluid-mediated processes.The coupled dissolution-precipitation mechanisms observed in the Bailongshan deposit have resulted in significant redistribution and enrichment of economically valuable elements.The study highlights the importance of hydrothermal fluids in altering primary mineral phases and precipitating secondary phases with distinct compositions.These processes not only modified the mineralogical makeup of the pegmatite but also enhanced its economic potential by concentrating rare metals.Signatures of coupled dissolutionprecipitation processes can serve as an essential tool for mineral exploration,guiding the search for high-grade zones within similar pegmatitic formations.
基金co-supported by the National Natural Science Foundation of China(No.12374431)。
文摘To address the significant degradation of Space-Time Adaptive Processing(STAP)performance when the array elements have mutual coupling and gain/phase errors,a STAP algorithm with adaptive calibration for the above two array errors is proposed in this article.First,based on a defined error matrix that simultaneously considers both array mutual coupling and gain/phase errors,a STAP signal model including these errors is given.Then,utilizing the defined signal model,it is demonstrated that the estimation of the defined error matrix can be formulized as a standard convex optimization problem with the low-rank structure of the clutter covariance matrix and the subspace projection theory.Once the defined error matrix is estimated by solving the convex optimization problem,it is illustrated that a STAP method with adaptive calibration of the mutual coupling and gain/phase errors is coined.Analyses also show that the proposed adaptive calibration algorithm only needs one training sample to construct the adaptive weight vector.Therefore,it can achieve a good detection performance even with severe non-homogeneous clutter environments.Finally,the simulation experiments verify the effectiveness of the proposed algorithm and the correctness of the analytical results.
基金National Natural Science Foundation of China(No.50575143)Specialized Research Fund for the Doctoral Program of HigherEducation (No.20040248005).
文摘An adaptive EFG-FE coupling method is proposed and developed for the numerical simulation of lateral extrusion and forward-backward extrusion. Initially, the simulation has been implemented by using a conventional FE model. During the deforming process, mesh quality is checked at every incremental step. Distorted elements are automatically converted to EFG nodes, whereas, the less distorted elements are reserved. A new algorithm to generate EFG nodes and interface elements is presented. This method is capable of dealing with large deformation and has higher computational efficiency than using an EFG method wholly. Numerical results demonstrate that the adaptive EFG-FE coupling method has reasonable accuracy and is effective for local bulk metal forming such as extrusion processes.
基金Funded by National Natural Science Foundation of China (No. 51004047)Scientific Research Fund of Hunan Provincial Education Department (No. 10B020)Provincial Natural Science Foundation of Hunan (No. 09jj4024)
文摘Based on the theory of elastic-plastic finite element method, the high-speed hot continuous rolling process of a billet is simulated and analyzed in vertical and horizontal passes. The billet is dragged into the passes by contact friction force between the billet and rollers. The rollers and billet are represented by respectively rigid and deformable bodies, and three-dimensional models are developed for the billet and rollers. The distribution of deformation field, effective strain, rolling force and temperature field are accurately calculated for the whole rolling process （including unstable and stable stages）. In addition, the rolling pressure on the width symmetry center is compared with that in the in-situ experimental measurements. It is revealed that various heat exchange phenomena among the billet, rollers and surroundings can result in unbalanced temperature distribution on the cross section. Rolling force and strain can change significantly when the billet is moved towards or away from the roller gap, and keep almost invariable in the stable stage. It is expected that the simulation results would be useful for practical manufacture and provide the theoretical foundation for improvement of process planning and optimization of process parameters.
基金supported by the National Natural Science Foundation of China(Grant Nos.62005058 and 62365006)the Natural Science Foundation of Guangxi,China(Grant No.2020GXNSFBA238012)+2 种基金the China Postdoctoral Science Foundation(Grant No.2020M683726)the Innovation Project of Guangxi Graduate Education(Grant Nos.YCSW2024345 and YCBZ2025157)the Guangxi Key Laboratory of Automatic Detecting Technology and Instruments(Grant No.YQ24101).
文摘High-performance terahertz(THz)logic gate devices are crucial components for signal processing and modulation,playing a significant role in the application of THz communication and imaging.Here,we propose a THz broadband NOR logic encoder based on a graphene-metal hybrid metasurface.The unit structure consists of two symmetrical dual-gap metal split-ring resonators(DSRRs)arranged in a staggered configuration,with graphene strips embedded in their gaps.The NOR logic gate metadevice is controlled by the bias voltages independently applied to the two electrodes.Experiments show that when the bias voltages are applied to both electrodes,the metadevice achieves the NOR logic gate within a 0.52 THz bandwidth,with an average modulation depth above 80%.The experimental results match well with theoretical simulations.Additionally,the strong near-field coupling induced by the staggered DSRRs causes redshift at both LC resonance and dipole resonance.This phenomenon was demonstrated by coupled mode theory.Besides,we analyze the surface current distribution at resonances and propose four equivalent circuit models to elucidate the physical mechanisms of modulation under distinct loaded voltage conditions.The results not only advance modulation and logic gate designs for THz communication but also demonstrate significant potential applications in 6G networks,THz imaging,and radar systems.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11447165,11373047 and 11265009the Youth Innovation Promotion Association of Chinese Academy of Sciences under Grant No 2016056
文摘The relativistic neutrino emissivity of the nucleonic direct URCA processes in neutron star matter is investigated within the relativistic Hartree-Fock approximation. We particularly study the influences of the tensor couplings of vector mesons ω and ρ on the nucleonic direct URCA processes. It is found that the inclusion of the tensor couplings of vector mesons w and p can slightly increase the maximum mass of neutron stars. In addition, the results indicate that the tensor couplings of vector mesons ω and ρ lead to obvious enhancement of the total neutrino emissivity for the nucleonic direct URCA processes, which must accelerate the cooling rate of the non- superfluid neutron star matter. However, when considering only the tensor coupling of vector meson ρ, the neutrino emissivity for the nucleonic direct URCA processes slightly declines at low densities and significantly increases at high densities. That is, the tensor coupling of vector meson ρ leads to the slow cooling rate of a low-mass neutron star and rapid cooling rate of a massive neutron star.
基金Major science and technology projects of PetroChina“Study on production mechanism and reservoir numerical simulation technology of deep carbonate reservoir”(Serial number:ZD2019-183-008)Project sponsored by the National Natural Science Foundation of China“Study on fluid-solid coupling seepage theory and numerical simulation of condensate gas reservoir in fractured-vuggy carbonate rocks”(Serial number:52074336)Key project of the National Natural Science Foundation of China“Study on heat and mass transfer mechanism in coupled heat,fluid,dynamic and chemical fields of enhanced geothermal system”(Serial number:51936001).
文摘Fractured karst geothermal reservoir is a kind of typical geothermal reservoirs with the advantages of abundant storage water and easy reinjection of tail water during the period of geothermal utilization.Such geothermal system is also one of the geothermal reservoirs with the greatest potential for the development and utilization of geothermal energy in China.However,its geological structures are diverse(e.g.pore,fracture and vug),exhibiting complex characteristics of multiple scales,strong heterogeneity and various flow regimes.Therefore,the fluid-heat transfer processes and geothermal production performance of fractured karst geothermal reservoirs are not clarified.In this paper,a numerical model considering thermoehydraulic coupling processes based on the discrete fractureevug network approach is put forward,according to the characteristics of fracturedevuggy geothermal reservoirs.In addition,the accuracy of the numerical model is verified.The results obtained from this research are as follows.First,the numerical model considering the thermoehydraulic coupling process is put forward,in which the Darcy's law is used to describe the flow zone of porous medium,the NaviereStokes equation is used to illustrate the free flow zone of vugs,and the BeaverseJosepheSaffman boundary condition is used to couple the fluid flow between these two zones.Second,the connectivity of fracture network is the key parameter to control and evaluate the flow and heat transfer effects in fractured vuggy geothermal reservoirs.The existence of vugs plays an important role in the fluid flow and heat transfer in geothermal reservoirs.Third,the thermoehydraulic coupling model based on the discrete fractureevug network can effectively describe the fluid flow and heat transfer processes in fractured vuggy geothermal reservoirs.The connectivity of fracture networks controls the thermoehydraulic coupling processes in fractured vuggy geothermal reservoirs.Fourth,the existence of vugs seriously impacts the thermoehydraulic coupling processes in geothermal reservoirs.For instance,on the one hand,it increases the number of high-speed flow channels spanning across the system and even makes the system get connected.On the other hand,it increases the speed of local flow channels inside the system.In conclusion,this proposed method is of great significance for studying the development characteristics and optimizing their geothermal production performance of fractured vuggy geothermal reservoirs.
基金supported by the National Natural Science Foundation of China(No.51775038).
文摘Considering the dynamic variation of roll gap and the transverse distribution of dynamic rolling force along the work roll width direction, the movement and deformation of rolls system, influenced by the coupling of vertical chatter and transverse bending vibration, may cause instability and also bring product defect of thickness difference. Therefore, a rigid-flexible coupling vibration model of the rolls system was presented. The influence of dynamic characteristics on the rolling process stability and strip thickness distribution was investigated. Firstly, assuming the symmetry of upper and lower structures of six-high rolling mill, a transverse bending vibration model of three-beam system under simply supported boundary conditions was established, and a semi-analytical solution method was proposed to deal with this model. Then, considering both variation and change rate of the roll gap, a roll vertical chatter model with structure and process coupled was constructed, and the critical rolling speed for self-excited instability was determined by Routh stability criterion. Furthermore, a rigid-flexible coupling vibration model of the rolls system was built by connecting the vertical chatter model and transverse bending vibration model through the distribution of dynamic rolling force, and the dynamic characteristics of rolls system were analyzed. Finally, the strip exit thickness distributions under the stable and unstable rolling process were compared, and the product shape and thickness distribution characteristics were quantitatively evaluated by the crown and maximum longitudinal thickness difference.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60971009 and 61001011)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20090142110019)+1 种基金the Natural Science Foundation of Hubei Province, China (Grant No. 2010CDB02701)the Fundamental Research Funds for the Central Universities, China (Grant No. 2012QN083)
文摘Decoupling the complicated vibrational-vibrational （V-V） coupling of a multimode vibrational relaxation remains a challenge for analyzing the sound relaxational absorption in multi-component gas mixtures. In our previous work [Acta Phys. Sin. 61 174301 （2012）], an analytical model to predict the sound absorption from vibrational relaxation in a gas medium is proposed. In this paper, we develop the model to decouple the V-V coupled energy to each vibrationaltranslational deexcitation path, and analyze how the multimode relaxations form the peaks of sound absorption spectra in gas mixtures. We prove that a multimode relaxation is the sum of its decoupled single-relaxation processes, and only the decoupled process with a significant isochoric-molar-heat can be observed as an absorption peak. The decoupling model clarifies the essential processes behind the peaks in spectra arising from the multimode relaxations in multi-component gas mixtures. The simulation validates the proposed decoupling model.
文摘CS2 removal was obtained by coupling catalytic hyidation on bi-functional catalyst. On the hydrolysis active sites, CS2 is hydrolyzed to HES, while on the oxidation active sites, HES is oxidized to elemental S or sulfuric acid deposited on the porous support. The above process can be expressed as follows： CS2 H2O→ COS H2O→ H2S O2→ S/SO4^2-. H2S oxidation eliminates its prohibition on C52 hydrolysis so that the rate of coupling removal CS2 is 5 times higher than that of CS2 hydrolysis. The same active energy of hydrolysis and coupling reaction also indicates that HES oxidation does not change the reaction mechanism of CS2 hydrolysis. Temperature has obvious effect on the process while the mole ratio of O2 concentration to CS2 concentration （O/S） does not, especially in excess of 2.5. The formation of sulfuric acid on the catalyst surface poisons hydrolysis active sites and causes the decrease of left OH^-1 concentration on the catalysts surface. Lower temperature is suggested for this bi-functional catalyst owing to the low yield ratio of S/SO4^2-.
基金supported by Laboratory Directed Research and Development(LDRD)funding from Berkeley Labsupported by Open Fund of the State Key Laboratory of Geomechanics and Geotechnical Engineering,Institute of Rock and Soil Mechanics,Chinese Academy of Sciences(Grant No.Z017004)。
文摘The greatest challenges of rigorously modeling coupled hydro-mechanical(HM)processes in fractured geological media at different scales are associated with computational geometry.These challenges include dynamic shearing and opening of intersecting fractures at discrete fracture scales as a result of coupled processes,and contact alteration along rough fracture surfaces that triggers structural and physical changes of fractures at micro-asperity scale.In this paper,these challenges are tackled by developing a comprehensive modeling approach for coupled processes in fractured geological media based on numerical manifold method(NMM)at multiple scales.Based on their distinct geometric features,fractures are categorized into three different scales:dominant fracture,discrete fracture,and discontinuum asperity scales.Here the scale is relative,that of the fracture relative to that of the research interest or domain.Different geometric representations of fractures at different scales are used,and different governing equations and constitutive relationships are applied.For dominant fractures,a finite thickness zone model is developed to treat a fracture as a porous nonlinear domain.Nonlinear fracture mechanical behavior is accurately modeled with an implicit approach based on strain energy.For discrete fractures,a zero-dimensional model was developed for analyzing fluid flow and mechanics in fractures that are geometrically treated as boundaries of the rock matrix.With the zero-dimensional model,these fractures can be modeled with arbitrary orientations and intersections.They can be fluid conduits or seals,and can be open,bonded or sliding.For the discontinuum asperity scale,the geometry of rough fracture surfaces is explicitly represented and contacts involving dynamic alteration of contacts among asperities are rigorously calculated.Using this approach,fracture alteration caused by deformation,re-arrangement and sliding of rough surfaces can be captured.Our comprehensive model is able to handle the computational challenges with accurate representation of intersections and shearing of fractures at the discrete fracture scale and rigorously treats contacts along rough fracture surfaces at the discontinuum asperity scale.With future development of three-dimensional(3D)geometric representation of discrete fracture networks in porous rock and contacts among multi-body systems,this model is promising as a basis of 3D fully coupled analysis of fractures at multiple scales,for advancing understanding and optimizing energy recovery and storage in fractured geological media.
基金financially supported by the GuangDong Basic and Applied Basic Research Foundation(Nos.2019A1515110649,2020A1515110271,2019A1515110244)the National Natural,Science Fund of China(No.51908127)+1 种基金the Guangdong Province Universities and Colleges Pearl River Scholar Funded Scheme(2017)the Research Team in Dongguan University of Technology(No.TDYB2019013)。
文摘Carbon-mediated persulfate advanced oxidation processes(PS-AOPs)are appealing in contaminant remediation.For the first time,S,B-co-doped carbon-based persulfate activators were synthesized through direct carbonization of sodium lignosulfonate and boric acid.By degrading sulfamethoxazole(SMX),CSB-750 obtained 98.7%removal and 81.4%mineralization within 30 min.In comparison with solo S or B doping,S and B co-doped carbon showed the coupling effect for enhanced catalysis.The rate constant(kobs)of 0.1679 min^(-1)was 22.38-and 279.83-fold higher than those of CS-750(0.0075 min^(-1))and CB-750(0.0006 min^(-1)),respectively.The degradation was efficient at strong acidic and weak basic conditions(pH 3-9).Substantial inhibition effect was presented at strong basic condition(pH 10.95)and in presence of CO_(3)^(2-).The CO_(3)^(2-)-caused inhibition was the combined result of the cooperation of pH and quenching O_(2)^(·-).Thiophene sulfur,BC_(3),BC_(2)O,and structural defects were identified as the active sites for PS activation.Radical and nonradical pathways were both involved in the CSB-750/PS/SMX system,where^(1)O_(2)dominated the degradation,SO_(4)^(·-),·OH and direct electron transfer played the subordinate role,and O_(2)^(·-)served as a precursor for the formation of partial^(1)O_(2).The toxicity of degradation system,the effect of real water matrix,and the reusability of carbocatalysts were comprehensively analyzed.Nine possible degradation pathways were proposed.This work focuses on the catalytic performance improvement through the coupling effect of S,B co-doping,and develops an advanced heteroatom doping system to fabricate carbonaceous persulfate activators.
基金Supported by the Special Funds fo Major State Basic Research Project (2002CB412708).
文摘The coupled thermo-hydro-mechanical and chemical (THMC) processes of stress/deformation,fluid flow,temperature and geochemical reactions of the geological media,namely fractured rocks and soils,play an important role in design,construction,operation and environmental impact assessments of rock and soil engineering works such as underground nuclear waste repositories,oil/gas production and storage,geothermal energy extraction,landslides and slope stability,hydropower and water conservancy complexes,etc. This paper presents an overview of the international and Chinese experiences in numerical modeling of the coupled THMC processes for both the state-of-the-knowledge,remaining challenges and possible future prospects.
