This paper presents an optimal operation method for embedded DC interconnections based on low-voltage AC/DC distribution areas(EDC-LVDA)under three-phase unbalanced compensation conditions.It can optimally determine t...This paper presents an optimal operation method for embedded DC interconnections based on low-voltage AC/DC distribution areas(EDC-LVDA)under three-phase unbalanced compensation conditions.It can optimally determine the transmission power of the DC and AC paths to simultaneously improve voltage quality and reduce losses.First,considering the embedded interconnected,unbalanced power structure of the distribution area,a power flow calculation method for EDC-LVDA that accounts for three-phase unbalanced compensation is introduced.This method accurately describes the power flow distribution characteristics under both AC and DC power allocation scenarios.Second,an optimization scheduling model for EDC-LVDA under three-phase unbalanced conditions is developed,incorporating network losses,voltage quality,DC link losses,and unbalance levels.The proposed model employs an improved particle swarm optimization(IPSO)two-layer algorithm to autonomously select different power allocation coefficients for the DC link and AC section under various operating conditions.This enables embedded economic optimization scheduling while maintaining compensation for unbalanced conditions.Finally,a case study based on the IEEE 13-node system for EDC-LVDA is conducted and tested.The results show that the proposed optimal operation method achieves a 100%voltage compliance rate and reduces network losses by 13.8%,while ensuring three-phase power balance compensation.This provides a practical solution for the modernization and upgrading of low-voltage power grids.展开更多
The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/D...The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.展开更多
Distributed photovoltaic(PV)is one of the important power sources for building a new power system with new energy as the main body.The rapid development of distributed PV has brought new challenges to the operation of...Distributed photovoltaic(PV)is one of the important power sources for building a new power system with new energy as the main body.The rapid development of distributed PV has brought new challenges to the operation of distribution networks.In order to improve the absorption ability of large-scale distributed PV access to the distribution network,the AC/DC hybrid distribution network is constructed based on flexible interconnection technology,and a coordinated scheduling strategy model of hydrogen energy storage(HS)and distributed PV is established.Firstly,the mathematical model of distributed PV and HS system is established,and a comprehensive energy storage system combining seasonal hydrogen energy storage(SHS)and battery(BT)is proposed.Then,a flexible interconnected distribution network scheduling optimization model is established to minimize the total active power loss,voltage deviation and system operating cost.Finally,simulation analysis is carried out on the improved IEEE33 node,the NSGA-II algorithm is used to solve specific examples,and the optimal scheduling results of the comprehensive economy and power quality of the distribution network are obtained.Compared with the method that does not consider HS and flexible interconnection technology,the network loss and voltage deviation of this method are lower,and the total system cost can be reduced by 3.55%,which verifies the effectiveness of the proposed method.展开更多
The large-scale integration of DC loads,such as electric vehicles and air conditioners,has increased the peak demand of the distribution network.Therefore,this paper proposes a load peak shaving operation management m...The large-scale integration of DC loads,such as electric vehicles and air conditioners,has increased the peak demand of the distribution network.Therefore,this paper proposes a load peak shaving operation management model based on interactive games among multi-stakeholders(e.g.,distribution network operator,energy storage owner and electric vehicle users)in an AC/DC hybrid distribution network.The supply and demand balance among multiple AC networks can be realized through the DC network with the help of electric vehicles and energy storage when the distribution network operator adjusts the time-of-use electricity price in the peak shaving management model.Distribution network operators aim at minimizing the peak-to-valley difference and maximizing the operation revenue while the energy storage owner and electric vehicle users seek for the greatest benefits in the interactive game process.The above game model is constructed in a master-slave framework,where the existence and uniqueness of the game equilibrium is also proved.Finally,the numerical results show that the proposed operation management model can effectively reduce the peak-to-valley differences while ensuring the best interests of all stakeholders.展开更多
Flexibly interconnected distribution networks(FIDN)offer improved operational efficiency and operational control flexibility of power distribution systems through DC interconnection links,and have gradually become the...Flexibly interconnected distribution networks(FIDN)offer improved operational efficiency and operational control flexibility of power distribution systems through DC interconnection links,and have gradually become the main form of distribution networks.Aiming at the impact of constant power loads and converter transmission power variations in FIDN system stability,this paper presents an impedance reshaping based stability analysis and stabilization control to enhance the stability of the interconnected system and improve the system’s dynamic load response capability.Firstly,a small-single based equivalent impedance model of FIDN system,which consists flexibly interconnected equipment,energy storage,PV units,and constant power loads,is presented,and the total output and input impedance of the DC distribution network are derived.Secondly,the impacts of constant power loads and transmission power variations on the small-signal stability of FIDN system are analyzed through Nyquist stability curves using the impedance ratio criterion.Then,an impedance reshaping-based stability enhancement strategy for the FIDN system is proposed,which can significantly improve the system stability under the operating conditions of constant power loads and transmission power variations.Finally,a MATLAB/Simulink simulation model is built and tested.The results demonstrate that the proposed impedance reshaping strategy effectively mitigates voltage dips,surges,and DC bus fluctuations,shortens transient responses under power variations,and enables rapid stability recovery with reduced voltage drop during severe AC sags.展开更多
考虑到海上风电出力的随机性以及日益突出的生态环境问题,以含柔性直流输电技术(voltagesource converter high voltage direct current,VSC-HVDC)的交直流系统为研究对象,提出了考虑条件风险价值(conditional valueatrisk,CVaR)的两阶...考虑到海上风电出力的随机性以及日益突出的生态环境问题,以含柔性直流输电技术(voltagesource converter high voltage direct current,VSC-HVDC)的交直流系统为研究对象,提出了考虑条件风险价值(conditional valueatrisk,CVaR)的两阶段分布鲁棒低碳经济优化模型,构建了基于Kullback-Leibler(KL)散度的概率分布模糊集,同时利用条件风险价值量化了极端场景下的尾部风险,使得模型能够同时考虑概率分布不确定性以及处于最坏概率分布中极端场景下的尾部损失;此外,将阶梯型碳交易机制并入所提分布鲁棒模型中,通过合理利用柔性资源和储能装置,增强系统运行的灵活性,在兼顾运行风险的前提下,降低碳排放量的目标。再者,为了提高计算效率,在列和约束生成算法(column-and-constraint generation method,C&CG)和Multi-cut Benders分解算法的基础上提出了双循环分解算法。最后,在基于改进的IEEE RTS 79测试系统中验证了所提模型及算法的有效性。展开更多
The upscaling requirements of energy transition highlight the urgent need for ramping up renewables and boosting system efficiencies.However,the stochastic nature of excessive renewable energy resources has challenged...The upscaling requirements of energy transition highlight the urgent need for ramping up renewables and boosting system efficiencies.However,the stochastic nature of excessive renewable energy resources has challenged stable and efficient operation of the power system.Battery energy storage systems(BESSs)have been identified as critical to mitigate random fluctuations,unnecessary green energy curtailment and load shedding with rapid response and flexible connection.On the other hand,an AC/DC hybrid distribution system can offer merged benefits in both AC and DC subsystems without additional losses during AC/DC power conversion.Therefore,configuring BESSs on an AC/DC distribution system is wellpositioned to meet challenges brought by carbon reductions in an efficient way.A bi-level optimization model of BESS capacity allocation for AC/DC hybrid distribution systems,considering the flexibility of voltage source converters(VSCs)and power conversion systems(PCSs),has been established in this paper to address the techno-economic issues that hindered wide implementation.The large-scale nonlinear programming problem has been solved utilizing a genetic algorithm combined with second-order cone programming.Rationality and effectiveness of the model have been verified by setting different scenarios through case studies.Simulation results have demonstrated the coordinated operation of BESS and AC/DC hybrid systems can effectively suppress voltage fluctuations and improve the cost-benefit of BESSs from a life cycle angle.展开更多
The concept of a flexible power electronics substation(FPES)was first applied in the Zhangbei DC distribution network demonstration project.As a multi-port power electronics transformer(PET)with different AC and DC vo...The concept of a flexible power electronics substation(FPES)was first applied in the Zhangbei DC distribution network demonstration project.As a multi-port power electronics transformer(PET)with different AC and DC voltage levels,the FPES has adopted a novel topology integrating modular multilevel converter(MMC)and four-winding medium frequency transformer(FWMFT)based multiport DC-DC converter,which can significantly reduce capacitance in each sub-module(SM)of a MMC and also save space and cost.In this paper,in order to accelerate speed of electromagnetic transient(EMT)simulations of FPES based hybrid AC/DC distribution systems,an averaged-value model(AVM)is proposed for efficient and accurate representation of FPES.Assume that all SM capacitor voltages are perfectly balanced in the MMC,then the MMC behavior can be modeled using controlled voltage sources based on modulation voltages from control systems.In terms of the averaged current transfer characteristics among the windings of the FWMFT,we consider that all multiport DC-DC converters are controlled with the same dynamics,a lumped averaged model using controlled current and voltage sources has been developed for these four-port DC-DC converters connected to the upper or lower arms of the MMC.The presented FPES AVM model has been tested and validated by comparison with a detailed IGBT-based EMT model.Results show that the AVM is significantly more efficient while maintaining its accuracy in an EMT simulation.展开更多
The increasing flexibility of active distribution systems(ADSs)coupled with the high penetration of renewable distributed generators(RDGs)leads to the increase of the complexity.It is of practical significance to achi...The increasing flexibility of active distribution systems(ADSs)coupled with the high penetration of renewable distributed generators(RDGs)leads to the increase of the complexity.It is of practical significance to achieve the largest amount of RDG penetration in ADSs and maintain the optimal operation.This study establishes an alternating current(AC)/direct current(DC)hybrid ADS model that considers the dynamic thermal rating,soft open point,and distribution network reconfiguration(DNR).Moreover,it transforms the optimal dispatching into a second-order cone programming problem.Considering the different control time scales of dispatchable resources,the following two-stage dispatching framework is proposed.d dispatch uses hourly input data with the goal(1)The day-ahea of minimizing the grid loss and RDG dropout.It obtains the optimal 24-hour schedule to determine the dispatching plans for DNR and the energy storage system.(2)The intraday dispatch uses 15-min input data for 1-hour rolling-plan dispatch but only executes the first 15 min of dispatching.To eliminate error between the actual operation and dispatching plan,the first 15 min is divided into three 5-min step-by-step executions.The goal of each step is to trace the tie-line power of the intraday rolling-plan dispatch to the greatest extent at the minimum cost.The measured data are used as feedback input for the rolling-plan dispatch after each step is executed.A case study shows that the comprehensive cooperative ADS model can release the line capacity,reduce losses,and improve the penetration rate of RDGs.Further,the two-stage dispatching framework can handle source-load fluctuations and enhance system stability.展开更多
Hybrid AC/DC distribution networks are promising candidates for future applications due to their rapid advancement in power electronics technology.They use interface converters(IFCs)to link DC and AC distribution netw...Hybrid AC/DC distribution networks are promising candidates for future applications due to their rapid advancement in power electronics technology.They use interface converters(IFCs)to link DC and AC distribution networks.However,the networks possess drawbacks with AC voltage and frequency offsets when transferring from grid-tied to islanding modes.To address these problems,this paper proposes a simple but effective strategy based on the reverse droop method.Initially,the power balance equation of the distribution system is derived,which reveals that the cause of voltage and frequency offsets is the mismatch between the IFC output power and the rated load power.Then,the reverse droop control is introduced into the IFC controller.By using a voltage-active power/frequency-reactive power(U-P/f-Q)reverse droop loop,the IFC output power enables adaptive tracking of the rated load power.Therefore,the AC voltage offset and frequency offset are suppressed during the transfer process of operational modes.In addition,the universal parameter design method is discussed based on the stability limitations of the control system and the voltage quality requirements of AC critical loads.Finally,simulation and experimental results clearly validate the proposed control strategy and parameter design method.展开更多
1|INTRODUCTION The new-type power system,with a strong,intelligent and flexible grid as its hub platform,is a key carrier for achieving the goals of carbon peak and carbon neutrality.Among them,AC/DC transmission and ...1|INTRODUCTION The new-type power system,with a strong,intelligent and flexible grid as its hub platform,is a key carrier for achieving the goals of carbon peak and carbon neutrality.Among them,AC/DC transmission and distribution equipment is the core for achieving power conversion and transmission.In order to adapt to the high proportion of new energy,large-scale energy storage,and diversified flexible load,and to promote the high-quality construction of the new-type power system,it is urgent to carry out research and devel-opment on flexible and intelligent new transmission and distribution equipment.展开更多
基金supported by the key technology project of China Southern Power Grid Corporation(GZKJXM20220041)partly by the National Key Research and Development Plan(2022YFE0205300).
文摘This paper presents an optimal operation method for embedded DC interconnections based on low-voltage AC/DC distribution areas(EDC-LVDA)under three-phase unbalanced compensation conditions.It can optimally determine the transmission power of the DC and AC paths to simultaneously improve voltage quality and reduce losses.First,considering the embedded interconnected,unbalanced power structure of the distribution area,a power flow calculation method for EDC-LVDA that accounts for three-phase unbalanced compensation is introduced.This method accurately describes the power flow distribution characteristics under both AC and DC power allocation scenarios.Second,an optimization scheduling model for EDC-LVDA under three-phase unbalanced conditions is developed,incorporating network losses,voltage quality,DC link losses,and unbalance levels.The proposed model employs an improved particle swarm optimization(IPSO)two-layer algorithm to autonomously select different power allocation coefficients for the DC link and AC section under various operating conditions.This enables embedded economic optimization scheduling while maintaining compensation for unbalanced conditions.Finally,a case study based on the IEEE 13-node system for EDC-LVDA is conducted and tested.The results show that the proposed optimal operation method achieves a 100%voltage compliance rate and reduces network losses by 13.8%,while ensuring three-phase power balance compensation.This provides a practical solution for the modernization and upgrading of low-voltage power grids.
基金supported by National Key Research and Development Program of China (2016YFB0900500,2017YFB0903100)the State Grid Science and Technology Project (SGRI-DL-F1-51-011)
文摘The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.
文摘Distributed photovoltaic(PV)is one of the important power sources for building a new power system with new energy as the main body.The rapid development of distributed PV has brought new challenges to the operation of distribution networks.In order to improve the absorption ability of large-scale distributed PV access to the distribution network,the AC/DC hybrid distribution network is constructed based on flexible interconnection technology,and a coordinated scheduling strategy model of hydrogen energy storage(HS)and distributed PV is established.Firstly,the mathematical model of distributed PV and HS system is established,and a comprehensive energy storage system combining seasonal hydrogen energy storage(SHS)and battery(BT)is proposed.Then,a flexible interconnected distribution network scheduling optimization model is established to minimize the total active power loss,voltage deviation and system operating cost.Finally,simulation analysis is carried out on the improved IEEE33 node,the NSGA-II algorithm is used to solve specific examples,and the optimal scheduling results of the comprehensive economy and power quality of the distribution network are obtained.Compared with the method that does not consider HS and flexible interconnection technology,the network loss and voltage deviation of this method are lower,and the total system cost can be reduced by 3.55%,which verifies the effectiveness of the proposed method.
基金supported by the National Key R&D Program of China(Grant No.2019YFE0123600)the State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources(Grant No.LAPS21005)National Natural Science Foundation of China(Grant No.52077146).
文摘The large-scale integration of DC loads,such as electric vehicles and air conditioners,has increased the peak demand of the distribution network.Therefore,this paper proposes a load peak shaving operation management model based on interactive games among multi-stakeholders(e.g.,distribution network operator,energy storage owner and electric vehicle users)in an AC/DC hybrid distribution network.The supply and demand balance among multiple AC networks can be realized through the DC network with the help of electric vehicles and energy storage when the distribution network operator adjusts the time-of-use electricity price in the peak shaving management model.Distribution network operators aim at minimizing the peak-to-valley difference and maximizing the operation revenue while the energy storage owner and electric vehicle users seek for the greatest benefits in the interactive game process.The above game model is constructed in a master-slave framework,where the existence and uniqueness of the game equilibrium is also proved.Finally,the numerical results show that the proposed operation management model can effectively reduce the peak-to-valley differences while ensuring the best interests of all stakeholders.
基金supported by the key technology project of China Southern Power Grid Corporation(GZKJXM20220041)partly by theNational Key Research andDevelopment Plan(2022YFE0205300).
文摘Flexibly interconnected distribution networks(FIDN)offer improved operational efficiency and operational control flexibility of power distribution systems through DC interconnection links,and have gradually become the main form of distribution networks.Aiming at the impact of constant power loads and converter transmission power variations in FIDN system stability,this paper presents an impedance reshaping based stability analysis and stabilization control to enhance the stability of the interconnected system and improve the system’s dynamic load response capability.Firstly,a small-single based equivalent impedance model of FIDN system,which consists flexibly interconnected equipment,energy storage,PV units,and constant power loads,is presented,and the total output and input impedance of the DC distribution network are derived.Secondly,the impacts of constant power loads and transmission power variations on the small-signal stability of FIDN system are analyzed through Nyquist stability curves using the impedance ratio criterion.Then,an impedance reshaping-based stability enhancement strategy for the FIDN system is proposed,which can significantly improve the system stability under the operating conditions of constant power loads and transmission power variations.Finally,a MATLAB/Simulink simulation model is built and tested.The results demonstrate that the proposed impedance reshaping strategy effectively mitigates voltage dips,surges,and DC bus fluctuations,shortens transient responses under power variations,and enables rapid stability recovery with reduced voltage drop during severe AC sags.
文摘考虑到海上风电出力的随机性以及日益突出的生态环境问题,以含柔性直流输电技术(voltagesource converter high voltage direct current,VSC-HVDC)的交直流系统为研究对象,提出了考虑条件风险价值(conditional valueatrisk,CVaR)的两阶段分布鲁棒低碳经济优化模型,构建了基于Kullback-Leibler(KL)散度的概率分布模糊集,同时利用条件风险价值量化了极端场景下的尾部风险,使得模型能够同时考虑概率分布不确定性以及处于最坏概率分布中极端场景下的尾部损失;此外,将阶梯型碳交易机制并入所提分布鲁棒模型中,通过合理利用柔性资源和储能装置,增强系统运行的灵活性,在兼顾运行风险的前提下,降低碳排放量的目标。再者,为了提高计算效率,在列和约束生成算法(column-and-constraint generation method,C&CG)和Multi-cut Benders分解算法的基础上提出了双循环分解算法。最后,在基于改进的IEEE RTS 79测试系统中验证了所提模型及算法的有效性。
基金supported in part by the National Natural Science Foundation of China(No.51777134)in part by a joint project of NSFC of China and EPSRC of UK(No.52061635103 and EP/T021969/1).
文摘The upscaling requirements of energy transition highlight the urgent need for ramping up renewables and boosting system efficiencies.However,the stochastic nature of excessive renewable energy resources has challenged stable and efficient operation of the power system.Battery energy storage systems(BESSs)have been identified as critical to mitigate random fluctuations,unnecessary green energy curtailment and load shedding with rapid response and flexible connection.On the other hand,an AC/DC hybrid distribution system can offer merged benefits in both AC and DC subsystems without additional losses during AC/DC power conversion.Therefore,configuring BESSs on an AC/DC distribution system is wellpositioned to meet challenges brought by carbon reductions in an efficient way.A bi-level optimization model of BESS capacity allocation for AC/DC hybrid distribution systems,considering the flexibility of voltage source converters(VSCs)and power conversion systems(PCSs),has been established in this paper to address the techno-economic issues that hindered wide implementation.The large-scale nonlinear programming problem has been solved utilizing a genetic algorithm combined with second-order cone programming.Rationality and effectiveness of the model have been verified by setting different scenarios through case studies.Simulation results have demonstrated the coordinated operation of BESS and AC/DC hybrid systems can effectively suppress voltage fluctuations and improve the cost-benefit of BESSs from a life cycle angle.
基金This work was supported in part by the National Nature Science Foundation of China(51977142)。
文摘The concept of a flexible power electronics substation(FPES)was first applied in the Zhangbei DC distribution network demonstration project.As a multi-port power electronics transformer(PET)with different AC and DC voltage levels,the FPES has adopted a novel topology integrating modular multilevel converter(MMC)and four-winding medium frequency transformer(FWMFT)based multiport DC-DC converter,which can significantly reduce capacitance in each sub-module(SM)of a MMC and also save space and cost.In this paper,in order to accelerate speed of electromagnetic transient(EMT)simulations of FPES based hybrid AC/DC distribution systems,an averaged-value model(AVM)is proposed for efficient and accurate representation of FPES.Assume that all SM capacitor voltages are perfectly balanced in the MMC,then the MMC behavior can be modeled using controlled voltage sources based on modulation voltages from control systems.In terms of the averaged current transfer characteristics among the windings of the FWMFT,we consider that all multiport DC-DC converters are controlled with the same dynamics,a lumped averaged model using controlled current and voltage sources has been developed for these four-port DC-DC converters connected to the upper or lower arms of the MMC.The presented FPES AVM model has been tested and validated by comparison with a detailed IGBT-based EMT model.Results show that the AVM is significantly more efficient while maintaining its accuracy in an EMT simulation.
基金supported by Universiti Sains Malaysia through Research University Team(RUTeam)Grant Scheme(No.1001/PELECT/8580011)。
文摘The increasing flexibility of active distribution systems(ADSs)coupled with the high penetration of renewable distributed generators(RDGs)leads to the increase of the complexity.It is of practical significance to achieve the largest amount of RDG penetration in ADSs and maintain the optimal operation.This study establishes an alternating current(AC)/direct current(DC)hybrid ADS model that considers the dynamic thermal rating,soft open point,and distribution network reconfiguration(DNR).Moreover,it transforms the optimal dispatching into a second-order cone programming problem.Considering the different control time scales of dispatchable resources,the following two-stage dispatching framework is proposed.d dispatch uses hourly input data with the goal(1)The day-ahea of minimizing the grid loss and RDG dropout.It obtains the optimal 24-hour schedule to determine the dispatching plans for DNR and the energy storage system.(2)The intraday dispatch uses 15-min input data for 1-hour rolling-plan dispatch but only executes the first 15 min of dispatching.To eliminate error between the actual operation and dispatching plan,the first 15 min is divided into three 5-min step-by-step executions.The goal of each step is to trace the tie-line power of the intraday rolling-plan dispatch to the greatest extent at the minimum cost.The measured data are used as feedback input for the rolling-plan dispatch after each step is executed.A case study shows that the comprehensive cooperative ADS model can release the line capacity,reduce losses,and improve the penetration rate of RDGs.Further,the two-stage dispatching framework can handle source-load fluctuations and enhance system stability.
基金This work was supported by the National Key R&D Program of China(2018YFB0904700).
文摘Hybrid AC/DC distribution networks are promising candidates for future applications due to their rapid advancement in power electronics technology.They use interface converters(IFCs)to link DC and AC distribution networks.However,the networks possess drawbacks with AC voltage and frequency offsets when transferring from grid-tied to islanding modes.To address these problems,this paper proposes a simple but effective strategy based on the reverse droop method.Initially,the power balance equation of the distribution system is derived,which reveals that the cause of voltage and frequency offsets is the mismatch between the IFC output power and the rated load power.Then,the reverse droop control is introduced into the IFC controller.By using a voltage-active power/frequency-reactive power(U-P/f-Q)reverse droop loop,the IFC output power enables adaptive tracking of the rated load power.Therefore,the AC voltage offset and frequency offset are suppressed during the transfer process of operational modes.In addition,the universal parameter design method is discussed based on the stability limitations of the control system and the voltage quality requirements of AC critical loads.Finally,simulation and experimental results clearly validate the proposed control strategy and parameter design method.
文摘1|INTRODUCTION The new-type power system,with a strong,intelligent and flexible grid as its hub platform,is a key carrier for achieving the goals of carbon peak and carbon neutrality.Among them,AC/DC transmission and distribution equipment is the core for achieving power conversion and transmission.In order to adapt to the high proportion of new energy,large-scale energy storage,and diversified flexible load,and to promote the high-quality construction of the new-type power system,it is urgent to carry out research and devel-opment on flexible and intelligent new transmission and distribution equipment.
