Multilayer piezoelectric stack actuators are widely used in many industrial applications and the investigation on the dynamic behavior of this element is needed. In this study, two optical interferometric techniques c...Multilayer piezoelectric stack actuators are widely used in many industrial applications and the investigation on the dynamic behavior of this element is needed. In this study, two optical interferometric techniques called amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV) are used to experimentally investigate the vibration characteristics of a single-layer piezoelectric disc and a multilayer piezoelectric stack actuator. These two techniques are full-field measurement for AF-ESPI and point-wise displacement measurement for LDV. Because the clear fringe patterns obtained by the AF-ESPI method will be shown only at resonant frequencies, both the resonant frequencies and corresponding vibration mode shapes of the piezoelectric disc and the multilayer piezoelectric stack actuator are obtained simultaneously by the AF-ESPI method. Interferometric fringe patterns for both the in-plane and out-of-plane vibration mode shapes are demonstrated. In addition to the proposed two optical techniques, numerical computations based on a commercially available finite element package are presented for comparison with the experimental results. Good agreement between the measured data by experimental methods and the numerical results predicted by FEM is found in resonant frequencies and mode shapes for the single-layer piezoelectric disc. However, some discrepancies are observed for the results obtained by AF-ESPI and impedance analysis for the multilayer piezoelectric stack actuator. A detailed discussion is made to address important issues of this problem.展开更多
文摘Multilayer piezoelectric stack actuators are widely used in many industrial applications and the investigation on the dynamic behavior of this element is needed. In this study, two optical interferometric techniques called amplitude-fluctuation electronic speckle pattern interferometry (AF-ESPI) and laser Doppler vibrometer (LDV) are used to experimentally investigate the vibration characteristics of a single-layer piezoelectric disc and a multilayer piezoelectric stack actuator. These two techniques are full-field measurement for AF-ESPI and point-wise displacement measurement for LDV. Because the clear fringe patterns obtained by the AF-ESPI method will be shown only at resonant frequencies, both the resonant frequencies and corresponding vibration mode shapes of the piezoelectric disc and the multilayer piezoelectric stack actuator are obtained simultaneously by the AF-ESPI method. Interferometric fringe patterns for both the in-plane and out-of-plane vibration mode shapes are demonstrated. In addition to the proposed two optical techniques, numerical computations based on a commercially available finite element package are presented for comparison with the experimental results. Good agreement between the measured data by experimental methods and the numerical results predicted by FEM is found in resonant frequencies and mode shapes for the single-layer piezoelectric disc. However, some discrepancies are observed for the results obtained by AF-ESPI and impedance analysis for the multilayer piezoelectric stack actuator. A detailed discussion is made to address important issues of this problem.
