Using cemented rockfill to replace coal pillars offers an effective solution for reducing solid waste while ensuring the safety of gob-side entries.However,achieving the balance among low cost,high waste recycling rat...Using cemented rockfill to replace coal pillars offers an effective solution for reducing solid waste while ensuring the safety of gob-side entries.However,achieving the balance among low cost,high waste recycling rates,and adequate strength remains a significant challenge for cemented rockfill.This study used a composite alkali activator to activate gangue cemented rockfill.The compressive strength,scanning electron microscopy,energy dispersive spectrometer,mercury intrusion porosimetry,X-ray diffraction,and thermogra-vimetric tests were carried out to investigate the effect of the composite alkali activator proportion on the compressive strength,micro-structure,and composition of the cemented rockfill.The calcium silicate hydrate(C–S–H)molecular model of cemented rockfill was con-structed to explore the fracture evolution of the nucleated molecular structure under tension.The results show that compressive strength initially increased and then decreased with the activator proportion,the optimal activator proportion of 1:2 resulted in a 31.25%increase in strength at 3 d.This reasonable activator proportion strengthens the pozzolanic effect of gangue,and consumes more calcium hydroxide to inhibit its agglomeration,ultimately achieving the densification of microstructure.The activator proportion inevitably substitutes calcium ions with sodium ions in the C–S–H molecular model.The 12%substitution of calcium ions increases the adhesion between silicon chain layers,which is beneficial to the interlayer stress transfer.This work proposes a method for preparing low-cost cemented rockfill from al-kali-activated gangue,which can be used for solid waste recycling and reducing cement consumption to achieve low-carbon goals.展开更多
Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to re...Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to reinforce GRS. The effects of cement content and SiO_(2)/Na2O ratio of the alkaline solution on the static and dynamic strengths of GRS were discussed. Microscopically, the reinforcement mechanism and coupling effect were examined using X-ray diffraction (XRD), micro-computed tomography (micro-CT), and scanning electron microscopy (SEM). The results indicated that the addition of 2% cement and an alkaline solution with an SiO_(2)/Na2O ratio of 0.5 led to the densest matrix, lowest porosity, and highest static compressive strength, which was 4994 kPa with a dynamic impact resistance of 75.4 kN after adding glass fiber. The compressive strength and dynamic impact resistance were a result of the coupling effect of cement hydration, a pozzolanic reaction of clay minerals in the GRS, and the alkali activation of clay minerals. Excessive cement addition or an excessively high SiO_(2)/Na2O ratio in the alkaline solution can have negative effects, such as the destruction of C-(A)-S-H gels by the alkaline solution and hindering the production of N-A-S-H gels. This can result in damage to the matrix of reinforced GRS, leading to a decrease in both static and dynamic strengths. This study suggests that further research is required to gain a more precise understanding of the effects of this mixture in terms of reducing our carbon footprint and optimizing its properties. The findings indicate that cement and alkaline solution are appropriate for GRS and that the reinforced GRS can be used for high-strength foundation and embankment construction. The study provides an analysis of strategies for mitigating and managing GRS slope failures, as well as enhancing roadbed performance.展开更多
The technology of solid-state lighting has developed for decades in various industries.Phosphor,as an element part,determines the application domain of lighting products.For instance,blue and redemitting phosphors are...The technology of solid-state lighting has developed for decades in various industries.Phosphor,as an element part,determines the application domain of lighting products.For instance,blue and redemitting phosphors are required in the process of plant supplementing light,arrow-band emitting phosphors are applied to backlight displays,etc.In this work,a Bi^(3+)-activated blue phosphor was obtained in a symmetrical and co mpact crystal structure of Gd3Sb07(GSO).Then,the co-doping strategy of alkali metal ions(Li^(+),Na^(+),and K^(+))was used to optimize the performance.The result shows that the photoluminescence intensity is increased by 2.1 times and 1.3 times respectively by introducing Li~+and K^(+)ions.Not only that,it also achieves narrow-band emitting with the full width of half-maximum(FWHM)reaching 42 nm through Na^(+)doping,and its excitation peak position also shifts from 322 to 375 nm,which can be well excited by near-ultraviolet(NUV)light emitting diode(LED)chips(365 nm).Meanwhile,the electroluminescence spectrum of GSO:0.6 mol%Bi^(3+),3 wt%Na^(+)matches up to 93.39%of the blue part of the absorption spectrum of chlorophyll a.In summary,the Bi^(3+)-activated blue phosphor reported in this work can synchronously meet the requirements of plant light replenishment and field emission displays.展开更多
In this study,the catalysis function of Na_(2)CO_(3) to the structural properties of xylan char was well investigated with Na_(2)CO_(3) on,and the electrochemical performance of xylan char as an anode material for sod...In this study,the catalysis function of Na_(2)CO_(3) to the structural properties of xylan char was well investigated with Na_(2)CO_(3) on,and the electrochemical performance of xylan char as an anode material for sodium-ion batteries was tested.The characterization of X-ray microscopy and scanning electron microscopy demonstrated that the morphological structure of xylan char was altered due to the addition of Na_(2)CO_(3) catalyst.The increasement of the Na_(2)CO_(3)/xylan ratio resulted in a slenderization of the triangular prism shape of the char skeleton and a reduction in porosity.X-ray diffraction analysis revealed that Na_(2)CO_(3) promoted the growth of the(004)crystal plane of graphite during xylan pyrolysis,while inhibiting the formation of the(100/101)crystal planes.Raman spectroscopy analysis indicated that the presence of Na_(2)CO_(3)had changed the graphitization degree of xylan char.Electrochemical tests further showed that char prepared with a Na_(2)CO_(3)/xylan mass ratio of 1∶1 exhibited the highest sodium storage capacity.This study provides a pathway for the rational design carbon materials derived from xylan for future applications in energy storage devices.展开更多
Chemical hydrogen storage in organic materials is a promising method thanks to its high storage density,reversibility,and safety.However,the dehydrogenation process of organic materials requires high temperatures due ...Chemical hydrogen storage in organic materials is a promising method thanks to its high storage density,reversibility,and safety.However,the dehydrogenation process of organic materials requires high temperatures due to their unfavorable thermodynamic properties.This study proposes a strategy to design a new type of hydrogen storage materials,i.e.,alkali metal pyridinolate/piperidinolate pairs,by combining the effects of a heteroatom and an alkali metal in one molecule to achieve suitable dehydrogenation thermodynamics along with high hydrogen storage capacities.These air-stable compounds can be synthesized using low-cost reactants and water as a green solvent.Thermodynamic predictions indicate that enthalpy changes of dehydrogenation(ΔH_(d))can be significantly reduced to the optimal range for efficient hydrogen release,exemplified by lithium 2-piperidinolate with a 5.6 wt%hydrogen capacity and a suitableΔH_(d)of 32.2 kJ/mol-H_(2).Experimental results obtained using sodium systems validate the computational predictions,demonstrating reversible hydrogen storage even below 100℃.The superior hydrogen desorption performance of alkali metal piperidinolates could be attributed to their suitableΔH_(d)induced by the combined effect of ring nitrogen and metal substitution on their structures.This study not only reports new low-cost hydrogen storage materials but also provides a rational design strategy for developing metalorganic compounds possessing high hydrogen capacities and suitable thermodynamics for efficient hydrogen storage.展开更多
Ln-containing polyoxoniobates(PONbs)have appealing applications in luminescence,information encryption and magnetic fields,but the synthesis of PONbs containing high-nuclearity Ln-O clusters is challenging due to the ...Ln-containing polyoxoniobates(PONbs)have appealing applications in luminescence,information encryption and magnetic fields,but the synthesis of PONbs containing high-nuclearity Ln-O clusters is challenging due to the easy hydrolysis of Ln^(3+)ions in alkaline environments.In this paper,we are able to integrate CO_(3)^(2-)and high-nuclearity Ln-O clusters into PONb to construct an inorganic giant Eu_(19)-embedded PONb H_(49)K_(16)Na_(13)(H_(2)O)_(63)[Eu_(21)O_(2)(OH)_(7)(H_(2)O)_(5)(Nb_(7)O_(22))_(10)(Nb_(2)O_(6))_(2)(CO_(3))_(18)]·91H_(2)O(1),which contains the highest nuclearity Eu-O clusters and the largest number of Eu^(3+)ions among PONbs.In addition,the film that was prepared by mixing 1 with gelatin and glycerol,exhibits reversible luminescence switching behavior under acid/alkali stimulation and has been used to create a fluorescence-encoded information approach.This work paves a feasible strategy for the construction of high-nuclearity Ln-O cluster-containing PONbs and the expansion of the application of Ln-containing PONbs in information encryption.展开更多
We read with great interest the investigations conducted by Pourakbar et al.(2024)on the“Stabilization of clay soil using alkali-activated sewage sludge.”The authors have investigated the feasibility of utilizing al...We read with great interest the investigations conducted by Pourakbar et al.(2024)on the“Stabilization of clay soil using alkali-activated sewage sludge.”The authors have investigated the feasibility of utilizing alkali-activated sewage sludge(AASS)as a binder for stabilizing the clayey soil.Sewage sludge(SS)in varying proportions of 1.5%,2%,2.5%,3.5%,and 4.5%was utilized to prepare geopolymer binders using sodium and potassium-based alkali activators.Furthermore,unconfined compressive strength(UCS)and direct shear tests were conducted to examine the strength development of clayey soil stabilized with AASS.While the study presented some intriguing results,we have identified critical concerns regarding(i)the selection of SS as a precursor for alkali activation,(ii)technical inconsistencies associated with the compaction characteristics and microstructural analysis,and(iii)the feasibility of the proposed methodology for practical applications.Through our discussion,we seek to highlight these issues and provide constructive feedback to advance the understanding of alkali activation processes and their implications for soil stabilization.展开更多
Among their several unique properties,the high electrical conductivity and mechanical strength of carbon nanofibers make them suitable for applications such as catalyst support for fuel cells,flexible electrode materi...Among their several unique properties,the high electrical conductivity and mechanical strength of carbon nanofibers make them suitable for applications such as catalyst support for fuel cells,flexible electrode materials for secondary batteries,and sensors.However,their performance requires improvement for practical applications.Several methods have been pursued to achieve this,such as growing carbon nanotubes from carbon nanofibers;however,the transition metal catalyst used to grow carbon nanotubes causes problems,including side reactions.This study attempts to address this issue by growing numerous branched carbon nanofibers from the main carbon nanofibers using alkali metals.Excellent electrical conductivity is achieved by growing densely branched carbon nanofibers.Consequently,a current collector,binder,and conductive material-free anode material is realized,exhibiting excellent electrochemical performance compared with existing carbon nanofibers.The proposed method is expected to be a powerful tool for secondary batteries and have broad applicability to various fields.展开更多
The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating so...The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating soot particles is post-treatment technology.Preparation of economically viable and highly active soot combustion catalysts is a pivotal element of post-treatment technology.In this study,different single-metal oxide catalysts with fibrous structures and alkali metal-modified hollow nanotubular Mn-based oxide catalysts were synthesized using centrifugal spinning method.Activity evaluation results showed that the manganese oxide catalyst has the best catalytic activity among the prepared single-metal oxide catalysts.Further research on alkali metal modification showed that doping alkali metals is beneficial for improving the oxidation state of manganese and generating a large number of reactive oxygen species.Combined with the structural effect brought by the hollow nanotube structure,the alkali metal-modified Mn-based oxide catalysts exhibit superior catalytic performance.Among them,the Cs-modified Mn-based oxide catalyst exhibits the best catalytic performance because of its rich active oxygen species,excellent NO oxidation ability,abundant Mn^(4+)ions(M^(n4)+/Mn^(n+)=64.78%),and good redox ability.The T_(10),T_(50),T_(90),and CO_(2)selectivity of the Cs-modified Mn-based oxide catalyst were 267°C,324°C,360°C,and 97.8%,respectively.展开更多
Co-associated rare earth elements(lanthanide and yttrium,REY)in coal and its by-products have been considered important potential nontraditional rare earth sources.In this study,a coal gangue sample collected from a c...Co-associated rare earth elements(lanthanide and yttrium,REY)in coal and its by-products have been considered important potential nontraditional rare earth sources.In this study,a coal gangue sample collected from a coal processing plant in Jinsha County of Guizhou Province,southwest China,was used as the research object.The content,modes of occurrence,and extraction(acid leaching after pretreatment of selective grinding,tailings discarding,and alkali roasting)of REY from the sample were analyzed.The result shows that the content of REY(1038.26μg/g)in pyrite and quartz is low but mainly enriched in kaolinite.Under the following conditions of a filling ratio of 40%(grinding media steel ball)and grinding time of 8 min,selective grinding pretreatment is applied to achieve 176.95μg/g(yield 24.08%)and 1104.93μg/g(yield 75.92%)of REY in+2 mm and-2 mm fractions,respectively.Thus,the-2 mm coal gangue fraction is selected,used as the feed,and roasted and leached with HCl.When Na_(2)CO_(3)and NaCl are separately used as roasting activators,the REY leaching ratios are 91.41%and 68.88%,respectively,under the optimum conditions.The contents of REY in the final leachate are 1010.02 and 761.08μg/g when Na_(2)CO_(3)and NaCl are used,respectively.The two REY contents are relatively higher than the impurity ions in the leachate,which facilitates further REY separation.The mechanism study reveals that high-temperature roasting increases the pore size and the total pore area of the gangue,which promotes leachate penetration and improves reaction efficiency.In addition,roasting facilitates the reaction between the sodium salt activator and kaolinite and other aluminosilicate minerals in the coal gangue to generate soluble salts,thus releasing REY into the solution.The appropriate roasting temperature transforms the activator into a molten state.Thus,the reaction between coal gangue and activator is a solid-liquid reaction rather than a solid-solid reaction,which improves the efficiency of the chemical reaction.展开更多
Sulfur trioxide(SO_(3))as a condensable particle matter has a significant influence on atmospheric visibility,which easily arouses formation of haze.It is imperative to control the SO_(3)emission from the industrial f...Sulfur trioxide(SO_(3))as a condensable particle matter has a significant influence on atmospheric visibility,which easily arouses formation of haze.It is imperative to control the SO_(3)emission from the industrial flue gas.Three commonly used basic absorbents,including Ca(OH)_(2),MgO and NaHCO_(3)were selected to explore the effects of temperature,SO_(2)concentration on the SO_(3)absorption,and the reaction mechanism of SO_(3)absorption was further illustrated.The suitable reaction temperature for various absorbents were proposed,Ca(OH)_(2)at the high temperatures above 500°C,MgO at the low temperatures below 320°C,and NaHCO_(3)at the temperature range of 320–500°C.The competitive absorption between SO_(2)and SO_(3)was found that the addition of SO_(2)reduced the SO_(3)absorption on Ca(OH)_(2)and NaHCO_(3),while had no effect on MgO.The order of the absorption selectivity of SO_(3)follows MgO,NaHCO_(3)and Ca(OH)_(2)under the given conditions in this work.The absorption process of SO_(3)on NaHCO_(3)follows the shrinking core model,thus the absorption reaction continues until NaHCO_(3)was exhausted with the utilization rate of nearly 100%.The absorption process of SO_(3)on Ca(OH)_(2)and MgO follows the grain model,and the dense product layer hinders the further absorption reaction,resulting in low utilization of about 50%for Ca(OH)_(2)and MgO.The research provides a favorable support for the selection of alkaline absorbent for SO_(3)removal in application.展开更多
Alkali metal batteries(AMBs)have undergone substantial development in portable devices due to their high energy density and durable cycle performance.However,with the rising demand for smart wearable electronic device...Alkali metal batteries(AMBs)have undergone substantial development in portable devices due to their high energy density and durable cycle performance.However,with the rising demand for smart wearable electronic devices,a growing focus on safety and durability becomes increasingly apparent.An effective strategy to address these increased requirements involves employing the quasi-solid gel electrolytes(QSGEs).This review focuses on the application of QSGEs in AMBs,emphasizing four types of gel electrolytes and their influence on battery performance and stability.First,self-healing gels are discussed to prolong battery life and enhance safety through self-repair mechanisms.Then,flexible gels are explored for their mechanical flexibility,making them suitable for wearable devices and flexible electronics.In addition,biomimetic gels inspired by natural designs are introduced for high-performance AMBs.Furthermore,biomass materials gels are presented,derived from natural biomaterials,offering environmental friendliness and biocompatibility.Finally,the perspectives and challenges for future developments are discussed in terms of enhancing the ionic conductivity,mechanical strength,and environmental stability of novel gel materials.The review underscores the significant contributions of these QSGEs in enhancing AMBs performance,including increased lifespan,safety,and adaptability,providing new insights and directions for future research and applications in the field.展开更多
To advance the precise regulation and high-value utilization of halloysite nanotubes(HNTs),this work systematically investigated five treatment strategies,including calcination,acid treatment,alkali treatment,acid tre...To advance the precise regulation and high-value utilization of halloysite nanotubes(HNTs),this work systematically investigated five treatment strategies,including calcination,acid treatment,alkali treatment,acid treatment of calcined HNTs,and alkali treatment of calcined HNTs,to modulate their structural and application properties.The structural characteristics,surface properties,and methylene blue(MB)adsorption capacity of HNTs under multiple treatments were systematically analyzed.Calcination at varying temperatures modified the crystal structure,morphology,and surface properties of HNTs,with higher calcination temperatures reducing their reactivity towards MB.Moderate acid treatment expanded the lumen and decreased the surface potential of HNTs,significantly enhancing MB adsorption capacity.In contrast,alkali treatment dispersed the multilayered walls of HNTs and raised surface potential,reducing MB affinity.Acid treatment of calcined HNTs effectively increased their specific surface areas by leaching most of Al while maintaining the tubular structure,thereby maximizing MB adsorption.Alkali treatment of calcined HNTs destroyed the tubular structure and resulted in poor MB adsorption.HNTs pre-calcined at 600℃ for 3 h and acid-treated at 60℃ for 8 h exhibited an optimal specific surface area of443 m^(2)·g^(-1)and an MB adsorption capacity of 190 mg·g^(-1).Kinetic and Arrhenius equation fittings indicated that chemical reactions control interactions of acids and alkalis with HNTs.This study provides a comprehensive comparison and analysis of five treatment methods,offering insights into regulating the structures and surface properties of HNTs by controlling the treatment condition,thereby laying a foundation for their efficient utilization in practical applications.展开更多
The performance of roller compacted concrete(RCC)was greatly influenced by variations in material proportion,optimum moisture content,density of mixes and methodology adopted making it different from conventional conc...The performance of roller compacted concrete(RCC)was greatly influenced by variations in material proportion,optimum moisture content,density of mixes and methodology adopted making it different from conventional concrete mixes.Even though RCC has gained popularity,the complex phenomenon involved in developing the RCC mixes limits it from large-scale applications.In this study,reclaimed asphalt pavement(RAP)incorporated roller-compacted geopolymer concrete(RGC)mixes were developed herein with different compaction techniques such as vibratory hammer(VH),modified proctor(MP),vibration table(VT)and compression machine(CM)are studied and compared with control mixes of natural aggregates.Initially,the effect of alkali solutions such as sodium hydroxide(SH)and sodium silicate(SS)on the physical properties.During,the second phase mechanical properties such as dry density,compressive,flexural and split-tensile strength,modulus of elasticity and microstructure properties will be investigated.The test results revealed that compaction efforts were greatly influenced by the alkali solution.Furthermore,the poor bond characteristics between RAP and the binder matrix had a significant effect on strength properties.Also,the various compaction techniques affected the mechanical properties of mixes developed herein.In Comparison with various compaction efforts,VH and MP produced comparable results,whereas the VT method underestimated and overestimated the various strength properties.Although,the CM method reports comparable results but difficult to maintain consistency in strength aspects.Therefore,optimization of various parameters influencing the concrete properties needs to be achieved for field density.展开更多
As a potential substitute for traditional nonaqueous organic electrolytes,polymer-based solid-state electrolytes(SSEs)have the advantages of high safety,flexibility,low density,and easy processing.In contrast,they sti...As a potential substitute for traditional nonaqueous organic electrolytes,polymer-based solid-state electrolytes(SSEs)have the advantages of high safety,flexibility,low density,and easy processing.In contrast,they still face challenges,such as low room-temperature ionic conductivity,narrow electrochemical windows,and poor mechanical strength.To realize the practical application of all-solid-state alkali metal ion batteries,there has been a lot of research on modifying the chemical composition or structure of polymerbased SSEs.In this review,the transport mechanism of alkali metal ions in polymer SSEs is briefly introduced.We systematically summarize the recent strategies to improve polymer-based SSEs,which have been validated in lithium-ion batteries and sodium-ion batteries,including lamellar electrolyte structure,dual salts hybridization,oriented filler alignment,and so on.Then,taking the unique properties of potassium metal and potassium ions into consideration,the feasibility of potassium-ion batteries for practical use enabled by these novel modification methods is discussed.展开更多
Aqueous alkali metal-ion batteries(AAMIBs)have been recognized as emerging electrochemical energy storage technologies for grid-scale applications owning to their intrinsic safety,cost-effectiveness,and environmental ...Aqueous alkali metal-ion batteries(AAMIBs)have been recognized as emerging electrochemical energy storage technologies for grid-scale applications owning to their intrinsic safety,cost-effectiveness,and environmental sustainability.However,the practical application of AAMIBs is still severely constrained by the tendency of aqueous electrolytes to freeze at low temperatures and decompose at high temperatures,limiting their operational temperature range.Considering the urgent need for energy systems with higher adaptability and resilience at various application scenarios,designing novel electrolytes via structure modulation has increasingly emerged as a feasible and economical strategy for the performance optimization of wide-temperature AAMIBs.In this review,the latest advancement of wide-temperature electrolytes for AAMIBs is systematically and comprehensively summarized.Specifically,the key challenges,failure mechanisms,correlations between hydrogen bond behaviors and physicochemical properties,and thermodynamic and kinetic interpretations in aqueous electrolytes are discussed firstly.Additionally,we offer forward-looking insights and innovative design principles for developing aqueous electrolytes capable of operating across a broad temperature range.This review is expected to provide some guidance and reference for the rational design and regulation of widetemperature electrolytes for AAMIBs and promote their future development.展开更多
Delving alternative high-performance anodes for lithium-ion batteries have always attracted scientist attention.A wide-bandgap semiconductor with excellent mechanical properties,“silicon carbide(SiC)”,has been intro...Delving alternative high-performance anodes for lithium-ion batteries have always attracted scientist attention.A wide-bandgap semiconductor with excellent mechanical properties,“silicon carbide(SiC)”,has been introduced as the anode electrode.Two-dimensional SiC has special hybridization which can build it as an appropriate substitution for graphene.Energy storage technologies are keys in the extension and function of electric devices.To keep up with steady innovations in saving energy technologies,it is essential to progress corresponding practical strategies.In this research article,SiC has been designed and characterized as an anode electrode for lithium(Li),sodium(Na),beryllium(Be),and magnesium(Mg)ion batteries,forming SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C nanoclusters.A comprehensive study of energy-saving by SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C complexes was conducted using computational methods,accompanied by analysis of charge density differences(CDD),total density of states(TDOS),and localized orbital locator(LOL)for hybrid clusters of SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C.Functionalizing lithium,sodium,beryllium,and magnesium can shift the negative charge distribution of carbon toward electron-acceptor states in SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C nanoclusters.Higher Si/C content can increase battery capacity via SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C nanoclusters during the energy storage process and improve rate performance by enhancing electrical conductivity.Besides,silicon carbide anode material may improve cycling consistency by mitigating electrode degradation,and it augments capacity owing to higher surface capacitance.展开更多
Chitin,distinguished by its nitrogen-rich acetamido and amino groups,imparts a distinctive cationic nature,enabling chitin to have indispensable features in various applications.Despite its significant promise in the ...Chitin,distinguished by its nitrogen-rich acetamido and amino groups,imparts a distinctive cationic nature,enabling chitin to have indispensable features in various applications.Despite its significant promise in the textile industry,particularly for sustainable and functional fabric applications,the practical utilization of chitin fibers remains constrained by insufficient mechanical strength.The degree of deacetylation(DD),a key molecular-level structural determinant,has not been adequately addressed in previous studies despite its critical role in influencing chitin properties across multiple scales.In this study,a deacetylation-mediated design strategy was used to achieve enhanced mechanical performance coupled with multifunctional efficacy using an aqueous KOH/urea solution dissolution system.We prepared a series of deacetylated chitins with different DD values and systematically studied the effect of deacetylation on the multiple-scale structure of regenerated fibers,such as intermolecular interactions and chain orientation at the molecular level,and the aggregation behavior of chitin nanofibers within the gel-state and dried fibers at the micro/nano scale.To achieve an enhanced mechanical performance coupled with multifunctional efficacy by relying on an aqueous KOH/urea solution dissolution system.Moreover,deacetylation enhances intermolecular interactions,resulting in densified internal structures and improved fiber orientation.Concomitantly,it augmented the antimicrobial functionality of the fibers.This deacetylation-mediated design strategy provides a deeper understanding of the structure and properties of regenerated chitin and advances the utility of chitin in strong and sustainable fibers.展开更多
Recent advancements have led to the synthesis of various new metal-containing explosives,particularly energetic metal-organic frameworks(EMOFs),which feature high-energy ligands within well-ordered crystalline structu...Recent advancements have led to the synthesis of various new metal-containing explosives,particularly energetic metal-organic frameworks(EMOFs),which feature high-energy ligands within well-ordered crystalline structures.These explosives exhibit significant advantages over traditional compounds,including higher density,greater heats of detonation,improved mechanical hardness,and excellent thermal stability.To effectively evaluate their detonation performance,it is crucial to have a reliable method for predicting detonation heat,velocity,and pressure.This study leverages experimental data and outputs from the leading commercial computer code to identify suitable decomposition pathways for different metal oxides,facilitating straightforward calculations for the detonation performance of alkali metal salts,and metal coordination compounds,along with EMOFs.The new model enhances predictive reliability for detonation velocities,aligning more closely with experimental results,as evi-denced by a root mean square error(RMSE)of 0.68 km/s compared to 1.12 km/s for existing methods.Furthermore,it accommodates a broader range of compounds,including those containing Sr,Cd,and Ag,and provides predictions for EMOFs that are more consistent with computer code outputs than previous predictive models.展开更多
Noteworthy challenges such as severe side reactions,interfacial instability,and dendrite growth have plagued rechargeable alkali metal batteries for a long time.Alleviating the plight necessitates innovative membranes...Noteworthy challenges such as severe side reactions,interfacial instability,and dendrite growth have plagued rechargeable alkali metal batteries for a long time.Alleviating the plight necessitates innovative membranes capable of modulating ion transport and establishing stable interfaces.The exploration of implemented membranes with thermal/mechanical and electrochemical stability is crucial for achieving high-performance and safe alkali metal batteries.Crystalline covalent organic framework(COF)membranes have emerged as promising materials for next-generation energy storage systems due to their tunable porosity and exceptional physicochemical properties.This review specifically examines the critical role of COF membranes in enabling sustainable alkali metal(Li/Na/K)batteries,with a particular focus on design principles,performance advantages,and key challenges of COF membranes.The discussion emphasizes structure-property relationships specifically relevant to rechargeable battery applications,supported by recent decades of research.Impressively,this mini review further identifies three critical research frontiers:reticular chemistry-guided materials design,multifunctional composite architectures,and in-situ characterization techniques.This targeted analysis provides actionable insights for developing COF membranes that address the fundamental limitations of current alkali metal battery technologies.展开更多
基金supported by the Key Research and Development Special Tasks of Xinjiang,China (No.2022B01051-2)the National Natural Science Foundation of China (Nos.U23B2091,42372328,and 52478253)+1 种基金the Natural Science Foundation of Jiangsu Province,China (No.BK20240209)the Science and Technology Program Special Fund of Jiangsu Province (Frontier Leading Technology Basic Research) Major projects,China (No.BK 20222004)
文摘Using cemented rockfill to replace coal pillars offers an effective solution for reducing solid waste while ensuring the safety of gob-side entries.However,achieving the balance among low cost,high waste recycling rates,and adequate strength remains a significant challenge for cemented rockfill.This study used a composite alkali activator to activate gangue cemented rockfill.The compressive strength,scanning electron microscopy,energy dispersive spectrometer,mercury intrusion porosimetry,X-ray diffraction,and thermogra-vimetric tests were carried out to investigate the effect of the composite alkali activator proportion on the compressive strength,micro-structure,and composition of the cemented rockfill.The calcium silicate hydrate(C–S–H)molecular model of cemented rockfill was con-structed to explore the fracture evolution of the nucleated molecular structure under tension.The results show that compressive strength initially increased and then decreased with the activator proportion,the optimal activator proportion of 1:2 resulted in a 31.25%increase in strength at 3 d.This reasonable activator proportion strengthens the pozzolanic effect of gangue,and consumes more calcium hydroxide to inhibit its agglomeration,ultimately achieving the densification of microstructure.The activator proportion inevitably substitutes calcium ions with sodium ions in the C–S–H molecular model.The 12%substitution of calcium ions increases the adhesion between silicon chain layers,which is beneficial to the interlayer stress transfer.This work proposes a method for preparing low-cost cemented rockfill from al-kali-activated gangue,which can be used for solid waste recycling and reducing cement consumption to achieve low-carbon goals.
基金the support provided by the National Natural Science Foundation of China(Grant Nos.52278336 and 42302032)Guangdong Basic and Applied Research Foundation(Grant Nos.2023B1515020061).
文摘Granite residual soil (GRS) is a type of weathering soil that can decompose upon contact with water, potentially causing geological hazards. In this study, cement, an alkaline solution, and glass fiber were used to reinforce GRS. The effects of cement content and SiO_(2)/Na2O ratio of the alkaline solution on the static and dynamic strengths of GRS were discussed. Microscopically, the reinforcement mechanism and coupling effect were examined using X-ray diffraction (XRD), micro-computed tomography (micro-CT), and scanning electron microscopy (SEM). The results indicated that the addition of 2% cement and an alkaline solution with an SiO_(2)/Na2O ratio of 0.5 led to the densest matrix, lowest porosity, and highest static compressive strength, which was 4994 kPa with a dynamic impact resistance of 75.4 kN after adding glass fiber. The compressive strength and dynamic impact resistance were a result of the coupling effect of cement hydration, a pozzolanic reaction of clay minerals in the GRS, and the alkali activation of clay minerals. Excessive cement addition or an excessively high SiO_(2)/Na2O ratio in the alkaline solution can have negative effects, such as the destruction of C-(A)-S-H gels by the alkaline solution and hindering the production of N-A-S-H gels. This can result in damage to the matrix of reinforced GRS, leading to a decrease in both static and dynamic strengths. This study suggests that further research is required to gain a more precise understanding of the effects of this mixture in terms of reducing our carbon footprint and optimizing its properties. The findings indicate that cement and alkaline solution are appropriate for GRS and that the reinforced GRS can be used for high-strength foundation and embankment construction. The study provides an analysis of strategies for mitigating and managing GRS slope failures, as well as enhancing roadbed performance.
基金Project supported by the Key R&D Projects in Hunan Province(2021SK2047,2022NK2044)Science and Technology Innovation Program of Hunan Province(2022WZ1022)Superior Youth Project of the Science Research Project of Hunan Provincial Department of Education(22B0211)。
文摘The technology of solid-state lighting has developed for decades in various industries.Phosphor,as an element part,determines the application domain of lighting products.For instance,blue and redemitting phosphors are required in the process of plant supplementing light,arrow-band emitting phosphors are applied to backlight displays,etc.In this work,a Bi^(3+)-activated blue phosphor was obtained in a symmetrical and co mpact crystal structure of Gd3Sb07(GSO).Then,the co-doping strategy of alkali metal ions(Li^(+),Na^(+),and K^(+))was used to optimize the performance.The result shows that the photoluminescence intensity is increased by 2.1 times and 1.3 times respectively by introducing Li~+and K^(+)ions.Not only that,it also achieves narrow-band emitting with the full width of half-maximum(FWHM)reaching 42 nm through Na^(+)doping,and its excitation peak position also shifts from 322 to 375 nm,which can be well excited by near-ultraviolet(NUV)light emitting diode(LED)chips(365 nm).Meanwhile,the electroluminescence spectrum of GSO:0.6 mol%Bi^(3+),3 wt%Na^(+)matches up to 93.39%of the blue part of the absorption spectrum of chlorophyll a.In summary,the Bi^(3+)-activated blue phosphor reported in this work can synchronously meet the requirements of plant light replenishment and field emission displays.
基金supported by the Foundation Project of Jihua Laboratory(X200191TL200).
文摘In this study,the catalysis function of Na_(2)CO_(3) to the structural properties of xylan char was well investigated with Na_(2)CO_(3) on,and the electrochemical performance of xylan char as an anode material for sodium-ion batteries was tested.The characterization of X-ray microscopy and scanning electron microscopy demonstrated that the morphological structure of xylan char was altered due to the addition of Na_(2)CO_(3) catalyst.The increasement of the Na_(2)CO_(3)/xylan ratio resulted in a slenderization of the triangular prism shape of the char skeleton and a reduction in porosity.X-ray diffraction analysis revealed that Na_(2)CO_(3) promoted the growth of the(004)crystal plane of graphite during xylan pyrolysis,while inhibiting the formation of the(100/101)crystal planes.Raman spectroscopy analysis indicated that the presence of Na_(2)CO_(3)had changed the graphitization degree of xylan char.Electrochemical tests further showed that char prepared with a Na_(2)CO_(3)/xylan mass ratio of 1∶1 exhibited the highest sodium storage capacity.This study provides a pathway for the rational design carbon materials derived from xylan for future applications in energy storage devices.
基金partially supported by the National Key R&D Program of China(2023YFE0198900)support provided by the National Natural Science Foundation of China(52171226,22309174)。
文摘Chemical hydrogen storage in organic materials is a promising method thanks to its high storage density,reversibility,and safety.However,the dehydrogenation process of organic materials requires high temperatures due to their unfavorable thermodynamic properties.This study proposes a strategy to design a new type of hydrogen storage materials,i.e.,alkali metal pyridinolate/piperidinolate pairs,by combining the effects of a heteroatom and an alkali metal in one molecule to achieve suitable dehydrogenation thermodynamics along with high hydrogen storage capacities.These air-stable compounds can be synthesized using low-cost reactants and water as a green solvent.Thermodynamic predictions indicate that enthalpy changes of dehydrogenation(ΔH_(d))can be significantly reduced to the optimal range for efficient hydrogen release,exemplified by lithium 2-piperidinolate with a 5.6 wt%hydrogen capacity and a suitableΔH_(d)of 32.2 kJ/mol-H_(2).Experimental results obtained using sodium systems validate the computational predictions,demonstrating reversible hydrogen storage even below 100℃.The superior hydrogen desorption performance of alkali metal piperidinolates could be attributed to their suitableΔH_(d)induced by the combined effect of ring nitrogen and metal substitution on their structures.This study not only reports new low-cost hydrogen storage materials but also provides a rational design strategy for developing metalorganic compounds possessing high hydrogen capacities and suitable thermodynamics for efficient hydrogen storage.
基金the financial support from the National Natural Science Foundation of China(Nos.21971040,22171045,and 22371046)。
文摘Ln-containing polyoxoniobates(PONbs)have appealing applications in luminescence,information encryption and magnetic fields,but the synthesis of PONbs containing high-nuclearity Ln-O clusters is challenging due to the easy hydrolysis of Ln^(3+)ions in alkaline environments.In this paper,we are able to integrate CO_(3)^(2-)and high-nuclearity Ln-O clusters into PONb to construct an inorganic giant Eu_(19)-embedded PONb H_(49)K_(16)Na_(13)(H_(2)O)_(63)[Eu_(21)O_(2)(OH)_(7)(H_(2)O)_(5)(Nb_(7)O_(22))_(10)(Nb_(2)O_(6))_(2)(CO_(3))_(18)]·91H_(2)O(1),which contains the highest nuclearity Eu-O clusters and the largest number of Eu^(3+)ions among PONbs.In addition,the film that was prepared by mixing 1 with gelatin and glycerol,exhibits reversible luminescence switching behavior under acid/alkali stimulation and has been used to create a fluorescence-encoded information approach.This work paves a feasible strategy for the construction of high-nuclearity Ln-O cluster-containing PONbs and the expansion of the application of Ln-containing PONbs in information encryption.
文摘We read with great interest the investigations conducted by Pourakbar et al.(2024)on the“Stabilization of clay soil using alkali-activated sewage sludge.”The authors have investigated the feasibility of utilizing alkali-activated sewage sludge(AASS)as a binder for stabilizing the clayey soil.Sewage sludge(SS)in varying proportions of 1.5%,2%,2.5%,3.5%,and 4.5%was utilized to prepare geopolymer binders using sodium and potassium-based alkali activators.Furthermore,unconfined compressive strength(UCS)and direct shear tests were conducted to examine the strength development of clayey soil stabilized with AASS.While the study presented some intriguing results,we have identified critical concerns regarding(i)the selection of SS as a precursor for alkali activation,(ii)technical inconsistencies associated with the compaction characteristics and microstructural analysis,and(iii)the feasibility of the proposed methodology for practical applications.Through our discussion,we seek to highlight these issues and provide constructive feedback to advance the understanding of alkali activation processes and their implications for soil stabilization.
基金supported by the Ministry of Education of the Republic of Korea and the National Research Foundation of Korea(NRF2023R1A2C2004191)supported by Korea Basic Science Institute(National research Facilities and Equipment Center)grant funded by Ministry of Education(grant No.2022R1A6C101B738).
文摘Among their several unique properties,the high electrical conductivity and mechanical strength of carbon nanofibers make them suitable for applications such as catalyst support for fuel cells,flexible electrode materials for secondary batteries,and sensors.However,their performance requires improvement for practical applications.Several methods have been pursued to achieve this,such as growing carbon nanotubes from carbon nanofibers;however,the transition metal catalyst used to grow carbon nanotubes causes problems,including side reactions.This study attempts to address this issue by growing numerous branched carbon nanofibers from the main carbon nanofibers using alkali metals.Excellent electrical conductivity is achieved by growing densely branched carbon nanofibers.Consequently,a current collector,binder,and conductive material-free anode material is realized,exhibiting excellent electrochemical performance compared with existing carbon nanofibers.The proposed method is expected to be a powerful tool for secondary batteries and have broad applicability to various fields.
基金supported by National Key R&D Program of China(2022YFB3506200,2022YFB3504100)National Natural Science Foundation of China(22072095,22372107,22202058)+3 种基金Excellent Youth Science Foundation of Liaoning Province(2022-YQ-20)Shenyang Science and Technology Planning Project(22-322-3-28)Liaoning Xingliao talented youth Top talent program(XLYC2203007)University Joint Education Project for China-Central and Eastern European Countries(2021097).
文摘The soot emitted during the operation of diesel engine exhaust seriously threatens the human health and environment,so treating diesel engine exhaust is critical.At present,the most effective method for eliminating soot particles is post-treatment technology.Preparation of economically viable and highly active soot combustion catalysts is a pivotal element of post-treatment technology.In this study,different single-metal oxide catalysts with fibrous structures and alkali metal-modified hollow nanotubular Mn-based oxide catalysts were synthesized using centrifugal spinning method.Activity evaluation results showed that the manganese oxide catalyst has the best catalytic activity among the prepared single-metal oxide catalysts.Further research on alkali metal modification showed that doping alkali metals is beneficial for improving the oxidation state of manganese and generating a large number of reactive oxygen species.Combined with the structural effect brought by the hollow nanotube structure,the alkali metal-modified Mn-based oxide catalysts exhibit superior catalytic performance.Among them,the Cs-modified Mn-based oxide catalyst exhibits the best catalytic performance because of its rich active oxygen species,excellent NO oxidation ability,abundant Mn^(4+)ions(M^(n4)+/Mn^(n+)=64.78%),and good redox ability.The T_(10),T_(50),T_(90),and CO_(2)selectivity of the Cs-modified Mn-based oxide catalyst were 267°C,324°C,360°C,and 97.8%,respectively.
基金Project supported by the National Natural Science Foundation of China(51964009)。
文摘Co-associated rare earth elements(lanthanide and yttrium,REY)in coal and its by-products have been considered important potential nontraditional rare earth sources.In this study,a coal gangue sample collected from a coal processing plant in Jinsha County of Guizhou Province,southwest China,was used as the research object.The content,modes of occurrence,and extraction(acid leaching after pretreatment of selective grinding,tailings discarding,and alkali roasting)of REY from the sample were analyzed.The result shows that the content of REY(1038.26μg/g)in pyrite and quartz is low but mainly enriched in kaolinite.Under the following conditions of a filling ratio of 40%(grinding media steel ball)and grinding time of 8 min,selective grinding pretreatment is applied to achieve 176.95μg/g(yield 24.08%)and 1104.93μg/g(yield 75.92%)of REY in+2 mm and-2 mm fractions,respectively.Thus,the-2 mm coal gangue fraction is selected,used as the feed,and roasted and leached with HCl.When Na_(2)CO_(3)and NaCl are separately used as roasting activators,the REY leaching ratios are 91.41%and 68.88%,respectively,under the optimum conditions.The contents of REY in the final leachate are 1010.02 and 761.08μg/g when Na_(2)CO_(3)and NaCl are used,respectively.The two REY contents are relatively higher than the impurity ions in the leachate,which facilitates further REY separation.The mechanism study reveals that high-temperature roasting increases the pore size and the total pore area of the gangue,which promotes leachate penetration and improves reaction efficiency.In addition,roasting facilitates the reaction between the sodium salt activator and kaolinite and other aluminosilicate minerals in the coal gangue to generate soluble salts,thus releasing REY into the solution.The appropriate roasting temperature transforms the activator into a molten state.Thus,the reaction between coal gangue and activator is a solid-liquid reaction rather than a solid-solid reaction,which improves the efficiency of the chemical reaction.
基金supported by the National Natural Science Foundation of China(No.52000172)the National Key R&D Program of China(Nos.2017YFB0304300 and 2017YFB0304303).
文摘Sulfur trioxide(SO_(3))as a condensable particle matter has a significant influence on atmospheric visibility,which easily arouses formation of haze.It is imperative to control the SO_(3)emission from the industrial flue gas.Three commonly used basic absorbents,including Ca(OH)_(2),MgO and NaHCO_(3)were selected to explore the effects of temperature,SO_(2)concentration on the SO_(3)absorption,and the reaction mechanism of SO_(3)absorption was further illustrated.The suitable reaction temperature for various absorbents were proposed,Ca(OH)_(2)at the high temperatures above 500°C,MgO at the low temperatures below 320°C,and NaHCO_(3)at the temperature range of 320–500°C.The competitive absorption between SO_(2)and SO_(3)was found that the addition of SO_(2)reduced the SO_(3)absorption on Ca(OH)_(2)and NaHCO_(3),while had no effect on MgO.The order of the absorption selectivity of SO_(3)follows MgO,NaHCO_(3)and Ca(OH)_(2)under the given conditions in this work.The absorption process of SO_(3)on NaHCO_(3)follows the shrinking core model,thus the absorption reaction continues until NaHCO_(3)was exhausted with the utilization rate of nearly 100%.The absorption process of SO_(3)on Ca(OH)_(2)and MgO follows the grain model,and the dense product layer hinders the further absorption reaction,resulting in low utilization of about 50%for Ca(OH)_(2)and MgO.The research provides a favorable support for the selection of alkaline absorbent for SO_(3)removal in application.
基金support from the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Yangzhou University)(KYCX23_3508)the Yangzhou University International Academic Exchange Fund.Prof.Guoxiu Wang acknowledges the Australian Research Council(ARC)Linkage project(LP200200926).
文摘Alkali metal batteries(AMBs)have undergone substantial development in portable devices due to their high energy density and durable cycle performance.However,with the rising demand for smart wearable electronic devices,a growing focus on safety and durability becomes increasingly apparent.An effective strategy to address these increased requirements involves employing the quasi-solid gel electrolytes(QSGEs).This review focuses on the application of QSGEs in AMBs,emphasizing four types of gel electrolytes and their influence on battery performance and stability.First,self-healing gels are discussed to prolong battery life and enhance safety through self-repair mechanisms.Then,flexible gels are explored for their mechanical flexibility,making them suitable for wearable devices and flexible electronics.In addition,biomimetic gels inspired by natural designs are introduced for high-performance AMBs.Furthermore,biomass materials gels are presented,derived from natural biomaterials,offering environmental friendliness and biocompatibility.Finally,the perspectives and challenges for future developments are discussed in terms of enhancing the ionic conductivity,mechanical strength,and environmental stability of novel gel materials.The review underscores the significant contributions of these QSGEs in enhancing AMBs performance,including increased lifespan,safety,and adaptability,providing new insights and directions for future research and applications in the field.
基金Tural Science Foundation of China(No.52274255)the Young Scientists Fund of the National Natural ScienceFoundation of China(No.52404276)+3 种基金Fundamental Re-search Funds for the Central Universities,China(Nos.N2301003,N2201008,N2201004,and N2301025)Liaon-ingRevitalizationTalentsProgram,China(No.XLYC2202028)Postdoctoral Foundation of NortheasternUniversity,Young Elite Scientists Sponsorship Program byChina Association for Science and Technology(No.2022QNRC001)and China Postdoctoral Science Founda-tion(No.2022M720025)。
文摘To advance the precise regulation and high-value utilization of halloysite nanotubes(HNTs),this work systematically investigated five treatment strategies,including calcination,acid treatment,alkali treatment,acid treatment of calcined HNTs,and alkali treatment of calcined HNTs,to modulate their structural and application properties.The structural characteristics,surface properties,and methylene blue(MB)adsorption capacity of HNTs under multiple treatments were systematically analyzed.Calcination at varying temperatures modified the crystal structure,morphology,and surface properties of HNTs,with higher calcination temperatures reducing their reactivity towards MB.Moderate acid treatment expanded the lumen and decreased the surface potential of HNTs,significantly enhancing MB adsorption capacity.In contrast,alkali treatment dispersed the multilayered walls of HNTs and raised surface potential,reducing MB affinity.Acid treatment of calcined HNTs effectively increased their specific surface areas by leaching most of Al while maintaining the tubular structure,thereby maximizing MB adsorption.Alkali treatment of calcined HNTs destroyed the tubular structure and resulted in poor MB adsorption.HNTs pre-calcined at 600℃ for 3 h and acid-treated at 60℃ for 8 h exhibited an optimal specific surface area of443 m^(2)·g^(-1)and an MB adsorption capacity of 190 mg·g^(-1).Kinetic and Arrhenius equation fittings indicated that chemical reactions control interactions of acids and alkalis with HNTs.This study provides a comprehensive comparison and analysis of five treatment methods,offering insights into regulating the structures and surface properties of HNTs by controlling the treatment condition,thereby laying a foundation for their efficient utilization in practical applications.
文摘The performance of roller compacted concrete(RCC)was greatly influenced by variations in material proportion,optimum moisture content,density of mixes and methodology adopted making it different from conventional concrete mixes.Even though RCC has gained popularity,the complex phenomenon involved in developing the RCC mixes limits it from large-scale applications.In this study,reclaimed asphalt pavement(RAP)incorporated roller-compacted geopolymer concrete(RGC)mixes were developed herein with different compaction techniques such as vibratory hammer(VH),modified proctor(MP),vibration table(VT)and compression machine(CM)are studied and compared with control mixes of natural aggregates.Initially,the effect of alkali solutions such as sodium hydroxide(SH)and sodium silicate(SS)on the physical properties.During,the second phase mechanical properties such as dry density,compressive,flexural and split-tensile strength,modulus of elasticity and microstructure properties will be investigated.The test results revealed that compaction efforts were greatly influenced by the alkali solution.Furthermore,the poor bond characteristics between RAP and the binder matrix had a significant effect on strength properties.Also,the various compaction techniques affected the mechanical properties of mixes developed herein.In Comparison with various compaction efforts,VH and MP produced comparable results,whereas the VT method underestimated and overestimated the various strength properties.Although,the CM method reports comparable results but difficult to maintain consistency in strength aspects.Therefore,optimization of various parameters influencing the concrete properties needs to be achieved for field density.
基金Fundamental Research Funds for the Central Universities,Grant/Award Number:FRF-IDRY-21-013National Natural Science Foundation of China,Grant/Award Numbers:52371131,52474318+1 种基金Beijing Nova Program,Grant/Award Number:Z211100002121082State Key Laboratory of Explosion Science and Technology,Grant/Award Number:QNKT23-05。
文摘As a potential substitute for traditional nonaqueous organic electrolytes,polymer-based solid-state electrolytes(SSEs)have the advantages of high safety,flexibility,low density,and easy processing.In contrast,they still face challenges,such as low room-temperature ionic conductivity,narrow electrochemical windows,and poor mechanical strength.To realize the practical application of all-solid-state alkali metal ion batteries,there has been a lot of research on modifying the chemical composition or structure of polymerbased SSEs.In this review,the transport mechanism of alkali metal ions in polymer SSEs is briefly introduced.We systematically summarize the recent strategies to improve polymer-based SSEs,which have been validated in lithium-ion batteries and sodium-ion batteries,including lamellar electrolyte structure,dual salts hybridization,oriented filler alignment,and so on.Then,taking the unique properties of potassium metal and potassium ions into consideration,the feasibility of potassium-ion batteries for practical use enabled by these novel modification methods is discussed.
基金supported by the National Natural Science Foundation of China(52002297)National Key R&D Program of China(2022VFB2404800)+1 种基金Wuhan Yellow Crane Talents Program,China Postdoctoral Science Foundation(No.2024M752495)the Postdoctoral Fellowship Program of CPSF(No.GZB20230552).
文摘Aqueous alkali metal-ion batteries(AAMIBs)have been recognized as emerging electrochemical energy storage technologies for grid-scale applications owning to their intrinsic safety,cost-effectiveness,and environmental sustainability.However,the practical application of AAMIBs is still severely constrained by the tendency of aqueous electrolytes to freeze at low temperatures and decompose at high temperatures,limiting their operational temperature range.Considering the urgent need for energy systems with higher adaptability and resilience at various application scenarios,designing novel electrolytes via structure modulation has increasingly emerged as a feasible and economical strategy for the performance optimization of wide-temperature AAMIBs.In this review,the latest advancement of wide-temperature electrolytes for AAMIBs is systematically and comprehensively summarized.Specifically,the key challenges,failure mechanisms,correlations between hydrogen bond behaviors and physicochemical properties,and thermodynamic and kinetic interpretations in aqueous electrolytes are discussed firstly.Additionally,we offer forward-looking insights and innovative design principles for developing aqueous electrolytes capable of operating across a broad temperature range.This review is expected to provide some guidance and reference for the rational design and regulation of widetemperature electrolytes for AAMIBs and promote their future development.
文摘Delving alternative high-performance anodes for lithium-ion batteries have always attracted scientist attention.A wide-bandgap semiconductor with excellent mechanical properties,“silicon carbide(SiC)”,has been introduced as the anode electrode.Two-dimensional SiC has special hybridization which can build it as an appropriate substitution for graphene.Energy storage technologies are keys in the extension and function of electric devices.To keep up with steady innovations in saving energy technologies,it is essential to progress corresponding practical strategies.In this research article,SiC has been designed and characterized as an anode electrode for lithium(Li),sodium(Na),beryllium(Be),and magnesium(Mg)ion batteries,forming SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C nanoclusters.A comprehensive study of energy-saving by SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C complexes was conducted using computational methods,accompanied by analysis of charge density differences(CDD),total density of states(TDOS),and localized orbital locator(LOL)for hybrid clusters of SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C.Functionalizing lithium,sodium,beryllium,and magnesium can shift the negative charge distribution of carbon toward electron-acceptor states in SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C nanoclusters.Higher Si/C content can increase battery capacity via SiLi_(2)C,SiNa_(2)C,SiBe_(2)C,and SiMg_(2)C nanoclusters during the energy storage process and improve rate performance by enhancing electrical conductivity.Besides,silicon carbide anode material may improve cycling consistency by mitigating electrode degradation,and it augments capacity owing to higher surface capacitance.
文摘Chitin,distinguished by its nitrogen-rich acetamido and amino groups,imparts a distinctive cationic nature,enabling chitin to have indispensable features in various applications.Despite its significant promise in the textile industry,particularly for sustainable and functional fabric applications,the practical utilization of chitin fibers remains constrained by insufficient mechanical strength.The degree of deacetylation(DD),a key molecular-level structural determinant,has not been adequately addressed in previous studies despite its critical role in influencing chitin properties across multiple scales.In this study,a deacetylation-mediated design strategy was used to achieve enhanced mechanical performance coupled with multifunctional efficacy using an aqueous KOH/urea solution dissolution system.We prepared a series of deacetylated chitins with different DD values and systematically studied the effect of deacetylation on the multiple-scale structure of regenerated fibers,such as intermolecular interactions and chain orientation at the molecular level,and the aggregation behavior of chitin nanofibers within the gel-state and dried fibers at the micro/nano scale.To achieve an enhanced mechanical performance coupled with multifunctional efficacy by relying on an aqueous KOH/urea solution dissolution system.Moreover,deacetylation enhances intermolecular interactions,resulting in densified internal structures and improved fiber orientation.Concomitantly,it augmented the antimicrobial functionality of the fibers.This deacetylation-mediated design strategy provides a deeper understanding of the structure and properties of regenerated chitin and advances the utility of chitin in strong and sustainable fibers.
基金the research committee at Malek Ashtar University of Technology (MUT) for their invaluable support of this project
文摘Recent advancements have led to the synthesis of various new metal-containing explosives,particularly energetic metal-organic frameworks(EMOFs),which feature high-energy ligands within well-ordered crystalline structures.These explosives exhibit significant advantages over traditional compounds,including higher density,greater heats of detonation,improved mechanical hardness,and excellent thermal stability.To effectively evaluate their detonation performance,it is crucial to have a reliable method for predicting detonation heat,velocity,and pressure.This study leverages experimental data and outputs from the leading commercial computer code to identify suitable decomposition pathways for different metal oxides,facilitating straightforward calculations for the detonation performance of alkali metal salts,and metal coordination compounds,along with EMOFs.The new model enhances predictive reliability for detonation velocities,aligning more closely with experimental results,as evi-denced by a root mean square error(RMSE)of 0.68 km/s compared to 1.12 km/s for existing methods.Furthermore,it accommodates a broader range of compounds,including those containing Sr,Cd,and Ag,and provides predictions for EMOFs that are more consistent with computer code outputs than previous predictive models.
基金supported by the National Natural Science Foundation of China(22171136,52202138)the Natural Science Foundation of Jiangsu Province(BK20200472,BK20220079)+3 种基金the Medical Innovation and Development Project of Lanzhou University(lzuyxcx-2022-156)CAMS Innovation Fund for Medical Sciences(CIFMS,2019-I2M-5-074,2021-I2M-1-026,2021-I2M-3-001)the Frontier Technologies R&D Program of Jiangsu(Grant no.BF2024033)G.Z.acknowledges the support of the Thousand Young Talent Plan.
文摘Noteworthy challenges such as severe side reactions,interfacial instability,and dendrite growth have plagued rechargeable alkali metal batteries for a long time.Alleviating the plight necessitates innovative membranes capable of modulating ion transport and establishing stable interfaces.The exploration of implemented membranes with thermal/mechanical and electrochemical stability is crucial for achieving high-performance and safe alkali metal batteries.Crystalline covalent organic framework(COF)membranes have emerged as promising materials for next-generation energy storage systems due to their tunable porosity and exceptional physicochemical properties.This review specifically examines the critical role of COF membranes in enabling sustainable alkali metal(Li/Na/K)batteries,with a particular focus on design principles,performance advantages,and key challenges of COF membranes.The discussion emphasizes structure-property relationships specifically relevant to rechargeable battery applications,supported by recent decades of research.Impressively,this mini review further identifies three critical research frontiers:reticular chemistry-guided materials design,multifunctional composite architectures,and in-situ characterization techniques.This targeted analysis provides actionable insights for developing COF membranes that address the fundamental limitations of current alkali metal battery technologies.
