Synergy strategy of photocatalysts and polymer resins are promising technology for marine antifouling.However,it is still a main challenge to obtain a green,safe,and efficient antifouling coatings.Herein,carbon(graphe...Synergy strategy of photocatalysts and polymer resins are promising technology for marine antifouling.However,it is still a main challenge to obtain a green,safe,and efficient antifouling coatings.Herein,carbon(graphene or CNT)modified Ti O_(2)photocatalyst was synthesized via hydrothermal and annealing process and has successfully applied in acrylate fluoroboron polymer(ABFP)composite coating.Morphology and chemical composition were detailed characterized.The graphene or CNT acted as a bridge with supplemental spatial structures(petal gaps,entanglement)and new functional groups(C-O,C-Ti-O,etc.)on Ti O_(2)particle.Carbon nanotube(CNT)modified TiO_(2)-ABFP coatings(BTCP)achieved excellent antibacterial and anti-diatom adhesion rate of 89.3%-96.70%and 99.00%-99.50%,which was 1.84-4.94-fold more than that of the single ABFP.CNT or graphene served as electronic bridges was considered as the crucial mechanism,which significantly improved the light absorption range and capacity,conductivity,and photoelectric response of Ti O_(2),and further accelerated the generation and transfer of free radicals to the surface of BTCP or FTGP.Moreover,the improvement of catalyst activity synergizes with the smooth surface,hydrophilicity,and slow hydrolysis of composite coatings,achieved long-term and efficient antifouling performance.This work provides a new insight into the modification of Ti O_(2)and antifouling mechanism of polymer coating.展开更多
A novel composite material,Poly(IL-AA)@MIL-101(Cr),combining metal-organic framework,polymeric ionic liquid and acrylic acid,was synthesized for the selective and efficient adsorption of rare earths europium(Ⅲ)(Eu3+)...A novel composite material,Poly(IL-AA)@MIL-101(Cr),combining metal-organic framework,polymeric ionic liquid and acrylic acid,was synthesized for the selective and efficient adsorption of rare earths europium(Ⅲ)(Eu3+).Characterization of the materials was carried out using techniques such as X-ray diffraction(XRD),Fourier transform infrared(FTIR),scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDS),thermogravimetric analysis(TGA)and Brunauer-Emmett-Teller(BET).The results demonstrate successful incorporation of the polymeric ionic liquid onto the material surface while preserving the crystal structure and mo rphology of MIL-101(Cr).Adsorption experiments were conducted to explore parameters including equilibrium pH,initial Eu3+concentration,and duration,with comprehensive analyses of adsorption kinetics,isotherms,and mechanisms.Findings reveal that Poly(IL1-AA)@MIL-101(Cr),Poly(IL3-AA)@MIL-101(Cr),and Poly(IL5-AA)@MIL-101(Cr)achieve adsorption equilibrium for Eu3+at approximately 9 h with an equilibrium pH of 6.2.The adso rption of Eu^(3+)predominantly follows a pseudo-second-order kinetic model and Langmuir isotherm adsorption model.Moreover,the prepared composite material exhibits superior adsorption selectivity for Eu^(3+)over other metal ions in the mixture(K^(+),Mg^(2+),Ni^(2+),Co^(2+),Zn^(2+),La^(3+),and Nd^(3+)).Even after five adsorption-desorption cycles,the composite material maintains satis factory adsorption performance.展开更多
Modified activated carbons(AS)were fabricated through the oxidation effect of ammonium persulfate and applied to the dynamic adsorption of different acrylate gas.The pore structures,surface chemical properties and sur...Modified activated carbons(AS)were fabricated through the oxidation effect of ammonium persulfate and applied to the dynamic adsorption of different acrylate gas.The pore structures,surface chemical properties and surface morphology of AS were respectively characterized by N2 adsorption,Boehm titration,X-ray Photoelectron Spectroscopy(XPS)and scanning electron microscopy(SEM)techniques.After modification,the specific surface area increased from 954 to 1154 m^(2)·g^(-1).The contents of oxygen-containing functional groups on the AS surface increase obviously and have a great effect on the adsorption behavior of acrylate gases.According to the results of dynamic adsorption,the adsorption capacities of acrylates are as the following order:methyl acrylate(461.9 mg·g^(-1))>methyl methacrylate(436.9 mg·g^(-1))>butyl acrylate(381.8 mg·g^(-1)),which is attributed to the size adaptability of AS pores and acrylates.The adsorption behavior of AS for acrylate gases conforms to the Bangham model and the Temkin model.展开更多
Grafting of acrylic acid (AAc) and acrylamide (AAm) onto preirradiated PP film was performed in aqueous solution of AAc and AAm, respectively. Electron beam accelerator was used as irradiation source. The effect of f...Grafting of acrylic acid (AAc) and acrylamide (AAm) onto preirradiated PP film was performed in aqueous solution of AAc and AAm, respectively. Electron beam accelerator was used as irradiation source. The effect of ferrous sulfate, sodium nitrate, methanol and glucose on the degree of grafting was demonstrated. The function of the different additives was compared by the grafting of different monomers (AAc and AAm). The results show that the four of these additives are elective on the grafting of AAc. Only two of these additives, ferrous sulfate and methanol were effective on the grafting of AAm.展开更多
Flexible wearable electronic devices based on hydrogels have immense potential in a wide range of applications.However,many existing strain sensors suffer from significant limitations including poor mechanical propert...Flexible wearable electronic devices based on hydrogels have immense potential in a wide range of applications.However,many existing strain sensors suffer from significant limitations including poor mechanical properties,low adhesion,and insufficient conductivity.To address these challenges,this study successfully developed an organic-inorganic double-network conductive hydrogel using acrylic-modified bentonite (AABT) as a key component.The incorporation of AABT significantly enhanced the mechanical properties of the ATHG@LiCl hydrogel,achieving an impressive stretchability of 4000% and tensile strength of 250 kPa.Moreover,it improved the electrical conductivity of the hydrogel to a maximum of 1.53 mS/cm.The catechol structure of tannic acid (TA) further augmented the adhesive properties of the ATHG@LiCl hydrogel toward various substrates such as copper,iron,glass,plastic,wood,and pigskin.The addition of lithium chloride (LiCl) and dimethyl sulfoxide(DMSO) endowed the hydrogel with exceptional freezing resistance and flexibility,even at low temperatures of-20℃.Remarkably,the hydrogel maintained a conductivity of 0.53 mS/cm under these conditions,surpassing the performance of many other reported hydrogels.Furthermore,the ATHG@LiCl hydrogel demonstrated outstanding characteristics,such as high sensitivity (gauge factor GF=4.50),excellent transparency (90%),and reliable strain-sensing capabilities,indicating that the ATHG@LiCl hydrogel is a highly promising candidate for flexible wearable soft materials,offering significant advancements in both functionality and performance.展开更多
Toray Industries,Inc.announced that from this April,it will im-plement the mass balance approach in manufacturing its TORAY-LON TMacrylic staple fiber.This method attributes properties fromboth biomass and plastic was...Toray Industries,Inc.announced that from this April,it will im-plement the mass balance approach in manufacturing its TORAY-LON TMacrylic staple fiber.This method attributes properties fromboth biomass and plastic waste,contributing to sustainabillty.Thecompany has already secured ISCC(nternational Sustainability&Carbon Certification)PLUScertification for this initiative.展开更多
Power cables are important pieces of equipment for energy transmission,but achieving a good balance between flame retardancy and mechanical properties of cable sheaths remains a challenge.In this work,a novel intumesc...Power cables are important pieces of equipment for energy transmission,but achieving a good balance between flame retardancy and mechanical properties of cable sheaths remains a challenge.In this work,a novel intumescent flame retardant(IFR)system containing silicone-containing macromolecular charring agent(Si-MCA)and ammonium polyphosphate(APP)was designed to synergistically improve the flame retardancy and mechanical properties of ethylene-butyl acrylate copolymer(EBA)composites.The optimal mass ratio of APP/Si-MCA was 3/1 in EBA composites(EBA/APP-Si-31),corresponding to the best flame retardancy with 31.2% of limited oxygen index(LOI),V-0 rating in UL-94 vertical burning test,and 76.4%reduction on the peak of heat release rate(PHRR)in cone calorimeter test.The enhancement mechanism was attributed to the synergistic effect of APP/Si-MCA during combustion,including the radical-trapping effect,the dilution effect of non-flammable gases,and the barrier effect of the intumescent char layer.Meanwhile,the tensile results indicated that EBA/APP-Si-31 also exhibited good mechanical properties with the addition of maleic anhydride-grafted polyethylene(PE-g-MA)as the compatibilizer.Thus,the APP/Si-MCA combination is an effective IFRs system for preparing high-performance EBA composites,and it will promote their applications as cable sheath materials.展开更多
The PAL was synthesized with BA,MMA and some monomers containing carboxyl groups（for example,acrylic acid（AA） and methacrylic acid（MAA）） as co-monomers by semi-continuous seeded emulsion polymerization technique...The PAL was synthesized with BA,MMA and some monomers containing carboxyl groups（for example,acrylic acid（AA） and methacrylic acid（MAA）） as co-monomers by semi-continuous seeded emulsion polymerization technique.The influences of alkalinization temperature,the feeding manner of AA or MAA on the particles size,rheological properties and carboxyl distribution of the latex were discussed,and the rheological mechanism was analyzed.The experimental results show that the PAL system has preferable viscosity and particle size when the alkalinization temperature is 50 ℃.Different distribution of carboxyl group in the particles and different resultant rheological properties are obtained by different feeding manner of AA or MAA into the system.The TEM images show that the particle is a smooth globe with carboxyl group concentrating on the surface and stabilized with electric double layer and nonionic adsorbed layer.The concentration of carboxyl functional group on the surface of particles can be achieved by the specific polymerization technique.The rheologyical properties are determined by accretion of particle volume and variation of the two phase volume ratio resulted from the carboxyl group spreading layer.展开更多
Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such mat...Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.展开更多
A series of acrylonitrile (AN) copolymers with methyl acrylate (MA) or ethyl acrylate (EA) as comonomer (5-23 wt%) was prepared by free-radical copolymerisation. The permeability coefficients of the copolymers to oxyg...A series of acrylonitrile (AN) copolymers with methyl acrylate (MA) or ethyl acrylate (EA) as comonomer (5-23 wt%) was prepared by free-radical copolymerisation. The permeability coefficients of the copolymers to oxygen and carbon dioxide were measured at 1.0 MPa and at 30 degrees C, and those to water vapor also measured at 100% relative humidity and at 30 degrees C. All the AN/acrylic copolymers are semicrystalline. As the acrylate content increase, the permeability coefficients of the copolymers to oxygen and carbon dioxide are increased progressively, but those to water vapor are decreased progressively. The gas permeability coefficients of the polymers were correlated with free-volume fractions or the ratio of free volume to cohesive energy.展开更多
Hydroxyl-epoxy phosphate （HEP） as a reactive corrosion inhibitor was innovatively synthe- sized by the reaction of bisphenol A epoxy resin with phosphoric acid. HEP was mixed with hydroxyl acrylate resin, and crossl...Hydroxyl-epoxy phosphate （HEP） as a reactive corrosion inhibitor was innovatively synthe- sized by the reaction of bisphenol A epoxy resin with phosphoric acid. HEP was mixed with hydroxyl acrylate resin, and crosslinked with waterborne isocyanate curing agent, which was used to form waterborne HEP/acrylic polyurethane composite （HEP-APU） coatings on Q235 steel surfaces. Electrochemical impedance spectroscopy and polarization curves were applied to analyze the corrosion behavior of the HEP-APU coatings in 3.5wt% NaCl solutions. The results indicated that the HEP-APU coatings show a superior passivation property and efficient corrosion protection of Q235 steel. The waterborne acrylic polyurethane coating containing 0.5wt% HEP exhibited the best corrosion performance among all the coating specimens. The improved flash-rust resistance can be attributed to the introduction of the phosphate group which could form phosphate film on the steel substrate.展开更多
Copolymer of maleic acid and acrylic acid （PMA-100）, combining with polyvinyl butyral （PVB） ultrafiltration membrane was used for the removal of Mn（II） from waste water by complexation-ultrafiltration. The carbo...Copolymer of maleic acid and acrylic acid （PMA-100）, combining with polyvinyl butyral （PVB） ultrafiltration membrane was used for the removal of Mn（II） from waste water by complexation-ultrafiltration. The carboxylic group content of PMA-100 and the rate of complexation reaction were measured. Effects of the mass ratio of PMA-100 to Mn（II） （n）, pH, background electrolyte, etc on the rejection rate （R） and permeate flux （J） were investigated. The results show that carboxylic group content of PMA-100 is 9.5 mmol/g. The complexation of Mn（II） with PMA-100 is rapid and completed within 5 min at pH 6.0. Both R and J increase with pH increasing in the range of 2.5-7.0, and R increases with the increase of n at pH 6.0 while J is little affected. The background electrolyte leads to the decrease of R, and CaCl2 has much greater effect on R than NaCl at the same ionic strength.展开更多
Two kinds of UV curable polyurethane acrylate oligomers （PUPA and PUCA） were synthesized via the addition reaction between isophorone diisocyanate （IPDI） and polyethylene glycol monoacrylate （PEA6） or polycaprol...Two kinds of UV curable polyurethane acrylate oligomers （PUPA and PUCA） were synthesized via the addition reaction between isophorone diisocyanate （IPDI） and polyethylene glycol monoacrylate （PEA6） or polycaprolactone modified hydroxyethyl acrylate （PCLA2）. The structures of PUPA and PUCA were characterized by Fourier transform infrared spectroscopy （FT-IR）, IH nuclear magnetic resonance （^H NMR）, gel permeation chromatography （GPC） and differential scanning calorimeter （DSC）, and the thermal stability and dynamic mechanical thermal properties of their cured films were measured by thermogravimetric analysis （TGA） and dynamic mechanical analysis （DMA）, respectively. The viscosity of the oligomers and mechanical properties of the cured films were also studied. The results show that both oligomers have narrow molecular weight distribution. The viscosity of PUPA is 2.310 Pa.s at 25 ℃, while that of PUCA is： up to 3.980 Pa-s. The UV cured PUPA and PUCA films have homogeneous phase structure, and the PUCA film shows higher glass transition temperature and storage modulus. Furthermore, the PUCA film possesses better mechanical properties than PUPA, while the latter shows better alkali resistance.展开更多
UV-curable hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion （HBPUA-PUDA/SiO2） was prepared with isophorone diisocyanate （IPDI）, hyperbranched polyester Boltorn H20 （H20）, hydroxy-ethyl...UV-curable hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion （HBPUA-PUDA/SiO2） was prepared with isophorone diisocyanate （IPDI）, hyperbranched polyester Boltorn H20 （H20）, hydroxy-ethyl acrylate （HEA）, polyethyleneglycol （PEG-200）and nano-SiO2. The UV curing kinetics of the films was investigated by FTIR. The results show that the curing speed of the films increases with the adding of nano-SiO2 and decreases with the adding of PUDA due to the slower chain movement. The thermal stability of the HBPUA-PUDA/SiO2 films was studied by using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy （TGA/FTIR）. The results show that all films exhibit two degradation stages located at about 320 and 440℃ corresponding to the degradation for hard segments of urethane-acrylate and the degradation for soft segment and polyester core. In addition, the results from the analysis of TGA/FTIR also indicate that the decomposition temperature of HBPUA-PUDA/SiO2 film is 15℃ higher than that obtained for pure polymer. The degradation mechanism was proposed according to TGA/FTIR results.展开更多
A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-...A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were in the following： the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ~C, and the molar ratio of PPGGE to AA was 1：2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized PPGGEA to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 29.99 MPa of tensile strength, 834.27 MPa of the Young＇s modulus and 5.66% of elongation at tear.展开更多
AIM: To conduct a Meta-analysis pooling randomized controlled trials(RCTs) to compare hydrophobic with hydrophilic acrylic intraocular lenses in terms of posterior capsule opacification(PCO) development.METHODS: Elect...AIM: To conduct a Meta-analysis pooling randomized controlled trials(RCTs) to compare hydrophobic with hydrophilic acrylic intraocular lenses in terms of posterior capsule opacification(PCO) development.METHODS: Electronic databases including PubMed,Embase, and the Cochrane Library were queried from their starting till January 2020. RCTs investigating the impact of hydrophobic versus hydrophilic acrylic intraocular lenses on PCO were considered eligible in this study. The pooled effect estimates were calculated using the random-effects model.RESULTS: Thirteen RCTs comprising of 939 patients(1263 eyes) were covered in this study. Patients with hydrophobic acrylic intraocular lenses had a lower PCO score than those with a hydrophilic acrylic intraocular lenses [standard mean difference:-1.80;95% confidence interval(CI):-2.62 to-0.98;P<0.001]. Moreover, the frequency of neodymium-doped yttrium aluminum garnet(Nd:YAG)capsulotomy in patients with hydrophobic acrylic intraocular lenses was significantly lower than patients with hydrophilic acrylic intraocular lenses(relative risk: 0.38;95%CI: 0.20-0.71;P=0.003).CONCLUSION: These findings suggest that hydrophobic acrylic intraocular lenses are superior to hydrophilic acrylic intraocular lenses in patients after cataract surgery due to lower PCO score and reduced Nd:YAG capsulotomy. While similar studies are conducted by other researchers, the present study conducted subgroup analyses that show superior results with hydrophobic lenses in trials conducted in western countries.展开更多
A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine ...A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimal synthetic conditions were that the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ℃, and the molar ratio of HDGE to AA was 1︰2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-curing initiator was added to the synthesized HDGEA to prepare a kind of UV-curing coating. The mechanical properties of the UV-cured films were determined, giving 31.87 MPa of tensile strength, 871.88 MPa of Young＇s modulus and 6.77% of elongation at tear.展开更多
Polyacrylonitrile-block-poly（methyl acrylate）（P（AN-b-MA）） was synthesized by reversible addition-fragmentation chain transfer （RAFT） polymerization employing macro-RAFT agent （PAN-RAFT） as the chain transfer...Polyacrylonitrile-block-poly（methyl acrylate）（P（AN-b-MA）） was synthesized by reversible addition-fragmentation chain transfer （RAFT） polymerization employing macro-RAFT agent （PAN-RAFT） as the chain transfer agent and azobis（isobutyronitrile） （AIBN） as the initiator. A linear relationship between ln（[M]0/[M]1） and reaction time was observed. The molecular structure of P（AN-b-MA） was characterized by ^1H-NMR, element analysis, FTIR and SEC. The molecular weight distribution （MWD） was less than 1.40, the Mn could be controled from 0.733 to 4.834×10^4, and the molar content of MA in P（AN-b-MA） were from 15.6 to 75.0 percentage, respectively.展开更多
Monodisperse poly（poly（ethyleneglycol） methyl ether acrylate-co-acrylic acid） （poly（PEGMA-co-AA）） microspheres were prepared by distillation-precipitation polymerization with divinylbenzene （DVB） as crosslin...Monodisperse poly（poly（ethyleneglycol） methyl ether acrylate-co-acrylic acid） （poly（PEGMA-co-AA）） microspheres were prepared by distillation-precipitation polymerization with divinylbenzene （DVB） as crosslinker with 2,2＇- azobisisobutyronitrile （AIBN） as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.展开更多
The catalytic activities of some heteropolyacids(HPAs) in synthesizing butyl acrylate are reported. It has been demonstrated that 12 tungstophosphoric acid is the most effective catalyst among more than 20 HPA(s...The catalytic activities of some heteropolyacids(HPAs) in synthesizing butyl acrylate are reported. It has been demonstrated that 12 tungstophosphoric acid is the most effective catalyst among more than 20 HPA(salts). Various factors concerned in this reaction have been investigated. The optimum conditions have been found, that is, the molar ratio of alcohol to acid is 1.2∶1.0 , the catalyst concentration 1%(mass fraction), the reaction time 2 h, the temperature 98—124 ℃ and a certain amount of polymerization inhibitor exists.展开更多
基金supported by the National Natural Science Foundation of China(Nos.42277315,22066009)the Scientific Research Startup Fund of Hainan University(Nos.XJ2300005916,kyqd(zr)22185)+1 种基金supported by Scientific Research Project of Hainan Higher Education Institutions(No.Hnky2023-9)Innovational Fund for Scientific and Technological Personnel of Hainan Province(No.KJRC2023C12)。
文摘Synergy strategy of photocatalysts and polymer resins are promising technology for marine antifouling.However,it is still a main challenge to obtain a green,safe,and efficient antifouling coatings.Herein,carbon(graphene or CNT)modified Ti O_(2)photocatalyst was synthesized via hydrothermal and annealing process and has successfully applied in acrylate fluoroboron polymer(ABFP)composite coating.Morphology and chemical composition were detailed characterized.The graphene or CNT acted as a bridge with supplemental spatial structures(petal gaps,entanglement)and new functional groups(C-O,C-Ti-O,etc.)on Ti O_(2)particle.Carbon nanotube(CNT)modified TiO_(2)-ABFP coatings(BTCP)achieved excellent antibacterial and anti-diatom adhesion rate of 89.3%-96.70%and 99.00%-99.50%,which was 1.84-4.94-fold more than that of the single ABFP.CNT or graphene served as electronic bridges was considered as the crucial mechanism,which significantly improved the light absorption range and capacity,conductivity,and photoelectric response of Ti O_(2),and further accelerated the generation and transfer of free radicals to the surface of BTCP or FTGP.Moreover,the improvement of catalyst activity synergizes with the smooth surface,hydrophilicity,and slow hydrolysis of composite coatings,achieved long-term and efficient antifouling performance.This work provides a new insight into the modification of Ti O_(2)and antifouling mechanism of polymer coating.
基金Project supported by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(SKLGP2020Z003)。
文摘A novel composite material,Poly(IL-AA)@MIL-101(Cr),combining metal-organic framework,polymeric ionic liquid and acrylic acid,was synthesized for the selective and efficient adsorption of rare earths europium(Ⅲ)(Eu3+).Characterization of the materials was carried out using techniques such as X-ray diffraction(XRD),Fourier transform infrared(FTIR),scanning electron microscopy-energy dispersive X-ray spectroscopy(SEM-EDS),thermogravimetric analysis(TGA)and Brunauer-Emmett-Teller(BET).The results demonstrate successful incorporation of the polymeric ionic liquid onto the material surface while preserving the crystal structure and mo rphology of MIL-101(Cr).Adsorption experiments were conducted to explore parameters including equilibrium pH,initial Eu3+concentration,and duration,with comprehensive analyses of adsorption kinetics,isotherms,and mechanisms.Findings reveal that Poly(IL1-AA)@MIL-101(Cr),Poly(IL3-AA)@MIL-101(Cr),and Poly(IL5-AA)@MIL-101(Cr)achieve adsorption equilibrium for Eu3+at approximately 9 h with an equilibrium pH of 6.2.The adso rption of Eu^(3+)predominantly follows a pseudo-second-order kinetic model and Langmuir isotherm adsorption model.Moreover,the prepared composite material exhibits superior adsorption selectivity for Eu^(3+)over other metal ions in the mixture(K^(+),Mg^(2+),Ni^(2+),Co^(2+),Zn^(2+),La^(3+),and Nd^(3+)).Even after five adsorption-desorption cycles,the composite material maintains satis factory adsorption performance.
基金Funded by the National Natural Science Foundation of China(No.51873167)the Self-determined and Innovative Research Funds of WUT(No.2024-CL-B1-02)。
文摘Modified activated carbons(AS)were fabricated through the oxidation effect of ammonium persulfate and applied to the dynamic adsorption of different acrylate gas.The pore structures,surface chemical properties and surface morphology of AS were respectively characterized by N2 adsorption,Boehm titration,X-ray Photoelectron Spectroscopy(XPS)and scanning electron microscopy(SEM)techniques.After modification,the specific surface area increased from 954 to 1154 m^(2)·g^(-1).The contents of oxygen-containing functional groups on the AS surface increase obviously and have a great effect on the adsorption behavior of acrylate gases.According to the results of dynamic adsorption,the adsorption capacities of acrylates are as the following order:methyl acrylate(461.9 mg·g^(-1))>methyl methacrylate(436.9 mg·g^(-1))>butyl acrylate(381.8 mg·g^(-1)),which is attributed to the size adaptability of AS pores and acrylates.The adsorption behavior of AS for acrylate gases conforms to the Bangham model and the Temkin model.
文摘Grafting of acrylic acid (AAc) and acrylamide (AAm) onto preirradiated PP film was performed in aqueous solution of AAc and AAm, respectively. Electron beam accelerator was used as irradiation source. The effect of ferrous sulfate, sodium nitrate, methanol and glucose on the degree of grafting was demonstrated. The function of the different additives was compared by the grafting of different monomers (AAc and AAm). The results show that the four of these additives are elective on the grafting of AAc. Only two of these additives, ferrous sulfate and methanol were effective on the grafting of AAm.
基金supported by the National Natural Science Foundation of China(No,22271074)Natural Science Foundation of Hebei Province(Nos.B2023208042,B2022208032,B2021208066,E2024208084 , E2024208088)+2 种基金Science Research Project of Hebei Education Department(No.JZX2024013)Special Fund for Local Scientific and Technological Development under the Guidance of the Central Government(No.236Z3704G)Hebei Province High Level Talent Funding(No.A202001010).
文摘Flexible wearable electronic devices based on hydrogels have immense potential in a wide range of applications.However,many existing strain sensors suffer from significant limitations including poor mechanical properties,low adhesion,and insufficient conductivity.To address these challenges,this study successfully developed an organic-inorganic double-network conductive hydrogel using acrylic-modified bentonite (AABT) as a key component.The incorporation of AABT significantly enhanced the mechanical properties of the ATHG@LiCl hydrogel,achieving an impressive stretchability of 4000% and tensile strength of 250 kPa.Moreover,it improved the electrical conductivity of the hydrogel to a maximum of 1.53 mS/cm.The catechol structure of tannic acid (TA) further augmented the adhesive properties of the ATHG@LiCl hydrogel toward various substrates such as copper,iron,glass,plastic,wood,and pigskin.The addition of lithium chloride (LiCl) and dimethyl sulfoxide(DMSO) endowed the hydrogel with exceptional freezing resistance and flexibility,even at low temperatures of-20℃.Remarkably,the hydrogel maintained a conductivity of 0.53 mS/cm under these conditions,surpassing the performance of many other reported hydrogels.Furthermore,the ATHG@LiCl hydrogel demonstrated outstanding characteristics,such as high sensitivity (gauge factor GF=4.50),excellent transparency (90%),and reliable strain-sensing capabilities,indicating that the ATHG@LiCl hydrogel is a highly promising candidate for flexible wearable soft materials,offering significant advancements in both functionality and performance.
文摘Toray Industries,Inc.announced that from this April,it will im-plement the mass balance approach in manufacturing its TORAY-LON TMacrylic staple fiber.This method attributes properties fromboth biomass and plastic waste,contributing to sustainabillty.Thecompany has already secured ISCC(nternational Sustainability&Carbon Certification)PLUScertification for this initiative.
基金supported by the National Natural Science Foundation of China(52473059)Taishan Scholar Constructive Engineering Foundation of Shandong Province(tsqn202103079)Key Research and Development Plan of Shandong Province(2024TSGC0264).
文摘Power cables are important pieces of equipment for energy transmission,but achieving a good balance between flame retardancy and mechanical properties of cable sheaths remains a challenge.In this work,a novel intumescent flame retardant(IFR)system containing silicone-containing macromolecular charring agent(Si-MCA)and ammonium polyphosphate(APP)was designed to synergistically improve the flame retardancy and mechanical properties of ethylene-butyl acrylate copolymer(EBA)composites.The optimal mass ratio of APP/Si-MCA was 3/1 in EBA composites(EBA/APP-Si-31),corresponding to the best flame retardancy with 31.2% of limited oxygen index(LOI),V-0 rating in UL-94 vertical burning test,and 76.4%reduction on the peak of heat release rate(PHRR)in cone calorimeter test.The enhancement mechanism was attributed to the synergistic effect of APP/Si-MCA during combustion,including the radical-trapping effect,the dilution effect of non-flammable gases,and the barrier effect of the intumescent char layer.Meanwhile,the tensile results indicated that EBA/APP-Si-31 also exhibited good mechanical properties with the addition of maleic anhydride-grafted polyethylene(PE-g-MA)as the compatibilizer.Thus,the APP/Si-MCA combination is an effective IFRs system for preparing high-performance EBA composites,and it will promote their applications as cable sheath materials.
基金Funded by the National Natural Science Foundation of China (No.50803017)
文摘The PAL was synthesized with BA,MMA and some monomers containing carboxyl groups（for example,acrylic acid（AA） and methacrylic acid（MAA）） as co-monomers by semi-continuous seeded emulsion polymerization technique.The influences of alkalinization temperature,the feeding manner of AA or MAA on the particles size,rheological properties and carboxyl distribution of the latex were discussed,and the rheological mechanism was analyzed.The experimental results show that the PAL system has preferable viscosity and particle size when the alkalinization temperature is 50 ℃.Different distribution of carboxyl group in the particles and different resultant rheological properties are obtained by different feeding manner of AA or MAA into the system.The TEM images show that the particle is a smooth globe with carboxyl group concentrating on the surface and stabilized with electric double layer and nonionic adsorbed layer.The concentration of carboxyl functional group on the surface of particles can be achieved by the specific polymerization technique.The rheologyical properties are determined by accretion of particle volume and variation of the two phase volume ratio resulted from the carboxyl group spreading layer.
文摘Hydrogel is considered as an important material in our world nowadays as it is used in many important and significant applications such as in tissue engineering and agriculture. There are hundreds of types of such materials, where most of them can be easily prepared. The main objective of this work is to prepare one of the hydrogel types which could be very useful in the agriculture of deserts where plants in dry places require water in order to grow up. There are many places around the world where raining occurs only once or twice a year. There are also places where it does not rain at all. Therefore, hydrogels are required in order to absorb water in large quantities either during raining or irrigation instead of escaping to underground and then eject them to the roots of plants over time as the plants require watering. In this research a hydrogel based on acryl amide, Poly 2-Acrylamide-2-Methyl-1-Propane Sulphonic Acid, (PAMPS) was prepared by using different percentages of a suitable cross-linking agent, Methylene-bis-Acrylamide. The cross-linker content is very important factor affects the rate and amount of absorbed water. The highest amount of absorbed water at 25°C was observed by using 0.6% cross-linking agent based on monomer mass. The temperature of absorbed water and its pH value are also essential factors that affect the rate and the amount of absorbed water and were investigated in this work. The highest amount of absorbed water was recorded at pH = 12 and at 60°C. The amount and the rate of water absorbed by Sodium Polyacrylate Hydrogel were also investigated at 25°C. The agriculture applications of hydrogel based on Sodium Polyacrylate were examined using Fenugreek seeds implanting.
基金The project is supported by the National Natural Science Foundation of China
文摘A series of acrylonitrile (AN) copolymers with methyl acrylate (MA) or ethyl acrylate (EA) as comonomer (5-23 wt%) was prepared by free-radical copolymerisation. The permeability coefficients of the copolymers to oxygen and carbon dioxide were measured at 1.0 MPa and at 30 degrees C, and those to water vapor also measured at 100% relative humidity and at 30 degrees C. All the AN/acrylic copolymers are semicrystalline. As the acrylate content increase, the permeability coefficients of the copolymers to oxygen and carbon dioxide are increased progressively, but those to water vapor are decreased progressively. The gas permeability coefficients of the polymers were correlated with free-volume fractions or the ratio of free volume to cohesive energy.
文摘Hydroxyl-epoxy phosphate （HEP） as a reactive corrosion inhibitor was innovatively synthe- sized by the reaction of bisphenol A epoxy resin with phosphoric acid. HEP was mixed with hydroxyl acrylate resin, and crosslinked with waterborne isocyanate curing agent, which was used to form waterborne HEP/acrylic polyurethane composite （HEP-APU） coatings on Q235 steel surfaces. Electrochemical impedance spectroscopy and polarization curves were applied to analyze the corrosion behavior of the HEP-APU coatings in 3.5wt% NaCl solutions. The results indicated that the HEP-APU coatings show a superior passivation property and efficient corrosion protection of Q235 steel. The waterborne acrylic polyurethane coating containing 0.5wt% HEP exhibited the best corrosion performance among all the coating specimens. The improved flash-rust resistance can be attributed to the introduction of the phosphate group which could form phosphate film on the steel substrate.
基金Project (21176264) supported by the National Natural Science Foundation of ChinaProject (11JJ2010) supported by Hunan Provincial Natural Science Foundation of ChinaProject (LC13076) supported by Undergraduate Innovation Foundation of Central South University,China
文摘Copolymer of maleic acid and acrylic acid （PMA-100）, combining with polyvinyl butyral （PVB） ultrafiltration membrane was used for the removal of Mn（II） from waste water by complexation-ultrafiltration. The carboxylic group content of PMA-100 and the rate of complexation reaction were measured. Effects of the mass ratio of PMA-100 to Mn（II） （n）, pH, background electrolyte, etc on the rejection rate （R） and permeate flux （J） were investigated. The results show that carboxylic group content of PMA-100 is 9.5 mmol/g. The complexation of Mn（II） with PMA-100 is rapid and completed within 5 min at pH 6.0. Both R and J increase with pH increasing in the range of 2.5-7.0, and R increases with the increase of n at pH 6.0 while J is little affected. The background electrolyte leads to the decrease of R, and CaCl2 has much greater effect on R than NaCl at the same ionic strength.
基金Project(2007168303) supported by Guangdong-Hong Kong Technology Cooperation Funding
文摘Two kinds of UV curable polyurethane acrylate oligomers （PUPA and PUCA） were synthesized via the addition reaction between isophorone diisocyanate （IPDI） and polyethylene glycol monoacrylate （PEA6） or polycaprolactone modified hydroxyethyl acrylate （PCLA2）. The structures of PUPA and PUCA were characterized by Fourier transform infrared spectroscopy （FT-IR）, IH nuclear magnetic resonance （^H NMR）, gel permeation chromatography （GPC） and differential scanning calorimeter （DSC）, and the thermal stability and dynamic mechanical thermal properties of their cured films were measured by thermogravimetric analysis （TGA） and dynamic mechanical analysis （DMA）, respectively. The viscosity of the oligomers and mechanical properties of the cured films were also studied. The results show that both oligomers have narrow molecular weight distribution. The viscosity of PUPA is 2.310 Pa.s at 25 ℃, while that of PUCA is： up to 3.980 Pa-s. The UV cured PUPA and PUCA films have homogeneous phase structure, and the PUCA film shows higher glass transition temperature and storage modulus. Furthermore, the PUCA film possesses better mechanical properties than PUPA, while the latter shows better alkali resistance.
文摘UV-curable hyperbranched polyurethane acrylate-polyurethane diacrylate/SiO2 dispersion （HBPUA-PUDA/SiO2） was prepared with isophorone diisocyanate （IPDI）, hyperbranched polyester Boltorn H20 （H20）, hydroxy-ethyl acrylate （HEA）, polyethyleneglycol （PEG-200）and nano-SiO2. The UV curing kinetics of the films was investigated by FTIR. The results show that the curing speed of the films increases with the adding of nano-SiO2 and decreases with the adding of PUDA due to the slower chain movement. The thermal stability of the HBPUA-PUDA/SiO2 films was studied by using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy （TGA/FTIR）. The results show that all films exhibit two degradation stages located at about 320 and 440℃ corresponding to the degradation for hard segments of urethane-acrylate and the degradation for soft segment and polyester core. In addition, the results from the analysis of TGA/FTIR also indicate that the decomposition temperature of HBPUA-PUDA/SiO2 film is 15℃ higher than that obtained for pure polymer. The degradation mechanism was proposed according to TGA/FTIR results.
基金the Innovatory Group Program of the Natural Science Foundation of Hubei Province(No.2004ABC001)the National"863"Hi-tech Foundation of China(No.2002AA6Z3083)
文摘A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were in the following： the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ~C, and the molar ratio of PPGGE to AA was 1：2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized PPGGEA to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 29.99 MPa of tensile strength, 834.27 MPa of the Young＇s modulus and 5.66% of elongation at tear.
文摘AIM: To conduct a Meta-analysis pooling randomized controlled trials(RCTs) to compare hydrophobic with hydrophilic acrylic intraocular lenses in terms of posterior capsule opacification(PCO) development.METHODS: Electronic databases including PubMed,Embase, and the Cochrane Library were queried from their starting till January 2020. RCTs investigating the impact of hydrophobic versus hydrophilic acrylic intraocular lenses on PCO were considered eligible in this study. The pooled effect estimates were calculated using the random-effects model.RESULTS: Thirteen RCTs comprising of 939 patients(1263 eyes) were covered in this study. Patients with hydrophobic acrylic intraocular lenses had a lower PCO score than those with a hydrophilic acrylic intraocular lenses [standard mean difference:-1.80;95% confidence interval(CI):-2.62 to-0.98;P<0.001]. Moreover, the frequency of neodymium-doped yttrium aluminum garnet(Nd:YAG)capsulotomy in patients with hydrophobic acrylic intraocular lenses was significantly lower than patients with hydrophilic acrylic intraocular lenses(relative risk: 0.38;95%CI: 0.20-0.71;P=0.003).CONCLUSION: These findings suggest that hydrophobic acrylic intraocular lenses are superior to hydrophilic acrylic intraocular lenses in patients after cataract surgery due to lower PCO score and reduced Nd:YAG capsulotomy. While similar studies are conducted by other researchers, the present study conducted subgroup analyses that show superior results with hydrophobic lenses in trials conducted in western countries.
基金Funded by the Natural Science Foundation of Jiangxi Province (No.2008GZC0021)the National "863" Hi-tech Foundation of China (No.2002AA6Z3083)
文摘A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimal synthetic conditions were that the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ℃, and the molar ratio of HDGE to AA was 1︰2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-curing initiator was added to the synthesized HDGEA to prepare a kind of UV-curing coating. The mechanical properties of the UV-cured films were determined, giving 31.87 MPa of tensile strength, 871.88 MPa of Young＇s modulus and 6.77% of elongation at tear.
文摘Polyacrylonitrile-block-poly（methyl acrylate）（P（AN-b-MA）） was synthesized by reversible addition-fragmentation chain transfer （RAFT） polymerization employing macro-RAFT agent （PAN-RAFT） as the chain transfer agent and azobis（isobutyronitrile） （AIBN） as the initiator. A linear relationship between ln（[M]0/[M]1） and reaction time was observed. The molecular structure of P（AN-b-MA） was characterized by ^1H-NMR, element analysis, FTIR and SEC. The molecular weight distribution （MWD） was less than 1.40, the Mn could be controled from 0.733 to 4.834×10^4, and the molar content of MA in P（AN-b-MA） were from 15.6 to 75.0 percentage, respectively.
基金This work was supported in part by the National Science Foundation of China (No. 20504015)the starting project for young teachers from the Ministry of Education, China.
文摘Monodisperse poly（poly（ethyleneglycol） methyl ether acrylate-co-acrylic acid） （poly（PEGMA-co-AA）） microspheres were prepared by distillation-precipitation polymerization with divinylbenzene （DVB） as crosslinker with 2,2＇- azobisisobutyronitrile （AIBN） as initiator in neat acetonitrile without stirring. Under various reaction conditions, four distinct morphologies including the sol, microemulsion, microgels and microspheres were formed during the distillation of the solvent from the reaction system. A 2D morphological map was established as a function of crosslinker concentration and the polar monomer AA concentration, in comonomer feed in the transition between the morphology domains. The effect of the covalent crosslinker DVB on the morphology of the polymer network was investigated in detail at AA fraction of 40 vol%. The ratios of acid to ethylene oxide units presenting in the comonomers dramatically affected the polymer-polymer interaction and hence the morphology of the resultant polymer network. The covalent crosslinking by DVB and the hydrogen bonding crosslinking between two acid units as well as between the acid and ethylene oxide unit played key roles in the formation of monodisperse polymer microspheres.
文摘The catalytic activities of some heteropolyacids(HPAs) in synthesizing butyl acrylate are reported. It has been demonstrated that 12 tungstophosphoric acid is the most effective catalyst among more than 20 HPA(salts). Various factors concerned in this reaction have been investigated. The optimum conditions have been found, that is, the molar ratio of alcohol to acid is 1.2∶1.0 , the catalyst concentration 1%(mass fraction), the reaction time 2 h, the temperature 98—124 ℃ and a certain amount of polymerization inhibitor exists.
